1990 Chevrolet K3500 Steering and Chassis Parts

Below you will find various in-demand Chevrolet Steering and Chassis Parts, components and accessories for your 1990 K3500. Advance Auto Parts has popular K3500 parts like Sway Bars, Gear Boxes, Tie Rods and more. You’ll also find aftermarket and OEM Steering and Chassis Parts for other K3500 model years including 1992, 1993, 1994, 1995, 1996, 1997, 1998, 1999, 2000 and more. Select a category of 1990 Chevrolet K3500 Steering and Chassis Parts below and start saving instantly.

Popular 1990 Chevrolet K3500 Steering and Chassis Parts Categories

Coupler (Rag Joint)

Power Steering Coolers

Steering Gear Box

Suspension Ball Joint Kits

Center Tie Rod Ends

Steering Drag Link Adjusting Sleeves

Power Steering Filters

Lower Control Arm and Ball Joints

Tie Rod Ends

Tie Rod End Sleeves

Center and Drag Links

Caster and Camber Kits

Front Alignment Kits

Suspension Stabilizer Bars

Power Steering Pump Pulleys

Power Steering Pressure Hoses

Power Steering Pump Caps

Power Steering Pump Kits

Tie Rod End Boots

Sway Bar Link Bushing Kits

Power Steering Return Hoses

King Pin Bolts

Torsion Bar Load Kits

Sway Bar Bushings

Pitman Shaft Seal Kits

Steering Gear Input Shaft Seals

Steering Gear Kits

Steering Gear Box Seals

Power Steering Pump Seal Kits

Chassis Wiring Harness Connectors

Steering King Pin Set Caps

Pump Shaft Seals

Alignment Shim Multi-Packs

Steering Gear Housing Bearings

Alignment Caster Wedge Multi-Packs

Essential Steering and Chassis Parts for 1990 Chevrolet K3500s

from

$145.65

Restores steering control KYB Steering Stabilizers are designed to stop vibrations before they reach the driver. By damping steering shimmy and front-end vibrations, KYB Steering Stabilizers provide more tire control and provide critical performance for highway and off-road applications.

Product Features:

Engineered to decrease wheel shimmy for reduced tire wear
Direct OE Replacement
Chrome hardened piston
Polyurethane bushings
wear and steering vibration
Available for domestic and import trucks and SUVs

from

$90.99

CARQUEST premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.

from

$18.49

Premium-quality parts for lasting repairs. Engineered to OE design and specifications.

from

$218.99

By constantly introducing design enhancements that extend product life and simplify installation and replacement, MOOG has earned its reputation as the chassis industry’s Problem Solver.

Product Features:

High quality construction
Saves time on installation
For both professionals and DIYers
Designed for use on cars and light trucks
Incorporates proven design and engineering features

from

$65.99

Premium-quality parts for lasting repairs. Engineered to OE design and specifications.

from

$21.79

This high quality chassis part will improve overall vehicle handling, reduce tire wear and increase the life of other steering and suspension components. These chassis parts are manufactured to meet or exceed OEM.

Product Features:

Complete with clamps
Used to set Toe in or out
replaces rusted or corroded sleeves
Used to connect inner and outer tie rod ends

from

$62.99

Premium-quality parts for lasting repairs. Engineered to OE design and specifications.

from

$182.99

ACDelco Advantage Idler Arms feature a precision-machined arm, housing, and socket end to ensure fit and function. The heavy-duty conical coil spring and cold-formed, heat-treated T-stud deliver the performance, while the hot-forged arm and bracket provide the strength you would expect from ACDelco.

Product Features:

Original Equipment Quality
Precision-machined arm, housing, and socket
Heavy-duty conical coil spring
Heat-treated T-stud

from

$199.99

This suspension stabilizer bar, also called a sway bar, matches the fit and function of the original sway bar on specified vehicles to restore reliable vehicle handling. With a corrosion-resistant finish, it includes installation hardware.

Product Features:

Ideal replacement – this sway bar matches the fit and function of the original part on specified vehicle years, makes and models.
Durable construction – this sway bar is made of quality materials with a corrosion-resistant finish.
Cost-effective solution – offers original equipment quality at competitive price
Quality tested – this part has undergone testing to ensure a quality fit and long service life

from

$178.99

The steering gear box is the heart of the vehicle¿s steering system. It guides the wheels¿ movement in conjunction with the direction that the steering wheel is rotated, helping achieve ideal steering response for more efficient driving. CARDONE Remanufactured Steering Gear Boxes are re-engineered, built and tested to match O.E. performance. E ach unit features 100% new O-rings and lip seals to ensure leak-free, long-lasting performance. Shafts are surfaced to precise specifications to eliminate premature seal wear and extend gear life. All units are 100% hydraulically tested to ensure perfect fit and function.

Product Features:

100% hydraulic testing measures for proper flow, leakage and performance to ensure perfect fit and function.
100% new O-rings and lip seals ensure leak-free, long-lasting performance.
All critical components are tested to ensure product reliability.
Shafts are surfaced to precise specifications to eliminate premature seal wear and extend gear life.
Rust inhibitive “Cool Dip” finish is a penetrating dye that completely covers all exposed surfaces for a consistent, protective finish that will not crack, flake or peel.
As a remanufactured Original Equipment part, this unit guarantees a perfect vehicle fit.
Our remanufacturing process is earth-friendly, as it reduces the energy and raw material needed to make a new part by 80%.

from

$34.49

Easy to install
Returns like-new steering
Long-lasting performance
Construction and design validated by MOOG engineers
Incorporates proven design and engineering features

from

$43.99

Our power steering pressure and return hoses are accurately designed and constructed to match or exceed the original equipment (OE) specifications, guaranteeing a precise and long-lasting installation. With a focus on duplicating the exact routing of the OE hoses, every bend is carefully executed to follow the original hose’s trajectory to ensure a seamless fit into the allotted space. Manufactured with quality materials and incorporating essential safety features, our hoses provide excellent protection against premature failure. Each hose is engineered to withstand the intense pressure pulsations and heat typically encountered in steering systems, offering exceptional resistance to breakdown and system contamination.

from

$84.99

Powdered metal gusher bearing design enables grease to flow through bearing
Engineered steel composition results in a stronger component
Full ball metal stud provides 360 Degrees of smooth, consistent, rotational movement resulting in more responsive steering
Loose or worn chassis parts can lead to premature tire wear
Greaseable socket reduces corrosion and wear by allowing new lubricant to flush contaminants
Greaseable socket reduces corrosion and wear by allowing new lubricant to flush contaminants

from

$71.99

Backed by superior materials and rigorous testing, MOOG® ball joints deliver reliable performance you can count on. MOOG problem-solving innovations ensure fast, hassle-free installation.

Product Features:

PROBLEM SOLVER® GUSHER BEARING — Metal-to-metal design provides strength and allows grease to flow through bearing surface for reduced friction and long life
STRONG AND DURABLE — Ball studs are heat treated to match or exceed OE requirements to inhibit premature failure and improve fatigue strength
GREASEABLE SOCKET — Reduces corrosion and wear by allowing new lubricant to flush contaminants
ABSORBS IMPACT — Belleville preload washer helps keep the bearing package tight as bearings wear
EASY TO INSTALL — Precision tolerances for easy installation and steering alignment giving you a perfect fit right out of the box
COMPREHENSIVE COVERAGE — Available for foreign and domestic nameplates

from

$65.99

Backed by superior materials and rigorous testing, MOOG® outer tie rod ends deliver reliable performance you can count on. MOOG problem-solving innovations ensure fast, hassle-free installation.

Product Features:

RESTORES LIKE-NEW STEERING — Patented pressed-in cover plate seals out debris and minimizes looseness, reducing bearing wear and promoting longer life
GREASEABLE SOCKET — Reduces corrosion and wear by allowing new lubricant to flush contaminants
ABSORBS IMPACT — Belleville preload washer helps keep the bearing package tight as bearings wear
PROBLEM SOLVER® GUSHER BEARING — Metal-to-metal design provides strength and allows grease to flow through bearing surface for reduced friction and long life
STRONG AND DURABLE — Ball studs are heat treated to match or exceed OE requirements to inhibit premature failure and improve fatigue strength
EASY TO INSTALL — Precision tolerances for easy installation and steering alignment giving you a perfect fit right out of the box
COMPREHENSIVE COVERAGE — Available for foreign and domestic nameplates
RIGOROUS TESTING — Comprehensive testing throughout design and development processes by MOOG engineers for quality you can count on

from

$29.99

This power steering pump pulley is designed to match the fit and function of the original pulley on specified applications. Made of quality materials, it is engineered for reliable performance and durability.

Product Features:

Direct replacement – this power steering pump pulley is designed to match the fit and function of the original pulley on specified applications.
Restores functionality – reliable replacement for an original pulley that has failed due to contamination by road debris, or damaged during service.
Durable construction – this part is made from quality materials to ensure reliable performance and long service life
Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience

from

$19.99

National Oil Seals & Bearings offer a full line of premium oil seals and bearings.

Product Features:

Premium bearing design matches OEM specifications
Precision manufactured using premium-grade steel for outstanding durability and performance
Available in both caged design and full complement
Industry leading coverage
Professional technicians know they can depend on National

from

$29.49

Backed by superior materials and rigorous testing, MOOG sway bar bushings deliver reliable performance you can count on. MOOG problem-solving innovations ensure fast, hassle-free installation.

Product Features:

PREMIUM MATERIALS┐–┐Made from high-quality thermoplastic material for durability and ride performance
EXTENDED SERVICE LIFE — Less prone to splitting, discoloring or cracking with age for long life
HIGHLY PRECISE ENGINEERING — Optimized for quiet operation and resistance to wear, salt, road grime and oils
RIGOROUS TESTING — Comprehensive testing throughout design and development processes by MOOG engineers for quality you can count on
COMPREHENSIVE COVERAGE — Available for foreign and domestic nameplates

from

$36.49

3/4″ x 2-1/2″ x 12″ power steering oil cooler medium duty. Imperial power steering coolers provide additional protection to help prolong the life of the system’s pump, hoses and seals.

Product Features:

Medium-duty power steering oil cooler
Size: 3/4″ x 2-1/2″ x 12″
For vehicle with 3/8″ ID power steering return hose
Removes destructive heat and helps prolong power steering system life

from

$85.99

Easy to install
Restores like-new steering and handling
Engineered to meet or exceed OE requirements
Construction and design validated by MOOG engineers
Incorporates proven design and engineering features

from

$37.99

Rubber or Thermoplastic material
No Squeak
Complete with bolt ,washers, and nut
Improves body roll

from

$50.99

Can bring vehicles back to factory specification
Can solve excessive tire wear and steering issues
Shims and bushings provide precise camber, caster and toe adjustments
Incorporates proven design and engineering features
Cam bolts and adjustable ball joints provide alignment for non-adjustable vehicles

from

$238.99

Restores OE alignment
Precision machining tolerances
Heat treated components

from

$36.49

When replaced, Driveworks Brand tie rod ends help to eliminate front-end vibration, shimmy and unsafe handling. Driveworks Brand chassis parts help ensure improved steering response and durability.

Product Features:

Meets or exceeds OE performance specifications
Performance tested to ensure durability
Forged micro-alloy steel construction for strength and durability
A slotted nut and cotter pin for a more secure installation

from

$18.99

National has built a reputation as one of the most respected names in the industry. We have offered premium sealing solutions for more than 75 years. Our design team keeps pace with the industry and provides advanced solutions for today’s vehicles.

Product Features:

Low swell in hydrocarbon fluids
Design type: spring loaded; multi-lip
Provides good low temperature capability
Temperature range: -40°F to 225°F; -40°C to 107°C
Delivers quality and reliable performance for every type of repair

from

$101.99

CARDONE Remanufactured Power Steering Pumps are engineered to meet or exceed O.E. performance. Original designs are scrutinized for potential improvement, and where applicable, design upgrades are implemented to produce a more durable part than the original. All critical components are tested to ensure proper function. Every unit undergoes a hydraulic efficiency test to ensure reliable, long-lasting performance.

Product Features:

All critical components (campacs, spool valves, etc.) are triple-tested to ensure product reliability.
All units are built with 100% new O-rings and premium-grade HNBR seals to prevent leaks. HNBR does not break down at high temperatures like conventional seal material.
Shafts are surfaced to precise specifications to eliminate premature seal wear and extend pump life.
Units are supplied with 100% tested and calibrated pressure relief valves.
FInal pump assembly is computer-tested to measure pressure, bypass, fluid flow, valve operation, steering effort and noise to ensure reliable performance.
As a remanufactured Original Equipment part, this unit guarantees a perfect vehicle fit.
Our remanufacturing process is earth-friendly, as it reduces the energy and raw material needed to make a new part by 80%.

from

$45.49

from

$85.70

ACDelco ball joints are designed for easier steering. ACDelco chooses the best design for the application, often incorporating advanced technology some competitors don’t match.

Product Features:

Superb strength and durability thanks to precision manufactured housing and components
Advanced corrosion protection against the harshest conditions
Permanently attached boot reduces contamination, makes installation easier
Full ball stud and patented two-piece cylindrical wedge bearing for tighter overall fit and fatigue resistance
No spring means no end play, easier installation
One-piece forged housing for easier steering

Upgrade your 1990 Chevrolet K3500 with Top-Quality Steering and Chassis Parts

When it comes to maintaining or upgrading your 1990 Chevrolet K3500, nothing is more important than using high-quality OEM or aftermarket parts that you can trust. Whether you’re repairing damage to your Chevrolet or enhancing its overall performance, Steering and Chassis Parts are key to keeping your K3500 functioning at its best. At Advance Auto Parts, we offer a wide selection of 140 Steering and Chassis Parts for the 1990 Chevrolet K3500, designed to meet your needs without breaking the bank. From Sway Bar replacements to Gear Boxes upgrades, we’ve got you covered with parts that fit your vehicle perfectly and ensure long-lasting performance.

Affordable Prices and Wide Selection

Shopping for Steering and Chassis Parts for any vehicle can be a hassle, especially if you’re on a budget. But with Advance Auto Parts, you can find high-quality Steering and Chassis Parts for your 1990 Chevrolet K3500 at great prices. Our Steering and Chassis Parts inventory for this model ranges from just $2.99 to $972.99, with an average price of $71.49. Our 140 Steering and Chassis Parts in stock come from 23 trusted brands, so you’re sure to find the right part for your 1990 Chevrolet K3500 without overspending.

Top Brands and High Customer Satisfaction

Advance Auto Parts takes pride in offering only the best brands in the automotive industry. For your 1990 Chevrolet K3500, we stock popular OEM and aftermarket Steering and Chassis Parts from top names like Driveworks, Imperial, Moog, and more. Driveworks Steering and Chassis Parts start at just $7.49 and boast an impressive 4 stars average rating from customers. Imperial and Moog also bring quality to the table, with Steering and Chassis Parts available starting at $11.49, and at an average 4 stars rating. With 3,037 customer reviews and counting, our 1990 Chevrolet K3500 Steering and Chassis Parts have a strong track record of reliability, ensuring you can trust your purchase.

Explore Related Parts and More

While you’re here, don’t forget to check out other essential categories that go hand in hand with Steering and Chassis Part upgrades. Explore related part types like Batteries and Chargers, Oil and Lubricants and more to make sure your 1990 Chevrolet K3500 is always ready to roll. We’re committed to providing you with everything you need to keep your K3500 in top shape, all in one place. Start shopping confidently below for your 1990 Chevrolet K3500!

Best-Selling Sway Bars for 1990 Chevrolet K3500s

Enhance the driving experience in your Chevrolet with 20 quality Sway Bar components, starting at $7.49.

show more show less

from

$11.99

PREMIUM MATERIALS┐–┐Made from high-quality thermoplastic material for durability and ride performance
EXTENDED SERVICE LIFE — Less prone to splitting, discoloring or cracking with age for long life
HIGHLY PRECISE ENGINEERING — Optimized for quiet operation and resistance to wear, salt, road grime and oils
RIGOROUS TESTING — Comprehensive testing throughout design and development processes by MOOG engineers for quality you can count on
COMPREHENSIVE COVERAGE — Available for foreign and domestic nameplates

from

$17.29

Driveworks chassis parts help to eliminate front-end vibration, shimmy and unsafe handling. Driveworks chassis parts meet OE specifications, help ensure improved steering response and reduce tire wear.

Product Features:

Gas shielded welding reinforcement ensure the safety of driving under poor road conditions
Wrench flats at the base of the stud allow for the use of sockets for easy installation

from

$31.99

Backed by superior materials and rigorous testing, MOOG sway bar links deliver reliable performance you can count on. MOOG problem-solving innovations ensure fast, hassle-free installation.

Product Features:

EASY TO INSTALL — Innovative features like molded bushings that hold coated washers in place and easy-thread 1-in. barrel lock nut make it easier to install than traditional sway bar links
PREMIUM MATERIALS — Made from premium materials for long-lasting dependability
RIGHT TECHNOLOGY FOR THE REPAIR — Featuring problem-solving innovations for long life, MOOG designs the right sway bar link technology for your vehicle
RIGOROUS TESTING — Comprehensive testing throughout design and development processes by MOOG engineers for quality you can count on
COMPREHENSIVE COVERAGE — Available for foreign and domestic nameplates

from

$18.29

Driveworks Brand sway bar link kits are made to meet OE specifications. They work with the sway bar to reinforce the suspension system, preventing excessive body roll. Driveworks Brand chassis parts help ensure improved steering response and durability.

Product Features:

Meets or exceeds OE performance specifications
Premium Polychloroprene boot with grease relief valve keeps contaminants out
Performance tested to ensure durability

from

$29.49

PREMIUM MATERIALS┐–┐Made from high-quality thermoplastic material for durability and ride performance
EXTENDED SERVICE LIFE — Less prone to splitting, discoloring or cracking with age for long life
HIGHLY PRECISE ENGINEERING — Optimized for quiet operation and resistance to wear, salt, road grime and oils
RIGOROUS TESTING — Comprehensive testing throughout design and development processes by MOOG engineers for quality you can count on
COMPREHENSIVE COVERAGE — Available for foreign and domestic nameplates

from

$27.49

PREMIUM MATERIALS┐–┐Made from high-quality thermoplastic material for durability and ride performance
EXTENDED SERVICE LIFE — Less prone to splitting, discoloring or cracking with age for long life
HIGHLY PRECISE ENGINEERING — Optimized for quiet operation and resistance to wear, salt, road grime and oils
RIGOROUS TESTING — Comprehensive testing throughout design and development processes by MOOG engineers for quality you can count on
COMPREHENSIVE COVERAGE — Available for foreign and domestic nameplates
Inner sleeve is phosphate coated for corrosion protection

from

$7.49

Meets or exceeds OE performance specifications
Premium Polychloroprene boot with grease relief valve keeps contaminants out
Performance tested to ensure durability

from

$29.49

Carquest chassis provides the installation benefits of the aftermarket while providing high-quality, proven reliability. Carquest chassis has been rigorously quality-tested, meeting or exceeding OE specifications. Carquest chassis parts have been designed to provide a stable and safe ride to meet customer expectations and perform the way professional technicians demand.

Product Features:

OE matched design for Form, Fit, and Function
Advanced corrosion-resistant electro-coating to reduce rust
Hex formed studs and/or wrench flats for ease of installation
Hardware included for easier installation (where applicable)
Hardware included for easier installation (where applicable)

from

$21.49

PREMIUM MATERIALS┐–┐Made from high-quality thermoplastic material for durability and ride performance
EXTENDED SERVICE LIFE — Less prone to splitting, discoloring or cracking with age for long life
HIGHLY PRECISE ENGINEERING — Optimized for quiet operation and resistance to wear, salt, road grime and oils
RIGOROUS TESTING — Comprehensive testing throughout design and development processes by MOOG engineers for quality you can count on
COMPREHENSIVE COVERAGE — Available for foreign and domestic nameplates

from

$10.79

Sway Bar Link Bushing Kit

from

$50.99

This suspension stabilizer bar bushing kit is precision-engineered and rigorously tested to provide reliable replacement for the original equipment on specific vehicles.

Product Features:

Direct replacement – fits and performs like the original equipment on specific vehicles.
Reliable fit – precision-engineered to match the design and dimensions of original components.
Durable construction – manufactured to strict standards using sturdy, safe materials
Rigorously tested – thorough quality control measures ensure longevity

from

$11.79

Strut Rod Bushing

from

$41.99

Rubber or Thermoplastic material
No Squeak
Complete with bolt ,washers, and nut
Improves body roll

from

$52.99

Sway Bar Link

from

$29.99

Rubber or Thermoplastic material
No Squeak
Restores vehicle handling
Improves body roll

from

$37.99

Rubber or Thermoplastic material
No Squeak
Complete with bolt ,washers, and nut
Improves body roll

from

$24.99

OE matched design for Form, Fit, and Function
Hardware included for easier installation (where applicable)

from

$17.99

This suspension stabilizer bar bushing kit is precision-engineered and rigorously tested to provide reliable replacement for the original equipment on specific vehicles.

Product Features:

Direct replacement – fits and performs like the original equipment on specific vehicles.
Reliable fit – precision-engineered to match the design and dimensions of original components.
Durable construction – manufactured to strict standards using sturdy, safe materials
Rigorously tested – thorough quality control measures ensure longevity

from

$16.99

This suspension stabilizer bar bushing kit is precision-engineered and rigorously tested to provide reliable replacement for the original equipment on specific vehicles.

Product Features:

Direct replacement – fits and performs like the original equipment on specific vehicles
Reliable fit – precision-engineered to match the design and dimensions of original components
Durable construction – manufactured to strict standards using sturdy, safe materials
Rigorously tested – thorough quality control measures ensure longevity

from

$16.99

This suspension stabilizer bar bushing kit is precision-engineered and rigorously tested to provide reliable replacement for the original equipment on specific vehicles.

Product Features:

Direct replacement – fits and performs like the original equipment on specific vehicles
Reliable fit – precision-engineered to match the design and dimensions of original components
Durable construction – manufactured to strict standards using sturdy, safe materials
Rigorously tested – thorough quality control measures ensure longevity

Most Popular 1990 Chevrolet K3500 Gear Boxes

Customize your Chevrolet with 9 Gear Boxes products like Steering Gear Box, Steering Stabilizers, and Steering Gear Box Seals, all priced under $972.99.

show more show less

from

$49.99

The Monro-Magnum® steering stabilizer stops vibration before it gets to the driver. Acting as a horizontal shock absorber, Monro-Magnum® steering stabilizers help reduce vibrations that travel through the steering system to the driver.

Product Features:

1/2 inch Piston Rod Heavy-duty nitrocarburized rod for long service life
All Weather Fluid Contains special modifiers to reduce friction and ensure smooth rod reaction.
Full Displaced Valving Better valving range on both the compression and extension cycles of the unit for a smooth comfortable ride.
Micro-Cellular Gas Design Allows unit to be mounted horizontally.
Sintered Iron Piston Stronger than traditional metals, enhances durability for longer service life.
Special Seal ‘Self-lubricating’ fluid seal designed to retain gas without excessive wear or friction.

from

$90.99

Ideal for off-road driving, towing and street applications, Rancho® RS5000® steering stabilizers enhance a vehicle’s performance and minimize on- and off-road driver fatigue by reducing wheel shimmy, bump steer and vibration.

Product Features:

IMPROVED HANDLING AND PERFORMANCE — Reduces wheel shimmy, bump steer and vibration which helps minimize on- or off-road driver fatigue
ACCOMMODATES LARGER TIRES — Engineered for vehicles with oversized wheels and tires
ENGINEERED TO LAST — Features protective boot to safeguard shock rod and oil seal
HANDLES EXTREME TEMPERATURE CHANGES — Twin-tube cellular gas design filled with all-weather fluid allows for cooler operation, increased vehicle control and ability to withstand internal temperatures of -40 to 248°F

from

$178.99

100% hydraulic testing measures for proper flow, leakage and performance to ensure perfect fit and function.
100% new O-rings and lip seals ensure leak-free, long-lasting performance.
All critical components are tested to ensure product reliability.
Shafts are surfaced to precise specifications to eliminate premature seal wear and extend gear life.
Rust inhibitive “Cool Dip” finish is a penetrating dye that completely covers all exposed surfaces for a consistent, protective finish that will not crack, flake or peel.
As a remanufactured Original Equipment part, this unit guarantees a perfect vehicle fit.
Our remanufacturing process is earth-friendly, as it reduces the energy and raw material needed to make a new part by 80%.

from

$219.99

Power Steering Gears are thoroughly cleaned and exterior surfaces reconditioned for like-new look. Each component is carefully inspected and replaced if not to OE tolerances. All seals and O-rings are replaced with OE equivalent parts. Each unit is tested to insure OE performance. Painted with a high quality paint. All units are carefully packaged to insure safe arrival at your door. Remanufactured in the USA.

from

$239.33

A1 CARDONE Remanufactured Steering Gears are the component within a car’s steering system that guides the wheel’s movement in conjunction with the direction that the steering wheel is rotated, helping achieve ideal steering response for more efficient driving. The micro-finished surfaces of it’s shafts are precision-designed to provide a smoother drive, while the factory-set Pitman shaft transmits the motion it receives from the gear box by moving the wheels left or right to turn the wheels. OEM grade O-rings and seals are used and meet required specifications, providing you a quality product both you and your vehicle can rely on.

