1989 Isuzu Trooper Drivetrains
More 1989 Isuzu Trooper Drivetrains Categories
If you’re looking for an original Drivetrains replacement for a 1989 Isuzu Trooper, you can search through our selection below. You’ll also find aftermarket and OEM Drivetrains to meet your needs.
Essential 1989 Isuzu Trooper Drivetrains
Yukon Gear – Pinion Install Kit For Isuzu (With Drum Brakes) Differential (Part No.13081)
from
$314.99
Yukon Pinion installation kits are a terrific solution for gear installation on lower mileage vehicles where the carrier bearings & races can be reused. This kit uses Timken bearings and races along with a high quality pinion seal and small parts. Included in this kit are the pinion bearings and races, pilot bearing (if applicable), crush sleeve (if applicable), complete pinion shim kit, pinion nut, thread locker, and marking compound with brush. Yukon does extensive research for each application to make sure your kit will arrive with all the correct parts you need to install your pinion gear.
Product Features:
See More
Product Features:
- Fits Isuzu Trooper dropout rear
- Drum brakes only
- Included are pinion bearings and races, pinion seal, crush sleeve, complete pinion shim kit, and marking compound with brush.
Yukon Gear – Pinion Depth Shim Kit For Toyota8", GM 7.5", 8.2" & 12 Bolt Truck (Part No.55064)
from
$39.99
8″ Toyota, 7.5″ GM, 8.2″ GM, 12T, pinion shim set, & Mazda truck.
Product Features:
See More
Product Features:
- Pinion depth shim kit for Toyota 7.5″, 8″ and V6
Yukon Gear – Early Trooper Crush Sleeve (Part No.33124)
from
$23.99
Early Trooper Crush Sleeve.
Product Features:
See More
Product Features:
- Crush sleeve
- Fits Isuzu Trooper dropout
Driveworks – Tapered Roller Bearing (Part No.S-30306)
National – Multi Purpose Seal (Part No.710248)
from
$41.99
National has built a reputation as one of the most respected names in the industry. We have offered premium sealing solutions for more than 75 years. Our design team keeps pace with the industry and provides advanced solutions for today’s vehicles.
Product Features:
See More
Product Features:
- Low swell in hydrocarbon fluids
- Design type: spring loaded; multi-lip
- Provides good low temperature capability
- Temperature range: -40°F to 225°F; -40°C to 107°C
- Delivers quality and reliable performance for every type of repair
Yukon Gear – The Carrier Bearing Puller (Part No.56034)
from
$689.99
The Yukon carrier bearing Puller works with an impact gun to quickly and safely remove carrier bearings without damaging them. This unit comes with a handy bench top stand and works with up to most standard one ton applications. This unit is works with differentials up to one-ton applcations. It is not compatible with Dana 70HD, Dana 80, 10.25″ & 10.5″ Ford, or GM & Chrysler 11.5″ differentials.
Product Features:
See More
Product Features:
- Carrier bearing puller
- Works with an impact gun to safely and easliy remove carrrier bearings
- Not compatible with Dana 70HD, Dana 80, Ford 10.25″ and 10.5″ or Gm and Chrysler 11.5″ applications
MOOG Driveline Products – Greaseable Premium Universal Joint (Part No.383)
from
$37.99
Backed by superior materials and rigorous testing, MOOG Premium universal joints deliver reliable performance you can count on. MOOG problem-solving innovations ensure fast, hassle-free installation.
Product Features:
See More
Product Features:
- COMPREHENSIVE COVERAGE — Available for foreign and domestic nameplates
- GREASABLE DESIGN — Greasable u-joints allow for new grease to flush out contaminants and moisture
- KEEPS DIRT OUT — Nitrile rubber grease seals use a compressed double lip design for effective protection against contaminants
- RIGOROUS TESTING — Comprehensive testing throughout design and development processes by MOOG engineers for quality you can count on
- STRONG AND DURABLE — Bearing cups are cold-forged, case-hardened and precision ground while steel cross is forged and carburized heat treated for strength and durability
- Cross forging shape and flash provide easier installation and high strength
Valvoline – High Performance Transmission & Differential Gear Oil: Conventional 85W-140, 1 Quart (Part No.VV825)
from
$12.49
Valvoline High Performance Synthetic Gear Oil is the thermally stabile extreme pressure lubricant that offers outstanding protection for gearboxes and differentials in passenger cars, light trucks, and sport utility vehicles. Combined with high quality synthetic base oils, our formula’s superior additives help reliably safeguard against severe temperatures, shock loads, foaming, scuffing, scouring, corrosion and pitting in high load, high torque and high horsepower conditions. Can be used in conventional and limited slip hypoid differentials where GL-5 is specified as well as non-synchronized manual transmissions that require GL-4. Protect your gears with Valvoline, the #1 gear oil brand.
