1989 Ford F53 Belts and Hoses

Essential 1989 Ford F53 Belts and Hoses

ACDelco – Professional V-Ribbed Serpentine Belt (Part No.W1000603907ACD)

Professional V-Ribbed Serpentine Belt

from

$51.26
ACDelco Professional, premium aftermarket V-Ribbed Advanced Technology Belts serve as replacement belts for accessory belt drive systems (ABDS) and other serpentine belt applications. They are designed using advanced manufacturing technology and premium EPDM rubber construction to provide customers with superior accessory belt drive systems (ABDS) and new-vehicle-type performance. These premium aftermarket replacement v-ribbed advanced technology belts are manufactured to meet or exceed your expectations for fit, form, and function.

Product Features:
  • Made with temperature and crack resistant EPDM rubber for a long life and quiet, dependable performance
  • Is the belt of choice by professional technicians, lasting 50% to 60% longer than retail belts (low priced belts sold at car part stores)
  • Its precision dimension control of rib profile transmits load efficiently throughout the accessory belt drive systems (ABDS) allowing components to operate at optimum levels
  • Able to operate and accept misalignment in the accessory belt drive systems (ABDS) far greater than other serpentine belts
  • Its flexible construction allows the belt to withstand billions of topside and backside bends resulting in a long belt life
See More

Gates – Hi-Power« II Classical Section Wrapped V-Belt (Part No.A59)

Hi-Power« II Classical Section Wrapped V-Belt

from

$18.99
Product Features:
  • Smoother running with less slip and wear for excellent belt service life and reduced pulley wear
  • High-quality rubber compound protects the belt against heat, ozone and sunlight
  • Proprietary Flex-Weave cover is a patented fabric construction, providing extended protection to the belt core from oil, contaminants and heat for longer belt life
  • Flex-bonded cords strongly adhere to the body of the belt, resulting in equal load distribution and absorption of bending stress, fatigue and shock loads without cord deterioration
  • Meets RMA oil and heat resistant standards and static conductivity requirements
  • Temperature Range: -22 Deg. F to +140 Deg. F (-30 Deg. C to +60 Deg. C)
  • NOTE: Available in A, B, C, D and E cross-sections as well as Hi-Power II PowerBand V-belts
See More

Gates – Premium 5/16 X 50 Ft Heater Hose by Gates (sold by each) (Part No.28408)

Premium 5/16 X 50 Ft Heater Hose by Gates (sold by each)

from

$1.79
Premium hose constructed for long service life.

Product Features:
  • Good resistance to high temperatures for extended periods of time
  • Similar to SAE 20R3 Class D-3
  • Temperature rating: -40 Deg. F to +257 Deg. F (-40 Deg. C to +125 Deg. C)
  • CAUTION: Do not use for fuel or oil transfer applications.
See More

Dayco – Molded Heater Hose; EPDM Rubber, 5/8 Inch Diameter, 22 Inch Length (Part No.87891)

Molded Heater Hose; EPDM Rubber, 5/8 Inch Diameter, 22 Inch Length

from

$36.49
Providing reliable service in applications requiring molded hoses in small diameters, the Dayco small I.D. heater hose is designed to replace OEM coolant hoses. Made with the same bends and routing as the original assembly, this molded hose is meant to fit the vehicle precisely. The knitted reinforcement and synthetic EPDM construction provide high-strength performance and resistance to detrimental environmental elements, coolants and temperature variations of -40°F (-40°C) to +257°F (+125°C) and the “quick connect” end allows for fast, convenient installation.

Product Features:
  • Meets the requirements of SAE J20R3, Class D-1
  • Designed to meet Type EC electro-chemical requirements as specified in SAE J1684, which prevents inner tube deterioration caused by the build-up of static electric charges
  • Engineered as an OEM replacement
  • The knitted polyester reinforcement provides high burst strength and resists degradation from temperature extremes and moisture
See More

Gates – Straight Heater Hose: EPDM, Direct Fit, 0.75" Inside Diameter (Sold by foot) (Part No.28412)

Straight Heater Hose: EPDM, Direct Fit, 0.75" Inside Diameter (Sold by foot)

from

$3.99
Premium hose constructed for long service life.

Product Features:
  • Good resistance to high temperatures for extended periods of time, which prolongs service life
  • Meets SAE 20R3 Standard Wall Class D-2 requirements
  • Temperature Range: -40 Deg. F to +257 Deg. F (-40 Deg. C to +125 Deg. C)
  • CAUTION: Do not use for fuel or oil transfer applications
  • CAUTION: Do not use for fuel or oil transfer applications
  • PLEASE NOTE: Item is priced and sold by the foot. See store for details.
See More

Gates – Safety Stripe« Standard Straight Heater Hose (Part No.28409)

Safety Stripe« Standard Straight Heater Hose

from

$2.49
Premium hose constructed for long service life.

Product Features:
  • Good resistance to high temperatures for extended periods of time, which prolongs service life
  • Meets SAE 20R3 Standard Wall Class D-2 requirements
  • Temperature Range: -40 Deg. F to +257 Deg. F (-40 Deg. C to +125 Deg. C)
  • Caution: Do not use for fuel or oil transfer applications
  • PLEASE NOTE: Item is priced and sold by the foot. See store for details.
See More

Dorman – Idler Pulley (Pulley only) (Part No.419-610)

Idler Pulley (Pulley only)

from

$12.49
This accessory drive belt tensioner pulley is designed to match the fit and function of the original pulley on specified applications. Made of quality materials, it is engineered for reliable performance and durability.

Product Features:
  • Direct replacement – this accessory drive belt tensioner pulley is designed to match the fit and function of the original pulley on specified applications
  • Restores functionality – reliable replacement for an original pulley that has failed due to vibration or corrosion
  • Durable construction – this part is made from quality materials to ensure reliable performance and long service life
  • Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience
See More

Gates – DriveAlign½ Belt Drive Idler/Tensioner Pulley (Part No.38001)

DriveAlign½ Belt Drive Idler/Tensioner Pulley

from

$32.99
Product Features:
  • Steel and thermoplastic construction designed to tight manufacturing tolerances for high durability and quality performance
  • Built to last with a superior resistance to dirt, salt, chemicals and other under-hood contaminants
  • OE-quality fit for virtually every domestic or import vehicle on the road today
  • Bearings meet or exceed OE standards with application-specific speed and load requirements, to withstand high under hood temperatures
  • Premium bearings eliminate bearing noise
  • Mounting hardware included for some popular applications
  • Reliable operation under severe conditions
See More

Dayco – Serpentine Belt Tensioner: 1 Piece, Built To Outperform And Outlast OE Parts (Part No.89221)

Serpentine Belt Tensioner: 1 Piece, Built To Outperform And Outlast OE Parts

from

$68.99
The Dayco automatic belt tensioner features Dayco’s original, patented flat spring design to provide less operating range variation. It reduces the risk of premature accessory bearing failure due to high tension and lessens the risk of belt noise and slip

Product Features:
  • Endures the toughest conditions while promoting quieter performance and longer life
  • Features a steel pivot tube on specific designs for enhanced stability
  • Built to outperform and outlast competitive OE parts
See More

Dayco – Serpentine Belt Tensioner; 1 Piece, HD, Built To Outperform And Outlast OE Parts (Part No.89237)

Serpentine Belt Tensioner; 1 Piece, HD, Built To Outperform And Outlast OE Parts

from

$61.99
The Dayco automatic belt tensioner features Dayco’s original, patented flat spring design to provide less operating range variation. It reduces the risk of premature accessory bearing failure due to high tension and lessens the risk of belt noise and slippage – or poor performance caused by low tension. A PTFE string wound within the spring resists abrasion and dampens noise. Dayco’s tensioner is also designed with a heavy-duty cast aluminum spring case and arm, which helps resist cracking and fatigue and offers additional strength, lessening the risk of distortion. Additional premium thermoplastic rubber spring slot plugs and rubber O-ring seals help keep contaminants out and zinc coated mounting bolts resist rust.

Product Features:
  • Endures the toughest conditions while promoting quieter performance and longer life
  • Features a steel pivot tube on specific designs for enhanced stability
  • Built to outperform and outlast competitive OE parts
See More

Dorman – Heater Hose Connecto (Part No.R30361329114DOR)

Heater Hose Connecto

from

$10.15
Heater Hose Connecto

Dorman – Help – Heater Hose Connector – 5/8 In. Tube x 5/8 In. Hose (Part No.47165)

Heater Hose Connector - 5/8 In. Tube x 5/8 In. Hose

from

$15.99
Made of quality materials, this HVAC heater hose connector matches the fit and function of an original equipment connector to restore leak-free performance.

Product Features:
  • Quality replacement – this heater hose connector matches the fit and function of the original equipment connector
  • Durable construction – this heater hose connector is made of quality materials for a precise fit and leak-free durability
  • Cost-effective solution – offers original equipment quality at competitive price
  • Performance tested – this connector has been rigorously pressure tested to ensure reliable performance
See More

ACDelco – Professional Molded Coolant Hose (Part No.G2000576786ACD)

Professional Molded Coolant Hose

from

$49.66
ACDelco Professional, premium aftermarket Molded Coolant Hoses are composed of specially blended materials to help resist electrochemical degradation (ECD), the leading cause of hose failure. They are specially designed, GM OE style factory-molded hoses to fit today’s smaller, tighter-fitting engine compartments. ACDelco Professional Molded Coolant Hoses are temperature rated from -40 degrees Fahrenheit to 275 degrees Fahrenheit (-40 degrees Celsius to 135 degrees Celsius) and are approved for Marine applications. Do not use for fuel or oil transfer applications. These premium aftermarket replacement molded coolant hoses are manufactured to meet or exceed your expectations for fit, form, and function.

Product Features:
  • Has a heat and ozone resistant cover to increase the life of the hose
  • Comes with a protective sleeve to help duplicate GM OE designs for proper fit and function
  • Made of re-engineered materials to resist vacuum collapse and also reduce the need for internal springs in many applications
  • Installs without buckling, bending out of shape, or straining at the connection for easy installation
  • Inside diameters ranges from 1?4 in to 1 in to fit different types of vehicles
See More

Dayco – Curved Radiator Hoses: EPDM Rubber, Standard Duty, 19" Long, 1.75" Diameter (Part No.E72026)

Curved Radiator Hoses: EPDM Rubber, Standard Duty, 19" Long, 1.75" Diameter

from

$30.99
The Dayco curved radiator hose features knitted reinforcement, a protective sleeve and a synthetic EPDM rubber construction for high-strength performance, protection against abrasion and resistance to oil, mud, salt, road debris, ozone and coolants. It can also withstand temperature variations of -40 Deg. F (-40 Deg. C) to +257 Deg. F (+125 Deg. C). The inner base tube is reinforced with knitted rayon for maximum strength and burst resistance for the life of the hose.

Product Features:
  • Meets SAE J20R4, Class D-1 requirements
  • Meets Type EC electro-chemical requirements as specified in SAE J1684, which prevents inner tube deterioration caused by the build-up of static electric charges
  • Provides excellent protection against external elements
See More

Dayco – Curved Radiator Hoses: EPDM Rubber, Standard Duty, 16" Long, 1.78" Diameter (Part No.E72223)

Curved Radiator Hoses: EPDM Rubber, Standard Duty, 16" Long, 1.78" Diameter

from

$19.79
The Dayco curved radiator hose features knitted reinforcement, a protective sleeve and a synthetic EPDM rubber construction for high-strength performance, protection against abrasion and resistance to oil, mud, salt, road debris, ozone and coolants. It can also withstand temperature variations of -40 Deg. F (-40 Deg. C) to +257 Deg. F (+125 Deg. C). The inner base tube is reinforced with knitted rayon for maximum strength and burst resistance for the life of the hose.

Product Features:
  • Meets SAE J20R4, Class D-1 requirements
  • Meets Type EC electro-chemical requirements as specified in SAE J1684, which prevents inner tube deterioration caused by the build-up of static electric charges
  • Provides excellent protection against external elements
See More

Gates – Straight Heater Hose: EPDM, Direct Fit, 0.625" Inside Diameter (Sold by foot) (Part No.28411)

Straight Heater Hose: EPDM, Direct Fit, 0.625" Inside Diameter (Sold by foot)

from

$1.49
Premium hose constructed for long service life.

Product Features:
  • Good resistance to high temperatures for extended periods of time, which prolongs service life
  • Meets SAE 20R3 Standard Wall Class D-2 requirements
  • Temperature Range: -40 Deg. F to +257 Deg. F (-40 Deg. C to +125 Deg. C)
  • CAUTION: Do not use for fuel or oil transfer applications
  • CAUTION: Do not use for fuel or oil transfer applications
  • PLEASE NOTE: Item is priced and sold by the foot. See store for details.
See More

Imperial – Metal Line Kit for Engine Oil Coolers (Part No.240293)

Metal Line Kit for Engine Oil Coolers

from

$79.99
Metal line kit for engine oil coolers. Routes oil lines past exhaust manifolds.

Product Features:
  • Metal line kit
  • For use in engine oil cooler applications
  • Routes oil lines past exhaust manifolds
  • Provides protection where standard hoses can fail
See More

Imperial – 1/2" x 12′ Engine Oil Cooler Hose (Part No.240112)

1/2" x 12' Engine Oil Cooler Hose

from

$48.49
1/2″ x 12′ engine oil cooler hose. Imperial engine hose is specifically designed for engine cooling applications.

Product Features:
  • Engine oil cooler hose
  • Size: 1/2″ x 12′
  • Designed for engine oil applications
  • 12′ hose length accommodates most applications
See More

Dayco – Serpentine Idler/Tensioner Pulley; Polymer, 90mm Dia., 31mm Width, Smooth (Part No.89001)

Serpentine Idler/Tensioner Pulley; Polymer, 90mm Dia., 31mm Width, Smooth

from

$20.79
Dayco idler/tensioner pulleys are built with smoother surfaces and tighter dimensional tolerances, which translates to less vibration and longer belt life. In addition to stamped, forged steel and powdered metal pulleys, Dayco also designs ultra-strong plastic pulleys with specially formulated glass-filled polymers that resist wear and tear. Premium lubricated ball bearings and double high temperature seals ensure peak bearing performance, the most critical element of a pulley’s service life.

Product Features:
  • Designed for the majority of automotive vehicle applications on the road today
  • High-quality materials help resist wear and improve belt life
  • Features premium lubricated bearings to extend service life
  • Meets or exceeds OE quality
See More

Dayco – Serpentine Idler/Tensioner Pulley; Steel, 76mm Dia., 31mm Width, Smooth (Part No.89007)

Serpentine Idler/Tensioner Pulley; Steel, 76mm Dia., 31mm Width, Smooth

from

$29.99
Dayco idler/tensioner pulleys are built with smoother surfaces and tighter dimensional tolerances, which translates to less vibration and longer belt life. In addition to stamped, forged steel and powdered metal pulleys, Dayco also designs ultra-strong pl

Product Features:
  • Designed for the majority of automotive vehicle applications on the road today
  • High-quality materials help resist wear and improve belt life
  • Features premium lubricated bearings to extend service life
  • Meets or exceeds OE quality
See More

Dayco – Flex Radiator Hoses; EPDM Rubber, 19.5 In. Long, 1.75 In. to 1.5 In. Inner Dia. (Part No.81261)

Flex Radiator Hoses; EPDM Rubber, 19.5 In. Long, 1.75 In. to 1.5 In. Inner Dia.

from

$38.49
The Dayco flex radiator hose replaces straight or molded radiator hoses on a wide range of engine applications. Precision molded in standard lengths, it features a knitted reinforcement and synthetic EPDM construction. This hose is designed to prevent spl

Product Features:
  • Designed to meet OE specifications
  • Not suitable for oil or heat transfer
  • Meets SAE J20R4, Class D-2 requirements for improved service hoses
  • This hose is designed to prevent splitting, ballooning, and elongation
See More

Dayco – Curved Radiator Hoses: EPDM Rubber, Standard Duty, 11" Long, 1.75" Diameter (Part No.B71533)

Curved Radiator Hoses: EPDM Rubber, Standard Duty, 11" Long, 1.75" Diameter

from

$21.99
The Dayco curved radiator hose features knitted reinforcement, a protective sleeve and a synthetic EPDM rubber construction for high-strength performance, protection against abrasion and resistance to oil, mud, salt, road debris, ozone and coolants. It can also withstand temperature variations of -40 Deg. F (-40 Deg. C) to +257 Deg. F (+125 Deg. C). The inner base tube is reinforced with knitted rayon for maximum strength and burst resistance for the life of the hose.

Product Features:
  • Meets SAE J20R4, Class D-1 requirements
  • Meets Type EC electro-chemical requirements as specified in SAE J1684, which prevents inner tube deterioration caused by the build-up of static electric charges
  • Provides excellent protection against external elements
See More

Gates – Emission Control Duct Hose (Part No.28095)

Emission Control Duct Hose

from

$12.99
Product Features:
  • Aluminum polyester construction for economy
  • Black fiberglass aluminum for greater strength and durability
  • Completely +exible and easily bent, yet retains shape after forming
  • Resists heat, cold, oil and water
  • Temperature Range: -40 Deg. F to 400 Deg. F (-40 Deg. C to +204 Deg. C)
  • Temperature rating: -40 Deg. F to 400 Deg. F (-40 Deg. C to +204 Deg. C).
See More

Dayco – Poly Rib Belt Serpentine Belt; 49.5 Long, 6 Rib Count (Part No.5060495)

Poly Rib Belt Serpentine Belt; 49.5 Long, 6 Rib Count

from

$22.79
Constructed with aramid reinforced EPDM compounds, the Dayco poly-V serpentine belt delivers  more than just OE quality. Developed through extensive laboratory and road testing, the rib profile in this EPDM belt has been engineered to conform to high mileage, worn or misaligned drives and helps eliminate noisy belt conditions. Dayco poly rib serpentine belts offer extensive flexibility and longer service life, while handling higher workloads and temperatures.

Product Features:
  • Provides full coverage for today’s light-duty vehicle market, especially vehicles with troublesome drives
  • Engineered to help address noise issues caused by the belt drive 
  • Capable of handling more extreme temperatures and workloads
  • Made in the USA
See More

Dayco – Poly Rib Belt Serpentine Belt; 107.48 Long, 6 Rib Count (Part No.5061075)

Poly Rib Belt Serpentine Belt; 107.48 Long, 6 Rib Count

from

$49.49
Constructed with aramid reinforced EPDM compounds, the Dayco poly-V serpentine belt delivers  more than just OE quality. Developed through extensive laboratory and road testing, the rib profile in this EPDM belt has been engineered to conform to high mile

Product Features:
  • Provides full coverage for today’s light-duty vehicle market, especially vehicles with troublesome drives
  • Engineered to help address noise issues caused by the belt drive 
  • Capable of handling more extreme temperatures and workloads
See More

Driveworks – Poly Rib Belt Serpentine Belt; 47.25 Long, 6 Rib Count (Part No.473K6)

Poly Rib Belt Serpentine Belt; 47.25 Long, 6 Rib Count

from

$21.99
The Driveworks belt is designed to provide better belt-to-pulley contact. The specialized rubber compound incorporates a high temperature polymer formulated to maximize load carrying requirements and belt life. This Driveworks ribbed belt has been constructed and engineered to meet the stringent demands of today’s automotive drive systems. The Driveworks ribbed belt delivers long-lasting dependable belt life.

Product Features:
  • Constructed with heat and ozone resistant EPDM rubber
  • Fiber is added to the rib stock to reinforce the rubber and reduce noise from worn and misaligned pulleys
  • Made with treated polyester cord to reduce belt stretch
See More

Gates – Micro-V« Serpentine Drive Belt (Part No.K060810)

Micro-V« Serpentine Drive Belt

from

$38.99
Import or domestic, car or truck, every vehicle can depend on the superior quality of Gates precision fit Micro-V belts. With advanced technology that matches the OE size, construction and materials, Gates Micro-V ensures optimal vehicle performance.

Product Features:
  • Special belt construction eliminates belt noise, reduces tension loss and solves problem drive applications
  • EPDM rubber constructions resist cracking on the rib surface
  • Meets or exceeds all specifications from the Original Equipment Manufacturer
  • Tensioner Replacement is Recommended (if equipped)
  • Unique form grinding of each individual belt assures precise dimensional control.
  • Meets or exceeds SAE J1459, SAE J2432, and SAE J1596 specifications.
See More

Driveworks – Poly Rib Belt Serpentine Belt; 68.5 Long, 6 Rib Count (Part No.685K6)

Poly Rib Belt Serpentine Belt; 68.5 Long, 6 Rib Count

from

$45.49
The Driveworks belt is designed to provide better belt-to-pulley contact. The specialized rubber compound incorporates a high temperature polymer formulated to maximize load carrying requirements and belt life. This Driveworks ribbed belt has been constructed and engineered to meet the stringent demands of today’s automotive drive systems. The Driveworks ribbed belt delivers long-lasting dependable belt life.

Product Features:
  • Constructed with heat and ozone resistant EPDM rubber
  • Fiber is added to the rib stock to reinforce the rubber and reduce noise from worn and misaligned pulleys
  • Made with treated polyester cord to reduce belt stretch
See More

1989 Ford F53 Belts and Hoses

You count on your 1989 Ford F53 to run right. That means taking care of it with regular maintenance, necessary repairs, and the right parts. Advance Auto Parts can help with all of that thanks to our extensive inventory of trusted Belts and Hoses. With 42 Belts and Hoses ranging in price from $1.49 to $79.99, you’re sure to find everything you need for your 1989 Ford F53.

Brands matter. If you want to shop a specific Belts and Hoses brand, we stock 8 different brands like Litens, Dayco, and Dorman. 1989 Ford F53 Belts and Hoses start as low as $1.49!

One of the best ways to find top quality OEM or aftermarket Belts and Hoses is by asking professionals. Short of that, you can shop with confidence thanks to our 193 extensive product reviews on 1989 Ford F53 Belts and Hoses. Some of the top-rated Belts and Hoses products we carry are Poly Rib Belt Serpentine Belt; 49.5 Long, 6 Rib Count with 3.3 stars and Poly Rib Belt Serpentine Belt; 50.59 Long, 6 Rib Count with 5.0 stars.

Did we mention you can order your Belts and Hoses from our online catalog and have them shipped right to your garage? Or, if you feel like seeing the parts first-hand, search for your nearest Advance Auto Parts location above and pick up in-store when you’re ready. Browse our full Belts and Hoses inventory for your 1989 Ford F53 below to get started!

Top-Rated Belts and Hoses Brands For Your 1989 Ford F53

Trusted Belts and Hoses OEM and aftermarket product brands are what Advance Auto Parts specializes in. The brands we work with are sure to keep that 1989 Ford F53 running right for years to come. In our inventory you’ll find brands like Litens, Dayco, Dorman, and even more.

Popular Dayco Belts and Hoses

You’ll find popular Dayco brand products across Engine Cooling Hoses and Serpentine and V Belts. All are waiting to get your 1989 Ford F53 back on the road. Some of the top-rated Dayco products in these categories are:
Poly Rib Belt Serpentine Belt; 50.59 Long, 6 Rib Count
from $39.99
(11)
Poly Rib Belt Serpentine Belt; 50.59 Long, 6 Rib Count
Serpentine Belts

Top-Rated Dayco Belts and Hoses


If Dayco are what you’re looking for, our inventory holds plenty. We stock Dayco brand Belts and Hoses for your 1989 Ford F53, and some of our most reviewed Dayco parts include:
Poly Rib Belt Serpentine Belt; 49.5 Long, 6 Rib Count
from $22.79
(43)
Poly Rib Belt Serpentine Belt; 49.5 Long, 6 Rib Count
Serpentine Belts

FAQs for 1989 Ford F53 Belts and Hoses

What are the most purchased Belts and Hoses for the 1989 Ford F53?

Out of 42 Belts and Hoses for the 1989 Ford F53, the most popular in our inventory are:
Heater Hose Connector
from $15.49
(26)
Heater Hose Connector
Heater Hose Fittings
Safety Stripe« Standard Straight Heater Hose
from $2.49
This product is not rated
Safety Stripe« Standard Straight Heater Hose
By-Pass Hoses

What are the top-rated 1989 Ford F53 Belts and Hoses?

Top-rated Belts and Hoses for your 1989 Ford F53 based on customer reviews/ratings are:
Poly Rib Belt Serpentine Belt; 49.5 Long, 6 Rib Count
from $24.79
(7)
Poly Rib Belt Serpentine Belt; 49.5 Long, 6 Rib Count
“Belt fit as expected.”
Poly Rib Belt Serpentine Belt; 50.59 Long, 6 Rib Count
from $27.49
(6)
Poly Rib Belt Serpentine Belt; 50.59 Long, 6 Rib Count
“Priced right.”
Heater Hose Connector
from $15.49
(6)
Heater Hose Connector
“Used 2 connectors each when replacing blend door – one 5/8″ and one 3/4″. Had to cut factory hose and attach to connector with a normal hose clamp. ”