1989 Ford Ranger Differentials

Find your specific 1989 Ford Ranger original or aftermarket Differentials below. Order your parts online and have delivered to your home or pick up in-store at Advance Auto.

Essential 1989 Ford Ranger Differentials

from

$12.99

Dana 30 & Dana 44 roll PIN, 0.235″ DIA, for cross pin shaft.

Product Features:

Roll pin for Dana Spicer 30 and Dana Spicer 44
0.235″ diameter

from

$241.99

8.8″ Ford TracLoc (with short ears–for late models only) clutch set, both sides.

Product Features:

Clutch kit
Fit Ford 8.8″ Trac Loc positraction

from

$38.49

National® has built a reputation as one of the most respected names in the industry. We have offered premium sealing solutions for more than 75 years. Our design team keeps pace with the industry and provides advanced solutions for today’s vehicles.

Product Features:

Designed to repair damaged, grooved or worn shafts
Durable stainless steel construction for corrosion-free sealing surface that surpasses most original shaft specifications
Ideal for a shaft where indications of seal wear, such as tracks or grooves have developed
Ultra-thin construction (0.01/0.25mm wall thickness) allows original seal size to be used with minimal additional lip loading
Easy to install with removable flange and installation tool
Installation tool reduces sleeve distortion and allows for installation without removal from the shaft

from

$209.99

Product Features:

Spider gear kit
Fits Ford 8.8″ 31 spline open differential
Includes two side gears, two pinion gears, cross pin shaft, cross pin bolt and spider gear thrust washers.

from

$24.45

Timken fuel efficient bearings are used in automotive axles to improve fuel economy, reduce weight, lower operating temperatures, minimize noise and increase reliability. Engineered surfaces help protect bearing components by minimizing skidding and sliding damage while withstanding small-particle contamination.

Product Features:

OE Quality
Made from quality Timken certified steel
Design features original equipment technology that optimizes bearing performance and lengthens maintenance intervals
Design allows bearings to carry evenly distributed loads
Power dense design reduces bearing weight

from

$9.99

5/16″-18 cover bolt, Dana Spicer 25, 27, 30 and 44, AMC Model 20 and Model 35, Chrysler 9.25 rear, GM 7.5″, 7.625″, 8.2″, 8.5″, 12 bolt passenger car and truck.

Product Features:

Cover bolt for Dana Spicer 25, 27, 30 and 44, AMC Model 20 and Model 35, GM 7.5″, 7.625″, 8.2″, 8.5″ and 12 bolt passenger car and truck.
1/2″ head

from

$24.43

SKF’s advanced PTFE oil seal offers optimum performance in extreme temperature and fluid environments. Other benefits of this seal include; reduced friction, longer service life, easier assembly, reduced weight and compact design.

Product Features:

Machined rubber sealing edge provides greater accuracy and consistency, as well as a better sealing surface.
The flanged design allows for easier and proper installation and helps avoid cocking.
The latex bore coat seals the outer diameter leak path and helps compensate for minor bore imperfections.
Extra dust lip helps keep harmful contaminants, such as dirt, out of the bearing and protects against rust and corrosion.

from

$10.49

Product Features:

SOLID SPACER FORD 8.8″ & 9″

from

$20.49

Mr. Gasket Axle Housing/Differential Cover or Rear End Gaskets are manufactured from a .047 inch thick cellulose/nitrile composite gasket material for excellent sealing and durability. They are precision die-cut for an excellent fit.

Product Features:

.047″ thick cellulose/nitrile composite gasket material
Precision die cut
Reusable

from

$19.99

Pro-King is the leading supplier of transmission and driveline products in the aftermarket.

Product Features:

All products are designed to meet or exceed OE quality, form, fit and funtion.

from

$134.99

Yukon Carrier installation kits are great, low cost kit for carrier changes such as Positraction or locker upgrades. Carrier installation kit for Ford 8.8″ differential. This kit contains carrier bearings, races and shims.

Product Features:

Fits Ford 8.8″
Includes carrier bearings and races and “super” carrier shim kit

from

$108.99

Motive Gear Differential Bearing Kits Include Front & Rear Pinion Bearing, Pinion Seal, Carrier Bearings, Pilot Bearing Where Applicable, Gear Marking Compound, Crush Sleeve, Pinion Nut, Brush, Thread Locking Compound And Cover Gasket Or Rtv

Product Features:

DANA 35 JEEP 1980-06 MASTER BRG KIT ’97 UP DANA 35 DODGE DAKOTA FRONT

from

$42.99

Chrome cover for 7.5″ Ford.

Product Features:

Fits Ford 7.5″
Chrome

from

$9.49

National Oil Seals & Bearings offer a full line of premium oil seals and bearings.

Product Features:

Premium bearing design matches OEM specifications
Precision manufactured using premium-grade steel for outstanding durability and performance
Crowned raceways and rollers to ensure even load distribution for maximum life
Industry leading coverage
Professional technicians know they can depend on National

from

$3.99

Product Features:

Outer slinger
Fits Dana Spicer 28

from

$7.99

Pinion nut for Ford 7.5″, 8″, 8.8″, 9 3/8″ & 9″. 1 1/6″ socket, 3/4″ x 20 thread.

Product Features:

Pinion nut for Ford 7.5″, 8″ and 9″
3/4″ x 20 thread
1 1/6″ socket

from

$174.99

Pro-King is the leading supplier of transmission and driveline products in the aftermarket. All products are designed to meet or exceed OE quality, form, fit and funtion.

Product Features:

High strength steel
Dual heat treating process

from

$7.99

Dana 28 & Dana 30 pinion gear Thrust washer. Also fits AMC Model 35 with 1.560″ side gear bore only.

Product Features:

Pinion gear thrust washer for Dana Spicer 25, 27 and 30

from

$10.99

Dana 25, Dana 27, & Dana 30 side gear Thrust washer.

Product Features:

Side gear thrust washer for Dana Spicer 25, 27, 30 and AMC Model 35
1.560″ I.D.
Fits standard open differentials only

from

$27.49

National Oil Seals & Bearings offer a full line of premium oil seals and bearings.

Product Features:

Premium bearing design matches OEM specifications
Precision manufactured using premium-grade steel for outstanding durability and performance
Crowned raceways and rollers to ensure even load distribution for maximum life
Industry leading coverage
Professional technicians know they can depend on National

from

$238.99

Product Features:

FRD 10BL 7.5 R/P 3.08 MG

from

$246.99

Yukon forged yoke for Ford 8.8″ with a 1350 U/joint size (stronger than billet). 3.625″ snap ring span, 1.188″ cap diameter. Outside snap ring. All Yukon yokes come with a one year warranty against manufacturing defects.

Product Features:

Fits Ford 8.8″
30 spline
1350 u-joint size
Outside snap ring design
3.625″ snap ring span
1.188″ cap diameter
U-bolt style

from

$17.99

Yukon 1541H alloy right hand rear axle for Model 35 (drum brakes) with a 54 tooth, 2.7″ ABS ring. axle has a length of 29-1/4″ inches and 27 splines. Yukon 1541H alloy axles offer a strength increase over stock while retaining a low cost. Yukon 1541H allo

Product Features:

Pinion depth shims for AMC Model 35 and Chrysler 7.25″

from

$2.99

Pro-King is the leading supplier of transmission and driveline products in the aftermarket.

Product Features:

All products are designed to meet or exceed OE quality, form, fit and funtion.

from

$201.99

USA Standard Master Overhaul kits let you finish your install with confidence. This kit uses Koyo bearings and races. Included are carrier bearings and races, pinion bearings and races, pinion seal, complete shim kit, ring gear bolts, pinion nut, crush sleeve (if applicable), oil baffles and slingers (if applicable), threading locking compound, marking compound with brush and gasket.

Product Features:

Fits 2009 and down Ford 8.8″
Uses Koyo bearings and races
Included are carrier bearings and races, pinion bearings and races, pinion seal, complete shim kit, ring gear bolts, pinion nut, crush sleeve, thread locker, marking compound with brush and gasket.

from

$0.99

Pro-King is the leading supplier of transmission and driveline products in the aftermarket.

Product Features:

All products are designed to meet or exceed OE quality, form, fit and funtion.

from

$42.99

Cross pin shaft (0.875″) for ’86 and newer 8.8″ Ford.

Product Features:

Cross pin shaft for Ford 8.8″
0.875″ diameter

from

$49.99

Product Features:

USA Standard Gear heavy-duty cross pin shaft
Fits Dana Spicer 30
Works with Spartan Locker or standard open spider gears

Popular 1989 Ford Ranger Differentials Categories

Differential Oil

Rear Differential Cover Gaskets

Differential Covers

Differential Pinion Shaft Lock Bolts

Differential Bearings

Differential Axle Shafts

Differential Pinion Pilot Bearings

Differential Cover Bolts

Differential Bearing Kits

Front Differential Pinion Bearings

Differential Spider Gear Kits

Differential Rebuild Kits

Differential Carrier Shim Kits

Differential Pinion Seals

Differential Clutch Packs

Differential Ring and Pinions

Differential End Yokes

Rear Differential Pinion Bearings

Differential Carrier Bearings

Differential Lock Springs

Rear Housing Cover Gaskets

Differential Pinion Bearing Kits

Differential Seals

Complete Differentials

Differential Ring Gear Bolts

Bearing Race Drivers

Differential Crush Sleeves

Differential Side Bearing Spacers

Differential Pinion Shims

Differential Pinion Shaft Nuts

Differential Gear Install Kits

Differential Cross Pins

Differential Side Gear Thrust Washers

Differential Pinion Gear Thrust Washers

Differential Drive Pinion Oil Deflectors

Auxiliary Shaft Bearings

Differential Spider and Pinion Gear Kits

Differential Pinion Bearing Spacers

Maybe you’re in the middle of a full rebuild of that 1989 Ford Ranger. Maybe you just need a couple of Differentials. Either way, Advance Auto Parts has 133 different Differentials in our inventory ranging from $0.99 to $1,566.99. That means you can find the exact parts or products you need to keep that 1989 Ford Ranger running smoothly.

Differentials are only as good as their brand. We stock 19 different brands to make sure you have plenty of trusted parts to choose from for your 1989 Ford Ranger. FELPRO, Dorman, and Driveworks are just some of the brands we stock. Search for brands you know or compare prices and reviews to help you decide!

We know you’ll find the perfect Differentials for your 1989 Ford Ranger, but don’t take our word for it – read our customer ratings and reviews and buy with confidence. Out of the 872 reviews in this category, some of the top rated parts include Differential Shaft Lock Bolt with 4.0 stars and Bearings with 3.9 stars.

So if you’re in the market for aftermarket Differentials to keep your 1989 Ford Ranger rolling for years to come, look no further. Shop online and have your products shipped direct to your door, or pick up at the nearest Advance Auto Parts location today!

Differentials Brands To Make Your 1989 Ford Ranger Last

Simple repair, complete replacement, or a full rebuild. No matter the job, your 1989 Ford Ranger demands trusted brand parts and products to keep it running. Many trusted brands of Differentials make up Advance Auto Parts’ inventory, and all are ready to help make your Ranger the best it can be. Be sure to browse some of our top Differentials brands and parts.

Popular Powertrax Differentials

We carry Powertrax parts in our stock across Complete Differentials categories, plus more. For a 1989 Ford Ranger, our most popular Powertrax Differentials include:

from $444.99

(1)

Lock Right Locker

Complete Differentials

Top 1989 Ford Ranger Differentials from Felpro

Felpro products are another trusted brand when it comes to Differentials for your 1989 Ford Ranger. Popular Felpro parts include:

from $14.99

(121)

Differential Cover Gasket

Rear Differential Cover Gaskets

from $6.49

(13)

Differential Cover Gasket

Rear Differential Cover Gaskets

FAQs for 1989 Ford Ranger Differentials

What are the most purchased Differentials for the 1989 Ford Ranger?

Out of 133 Differentials for the 1989 Ford Ranger, the most popular in our inventory are:

from $13.99

(14)

Tapered Cone/Cup Wheel Bearing Set

Front Differential Pinion Bearings

from $34.99

(34)

Rear Differential Cover

Differential Covers

from $57.99

This product is not rated

3 Qt – 80W90 Conventional Gear Oil With Posi Additive

Differential Oil

What are the top-rated 1989 Ford Ranger Differentials?

Top-rated Differentials for your 1989 Ford Ranger based on customer reviews/ratings are:

from $5.99

(11)

Differential Shaft Lock Bolt

“great”

from $23.99

(7)

Bearings

“Good price”

from $169.99

(4)

Wheel Bearing and Seal Kit

“Complete kit with for my rebuild. I was lucky to get awesome service from the salesman. Parts were very reasonable price-wise.”

1989 Ford Ranger Differentials

More 1989 Ford Ranger Differentials

Essential 1989 Ford Ranger Differentials

Yukon Gear – Dana 30 / 44 Roll Pin Replacement (Part No.33312)

Yukon Gear – 8.8" Ford Tracloc Clutch Set, Both Sides (Part No.16018)

National – Shaft Repair Sleeve (Part No.99155)

USA Standard Gear – Standard Spider Gear Set For Ford 8.8", 31 Spline (Part No.39016)

Timken – Wheel Bearing (Part No.K80001175562TIM)

Yukon Gear – Dana 25, 27, 30, 44, Model 20 And Model 35, GM 7.5", 8.2", 8.5", 12P, 12T, C9.25 Rear Cover Bolt (Part No.33286)

SKF – Axle Shaft Seal (Part No.K4021196703SKF)

Motive Gear – Differential Pinion Solid Spacer Kit w/Shims (Part No.4104)

Mr. Gasket – Differential Gasket (Part No.142)

Pro-King – Shim Kit (Part No.741A200)

Yukon Gear – Carrier Installation Kit For Ford 8.8" Differential (Part No.57007)

Motive Gear – Differential Bearing Kit – Koyo (Part No.R35JR)

Yukon Gear – Chrome Cover For 7.5" Ford (Part No.32008)

National – Bearings (Part No.M86610)

Yukon Gear – Replacement Outer Slinger For Dana 28 (Part No.33016)

Yukon Gear – Pinion Nut (Part No.33154)

Pro-King – Rear Axle Shaft Kit (Part No.AXK-279)

Yukon Gear – Dana 28 & Dana 30 Pinion Gear Thrust Washer (Part No.33285)

Yukon Gear – Dana 30 Side Gear Thrust Washer (Part No.33284)

National – Bearings (Part No.HM88648)

Motive Gear – Differential Ring and Pinion (Part No.F7.5-308)

Yukon Gear – Forged Yoke For Ford 8.8" With A 1350 U/Joint Size (Part No.41051)

Yukon Gear – Replacement Pinion Depth Shims For Dana 35, Model 35 & Chrysler 7.25" (Part No.55014)

Pro-King – Differential Crush Sleeve (Part No.761A034)

USA Standard Gear – Master Overhaul Kit for ’09 & Down Ford 8.8" Differential. (Part No.37030)

Pro-King – Differential Ring Gear Bolt (Part No.761A935)

Yukon Gear – Cross Pin Shaft (0.875") For ’86 And Newer 8.8" Ford (Part No.33331)

USA Standard Gear – Spartan Locker Replacement Cross Pin For Dana 30 (Part No.17016)

Popular 1989 Ford Ranger Differentials Categories