Product Features:

100% computerized hydraulic testing measures for proper flow, leakage and performance to ensure perfect fit and function
100% new O-rings and lip seals ensure no leaking and long-lasting performance
All critical components (campacs, spool valves, etc.) are triple-tested to ensure product reliability
Units are supplied with 100% tested and calibrated pressure relief valves for guaranteed performance
Shafts are surfaced to precise specifications to eliminate premature seal wear and extend gear life
Rust inhibitive “Cool Dip” finish is a penetrating dye that completely covers all exposed surfaces for a consistent, protective finish that will not crack, flake or peel
Guaranteed fit and function
Meets or exceeds O.E.M. performance

from

$129.99

Designed to reduce wheel shimmy and end vibration caused by larger tires, the Rancho® steering stabilizer kit cuts down on steering arm fatigue to improve handling. The kit includes one Rancho RS5000® steering stabilizer and installation brackets.

Product Features:

COMPATIBILITY — Designed for a variety of Chevrolet® and GMC® trucks and SUVs
IMPROVED HANDLING AND PERFORMANCE — Reduces wheel shimmy, bump steer and vibration which helps minimize on- or off-road driver fatigue
ACCOMMODATES LARGER TIRES — Engineered for vehicles with oversized wheels and tires.
ENGINEERED TO LAST — Features protective boot to shield shock rod and oil seal and 0.25-in. high-strength, low-alloy steel bracket construction for long life
EASY TO INSTALL — Includes one Rancho RS5000® steering stabilizer and brackets that bolt directly to factory steering linkage with included mounting hardware, no modifications needed
RESISTS CORROSION — Durable black powder-coated and/or zinc-plated brackets resist rust and corrosion
PRECISION DESIGN — Brackets are CNC cut and bent to exact specifications for a perfect fit

from

$56.99

Premium-quality parts for lasting repairs. Engineered to OE design and specifications.

from

$972.99

Direct Fit – to make installation easy; All units are USA Engineering Approved; PWR Pumps, Racks, Gears & Reservoirs are 100% tested for leaks, pressure, noise and function

Product Features:

PWR Power Steering Gear Boxes are 100% NEW and Engineered In North America
All PWR products are Designed, Tier-Manufactured, and Multi-Tested to meet or exceed OE Performance and Durability Requirements
PWR does not consolidate turn ratios, ensuring OE quality replacement performance
Includes: NEW housings, internal components, ball bearings, shafts, bushings, and are precision machined and matched for optimum performance and duarability
Features our EXCLUSIVE INDUSTRIAL GRADE PACKAGING, Input and Output Shaft Spilne Protectors, Sealed Heavy Duty Plastic Enclosures, and Fluid Port Caps
Supplied with a New Output Shaft Nut and all required Installation Seals and Washers

from

$19.99

National Oil Seals & Bearings offer a full line of premium oil seals and bearings.

Product Features:

Premium bearing design matches OEM specifications
Precision manufactured using premium-grade steel for outstanding durability and performance
Available in both caged design and full complement
Industry leading coverage
Professional technicians know they can depend on National

Top Picks for 1990 Chevrolet K3500 Tie Rods

Upgrade Chevrolet K3500s with top-quality Tie Rods parts, including 21 OEM and aftermarket selections for your 1990 model.

show more show less

from

$28.49

Coated for corrosion resistance
Engineered to meet or exceed OE Performance
Wrench flats on housing and stud provide easy installation and alignment adjustment.
Polished Stud ball provides low socket torque.
Stud design is optimized to provide ideal stud swing and strength for each application.

from

$36.49

Meets or exceeds OE performance specifications
Performance tested to ensure durability
Forged micro-alloy steel construction for strength and durability
A slotted nut and cotter pin for a more secure installation

from

$33.99

Meets or exceeds OE performance specifications
Performance tested to ensure durability
Forged micro-alloy steel construction for strength and durability
A slotted nut and cotter pin for a more secure installation

from

$65.99

RESTORES LIKE-NEW STEERING — Patented pressed-in cover plate seals out debris and minimizes looseness, reducing bearing wear and promoting longer life
GREASEABLE SOCKET — Reduces corrosion and wear by allowing new lubricant to flush contaminants
ABSORBS IMPACT — Belleville preload washer helps keep the bearing package tight as bearings wear
PROBLEM SOLVER® GUSHER BEARING — Metal-to-metal design provides strength and allows grease to flow through bearing surface for reduced friction and long life
STRONG AND DURABLE — Ball studs are heat treated to match or exceed OE requirements to inhibit premature failure and improve fatigue strength
EASY TO INSTALL — Precision tolerances for easy installation and steering alignment giving you a perfect fit right out of the box
COMPREHENSIVE COVERAGE — Available for foreign and domestic nameplates
RIGOROUS TESTING — Comprehensive testing throughout design and development processes by MOOG engineers for quality you can count on

from

$103.99

Backed by superior materials and rigorous testing, MOOG inner tie rod ends deliver reliable performance you can count on. MOOG problem-solving innovations ensure fast, hassle-free installation.

Product Features:

ABSORBS IMPACT — Belleville preload washer helps eliminate spring bind and shattering during shock load
PROBLEM SOLVER® GUSHER BEARING — Metal-to-metal design provides strength and allows grease to flow through bearing surface for reduced friction and long life
STRONG AND DURABLE — Ball studs are heat treated to match or exceed OE requirements to inhibit premature failure and improve fatigue strength
RESTORES LIKE-NEW STEERING — Patented pressed-in cover plate seals out debris and minimizes looseness, reducing bearing wear and promoting longer life
GREASEABLE SOCKET — Reduces corrosion and wear by allowing new lubricant to flush contaminants
EASY TO INSTALL — Wrench flats on housing and stud provide easy installation and alignment adjustment
RIGOROUS TESTING — Comprehensive testing throughout design and development processes by MOOG engineers for quality you can count on
COMPREHENSIVE COVERAGE — Available for foreign and domestic nameplates

from

$21.49

Driveworks Brand tie rod adjusting sleeves are high-quality, cost-effective parts. Replace tie rod adjusting sleeve to help eliminate front-end vibration, shimmy and unsafe handling. Driveworks Brand chassis parts promote improved steering response.

Product Features:

Meets or exceeds OE performance specifications
Performance tested to ensure durability
Forged micro-alloy steel construction for strength and durability

from

$9.99

Repair torn and worn-out boots of suspension tie rod ends – without having to buy the entire and expensive tie rod. Adds durability surpassing most OEM rubber boots. Exclusive 5 point sealing action. Choose from four sizes and round or octagon styles. Made of Energy’s Hyper-Flex performance polyurethane for added performance and durability.

Product Features:

Easy to Install
Superior Material
Saves Your Tie Rods
Lasts Longer
Looks Great

from

$34.99

OE matched design for Form, Fit, and Function
Advanced corrosion-resistant electro-coating to reduce rust
Hex formed studs and/or wrench flats for ease of installation
Hardware included for easier installation (where applicable)
Hardware included for easier installation (where applicable)

from

$60.99

OE matched design for Form, Fit, and Function
Advanced corrosion-resistant electro-coating to reduce rust
Hex formed studs and/or wrench flats for ease of installation
Hardware included for easier installation (where applicable)
Hardware included for easier installation (where applicable)

from

$95.99

Product Features:

OE matched design for Form, Fit, and Function
Advanced corrosion-resistant electro-coating to reduce rust
Polished full ball studs combined with synthetic bearing technology for smooth operation and improved reliability
Hex formed studs &/or wrench flats for ease of installation
Hardware included for easier installation (where applicable)
Thread locking compound included.

from

$5.99

Easy to Install
Superior Material
Saves Your Tie Rods
Lasts Longer
Looks Great

from

$88.02

An ACDelco Professional Steering Tie Rod End is an ideal high-quality aftermarket replacement for many vehicles on the road today. It connects your vehicle’s steering linkage to the steering knuckle. This premium aftermarket replacement component is manufactured to meet your expectations for fit, form, and function.

Product Features:

Superb strength for durability
Consistent torque for smooth operation
Full ball stud
Low-friction double bearing for high impact resistance
Undergo extreme impact, wear, and fatigue testing to ensure quality and durability
Full ball stud for tighter overall fit
Dust boot is re-installed and permanently attached to reduce contamination, increase durability, and service life
Fused polyurethane dust boot resists cracking, splitting, dry rot, and corrosion

from

$5.99

Easy to Install
Superior Material
Saves Your Tie Rods
Lasts Longer
Looks Great

from

$20.94

TRW sets the standard within the Aftermarket, with tests that go beyond the ordinary to ensure every chassis part we produce meets stringent vehicle manufacturer quality standards, in line with the Original Equipment specification. To help make sure that our parts can go the distance, TRW utilizes on the road tests and the most advanced test machines available, in both our Original Equipment and Aftermarket facilities as well as by independent testing labs. So you can be sure that TRW parts are tested for your safety. The TRW Tie Rod End Adjustment Sleeve is a direct fit OEM replacement that contains the same high quality craftsmanship and materials as the original equipment they replace.

Product Features:

OE-Equivalent and a direct fit application.
Meets or exceeds the OE specifications.
Acoustic measurements to ensure driver comfort
Strength tests for durability
Environmental resistance tests for all weather conditions
Wear and drive tests
Assembly technique testing of all critical safety features
Dynamic testing of complete units to ensure leak free performance
Extensive on-road testing at TRW tracks around the world

from

$31.19

Tie Rod End Adjustin

from

$154.99

Restores vehicle handling
Restores OE alignment
Reduces tire wear
Improves steering response

from

$67.79

TRW sets the standard within the Aftermarket, with tests that go beyond the ordinary to ensure every chassis part we produce meets stringent vehicle manufacturer quality standards, in line with the Original Equipment specification. To help make sure that our parts can go the distance, TRW utilizes on the road tests and the most advanced test machines available, in both our Original Equipment and Aftermarket facilities as well as by independent testing labs. So you can be sure that TRW parts are tested for your safety. TRW’s tie rod end joints includes the latest, high performance designs which incorporate the following features:

Product Features:

Long lasting dust covers made from the highest quality rubber that eliminate dust and water from entering the ball joint
Low friction plastic bearings that enhance damping and reliability
Manufactured using forged or cold formed steel
Two-seat design is standard, and eliminates the need for a spring
Top of the ball pins are polished
Salt Spray Test (240hrs)
Dynamic Test and Elasticity Test
Original Equipment quality hardware installation accessories
Acoustic measurements to ensure driver comfort
Strength tests for durability

from

$55.46

ACDelco Advantage Steering Tie Rod Ends are economical replacement components for your GM and non-GM vehicle. They connect your vehicle’s steering linkage to the steering knuckle. These dependable aftermarket steering tie rod ends offer quality and performance, all at an economical price.

Product Features:

Superb strength for durability
Consistent torque for smooth operation
Full ball stud
Low-friction double bearing for high impact resistance
Undergo extreme impact, wear, and fatigue testing to ensure quality and durability

from

$51.05

Superb strength for durability
Consistent torque for smooth operation
Full ball stud
Low-friction double bearing for high impact resistance
Undergo extreme impact, wear, and fatigue testing to ensure quality and durability

from

$39.49

Restores vehicle handling
Restores OE alignment
Reduces tire wear
Improves steering response

from

$18.29

Ties rods and ball joints are important components in the overall suspension equation, yet they are supplied with inferior rubber boots that deteriorate and tear over time. Replacing them with Daystar Dust Boots will increase the durability and longevity of these important suspension components. Unless otherwise stated, they are offered in universal applications so have the stud and overall joint diameters on hand.

Product Features:

Durable Polyurethane Material
Keeps Out Dust
Made In USA
Easy To Install

In-Demand Ball Joints for 1990 Chevrolet K3500s

Select from 17 premium Ball Joints parts for your 1990 Chevrolet K3500, with prices ranging from $14.62 to $164.99.

show more show less

from

$64.99

PROBLEM SOLVER® GUSHER BEARING — Metal-to-metal design provides strength and allows grease to flow through bearing surface for reduced friction and long life
STRONG AND DURABLE — Ball studs are heat treated to match or exceed OE requirements to inhibit premature failure and improve fatigue strength
GREASEABLE SOCKET — Reduces corrosion and wear by allowing new lubricant to flush contaminants
ABSORBS IMPACT — Belleville preload washer helps keep the bearing package tight as bearings wear
RESTORES LIKE-NEW STEERING — Patented pressed-in cover plate seals out debris and minimizes looseness, reducing bearing wear and promoting longer life
EASY TO INSTALL — Precision tolerances for easy installation and steering alignment giving you a perfect fit right out of the box
COMPREHENSIVE COVERAGE — Available for foreign and domestic nameplates

from

$71.99

PROBLEM SOLVER® GUSHER BEARING — Metal-to-metal design provides strength and allows grease to flow through bearing surface for reduced friction and long life
STRONG AND DURABLE — Ball studs are heat treated to match or exceed OE requirements to inhibit premature failure and improve fatigue strength
GREASEABLE SOCKET — Reduces corrosion and wear by allowing new lubricant to flush contaminants
ABSORBS IMPACT — Belleville preload washer helps keep the bearing package tight as bearings wear
EASY TO INSTALL — Precision tolerances for easy installation and steering alignment giving you a perfect fit right out of the box
COMPREHENSIVE COVERAGE — Available for foreign and domestic nameplates

from

$40.49

Driveworks Brand ball joints are made to meet OE specifications. They play a critical role in the safe operation of the vehicle by eliminating unstable front-end suspension. Driveworks Brand chassis parts ensure improved steering response and durability.

Product Features:

Meets or exceeds OE performance specifications
Premium Polychloroprene boot provides extended temperature range and better wear resistance
Test-proven stud material helps prevent premature stud failure
Provides premium gauge steel construction for strength and durability
Performance tested to ensure durability

from

$95.01

Long lasting dust covers made from the highest quality rubber that eliminate dust and water from entering the ball joint
Low friction plastic bearings that enhance damping and reliability
Manufactured using forged or cold formed steel
Two-seat design is standard, and eliminates the need for a spring
Top of the ball pins are polished
Salt Spray Test (240hrs)
Dynamic Test and Elasticity Test
Original Equipment quality hardware installation accessories
Acoustic measurements to ensure driver comfort
Strength tests for durability

from

$40.99

Meets or exceeds OE performance specifications
Premium Polychloroprene boot provides extended temperature range and better wear resistance
Test-proven stud material helps prevent premature stud failure
Provides premium gauge steel construction for strength and durability
Performance tested to ensure durability

from

$164.99

MOOG premium control arms for foreign and domestic nameplates are engineered for structural strength and corrosion protection.

Product Features:

EASY TO INSTALL — Precision tolerances for easy installation and steering alignment giving you a perfect fit right out of the box
HIGHLY PRECISE ENGINEERING — Optimized bushings for quiet operation and resistance to wear, salt, road grime and oils
COMPREHENSIVE COVERAGE — Available for foreign and domestic nameplates
LONG LIFE — Ball stud shape ensures fatigue life, compensating for sag and suspension and adding extra swing when you need it
ENHANCED STRUCTURAL STRENGTH — Heat treated to match or exceed OE requirements to inhibit premature failure
ADDED CORROSION PROTECTION — Coated studs and e-coated cast iron and steel control arms inhibit premature deterioration

from

$164.99

MOOG premium control arms for foreign and domestic nameplates are engineered for structural strength and corrosion protection.

Product Features:

EASY TO INSTALL — Precision tolerances for easy installation and steering alignment giving you a perfect fit right out of the box
HIGHLY PRECISE ENGINEERING — Optimized bushings for quiet operation and resistance to wear, salt, road grime and oils
COMPREHENSIVE COVERAGE — Available for foreign and domestic nameplates
LONG LIFE — Ball stud shape ensures fatigue life, compensating for sag and suspension and adding extra swing when you need it
ENHANCED STRUCTURAL STRENGTH — Heat treated to match or exceed OE requirements to inhibit premature failure
ADDED CORROSION PROTECTION — Coated studs and e-coated cast iron and steel control arms inhibit premature deterioration

from

$96.95

ACDelco Advantage Suspension Ball Joints connect your vehicle’s control arm to its steering knuckle, allowing your wheels to turn and the suspension to move. They serve as the pivot between the wheels and suspension, as well as a support for your vehicle’s weight. These replacement components contain a forged CNC-machined shell, synthetic bearings, and full-ball studs, for high-quality performance and durability. ACDelco Advantage Chassis products provide high-quality parts at a tremendous value. Engineered to the fit, form, and function of a premium aftermarket line, ACDelco Advantage Chassis include tie rod ends, ball joints, control arms, steering and suspension links, steering arms, and bushings – all at an economical price. With ACDelco Advantage parts, installation hardware is included where needed.

Product Features:

Undergo impact, wear, and fatigue testing to help ensure quality and durability
Heat-treated for enhanced quality and endurance
Greasable design where applicable, for easy maintenance and longevity
Dust boot is re-installed and permanently attached to reduce contamination, and increase durability and service life
Forged, CNC-machined shell leads to high-quality, precision-made performance and additional strength
Full-ball type studs are manufactured using a cold-formed process to reduce imperfections and hold the tightest of tolerances

from

$85.70

Superb strength and durability thanks to precision manufactured housing and components
Advanced corrosion protection against the harshest conditions
Permanently attached boot reduces contamination, makes installation easier
Full ball stud and patented two-piece cylindrical wedge bearing for tighter overall fit and fatigue resistance
No spring means no end play, easier installation
One-piece forged housing for easier steering

from

$83.43

Superb strength and durability thanks to precision manufactured housing and components
Advanced corrosion protection against the harshest conditions
Permanently attached boot reduces contamination, makes installation easier
Full ball stud and patented two-piece cylindrical wedge bearing for tighter overall fit and fatigue resistance
No spring means no end play, easier installation
One-piece forged housing for easier steering

from

$119.99

This suspension control arm and ball joint assembly is a direct replacement for the original equipment on specific vehicle applications. An industry-leading evaluation process ensures a smooth ride, directional stability and predictable dynamics.

Product Features:

Trustworthy replacement – this control arm and ball joint assembly directly replaces the original assembly on specific vehicle applications.
Complete repair – each assembly includes pre-installed ball joint and bushings, saving time and labor.
Quality engineering – underwent industry-leading testing to ensure a smooth, stable and safe ride
Durably designed – additional coatings offer long-lasting rust and corrosion resistance

from

$119.99

Trustworthy replacement – this control arm and ball joint assembly directly replaces the original assembly on specific vehicle applications.
Complete repair – each assembly includes pre-installed ball joint and bushings, saving time and labor.
Quality engineering – underwent industry-leading testing to ensure a smooth, stable and safe ride
Durably designed – additional coatings offer long-lasting rust and corrosion resistance

from

$60.87

Undergo impact, wear, and fatigue testing to help ensure quality and durability
Heat-treated for enhanced quality and endurance
Greasable design where applicable, for easy maintenance and longevity
Dust boot is re-installed and permanently attached to reduce contamination, and increase durability and service life
Forged, CNC-machined shell leads to high-quality, precision-made performance and additional strength
Full-ball type studs are manufactured using a cold-formed process to reduce imperfections and hold the tightest of tolerances

from

$50.23

The ISG Ball Joint is an ideal high quality aftermarket replacement that is manufactured to meet or exceed OE specifications for fit, form, and function.

Product Features:

OE expertise and quality
Precision manufactured housing and components
Corrosion protection
Permanently attached boot
One-piece forged housing for easier steering

from

$49.49

Heat treated components
Dust seal to prevent contamination
Restores vehicle handling
Restores OE alignment

from

$32.49

Heat treated components
Dust seal to prevent contamination
Restores vehicle handling
Restores OE alignment

from

$14.62

Every FEQ ball joint is engineered to restore the handling of your vehicle to original equipment condition. With global manufacturing facilities being ISO 9001, ISO TS/16949 and ISO 14001 Certified, the processes and quality are maintained to the highest standards providing superior products.

Product Features:

OE expertise and quality
Precision manufactured housing and components
Corrosion protection
Permanently attached boot
One-piece forged housing for easier steering
Ball joint kits include new pinch bolt, nut and other necessary parts for attachment

Most Sold 1990 Chevrolet K3500 Power Steering Parts

Explore our best-selling Chevrolet parts for the 1990 K3500 among 41 OEM and aftermarket options starting from $2.99.

show more show less

from

$35.49

from

$13.29

Premium-quality parts for lasting repairs. Engineered to OE design and specifications.

from

$48.49

CARDONE Steering Filters are uniquely designed to protect the steering system from damaging contaminates, which impacts performance and leads to premature power steering pump failure. These compact filters are easy to install, provide magnetic filtration, can be serviced in-line and are highly recommended to extend the life of your steering system. Available in 3/8″, 1/2″, and 5/8″ sizes to cover a most vehicle applications.

Product Features:

In-line filter with serviceable filter element
Patented built-in bypass that filters up to 190 micron particles
Designed to extend the life of the steering system
Sure-grip barb connections are included to ensure proper hose fitment

from

$46.99

In-line filter with serviceable filter element
Patented built-in bypass that filters up to 190 micron particles
Designed to extend the life of the steering system
Sure-grip barb connections are included to ensure proper hose fitment

from

$45.49

from

$96.99

All critical components (campacs, spool valves, etc.) are triple-tested to ensure product reliability.
All units are built with 100% new O-rings and premium-grade HNBR seals to prevent leaks. HNBR does not break down at high temperatures like conventional seal material.
Shafts are surfaced to precise specifications to eliminate premature seal wear and extend pump life.
Units are supplied with 100% tested and calibrated pressure relief valves.
FInal pump assembly is computer-tested to measure pressure, bypass, fluid flow, valve operation, steering effort and noise to ensure reliable performance.
As a remanufactured Original Equipment part, this unit guarantees a perfect vehicle fit.
Our remanufacturing process is earth-friendly, as it reduces the energy and raw material needed to make a new part by 80%.

from

$11.49

Product Features:

Imperial mounting kit system
For installation of transmission coolers and electric fans
Provides quick, effective installation of Imperial products
Contains nylon mounting rods, foam pads and locking buttons
Atermarket electric fan and cooler mounting rods
Made with the highest quality materials
Quality machined for durability
Removable buttons for relocation

from

$29.99

Direct replacement – this power steering pump pulley is designed to match the fit and function of the original pulley on specified applications.
Restores functionality – reliable replacement for an original pulley that has failed due to contamination by road debris, or damaged during service.
Durable construction – this part is made from quality materials to ensure reliable performance and long service life
Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience

from

$23.99

from

$36.99

Premium-quality parts for lasting repairs. Engineered to OE design and specifications.

from

$38.99

from

$32.49

Our products are engineered and tested to provide years of trouble free operation. Backed by over 50 years of mobile a/c experience, fix it once and fix it right with Imperial.

Product Features:

Transmission oil cooler hose
11/32″ x 4-1/2′
Designed for transmission fluid applications
Made for tight-radius applications found in transmission cooler installations
Compatible with 11/32 in. OEM cooler systems
Tube made of black chemigum (nitrile)
Reinforced with 2-spiral synthetic
Covered in black Hypalon
Compatible with 11/32 in. OEM cooler systems
Tube made of black chemigum (nitrile)
Reinforced with 2-spiral synthetic
Covered in black Hypalon

from

$31.99

In-line filter with serviceable filter element.
Patented built-in bypass that filters up to 190 micron particles.
Designed to extend the life of the steering system.
Sure-grip barb connections are included to ensure proper hose fitment.

from

$62.99

Premium-quality parts for lasting repairs. Engineered to OE design and specifications.

from

$5.99

This power steering reservoir cap is a direct replacement for a cracked, worn or missing original equipment cap to prevent fluid leaks and steering system contamination.

Product Features:

Ideal replacement – this power steering reservoir cap matches the fit, function and appearance of a damaged or missing original equipment cap.
Durable construction – made of quality materials for leak-free performance and a long service life
Cost-effective solution – offers original equipment quality at competitive price
Quality tested – this part has undergone try-on and material testing to ensure a quality fit and reliable performance

from

$43.49

from

$28.49

Product Features:

Power steering oil cooler
3/4″ x 2-1/2″ x 9″
For vehicles with 3/8″ I.D. power steering return hose
Removes destructive heat and prolongs power steering system life
Compatible with OEM cooler systems
Ultrasonically soldered for reliability
100% pressure testing to 150 PSI for quality assurance
High efficiency turbulators

from

$11.49

Imperial transmission line fitting kits allow for the installation of auxiliary cooler lines without cutting the vehicle’s original metal lines.

Product Features:

Quick Connect coupler
Fits most 5/16″ transmission lines with 1/2″ – 20″ threads
Simplifies transmission cooler installation
Allows for auxiliary transmission cooler installation without cutting OE lines

from

$75.99

All critical components (campacs, spool valves, etc.) are triple-tested to ensure product reliability.
All units are built with 100% new O-rings and premium-grade HNBR seals to prevent leaks. HNBR does not break down at high temperatures like conventional seal material.
Shafts are surfaced to precise specifications to eliminate premature seal wear and extend pump life.
Units are supplied with 100% tested and calibrated pressure relief valves.
FInal pump assembly is computer-tested to measure pressure, bypass, fluid flow, valve operation, steering effort and noise to ensure reliable performance.
As a remanufactured Original Equipment part, this unit guarantees a perfect vehicle fit.
Our remanufacturing process is earth-friendly, as it reduces the energy and raw material needed to make a new part by 80%.

from

$20.79

Provides all necessary components for the proper reinstallation of an Imperial transmission oil cooler.

Product Features:

Transmission cooler reinstallation kit
Contains part numbers 248001, 226201, 240250 and 4 hose clamps
Provides all hardware for reinstallation of Imperial transmission coolers
Contains nylon mounting rods, foam pads, locking buttons, hose and fitting

from

$2.99

from

$31.99

In-line filter with serviceable filter element
Patented built-in bypass that filters up to 190 micron particles
Designed to extend the life of the steering system
Sure-grip barb connections are included to ensure proper hose fitment

from

$36.49

Medium-duty power steering oil cooler
Size: 3/4″ x 2-1/2″ x 12″
For vehicle with 3/8″ ID power steering return hose
Removes destructive heat and helps prolong power steering system life

from

$145.99

This power steering cooler is designed to match the fit and function of the original cooler on specified vehicles. Made of quality materials, it is engineered for reliable performance and durability.

Product Features:

Direct replacement – this power steering cooler is designed to match the fit and function of the original cooler on specified vehicles.
Ideal solution – this power steering cooler is a reliable replacement for a failed original cooler.
Durable construction – made from quality, corrosion-resistant components to ensure reliable performance and long service life
Trustworthy quality – backed by a team of product engineers based in the United States

from

$31.99

from

$31.49

Product Features:

Interchangeable end sizes allow the filter to fit virtually any hose size and vehicle
Small size provides an easy fit, even in cramped systems
Dual filtration technology eliminates metal and non-metal debris, ensuring a cleaner system
Filter can be easily serviced, extending its functional lifespan considerably

from

$30.99

from

$88.99

All critical components (campacs, spool valves, etc.) are triple-tested to ensure product reliability.
All units are built with 100% new O-rings and premium-grade HNBR seals to prevent leaks. HNBR does not break down at high temperatures like conventional seal material.
Shafts are surfaced to precise specifications to eliminate premature seal wear and extend pump life.
Units are supplied with 100% tested and calibrated pressure relief valves.
FInal pump assembly is computer-tested to measure pressure, bypass, fluid flow, valve operation, steering effort and noise to ensure reliable performance.
As a remanufactured Original Equipment part, this unit guarantees a perfect vehicle fit.
Our remanufacturing process is earth-friendly, as it reduces the energy and raw material needed to make a new part by 80%.

from

$137.99

Power Steering Pumps are thoroughly cleaned and exterior surfaces reconditioned for like-new look. Each component is carefully inspected and replaced if not to OE tolerances. All seals and O-rings are replaced with OE equivalent parts. Each unit is tested to insure OE performance. Painted with a high quality paint. All units are carefully packaged to insure safe arrival at your door. Remanufactured in the USA.

from

$275.34

P/S Cooler

from

$201.99

Building on decades of experience using reverse engineering to remanufacture power steering products, CARDONE engineers have meticulously designed and tested our CARDONE New Power Steering Pumps to fit and perform like the original. Each unit is supplied with premium high-temperature seals for reliability you can count on.

Product Features:

Rigorous computer load testing ensures optimal performance and durability by incorporating real-world parameters during the test cycle.
Manufactured with premium grade, high-temperature seals for added durability under all driving conditions.
Precise bushing alignment prevents premature shaft and seal wear, significantly reducing noise and vibration.
Meets or exceeds O.E. performance.

from

$181.99

NEW P/S PUMP

from

$137.99

from

$136.99

from

$111.99

from

$71.99

All critical components (campacs, spool valves, etc.) are triple-tested to ensure product reliability.
All units are built with 100% new O-rings and premium-grade HNBR seals to prevent leaks. HNBR does not break down at high temperatures like conventional seal material.
Shafts are surfaced to precise specifications to eliminate premature seal wear and extend pump life.
Units are supplied with 100% tested and calibrated pressure relief valves.
FInal pump assembly is computer-tested to measure pressure, bypass, fluid flow, valve operation, steering effort and noise to ensure reliable performance.
As a remanufactured Original Equipment part, this unit guarantees a perfect vehicle fit.
Our remanufacturing process is earth-friendly, as it reduces the energy and raw material needed to make a new part by 80%.

Elite Pressure Hose; 16mm Male "O" Ring x 18mm Male "O" Ring

from

$33.49

Built to withstand a variety of weather conditions and extreme temperatures, our power steering pressure hoses are designed to last through daily wear and tear while delivering smooth and quiet performance, every time. Each hose in the Edelmann Elite line has a durable zinc coating that actively protects against and helps to prevent rust and corrosion damage, and each hose also features innovative heat/abrasion tubing that is specifically designed to hold up to a range of temperatures – from the freezing cold to extreme heat waves. Each hose features double lock beading with a barbed tube end that provides superior hose/coupling integrity. Every Edelmann Elite hose is equipped with the identical OEM fitting as the hose being replaced. This ensures a good seal when installed properly. All bends are made to the exact specification of the OEM hose. This ensures that the hose will fit in the space provided and takes the course of the original OEM hose. Plews & Edelmann is a leading designer, manufacturer and distributor of a broad range of automotive parts, accessories, gadgets, and tools sold to the vast majority of mass merchant, retail auto parts stores and wholesale automotive parts and industrial distribution outlets worldwide.

Product Features:

Superior temperature range performance ensures function at any temperature.
Outstanding impulse durability increases longevity of the hose.
Constructed to OEM form, fit, and function to ensure ease of installation and ongoing performance.

from

$28.99

All Steering Power Filter

from

$28.99

All Steering Power Filter

from

$28.99

POWER STEERINGFILTER

from

$6.99

POWER STEERINGFILTER

Top-Rated Steering and Chassis Parts Brands For Your 1990 Chevrolet K3500

Shop for the best-rated brands offering Steering and Chassis Parts and other products for your 1990 Chevrolet K3500s. Below you’ll find some of our best rated Steering and Chassis Parts from Driveworks, Imperial, and Moog, and more. Steering and Chassis Parts from these brands that fit a 1990 K3500 start at just $7.49 and are rated as high as 4 stars. OEM and aftermarket Steering and Chassis Parts don’t get more top quality, durable, and affordable than from the brands below.

Popular Driveworks 1990 Chevrolet K3500 Steering and Chassis Parts

When it comes to maintaining or upgrading your 1990 Chevrolet K3500, using quality Steering and Chassis Parts is essential to ensure durability and a perfect fit. Driveworks ticks all of those boxes. We offer a wide selection of Driveworks Steering and Chassis Parts, specifically designed for the 1990 Chevrolet K3500. With over 12 Driveworks brand Steering and Chassis Parts in stock, you’re sure to find what you need. The prices for these top-notch parts start as low as $7.49, with an average price of just $28.51. Plus, with over 304 customer reviews and an average rating of 4 stars, you can trust that our Driveworks Steering and Chassis Parts will get the job done right. Choose Advance Auto Parts for reliability, quality, and expert-approved parts that keep your vehicle running strong.

from
$11.79

This product is not rated

Strut Rod Bushing

“”

from
$17.29

(120)

Suspension Sway Bar Link Kit

“Very durable works great the rubber is not blue it’s plain black”

from
$10.79

This product is not rated

Sway Bar Link Bushing Kit

“”

Popular Imperial 1990 Chevrolet K3500 Steering and Chassis Parts

Imperial auto parts is one of the highest quality Steering and Chassis Part brands in the market. Any 1990 Chevrolet K3500 owner should feel confident when installing genuine Imperial parts in their vehicle. To ensure the best fit and performance for your 1990 K3500, Advance Auto Parts carries a full inventory of 6 Imperial Steering and Chassis Parts. Plus you will be keeping your Chevrolet in peak condition while saving money because prices on these Imperial Steering and Chassis Parts range from $11.49 to $36.49, plus, with more than 211 customer reviews and an impressive 4 stars average rating, you can be confident the Fram Steering and Chassis Parts below will deliver on both quality and value.

from
$11.49

(27)

Mounting Kit System

“Perfect for my transmission cooler holds it very good in place”

from
$36.49

This product is not rated

Power Steering Oil Cooler Medium Duty

“”

from
$32.49

(94)

Transmission Oil Cooler Hose

“its a hose what cam I say”

FAQs for 1990 Chevrolet K3500 Steering and Chassis Parts

Which Steering and Chassis Parts are best-sellers for 1990 Chevrolet K3500s?

Out of 140 Steering and Chassis Parts that fit 1990 Chevrolet K3500s, the following parts are the top sellers:

Transmission Oil Cooler Hose (5670022) – $32.49
Mounting Kit System (6014844) – $11.49
Stabilizer Bar Link Kit (10575128) – $31.99

What’s the price range for 1990 Chevrolet K3500 Steering and Chassis Parts?

Steering and Chassis Part prices for the 1990 Chevrolet K3500 start at $2.99 and go up to $972.99 for the most premium parts.

What’s the average price of a Steering and Chassis Part for a 1990 Chevrolet K3500?

The average price for Steering and Chassis Parts for the 1990 Chevrolet K3500 is $71.49. Keep in mind the variety of part types within our Steering and Chassis Part category so you are likely to find a wide range of prices across a variety of parts and components.

Does Advance Auto Parts sell Steering and Chassis Parts for other Chevrolet K3500 model years?

Yes, we currently carry Steering and Chassis Parts for 12 model years of Chevrolet K3500s between 1988 and 2000. Steering and Chassis Parts are bought most frequently for the following model years: 2000, 1999, 1998, 1997, 1996, 1995, 1994, 1993, and 1992.

What are the cheapest Steering and Chassis Parts for my 1990 Chevrolet K3500?

The cheapest 1990 Chevrolet K3500 Steering and Chassis Parts we carry in stock are:

3/8" ID Return Hose (sold by each) (18070570) – $2.99
Power Steering Caps (6090435) – $5.99
Tie Rod Dust Boot (22906873) – $5.99
Tie Rod Dust Boot (22906874) – $5.99
POWER STEERINGFILTER (50167394) – $6.99

What are the top-rated Steering and Chassis Parts that fit the 1990 Chevrolet K3500?

Out of 3,037 reviews by customers, our 1990 Chevrolet K3500 Steering and Chassis Parts have an average customer rating of . These are some of the highest-rated Steering and Chassis Part types for the 1990 Chevrolet K3500 and their top-rated products:

Sway Bars
- Stabilizer Bar Bushing Kit (20973488) – $11.99
- Suspension Sway Bar Link Kit (15510351) – $17.29
- Sway Bar Link Kit (10194308) – $18.29
Tie Rods
- Stabilizer Bar Bushing Kit (20973488) – $11.99
- Suspension Sway Bar Link Kit (15510351) – $17.29
- Sway Bar Link Kit (10194308) – $18.29

What types of Steering and Chassis Parts do you sell for my 1990 Chevrolet K3500?

As of 2/5/25, these are some of the most in-demand types of Steering and Chassis Parts for a 1990 Chevrolet K3500:

Can I get help with 1990 Chevrolet K3500 Steering and Chassis Part orders?

Contact our customer support team, by chat or phone, through the help desk page, where you can find instant answers about Chevrolet Steering and Chassis Parts and more.

What is your return policy for Chevrolet K3500 Steering and Chassis Parts?

Advance Auto Parts keeps returns simple. For new Chevrolet K3500 Steering and Chassis Parts and accessories, your online orders can be returned, in their original condition, within 45 days. For requirements, see the returns page.

1990 Chevrolet K3500 Steering and Chassis Parts

KYB – Steering Damper Kit (Part No.M4002151299KYB)

Carquest Premium – Chassis Wiring Harness Connector (Part No.PTA2913)

Powercraft – Steering Gear Input Shaft Seal Kit (Part No.9234)

MOOG – Torsion Bar Load Kit (Part No.T40016)

Powercraft – Steering Gear Major Seal Kit (Part No.8775)

Rare Parts – Tie Rod Sleeve (Part No.RP25522)

Powercraft – Pump Complete Rebuild Kit (Part No.7910)

ACDelco – Professional Idler Arm (Part No.M3020591741ACD)

Dorman – Suspension Stabilizer Bar (Part No.927-101)

Cardone – Remanufactured Steering Gear (Part No.27-7539)

MOOG – Alignment – Adjustment Kit (Part No.K100274)

Carquest Premium – Power Steering Return Hose Assembly, 16mm Male "O" Ring x 3/8" I.D. Hose (Part No.39885)

MOOG – Center Link (Part No.DS1408)

MOOG – Ball Joint (Part No.K6291)

MOOG – Tie Rod End (Part No.ES2836RL)

Dorman – Power Steering Pump Pulley (Part No.300-200)

National – Bearings (Part No.DB-53313)

MOOG – Stabilizer Bar Bushing Kit (Part No.K6455)

Imperial – Power Steering Oil Cooler Medium Duty (Part No.241010)

MOOG – Steering Damper Cylinder (Part No.SSD56)

Rare Parts – Sway Bar Link Kit (Part No.RP22201)

MOOG – Caster/Camber Adjusting Kit (Part No.K6302)

Rare Parts – King Pin Reb Kit (Part No.RP30635)

Driveworks – Steering Tie Rod End (Part No.DW-ES2836RL)

National – Multi Purpose Seal (Part No.7013S)

Cardone – Remanufactured Power Steering Pump (Part No.20-1027)

Carquest Premium – Power Steering Pressure Hose Assembly, 16mm Male "O" Ring x 18mm Male "O" Ring (Part No.36595)

ACDelco – Professional Ball Joint (Part No.L2020577167ACD)

MOOG – Stabilizer Bar Bushing Kit (Part No.K5288)

Driveworks – Suspension Sway Bar Link Kit (Part No.DW-K8265)

MOOG – Stabilizer Bar Link Kit (Part No.K700539)

Driveworks – Sway Bar Link Kit (Part No.DW-K80631)

MOOG – Stabilizer Bar Bushing Kit (Part No.K6455)

MOOG – Stabilizer Bar Bushing Kit (Part No.K6453)

Driveworks – Stabilizer Bar Link (Part No.DW-K700539)

Carquest Premium – Stabilizer Bar Link (Part No.520-258838)

MOOG – Stabilizer Bar Bushing Kit (Part No.K5248)

Driveworks – Sway Bar Link Bushing Kit (Part No.DW-K6455B)

Dorman – Sway Bar Bushing Bracket Kit Front (Part No.928-310)

Driveworks – Strut Rod Bushing (Part No.DW-K5248B)

Rare Parts – Sway Bar Link Kit (Part No.RP16304)

Rare Parts – Sway Bar Link (Part No.RP23041)

Rare Parts – Sway Bar Bushing (Part No.RP15882)

Rare Parts – Sway Bar Link Kit (Part No.RP22201)

Carquest Premium – Stabilizer Bar Link (Part No.500-65169)

Dorman – Suspension Stabilizer Bar Bushing Kit (Part No.533-505)

Dorman – Suspension Stabilizer Bar Bushing Kit (Part No.533-467)

Dorman – Suspension Stabilizer Bar Bushing Kit (Part No.533-468)

Monroe – Magnum Steering Damper (Part No.SC2914)

Rancho – RS5000 Steering Damper (Part No.RS5401)

Cardone – Remanufactured Steering Gear (Part No.27-7539)

Lares – Remanufactured Power Steering Gear Box (Part No.1416)

Cardone – Power Steering Gear – Remanufactured (Part No.M1053900230CAR)

Rancho – Single Steering Damper Kit (Part No.RS97265)

Powercraft – Steering Gear Major Seal Kit (Part No.8625)

PWR – New Power Steering Gear (Part No.61-5025)

National – Bearings (Part No.DB-53313)

MOOG – Tie Rod End Adjusting Sleeve (Part No.ES2004S)

Driveworks – Steering Tie Rod End (Part No.DW-ES2836RL)

Driveworks – Steering Tie Rod End (Part No.DW-ES2838RL)

MOOG – Tie Rod End (Part No.ES2836RL)

MOOG – Tie Rod End (Part No.ES2838RL)

Driveworks – Steering Tie Rod End Adjusting Sleeve (Part No.DW-ES2004S)

Energy Suspension – Tie Rod Dust Boot (Part No.9.13101G)

Carquest Premium – Tie Rod End Adjusting Sleeve (Part No.370-65029)

Carquest Premium – Tie Rod End (Part No.310-65083)

Carquest Premium – TIE ROD END (Part No.300-65142)

Energy Suspension – Tie Rod Dust Boot (Part No.9.13102R)

ACDelco – Professional Steering Tie Rod End (Part No.M3010577443ACD)

Energy Suspension – Tie Rod Dust Boot (Part No.9.13102G)

TRW – Tie Rod End Adjustment Sleeve (Part No.M3012363541TRW)

ACDelco – Tie Rod End Adjustin (Part No.M3012577485ACD)

Rare Parts – Tie Rod End (Part No.RP26932)

TRW – TRW Tie Rod End (Part No.M3010211624TRW)

ACDelco – Advantage Steering Tie Rod End (Part No.M3010577467ACD)

ACDelco – Advantage Steering Tie Rod End (Part No.M3010577469ACD)

Rare Parts – Tie Rod End (Part No.RP26930)

Daystar – Top 19/32" Outside Dia/Bottom 1-3/8" Outside Dia, Black, Polyurethane, Set Of 2 (Part No.KU13001BK)

MOOG – Ball Joint (Part No.K6344)