1989 Ford F53 Drive Shafts and Axles
More 1989 Ford F53 Drive Shafts and Axles
Find your specific 1989 Ford F53 original or aftermarket Drive Shafts and Axles below. Order your parts online and have delivered to your home or pick up in-store at Advance Auto.
Essential 1989 Ford F53 Drive Shafts and Axles
National – Bearings (Part No.88508)
from
$45.99
National Oil Seals & Bearings offer a full line of premium oil seals and bearings.
Product Features:
See More
Product Features:
- Premium bearing design matches OEM specifications
- Precision manufactured using premium-grade steel for outstanding durability and performance
- Controlled heat treating process for lasting performance and extended bearing life
- Industry leading coverage
- Professional technicians know they can depend on National
Driveworks – Drive Shaft Center Support (Part No.S-HB-88508-A)
from
$29.49
Drive Shaft Center Support
Anchor – Center Support Bearing Motor Mount: Center, 1 Piece (Part No.6107)
from
$122.99
Center support bearings or Carrier Support Bearings are used when the driveshaft is split into two sections. It serves as a junction on the drive shaft between the transmission and the differential allowing the driveshaft to flex, relieving stress on other drive line components. Each part is engineered and designed to OE Standards. Applicable to FORD 03-15;. Please verify your application.
Product Features:
See More
Product Features:
- MAXIMUM VIBRATION DAMPENING: Rubber cushion is made of high grade rubber that ensures maximum dampening of vibration and the ability to absorb over loads.
- HEAVY GAUGE STEEL FRAME: The housing frame is made from heavy gauge steel with durability that extends the service life.
- READY TO INSTALL: Most center supports include a sealed bearing and dust shield and are ready to install.
- For Years: 2003-2015
- Weight approx: 4 Lbs
- BEARING ID / BORE: 1.5750 INCH / 40 MM
- CENTERLINE: 2.75 INCH / 70 MM
- MOUNT WIDTH: 6.62 INCH / 168 MM
- STYLE: HORSESHOE
- WITH PLATE
- WITHOUT STUDS
SKF – Driveshaft Support with Bearing (Part No.K1030325692SKF)
from
$59.31
Rugged SKF drive shaft support bearings are built to meet or exceed OE specifications. They are also built on the years of experience that SKF has earned designing and supplying bearings to the world’s largest OE manufacturers. Engineered and manufactured to specific application requirements that deliver precise drive shaft alignment and support. Center support bearings are pre-lubricated and sealed with metal reinforced seals to prevent contamination. Rubber support cushions are manufactured from durable rubber compounds that provide maximum support while isolating the driveline shaft from damaging vibration. Drive shaft support frames are constructed from high quality steel or aluminum that provides additional strength and long life in harsh environments.
Product Features:
See More
Product Features:
- OE Quality, fit and performance
- Precise driveshaft alignment and support
- Pre-lubricated and sealed
- Metal reinforced seals to prevent contamination
- Manufactured from durable rubber compounds
National – Multi Purpose Bearing (Part No.HB-88107-A)
from
$44.99
National Oil Seals & Bearings offer a full line of premium oil seals and bearings.
Product Features:
See More
Product Features:
- Premium bearing design matches OEM specifications
- Precision manufactured using premium-grade steel for outstanding durability and performance
- Controlled heat treating process for lasting performance and extended bearing life
- Industry leading coverage
- Professional technicians know they can depend on National
National – Multi Purpose Bearing (Part No.HB-88508-AA)
from
$58.99
National Oil Seals & Bearings offer a full line of premium oil seals and bearings.
Product Features:
See More
Product Features:
- Premium bearing design matches OEM specifications
- Precision manufactured using premium-grade steel for outstanding durability and performance
- Controlled heat treating process for lasting performance and extended bearing life
- Industry leading coverage
- Professional technicians know they can depend on National
Driveworks – Drive Shaft Center Support (Part No.S-HB-88508-AA)
Driveworks – Drive Shaft Center Support (Part No.S-HB-88108-FD)
National – Bearings (Part No.28580)
from
$48.49
National Oil Seals & Bearings offer a full line of premium oil seals and bearings.
Product Features:
See More
Product Features:
- Premium bearing design matches OEM specifications
- Precision manufactured using premium-grade steel for outstanding durability and performance
- Crowned raceways and rollers to ensure even load distribution for maximum life
- Industry leading coverage
- Professional technicians know they can depend on National
National – Shaft Repair Sleeve (Part No.99139)
from
$39.99
National® has built a reputation as one of the most respected names in the industry. We have offered premium sealing solutions for more than 75 years. Our design team keeps pace with the industry and provides advanced solutions for today’s vehicles.
Product Features:
See More
Product Features:
- Designed to repair damaged, grooved or worn shafts
- Durable stainless steel construction for corrosion-free sealing surface that surpasses most original shaft specifications
- Ideal for a shaft where indications of seal wear, such as tracks or grooves have developed
- Ultra-thin construction (0.01/0.25mm wall thickness) allows original seal size to be used with minimal additional lip loading
- Easy to install with removable flange and installation tool
- Installation tool reduces sleeve distortion and allows for installation without removal from the shaft
Spicer – Universal Joint (Part No.5-1410X)
from
$51.99
You expect a lot from your vehicle, and Spicer Life Series (SPL) universal joints deliver. SPL universal joints consistently outperform competitors, so you can hit the road or trail with confidence. Check out the difference that SPL universal joints can make in your vehicle, and make sure you’re getting the longer life, increased bearing capacity and lower maintenance costs that Spicer Life Series (SPL) can provide.
See More
Spicer – Universal Joint (Part No.5-160X)
from
$40.99
When you see the Spicer name, you know you are buying the highest quality product available. Spicer universal joints are no exception. Dana manufactures a full line of Spicer universal joints that are engineered to ensure longer life for vehicles.
See More
Dorman – Axle Spindle Nut (Part No.K4030212888DOR)
from
$3.40
Dorman’s Spindle Nut is manufactured for high corrosion resistance and a long service life. Depending on the application, it is also available in a kit that includes the nut, washer, and retainer.
Product Features:
See More
Product Features:
- Direct replacement for a proper fit every time
- High quality steel construction
- Conveniently available in many styles and in packs of different quantities
- Dorman’s Spindle Nuts are constructed to strict engineering quality standards
Dorman – Rear Axle Differential Vent (Part No.924-263)
from
$9.99
This axle vent is designed to match the fit and function of the original vent on specified vehicles, and is engineered for durability and reliable performance.
Product Features:
See More
Product Features:
- Direct replacement – this axle vent is designed to match the fit and function of the original vent on specified vehicles
- Restores functionality – reliable replacement for an original vent that has failed due to blockage or fatigue
- Durable construction – this part is made from quality materials to ensure reliable performance and long service life
- Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience
Popular 1989 Ford F53 Drive Shafts and Axles Categories
1989 Ford F53 Drive Shafts and Axles
Maybe you’re in the middle of a full rebuild of that 1989 Ford F53. Maybe you just need a couple of Drive Shafts and Axles. Either way, Advance Auto Parts has 17 different Drive Shafts and Axles in our inventory ranging from $3.40 to $73.99. That means you can find the exact parts or products you need to keep that 1989 Ford F53 running smoothly.
Drive Shafts and Axles are only as good as their brand. We stock 4 different brands to make sure you have plenty of trusted parts to choose from for your 1989 Ford F53. Spicer, National, and Anchor are just some of the brands we stock. Search for brands you know or compare prices and reviews to help you decide!
We know you’ll find the perfect Drive Shafts and Axles for your 1989 Ford F53, but don’t take our word for it – read our customer ratings and reviews and buy with confidence.
So if you’re in the market for aftermarket Drive Shafts and Axles to keep your 1989 Ford F53 rolling for years to come, look no further. Shop online and have your products shipped direct to your door, or pick up at the nearest Advance Auto Parts location today!
Drive Shafts and Axles Brands To Make Your 1989 Ford F53 Last
Simple repair, complete replacement, or a full rebuild. No matter the job, your 1989 Ford F53 demands trusted brand parts and products to keep it running. Many trusted brands of Drive Shafts and Axles make up Advance Auto Parts’ inventory, and all are ready to help make your F53 the best it can be. Be sure to browse some of our top Drive Shafts and Axles brands and parts.
Popular Anchor Drive Shafts and Axles
We carry Anchor parts in our stock across Center Support Bearings categories, plus more. For a 1989 Ford F53, our most popular Anchor Drive Shafts and Axles include:
Top 1989 Ford F53 Drive Shafts and Axles from National
National products are another trusted brand when it comes to Drive Shafts and Axles for your 1989 Ford F53. Popular National parts include:
FAQs for 1989 Ford F53 Drive Shafts and Axles
What are the most purchased Drive Shafts and Axles for the 1989 Ford F53?
Out of 17 Drive Shafts and Axles for the 1989 Ford F53, the most popular in our inventory are:
