1989 Ford Country Squire Performance Ignition Products
More 1989 Ford Country Squire Performance Ignition Products
Find your specific 1989 Ford Country Squire original or aftermarket Performance Ignition Products below. Order your parts online and have delivered to your home or pick up in-store at Advance Auto.
Essential 1989 Ford Country Squire Performance Ignition Products
Mallory – Unilite Breakerless Ignition Conversion Kit (Part No.501)
from
$113.99
Put an end to high maintenance point ignition systems by installing a proven Mallory Unilite ignition conversion kit. Features at a glance, improves performance and fuel efficiency, easy to install with simple hand tools, reduced maintenance and is available for all popular 12-volt negative ground domestic cars and trucks.
Product Features:
See More
Product Features:
- Easy Installation
- Improved Fuel Economy
- Reduced Maintenance
- Accurate Timing
- Improved Performance
- Provides A Simple Conversion
- No Moving Parts To Wear Out
Mallory – Distributor Wiring Harness (Part No.29349)
Accel – Spark Plug Wire (Part No.8847)
from
$119.99
Spark Plug Wire
MSD Ignition – Wire Set; Street Fire; V8 Multi-Angle; Socket/HEI Universal (Part No.5551)
from
$67.99
The street fire spark plug wires feature a low resistance conductor that’s wrapped in a sleek and durable black sleeve. The terminals are covered in black boots that protect the conductor from engine heat to ensure spark delivery.
Product Features:
See More
Product Features:
- Helically wound conductor suppresses electro and radio noise
- Kevlar core combination for great strength and durability
- Heavy Duty Terminals For Secure Connection
- 8mm silicone and synthetic jacket resists heat and abrasion
- 500 Ohms/ft. Resistance For Improved Spark Delivery And Power
- Silicone Boots Protect Against High Exhaust Temps
MSD Ignition – Wire Set; Street Fire; Multi-Angle plug; HEI; Universal (Part No.5550)
from
$67.99
The street fire spark plug wires feature a low resistance conductor that’s wrapped in a sleek and durable black sleeve. The terminals are covered in black boots that protect the conductor from engine heat to ensure spark delivery.
Product Features:
See More
Product Features:
- Helically wound conductor suppresses electro and radio noise
- Kevlar core combination for great strength and durability
- Heavy Duty Terminals For Secure Connection
- 8mm silicone and synthetic jacket resists heat and abrasion
- 500 Ohms/ft. Resistance For Improved Spark Delivery And Power
- Silicone Boots Protect Against High Exhaust Temps
Accel – 300+Race, Spark Plug Wire Set, 8.8mm (Part No.7047)
from
$141.99
These ACCEL wire sets are custom tailored for race engines and their builders. The oversize 8.8 mm wire is rated for 600 degrees Fahrenheit and 60kV. Resists heat, chemicals and moisture. High density insulation eliminates arcing. Route over and under headers.
Product Features:
See More
Product Features:
- 150 Ohms Per Foot
- 8.8mm Oversize Silicone Jacket
Accel – Custom Fit Super Stock Spiral Spark Plug Wire Set, 8mm, Blue (Part No.5046B)
from
$85.99
ACCEL Super Stock wire sets are a true performance upgrade replacement for OE types. Efficient delivery of spark energy for a good price. Silicone boots with zinc-plated steel terminals.
Product Features:
See More
Product Features:
- Spiral Core
- Silicone Spark Plug Boots
- 500 Ohms Per Foot Resistance
- 550 Degree Wire Temperature Rating
- Meets Or Exceeds OE Boot Temperature Rating
- Magnetic Suppression
- 500 Ohms Resistance
Accel – Super Stock Coil (Part No.8140)
from
$40.99
ACCEL’s super stock is the high-performance replacement for OE canister style coils. Improves starting, idle, throttle response and top RPM power. Works with OE ignitions and computers. Alkyd tower prevents flash over. Uses OE leads. Comes in chrome.
Product Features:
See More
Product Features:
- 42000 Volts
- Effective To 6500 RPM
- Quicker Starting
- Improved Throttle Response
- Higher RPM Power
- Can Finished In Yellow
Accel – Super Coil Ignition Coil (Part No.140001)
from
$98.99
These coils feature advanced bobbin technology, highly specialized silicone magnetic steel cores, along with optimized winding, resistance and turns ratios to delivery 10-15 percent more energy than the OEM coils. Specialized high temperature epoxy resist
Product Features:
See More
Product Features:
- Oil Filled For Better Cooling
- Optimized Low Resistance
- Silicon Magnetic Steel E-Core
- Higher Energy/Voltage Outputs
- Quicker Starts
- Improved Idle Quality
- Resists Shock And Vibration
- Resists Corrosion
MSD Ignition – Coil; Blaster 2; with Ballast and Hardware (Part No.8203)
from
$82.99
If you are looking to upgrade your stock coil, or want to compliment the performance of your MSD blaster ignition, MSD 5, 6 or 7, the blaster coil line is the right choice. All of the blaster coils are designed for improved spark output. Special 100:1 windings are used to provide maximum build-up of voltage. These windings are held secure and kept cool in an oil filled metal canister. The tower assembly is molded of durable alkyd material due to its high dielectric characteristics while wide spaced brass primary terminals prevent the possibility of spark. There are several versions of the blaster coil available. All of them have the same internal specifications, but have different housings or components. Each blaster coil can be used with a stock ignition, blaster ignition, MSD 5, 6 or 7 ignition control. Most late model vehicles with electronic ignitions do not require a ballast resistor, check your ignition and manufacturers specifications to determine if a ballast is required in your application.
Product Features:
See More
Product Features:
- Improved output coil for stock points or electronic ignitions
- Works w/Blaster Ignition Or MSD 5/6/7 Series
- Ballast Resistor Required If Used w/Stock Points Ignition
- Supplied w/2 Spark Plug Wire Boots/Terminals/Ballast Resistor
- 100:1 Turns Ratio
- Lower Primary Resistance Produces High Voltage Output
- Metal Canister Is Filled w/Premium Grade Oil For Cooling
- CARB E.O. Approved
Hypertech – Power Cap & Rotor Kit for Ford V8 with HEI (Part No.4062)
from
$54.99
Hypertech’s Power Coil is capable of firing a street or slightly modified engine up to 7000 RPMs. Voltage gain over stock can exceed up to 57% more output depending on application. Stock coils usually average around 36,000 volts as compared to Hypertech’s coil kits that average between 45,000 and 55,000. Our coil kits include coil, brass terminals, cap, and rotor. Nylon rotor hold-down screws are included to prevent misfire, and our caps are made of high dielectric material to prevent carbon tracking. Each cap fits the distributor housing tightly to eliminate leakage. Power Coil/Caps/Rotors are NOT legal for sale/use in CA.
Product Features:
See More
Product Features:
- High Output Voltage
- More Spark Energy
- Up To 7000 RPMs
- No Drop Off In Power As RPMs Increase
- Wider Plug Gaps; Brass Terminals
- Constructed w/Burn Through Resistant Materials
- Excellent Dielectric Strength
- Resists Carbon Tracking
MSD Ignition – Coil; Blaster 2; High Performance (Part No.8202)
from
$71.99
If you are looking to upgrade your stock coil, or want to compliment the performance of your MSD blaster ignition, MSD 5, 6 or 7, the blaster coil line is the right choice. All of the blaster coils are designed for improved spark output. Special 100:1 windings are used to provide maximum build-up of voltage. These windings are held secure and kept cool in an oil filled metal canister. The tower assembly is molded of durable alkyd material due to its high dielectric characteristics while wide spaced brass primary terminals prevent the possibility of spark. There are several versions of the blaster coil available. All of them have the same internal specifications, but have different housings or components. Each blaster coil can be used with a stock ignition, blaster ignition, MSD 5, 6 or 7 ignition control. Most late model vehicles with electronic ignitions do not require a ballast resistor, check your ignition and manufacturers specifications to determine if a ballast is required in your application.
Product Features:
See More
Product Features:
- Improved output coil for electronic ignitions
- Works w/Blaster Ignition Or MSD 5/6/7 Series
- Ballast Resistor Required If Used w/Stock Points Ignition
- Alkyd tower w/high dielectric properties lessens carbon tracking
Popular 1989 Ford Country Squire Performance Ignition Products Categories
1989 Ford Country Squire Performance Ignition Products
Maybe you’re in the middle of a full rebuild of that 1989 Ford Country Squire. Maybe you just need a couple of Performance Ignition Products. Either way, Advance Auto Parts has 3 different Performance Ignition Products in our inventory ranging from $25.99 to $67.99. That means you can find the exact parts or products you need to keep that 1989 Ford Country Squire running smoothly.
Performance Ignition Products are only as good as their brand. We stock 3 different brands to make sure you have plenty of trusted parts to choose from for your 1989 Ford Country Squire. Hypertech, MSD Ignition, and Mallory are just some of the brands we stock. Search for brands you know or compare prices and reviews to help you decide!
We know you’ll find the perfect Performance Ignition Products for your 1989 Ford Country Squire, but don’t take our word for it – read our customer ratings and reviews and buy with confidence.
So if you’re in the market for aftermarket Performance Ignition Products to keep your 1989 Ford Country Squire rolling for years to come, look no further. Shop online and have your products shipped direct to your door, or pick up at the nearest Advance Auto Parts location today!
Performance Ignition Products Brands To Make Your 1989 Ford Country Squire Last
Simple repair, complete replacement, or a full rebuild. No matter the job, your 1989 Ford Country Squire demands trusted brand parts and products to keep it running. Many trusted brands of Performance Ignition Products make up Advance Auto Parts’ inventory, and all are ready to help make your Country Squire the best it can be. Be sure to browse some of our top Performance Ignition Products brands and parts.
Popular MSD Ignition Performance Ignition Products
We carry MSD Ignition parts in our stock across Performance Spark Plug Wires categories, plus more. For a 1989 Ford Country Squire, our most popular MSD Ignition Performance Ignition Products include:
from
$67.99
(3)
Wire Set; Street Fire; Multi-Angle plug; HEI; Universal
Performance Spark Plug Wires
FAQs for 1989 Ford Country Squire Performance Ignition Products
What are the most purchased Performance Ignition Products for the 1989 Ford Country Squire?
Out of 3 Performance Ignition Products for the 1989 Ford Country Squire, the most popular in our inventory are:
