1989 Porsche 911 Steering and Chassis Parts
More 1989 Porsche 911 Steering and Chassis Parts Categories
If you’re looking for an original Steering and Chassis Parts replacement for a 1989 Porsche 911, you can search through our selection below. You’ll also find aftermarket and OEM Steering and Chassis Parts to meet your needs.
Essential 1989 Porsche 911 Steering and Chassis Parts
APA/URO Parts – Torsion Bar Mount (Part No.L2083655790APA)
from
$60.10
Torsion Bar Mount
Original Equipment – Tie Rod Washer (Part No.M3011412048OEA)
from
$6.89
Tie Rod Washer
Dansk – Sway Bar Bushing (Part No.L1050650713DSK)
from
$11.10
The Dansk Sway Bar Bushing is manufactured using only the highest quality materials and is designed to reduce road noise and vibration.
Product Features:
See More
Product Features:
- OE-Equivalent and direct fit application
- Reduces squeaks, rattles, and vibration noise
- Resistant to oil and other contaminants
- Meets or exceeds OEM specifications
Cardone – Power Steering Filter (Part No.20-0038F)
from
$31.99
CARDONE Steering Filters are uniquely designed to protect the steering system from damaging contaminates, which impacts performance and leads to premature power steering pump failure. These compact filters are easy to install, provide magnetic filtration, can be serviced in-line and are highly recommended to extend the life of your steering system. Available in 3/8″, 1/2″, and 5/8″ sizes to cover a most vehicle applications.
Product Features:
See More
Product Features:
- In-line filter with serviceable filter element
- Patented built-in bypass that filters up to 190 micron particles
- Designed to extend the life of the steering system
- Sure-grip barb connections are included to ensure proper hose fitment
Original Equipment – Washer Hose Clamp (Part No.P7142159044OEA)
from
$4.89
Washer Hose Clamp
Original Equipment – Sway Bar Bracket (Part No.L104033811OEA)
from
$106.72
The Original Equipment Sway Bar Bracket is manufactured using only the highest quality OE materials and is designed to meet OE specifications. The Original Equipment Sway Bar Bracket is the ORIGINAL part, supplied in a plain box, with the car manufacturer’s logo on the part.
Product Features:
See More
Product Features:
- OE-Equivalent and direct fit application
- Meets OE specifications
Driveworks – Steering Tie Rod End (Part No.DW-ES2096R)
from
$15.29
When replaced, Driveworks tie rod ends help to eliminate front-end vibration, shimmy and unsafe handling. Driveworks chassis parts ensure improved steering response and durability.
See More
Rare Parts – Tie Rod End (Part No.RP26536)
from
$32.49
This high quality chassis part will improve overall vehicle handling, reduce tire wear and increase the life of other steering and suspension components. These chassis parts are manufactured to meet or exceed OEM.
Product Features:
See More
Product Features:
- Restores vehicle handling
- Restores OE alignment
- Reduces tire wear
- Improves steering response
Original Equipment – Steering Rack Bushin (Part No.M10632241765OEA)
from
$68.82
Steering Rack Bushin
Powercraft – Pump Seal Kit (Part No.8841)
from
$51.99
Premium-quality parts for lasting repairs. Engineered to OE design and specifications.
See More
Driveworks – Taper Bearing Set (Part No.S-A-2)
from
$8.99
Value-priced bearing meets all cataloged application requirements.
Product Features:
See More
Product Features:
- Brand may vary by location
Sebro – Ball Joint (Part No.L20201155814SEB)
from
$272.08
Every Sebro ball joint is engineered to restore the handling of your vehicle to original equipment condition.
Product Features:
See More
Product Features:
- OE expertise and quality
- Precision manufactured housing and components
- Corrosion protection
- Permanently attached boot
- One-piece forged housing for easier steering
- Ball joint kits include new pinch bolt, nut and other necessary parts for attachment
Rare Parts – Stabilizer Link (Part No.RP22214)
from
$58.99
This high quality chassis part will improve overall vehicle handling, reduce tire wear and increase the life of other steering and suspension components. These chassis parts are manufactured to meet or exceed OEM.
Product Features:
See More
Product Features:
- Rubber or Thermoplastic material
- No Squeak
- Restores vehicle handling
- Improves body roll
Sebro – Ball Joint Nut / Was (Part No.L2036653398SEB)
from
$28.00
Ball Joint Nut / Was
Original Equipment – Ball Joint Pin (Part No.L2028654712OEA)
from
$30.02
Every Original Equipment ball joint pin maintains the OE quality and is to be replaced every time the ball joint is removed or replaced. The OE ball joint pin is the ORIGINAL part, supplied in a plain box, with the car manufacturer’s logo on the part.
Product Features:
See More
Product Features:
- For use with ball joint 911.341.049.01
- OE expertise and quality
- Precision manufactured
- Corrosion protection
APA/URO Parts – Ball Joint Shim (Part No.L2019947540APA)
from
$8.29
Ball Joint Shim
APA/URO Parts – P/S Reservoir Line H (Part No.M2033267589APA)
from
$12.39
P/S Reservoir Line H
National – Bearings (Part No.A-2)
from
$15.99
National Oil Seals & Bearings offer a full line of premium oil seals and bearings.
Product Features:
See More
Product Features:
- Premium bearing design matches OEM specifications
- Precision manufactured using premium-grade steel for outstanding durability and performance
- Crowned raceways and rollers to ensure even load distribution for maximum life
- Industry leading coverage
- Professional technicians know they can depend on National
Bosch – P/S Reservoir (Part No.M2030324461BOS)
from
$51.58
P/S Reservoir
Beck/Arnley – Steering Rack Boot Kit (Part No.103-2734)
from
$31.99
Beck/Arnley parts meet foreign nameplate OE specifications for form, fit and function. Our product specialists work with a network of global sourcing partners so you can install the right part with confidence.
Product Features:
See More
Product Features:
- Matches OE form, fit and function
- One piece neoprene boot (this is not a split boot)
- Includes boot and two clamps for complete installation.
- Quality construction for durability
- Application specific for this vehicle
Rein – Power Steering Rack Boot Kit (Part No.BKK0199)
from
$13.49
Boot kits protect a joint in the car that would be destroyed by dirt, sand and other particles if left exposed, even under normal conditions so it’s important that they be properly maintained and in good condition. Rein automotive application specific power steering boot kits come complete with everything needed to do a proper installation, including all the hardware needed for a guaranteed fit the first time.
Product Features:
See More
Product Features:
- Rein boot kits come with all the needed hardware and components for the complete repair.
- All components are manufactured to strict engineering standards/specifications in materials and tolerances
- Rein also offers a full line of individual boots.
- Matches original equipment design specifications
Original Equipment – Original Equipment Steering Rack Boot (Part No.M101054989OEA)
from
$10.38
The Original Equipment Steering Rack Boot is a high quality original replacement that is manufactured to meet or exceed OE specifications for fit, form, and function. The Original Equipment Steering Rack Boot is the ORIGINAL part, supplied in a plain box, with the car manufacturer’s logo on the part.
Product Features:
See More
Product Features:
- Premium aftermarket replacement
- Manufactured to meet or exceed OE specifications
Original Equipment – Original Equipment Steering Rack Boot (Part No.M101032668OEA)
from
$23.70
The Original Equipment Steering Rack Boot is a high quality original replacement that is manufactured to meet or exceed OE specifications for fit, form, and function. The Original Equipment Steering Rack Boot is the ORIGINAL part, supplied in a plain box, with the car manufacturer’s logo on the part.
Product Features:
See More
Product Features:
- Premium aftermarket replacement
- Manufactured to meet or exceed OE specifications
Driveworks – Taper Bearing Cone (Part No.S-M-88048)
from
$11.29
Value-priced bearing meets all cataloged application requirements.
Product Features:
See More
Product Features:
- Brand may vary by location
National – Bearings (Part No.LM67010)
from
$5.79
National Oil Seals & Bearings offer a full line of premium oil seals and bearings.
Product Features:
See More
Product Features:
- Premium bearing design matches OEM specifications
- Precision manufactured using premium-grade steel for outstanding durability and performance
- Crowned raceways and rollers to ensure even load distribution for maximum life
- Industry leading coverage
- Professional technicians know they can depend on National
National – Bearings (Part No.HM89410)
from
$11.49
National Oil Seals & Bearings offer a full line of premium oil seals and bearings.
Product Features:
See More
Product Features:
- Premium bearing design matches OEM specifications
- Precision manufactured using premium-grade steel for outstanding durability and performance
- Crowned raceways and rollers to ensure even load distribution for maximum life
- Industry leading coverage
- Professional technicians know they can depend on National
Driveworks – Taper Bearing Set (Part No.S-A-5)
from
$10.29
Value-priced bearing meets all cataloged application requirements.
Product Features:
See More
Product Features:
- Brand may vary by location
Driveworks – Tapered Roller Bearing (Part No.S-HM-89410)
Popular 1989 Porsche 911 Steering and Chassis Parts Categories
1989 Porsche 911 Steering and Chassis Parts
You count on your 1989 Porsche 911 to run right. That means taking care of it with regular maintenance, necessary repairs, and the right parts. Advance Auto Parts can help with all of that thanks to our extensive inventory of trusted Steering and Chassis Parts. With 38 Steering and Chassis Parts ranging in price from $4.89 to $131.18, you’re sure to find everything you need for your 1989 Porsche 911.
Brands matter. If you want to shop a specific Steering and Chassis Parts brand, we stock 13 different brands like Driveworks, Cardone, and National. 1989 Porsche 911 Steering and Chassis Parts start as low as $4.89!
One of the best ways to find top quality OEM or aftermarket Steering and Chassis Parts is by asking professionals. Short of that, you can shop with confidence thanks to our 503 extensive product reviews on 1989 Porsche 911 Steering and Chassis Parts.
Did we mention you can order your Steering and Chassis Parts from our online catalog and have them shipped right to your garage? Or, if you feel like seeing the parts first-hand, search for your nearest Advance Auto Parts location above and pick up in-store when you’re ready. Browse our full Steering and Chassis Parts inventory for your 1989 Porsche 911 below to get started!
Top-Rated Steering and Chassis Parts Brands For Your 1989 Porsche 911
Trusted Steering and Chassis Parts OEM and aftermarket product brands are what Advance Auto Parts specializes in. The brands we work with are sure to keep that 1989 Porsche 911 running right for years to come. In our inventory you’ll find brands like Driveworks, Cardone, National, and even more.
Popular Driveworks Steering and Chassis Parts
You’ll find popular Driveworks brand products across Steering Shafts. All are waiting to get your 1989 Porsche 911 back on the road. Some of the top-rated Driveworks products in these categories are:
Top-Rated Cardone Steering and Chassis Parts
If Cardone are what you’re looking for, our inventory holds plenty. We stock Cardone brand Steering and Chassis Parts for your 1989 Porsche 911, and some of our most reviewed Cardone parts include:
FAQs for 1989 Porsche 911 Steering and Chassis Parts
What are the most purchased Steering and Chassis Parts for the 1989 Porsche 911?
Out of 38 Steering and Chassis Parts for the 1989 Porsche 911, the most popular in our inventory are:
