1990 Ford F-250 Pickup Distributors

Essential 1990 Ford F-250 Pickup Distributors

PerTronix – D9006 Flame-Thrower HEI Distributor Adjustable Vacuum Advance Canister (Part No.D9006)

D9006 Flame-Thrower HEI Distributor Adjustable Vacuum Advance Canister

from

$30.99
Vacuum Advance & LockoutThese vacuum canisters help optimize ignition advance for maximum part throttle performance and cruise speed efficiency. Our vacuum lockout plates allow for precise pickup coil position and accurate rotor phasing.

Product Features:
  • PerTronix D9006 Flame-Thrower HEI Distributor Adjustable Vacuum Advance Canister
  • These vacuum canisters help optimize ignition advance for maximum part throttle performance and cruise speed efficiency.
See More

Carquest Premium – Distributor Vacuum Advance (Part No.VBC1039)

Distributor Vacuum Advance

from

$36.99
CARQUEST premium engine management products provide the right automatic transmission speed sensor for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions. Designed to meet OE quali

Product Features:
  • Lifecycle tested to meet or exceed OE specifications
  • Direct OE replacement
  • High strength thermoplastic is resistant to shock, temperature and chemicals. Also protects internal components from moisture and contaminants.
  • Global coverage for import and/or domestic applications.
See More

Carquest Premium – Distributor Vacuum Advance (Part No.VBC1038)

Distributor Vacuum Advance

from

$48.49
The distributor is just one piece of this type of ignition system which is typically driven by the engine’s camshaft. The distributor is the device that delivers the ignition spark to the spark plugs at a precise time, and spark timing is critical. Any wear or component out of place in this type of system will result in failure. Within the distributor and mounted to it are many individual pieces which allow the distributor and system to be maintained and repaired to keep it in top working order.

Product Features:
  • All products are constructed to meet all design and operating characteristics as intended by the vehicle manufacturer.
See More

Carquest Premium – Distributor Vacuum Advance (Part No.VBC1103)

Distributor Vacuum Advance

from

$46.99
CARQUEST premium engine management products provide the right automatic transmission speed sensor for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions. Designed to meet OE quali

Product Features:
  • Lifecycle tested to meet or exceed OE specifications
  • Direct OE replacement
  • High strength thermoplastic is resistant to shock, temperature and chemicals. Also protects internal components from moisture and contaminants.
  • Global coverage for import and/or domestic applications.
See More

MSD Ignition – Distributor Gear; Ford; 302; Iron (Part No.85832)

Distributor Gear; Ford; 302; Iron

from

$42.49
This gear test fixture features variable rpm and oil pressure control allowing MSD engineers the ability to maintain the exact conditions that they want for gear tests. Severe loads can be placed on the gear and the fixture can spin up to 10,000 rpm. Features increased outer hardened layer thickness (RC 55-60). Micro polished surface for smooth contact. Proprietary formulated ductile iron. Melonite QPQ coated reduces friction and initial wear. Interstitial carbide concentration improves wear resistance and running properties.

Product Features:
  • Increased outer hardened layer thickness (RC 55-60)
  • Micro Polished Surface For Smooth Contact
  • Proprietary formulated ductile iron.
  • Melonite QPQ coated reduces friction and initial wear
  • Interstitial carbide improves wear resistance/running properties
See More

Felpro – DISTRIBUTOR MOUNTING GASKET (Part No.70194)

DISTRIBUTOR MOUNTING GASKET

from

$2.29
Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust

Product Features:
  • Meets or exceeds all original equipment specifications
  • Application specific design to ensure a perfect fit
  • Engineered for the sealing repair environment
  • Validated for fit, form and function
  • Unsurpassed quality you can trust
See More

Dorman – Help – Distributor Gears (Part No.90455)

Distributor Gears

from

$19.29
This distributor drive gear is designed to match the fit, function and appearance of the original part on specified vehicles, and is engineered for durability and reliable performance.

Product Features:
  • Direct replacement – this distributor drive gear matches the fit, function and appearance of the factory part on specified years, make and models
  • Ideal solution – this drive gear is a reliable replacement for an original part that has failed due to moisture infiltration or vibration
  • Durable construction – this assembly is made from quality components to ensure reliable performance and a long service life
  • Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience
See More

MSD Ignition – Distributor Gear; Ford 351W; Bronze (Part No.8585)

Distributor Gear; Ford 351W; Bronze

from

$83.39
MSD Bronze Distributor gears are machined from quality AMPCO 45 aluminum bronze containing 5 percent nickel. This special combination creates high-strength gear teeth that are less prone to wear even with high volume oil pumps. Features increased outer hardened layer thickness (RC 55-60). Micro polished surface for smooth contact. Proprietary formulated ductile iron. Melonite QPQ coated reduces friction and initial wear. Interstitial carbide concentration improves wear resistance and running properties.

Product Features:
  • Increased outer hardened layer thickness (RC 55-60)
  • Interstitial carbide improves wear resistance/running properties
  • Melonite QPQ coated reduces friction and initial wear
  • Proprietary formulated ductile iron.
  • Micro Polished Surface For Smooth Contact
See More

Mallory – Mallory Dual Point: 8-Ba Ford Flathead (Part No.2527501)

Mallory Dual Point: 8-Ba Ford Flathead

from

$499.99
Mechanical advance distributor calibrated for maximum performance with adjustable feature-dual point ignition. Dual point stabilized contact points eliminate point float and bounce to increase coil output. Get maximum performance at any RPM.

Product Features:
  • Brass Case Eliminate Corrosion
  • Insulation Prevent Leakage
  • Self-Lubricating Bushings
  • Material Prevents Shorts And Arcing
  • Maximum Conductivity
  • Maximum Performance At Any RPM
  • Fine Tune The Advance Curve
  • Eliminate Point Float
See More

Mallory – Mallory Unilite Dist.: 332-428 Fe Ford (Part No.3755301)

Mallory Unilite Dist.: 332-428 Fe Ford

from

$538.99
The industry standard with adjustable mechanical advance curve. Triggered by photo-optic infrared LED system. Improved combustion efficiency and economy, increased spark plug life and cold weather starting, and maintenance free operation.

Product Features:
  • Improved Combustion And Economy
  • Increased Spark Plug Life
  • Improved Cold Weather Starting
  • Maintenance Free Operation
  • Accurate Spark Timing
  • Self-Lubricating Bushings
  • Years Of Trouble-Free Service
See More

Carquest Premium – Distributor T2880: 100% New, With Cap and Rotor (Part No.T2880)

Distributor T2880: 100% New, With Cap and Rotor

from

$200.99
Carquest Premium distributors are built to meet or exceed the original equipment (OE) specifications for each application. Our distributors are built by a manufacturer that meets IATF 16949 certified framework, an internationally recognized proof of quality in the automotive industry. Each distributor is supplied with the cap, rotor and any seals needed for installation. Carquest Premium distributors are 100% new and undergo extensive validation testing to ensure long-lasting ignition performance and reliability.

Product Features:
  • Designed to meet or exceed OE specifications for fit, form and function
  • 100% new unit with no core charges
  • Precision machined shafts result in high speed accuracy and help prevent bearing failures
  • Every distributor is tested to ensure reliable and long-lasting performance
  • O-rings or gaskets included where applicable
  • Precision Engineered ignition modules and plugs ensure proper performance plus precise connection.
  • Precision machined and ground shafts assure high speed accuracy and prevent bearing failures.
  • Original Equipment Equivalent high voltage ignition coils.
  • 100% New Components and fasteners eliminate premature failures.
See More

Accel – Dist:Ford 86-93 5.0L With Module (Part No.59210)

Dist:Ford 86-93 5.0L With Module

from

$254.99
ACCEL Performance Distributors are the perfect choice for your daily driver or street machine, We know the importance of a good quality distributor that doesn’t break the bank. These distributors feature a cast aluminum housing with a sintered bronze bushings for long life. An OEM style module is included along with a high-quality gear and cap with brass terminals for many miles of trouble-free service. ACCEL Performance Distributors are built to deliver performance at a value-based price. Supplied with Black Cap! The Ford TFI ignition module supplied accepts the factory style connector.

Product Features:
  • Direct Plug In Factory Replacement Plug And Play
  • All New Cast Aluminum Housings for durability
  • OEM Style Ignition Modules for Trouble-Free Service
  • High-Quality Distributor Gears
  • Long Sintered Bushings for Long Life
  • Distributor Cap w/Brass Terminals
See More

Carquest Premium – Distributor Cap and Rotor Kit (Part No.CAC1867)

Distributor Cap and Rotor Kit

from

$20.79
Distributor Cap and Rotor Kit

Carquest Premium – Distributor Cap (Part No.CAC1063)

Distributor Cap

from

$24.99
Carquest premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.
See More

Carquest Premium – Distributor Cap Adapter (Part No.CAC1078)

Distributor Cap Adapter

from

$17.99
CARQUEST premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.
See More

Carquest Premium – Distributor Cap and Rotor Kit (Part No.CAE1893)

Distributor Cap and Rotor Kit

from

$74.99
Distributor Cap and Rotor Kit

MSD Ignition – Rotor; MSD Ford Distributors PN 8455; PN 8456 (Part No.8070)

Rotor; MSD Ford Distributors PN 8455; PN 8456

from

$11.99
This replacement rotor is injection molded from high voltage isolation material with heavy duty construction. The rotor fits MSD Ford distributors PN 8455, 8456.

Product Features:
  • Resist carbon tracking
  • Max Voltage Transfer
  • Molded From Insulated Material
  • Fits MSD PN[8455/8456]
  • Fits MSD part numbers 8455 and 8456
See More

Carquest – Distributor Rotor (Part No.D197)

Distributor Rotor

from

$12.99
Product Features:
  • High-quality direct replacement electrical connector allows you to replace only the damaged connector instead of the entire harness for a cost-effective repair
  • The terminal is manufactured with high grade materials such as copper alloy, brass, and phosphor bronze.  The housing is fabricated using polyamide resins.  All of the materials together provide the connectors with prolonged life and superior performance.
  • All electrical connectors are 100% tested for proper mechanical and electrical fit, form and function
  • Offering thousands of high-quality pigtails & sockets for nearly every electrical job
See More

Carquest – Distributor Rotor (Part No.23A1015)

Distributor Rotor

from

$3.49
High-quality products that meet OE appearance and performance to provide professional technicians and DIYers with a cost-effective solution.

Product Features:
  • High-quality products that meet OE appearance and performance to
See More

Carquest Premium – Distributor Rotor (Part No.DAA1002)

Distributor Rotor

from

$4.29
Carquest premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.
See More

Carquest Premium – Distributor Drive Gear (Part No.DGA1006)

Distributor Drive Gear

from

$35.99
CARQUEST premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.
See More

MSD Ignition – Distributor Gear; Steel; Ford 351C; 460 (Part No.85813)

Distributor Gear; Steel; Ford 351C; 460

from

$143.99
A distributor’s performance is only as good as its drive gear. MSD ignition has put a great deal of effort into researching and testing a variety of metallurgical compositions, heat treating and coatings to provide you with a durable, accurate and strong distributor gear. The result is a special iron alloy gear that is treated to a low-friction coating process. To you this means long life, an easy break-in period and reliable performance. Features micro polished surface for smooth contact. Proprietary formulated ductile iron. Melonite QPQ coated reduces friction and initial wear. Interstitial carbide concentration improves wear resistance and running properties.

Product Features:
  • Increased outer hardened layer thickness (RC 55-60)
  • Micro Polished Surface For Smooth Contact
  • Proprietary formulated ductile iron.
  • Melonite QPQ coated reduces friction and initial wear
  • Interstitial carbide improves wear resistance/running properties
See More

Carquest Premium – Distributor Drive Gear (Part No.DGA1004)

Distributor Drive Gear

from

$98.99
CARQUEST premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.
See More

Mallory – Distributor Drive Gear (Part No.29421PD)

Distributor Drive Gear

from

$73.29
Mallory distributor gears are precision machined from alloy steel in our factory to exact original equipment specs. For use with cast flat tappet hydraulic/mechanical cams and austempered ductile iron roller cams.

Product Features:
  • Replacement Distributor Gear
See More

MSD Ignition – Distributor Gear; Ford 5.0L; with EFI; Steel (Part No.85834)

Distributor Gear; Ford 5.0L; with EFI; Steel

from

$145.99
A distributor’s performance is only as good as its drive gear. MSD ignition has put a great deal of effort into researching and testing a variety of metallurgical compositions, heat treating and coatings to provide you with a durable, accurate and strong distributor gear. The result is a special iron alloy gear that is treated to a low-friction coating process. To you this means long life, an easy break-in period and reliable performance. Features micro polished surface for smooth contact. Proprietary formulated ductile iron. Melonite QPQ coated reduces friction and initial wear. Interstitial carbide concentration improves wear resistance and running properties.

Product Features:
  • Increased outer hardened layer thickness (RC 55-60)
  • Micro Polished Surface For Smooth Contact
  • Proprietary formulated ductile iron.
  • Melonite QPQ coated reduces friction and initial wear
  • Interstitial carbide improves wear resistance/running properties
See More

MSD Ignition – Distributor Gear; Ford 351C; 460; Iron (Part No.85812)

Distributor Gear; Ford 351C; 460; Iron

from

$42.49
This gear test fixture features variable rpm and oil pressure control allowing MSD engineers the ability to maintain the exact conditions that they want for gear tests. Severe loads can be placed on the gear and the fixture can spin up to 10,000 rpm. Features increased outer hardened layer thickness (RC 55-60). Micro polished surface for smooth contact. Proprietary formulated ductile iron. Melonite QPQ coated reduces friction and initial wear. Interstitial carbide concentration improves wear resistance and running properties.

Product Features:
  • Increased outer hardened layer thickness (RC 55-60)
  • Micro Polished Surface For Smooth Contact
  • Proprietary formulated ductile iron.
  • Melonite QPQ coated reduces friction and initial wear
  • Interstitial carbide improves wear resistance/running properties
See More

1990 Ford F-250 Pickup Distributors

Maybe you’re in the middle of a full rebuild of that 1990 Ford F-250 Pickup. Maybe you just need a couple of Distributors. Either way, Advance Auto Parts has 78 different Distributors in our inventory ranging from $4.99 to $593.99. That means you can find the exact parts or products you need to keep that 1990 Ford F-250 Pickup running smoothly.

Distributors are only as good as their brand. We stock 9 different brands to make sure you have plenty of trusted parts to choose from for your 1990 Ford F-250 Pickup. Carquest, Carquest Premium, and Driveworks are just some of the brands we stock. Search for brands you know or compare prices and reviews to help you decide!

We know you’ll find the perfect Distributors for your 1990 Ford F-250 Pickup, but don’t take our word for it – read our customer ratings and reviews and buy with confidence. Out of the 222 reviews in this category, some of the top rated parts include Distributor T2886: 100% New, With Cap and Rotor with 4.1 stars and Distributor Cap with 4.0 stars.

So if you’re in the market for aftermarket Distributors to keep your 1990 Ford F-250 Pickup rolling for years to come, look no further. Shop online and have your products shipped direct to your door, or pick up at the nearest Advance Auto Parts location today!

Distributors Brands To Make Your 1990 Ford F-250 Pickup Last

Simple repair, complete replacement, or a full rebuild. No matter the job, your 1990 Ford F-250 Pickup demands trusted brand parts and products to keep it running. Many trusted brands of Distributors make up Advance Auto Parts’ inventory, and all are ready to help make your F-250 Pickup the best it can be. Be sure to browse some of our top Distributors brands and parts.

Popular MSD Ignition Distributors

We carry MSD Ignition parts in our stock across Distributor Cap Kits categories, plus more. For a 1990 Ford F-250 Pickup, our most popular MSD Ignition Distributors include:
Distributor Cap; Ford HEI
from $52.99
(1)
Distributor Cap; Ford HEI
Distributor Cap Kits

Top 1990 Ford F-250 Pickup Distributors from Carquest

Carquest products are another trusted brand when it comes to Distributors for your 1990 Ford F-250 Pickup. Popular Carquest parts include:
Distributor Cap
from $19.05
(28)
Distributor Cap
Distributor Cap Kits
Distributor Cap
from $18.05
(22)
Distributor Cap
Distributor Cap Kits
Distributor Rotor
from $7.99
(12)
Distributor Rotor
Distributor Rotor Buttons

FAQs for 1990 Ford F-250 Pickup Distributors

What are the most purchased Distributors for the 1990 Ford F-250 Pickup?

Out of 78 Distributors for the 1990 Ford F-250 Pickup, the most popular in our inventory are:
Distributor Cap
from $15.99
This product is not rated
Distributor Cap
Distributor Cap Kits
Distributor Cap
from $16.05
(1)
Distributor Cap
Distributor Cap Kits
Distributor Rotor
from $11.05
(1)
Distributor Rotor
Distributor Rotor Buttons

What are the top-rated 1990 Ford F-250 Pickup Distributors?

Top-rated Distributors for your 1990 Ford F-250 Pickup based on customer reviews/ratings are:
Distributor T2886: 100% New, With Cap and Rotor
from $209.99
(21)
Distributor T2886: 100% New, With Cap and Rotor
“Fit perfect, easy install”
Distributor Cap
from $18.05
(11)
Distributor Cap
“Always good to replace old one.”
Distributor Rotor
from $12.99
(11)
Distributor Rotor
“Works like it should”