1990 Ford F-350 Drive Shafts and Axles

Essential 1990 Ford F-350 Drive Shafts and Axles

National – Bearings (Part No.B-2012)

Bearings

from

$22.99
National Oil Seals & Bearings offer a full line of premium oil seals and bearings.

Product Features:
  • Premium bearing design matches OEM specifications
  • Precision manufactured using premium-grade steel for outstanding durability and performance
  • Available in both caged design and full complement
  • Industry leading coverage
  • Professional technicians know they can depend on National
See More

Yukon Gear – Full Floating Axle Seal For 10.25" Ford (Part No.30041)

Full Floating Axle Seal For 10.25" Ford

from

$79.99
Full floating axle seal for 10.25″ Ford.Yukon Mighty seal.

Product Features:
  • Rear axle seal
  • Fits Ford 10.25″
See More

Yukon Gear – Dana 60/70 Rear Axle Bearing And Seal Kit Replacement (Part No.10055)

Dana 60/70 Rear Axle Bearing And Seal Kit Replacement

from

$136.99
Yukon axle bearing & seal kits are specially designed for each application & use all high quality bearings & seals. Ford E350/F350 F/F Dana 60 & Dana 70 rear replacement axle bearing kit, 67-97. This axle bearing & seal kit services one side only.

Product Features:
  • Fits 1967-1997 Ford F350 and E350 rear with Dana Spicer 60 or 70
  • Includes inner and outer bearings and races and axle seal
  • Services one side
See More

National – Multi Purpose Bearing (Part No.HB-88508-A)

Multi Purpose Bearing

from

$73.99
National Oil Seals & Bearings offer a full line of premium oil seals and bearings.

Product Features:
  • Premium bearing design matches OEM specifications
  • Precision manufactured using premium-grade steel for outstanding durability and performance
  • Controlled heat treating process for lasting performance and extended bearing life
  • Industry leading coverage
  • Professional technicians know they can depend on National
See More

Dorman – Rear Drive Shaft: Greaseable, Adjustable (Part No.946-944)

Rear Drive Shaft: Greaseable, Adjustable

from

$1159.99
Replacing a drive shaft doesn’t have to be complicated. This complete drive shaft assembly is pre-balanced and ready to install with 100% new yokes, tubes, constant velocity (CV) joints and universal joints.

Product Features:
  • Direct replacement – this drive shaft is made to the original equipment dimensions for dependable fit and performance
  • 100% new – this drive shaft is made from all new components so there’s no core charge or return hassle
  • Ready to install – this drive shaft arrives pre-balanced to make installation quick and simple
  • Serviceable construction – non-staked universal joints are designed for future serviceability
See More

Yukon Gear – Replacement Yoke For Dana 30, 44, And 50 With 26 Spline And A 1350 U/Joint Size (Part No.41021)

Replacement Yoke For Dana 30, 44, And 50 With 26 Spline And A 1350 U/Joint Size

from

$289.99
Yukon replacement yoke for Dana 30, 44, and 50 with 26 spline and a 1350 U/joint size. 3.625″ snap ring span, 1.188″ cap diameter. Outside snap ring. This yoke uses straps. All Yukon yokes come with a one year warranty against manufacturing defects.

Product Features:
  • Fits Dana Spicer 30 and 44
  • 26 spline
  • 1350 u-joint size
  • Outside snap ring design
  • 3.625″ snap ring span
  • 1.188″ cap diameter
  • Strap style
See More

Spicer – Axle Shft Univ Joint (Part No.SPL55-4X)

Axle Shft Univ Joint

from

$102.99
Axle Shft Univ Joint

Spicer – Universal Joint (Part No.SPL55-3X)

Universal Joint

from

$81.99
When you see the Spicer name, you know you are buying the highest quality product available. Spicer universal joints are no exception. Dana manufactures a full line of Spicer universal joints that are engineered to ensure longer life for vehicles.
See More

National – Shaft Repair Sleeve (Part No.99125)

Shaft Repair Sleeve

from

$27.49
National® has built a reputation as one of the most respected names in the industry. We have offered premium sealing solutions for more than 75 years. Our design team keeps pace with the industry and provides advanced solutions for today’s vehicles.

Product Features:
  • Designed to repair damaged, grooved or worn shafts
  • Durable stainless steel construction for corrosion-free sealing surface that surpasses most original shaft specifications
  • Ideal for a shaft where indications of seal wear, such as tracks or grooves have developed
  • Ultra-thin construction (0.01/0.25mm wall thickness) allows original seal size to be used with minimal additional lip loading
  • Easy to install with removable flange and installation tool
  • Installation tool reduces sleeve distortion and allows for installation without removal from the shaft
See More

National – Multi Purpose Seal (Part No.482163N)

Multi Purpose Seal

from

$5.29
National has built a reputation as one of the most respected names in the industry. We have offered premium sealing solutions for more than 75 years. Our design team keeps pace with the industry and provides advanced solutions for today’s vehicles.

Product Features:
  • Low swell in hydrocarbon fluids
  • Design type: spring loaded; multi-lip
  • Provides good low temperature capability
  • Temperature range: -40°F to 225°F; -40°C to 107°C
  • Delivers quality and reliable performance for every type of repair
See More

Yukon Gear – Plug Adapter For Extra-Large Clamshell (Part No.56070)

Plug Adapter For Extra-Large Clamshell

from

$47.99
Plug adapter for extra-large clamshell. No Return.

Product Features:
  • Plug adapter for Extra Large clamshell
  • Fits carrier bearing puller
See More

Yukon Gear – The Carrier Bearing Puller (Part No.56072)

The Carrier Bearing Puller

from

$883.99
The Yukon carrier bearing Puller works with an impact gun to quickly and safely remove carrier bearings without damaging them. This unit comes with a handy bench top stand and works with up to one ton applications including Dana 70HD, Dana 80, 10.25″ & 10.5″ Ford, or GM & Chrysler 11.5″ differentials.

Product Features:
  • Carrier bearing puller
  • Works with an impact gun to safely and easliy remove carrrier bearings
See More

Yukon Gear – Drive Flange Cap For Dana 60 (Part No.32132)

Drive Flange Cap For Dana 60

from

$129.99
Product Features:
  • Drive flange cap
  • Fits Dana 60
See More

Dorman – Help – Driveshaft Flange Bolts (Part No.80992)

Driveshaft Flange Bolts

from

$20.29
This drive shaft bolt is designed to match the fit and function of the original part on specified vehicles. Made of quality materials, it is engineered for reliable performance.

Product Features:
  • Direct replacement – this engine mount bolt matches the fit and function of the factory part on specified years, makes and models
  • Ideal solution – this drive shaft bolt is a reliable replacement for an original part that is missing or has failed due to fatigue
  • Durable construction – this part is made from quality materials to ensure reliable performance and long service life
  • Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience
See More

Yukon Gear – Replacement Front Spindle For Dana 60, 92-98 Ford F350 (Part No.32267)

Replacement Front Spindle For Dana 60, 92-98 Ford F350

from

$375.99
Replacement front spindle for Dana 60, 92-98 Ford F350, 5 holes, 7″ long, 7″ flange.

Product Features:
  • Fits 1992-1998 Ford F350 with reverse rotation Dana Spicer 60 front
  • 7.00″ tall
  • 7.00″ flange
  • 5 bolt holes
See More

Yukon Gear – 4340 Chrome-Moly Replacement Outer Stub For Dana 60, ’77 And Newer Ford (Part No.21374)

4340 Chrome-Moly Replacement Outer Stub For Dana 60, '77 And Newer Ford

from

$298.99
Yukon 4340 Chrome-Moly replacement outer stub for Dana 60, ’77 and newer Ford with a length of 11-3/8″ and 35 splines. Yukon 4340 Chrome-Moly axles provide up to 50% increased strength over stock axles for use in extreme performance applications with large tires and high horsepower. Yukon’s 4340 axles are manufactured using the latest technologies and the highest quality materials to ensure high strength and long life. Limited Lifetime warranty covers manufacturing defects and axle breakage for as long as you own the vehicle. This warranty is not transferable to another party. “No Questions Asked” replacement for first warranty return, however Yukon reserves the right to either replace axle or refund original purchase price after the first warranty claim. Yukon (through Randy’s ring & pinion) makes final determination on warranty considerations.

Product Features:
  • Fits Dana Spicer 60 front in Ford trucks
  • 4340 Chromoly
  • Outer stub
  • 35 spline
  • 11.37″ from end of splines to center of u-joint bore
See More

Driveworks – Drive Shaft Center Support (Part No.S-HB-88508-A)

Drive Shaft Center Support

from

$29.49
Drive Shaft Center Support

Anchor – Center Support Bearing Motor Mount: Center, 1 Piece (Part No.6056)

Center Support Bearing Motor Mount: Center, 1 Piece

from

$22.79
Center support bearings or Carrier Support Bearings are used when the driveshaft is split into two sections. It serves as a junction on the drive shaft between the transmission and the differential allowing the driveshaft to flex, relieving stress on other drive line components. Each part is engineered and designed to OE Standards. Applicable to AUTOCAR 84-88; CHECKER 55-82; CHEV 60-12; DODGE 57-02; FORD 55-10; GMC 63-07; INTL 57-02; ISUZU 96-01; KW 81-18; MACK 80-90; MAZDA 87-94; MITS 87-09; OLDS 90-01; PLYM 80-83; PTRB 65-83; WHGM 88-95; WHIT 81-88;. Please verify your application.

Product Features:
  • MAXIMUM VIBRATION DAMPENING: Rubber cushion is made of high grade rubber that ensures maximum dampening of vibration and the ability to absorb over loads.
  • HEAVY GAUGE STEEL FRAME: The housing frame is made from heavy gauge steel with durability that extends the service life.
  • READY TO INSTALL: Most center supports include a sealed bearing and dust shield and are ready to install.
  • For Years: 1955-2018
  • Weight approx: 3 Lbs
  • BEARING ID / BORE: 1.3780 INCH / 35 MM
  • CENTERLINE: 2.28 INCH / 58 MM
  • MOUNT WIDTH: 6.62 INCH / 168 MM
  • STYLE: ROUND FRAME
  • COMPLETE MOUNT
See More

Anchor – Center Support Bearing Motor Mount: Center, 1 Piece (Part No.6038)

Center Support Bearing Motor Mount: Center, 1 Piece

from

$34.49
Center support bearings or Carrier Support Bearings are used when the driveshaft is split into two sections. It serves as a junction on the drive shaft between the transmission and the differential allowing the driveshaft to flex, relieving stress on other drive line components. Each part is engineered and designed to OE Standards. Applicable to AUTOCAR 84-88; CHEV 60-02; DODGE 57-02; FORD 55-07; GMC 63-02; INTL 57-02; KW 81-18; MACK 80-83; PTRB 65-83; WHGM 88-95; WHIT 81-88;. Please verify your application.

Product Features:
  • MAXIMUM VIBRATION DAMPENING: Rubber cushion is made of high grade rubber that ensures maximum dampening of vibration and the ability to absorb over loads.
  • HEAVY GAUGE STEEL FRAME: The housing frame is made from heavy gauge steel with durability that extends the service life.
  • READY TO INSTALL: Most center supports include a sealed bearing and dust shield and are ready to install.
  • For Years: 1955-2018
  • Weight approx: 4 Lbs
  • BEARING ID / BORE: 1.5750 INCH / 40 MM
  • CENTERLINE: 2.48 INCH / 63 MM
  • MOUNT WIDTH: 6.62 INCH / 168 MM
  • STYLE: ROUND FRAME
  • NOT PICTURED: TWO DUST SHIELDS
See More

Dorman – Rear Axle Differential Vent (Part No.924-263)

Rear Axle Differential Vent

from

$9.49
This axle vent is designed to match the fit and function of the original vent on specified vehicles, and is engineered for durability and reliable performance.

Product Features:
  • Direct replacement – this axle vent is designed to match the fit and function of the original vent on specified vehicles
  • Restores functionality – reliable replacement for an original vent that has failed due to blockage or fatigue
  • Durable construction – this part is made from quality materials to ensure reliable performance and long service life
  • Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience
See More

Yukon Gear – Axle O-Ring For Ford 10.25" & 10.5" (Part No.33465)

Axle O-Ring For Ford 10.25" & 10.5"

from

$8.99
Product Features:
  • Axle o-ring
  • Fits Ford 10.25″ and 10.5″
See More

National – Bearings (Part No.HM88610)

Bearings

from

$15.49
National Oil Seals & Bearings offer a full line of premium oil seals and bearings.

Product Features:
  • Premium bearing design matches OEM specifications
  • Precision manufactured using premium-grade steel for outstanding durability and performance
  • Crowned raceways and rollers to ensure even load distribution for maximum life
  • Industry leading coverage
  • Professional technicians know they can depend on National
See More

National – Bearings (Part No.207-L)

Bearings

from

$32.99
National Oil Seals & Bearings offer a full line of premium oil seals and bearings.

Product Features:
  • Premium bearing design matches OEM specifications
  • Precision manufactured using premium-grade steel for outstanding durability and performance
  • Controlled heat treating process for lasting performance and extended bearing life
  • Industry leading coverage
  • Professional technicians know they can depend on National
See More

National – Taper Bearing Cup (Part No.14276)

Taper Bearing Cup

from

$10.99
Manufactured with premium-grade steel, National® taper bearing cups feature crowned raceways to ensure even load distribution.

Product Features:
  • PREMIUM MATERIALS — Precision manufactured using premium-grade steel for outstanding durability and performance
  • SMOOTH ROTATION — Crowned raceways for even load distribution
  • OE-STYLE DESIGN — Engineered to meet OE specifications
  • COMPREHENSIVE COVERAGE — Industry-leading coverage for domestic and import applications
  • RIGOROUS TESTING+–+Comprehensive+testing throughout design and development processes by National engineers for quality you can count on+
See More

1990 Ford F-350 Drive Shafts and Axles

Maybe you’re in the middle of a full rebuild of that 1990 Ford F-350. Maybe you just need a couple of Drive Shafts and Axles. Either way, Advance Auto Parts has 50 different Drive Shafts and Axles in our inventory ranging from $8.99 to $1,381.99. That means you can find the exact parts or products you need to keep that 1990 Ford F-350 running smoothly.

Drive Shafts and Axles are only as good as their brand. We stock 10 different brands to make sure you have plenty of trusted parts to choose from for your 1990 Ford F-350. Spicer, National, and Dorman are just some of the brands we stock. Search for brands you know or compare prices and reviews to help you decide!

We know you’ll find the perfect Drive Shafts and Axles for your 1990 Ford F-350, but don’t take our word for it – read our customer ratings and reviews and buy with confidence. Out of the 267 reviews in this category, some of the top rated parts include Ball Bearing with 3.0 stars and Drive Shaft Center Support with 2.5 stars.

So if you’re in the market for aftermarket Drive Shafts and Axles to keep your 1990 Ford F-350 rolling for years to come, look no further. Shop online and have your products shipped direct to your door, or pick up at the nearest Advance Auto Parts location today!

Drive Shafts and Axles Brands To Make Your 1990 Ford F-350 Last

Simple repair, complete replacement, or a full rebuild. No matter the job, your 1990 Ford F-350 demands trusted brand parts and products to keep it running. Many trusted brands of Drive Shafts and Axles make up Advance Auto Parts’ inventory, and all are ready to help make your F-350 the best it can be. Be sure to browse some of our top Drive Shafts and Axles brands and parts.

Popular Dorman Drive Shafts and Axles

We carry Dorman parts in our stock across Axle Vents and Drive Shaft Support Bolts categories, plus more. For a 1990 Ford F-350, our most popular Dorman Drive Shafts and Axles include:
Rear Axle Differential Vent
from $9.49
(6)
Rear Axle Differential Vent
Axle Vents
Driveshaft Flange Bolts
from $20.29
(1)
Driveshaft Flange Bolts
Drive Shaft Support Bolts

Top 1990 Ford F-350 Drive Shafts and Axles from National

National products are another trusted brand when it comes to Drive Shafts and Axles for your 1990 Ford F-350. Popular National parts include:
Multi Purpose Bearing
from $44.99
(25)
Multi Purpose Bearing
Drive Shaft Center Supports
Multi Purpose Bearing
from $73.99
(17)
Multi Purpose Bearing
Drive Shaft Center Supports
Multi Purpose Seal
from $49.99
(5)
Multi Purpose Seal
Axle Shaft Seals

FAQs for 1990 Ford F-350 Drive Shafts and Axles

What are the most purchased Drive Shafts and Axles for the 1990 Ford F-350?

Out of 50 Drive Shafts and Axles for the 1990 Ford F-350, the most popular in our inventory are:
Universal Joint
from $42.99
(5)
Universal Joint
Axle Shaft Universal Joints
Center Support Bearing Motor Mount: Center, 1 Piece
from $22.79
(13)
Center Support Bearing Motor Mount: Center, 1 Piece
Center Support Bearings
Universal Joint
from $81.99
(7)
Universal Joint
Axle Shaft Universal Joints

What are the top-rated 1990 Ford F-350 Drive Shafts and Axles?

Top-rated Drive Shafts and Axles for your 1990 Ford F-350 based on customer reviews/ratings are:
Ball Bearing
from $19.99
(5)
Ball Bearing
“Easy Installation, Exact Fit”
Drive Shaft Center Support
from $29.49
(4)
Drive Shaft Center Support
“great part excellent service”