from

$3.99

AT SOLENOID SEAL

from

$109.99

This kit allows you to adjust the shift points of your transmission after it is installed in your vehicle. The Governor Recalibration Kit is very useful if you have a vehicle that is very light; has a low rear-end gear ratio.

Product Features:

Adjust Shift Points Of Transmission
Useful For Light Vehicles
For Low Rear End Gear Ratio
Or Useful If It Is Conversion

from

$18.99

Product Features:

Edelbrock Part # 8026 GM Transmission adapter is for use with 2004R, 700R4, 4L60 transmissions.
This kit relocates the pin position on an Edelbrock Carburetor when hooking up to a throttle valve style transmission (700R4, 2004R, 4L60).
The pin location is critical as the TV controls line pressure, shift points, shift firmness, and part throttle downshifts.

from

$2.49

Product Features:

Brand may vary by location

from

$8.99

AT OIL PUMP ORING

from

$7.99

ATP Detent Cable End repair damaged or bent end clips found on 1980-96 General Motors applications.

Product Features:

Saves money by allowing cable repair instead of replacement.
Easy to use

from

$7.99

This clutch pilot bushing is designed to match the fit and function of the original part on specified vehicles. Made of quality materials, it is engineered for reliable performance.

Product Features:

Direct replacement – this clutch pilot bushing matches the fit and function of the factory part on specified years, makes and models
Ideal solution – this bushing is a reliable replacement for an original part that has failed due to fatigue
Durable construction – this part is made from quality materials to ensure reliable performance and long service life
Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience

from

$23.05

High-quality products that meet OE appearance and performance to provide professional technicians and DIYers with a cost-effective solution.

Product Features:

Designed to OE standards for ease of installation
Our parts are 100% tested to verify both mechanical and electrical switching performance
Decades of industry leading research and development focused on meeting the technician’s needs
Robust design and high grade materials meet the stringent demands of today’s service professional
BWD is a global manufacturer of original equipment ignition products, complete quality control is maintained through the manufacturing process from componentry to finished product

from

$39.49

National Oil Seals & Bearings offer a full line of premium oil seals and bearings.

Product Features:

Premium bearing design matches OEM specifications
Precision manufactured using premium-grade steel for outstanding durability and performance
Controlled heat treating process for lasting performance and extended bearing life
Industry leading coverage
Professional technicians know they can depend on National

from

$32.99

AT SPEED SENSOR

from

$414.99

Similar in performance to the Holeshot series, the Tork Master is B&M’s lowest cost torque converter. The Tork Master is an excellent all-around performance street converter. The best ‘value priced’ street converters available.

Product Features:

New Precision Pump Drive Tube
Pressure Tested
Fully Balanced
Needle Thrust Bearing
New Thrust Washer

from

$16.99

Product Features:

Brand may vary by location

from

$1.99

Value-priced seal meets all cataloged application requirements.

Product Features:

Brand may vary by location

from

$529.99

The Magnum Grip Pro Stick shifter delivers rock-solid performance, mixed with clean design cues and compact size. This is why you see so many Pro Stick shifters at the race track. We start off with a heavy duty steel base with a hardened steel gate plate

Product Features:

All One-Handed
NHRA/IHRA Reverse Lockout Meets Requirements
Mount Directly To Floor/Chassis/Or w/Quick Release
Ultimate For Powerglide Applications
Lightweight Brushed Alum. Cover

from

$44.99

National Oil Seals & Bearings offer a full line of premium oil seals and bearings.

Product Features:

Premium bearing design matches OEM specifications
Precision manufactured using premium-grade steel for outstanding durability and performance
Controlled heat treating process for lasting performance and extended bearing life
Industry leading coverage
Professional technicians know they can depend on National

from

$33.99

AUTO TRANS BAND

from

$84.99

When swapping the TH400 transmission into any vehicle, this kit makes installation of the transmission’s kickdown feature a snap. This switch mounts to either a TH700R4, TH200, TH200-R4 or TH350 throttle cable bracket.

Product Features:

Allows High Speed Cruise
Cruise In Overdrive
Prevents Part Throttle Kickdown
Quick Installation

from

$23.99

National Oil Seals & Bearings offer a full line of premium oil seals and bearings.

Product Features:

Premium bearing design matches OEM specifications
Precision manufactured using premium-grade steel for outstanding durability and performance
Crowned raceways and rollers to ensure even load distribution for maximum life
Industry leading coverage
Professional technicians know they can depend on National

from

$8.79

National has built a reputation as one of the most respected names in the industry. We have offered premium sealing solutions for more than 75 years. Our design team keeps pace with the industry and provides advanced solutions for today’s vehicles.

Product Features:

Low swell in hydrocarbon fluids
Design type: spring loaded; multi-lip
Provides good low temperature capability
Temperature range: -40°F to 225°F; -40°C to 107°C
Delivers quality and reliable performance for every type of repair

from

$12.29

National has built a reputation as one of the most respected names in the industry. We have offered premium sealing solutions for more than 75 years. Our design team keeps pace with the industry and provides advanced solutions for today’s vehicles.

Product Features:

Low swell in hydrocarbon fluids
Design type: spring loaded; multi-lip
Provides good low temperature capability
Temperature range: -40°F to 225°F; -40°C to 107°C
Delivers quality and reliable performance for every type of repair

from

$309.99

The B&M converter lockup controller provides dash-mounted control to govern converter lockup at any speed between 30 and 90 mph. These kits eliminate converter lock and unlock cycling and premature unwanted converter lockup.

Product Features:

Dash Mounted Control For Speeds Between 30-90 mph
LED Indicates Locked OR Unlocked

from

$17.49

Permatex’s The Right Stuff 90 Minute Series offers the fastest return to service in a in just 90 minute! This leak-proof, elastomeric “Formed-in-place” material is more reliable and longer lasting than pre-cut gaskets. It is blowout resistant and protects against leaks and seepage caused by vibration and thermal expansion. The Right Stuff 90 Minute Grey is specified for high torque and high vibration applications and is formulated to meet or exceed performance standards for long-term sealability, durability and handling.

Product Features:

Designed to perform under higher torque loads associated with engines having closely spaced bolt patterns
Sensor-safe, non-corrosive, RTV silicone
Protects against leaks caused by vibration and thermal expansion
Meets performance specs of OE silicone gaskets
Quickly returns vehicle to service in just 90 minutes

from

$2453.99

(PDT)Premium Drivetrain Transmissions are remanufactured to original equipment (OEM) demanding specifications by an OEM builder. Each transmission assembly is manufactured with the highest technology equipment, the most intelligent engineering support, and the best practices available in remanufacturing today.

Product Features:

All transmissions are completely disassembled and cleaned. All cases are media blasted. Internal parts are inspected for wear or damage and replaced as required. All bushings are inspected and replaced as required.
100% of friction components are replaced with upgraded heavy duty parts.
Drum assemblies are air checked and side play is checked to assure proper clearance. 100% of seals, o’rings and gaskets are replaced.
100% of solenoids are checked and replaced if they do not pass duty cycle tests. Internal wiring harness are checked and replaced as necessary. Valve bodies are disassembled, cleaned, and measured for wear. Valve body valves and valve bores are inspected and valve bores are machined as required. Completed valve bodies are tested for proper operation prior to dyno testing.
Transmissions are assembled, end plays are set and fasteners are torqued to the required specification.
Torque Converter: 100% of converters are dynamic balanced. 100% of pumps are furnaced brazed. 100% new bearings and o’rings. 100% new springs and rollers in stator. 100% new thrust washers. 100% new friction liners in overdrive lockup converters.
100% of transmissions are dynamometer tested to ensure proper pressures and shift quality throughout the operating range. All upshifts and downshifts are checked against preset parameters. Torque converter stall speed and lockup is verified on the dyno
Product might not be available in all states due to local laws.

from

$148.99

ATHARNESS VSS REPR

from

$11.49

Made of quality materials, this automatic transmission oil cooler line connector matches the fit and function of a damaged original equipment connector to restore leak-free performance between the transmission and the oil cooler.

Product Features:

Quality replacement – this transmission cooler connector matches the fit and function of the original equipment connector
Durable construction – this oil cooler line connector is made of quality materials for a precise fit and leak-free durability
Performance tested – this connector has been rigorously pressure tested to ensure reliable performance
Ideal shop supply – this connector is recommended to have on hand any time service is being performed on the transmission oil cooler line

from

$349.99

Add fluid capacity to your transmission. Extra fluid means more cooling, and more cooling means better efficiency and performance. Add life to your transmission with a B&M Deep Pan!

Product Features:

Additional Oil Capacity
More Cooling Ability
No Dipstick Modification
Some Include Fluid Pickup Extension
Built-In Drain Plugs
Cast Aluminum

from

$27.99

You can forget about the problem of shearing a torque converter bolt after you install these super strong 200,000 PSI gems. They are designed for each specific application and provide the optimum grip. Kits come with hardened parallel ground washers.

Product Features:

Super Strong, Rated At 200,000 PSI
Kits Come With Hardened Parallel Ground Washers
Made In USA
0.590″ Underhead Length
M10 X 1.5 Thread Size
Set of 6

from

$6.99

National has built a reputation as one of the most respected names in the industry. We have offered premium sealing solutions for more than 75 years. Our design team keeps pace with the industry and provides advanced solutions for today’s vehicles.

Product Features: