1990 Cadillac Seville Fuel and Emissions Systems
More 1990 Cadillac Seville Fuel and Emissions Systems Categories
If you’re looking for an original Fuel and Emissions Systems replacement for a 1990 Cadillac Seville, you can search through our selection below. You’ll also find aftermarket and OEM Fuel and Emissions Systems to meet your needs.
Essential 1990 Cadillac Seville Fuel and Emissions Systems
Carquest – Fuel Injector (Part No.57046)
from
$80.05
High-quality products that meet OE appearance and performance to provide professional technicians and DIYers with a cost-effective solution.
Product Features:
See More
Product Features:
- Designed to OE standards for ease of installation
- Precision-wound and precision-trimmed solenoid windings allow the computer to command efficient delivery of fuel
- High-temp Viton® O-rings enable prolonged sealing of injector under extreme heat conditions
- Fiber-optic yttrium aluminum garnet “YAG” laser welding and 100 million cycle testing ensure quality in every box
Carquest Premium – Exhaust Gas Recirculation (EGR) Valve Control Solenoid (Part No.CPA1249)
from
$88.99
CARQUEST premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.
See More
Walker Products – Idle Control Valve (Part No.C4030207746WKR)
from
$96.27
Idle Control Valve
Felpro – Fuel Injection Throttle Body Mounting Gasket (Part No.60841)
from
$7.99
Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust
Product Features:
See More
Product Features:
- Meets or exceeds all original equipment specifications
- Application specific design to ensure a perfect fit
- Engineered and manufactured specifically for the repair environment
- Unsurpassed quality you can trust
- Validated for fit, form, and function
Carquest Premium – Secondary Air Injection Pump Check Valve (Part No.CVC1001)
from
$39.99
CARQUEST premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.
See More
Carquest Premium – Deck Lid / Liftgate Ajar Switch Connector (Part No.PTA1077)
from
$29.49
CARQUEST premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.
Product Features:
See More
Product Features:
- Premium quality materials for longer service life
- Sealed connections (where applicable) to prevent environmental corrosion and performance issues
- Global coverage for import and/or domestic applications
- OE specified wire gauge to ensure a reliable electrical connection
- Designed to meet or exceed OE specifications in form, fit and function
Dorman – Clip Nut – Wide Panel-No. 8 X 3/8 In, Panel Range .025 In – .125 In (Part No.45406)
from
$1.99
Dorman offers a comprehensive line of Clip / Spring Nuts for a range of automotive applications. They are available for use with a large variety of screw sizes, throat depths, and panel ranges.
Product Features:
See More
Product Features:
- Constructed of high-quality materials for long-lasting durability
- Many different styles are available, including threaded and wide panel
- Packaged in a variety of piece counts for use with both small and large projects
- Also suitable for a broad range of industrial and commercial uses
Carquest – Exhaust Gas Recirculation (EGR) Valve (Part No.41C1001)
from
$79.99
CARQUEST premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.
See More
ACDelco – GM Original Equipment Fuel Pump Tank Seal (Part No.E3004295048ACD)
from
$40.69
The ACDelco GM Original Equipment Fuel Pump Tank Seal is a GM-recommended replacement component that provides the same performance, durability, and service life as your factory original equipment.
Product Features:
See More
Product Features:
- GM-recommended replacement part for your GM vehicle’s original factory component
- Offering the quality, reliability, and durability of GM OE
- Manufactured to GM OE specification for fit, form, and function
Carquest Premium – ABS Wheel Speed Sensor Connector (Part No.PTA1749)
from
$25.99
CARQUEST premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.
Product Features:
See More
Product Features:
- Premium quality materials for longer service life
- Sealed connections (where applicable) to prevent environmental corrosion and performance issues
- Global coverage for import and/or domestic applications
- OE specified wire gauge to ensure a reliable electrical connection
- Designed to meet or exceed OE specifications in form, fit and function
Bosch – Fuel Pump Strainer (Part No.68006)
from
$11.99
This Bosch fuel strainer is manufactured to greater-than-OE specification for enhanced durability.
Product Features:
See More
Product Features:
- Recommended repair accessories designed to OEM standards to improve the function of the vehicle and uphold product warranty
- Multilayered filter media with 99% efficiency
- Robust aluminum-, plastic-, or surface-treated steel filter housing designed to withstand high pressure thus offering a longer fuel filter service life
- High micron rating comparable to OE
- Always recommend replacing fuel strainer when replacing a fuel pump to ensure long and reliable service life
Dorman – GM Panel Retainer (Part No.963-021D)
from
$4.49
Constructed of quality materials, this multi-purpose retainer provides the same function and versatility as the original equipment retainer ensuring long service life.
Product Features:
See More
Product Features:
- Ideal replacement – this retainer matches the fit and function of the original equipment retainer for this vehicle application
- Quality material – this retainer is made of durable material for long-lasting service
- Versatile design – this retainer is suitable for a variety of automotive uses
- Excellent value – this part offers original equipment quality at a competitive cost
Bosch – Oxygen Sensor: 1 Wire, 14.57" Long, Non-heated, Exact Fit (Part No.12014)
from
$31.99
Bosch is the world’s leading supplier and original equipment manufacturer of Oxygen Sensors. Bosch invented the automotive oxygen sensor and leads the way in sensor technology and innovation advancements. From overall sensor design to the critical ceramic element, Bosch is known worldwide for quality and performance. Bosch oxygen sensors deliver exceptional OE level reliability, performance and durability, further improving service life of the product.
Product Features:
See More
Product Features:
- Premium Bosch oxygen sensors are designed to improve fuel economy while reducing harmful emissions
- Direct Fit includes OE Connector for easy installation
- Performance meets or exceeds OE specifications
- True Direct-fit OE connectors and harness
Carquest – Air Charge Temperature Sensor (Part No.31A1016)
from
$18.99
WVE is a leading source of advanced vehicle electronics components for replacement applications in the automotive aftermarket and original equipment applications. WVE offers high-technology manufacturing along with innovative solutions and improvements to
See More
ACDelco – 4-Way Male Black Multi-Purpose Pigtail (Part No.PT996)
from
$64.99
ACDelco GM Original Equipment Pigtail Connectors are connectors ready to be spliced into vehicle harnesses, and are GM-recommended replacements for your vehicle’s original components. These original equipment pigtail connectors have been manufactured to fit your GM vehicle, providing the same performance, durability, and service life you expect from General Motors.
Product Features:
See More
Product Features:
- Protective outer coverings help provide long-lasting durability
- Color-coded wires allow for easy installation
- GM-recommended replacement part for your GM vehicle’s original factory component
- Offering the quality, reliability, and durability of GM OE
- Manufactured to GM OE specification for fit, form, and function
ACDelco – Professional Fuel Injection Pressure Regulator (Part No.C3000575668ACD)
from
$94.90
The ACDelco Professional, premium aftermarket Fuel Injection Pressure Regulator is the ideal high quality replacement for your GM vehicle. It is a mechanical valve that controls the fuel pressure in the fuel injector rail. The spring-loaded valve returns excess fuel back to the fuel tank. This premium aftermarket replacement fuel injection pressure regulator is manufactured to meet or exceed your expectations for fit, form, and function.
Product Features:
See More
Product Features:
- Professional, premium aftermarket replacement
- Provides the performance and dependability you expect from ACDelco
- Manufactured to meet expectations for fit, form, and function
DENSO – First Time Fit Oxygen Sensor (Part No.C5010118192ND)
from
$54.98
Denso First Time Fit oxygen sensors are constructed of the highest quality materials available. High-quality stainless steel, porous polytetrafluoroethylene (PTFE), fluorine rubber, aluminum oxide, high-grade platinum and ceramics are used in each DENSO sensor.
Product Features:
See More
Product Features:
- SUPERIOR DESIGN – Maximizes engine performance and fuel efficiency while reducing harmful emissions.
- DOUBLE-PROTECTION COVER – Maintains proper unit temperature for quicker response times and protects the ceramic element against silicone and lead poisoning.
- ALUMINUM-OXIDE TRAP LAYER – Keeps silicone and lead outside the ceramic element through DENSO’s exclusive design, preventing damage to the platinum electrode.
- STAINLESS STEEL HOUSING – Resists corrosion and contamination with a rugged, watertight body.
ACDelco – Fuel Injection Pressure Regulator Kit with Clip (Part No.217-3083)
from
$66.99
ACDelco GM Original Equipment Fuel Injection Pressure Regulators are mechanical valves that control fuel pressure in the fuel injector rail, and are GM-recommended replacements for your vehicle’s original components. Their spring-loaded valves return excess fuel back to the fuel tank. These original equipment fuel injection pressure regulators have been manufactured to fit your GM vehicle, providing the same performance, durability, and service life you expect from General Motors.
Product Features:
See More
Product Features:
- Helps provide constant fuel pressure to the injectors
- Assists in cold engine starts
- Helps maintain stable engine idle
- GM-recommended replacement part for your GM vehicle’s original factory component
- Offering the quality, reliability, and durability of GM OE
- Manufactured to GM OE specification for fit, form, and function
Delphi – Fuel Pump Module Assembly: With Float Arm, Seal, Splice Kit (Part No.FG0347)
from
$346.99
100 years of OE experience, supplier to the world’s top automakers, OE Heritage and knowledge built into every aftermarket part, comprehensive portfolio for a wide range of vehicles and model years.
Product Features:
See More
Product Features:
- Delphi is a global OE manufacturer and all fuel pumps are built to Delphi’s OE standards
- Empty float height and float retention matches OE specifications and guarantees correct gas gauge reading
- Lower amperage draws less load on vehicle’s electrical system
- Part is validated, tested and matched to the right vehicle application
- Always be sure to check and clean fuel tank to avoid unnecessary returns
- Lower failure rates due to its innovative design and durability
Carquest Premium – Manifold Absolute Pressure Sensor (MAP) (Part No.ECE1535)
from
$52.99
CARQUEST MAP sensors are manufactured with critical OEM components to ensure that your engine runs efficiently to reach the best gas mileage on your vehicle.
Product Features:
See More
Product Features:
- CARQUEST MAP sensors connectors are exact OE fit to ensure the proper vacuum is maintained to prevent power loss and to minimize internal contamination.
- CARQUEST MAP sensors utilize high temperature resistant seals. Damaged seals can directly impact the vehicles fuel-to-air ratio, making it less fuel efficient.
- CARQUEST MAP sensors are 100% individually tested for all product functionalities including proper vacuum seal and electrical output.
ACDelco – GM Original Equipment Fuel Injector O-Ring Kit (Part No.C1013414748ACD)
from
$32.69
The ACDelco GM Original Equipment Fuel Injector O-Ring Kit is a GM-recommended replacement component that provides the same performance, durability, and service life as your factory original equipment.
Product Features:
See More
Product Features:
- GM-recommended replacement part for your GM vehicle’s original factory component
- Offering the quality, reliability, and durability of GM OE
- Manufactured to GM OE specification for fit, form, and function
Delphi – Fuel Tank Cleaning Kit (Part No.FC01)
from
$12.49
To perform a complete fuel pump replacement, clean the tank every time. Order the Delphi Fuel Tank Cleaning Kit (Part FC01). Remember, the original pump went into a clean fuel tank, to ensure the same level of performance, the new pump should too. 100 ye
Product Features:
See More
Product Features:
- Helps avoid premature fuel pump failure
- Lint free towel included
- Low suds formulation
- Removes harmful contaminants from the fuel tank
Spectra Premium – Fuel Filler Neck (Part No.FN804)
from
$221.99
Innovative engineering, manufacturing technology and quality control ensure that Spectra Premium fuel tank filler necks meet or exceed the performance of the original equipment they replace.
Product Features:
See More
Product Features:
- Unit is designed to OE fit, form and function requirements accomplished by leveraging our OE fuel system design expertise
- Unit is dual coated for enhanced corrosion protection
- Fit tested on the very same vehicle application for which it was developed verifying first-hand that the design fits properly and can be easily installed
- Unit is leak tested after production to ensure product in free from fuel and / or evaporative leaks
- Tested with OE fuel cap to prevent evaporative emission and check engine light failure
Driveworks – MAP Sensor (Part No.31424)
from
$67.05
Driveworks® offers a line of aftermarket parts and accessories that are commercially acceptable and competitively priced, which provides professional technicians and DIYers with an affordable alternative for repairs.
Product Features:
See More
Product Features:
- Direct-fit OE replacement ensures ease of installation
- Designed to meet OE performance
- As the leader in commercially acceptable parts, we provide professional technicians with the quality parts they need
- As the leader in commercially acceptable parts, we provide professional technicians with the quality parts they need
Carquest Premium – Alternator Connector (Part No.PTA1159)
from
$13.49
CARQUEST premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.
Product Features:
See More
Product Features:
- Premium quality materials for longer service life
- Sealed connections (where applicable) to prevent environmental corrosion and performance issues
- Global coverage for import and/or domestic applications
- OE specified wire gauge to ensure a reliable electrical connection
- Designed to meet or exceed OE specifications in form, fit and function
GM Genuine Parts – Multi-Purpose Fuel Line O-Ring (Part No.19258137)
from
$3.99
GM Genuine Parts Multi Purpose Seals are designed, engineered, and tested to rigorous standards, and are backed by General Motors. GM Genuine Parts are the true OE parts installed during the production of or validated by General Motors for GM vehicles. Some GM Genuine Parts may have formerly appeared as ACDelco GM Original Equipment (OE).
Product Features:
See More
Product Features:
- Some GM Genuine Parts may have formerly appeared as ACDelco GM Original Equipment (OE)
- GM Genuine Parts are designed, engineered and tested to rigorous standards, and are backed by General Motors
- GM Engineers design and validate OE parts specifically for your Chevrolet, Buick, GMC, or Cadillac vehicle
- GM regularly updates production and service part designs to integrate new materials and technologies
Carquest Premium – Fuel Tank Lock Ring (Part No.LR3000)
from
$9.99
CARQUEST lock rings are designed to positively seat the fuel pump in proper position inside the tank. These precision stamped rings are made from corrosion-resistant and durable metals for long life.
Product Features:
See More
Product Features:
- Precision stamped for perfect fit and pump position
- Always replace lock ring as a part of fuel pump service
Carquest Premium – Fuel Cap Tester Adapter (Part No.12410)
from
$15.99
Fuel Cap Tester Adaper for use with Stant fuel cap testers. Color coded for easy identification. Made of durable plastic.
Product Features:
See More
Product Features:
- BAR Certified adapters
- Adapter check’s a fuel cap’s ability to hold pressure.
- Adapters meet EPA standards for recommended fleet coverage.
- Check adapter application chart for specific makes and models
Popular 1990 Cadillac Seville Fuel and Emissions Systems Categories
1990 Cadillac Seville Fuel and Emissions Systems
You count on your 1990 Cadillac Seville to run right. That means taking care of it with regular maintenance, necessary repairs, and the right parts. Advance Auto Parts can help with all of that thanks to our extensive inventory of trusted Fuel and Emissions Systems. With 77 Fuel and Emissions Systems ranging in price from $1.49 to $387.99, you’re sure to find everything you need for your 1990 Cadillac Seville.
Brands matter. If you want to shop a specific Fuel and Emissions Systems brand, we stock 17 different brands like Carquest Premium, Delphi, and GM Genuine Parts. 1990 Cadillac Seville Fuel and Emissions Systems start as low as $1.49!
One of the best ways to find top quality OEM or aftermarket Fuel and Emissions Systems is by asking professionals. Short of that, you can shop with confidence thanks to our 1,126 extensive product reviews on 1990 Cadillac Seville Fuel and Emissions Systems. Some of the top-rated Fuel and Emissions Systems products we carry are Oxygen Sensor: 2 Wire, 12.48" Long, Non-heated, Exact Fit with 4.6 stars and Locking Fuel Cap with 4.3 stars.
Did we mention you can order your Fuel and Emissions Systems from our online catalog and have them shipped right to your garage? Or, if you feel like seeing the parts first-hand, search for your nearest Advance Auto Parts location above and pick up in-store when you’re ready. Browse our full Fuel and Emissions Systems inventory for your 1990 Cadillac Seville below to get started!
Top-Rated Fuel and Emissions Systems Brands For Your 1990 Cadillac Seville
Trusted Fuel and Emissions Systems OEM and aftermarket product brands are what Advance Auto Parts specializes in. The brands we work with are sure to keep that 1990 Cadillac Seville running right for years to come. In our inventory you’ll find brands like Carquest Premium, Delphi, GM Genuine Parts, and even more.
Popular Spectra Premium Fuel and Emissions Systems
You’ll find popular Spectra Premium brand products across Fuel Tanks. All are waiting to get your 1990 Cadillac Seville back on the road. Some of the top-rated Spectra Premium products in these categories are:
Top-Rated Carquest Premium Fuel and Emissions Systems
If Carquest Premium are what you’re looking for, our inventory holds plenty. We stock Carquest Premium brand Fuel and Emissions Systems for your 1990 Cadillac Seville, and some of our most reviewed Carquest Premium parts include:
from
$21.79
(50)
Locking Fuel Cap: 10504, Screw On, Direct Fit, Provides Tight Seal, 1 Pack
Gas Caps
FAQs for 1990 Cadillac Seville Fuel and Emissions Systems
What are the most purchased Fuel and Emissions Systems for the 1990 Cadillac Seville?
Out of 77 Fuel and Emissions Systems for the 1990 Cadillac Seville, the most popular in our inventory are:
What are the top-rated 1990 Cadillac Seville Fuel and Emissions Systems?
Top-rated Fuel and Emissions Systems for your 1990 Cadillac Seville based on customer reviews/ratings are:
from
$23.99
(35)
Locking Fuel Cap
“Had a check engine light and when I scanned it, calls for a new gas cap. Instead of buying oem from the dealer or just an ordinary gas cap from a part”
from
$24.99
(32)
Locking Fuel Cap: 10501, Screw On, Direct Fit, Provides Tight Seal, 1 Pack
“Lost old gas cap and replaced with this one, which comes with a lock (which you don’t have to use,FYI)”
