1989 Ford F-350 Pickup Jacks, Garage and Equipment Products

At Dee Zee we love taking advantage of wasted space, that is why we are so fond of our Topsider Toolbox. It provides plenty of storage for tools and supplies in a secure box on top of your truck rails- allowing full use of your truck bed for hauling cargo. Constructed of durable Brite-Tread aluminum our Topsiders can be used alone or in combination with many of our Dee Zee boxes and accessories. Our C-Channel leak proof design incorporates a one-piece neoprene rubber bulb seal to defend against outside elements. Drop down doors provide quick access to your tools easily from the side of your truck. Locking stainless steel t-handle latch is easy to operate and offers security and peace of mind.

Product Features:

• Storage For The Top Rail Of The Truck Bed
• Stainless Steel Lockable T Handle Latch
• Drop Down Doors For Easy Access
• Safety Chains To Support The Door
• Made In USA

At Dee Zee we love taking advantage of wasted space, that is why we are so fond of our Topsider Toolbox. It provides plenty of storage for tools and supplies in a secure box on top of your truck rails- allowing full use of your truck bed for hauling cargo. Constructed of durable Brite-Tread aluminum our Topsiders can be used alone or in combination with many of our Dee Zee boxes and accessories. Our C-Channel leak proof design incorporates a one-piece neoprene rubber bulb seal to defend against outside elements. Drop down doors provide quick access to your tools easily from the side of your truck. Locking stainless steel t-handle latch is easy to operate and offers security and peace of mind.

Product Features:

• Storage For The Top Rail Of The Truck Bed
• Lockable Stainless-Steel T-Handle Latch
• Drop Down Doors For Easy Access
• Safety Chains To Support The Door
• Water Resistant C Channel And Bulb Seal To Help Keep The Elements Out

The bigger the project the more tools you need to bring along for the job. You need a capable ToolBox to keep your tools secure and protected for the ride. The Dee Zee Red Label Single Lid Crossover ToolBox with its heavy-duty Brite-Tread aluminum construction is the right ToolBox for the task. Just because mother nature is not cooperating, does not mean you get the day off. You still have to pack your truck, load your tools, and head to the job site. Just another day in the office. it is days like this you will appreciate the weather resistant features of the Dee Zee Red Label Single Lid Crossover ToolBox. Built tough to endure a lifetime of abuse. When you work like we do, it goes without saying you are going to have to get your tools out of the box quite a bit. You want an easy operating and lasting lid construction that will stand up to years of continued use. The Dee Zee Red Label Single Lid Crossover ToolBox features a Crown style lid with a full pan double-V stiffener for superior rigidity. No wobbly lids here folks. You also get Lockable stainless-steel paddle or pull handles, dampened gas shocks, and adjustable strikers to ensure opening and closing the box remains smooth and effortless.

Product Features:

• Self Adjusting Striker Close Securely No Matter How Hard You Push The Lid Down
• Lockable Stainless Steel Paddle Handle Or Black Pull Handle Latches
• Internal Bends Add Superior Body Strength
• Closed Cell Foam Gasket Prevents Water From Getting Inside The Box. Crowned Lid Special Design For Extra Strength
• Crowned Lid With Full Length Hidden Hinge
• Adjustable Lid Strikers For Secure Closing
• Double V-Pan Lid Stiffener Creates Strength And Rigidity
• Front, Back And Bottom Are Bent From A Single Piece Of Aluminum

Dee Zee Red Label Double Lid (Gull Wing) Crossover Boxes are made from Non-Rusting .056 Brite-Tread Aluminum with internal bends for superior rigidity throughout. A closed cell foam gasket defends the inside of the box against outside elements while a crown style lid and double v-pan lid stiffener create strength and rigidity throughout. When you open your toolbox a lot, you want a lid that can handle the abuse. that is why we equip our lids with dampened gas shocks for even opening and adjustable strikers to ensure silky smooth closing. A hidden full-length hinge keeps the lid movement feeling solid.

Product Features:

• Non Rusting Brite Tread Aluminum
• Lockable Stainless Steel Paddle Handle Or Black Pull Handle Latches
• Internal Bends Add Superior Body Strength
• Closed Cell Foam Gasket Helps Resist The Elements From Getting Inside The Box
• Crowned Lid With Full Length Hidden Hinge
• Adjustable Lid Strikers For Secure Closing
• Double V-Pan Lid Stiffener Creates Strength And Rigidity
• Front, Back And Bottom Are Bent From A Single Piece Of Aluminum

Dee Zee Red Label Double Lid (Gull Wing) Crossover Boxes are made from Non-Rusting .056 Brite-Tread Aluminum with internal bends for superior rigidity throughout. A closed cell foam gasket defends the inside of the box against outside elements while a crown style lid and double v-pan lid stiffener create strength and rigidity throughout. When you open your toolbox a lot, you want a lid that can handle the abuse. that is why we equip our lids with dampened gas shocks for even opening and adjustable strikers to ensure silky smooth closing. A hidden full-length hinge keeps the lid movement feeling solid.

Product Features:

• Constructed Of Non-Rusting Brite-Tread Aluminum
• Lockable Stainless Steel Paddle Handle Or Black Pull Handle Latches
• Internal Bends Add Superior Body Strength
• Closed Cell Foam Gasket Helps Resist The Elements From Getting Inside The Box
• Closed Cell Foam Gasket Helps Resist The Elements From Getting Inside The Box
• Dampened Gas Shocks Open At A Steady, Controlled Rate
• Double V Pan Lid Stiffener Creates Strength And Rigidity
• Double V-Pan Lid Stiffener Creates Strength And Rigidity
• Front, Back And Bottom Are Bent From A Single Piece Of Aluminum

Made of a resilient poly material, the Dee Zee Poly Crossover Tool Box combines the functionality of a crossover tool box with the benefits of hardened poly plastic. This tough box can handle all the abuse you can throw at it, without sagging or denting. The center cross support ties the rear and the front together for additional support. The box has a double-wall lid for rigidity and features a molded brite-tread pattern and textured plastic. The overlapping flap on the lid deflects water from entering the box, where the next line of defense awaits with a foam gasket. You can trust your tools, camping gear or even your golf clubs will benefit from these features. The narrow design avoids interference with truck bed wheel wells and this box can be shipped via ground transportation without any large package surcharges Going hunting or camping this weekend and need something overnighted to your doorstep? Boom Available in two lengths to fit midsize trucks (63 Inch) and full-size trucks (70 Inch), this box has a discrete look with its low-profile lid that only sits inches above the bed rail and matches spray in bed liners.

Product Features:

• Rigid Poly Plastic Frame Resists Warping. No Sagging Or Denting
• Overlapping Lid And Foam Gasket Helps Make Box Weather Resistant
• Double-Wall Lid Features Molded Brite-Tread Pattern
• Metal Striker Plate In Lid Features Full Length Locking Rod For Tight Close
• Made In USA

The Crossover toolbox has become a favorite for folks who know how to put in a hard days work. Visit any construction site, park maintenance facility, or hunting camp and you are all but guaranteed to see at least a few. In the world of Crossover Tool Boxes, people have come to expect exceptional quality and ruggedness from the name Dee Zee. Our Hardware Series Crossover Toolbox is no different. Constructed of heavy duty 20-gauge steel with internal bends and double V-Pan lid stiffener to create unmatched strength and rigidity. In layman terms- our toolboxes can sure take a beating. Our Hardware Series Crossover Toolbox is protected by texture black NRT(TM) (No Rust Technology) rust inhibitor powder coat finish to help protect the box and keep it looking great for years. A closed cell foam gasket ensures that weather and road spray Do not damage your tools. Long days in the field can take their tale, but our Hardware Series can take all you have to throw at it. Operation is simple and reliable with Lockable stainless steel paddle handles, dampened gas shocks and self-adjusting strikers.

Product Features:

• NRT(TM) Powder Coat Corrosion Protection
• NRT (TM) Powder Coat Is A Specially Designed To Increase Corrosion Protection
• Dampened Gas Shocks
• Double V-Pan Lid Stiffener Creates Strength And Rigidity
• Internal Bends Add Superior Body Strength
• Full Seam Welds
• Removable Plastic Tool Tray To Keep Smaller Items Organized
• Made In USA

Whether you are looking for a tool box for your short bed pickup truck or simply want to keep as much of your bed space available for cargo as possible- the Dee Zee Special Narrow Crossover Tool Box is a great solution. We build some tough tool boxes, and this one is no exception. Constructed of durable .056 Brite-Tread aluminum with internal bends, single piece front, back and bottom, and a Crowned Lid with full length hidden hinge for superior strength and durability. Operation is smooth and effortless with lockable paddle handles keep people out of your toolbox, adjustable strikers, and dampened gas shocks to ensure even lid movement. A closed cell foam gasket defends against the elements and kicks mother nature in the can.

Product Features:

• Constructed Of Non-Rusting Brite-Tread Aluminum
• Lockable Stainless Steel Paddle Handle Latch
• Protective Gloss Black Powder Coat Finish
• Adjustable Strikers And J-Bolt Mounting Hardware Provided
• Ideal For Today Short Bed Crew Cab Or Any Truck That Does Not Want To Lose Valuable Bed Space
• A Narrow Profile To Save Space In The Truck Bed
• Internal Bends Add Superior Body Strength
• Closed Cell Foam Gasket Helps Resist The Elements From Getting Inside The Box
• Dampened Gas Shocks Open At A Steady, Controlled Rate

At Dee Zee we love taking advantage of wasted space, that is why we are so fond of our Topsider Toolbox. It provides plenty of storage for tools and supplies in a secure box on top of your truck rails- allowing full use of your truck bed for hauling cargo. Constructed of durable Brite-Tread aluminum our Topsiders can be used alone or in combination with many of our Dee Zee boxes and accessories. Our C-Channel leak proof design incorporates a one-piece neoprene rubber bulb seal to defend against outside elements. Drop down doors provide quick access to your tools easily from the side of your truck. Locking stainless steel t-handle latch is easy to operate and offers security and peace of mind.

Product Features:

• Storage For The Top Rail Of The Truck Bed
• Lockable Stainless Steel T Handle Latch
• Drop Down Doors For Easy Access
• Safety Chains To Support The Door
• Water Resistant C-Channel And Bulb Seal To Help Keep The Elements Out

The MotoRad MT-300 cooling system pressure tester is the professionals’ choice when it comes to testing vehicle cooling systems and coolant caps. This tester ensures an automotive cooling system is operating at the correct pressure for optimal performance. Made from high quality materials to ensure life-long durability. Designed to not only test the system, but also coolant caps. Over time, coolant cap seals, springs and valves can wear out causing a loss in system pressure. The MT300 provides quick diagnoses of cooling system issues.

Product Features:

• Includes the most common radiator and cap adapters
• More adapter kits available. See below for info
• As a safety feature there is a pressure release bar that when turned, it will release the pressure in the radiator neck or the Radiator cap for easy release
• Professional quality

X/P bolt EXTRACTOR kit. No Return.

Product Features:

• Cross pin bolt extractor kit
• Easily removes a broken cross pin bolt from a carrier case