1989 Ford E-250 Econoline Catalytic Converters

Complete your exhaust repair with Walker gaskets and flanges. Available in a variety of styles and sizes, they’re designed to work with OE exhaust components and Walker aftermarket replacement parts.

Product Features:

• AVAILABLE IN DIFFERENT SIZES : Offered in a variety of styles and sizes for a quality vehicle repair
• HEAT RESISTANT : Designed to resist heat for long-lasting performance
• PREMIUM MATERIALS : Made from high-quality materials for durability and long life
• ENGINEERING EXPERTISE : Parts are reviewed and validated and approved by Walker engineers through rigorous research and development
• REAL-WORLD TESTED : Parts are tested on-vehicle and validated to ensure optimal performance on the road
• EASIER TO INSTALL : Featuring slotted bolt holes (where applicable) for easy installation, gasket slips into place
• BETTER TOGETHER : Use premium Walker accessories when installing Walker catalytic converters and mufflers for a complete exhaust system upgrade

Complete your exhaust repair with Walker gaskets and flanges. Available in a variety of styles and sizes, they’re designed to work with OE exhaust components and Walker aftermarket replacement parts.

Product Features:

• AVAILABLE IN DIFFERENT SIZES – Offered in a variety of styles and sizes for a quality vehicle repair
• HEAT RESISTANT – Designed to resist heat for long-lasting performance
• PREMIUM MATERIALS – Made from high-quality materials for durability and long life
• ENGINEERING EXPERTISE – Parts are reviewed and validated and approved by Walker engineers through rigorous research and development
• REAL-WORLD TESTED – Parts are tested on-vehicle and validated to ensure optimal performance on the road
• EASIER TO INSTALL – Featuring slotted bolt holes (where applicable) for easy installation, gasket slips into place
• BETTER TOGETHER – Use premium Walker accessories when installing Walker catalytic converters and mufflers for a complete exhaust system upgrade

Keep the check engine light off with MagnaFlow HM Grade Federal/EPA Compliant Direct-Fit Catalytic Converter 93381. With features including free-flowing mandrel-bent tubing and highly corrosion resistant stainless steel construction, easily install this converter yourself using the proper tools, no cutting or welding required. MagnaFlow’s state-of-the-art metrology department uses the latest 3D scanning systems during research and development, so you can be confident that your new part will fit and function like the original equipment. By replicating the OE design, the single laser fusion weld greatly reduces the possibility of a leak, and our compact, low-mass design also allows for greater thermal efficiency. MagnaFlow 93381 includes (1) Torca Clamp and interchanges with OE parts F6UZ-5F250-AJB. This replacement part is designed to meet or exceed Federal emissions requirements set forth by the EPA, complying with legal standards for OBDII Federally registered vehicles with Federal/EPA Emission systems.

Product Features:

• Expertly crafted to replicate OEM-like flow dynamics, maintaining factory performance and fuel efficiency
• High strength 16 gauge 409 stainless steel tubing for exceptional corrosion resistance and maximum service life
• Your trusted source for EPA-compliant catalytic converters, providing assurance of genuine compliance while delivering quality that will last
• Mandrel bent tubing retains OEM-like design and geometry, ensuring smooth exhaust flow for peak fuel economy and engine operation
• Durable 308 stainless steel MIG welds
• Expertly crafted to replicate OEM-like flow dynamics, maintaining factory performance and fuel efficiency

Keep the check engine light off with MagnaFlow OEM Grade Federal/EPA Compliant Direct-Fit Catalytic Converter 51692. With features including free-flowing mandrel-bent tubing and highly corrosion resistant stainless steel construction, easily install this converter yourself using the proper tools, no cutting or welding required. MagnaFlow’s state-of-the-art metrology department uses the latest 3D scanning systems during research and development, so you can be confident that your new part will fit and function like the original equipment. By replicating the OE design, the single laser fusion weld greatly reduces the possibility of a leak, and our compact, low-mass design also allows for greater thermal efficiency. MagnaFlow 51692 interchanges with OE parts 1C2Z-5E212-BA, YC2Z-5E212-AB, YC2Z-5E212-BA. This replacement part is designed to meet or exceed Federal emissions requirements set forth by the EPA, complying with legal standards for OBDII Federally registered vehicles with California or Federal/EPA Emission systems.

Product Features:

• Expertly crafted to replicate OEM-like flow dynamics, maintaining factory performance and fuel efficiency
• Mandrel bent tubing retains OEM-like design and geometry, ensuring smooth exhaust flow for peak fuel economy and engine operation
• High strength 16 gauge 409 stainless steel tubing for exceptional corrosion resistance and maximum service life
• Expertly crafted to replicate OEM-like flow dynamics, maintaining factory performance and fuel efficiency
• Precision stamped collector design for optimal exhaust flow, engine efficiency, and fuel economy
• Simplifies installation with essential gaskets and hardware being included in the box
• Durable 308 stainless steel MIG welds

Keep the check engine light off with MagnaFlow OEM Grade Federal/EPA Compliant Direct-Fit Catalytic Converter 49439. With features including free-flowing mandrel-bent tubing and highly corrosion resistant stainless steel construction, easily install this converter yourself using the proper tools, no cutting or welding required. MagnaFlow’s state-of-the-art metrology department uses the latest 3D scanning systems during research and development, so you can be confident that your new part will fit and function like the original equipment. By replicating the OE design, the single laser fusion weld greatly reduces the possibility of a leak, and our compact, low-mass design also allows for greater thermal efficiency. MagnaFlow 49439 includes (1) Torca Clamp and interchanges with OE parts 4C2Z-5F250-EA, 4C2Z-5F250-EB, 4C2Z-5F250-EC, 5C2Z-5E212-AA, 5C2Z-5E212-BA, 5C2Z-5F250-A, 5C2Z-5F250-B, 5C2Z-5F250-BA, 5C2Z-5F250-EA, 5C2Z-5F250-FA, 6C2Z-5F250-A, 7C2Z-5F250-A, 7C2Z-5F250-BA, 7C2Z-5F250-EA, 7C2Z-5F250-F. This replacement part is designed to meet or exceed Federal emissions requirements set forth by the EPA, complying with legal standards for OBDII Federally registered vehicles with California or Federal/EPA Emission systems.

Product Features:

• High strength 16 gauge 409 stainless steel tubing for exceptional corrosion resistance and maximum service life
• Durable 308 stainless steel MIG welds
• High strength 16 gauge 409 stainless steel tubing for exceptional corrosion resistance and maximum service life
• Simplifies installation with essential gaskets and hardware being included in the box
• Expertly crafted to replicate OEM-like flow dynamics, maintaining factory performance and fuel efficiency
• Torca AccuSeal Exhaust Clamps provide a full 360-degree equally distributed clamping force preventing pipe distortion while creating a complete seal and maintaining serviceability
• Mandrel bent tubing retains OEM-like design and geometry, ensuring smooth exhaust flow for peak fuel economy and engine operation

Product Features:

• EPA COMPLIANT – For use on OBDII vehicles, 1996 and newer. Not legal for sale or use in CA, CO & NY. Legal in ME on EPA Federal Emission Equipped Vehicles only. Consult your state’s aftermarket converter regulations for details.
• KEEPS CHECK ENGINE LIGHT OFF FOR EMISSIONS CODES – OE-style high-technology wash coat and optimal precious metal load delivers required reduction in tailpipe emissions to match vehicle application
• DURABLE – Features stainless-steel body with aluminized pipe and heat shields for durability
• FLEXIBLE SOLUTION – Customizable design features expandable bushings for easy fitment and may require specialized fabrication and welding for installation
• OE-STYLE DESIGN – Features aluminized heat shields when originally equipped, to match OE design, protecting the undercarriage from heat created by the converter
• BUY WITH CONFIDENCE – Backed by Walker’s 25,000-mile/40,000-kilometer emissions and 50,000-mile/80,000-kilometer structural integrity limited warranty. Visit Walkerexhaust.com for details.

Keep the check engine light off with MagnaFlow Standard Grade Federal/EPA Compliant Direct-Fit Catalytic Converter 93316. With features including free-flowing mandrel-bent tubing and highly corrosion resistant stainless steel construction, easily install this converter yourself using the proper tools, no cutting or welding required. MagnaFlow’s state-of-the-art metrology department uses the latest 3D scanning systems during research and development, so you can be confident that your new part will fit and function like the original equipment. By replicating the OE design, the single laser fusion weld greatly reduces the possibility of a leak, and our compact, low-mass design also allows for greater thermal efficiency. This replacement part is designed to meet or exceed Federal emissions requirements set forth by the EPA, complying with legal standards for OBDII Federally registered vehicles with Federal/EPA Emission systems.

Product Features:

• Expertly crafted to replicate OEM-like flow dynamics, maintaining factory performance and fuel efficiency
• Mandrel bent tubing retains OEM-like design and geometry, ensuring smooth exhaust flow for peak fuel economy and engine operation
• High strength 16 gauge 409 stainless steel tubing for exceptional corrosion resistance and maximum service life
• Expertly crafted to replicate OEM-like flow dynamics, maintaining factory performance and fuel efficiency
• Precision stamped collector design for optimal exhaust flow, engine efficiency, and fuel economy
• Simplifies installation with essential gaskets and hardware being included in the box
• Durable 308 stainless steel MIG welds

Designed, tested and validated for assured compliance to meet CARB standards, Walker CalCat Direct-Fit Catalytic Converters are available for OBDII (1996 and newer) and non-OBD (1995 and older) vehicles and delivers a precise OE-style fit.

Product Features:

• CARB COMPLIANT : For use on OBDII vehicles, 1996 and newer and non-OBD 1995 and older. Legal for sale in CA, CO, NY & other states requiring CARB-compliant replacement converters. Consult your state’s aftermarket converter regulations.
• DIRECT-FIT DESIGN : Direct-fit bolt-on replacement solution with OE-style hangers, brackets, routings and heat shields for easy installation that doesn’t require specialized fabrication or welding
• SUPERIOR TECHNOLOGY : Optimal high technology wash coat formulated to deliver superior performance (as compared to EPA-compliant converters)
• CONSISTENT PERFORMANCE : Utilizes a precise OE-style coating process to apply catalyst material to the substrate, providing consistent performance for assured emissions compliance
• STRONG AND DURABLE : Features thick OE-style flanges, hangers and brackets for strength and stainless-steel body with aluminized pipe and heat shields for durability

Keep the check engine light off with MagnaFlow California Grade CARB Compliant Universal Catalytic Converter 445300. The Universal design allows the part to fit a wide array of vehicles, and the stainless steel construction of this catalytic converter is highly resistant to corrosion. The single laser fusion weld greatly reduces the possibility of a leak, and our compact, low-mass design also allows for greater thermal efficiency. This replacement part is designed to meet or exceed California Air Resource Board requirements, and has undergone additional testing to comply with CARB guidelines to allow for legal use in California and CARB restricted states, for the listed vehicles.

Product Features:

• Durable 308 stainless steel MIG welds
• Durable 308 stainless steel MIG welds
• Expertly formulated catalyst blend maximizes efficiency, ensuring optimal emissions control to keep your check engine light off
• Compact, lightweight construction enables installation in confined areas, welding is required
• Your trusted source for CARB-compliant catalytic converters, providing assurance of genuine compliance while delivering quality that will last

Keep the check engine light off with MagnaFlow California Grade CARB Compliant Universal Catalytic Converter 339106. The Universal design allows the part to fit a wide array of vehicles, and the stainless steel construction of this catalytic converter is highly resistant to corrosion. The single laser fusion weld greatly reduces the possibility of a leak, and our compact, low-mass design also allows for greater thermal efficiency. This replacement part is designed to meet or exceed California Air Resource Board requirements, and has undergone additional testing to comply with CARB guidelines to allow for legal use in California and CARB restricted states, for the listed vehicles.

Product Features:

• Compact, lightweight construction enables installation in confined areas, welding is required
• Your trusted source for CARB-compliant catalytic converters, providing assurance of genuine compliance while delivering quality that will last
• Compact, lightweight construction enables installation in confined areas, welding is required
• Durable 308 stainless steel MIG welds
• Expertly formulated catalyst blend maximizes efficiency, ensuring optimal emissions control to keep your check engine light off

Product Features:

• EPA COMPLIANT – For use on OBDII vehicles, 1996 and newer. Not legal for sale or use in CA, CO & NY. Legal in ME on EPA Federal Emission Equipped Vehicles only. Consult your state’s aftermarket converter regulations for details.
• DIRECT-FIT DESIGN – Direct-fit bolt-on replacement solution with OE-style hangers, brackets, routings and heat shields for easy installation that doesn’t require specialized fabrication and welding
• KEEPS CHECK ENGINE LIGHT OFF FOR EMISSIONS CODES – OE-style high-technology wash coat and optimal precious metal load delivers required reduction in tailpipe emissions to match vehicle application
• STRONG AND DURABLE – Features thick OE-style flanges, hangers and brackets for strength and durability
• OE-STYLE DESIGN – Features aluminized heat shields when originally equipped, to match OE design, protecting the undercarriage from heat created by the converter
• BUY WITH CONFIDENCE – Backed by Walker’s 25,000-mile/40,000-kilometer emissions and 50,000-mile/80,000-kilometer structural integrity limited warranty. Visit Walkerexhaust.com for details.

Product Features:

• EPA COMPLIANT – For use on pre-OBDII vehicles, 1995 and older. Not legal for sale or use in CA, CO and NY. Legal in ME on all pre-OBD vehicles only. Consult your state’s aftermarket converter regulations for details.
• NO BREAK IN REQUIRED – Ready to operate with application-specific converter shell design and mat compression, no converter break in required after installation
• DURABLE – Features stainless-steel body with aluminized pipe and heat shields for durability
• FLEXIBLE SOLUTION – Customizable design features expandable bushings for easy fitment and may require specialized fabrication and welding for installation
• OE-STYLE DESIGN – Features aluminized heat shields when originally equipped, to match OE design, protecting the undercarriage from heat created by the converter
• BUY WITH CONFIDENCE – Backed by Walker’s 25,000-mile/40,000-kilometer emissions and 50,000-mile/80,000-kilometer structural integrity limited warranty. Visit Walkerexhaust.com for details.

Product Features:

• EPA COMPLIANT – For use on OBDII vehicles, 1996 and newer. Not legal for sale or use in CA, CO & NY. Legal in ME on EPA Federal Emission Equipped Vehicles only. Consult your state’s aftermarket converter regulations for details.
• KEEPS CHECK ENGINE LIGHT OFF FOR EMISSIONS CODES – OE-style high-technology wash coat and optimal precious metal load delivers required reduction in tailpipe emissions to match vehicle application
• DURABLE – Features stainless-steel body with aluminized pipe and heat shields for durability
• FLEXIBLE SOLUTION – Customizable design features expandable bushings for easy fitment and may require specialized fabrication and welding for installation
• OE-STYLE DESIGN – Features aluminized heat shields when originally equipped, to match OE design, protecting the undercarriage from heat created by the converter
• BUY WITH CONFIDENCE – Backed by Walker’s 25,000-mile/40,000-kilometer emissions and 50,000-mile/80,000-kilometer structural integrity limited warranty. Visit Walkerexhaust.com for details.

Product Features:

• EPA COMPLIANT – For use on OBDII vehicles, 1996 and newer. Not legal for sale or use in CA, CO & NY. Legal in ME on EPA Federal Emission Equipped Vehicles only. Consult your state’s aftermarket converter regulations for details.
• DIRECT-FIT DESIGN – Direct-fit bolt-on replacement solution with OE-style hangers, brackets, routings and heat shields for easy installation that doesn’t require specialized fabrication and welding
• KEEPS CHECK ENGINE LIGHT OFF FOR EMISSIONS CODES – OE-style high-technology wash coat and optimal precious metal load delivers required reduction in tailpipe emissions to match vehicle application
• STRONG AND DURABLE – Features thick OE-style flanges, hangers and brackets for strength and durability
• OE-STYLE DESIGN – Features aluminized heat shields when originally equipped, to match OE design, protecting the undercarriage from heat created by the converter
• BUY WITH CONFIDENCE – Backed by Walker’s 25,000-mile/40,000-kilometer emissions and 50,000-mile/80,000-kilometer structural integrity limited warranty. Visit Walkerexhaust.com for details.

Keep the check engine light off with MagnaFlow OEM Grade Federal/EPA Compliant Universal Catalytic Converter 51007. The Universal design allows the part to fit a wide array of vehicles, and the stainless steel construction of this catalytic converter is highly resistant to corrosion. The single laser fusion welds greatly reduces the possibility of a leak, and our compact, low-mass design also allows for greater thermal efficiency. This replacement part is designed to meet or exceed Federal emissions requirements set forth by the EPA, complying with legal standards for OBDII Federally registered vehicles with Federal/EPA Emission systems.

Product Features:

• Your trusted source for EPA-compliant catalytic converters, providing assurance of genuine compliance while delivering quality that will last
• Your trusted source for EPA-compliant catalytic converters, providing assurance of genuine compliance while delivering quality that will last
• Expertly formulated catalyst blend maximizes efficiency, ensuring optimal emissions control to keep your check engine light off
• Compact, lightweight construction enables installation in confined areas, welding is required
• High strength 16 gauge 409 stainless steel tubing for exceptional corrosion resistance and maximum service life

Designed to comply with EPA standards while delivering premium performance with assured compliance, Walker® Ultra® Direct-Fit Catalytic Converters provide premium performance and are available for import and domestic OBDII (1996 and newer) vehicles.

Product Features:

• EPA COMPLIANT — For use on OBDII vehicles, 1996 and newer. Not legal for sale or use in CA, CO or NY. Legal in ME on EPA Federal Emission Equipped Vehicles only. Consult your state’s aftermarket converter regulations for details.
• DIRECT-FIT DESIGNá–áDirect-fit bolt-on replacement solution with OE-style hangers, brackets, routings and heat shields for easy installationáthatádoesn’t require specialized fabricationáand/or welding
• KEEPS CHECK ENGINE LIGHT OFFáFOR EMISSIONS CODESá–áOE-style high-technologyáwashcoatáand optimaláprecious metal load delivers required reduction in tailpipe emissionsáto match vehicle application
• STRONGáANDáDURABLEá–áFeatures thick OE-style flanges, hangersáandábrackets for strength andádurability
• APPLICATION-ENGINEERED –áFeatures aluminized heat shields when originally equipped, to match OE design, protecting the undercarriage from heat created by the converter
• BUY WITH CONFIDENCE — Backed by Walker’s structural integrity warranty

Designed, tested and validated for assured compliance to meet CARB standards, Walker CalCat Universal Catalytic Converters are available for OBDII (1996 and newer) and non-OBD (1995 and older) vehicles.

Product Features:

• CARB COMPLIANT – For use on OBDII vehicles, 1996 and newer and non-OBD 1995 and older. Legal for sale in CA, CO, NY & other states requiring CARB-compliant replacement converters. Consult your state’s aftermarket converter regulations.
• SUPERIOR TECHNOLOGY – Optimal high technology wash coat formulated to deliver superior performance (as compared to EPA-compliant converters)
• CONSISTENT PERFORMANCE – Utilizes a precise OE-style coating process to apply catalyst material to the substrate, providing consistent performance for assured emissions compliance
• DURABLE – Features stainless-steel body with aluminized pipe and heat shields for durability
• FLEXIBLE SOLUTION – Customizable design features expandable bushings for easy fitment and may require specialized fabrication and welding for installation
• BUY WITH CONFIDENCE – Backed by Walker’s 50,000-mile/80,000-kilometer emissions and structural integrity limited warranty

Product Features:

• EPA COMPLIANT – For use on OBDII vehicles, 1996 and newer. Not legal for sale or use in CA, CO & NY. Legal in ME on EPA Federal Emission Equipped Vehicles only. Consult your state’s aftermarket converter regulations for details.
• DIRECT-FIT DESIGN – Direct-fit bolt-on replacement solution with OE-style hangers, brackets, routings and heat shields for easy installation that doesn’t require specialized fabrication and welding
• KEEPS CHECK ENGINE LIGHT OFF FOR EMISSIONS CODES – OE-style high-technology wash coat and optimal precious metal load delivers required reduction in tailpipe emissions to match vehicle application
• STRONG AND DURABLE – Features thick OE-style flanges, hangers and brackets for strength and durability
• OE-STYLE DESIGN – Features aluminized heat shields when originally equipped, to match OE design, protecting the undercarriage from heat created by the converter
• BUY WITH CONFIDENCE – Backed by Walker’s 25,000-mile/40,000-kilometer emissions and 50,000-mile/80,000-kilometer structural integrity limited warranty. Visit Walkerexhaust.com for details.

Keep the check engine light off with MagnaFlow HM Grade Federal/EPA Compliant Direct-Fit Catalytic Converter 93151. With features including free-flowing mandrel-bent tubing and highly corrosion resistant stainless steel construction, easily install this converter yourself using the proper tools, no cutting or welding required. MagnaFlow’s state-of-the-art metrology department uses the latest 3D scanning systems during research and development, so you can be confident that your new part will fit and function like the original equipment. By replicating the OE design, the single laser fusion weld greatly reduces the possibility of a leak, and our compact, low-mass design also allows for greater thermal efficiency. MagnaFlow 93151 interchanges with OE parts XC2Z-5E212-AC, XC2Z-5E212-BA, YC2Z-5E212-RA. This replacement part is designed to meet or exceed Federal emissions requirements set forth by the EPA, complying with legal standards for OBDII Federally registered vehicles with Federal/EPA Emission systems.

Product Features:

• Your trusted source for EPA-compliant catalytic converters, providing assurance of genuine compliance while delivering quality that will last
• Mandrel bent tubing retains OEM-like design and geometry, ensuring smooth exhaust flow for peak fuel economy and engine operation
• High strength 16 gauge 409 stainless steel tubing for exceptional corrosion resistance and maximum service life
• Expertly crafted to replicate OEM-like flow dynamics, maintaining factory performance and fuel efficiency
• Precision stamped collector design for optimal exhaust flow, engine efficiency, and fuel economy
• Simplifies installation with essential gaskets and hardware being included in the box
• Durable 308 stainless steel MIG welds

Keep the check engine light off with MagnaFlow HM Grade Federal/EPA Compliant Direct-Fit Catalytic Converter 55320. With features including free-flowing mandrel-bent tubing and highly corrosion resistant stainless steel construction, easily install this converter yourself using the proper tools, no cutting or welding required. MagnaFlow’s state-of-the-art metrology department uses the latest 3D scanning systems during research and development, so you can be confident that your new part will fit and function like the original equipment. By replicating the OE design, the single laser fusion weld greatly reduces the possibility of a leak, and our compact, low-mass design also allows for greater thermal efficiency. MagnaFlow 55320 includes (1) Flange Gasket and interchanges with OE parts 1C2Z-5E212-CA, 2C2Z-5E212-DA, 2C2Z-5E212-EA, 2C2Z-5E212-FA, 2C2Z-5E212-HA, 3C2Z-5E212-DA, 3C2Z-5E212-EA, 3C2Z-5E212-FA, 4C2Z-5E212-FA, 4C2Z-5E212-GA, 4C2Z-5E212-MA, 4C2Z-5E212-MB, 4C2Z-5E212-MC, 4C2Z-5F250-EA, 4C2Z-5F250-EB, 4C2Z-5F250-EC, 5C2Z-5E212-AA, 5C2Z-5E212-BA, 5C2Z-5F250-A, 5C2Z-5F250-EA, 5C2Z-5F250-FA, 6C2Z-5F250-A, F7UZ-5E212-DC, F7UZ-5E212-DE, F7UZ-5E212-FC, F7UZ-5E212-FD, F7UZ-5E212-KC, F7UZ-5E212-KD, F7UZ-5E212-PC, F7UZ-5E212-PD, F7UZ-5E212-TB, F7UZ-5E212-TC, F8UZ-5E212-EA, YC2Z-5E212-AA, YC2Z-5E212-CA, YC2Z-5E212-GA, YC2Z-5E212-KA, YC2Z-5E212-LA. This replacement part is designed to meet or exceed Federal emissions requirements set forth by the EPA, complying with legal standards for OBDII Federally registered vehicles with Federal/EPA Emission systems.

Product Features:

• Your trusted source for EPA-compliant catalytic converters, providing assurance of genuine compliance while delivering quality that will last
• Mandrel bent tubing retains OEM-like design and geometry, ensuring smooth exhaust flow for peak fuel economy and engine operation
• High strength 16 gauge 409 stainless steel tubing for exceptional corrosion resistance and maximum service life
• Expertly crafted to replicate OEM-like flow dynamics, maintaining factory performance and fuel efficiency
• Simplifies installation with essential gaskets and hardware being included in the box
• Durable 308 stainless steel MIG welds

Keep the check engine light off with MagnaFlow California Grade CARB Compliant Universal Catalytic Converter 458006. The Universal design allows the part to fit a wide array of vehicles, and the stainless steel construction of this catalytic converter is highly resistant to corrosion. The single laser fusion weld greatly reduces the possibility of a leak, and our compact, low-mass design also allows for greater thermal efficiency. This replacement part is designed to meet or exceed California Air Resource Board requirements, and has undergone additional testing to comply with CARB guidelines to allow for legal use in California and CARB restricted states, for the listed vehicles.

Product Features:

• Expertly formulated catalyst blend maximizes efficiency, ensuring optimal emissions control to keep your check engine light off
• Compact, lightweight construction enables installation in confined areas, welding is required
• Durable 308 stainless steel MIG welds
• Expertly formulated catalyst blend maximizes efficiency, ensuring optimal emissions control to keep your check engine light off
• Your trusted source for CARB-compliant catalytic converters, providing assurance of genuine compliance while delivering quality that will last

Product Features:

• EPA COMPLIANT – For use on OBDII vehicles, 1996 and newer. Not legal for sale or use in CA, CO & NY. Legal in ME on EPA Federal Emission Equipped Vehicles only. Consult your state’s aftermarket converter regulations for details.
• KEEPS CHECK ENGINE LIGHT OFF FOR EMISSIONS CODES – OE-style high-technology wash coat and optimal precious metal load delivers required reduction in tailpipe emissions to match vehicle application
• DURABLE – Features stainless-steel body with aluminized pipe and heat shields for durability
• FLEXIBLE SOLUTION – Customizable design features expandable bushings for easy fitment and may require specialized fabrication and welding for installation
• OE-STYLE DESIGN – Features aluminized heat shields when originally equipped, to match OE design, protecting the undercarriage from heat created by the converter
• BUY WITH CONFIDENCE – Backed by Walker’s 25,000-mile/40,000-kilometer emissions and 50,000-mile/80,000-kilometer structural integrity limited warranty. Visit Walkerexhaust.com for details.

Keep the check engine light off with MagnaFlow California Grade CARB Compliant Universal Catalytic Converter 333106. The Universal design allows the part to fit a wide array of vehicles, and the stainless steel construction of this catalytic converter is highly resistant to corrosion. The single laser fusion weld greatly reduces the possibility of a leak, and our compact, low-mass design also allows for greater thermal efficiency. This replacement part is designed to meet or exceed California Air Resource Board requirements, and has undergone additional testing to comply with CARB guidelines to allow for legal use in California and CARB restricted states, for the listed vehicles.

Product Features:

• Your trusted source for CARB-compliant catalytic converters, providing assurance of genuine compliance while delivering quality that will last
• Your trusted source for CARB-compliant catalytic converters, providing assurance of genuine compliance while delivering quality that will last
• Durable 308 stainless steel MIG welds
• High strength 16 gauge 409 stainless steel tubing for exceptional corrosion resistance and maximum service life
• Compact, lightweight construction enables installation in confined areas, welding is required

Keep the check engine light off with MagnaFlow HM Grade Federal/EPA Compliant Direct-Fit Catalytic Converter 23204. With features including free-flowing mandrel-bent tubing and highly corrosion resistant stainless steel construction, easily install this converter yourself using the proper tools, no cutting or welding required. MagnaFlow’s state-of-the-art metrology department uses the latest 3D scanning systems during research and development, so you can be confident that your new part will fit and function like the original equipment. By replicating the OE design, the single laser fusion weld greatly reduces the possibility of a leak, and our compact, low-mass design also allows for greater thermal efficiency. MagnaFlow 23204 interchanges with OE parts 1C2Z-5E212-CA, F7UZ-5E212-KC, F7UZ-5E212-KD, F7UZ-5E212-TB, F7UZ-5E212-TC, F8UZ-5E212-EA, YC2Z-5E212-AA, YC2Z-5E212-CA. This replacement part is designed to meet or exceed Federal emissions requirements set forth by the EPA, complying with legal standards for OBDII Federally registered vehicles with Federal/EPA Emission systems.

Product Features:

• Your trusted source for EPA-compliant catalytic converters, providing assurance of genuine compliance while delivering quality that will last
• High strength 16 gauge 409 stainless steel tubing for exceptional corrosion resistance and maximum service life
• Expertly crafted to replicate OEM-like flow dynamics, maintaining factory performance and fuel efficiency
• Simplifies installation with essential gaskets and hardware being included in the box
• Durable 308 stainless steel MIG welds

Keep the check engine light off with MagnaFlow HM Grade Federal/EPA Compliant Universal Catalytic Converter 55400. The Universal design allows the part to fit a wide array of vehicles, and the stainless steel construction of this catalytic converter is highly resistant to corrosion. The single laser fusion weld greatly reduces the possibility of a leak, and our compact, low-mass design also allows for greater thermal efficiency. This replacement part is designed to meet or exceed Federal emissions requirements set forth by the EPA, complying with legal standards for OBDII Federally registered vehicles with Federal/EPA Emission systems.

Product Features:

• Compact, lightweight construction enables installation in confined areas, welding is required
• Durable 308 stainless steel MIG welds
• Expertly formulated catalyst blend maximizes efficiency, ensuring optimal emissions control to keep your check engine light off
• Compact, lightweight construction enables installation in confined areas, welding is required
• Your trusted source for EPA-compliant catalytic converters, providing assurance of genuine compliance while delivering quality that will last

Keep the check engine light off with MagnaFlow California Grade CARB Compliant Universal Catalytic Converter 5491306. The Universal design allows the part to fit a wide array of vehicles, and the stainless steel construction of this catalytic converter is highly resistant to corrosion. The single laser fusion weld greatly reduces the possibility of a leak, and our compact, low-mass design also allows for greater thermal efficiency. This replacement part is designed to meet or exceed California Air Resource Board requirements, and has undergone additional testing to comply with CARB guidelines to allow for legal use in California and CARB restricted states, for the listed vehicles.

Product Features:

• Expertly formulated catalyst blend maximizes efficiency, ensuring optimal emissions control to keep your check engine light off
• High strength 16 gauge 409 stainless steel tubing for exceptional corrosion resistance and maximum service life
• Durable 308 stainless steel MIG welds
• Expertly formulated catalyst blend maximizes efficiency, ensuring optimal emissions control to keep your check engine light off
• Your trusted source for CARB-compliant catalytic converters, providing assurance of genuine compliance while delivering quality that will last

Designed, tested and validated for assured compliance to meet CARB standards, Walker CalCat Direct-Fit Catalytic Converters are available for OBDII (1996 and newer) and non-OBD (1995 and older) vehicles and delivers a precise OE-style fit.

Product Features:

• CARB COMPLIANT : For use on OBDII vehicles, 1996 and newer and non-OBD 1995 and older. Legal for sale in CA, CO, NY & other states requiring CARB-compliant replacement converters. Consult your state’s aftermarket converter regulations.
• DIRECT-FIT DESIGN : Direct-fit bolt-on replacement solution with OE-style hangers, brackets, routings and heat shields for easy installation that doesn’t require specialized fabrication or welding
• SUPERIOR TECHNOLOGY : Optimal high technology wash coat formulated to deliver superior performance (as compared to EPA-compliant converters)
• CONSISTENT PERFORMANCE : Utilizes a precise OE-style coating process to apply catalyst material to the substrate, providing consistent performance for assured emissions compliance
• STRONG AND DURABLE : Features thick OE-style flanges, hangers and brackets for strength and stainless-steel body with aluminized pipe and heat shields for durability
• BUY WITH CONFIDENCE : Backed by Walker’s 50,000-mile/80,000-kilometer emissions and structural integrity warranty

Keep the check engine light off with MagnaFlow California Grade CARB Compliant Universal Catalytic Converter 333104. The Universal design allows the part to fit a wide array of vehicles, and the stainless steel construction of this catalytic converter is highly resistant to corrosion. The single laser fusion weld greatly reduces the possibility of a leak, and our compact, low-mass design also allows for greater thermal efficiency. This replacement part is designed to meet or exceed California Air Resource Board requirements, and has undergone additional testing to comply with CARB guidelines to allow for legal use in California and CARB restricted states, for the listed vehicles.

Product Features:

• Your trusted source for CARB-compliant catalytic converters, providing assurance of genuine compliance while delivering quality that will last
• Durable 308 stainless steel MIG welds
• Your trusted source for CARB-compliant catalytic converters, providing assurance of genuine compliance while delivering quality that will last
• High strength 16 gauge 409 stainless steel tubing for exceptional corrosion resistance and maximum service life
• Compact, lightweight construction enables installation in confined areas, welding is required