Product Features:
See More
Product Features:
- HIGH PERFORMANCE EXTREME-PRESSURE ADDITIVES HELP MINIMIZE WEAR in high pressure and high temperature conditions
- EXCEPTIONAL HIGH AND LOW TEMPERATURE PROTECTION can easily handle both winter and summer conditions for dependable coverage and protection year-round
- REDUCES CHATTERING AND PROTECTS GEAR TEETH from oxidation, rust, and wear
- FIGHTS CORROSION AND RUST with emulsifying agents and safeguards against impurities, oxidation and thermal breakdown
- SUPERIOR ADDITIVES help reliably safeguard against severe temperatures, shock loads, foaming, scuffing, scouring, corrosion and pitting in high load, high torque and high horsepower conditions
National – Bearings (Part No.106-FL)
from
$17.99
National Oil Seals & Bearings offer a full line of premium oil seals and bearings.
Product Features:
See More
Product Features:
- Premium bearing design matches OEM specifications
- Precision manufactured using premium-grade steel for outstanding durability and performance
- Controlled heat treating process for lasting performance and extended bearing life
- Industry leading coverage
- Professional technicians know they can depend on National
National – Bearings (Part No.208-LO)
from
$49.49
National Oil Seals & Bearings offer a full line of premium oil seals and bearings.
Product Features:
See More
Product Features:
- Premium bearing design matches OEM specifications
- Precision manufactured using premium-grade steel for outstanding durability and performance
- Controlled heat treating process for lasting performance and extended bearing life
- Industry leading coverage
- Professional technicians know they can depend on National
National – Multi Purpose Seal (Part No.1990)
from
$11.49
National has built a reputation as one of the most respected names in the industry. We have offered premium sealing solutions for more than 75 years. Our design team keeps pace with the industry and provides advanced solutions for today’s vehicles.
Product Features:
See More
Product Features:
- Low swell in hydrocarbon fluids
- Design type: spring loaded; multi-lip
- Provides good low temperature capability
- Temperature range: -40°F to 225°F; -40°C to 107°C
- Delivers quality and reliable performance for every type of repair
Yukon Gear – Master Overhaul Kit For Isuzu (Part No.14107)
from
$334.99
Yukon Master Overhaul kits give you all the high quality parts you need to start & finish every differential job. Yukon offers more tailor-made kits than any other manufacturer in the industry to meet your specific installation needs. This kit uses Timken bearings and races along with high quality seals and small parts. Included in this kit are carrier bearings and races, pinion bearings and races, pinion seal, complete shim kit, ring gear bolts, pinion nut, crush sleeve (if applicable), oil baffles and slingers (if applicable), Thread locking compound, marking compound with brush, and gasket. Yukon’s Master Overhaul kits are the most comprehensive and complete kits on the market. They do extensive research to ensure that every kit is specially tailored to your application.
Product Features:
See More
Product Features:
- Fits Isuzu Trooper dropout rear
- Drum brakes only
- Included are Timken bearings and races, pinion bearings and races, pinion seal, complete shim kit, ring gear bolts, pinion nut, crush sleeve, thread locker, marking compound with brush, and silicone.
National – Bearings (Part No.32007)
from
$70.99
National Oil Seals & Bearings offer a full line of premium oil seals and bearings.
Product Features:
See More
Product Features:
- Premium bearing design matches OEM specifications
- Precision manufactured using premium-grade steel for outstanding durability and performance
- Matched cup and cone components ensures consistent quality and outstanding performance
- Industry leading coverage
- Professional technicians know they can depend on National
National – Multi Purpose Seal (Part No.710247)
from
$13.49
National has built a reputation as one of the most respected names in the industry. We have offered premium sealing solutions for more than 75 years. Our design team keeps pace with the industry and provides advanced solutions for today’s vehicles.
Product Features:
See More
Product Features:
- Low swell in hydrocarbon fluids
- Design type: spring loaded; multi-lip
- Provides good low temperature capability
- Temperature range: -40°F to 225°F; -40°C to 107°C
- Delivers quality and reliable performance for every type of repair
Carquest Premium – CV Axle Shaft Assembly (Part No.NCV40021)
from
$126.99
Carquest Premium constant velocity (C.V.) axle shaft assemblies are 100% new units that are designed to meet or exceed OE specifications. Every part number is tested to guarantee a proper fit and reliable performance. Carquest Premium CV axles are assembl
Product Features:
See More
Product Features:
- Designed to meet or exceed OE specifications for fit, form and function
- 100% new axle and components
- New axle nut or attaching hardware included when applicable
- Bearings, races and housings are heat-treated for longer life
- Precision-engineered seal mating surfaces for leak-free performance
- High moly CV joint grease with stainless-steel boot bands
Anchor – Center Support Bearing Motor Mount: Center, 1 Piece (Part No.8538)
from
$20.29
Center support bearings or Carrier Support Bearings are used when the driveshaft is split into two sections. It serves as a junction on the drive shaft between the transmission and the differential allowing the driveshaft to flex, relieving stress on other drive line components. Each part is engineered and designed to OE Standards. Applicable to ISUZU 87-95;. Please verify your application.
Product Features:
See More
Product Features:
- MAXIMUM VIBRATION DAMPENING: Rubber cushion is made of high grade rubber that ensures maximum dampening of vibration and the ability to absorb over loads.
- HEAVY GAUGE STEEL FRAME: The housing frame is made from heavy gauge steel with durability that extends the service life.
- READY TO INSTALL: Most center supports include a sealed bearing and dust shield and are ready to install.
- For Years: 1987-1995
- Weight approx: 1 Lbs
- CUSHION INSERT ONLY
- WITHOUT BEARING
- WITHOUT FRAME
EMPI – RE CV Joint Boot Kit (Part No.K6010182671EMP)
from
$23.12
With Clamps and Grease The EMPIRE CV Joint Boot Kit is an ideal high quality aftermarket replacement that is manufactured to meet or exceed OE specifications for fit, form, and function. Install one boot kit per wheel to restore vehicle to optimal condition and protect the constant velocity joint from contamination
Product Features:
See More
Product Features:
- Help restore the vehicle to like-new condition
- Constructed of high strength OE materials
- Resists environmental contamination
- Protects the CV joint from premature failure
National – Bearings (Part No.02475)
from
$37.49
National Oil Seals & Bearings offer a full line of premium oil seals and bearings.
Product Features:
See More
Product Features:
- Premium bearing design matches OEM specifications
- Precision manufactured using premium-grade steel for outstanding durability and performance
- Crowned raceways and rollers to ensure even load distribution for maximum life
- Industry leading coverage
- Professional technicians know they can depend on National
EMPI – Clamp – CV Boot (Part No.4I25091157EMP)
from
$2.46
Clamp – CV Boot
Driveworks – Drive Shaft Center Support (Part No.S-HB-88107-E)
Yukon Gear – Minor Install Kit For Isuzu Differential (Part No.12065)
from
$59.99
Yukon Minimum installation kits are a low cost solution for gear changes in newer vehicles where the bearings can be reused. This kit uses all high quality components to ensure a smooth set up. kit includes a pinion seal, crush sleeve (if applicable), complete shim kit, marking compound and brush.
Product Features:
See More
Product Features:
- Fits Isuzu Trooper dropout rear
- Included are a pinion seal, crush sleeve, complete shim kit, marking compound and brush.
Dorman – C.V. Joint Solvent Welded Split Boot Kit Outer (Part No.614-632)
from
$21.99
Our CV Joint Boots provide various methods of eliminating the removal of the CV joint during installation. Uni-Fit boots can be stretched over the CV Joint and Quick Boots come in halves.
Product Features:
See More
Product Features:
- Save labor with easy installation methods
- Comes with grease and clamps
- Rugged silicone or neoprene materials offer a high resistance to cracking, rotting and leaking
- The Speedi and Quick Boot are installed without special tools
Yukon Gear – The Carrier Bearing Puller (Part No.56072)
from
$883.99
The Yukon carrier bearing Puller works with an impact gun to quickly and safely remove carrier bearings without damaging them. This unit comes with a handy bench top stand and works with up to one ton applications including Dana 70HD, Dana 80, 10.25″ & 10.5″ Ford, or GM & Chrysler 11.5″ differentials.
Product Features:
See More
Product Features:
- Carrier bearing puller
- Works with an impact gun to safely and easliy remove carrrier bearings
National – Bearings (Part No.306)
from
$44.49
National Oil Seals & Bearings offer a full line of premium oil seals and bearings.
Product Features:
See More
Product Features:
- Premium bearing design matches OEM specifications
- Precision manufactured using premium-grade steel for outstanding durability and performance
- Controlled heat treating process for lasting performance and extended bearing life
- Industry leading coverage
- Professional technicians know they can depend on National
National – Multi Purpose Seal (Part No.710319)
from
$8.49
National has built a reputation as one of the most respected names in the industry. We have offered premium sealing solutions for more than 75 years. Our design team keeps pace with the industry and provides advanced solutions for today’s vehicles.
Product Features:
See More
Product Features:
- Low swell in hydrocarbon fluids
- Design type: spring loaded; multi-lip
- Provides good low temperature capability
- Temperature range: -40°F to 225°F; -40°C to 107°C
- Delivers quality and reliable performance for every type of repair
Driveworks – Transfer Case Input Shaft Seal (Part No.S-710403)
National – Multi Purpose Seal (Part No.710516)
from
$34.49
National has built a reputation as one of the most respected names in the industry. We have offered premium sealing solutions for more than 75 years. Our design team keeps pace with the industry and provides advanced solutions for today’s vehicles.
Product Features:
See More
Product Features:
- Low swell in hydrocarbon fluids
- Design type: spring loaded; multi-lip
- Provides good low temperature capability
- Temperature range: -40°F to 225°F; -40°C to 107°C
- Delivers quality and reliable performance for every type of repair
Ishino – Wheel Seal (Part No.K801087029ISH)
from
$8.20
Wheel Seal
Popular 1989 Isuzu Trooper Drivetrains Categories
1989 Isuzu Trooper Drivetrains
You count on your 1989 Isuzu Trooper to run right. That means taking care of it with regular maintenance, necessary repairs, and the right parts. Advance Auto Parts can help with all of that thanks to our extensive inventory of trusted Drivetrains. With 53 Drivetrains ranging in price from $2.12 to $883.99, you’re sure to find everything you need for your 1989 Isuzu Trooper.
Brands matter. If you want to shop a specific Drivetrains brand, we stock 15 different brands like Valvoline, Dorman, and Driveworks. 1989 Isuzu Trooper Drivetrains start as low as $2.12!
One of the best ways to find top quality OEM or aftermarket Drivetrains is by asking professionals. Short of that, you can shop with confidence thanks to our 1,445 extensive product reviews on 1989 Isuzu Trooper Drivetrains. Some of the top-rated Drivetrains products we carry are C.V. Joint Solvent Welded Split Boot Kit Outer with 2.5 stars and Uni-Fit C.V. Joint Boot Kit Inner up to 3.58 In. Diameter with 3.2 stars.
Did we mention you can order your Drivetrains from our online catalog and have them shipped right to your garage? Or, if you feel like seeing the parts first-hand, search for your nearest Advance Auto Parts location above and pick up in-store when you’re ready. Browse our full Drivetrains inventory for your 1989 Isuzu Trooper below to get started!
Top-Rated Drivetrains Brands For Your 1989 Isuzu Trooper
Trusted Drivetrains OEM and aftermarket product brands are what Advance Auto Parts specializes in. The brands we work with are sure to keep that 1989 Isuzu Trooper running right for years to come. In our inventory you’ll find brands like Valvoline, Dorman, Driveworks, and even more.
Popular Valvoline Drivetrains
You’ll find popular Valvoline brand products across Differentials. All are waiting to get your 1989 Isuzu Trooper back on the road. Some of the top-rated Valvoline products in these categories are:
from
$12.79
(446)
MaxLife Multi-Vehicle (ATF) Full Synthetic Automatic Transmission Fluid, 1 Quart
Differential Oil
from
$12.49
(235)
High Performance Transmission & Differential Gear Oil: Conventional 85W-140, 1 Quart
Differential Oil
FAQs for 1989 Isuzu Trooper Drivetrains
What are the most purchased Drivetrains for the 1989 Isuzu Trooper?
Out of 53 Drivetrains for the 1989 Isuzu Trooper, the most popular in our inventory are:
What are the top-rated 1989 Isuzu Trooper Drivetrains?
Top-rated Drivetrains for your 1989 Isuzu Trooper based on customer reviews/ratings are:
from
$21.99
(88)
C.V. Joint Solvent Welded Split Boot Kit Outer
“This kit was easily installed and solved my problem”
from
$35.99
(11)
Uni-Fit C.V. Joint Boot Kit Inner up to 3.58 In. Diameter
“The only thing I could find to fit an aftermarket axle that was on the car. If your e46 330XI has a front axle with a round inner carrier instead if t”
from
$41.49
(2)
Shaft Repair Sleeve
“Used this to repair a camshaft sealing surface on a 2000 Sienna. it worked incredibly well and was easy to use. My first time using a repair sleeve ”
