1990 Dodge W350 Drive Shafts and Axles
More 1990 Dodge W350 Drive Shafts and Axles
Find your specific 1990 Dodge W350 original or aftermarket Drive Shafts and Axles below. Order your parts online and have delivered to your home or pick up in-store at Advance Auto.
Essential 1990 Dodge W350 Drive Shafts and Axles
Victor Reinz – Drive Axle Shaft Flange Gasket (Part No.71-13861-00)
from
$3.29
With Victor Reinz gaskets, you can be sure you are getting sealing solutions that deliver OE quality gasket technology and engineering. That is because Victor Reinz is an original equipment supplier and the trusted choice of manufacturers the world over, offering broad coverage for foreign and domestic cars and trucks. In Victor Reinz gasket sets, you get the right combination of components needed for fast, long-lasting repairs.
Product Features:
See More
Product Features:
- Choosing Victor Reinz assures getting OE quality parts in gaskets sets that have the coverage, contents, packaging and electronic cataloging to best meet the needs of the aftermarket.
Cardone – Front Drive Shaft: Not Greasable, Direct Replacement (Part No.65-9318)
from
$377.99
CARDONE Remanufactured Prop Shafts are engineered using the most stringent quality processes to deliver smooth, consistent performance in any driving condition. Original designs are scrutinized for potential improvement, and where applicable, design upgrades are implemented to produce a more durable part than the original. All critical components are tested to ensure proper function. Additionally, all CARDONE Prop Shafts are 100% dynamically balanced, resulting in vibration-free performance at all speeds.
Product Features:
See More
Product Features:
- Built to match O.E. form, fit and function.
- 100% NEW universal joints are installed to ensure proper fit and optimal performance.
- All slip yokes are lubricated to prevent premature wear.
- Units are 100% dynamically balanced at 3200 RPMs for vibration-free operation and increased joint life.
Remanufactured – Drive Shaft/Propeller Shaft Assembly (Part No.CV364)
Spicer – Axle Shft Univ Joint (Part No.SPL55-4X)
from
$102.99
Axle Shft Univ Joint
Spicer – Universal Joint (Part No.5-160X)
from
$40.99
When you see the Spicer name, you know you are buying the highest quality product available. Spicer universal joints are no exception. Dana manufactures a full line of Spicer universal joints that are engineered to ensure longer life for vehicles.
See More
Yukon Gear – Dana 60 Semi-Float C-Clip (Part No.33247)
Yukon Gear – 9.25" Chrysler C/Clip (Part No.33075)
from
$17.99
9.25″ Chrysler C/clip, 0.205″ wide for 4137429 axle.
Product Features:
See More
Product Features:
- c-clip for Chrysler 9.25″ rear
- 0.205″ thick
USA Standard Gear – 4340 Chrome-Moly Replacement Outer Stub For Dana 60 & 70, 35 Spline, 12" Long (Part No.35095)
from
$239.99
Product Features:
See More
- Fits Dana Spicer 60 front in GM and Dodge trucks
- 4340 Chromoly
- Outer stub
- 35 spline
- 12″ from end of splines to center of u-joint bore
USA Standard Gear – 4340 Chrome-Moly Replacement Outer Stub Shaft For GM & Dodge Dana 60, 30 Spline, 12" Long (Part No.35120)
from
$167.99
Product Features:
See More
- Fits Dana Spicer 60 front in GM and Dodge trucks
- 4340 Chromoly
- Outer stub
- 30 spline
- 12″ from end of splines to center of u-joint bore
Yukon Gear – Replacement Outer Stub Axle For Dana 60 And 70 (Part No.21065)
from
$219.99
Yukon replacement outer stub axle for Dana 60 and 70 with a length of 12.0″ inches and with 35 splines. Yukon front axles come with a one year warranty against manufacturing defects.
Product Features:
See More
Product Features:
- Fits 1977-1991 GM one ton front and 1981-1993 Dodge one ton front
- Outer stub
- 35 spline
- 12″ from end of splines to center of u-joint bore
Anchor – Center Support Bearing Motor Mount: Center, 1 Piece (Part No.6038)
from
$34.49
Center support bearings or Carrier Support Bearings are used when the driveshaft is split into two sections. It serves as a junction on the drive shaft between the transmission and the differential allowing the driveshaft to flex, relieving stress on other drive line components. Each part is engineered and designed to OE Standards. Applicable to AUTOCAR 84-88; CHEV 60-02; DODGE 57-02; FORD 55-07; GMC 63-02; INTL 57-02; KW 81-18; MACK 80-83; PTRB 65-83; WHGM 88-95; WHIT 81-88;. Please verify your application.
Product Features:
See More
Product Features:
- MAXIMUM VIBRATION DAMPENING: Rubber cushion is made of high grade rubber that ensures maximum dampening of vibration and the ability to absorb over loads.
- HEAVY GAUGE STEEL FRAME: The housing frame is made from heavy gauge steel with durability that extends the service life.
- READY TO INSTALL: Most center supports include a sealed bearing and dust shield and are ready to install.
- For Years: 1955-2018
- Weight approx: 4 Lbs
- BEARING ID / BORE: 1.5750 INCH / 40 MM
- CENTERLINE: 2.48 INCH / 63 MM
- MOUNT WIDTH: 6.62 INCH / 168 MM
- STYLE: ROUND FRAME
- NOT PICTURED: TWO DUST SHIELDS
SKF – Driveshaft Support with Bearing (Part No.K1030285149SKF)
from
$190.87
Rugged SKF drive shaft support bearings are built to meet or exceed OE specifications. They are also built on the years of experience that SKF has earned designing and supplying bearings to the world’s largest OE manufacturers. Engineered and manufactured to specific application requirements that deliver precise drive shaft alignment and support. Center support bearings are pre-lubricated and sealed with metal reinforced seals to prevent contamination. Rubber support cushions are manufactured from durable rubber compounds that provide maximum support while isolating the driveline shaft from damaging vibration. Drive shaft support frames are constructed from high quality steel or aluminum that provides additional strength and long life in harsh environments.
Product Features:
See More
Product Features:
- OE Quality, fit and performance
- Precise driveshaft alignment and support
- Pre-lubricated and sealed
- Metal reinforced seals to prevent contamination
- Manufactured from durable rubber compounds
Anchor – Center Support Bearing Motor Mount: Center, 1 Piece (Part No.6056)
from
$22.79
Center support bearings or Carrier Support Bearings are used when the driveshaft is split into two sections. It serves as a junction on the drive shaft between the transmission and the differential allowing the driveshaft to flex, relieving stress on other drive line components. Each part is engineered and designed to OE Standards. Applicable to AUTOCAR 84-88; CHECKER 55-82; CHEV 60-12; DODGE 57-02; FORD 55-10; GMC 63-07; INTL 57-02; ISUZU 96-01; KW 81-18; MACK 80-90; MAZDA 87-94; MITS 87-09; OLDS 90-01; PLYM 80-83; PTRB 65-83; WHGM 88-95; WHIT 81-88;. Please verify your application.
Product Features:
See More
Product Features:
- MAXIMUM VIBRATION DAMPENING: Rubber cushion is made of high grade rubber that ensures maximum dampening of vibration and the ability to absorb over loads.
- HEAVY GAUGE STEEL FRAME: The housing frame is made from heavy gauge steel with durability that extends the service life.
- READY TO INSTALL: Most center supports include a sealed bearing and dust shield and are ready to install.
- For Years: 1955-2018
- Weight approx: 3 Lbs
- BEARING ID / BORE: 1.3780 INCH / 35 MM
- CENTERLINE: 2.28 INCH / 58 MM
- MOUNT WIDTH: 6.62 INCH / 168 MM
- STYLE: ROUND FRAME
- COMPLETE MOUNT
Yukon Gear – Flange Yoke For Chrysler 9.25" (Part No.41012)
from
$267.99
Yukon flange yoke for Chrysler 9.25″. All Yukon yokes come with a one year warranty against manufacturing defects.
Product Features:
See More
Product Features:
- Fits Chrysler 9.25″ rear
- 29 spline
- Round companion flange
Yukon Gear – Pinion Yoke Dust Shield For Dana 60 & 70 (Part No.33441)
Yukon Gear – Replacement Yoke For Dana 60 And 70 With A 1330 U/Joint Size (Part No.41024)
from
$187.99
Yukon replacement yoke for Dana 60 and 70 with a 1330 U/joint size. 3.625″ snap ring span, 1.0625″ cap diameter. Outside snap ring. This yoke uses u-bolts. All Yukon yokes come with a one year warranty against manufacturing defects. This is a strap style yoke.
Product Features:
See More
Product Features:
- Fits Dana Spicer 60, 70, 70U and 70HD
- 29 spline
- 1330 u-joint size
- 3.625″ snap ring span
- 1.062″ cap diameter
- Outside snap ring design
- Strap style
Driveworks – CENTER SUPPORT (Part No.S-HB-88108-D)
from
$36.49
CENTER SUPPORT
National – Multi Purpose Bearing (Part No.HB-88108-D)
from
$73.99
National Oil Seals & Bearings offer a full line of premium oil seals and bearings.
Product Features:
See More
Product Features:
- Premium bearing design matches OEM specifications
- Precision manufactured using premium-grade steel for outstanding durability and performance
- Controlled heat treating process for lasting performance and extended bearing life
- Industry leading coverage
- Professional technicians know they can depend on National
National – Multi Purpose Bearing (Part No.HB-88107-A)
from
$44.99
National Oil Seals & Bearings offer a full line of premium oil seals and bearings.
Product Features:
See More
Product Features:
- Premium bearing design matches OEM specifications
- Precision manufactured using premium-grade steel for outstanding durability and performance
- Controlled heat treating process for lasting performance and extended bearing life
- Industry leading coverage
- Professional technicians know they can depend on National
Yukon Gear – R1559Tv Rear Axle Bearing And Seal Kit (Part No.10001)
from
$52.99
Yukon axle bearing & seal kits are specially designed for each application & use all high quality bearings & seals. R1559TV axle bearing and seal kit, TorringtonBrand, 2.530″ OD, 1.620″ ID This axle bearing & seal kit services one side only.
Product Features:
See More
Product Features:
- Includes axle bearing and seal
- Services one side
- Torrington Brand
- 2.530″ O.D.
- 1.620″ I.D.
Yukon Gear – R1561Tv Rear Axle Bearing And Seal Kit (Part No.10002)
from
$88.99
Yukon axle bearing & seal kits are specially designed for each application & use all high quality bearings & seals. R1561TV axle bearing and seal kit, for Ford and Dodge, TorringtonBrand, 2.985″ OD, 1.700″ ID. This axle bearing & seal kit services one side only.
Product Features:
See More
Product Features:
- Fits Ford and Dodge applications
- Includes axle bearing and seal
- Torrington Brand
- Services one side
- 2.985″ O.D.
- 1.700″ I.D.
Yukon Gear – Dana 60 Front Axle Bearing And Seal Kit Replacement (Part No.10016)
from
$169.99
Yukon replacement axle bearing & seal kits are specially designed for each application & use all high quality bearings & seals. Axle bearing and seal kit for ’75 to ’93 Dana 60 and Dodge 3/4 ton truck front axle. This kit includes Timken inner and outer bearings and races along with high quality seals. Unit is sold per side and is covered for one year against manufacturing defects. This axle bearing & seal kit services one side only.
Product Features:
See More
Product Features:
- Fits 1975-1993 Dodge 3/4 ton
- Includes axle bearings, races and seal
- Services one side
Yukon Gear – Axle Seal, For 1559 Or 6408 Bearing (Part No.30201)
from
$7.99
Axle seal, for 1559 OR 6408 bearing, NOT COARSE spline 12T.Yukon Mighty seal.
Product Features:
See More
Product Features:
- Rear axle seal
- 2.530″ O.D.
Yukon Gear – Axle Seal For Semi-Floating Ford And Dodge With R1561Tv Bearing (Part No.30140)
from
$21.99
Axle seal for semi-floating Ford and Dodge with R1561TV bearing.Yukon Mighty seal.
Product Features:
See More
Product Features:
- Rear axle seal
- Fits Ford and Dodge applications
- 2.985″ O.D.
- 1.700″ I.D.
National – Multi Purpose Seal (Part No.470682)
from
$26.49
National® has built a reputation as one of the most respected names in the industry. We have offered premium sealing solutions for more than 75 years. Our design team keeps pace with the industry and provides advanced solutions for today’s vehicles.
Product Features:
See More
Product Features:
- Design type: spring loaded; multi-lip
- Temperature range: -40°F to 225°F / -40°C to 107°C
- Good low temperature capability
- Low swell in hydrocarbon fluids
- Delivers quality and reliable performance for every type of repair
Yukon Gear – Drive Flange Cap For Dana 60 (Part No.32132)
Popular 1990 Dodge W350 Drive Shafts and Axles Categories
1990 Dodge W350 Drive Shafts and Axles
Maybe you’re in the middle of a full rebuild of that 1990 Dodge W350. Maybe you just need a couple of Drive Shafts and Axles. Either way, Advance Auto Parts has 33 different Drive Shafts and Axles in our inventory ranging from $3.29 to $1,151.99. That means you can find the exact parts or products you need to keep that 1990 Dodge W350 running smoothly.
Drive Shafts and Axles are only as good as their brand. We stock 12 different brands to make sure you have plenty of trusted parts to choose from for your 1990 Dodge W350. Spicer, Anchor, and National are just some of the brands we stock. Search for brands you know or compare prices and reviews to help you decide!
We know you’ll find the perfect Drive Shafts and Axles for your 1990 Dodge W350, but don’t take our word for it – read our customer ratings and reviews and buy with confidence. Out of the 170 reviews in this category, some of the top rated parts include Center Support Bearing Motor Mount: Center, 1 Piece with 5.0 stars.
So if you’re in the market for aftermarket Drive Shafts and Axles to keep your 1990 Dodge W350 rolling for years to come, look no further. Shop online and have your products shipped direct to your door, or pick up at the nearest Advance Auto Parts location today!
Drive Shafts and Axles Brands To Make Your 1990 Dodge W350 Last
Simple repair, complete replacement, or a full rebuild. No matter the job, your 1990 Dodge W350 demands trusted brand parts and products to keep it running. Many trusted brands of Drive Shafts and Axles make up Advance Auto Parts’ inventory, and all are ready to help make your W350 the best it can be. Be sure to browse some of our top Drive Shafts and Axles brands and parts.
Popular Spicer Drive Shafts and Axles
We carry Spicer parts in our stock across Axle Shaft Universal Joints categories, plus more. For a 1990 Dodge W350, our most popular Spicer Drive Shafts and Axles include:
Top 1990 Dodge W350 Drive Shafts and Axles from National
National products are another trusted brand when it comes to Drive Shafts and Axles for your 1990 Dodge W350. Popular National parts include:
FAQs for 1990 Dodge W350 Drive Shafts and Axles
What are the most purchased Drive Shafts and Axles for the 1990 Dodge W350?
Out of 33 Drive Shafts and Axles for the 1990 Dodge W350, the most popular in our inventory are:
What are the top-rated 1990 Dodge W350 Drive Shafts and Axles?
Top-rated Drive Shafts and Axles for your 1990 Dodge W350 based on customer reviews/ratings are:
