1989 Chevrolet S10 Drivetrains

Name: Differential Gear Install Kit
Brand: Motive Gear
SKU: GM8.5IKL
Price: 65.99 USD

Below you will find various in-demand Chevrolet Drivetrains, components and accessories for your 1989 S10. Advance Auto Parts has popular S10 parts like Transfer Cases, Drive Shafts and Axles, Universal Joints and more. You’ll also find aftermarket and OEM Drivetrains for other S10 model years including 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003 and more. Select a category of 1989 Chevrolet S10 Drivetrains below and start saving instantly.

Please Select your Vehicle to See Exact Fit Parts

Popular 1989 Chevrolet S10 Drivetrains Categories

Differential Oil

Axle Shaft Universal Joints

4WD Actuator Switches

U-Joints

Drive Shaft and Axles

Transmission Transfer Case Motors

Transfer Case Adapter Gaskets

Transfer Case Gaskets

Rear Differential Cover Gaskets

Transfer Case Control Levers

Drive Shaft Center Supports

Differential Open Unit and Components

Differential Covers

4WD Actuator Cables

Center Support Bearings

U-Joint Strap Kits

Differential Pinion Shaft Lock Bolts

Axle Shaft Bearing Assemblies

Drive and Prop Shaft Assemblies

Differential Bearings

Differential Axle Shafts

Drive Shaft Bearings

Axle Shaft Seals

Drive Shaft Slip Yoke Sleeves

OE CV Boot Kits

Differential Pinion Pilot Bearings

U-Joint Centering Yokes

Differential Cover Bolts

Axle Shaft Bearings

Transfer Case Output Shaft Seals

Differential Carriers

Differential Bearing Kits

Input Shaft Bearings

Front Differential Pinion Bearings

Differential Spider Gear Kits

Differential Rebuild Kits

Differential Carrier Shim Kits

Differential Pinion Seals

Differential Clutch Packs

Rear Axle Shaft Bearings

Differential Mini Spools

Differential Ring and Pinions

Differential End Yokes

Differential Pinion Supports

Spindle Lock Nuts

Drive Shaft Repair Kits

Differential Lock Assemblies

Differential Spools

Differential Carrier Bearings

Differential Lock Springs

Differential Carrier Bushings

Rear Housing Cover Gaskets

Transfer Case Output Shaft Bearings

Differential Pinion Bearing Kits

Axle Shaft Seal Retainers

Drive Shaft Seals

Axle Shaft Lock C-Clips

Complete Differentials

Bearing and Seal Overhaul Kits

Differential Ring Gear Bolts

Bearing Race Drivers

Spindle Lock Nut Thrust Washers

Differential Carrier Bearing Shims

Input Shaft Seals

Spindle Retainers

Differential Crush Sleeves

Differential Side Bearing Spacers

Differential Pinion Shims

Differential Pinion Shaft Nuts

Differential Gear Install Kits

Differential Cross Pins

Mounting Adapter Seals

Differential Side Gear Thrust Washers

Transfer Case Oil Drain Plugs

Differential Pinion Gear Thrust Washers

Oil Pump Housing Seals

Transfer Case Shift Fork Inserts

4WD Indicator Lamp Switches

Axle Shaft Snap Rings

Output Shaft Pilot Bearings

Spindle Washers

Differential Ring and Pinion Kits

Differential Spider and Pinion Gear Kits

Universal Joint Strap Bolts

Differential Clutch Pack Clips

Differential Bearing Adjuster Nut Lock Bolts

Axle Pinion Repair Sleeves

Stub Axle Washers

Differential Shifter Seals

Essential Drivetrains for 1989 Chevrolet S10s

from

$65.99

Product Features:

GM 8.5 LATE INSTALL KIT 99-UP

from

$40.99

Yukon Minimum installation kits are a low cost solution for gear changes in newer vehicles where the bearings can be reused. This kit uses all high quality components to ensure a smooth set up. kit includes a pinion seal, crush sleeve (if applicable), complete shim kit, marking compound and brush.

Product Features:

Fits GM 7.2″ IFS
Included are a pinion seal, crush sleeve, complete shim kit, marking compound and brush.

from

$187.99

Yukon standard open spider gear kit for late 7.625″ GM with 28 spline axles and large and small windows. Yukon uses higher quality materials and better techniques than OEM to ensure a longer lasting spider gear set. All components come with a one year warranty against manufacturing defects.

Product Features:

Spider gear kit
Fits GM 7.625″ open differential with 28 spline axles
Includes two side gears, two pinion gears, cross pin shaft, cross pin bolt and spider gear thrust washers.

from

$14.99

Product Features:

c-clip for GM 7.5″, 7.625″ and 8.0″

from

$889.99

The Yukon Dura Grip provides aggressive yet smooth traction to give you the confidence & performance you need. Get longer life and better traction with the heavy duty Yukon Dura Grip Positraction. The Yukon Dura Grip uses a nodular case and forged 4320 internals for added strength along with composite clutches for high performance and long life. All units are Rebuildable and many offer upgrades to increase aggressiveness for racing applications. Each unit carries a one year warranty against defects.

Product Features:

Fits GM 7.5″ and 7.625″ with 26 spline axles
3.23 ratio and up only
4-spring, clutch style positraction
Internal gears are manufactured using forged 4320 steel and cut to provide stronger teeth
Fully rebuildable
Assembled in the USA

from

$1472.00

Replacing a drive shaft doesn’t have to be complicated. This complete drive shaft assembly is pre-balanced and ready to install with 100% new yokes, tubes, constant velocity (CV) joints and universal joints.

Product Features:

Direct replacement – this drive shaft is made to the original equipment dimensions for dependable fit and performance
100% new – this drive shaft is made from all new components so there’s no core charge or return hassle
Ready to install – this drive shaft arrives pre-balanced to make installation quick and simple
Serviceable construction – non-staked universal joints are designed for future serviceability

from

$8.99

Inner axle retaining snap ring for 7.2″ GM.

Product Features:

Stub axle snap ring
Fits GM 7.2″ IFS

from

$53.99

Product Features:

BUILT TO LAST: Advanced heat treatment process for strength
PREMIUM MATERIALS: Precision manufactured using premium-grade steel for lasting performance and extended bearing life
RELIABLE PERFORMANCE: Element size and quantity are engineered to meet or exceed the load rating of OE bearings
COMPREHENSIVE COVERAGE: Industry-leading coverage for domestic and import applications
RIGOROUS TESTING: Comprehensive testing throughout design and development processes by National engineers for quality you can count on

from

$34.99

This CV joint boot kit contains the parts required to repair the CV joint on specified vehicles without removing the joint itself. Made of quality components, this kit is engineered for reliable performance and durability.

Product Features:

Direct replacement – this CV joint boot kit contains the parts required to repair the CV joint on specified vehicles without removing the joint itself
Ideal solution – this kit is a reliable replacement for original components that have failed due to wear
Durable construction – this kit is made from quality components to ensure reliable performance and a long service life
Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience

from

$6.99

This drive axle shaft lock C-clip is designed to match the fit and function of the original part on specified vehicles. Made of quality materials, it is engineered for reliable performance.

Product Features:

Direct replacement – this drive axle shaft lock C-clip matches the fit and function of the factory part on specified years, makes and models
Ideal solution – this clip is a reliable replacement for an original part that is missing or has failed due to fatigue
Durable construction – this part is made from quality materials to ensure reliable performance and long service life
Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience

from

$469.99

Yukon Ring & Pinion sets give you the confidence of knowing you’re running gears designed for the harshest of conditions. Whether it’s on the street, off-road, or at the track; Yukon ring & pinion sets deliver unrivaled performance & quality. Yukon uses the latest designs and manufacturing technologies to provide a quiet running gear that is strong and easy to set up. All Yukon ring & pinion sets come standard with a one-year warranty.

Product Features:

Fits GM 7.2″ front
7.20″ ring gear
27 spline pinion
10 ring gear bolts
3.42 ratio

from

$42.99

Product Features:

Shim kit
Fits GM 7.5″ and 7.625″ with Eaton positraction

from

$10.79

We develop and produce high-quality roller bearings, spherical bearings, and plain bearings worldwide for a wide range of applications.

Product Features:

High-precision and High-quality components used in all KITs
Coverage of classic and new high-tech solutions for the best system coverage

from

$27.99

Product Features:

CONSISTENT PERFORMANCE: Matched cup and cone components ensure consistent performance
PREMIUM MATERIALS: Precision manufactured using premium-grade steel for outstanding durability and performance
SMOOTH ROTATION: Crowned raceways and rollers for even load distribution
OE-STYLE DESIGN: Engineered to meet OE specifications
COMPREHENSIVE COVERAGE: Industry-leading coverage for domestic and import applications
RIGOROUS TESTING: Comprehensive testing throughout design and development processes by National engineers for quality you can count on

from

$12.99

This spindle nut is designed to match the fit and function of the original part on specified vehicles. Made of quality materials, it is engineered for reliable performance.

Product Features:

Direct replacement – this spindle nut matches the fit and function of the factory part on specified years, makes and models
Ideal solution – this nut is a reliable replacement for an original part that is missing or has failed due to fatigue
Durable construction – this part is made from quality materials to ensure reliable performance and Length service life
Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience

from

$18.99

Pro-King is the leading supplier of transmission and driveline products in the aftermarket.

Product Features:

Meets or exceeds OE specifications

from

$57.99

3 Qt. Penzoil 80W90 conventional gear Oil. W/ bottle of Posi additive.

Product Features:

Includes three quarts of conventional oil and one 4oz bottle of Yukon positraction additive

from

$279.99

Yukon spider gear set for GM 7.5″ & 7.625″ Dura Grip posi, 26 spline. This kit does not include clutches. This kit fits Yukon Dura Grip ONLY.

Product Features:

Spider gear kit
Fits GM gm 7.5″ with 26 spline Dura Grip positraction
Includes two side gears, four pinion gears, cross pin shaft, roll pin and spider gear thrust washers.

from

$8.99

7.5 & 7.625 Standard Open Pinion gear Thrust Washer.

Product Features:

Pinion gear thrust washer for GM 7.5″ and 7.625″
Fits standard open differentials only

from

$39.49

This 4WD actuator cable directly replaces the original equipment part on specific vehicle applications. It is reverse engineered to reliably restore proper functionality.

Product Features:

Direct replacement – this 4WD actuator cable matches the fit and function of the original cable on certain vehicle years, makes and models
Effective fix – installation restores four-wheel drive function interrupted by a failed original cable
Related repair – recommended for replacement when installing a new axle actuator
Trustworthy quality – backed by team of designers and engineers in the United States

from

$17.99

Product Features:

CONSISTENT PERFORMANCE: Matched cup and cone components ensure consistent performance
PREMIUM MATERIALS: Precision manufactured using premium-grade steel for outstanding durability and performance
SMOOTH ROTATION: Crowned raceways and rollers for even load distribution
OE-STYLE DESIGN: Engineered to meet OE specifications
COMPREHENSIVE COVERAGE: Industry-leading coverage for domestic and import applications
RIGOROUS TESTING: Comprehensive testing throughout design and development processes by National engineers for quality you can count on

from

$11.99

7.5 GM cover gasket.

Product Features:

Cover gasket
Fits GM 7.5″ and 7.625″

from

$153.99

Product Features:

Positraction spring kit
Fits GM 7.5″ and 7.625″ Dura Grip
Includes preload plates

from

$9.99

Pinion nut for GM 7.2″ IFS, 7.5″, 7.6″, 7.6″ IFS, 8.0″, 8.25″, 8.5″, 8.6″, 9.25″ IFS, 9.5″ & Oldsmobile Dropouts. 1 1/4″ socket, 7/8″ x 14 thread.

Product Features:

Pinion nut for GM 7.2″, 7.5″, 7.625″, 8.0″, 8.25″ IFS, 8.5″, 8.6″, 9.25″ IFS and 9.5″
7/8″ x 14 thread
1 1/4″ socket

from

$63.99

Yukon 1350 Lifetime Series U/Joint. 3.625″ snap ring span, 1.188″ cap diameter. Outside snap ring.

from

$27.99

8.25″ IFS, 8.5″, 12P, 7.5″ F, 8.8″ F, 8.25″ Chrysler pinion shim kit.

Product Features:

Pinion depth shims for GM 8.25″ IFS, 8.5″, 8.6″, 12 bolt passenger car, Ford 7.5″ and 8.8″, Chrysler 8.25″

from

$8.99

Fel-Pro® gaskets are specifically designed for the repair environment to deliver a reliable seal on even the most troublesome applications. Designed for imperfect sealing surfaces and manufactured with proprietary materials, you can count on Fel-Pro for innovative sealing solutions for the real-world repair environment.

Product Features:

Meets or exceeds all original equipment specifications
Application specific design to ensure a perfect fit
Engineered for the sealing repair environment
Validated for fit, form and function
Unsurpassed quality you can trust

from

$10.99

Meets or exceeds all original equipment specifications
Application specific design to ensure a perfect fit
Unsurpassed quality you can trust
Validated for fit, form and function
Each Fel-Pro gasket, no matter how small, is engineered to exacting standards with proprietary design, engineering and manufacturing processes

Upgrade your 1989 Chevrolet S10 with Top-Quality Drivetrains

When it comes to maintaining or upgrading your 1989 Chevrolet S10, nothing is more important than using high-quality OEM or aftermarket parts that you can trust. Whether you’re repairing damage to your Chevrolet or enhancing its overall performance, Drivetrains are key to keeping your S10 functioning at its best. At Advance Auto Parts, we offer a wide selection of 308 Drivetrains for the 1989 Chevrolet S10, designed to meet your needs without breaking the bank. From Transfer Case replacements to Drive Shafts and Axles upgrades, we’ve got you covered with parts that fit your vehicle perfectly and ensure long-lasting performance.

Affordable Prices and Wide Selection

Shopping for Drivetrains for any vehicle can be a hassle, especially if you’re on a budget. But with Advance Auto Parts, you can find high-quality Drivetrains for your 1989 Chevrolet S10 at great prices. Our Drivetrains inventory for this model ranges from just $2.29 to $2,219.99, with an average price of $248.76. Our 308 Drivetrains in stock come from 21 trusted brands, so you’re sure to find the right part for your 1989 Chevrolet S10 without overspending.

Top Brands and High Customer Satisfaction

Advance Auto Parts takes pride in offering only the best brands in the automotive industry. For your 1989 Chevrolet S10, we stock popular OEM and aftermarket Drivetrains from top names like National, Driveworks, Motive Gear, and more. National Drivetrains start at just $11.99 and boast an impressive 4.3 stars average rating from customers. Driveworks and Motive Gear also bring quality to the table, with Drivetrains available starting at $10.99, and at an average 4.2 stars rating. With 4,042 customer reviews and counting, our 1989 Chevrolet S10 Drivetrains have a strong track record of reliability, ensuring you can trust your purchase.

Explore Related Parts and More

While you’re here, don’t forget to check out other essential categories that go hand in hand with Drivetrain upgrades. Explore related part types like Batteries and Chargers, Oil and Lubricants and more to make sure your 1989 Chevrolet S10 is always ready to roll. We’re committed to providing you with everything you need to keep your S10 in top shape, all in one place. Start shopping confidently below for your 1989 Chevrolet S10!

Best-Selling Transfer Cases for 1989 Chevrolet S10s

Enhance the driving experience in your Chevrolet with 22 quality Transfer Case components, starting at $4.29.

show more show less

from

$20.99

Meets or exceeds all original equipment specifications
Application specific design to ensure a perfect fit
Engineered and manufactured specifically for the repair environment
Unsurpassed quality you can trust
Validated for fit, form, and function

from

$12.99

National has built a reputation as one of the most respected names in the industry. We have offered premium sealing solutions for more than 75 years. Our design team keeps pace with the industry and provides advanced solutions for today’s vehicles.

Product Features:

Design type: spring loaded; multi-lip
Temperature range: -40 Deg. F to 225 Deg. F / -40 Deg. C to 107 Deg. C
Good low temperature capability
Low swell in hydrocarbon fluids
Delivers quality and reliable performance for every type of repair

from

$17.99

Design type: spring loaded; multi-lip
Temperature range: -40 Deg. F to 225 Deg. F / -40 Deg. C to 107 Deg. C
Good low temperature capability
Low swell in hydrocarbon fluids
Delivers quality and reliable performance for every type of repair

from

$30.49

National® has built a reputation as one of the most respected names in the industry. We have offered premium sealing solutions for more than 75 years. Our design team keeps pace with the industry and provides advanced solutions for today’s vehicles.

Product Features:

Designed to repair damaged, grooved or worn shafts
Durable stainless steel construction for corrosion-free sealing surface that surpasses most original shaft specifications
Ideal for a shaft where indications of seal wear, such as tracks or grooves have developed
Ultra-thin construction (0.01/0.25mm wall thickness) allows original seal size to be used with minimal additional lip loading
Easy to install with removable flange and installation tool
Installation tool reduces sleeve distortion and allows for installation without removal from the shaft

from

$7.99

Design type: spring loaded; multi-lip
Temperature range: -40 Deg. F to 225 Deg. F / -40 Deg. C to 107 Deg. C
Good low temperature capability
Low swell in hydrocarbon fluids
Delivers quality and reliable performance for every type of repair

from

$15.99

Design type: spring loaded; multi-lip
Temperature range: -20 Deg. F to 300 Deg. F / -29 Deg. C to 49 Deg. C
Resistance to EP lubricants
Low swell in hydrocarbon fluids
Delivers quality and reliable performance for every type of repair

from

$31.99

This transfer case switch directly replaces the original equipment switch on certain vehicle years, makes and models.

Product Features:

Direct replacement – this 4WD switch matches the fit and function of the original switch on specific vehicle applications
Effective fix – restores proper 4WD operation after original switch degrades and fails
Durable construction – built for reliable longevity, free of defects in materials and craftmanship
Trustworthy quality – backed by team of designers and engineers in the United States

from

$4.99

Product Features:

Design type: spring loaded; single-lip
Temperature range: -40 deg. F to 225 deg. F / -40 deg. C to 107 deg. C
Good low temperature capability
Low swell in hydrocarbon fluids
Delivers quality and reliable performance for every type of repair

from

$13.49

This transfer case oil drain plug is designed to match the fit and function of the original part on specified vehicles. Made of quality materials, it is engineered for reliable performance.

Product Features:

Direct replacement – this transfer case oil drain plug matches the fit and function of the factory part on specified years, makes and models
Ideal solution – this plug is a reliable replacement for an original part that is missing or has failed due to fatigue
Durable construction – this part is made from quality materials to ensure reliable performance and long service life
Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience

from

$9.99

Design type: springless; single-lip
Temperature range: -40 Deg. F to 225 Deg. F / -40 Deg. C to 107 Deg. C
Good low temperature capability
Low swell in hydrocarbon fluids
Delivers quality and reliable performance for every type of repair

from

$25.49

Manufactured with premium materials, National needle bearings are designed and engineered to meet OE specifications.

Product Features:

RIGHT TYPE: Needle bearings are application-specific for the repair occasion, using either caged or full complement designs
PREMIUM MATERIALS: Precision manufactured using high-quality materials for outstanding durability and performance
OE-STYLE DESIGN: Engineered to meet OE specifications
COMPREHENSIVE COVERAGE: Industry-leading coverage for domestic and import applications
RIGOROUS TESTING: Comprehensive testing throughout design and development processes by National engineers for quality you can count on

from

$36.99

TCase Shift Fork

from

$53.99

Product Features:

BUILT TO LAST: Advanced heat treatment process for strength
PREMIUM MATERIALS: Precision manufactured using premium-grade steel for lasting performance and extended bearing life
RELIABLE PERFORMANCE: Element size and quantity are engineered to meet or exceed the load rating of OE bearings
COMPREHENSIVE COVERAGE: Industry-leading coverage for domestic and import applications
RIGOROUS TESTING: Comprehensive testing throughout design and development processes by National engineers for quality you can count on

from

$26.49

Product Features:

RIGHT TYPE: Needle bearings are application-specific for the repair occasion, using either caged or full complement designs
PREMIUM MATERIALS: Precision manufactured using high-quality materials for outstanding durability and performance
OE-STYLE DESIGN: Engineered to meet OE specifications
COMPREHENSIVE COVERAGE: Industry-leading coverage for domestic and import applications
RIGOROUS TESTING: Comprehensive testing throughout design and development processes by National engineers for quality you can count on

from

$176.99

USA Standard Gear produces top quality transfer case small parts for repair and maintenance, including full top-to-bottom overhauls and rebuilds. USA Standard has one of the largest inventories of OEM and aftermarket transfer case component parts in the industry. Our large inventory and experienced tech support are two of the reasons we have been an industry leading supplier for decades. When you chose our transfer case small parts, you know you’re going to get the right part in stock backed by in-house quality assurance testing and expert knowledge.

Product Features:

NP241 Transfer Case (New Process)
Input Shaft
23 spline
5″ Long
Narrow Bear, Late Model Teeth and Big Pocket

from

$132.99

TCaseBrg-SealKit

from

$23.99

Product Features:

Choosing Victor Reinz assures getting OE quality parts in gaskets sets that have the coverage, contents, packaging and electronic cataloging to best meet the needs of the aftermarket.
Dana engineering-approved for fit, form and function
Meets or exceeds OE specifications

from

$11.99

TCaseShiftForkInsert

from

$11.99

Shift Fork Insert

from

$11.29

With advanced load-carrying capacity and compact design, tapered roller bearings are used in wheel bearings, transmissions, differentials, transfer cases and other miscellanous applications. FAG manufacturers over 100 million tapered roller bearings annually.

Product Features:

High-precision and High-quality components used in all KITs
Coverage of classic and new high-tech solutions for the best system coverage

from

$8.99

Product Features:

Brand may vary by location

from

$4.29

ManTransInptShftSeal

Most Popular 1989 Chevrolet S10 Drive Shafts and Axles

Customize your Chevrolet with 33 Drive Shafts and Axles products like Drive Shaft and Axles, Axle Shaft Seals, and Axle Shaft Bearings, all priced under $1,320.99.

show more show less

from

$38.99

You expect a lot from your vehicle, and Spicer Life Series (SPL) universal joints deliver. SPL universal joints consistently outperform competitors, so you can hit the road or trail with confidence. Check out the difference that SPL universal joints can make in your vehicle, and make sure you are getting the longer life, increased bearing capacity and lower maintenance costs that Spicer Life Series (SPL) can provide.

from

$9.99

An imperative replacement part for the proper functioning of the axle shaft and for basic vehicle operation, our Axle Shaft Lock C-Clips are made from quality materials for long-lasting durability.

Product Features:

Direct replacement – this drive axle shaft lock C-clip matches the fit and function of the factory part on specified years, makes and models
Ideal solution – this clip is a reliable replacement for an original part that is missing or has failed due to fatigue
Durable construction – this part is made from quality materials to ensure reliable performance and long service life
Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience

from

$45.99

Designed to repair damaged, grooved or worn shafts
Durable stainless steel construction for corrosion-free sealing surface that surpasses most original shaft specifications
Ideal for a shaft where indications of seal wear, such as tracks or grooves have developed
Ultra-thin construction (0.01/0.25mm wall thickness) allows original seal size to be used with minimal additional lip loading
Easy to install with removable flange and installation tool

from

$24.99

Manufactured with premium-grade steel, National cylindrical bearings are designed and engineered to meet OE specifications.

Product Features:

STRONG AND DURABLE: Controlled heat treatment process for strength and durability
PREMIUM MATERIALS: Precision manufactured using premium-grade steel for durability and performance
OE-STYLE DESIGN: Engineered to meet OE specifications
COMPREHENSIVE COVERAGE: Industry-leading coverage for domestic and import applications
Professional technicians know they can depend on National

from

$17.99

Product Features:

CONSISTENT PERFORMANCE: Matched cup and cone components ensure consistent performance
PREMIUM MATERIALS: Precision manufactured using premium-grade steel for outstanding durability and performance
SMOOTH ROTATION: Crowned raceways and rollers for even load distribution
OE-STYLE DESIGN: Engineered to meet OE specifications
COMPREHENSIVE COVERAGE: Industry-leading coverage for domestic and import applications
RIGOROUS TESTING: Comprehensive testing throughout design and development processes by National engineers for quality you can count on

from

$73.99

Designed to meet or exceed OE quality, premium-quality bearings from National are manufactured to exacting standards to deliver lasting performance and extended bearing life.

Product Features:

BUILT TO LAST – Advanced heat treatment process for strength
PREMIUM MATERIALS – Precision manufactured using premium-grade steel for lasting performance and extended bearing life
RELIABLE PERFORMANCE – Element size and quantity are engineered to meet or exceed the load rating of OE bearings
COMPREHENSIVE COVERAGE – Industry-leading coverage for domestic and import applications
RIGOROUS TESTING – Comprehensive testing throughout design and development processes by National engineers for quality you can count on

from

$156.99

All CARQUEST axles have a new zinc dichromate plated nut or attaching hardware. CV joint grease has a high moly content. The boot bands are made from stainless steel, and the boots are manufactured to resist wear and damage due to extreme high and low temperatures.High moly CV joint grease with stainless-steel boot bands

from

$18.29

Value-priced bearing meets all cataloged application requirements.

Product Features:

Brand may vary by location

from

$44.99

Designed to meet or exceed OE quality, premium-quality bearings from National are manufactured to exacting standards to deliver lasting performance and extended bearing life.

Product Features:

BUILT TO LAST – Advanced heat treatment process for strength
PREMIUM MATERIALS – Precision manufactured using premium-grade steel for lasting performance and extended bearing life
RELIABLE PERFORMANCE – Element size and quantity are engineered to meet or exceed the load rating of OE bearings
COMPREHENSIVE COVERAGE – Industry-leading coverage for domestic and import applications
RIGOROUS TESTING – Comprehensive testing throughout design and development processes by National engineers for quality you can count on

from

$21.99

Anchor 6056 Center support bearings support a driveshaft between transmission and differential. This mount relieves stress on driveline components. Each part is engineered and designed to OE Standards. Natural and SBR rubber provide maximum life and performance. Steel fasteners are heat treated grade 5 bolts. A special bonding agent is used to ensure a rubber to metal bond. Rubber material is mixed to specific Durometer, hardness.

Product Features:

MAXIMUM VIBRATION DAMPENING: Rubber cushion is made of high grade rubber that ensures maximum dampening of vibration and the ability to absorb over loads.
HEAVY GAUGE STEEL FRAME: The housing frame is made from heavy gauge steel with durability that extends the service life.
READY TO INSTALL: Most center supports include a sealed bearing and dust shield and are ready to install.
For Years: 1955-2018
Weight approx: 3 Lbs
BEARING ID / BORE: 1.3780 In. / 35 mm
CENTERLINE: 2.28 In. / 58 mm
Mount Width: 6.62 In. / 168 mm
Style: Round Frame
Complete Mount

from

$19.99

Value-priced bearing meets all cataloged application requirements.

from

$42.99

Yukon axle bearing & seal kits are specially designed for each application & use all high quality bearings & seals. R1563TAV axle bearing and seal kit, TorringtonBrand, 2.250″ OD, 1.400″ ID. This axle bearing & seal kit services one side only.

Product Features:

Includes axle bearing and seal
Services one side
Torrington Brand
2.250″ O.D.
1.400″ I.D.

from

$18.99

Product Features:

RIGHT TYPE: Needle bearings are application-specific for the repair occasion, using either caged or full complement designs
PREMIUM MATERIALS: Precision manufactured using high-quality materials for outstanding durability and performance
OE-STYLE DESIGN: Engineered to meet OE specifications
COMPREHENSIVE COVERAGE: Industry-leading coverage for domestic and import applications
RIGOROUS TESTING: Comprehensive testing throughout design and development processes by National engineers for quality you can count on

from

$14.99

Product Features:

c-clip for GM 7.5″, 7.625″ and 8.0″

from

$59.99

This drive shaft repair kit is designed to match the original hardware required to repair the drive shaft on specified vehicles. Made of quality components, this kit is engineered for reliable performance and durability.

Product Features:

Direct replacement – this drive shaft repair kit is designed to match the original hardware required to repair the drive shaft on specified vehicle
Ideal solution – this kit is a reliable replacement for original components that have failed due to fatigue
Durable construction – this kit is made from quality components to ensure reliable performance and a long service life
Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience

from

$7.99

Product Features:

Brand may vary by location

from

$8.99

Inner axle retaining snap ring for 7.2″ GM.

Product Features:

Stub axle snap ring
Fits GM 7.2″ IFS

from

$42.99

Product Features:

Brand may vary by location

from

$30.49

Designed to repair damaged, grooved or worn shafts
Durable stainless steel construction for corrosion-free sealing surface that surpasses most original shaft specifications
Ideal for a shaft where indications of seal wear, such as tracks or grooves have developed
Ultra-thin construction (0.01/0.25mm wall thickness) allows original seal size to be used with minimal additional lip loading
Easy to install with removable flange and installation tool

from

$35.99

Product Features:

BUILT TO LAST: Advanced heat treatment process for strength
PREMIUM MATERIALS: Precision manufactured using premium-grade steel for lasting performance and extended bearing life
RELIABLE PERFORMANCE: Element size and quantity are engineered to meet or exceed the load rating of OE bearings
COMPREHENSIVE COVERAGE: Industry-leading coverage for domestic and import applications
RIGOROUS TESTING: Comprehensive testing throughout design and development processes by National engineers for quality you can count on

from

$1320.99

Direct replacement – this drive shaft is made to the original equipment dimensions for dependable fit and performance
100% new – this drive shaft is made from all new components so there’s no core charge or return hassle
Ready to install – this drive shaft arrives pre-balanced to make installation quick and simple
Serviceable construction – non-staked universal joints are designed for future serviceability

from

$862.99

Direct replacement – this drive shaft is made to the original equipment dimensions for dependable fit and performance
100% new – this drive shaft is made from all new components so there’s no core charge or return hassle
Ready to install – this drive shaft arrives pre-balanced to make installation quick and simple
Serviceable construction – non-staked universal joints are designed for future serviceability

from

$634.99

Direct replacement – this drive shaft is made to the original equipment dimensions for dependable fit and performance
100% new – this drive shaft is made from all new components so there’s no core charge or return hassle
Ready to install – this drive shaft arrives pre-balanced to make installation quick and simple
Serviceable construction – non-staked universal joints are designed for future serviceability

from

$626.99

Direct replacement – this drive shaft is made to the original equipment dimensions for dependable fit and performance
100% new – this drive shaft is made from all new components so there’s no core charge or return hassle
Ready to install – this drive shaft arrives pre-balanced to make installation quick and simple
Serviceable construction – non-staked universal joints are designed for future serviceability

Top Picks for 1989 Chevrolet S10 Universal Joints

Upgrade Chevrolet S10s with top-quality Universal Joints parts, including 31 OEM and aftermarket selections for your 1989 model.

show more show less

from

$31.99

When you see the Spicer name, you know you are buying the highest quality product available. Spicer universal joints are no exception. Dana manufactures a full line of Spicer universal joints that are engineered to ensure longer life for vehicles in a wide variety of applications, from light vehicle to commercial and off-highway.

Product Features:

OE engineering and field tested experience is why the Spicer brand is the most trusted in the industry.
Forged with high-quality steel, these u-joints are heat treated and case-hardened with precision to specific levels, ensuring optimal strength and durability.
The process of precision grinding the seal and bearing surfaces helps to improve the life of the seal and bearing.
Zerk allows for lubricating at regular intervals to help extend the life of the part.

from

$15.99

Driveworks Universal Joints are designed to meet or exceed OE fit, form, and function. These universal joints are set to provide superior quality and easy installation. Driveworks Universal Joints are constructed from quality materials for extended durability. Driveworks Universal Joints are pre-lubricated with premium grease to provide a longer service life. The grease fittings are pre-installed to allow for easy maintenance (where applicable).

Product Features:

The cross is hot forged for the higher torque and horsepower
The bearing cups are made by cold forging, having higher strength and better rigidity
Bearing cups allow 360 lubricant distribution to bearing surfaces, and are precision-ground for maximum load-carrying capabilities
Lubrication grooves are designed to ensure grease penetration to entire journal and needle bearings
Grease fitting in the cross allows for easy maintenance and the flexible use of the whole assembly
Snap rings are held to strict tolerances to ensure proper cup position and retention
Nitrile rubber seals to optimize grease retention and reduce contamination

from

$42.99

Backed by superior materials and rigorous testing, MOOG Premium universal joints deliver reliable performance you can count on. MOOG problem-solving innovations ensure fast, hassle-free installation.

Product Features:

COMPREHENSIVE COVERAGE – Available for foreign and domestic nameplates
GREASEABLE DESIGN – Greaseable u-joints allow for new grease to flush out contaminants and moisture
KEEPS DIRT OUT – Nitrile rubber grease seals use a compressed double lip design for effective protection against contaminants
RIGOROUS TESTING – Comprehensive testing throughout design and development processes by MOOG engineers for quality you can count on
STRONG AND DURABLE – Bearing cups are cold-forged, case-hardened and precision ground while steel cross is forged and carburized heat treated for strength and durability
Cross forging shape and flash provide easier installation and high strength

from

$35.99

Product Features:

BUILT TO LAST – Rugged design specifically engineered for fleets, off-highway and commercial vehicles
STRONG AND DURABLE – Bearing cups are cold-formed, case-hardened and precision ground for strength and durability
KEEPS DIRT OUT – Abrasion-resistant nitrile seals provide ideal grease retention and protection from under-vehicle contaminants
GREASEABLE DESIGN – Drilled and tapped grease fitting holes for easy servicing and cross trunnions with large grease reservoirs with radial grease channels for grease distribution
INHIBITS PREMATURE WEAR – Cross trunnions ground to a 15-25 RMS finish for a smooth surface free of microscopic grooves that can cause premature wear
RELIABLE PERFORMANCE – Internal anti-drainback valve integrated into thrust washer controls lubrication flow and prevents dry startup
RIGOROUS TESTING – Comprehensive testing throughout design and development processes by MOOG engineers for quality you can count on

from

$15.99

The cross is hot forged for the higher torque and horsepower
The bearing cups are made by cold forging to provide higher strength and better rigidity
Bearing cups allow 360 lubricant distribution to bearing surfaces, and are precision-ground for maximum load-carrying capabilities
Lubrication grooves are designed to ensure grease penetration to entire journal and needle bearings
Grease fitting allows for easy maintenance and the flexible use of the entire assembly
Snap rings are held to strict tolerances to ensure proper cup position and retention
Nitrile rubber seals are applied to optimize grease retention and reduce contamination

from

$25.99

By constantly introducing design enhancements that extend product life and simplify installation and replacement, MOOG has earned its reputation as the chassis industry’s Problem Solver.

Product Features:

For U-Joints 355, 372 & 534G
Contains two 1.81″ bolt center clamps and four 5/16-24 x 1-5/16″ cap screws

from

$29.49

Product Features:

BUILT TO LAST – Rugged design specifically engineered for applications with higher torque and horsepower
COMPREHENSIVE COVERAGE – Available for foreign and domestic nameplates
CORROSION PROTECTION – Exclusive MICRO SHIELD coating protects against rust and corrosion
KEEPS DIRT OUT – Abrasion-resistant nitrile seals provide ideal grease retention and protection from under-vehicle contaminants
RIGOROUS TESTING – Comprehensive testing throughout design and development processes by MOOG engineers for quality you can count on
STRONG AND DURABLE – Bearing cups are cold-forged, case-hardened and precision ground while steel cross is forged and carburized heat treated for strength and durability

from

$33.99

Product Features:

BUILT TO LAST – Rugged design specifically engineered for applications with higher torque and horsepower
COMPREHENSIVE COVERAGE – Available for foreign and domestic nameplates
CORROSION PROTECTION – Exclusive MICRO SHIELD coating protects against rust and corrosion
KEEPS DIRT OUT – Abrasion-resistant nitrile seals provide ideal grease retention and protection from under-vehicle contaminants
RIGOROUS TESTING – Comprehensive testing throughout design and development processes by MOOG engineers for quality you can count on
STRONG AND DURABLE – Bearing cups are cold-forged, case-hardened and precision ground while steel cross is forged and carburized heat treated for strength and durability

from

$41.49

Backed by superior materials and rigorous testing, MOOG Super Strength universal joints deliver reliable performance you can count on. MOOG problem-solving innovations ensure fast, hassle-free installation.

Product Features:

BUILT TO LAST – Rugged design specifically engineered for applications with higher torque and horsepower
COMPREHENSIVE COVERAGE – Available for foreign and domestic nameplates
CORROSION PROTECTION – Exclusive MICRO SHIELD coating protects against rust and corrosion
GREASEABLE DESIGN – Bearing cups feature a radial design to allow 360 Degrees lubricant distribution to all bearing surfaces
KEEPS DIRT OUT – Abrasion-resistant nitrile seals provide ideal grease retention and protection from under-vehicle contaminants
RIGOROUS TESTING – Comprehensive testing throughout design and development processes by MOOG engineers for quality you can count on
STRONG AND DURABLE – Bearing cups are cold-forged, case-hardened and precision ground while steel cross is forged and carburized heat treated for strength and durability

from

$48.99

from

$15.99

The cross is hot forged for the higher torque and horsepower
The bearing cups are made by cold forging, having higher strength and better rigidity
Bearing cups allow 360 lubricant distribution to bearing surfaces, and are precision-ground for maximum load-carrying capabilities
Lubrication grooves are designed to ensure grease penetration to entire journal and needle bearings
Grease fitting in the cross allows for easy maintenance and the flexible use of the whole assembly
Snap rings are held to strict tolerances to ensure proper cup position and retention
Nitrile rubber seals to optimize grease retention and reduce contamination

from

$34.49

BUILT TO LAST – Rugged design specifically engineered for applications with higher torque and horsepower
COMPREHENSIVE COVERAGE – Available for foreign and domestic nameplates
CORROSION PROTECTION – Exclusive MICRO SHIELD coating protects against rust and corrosion
GREASEABLE DESIGN – Bearing cups feature a radial design to allow 360 Degrees lubricant distribution to all bearing surfaces
KEEPS DIRT OUT – Abrasion-resistant nitrile seals provide ideal grease retention and protection from under-vehicle contaminants
RIGOROUS TESTING – Comprehensive testing throughout design and development processes by MOOG engineers for quality you can count on
STRONG AND DURABLE – Bearing cups are cold-forged, case-hardened and precision ground while steel cross is forged and carburized heat treated for strength and durability

from

$36.99

OE engineering and field tested experience is why the Spicer brand is the most trusted in the industry.
Forged with high-quality steel, these u-joints are heat treated and case-hardened with precision to specific levels, ensuring optimal strength and durability.
The process of precision grinding the seal and bearing surfaces helps to improve the life of the seal and bearing.
Zerk allows for lubricating at regular intervals to help extend the life of the part.

from

$15.99

The cross is hot forged for the higher torque and horsepower
The bearing cups are made by cold forging, having higher strength and better rigidity
Bearig cups allow 360 lubricant distribution to bearing surfaces, and are precision-ground for maximum load-carrying capabilities
Lubrication grooves designed to ensure grease penetration to entire journal and needle bearings
Grease fitting in the cross allows for easy maintenance and the flexible use of the whole assembly
Snap rings are held to strict tolerances to ensure proper cup position and retention
Nitrile rubber seals to optimize grease retention and reduce contamination

from

$24.99

Product Features:

COMPREHENSIVE COVERAGE – Available for foreign and domestic nameplates
GREASABLE DESIGN – Greasable u-joints allow for new grease to flush out contaminants and moisture
KEEPS DIRT OUT – Nitrile rubber grease seals use a compressed double lip design for effective protection against contaminants
RIGOROUS TESTING – Comprehensive testing throughout design and development processes by MOOG engineers for quality you can count on
STRONG AND DURABLE – Bearing cups are cold-forged, case-hardened and precision ground while steel cross is forged and carburized heat treated for strength and durability
Cross forging shape and flash provide easier installation and high strength

from

$4.59

Universal Joint

from

$13.99

This universal joint strap kit is designed to match the original components required to repair and resecure universal joints on specified vehicles. Made of quality components, this kit is engineered for reliable performance and durability.

Product Features:

Direct replacement – this universal joint strap kit is designed to match the original components required to repair and resecure universal joints on specified vehicles
Ideal solution – this kit is a reliable replacement for original components that are missing or have failed due to fatigue
Durable construction – this kit is made from quality components to ensure reliable performance and a long service life
Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience

from

$11.99

For U-Joints 354, 368, 369, 445 & 455
Contains two 1.59″ bolt center clamps and four 5/16-24 x 1-5/16″ cap screws

from

$7.49

Direct replacement – this universal joint strap kit is designed to match the original components required to repair and resecure universal joints on specified vehicles
Ideal solution – this kit is a reliable replacement for original components that are missing or have failed due to fatigue
Durable construction – this kit is made from quality components to ensure reliable performance and a long service life
Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience

from

$78.99

Yukon 1350 to 1410 conversion u/joint.

from

$32.99

BUILT TO LAST – Rugged design specifically engineered for applications with higher torque and horsepower
COMPREHENSIVE COVERAGE – Available for foreign and domestic nameplates
CORROSION PROTECTION – Exclusive MICRO SHIELD coating protects against rust and corrosion
GREASEABLE DESIGN – Bearing cups feature a radial design to allow 360 Degrees lubricant distribution to all bearing surfaces
KEEPS DIRT OUT – Abrasion-resistant nitrile seals provide ideal grease retention and protection from under-vehicle contaminants
RIGOROUS TESTING – Comprehensive testing throughout design and development processes by MOOG engineers for quality you can count on
STRONG AND DURABLE – Bearing cups are cold-forged, case-hardened and precision ground while steel cross is forged and carburized heat treated for strength and durability

from

$109.99

Yukon 1310 to Mechanics 3R adapter U/Joint.

from

$63.99

Yukon 1350 Lifetime Series U/Joint. 3.625″ snap ring span, 1.188″ cap diameter. Outside snap ring.

from

$51.99

Yukon 1350 U/Joint with zerk fitting. 3.625″ snap ring span, 1.118″ cap diameter. Outside snap ring.

In-Demand Differentials for 1989 Chevrolet S10s

Select from 208 premium Differentials parts for your 1989 Chevrolet S10, with prices ranging from $2.49 to $2,219.99.

show more show less

from

$35.99

Valvoline MaxLife Multi-Vehicle ATF is a full-synthetic formulation with advanced additives to prevent the major causes of transmission breakdown and help extend transmission life. Developed to help prevent leaks, maximize transmission performance, reduce transmission wear, and maintain smooth shifting longer than conventional fluids. It is suitable for use in a broad range of ATF applications including most Ford, GM, Toyota, Honda, Nissan, Hyundai, BMW, Mercedes, Volvo, VW & Audi. Recommended for use in the following applications: GM DEXRON-II, DEXRON-III, DEXRON-VI, Ford MERCON LV, Toyota/Lexus Type T, T-II, T-IV, WS, Honda/Acura, ATF-Z1, Nissan/Infiniti Matic-D, Matic-J, Matric-K, Matic-S, Hyundai/Kia SP-II, SP-III, SP-IV, SPH-IV, BMW 7045E, ETL 8072B, LA2634, LT71141, Allison C-4, Mercedes Benz NAG-1, Volvo 1161521, 1161540, 97340, 1273.41, and VW/Audi G-052-025-A2, G-052-162-A1. For CVT applications Valvoline recommends Valvoline Full Synthetic CVT Fluid.

Product Features:

Formulated with full-synthetic base oils and long life friction modifiers to help improve smooth shifting, eliminate slippage and shudder, prevent clutch wear and improve drivability longer than conventional fluids
High-performance seal conditioners maintain and preserve the elasticity of seals to help prevent leaks in high mileage transmissions
Developed with anti-wear technology to help improve transmission durability
Engineered with a proprietary blend of base oils and advanced additives to provide better oil flow at low temperatures and greater film protection at higher temperatures

from

$12.49

Designed for certain manual transaxles and manual transmissions used by General Motors or Chrysler, Pennzoil Synchromesh fluid provides excellent oxidation stability and low-temperature performance. It’s formulated with high-quality paraffinic base stocks, a fluidity modifier, multifunctional performance additives, corrosion inhibitors, a foam suppressor, and a shear stable viscosity index improver additive. Pennzoil Synchromesh also offers excellent synchronizer performance and compatibility with yellow metals (such as bronze, brass, and copper components found in manual transaxles and transmissions). This product will satisfactorily lubricate General Motors or Chrysler manual transaxles and transmissions from -40 degrees C to +150 degrees C.

Product Features:

Transmission fluid designed for certain manual transaxles and manual transmissions used by General Motors or Chrysler
Excellent low-temperature performance and oxidation stability
Excellent synchronizer performance
Excellent compatibility with yellow metals such as bronze, brass, and copper components found in manual transaxles and transmissions
Formulated with high-quality paraffinic base stocks, a fluidity modifier, and multifunctional performance additives
Meets GM Specification 998564; suitable for use in GM manual transaxles and transmissions requiring GM Part No. 12345349 or 12345577
Meets Chrysler specification MS-9224; suitable for use in Chrysler transaxles and transmissions requiring Part No. 0487446
For a full list of equipment approvals and recommendations, please consult your local Shell Technical Help Desk and always consult your owner’s manual

from

$8.99

Meets or exceeds all original equipment specifications
Application specific design to ensure a perfect fit
Engineered for the sealing repair environment
Validated for fit, form and function
Unsurpassed quality you can trust

from

$16.99

National Oil Seals & Bearings offer a full line of premium oil seals and bearings.

Product Features:

CONSISTENT PERFORMANCE — Matched cup and cone components ensure consistent performance
PREMIUM MATERIALS — Precision manufactured using premium-grade steel for outstanding durability and performance
SMOOTH ROTATION — Crowned raceways and rollers for even load distribution
OE-STYLE DESIGN — Engineered to meet OE specifications
COMPREHENSIVE COVERAGE — Industry-leading coverage for domestic and import applications
RIGOROUS TESTING — Comprehensive testing throughout design and development processes by National engineers for quality you can count on

from

$11.99

Manufactured with premium-grade steel, National taper bearing cups feature crowned raceways to ensure even load distribution.

Product Features:

PREMIUM MATERIALS – Precision manufactured using premium-grade steel for outstanding durability and performance
SMOOTH ROTATION – Crowned raceways for even load distribution
OE-STYLE DESIGN – Engineered to meet OE specifications
COMPREHENSIVE COVERAGE – Industry-leading coverage for domestic and import applications
RIGOROUS TESTING – Comprehensive testing throughout design and development processes by National engineers for quality you can count on

from

$10.99

Value-priced bearing meets all cataloged application requirements.

Product Features:

Brand may vary by location

from

$131.99

Product Features:

INTERNAL KIT-GM 7.6″ W/28 SPLINE

from

$151.99

The National bearing & seal kit includes all the components required to complete the repair.

Product Features:

COMPLETE SOLUTION – Includes everything needed to complete the repair
STRONG AND DURABLE – Controlled heat treatment process for strength and durability
COMPREHENSIVE COVERAGE – Industry-leading coverage for domestic and import applications
RIGOROUS TESTING – Comprehensive testing throughout design and development processes by National engineers for quality you can count on
Professional technicians know they can depend on National

from

$43.99

Designed to repair damaged, grooved or worn shafts
Durable stainless steel construction for corrosion-free sealing surface that surpasses most original shaft specifications
Ideal for a shaft where indications of seal wear, such as tracks or grooves have developed
Ultra-thin construction (0.01/0.25mm wall thickness) allows original seal size to be used with minimal additional lip loading
Easy to install with removable flange and installation tool

from

$121.99

Product Features:

GM10 BOLT 8.5″ 30 SPL INTERNAL KIT 1988-1999 (OPEN)

from

$138.99

Motive Gear Differential Bearing Kits Include Front & Rear Pinion Bearing, Pinion Seal, Carrier Bearings, Pilot Bearing Where Applicable, Gear Marking Compound, Crush Sleeve, Pinion Nut, Brush, Thread Locking Compound And Cover Gasket Or Rtv

Product Features:

GM 7.5 MASTER KIT BRG & SEAL ’82-98

from

$17.99

Product Features:

CONSISTENT PERFORMANCE: Matched cup and cone components ensure consistent performance
PREMIUM MATERIALS: Precision manufactured using premium-grade steel for outstanding durability and performance
SMOOTH ROTATION: Crowned raceways and rollers for even load distribution
OE-STYLE DESIGN: Engineered to meet OE specifications
COMPREHENSIVE COVERAGE: Industry-leading coverage for domestic and import applications
RIGOROUS TESTING: Comprehensive testing throughout design and development processes by National engineers for quality you can count on

from

$24.99

This direct replacement differential cover matches the fit and function of the original equipment diff cover for a reliable, leak-free repair. It features a durable design, made to strict specifications, to help ensure reliable service life.

Product Features:

Direct replacement – this differential cover matches the fit and function of the original equipment diff cover on select vehicles
Reliable repair – the smart solution for fixing an existing cover that’s rusted, damaged or leaking differential fluid
Durable construction – this differential cover is made according to strict engineering standards to help ensure dependability
Trustworthy quality – backed by a team of product experts in the United States and more than a century of automotive experience

from

$6.79

This differential pinion shaft lock bolt is designed to match the fit and function of the original part on specified vehicles. Made of quality materials, it is engineered for reliable performance.

Product Features:

Direct replacement – this differential pinion shaft lock bolt matches the fit and function of the factory part on specified years, makes and models
Ideal solution – this bolt is a reliable replacement for an original part that is missing or has failed due to fatigue
Durable construction – this part is made from quality materials to ensure reliable performance and long service life
Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience

from

$99.99

KIT BRG & SEAL GM 7.5″,’82-98

from

$9.29

Motive Gear offers some of the toughest drive train components on the market today. If you are looking for the largest line of performance ring and pinion gear options available with gear sets in a wide range of ratios for nearly every application, both on and off-road, check out Motive Gear. Motive Gear products can be found in the winner’s circle at racing events worldwide. The superior quality of Motive Gear components is the result of years of racing development, outstanding design and state-of-the-art manufacturing methods. Extensive testing is performed on all products by our in-house engineers.

from

$57.99

3 Qt. Penzoil 80W90 conventional gear Oil. W/ bottle of Posi additive.

Product Features:

Includes three quarts of conventional oil and one 4oz bottle of Yukon positraction additive

from

$44.99

3 Qt. Penzoil 80W90 conventional gear Oil.

Product Features:

Includes three quarts of conventional oil

from

$2.99

Product Features:

RING GEAR BOLT 8.5″ 7.5″ 7/16 X 20 LEFT HAND

from

$6.99

Ring gear bolt for GM 7.5″, 7.6″, 7.6″ IRS, 8.0″, 8.25″ IFS, 8.5″, 8.6″ & 8.6″ IRS. 7/16″ x 20.

Product Features:

Ring gear bolt for GM 7.5″, 7.625″, 7.6″ IRS, 8.0″, 8.25″ IFS, 8.5″, 8.6″ and 8.6″ IRS
7/16″ x 20

from

$9.99

5/16″-18 cover bolt, Dana Spicer 25, 27, 30 and 44, AMC Model 20 and Model 35, Chrysler 9.25 rear, GM 7.5″, 7.625″, 8.2″, 8.5″, 12 bolt passenger car and truck.

Product Features:

Cover bolt for Dana Spicer 25, 27, 30 and 44, AMC Model 20 and Model 35, GM 7.5″, 7.625″, 8.2″, 8.5″ and 12 bolt passenger car and truck.
1/2″ head

from

$9.99

Manufactured with premium-grade steel, National taper bearing cups feature crowned raceways to ensure even load distribution.

Product Features:

PREMIUM MATERIALS – Precision manufactured using premium-grade steel for outstanding durability and performance
SMOOTH ROTATION – Crowned raceways for even load distribution
OE-STYLE DESIGN – Engineered to meet OE specifications
COMPREHENSIVE COVERAGE – Industry-leading coverage for domestic and import applications
RIGOROUS TESTING – Comprehensive testing throughout design and development processes by National engineers for quality you can count on

from

$6.99

This differential crush sleeve is designed to match the fit and function of the original sleeve on specified vehicles, and is engineered for durability and reliable performance.

Product Features:

Direct replacement – this differential crush sleeve is designed to match the fit and function of the original sleeve on specified vehicles
Required replacement – when servicing the differential
Durable construction – this part is made from quality materials to ensure reliable performance and long service life
Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience

from

$24.99

Product Features:

BUILT TO LAST: Advanced heat treatment process for strength
PREMIUM MATERIALS: Precision manufactured using premium-grade steel for lasting performance and extended bearing life
RELIABLE PERFORMANCE: Element size and quantity are engineered to meet or exceed the load rating of OE bearings
COMPREHENSIVE COVERAGE: Industry-leading coverage for domestic and import applications
RIGOROUS TESTING: Comprehensive testing throughout design and development processes by National engineers for quality you can count on

Most Sold 1989 Chevrolet S10 4WD Components

Explore our best-selling Chevrolet parts for the 1989 S10 among 5 OEM and aftermarket options starting from $18.79.

show more show less

from

$39.49

This 4WD actuator cable directly replaces the original equipment part on specific vehicle applications. It is reverse engineered to reliably restore proper functionality.

Product Features:

Direct replacement – this 4WD actuator cable matches the fit and function of the original cable on certain vehicle years, makes and models
Effective fix – installation restores four-wheel drive function interrupted by a failed original cable
Related repair – recommended for replacement when installing a new axle actuator
Trustworthy quality – backed by team of designers and engineers in the United States

from

$132.99

The 4WD system on certain vehicles fails when cracks in the actuator’s diaphragm create vacuum leaks. The diaphragm on this Dorman OE FIX actuator uses a mesh-reinforced rubber material to provide three times the durability of the original design.

Product Features:

Improved design – this 4WD actuator has been redesigned to eliminate common failures in the original part caused by exposure to ozone
Upgraded materials – the rubber diaphragm in this 4WD actuator is reinforced with a mesh layer to provide 3X greater durability than the original material
Seamless repair – this upgraded 4WD actuator matches the fit and function of the original part for a trouble-free installation
Quality assured – backed by a team of product experts in the United States and more than a century of automotive experience

from

$80.99

Carquest Premium Vehicle Solutions provides high-quality solutions for a wide range of applications. The 4WD Actuator ensures seamless transition between 2WD and 4WD modes, providing enhanced traction and stability on challenging terrains without manual intervention. Engineered for maximum performance and durability, our products are built to excel in even the most demanding conditions, ensuring reliable operation and long-lasting value.

Product Features:

Durable Construction: Designed with high-quality materials to withstand harsh environmental conditions, ensuring long-lasting performance in extreme temperatures, vibrations, and moisture exposure.
Precision Engineering: Accurate sensing and switching capabilities provide reliable performance, reducing the risk of malfunctions and improving vehicle safety and efficiency.
Easy Installation & Maintenance: Designed for quick installation and minimal upkeep, reducing downtime and repair costs for both manufacturers and consumers.
Fit/Form/Function: Each vehicle electronic component is engineered to meet or surpass OEM standards, ensuring precise fit, optimal functionality, and reliable performance.

from

$32.99

Carquest Premium Vehicle Solutions provides high-quality solutions for a wide range of applications. The 4WD Indicator Light Switch provides instant visual feedback on 4WD engagement, helping drivers quickly verify the vehicle¿s drive mode and ensuring optimal performance in off-road or slippery conditions. Engineered for maximum performance and durability, our products are built to excel in even the most demanding conditions, ensuring reliable operation and long-lasting value.

Product Features:

Durable Construction: Designed with high-quality materials to withstand harsh environmental conditions, ensuring long-lasting performance in extreme temperatures, vibrations, and moisture exposure.
Precision Engineering: Accurate sensing and switching capabilities provide reliable performance, reducing the risk of malfunctions and improving vehicle safety and efficiency.
Easy Installation & Maintenance: Designed for quick installation and minimal upkeep, reducing downtime and repair costs for both manufacturers and consumers.
Fit/Form/Function: Each vehicle electronic component is engineered to meet or surpass OEM standards, ensuring precise fit, optimal functionality, and reliable performance.

from

$18.79

CARQUEST premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.

Top-Rated Drivetrains Brands For Your 1989 Chevrolet S10

Shop for the best-rated brands offering Drivetrains and other products for your 1989 Chevrolet S10s. Below you’ll find some of our best rated Drivetrains from National, Driveworks, and Motive Gear, and more. Drivetrains from these brands that fit a 1989 S10 start at just $10.99 and are rated as high as 4.3 stars. OEM and aftermarket Drivetrains don’t get more top quality, durable, and affordable than from the brands below.

Popular National 1989 Chevrolet S10 Drivetrains

When it comes to maintaining or upgrading your 1989 Chevrolet S10, using quality Drivetrains is essential to ensure durability and a perfect fit. National ticks all of those boxes. We offer a wide selection of National Drivetrains, specifically designed for the 1989 Chevrolet S10. With over 3 National brand Drivetrains in stock, you’re sure to find what you need. The prices for these top-notch parts start as low as $11.99, with an average price of just $13.99. Plus, with over 32 customer reviews and an average rating of 4.3 stars, you can trust that our National Drivetrains will get the job done right. Choose Advance Auto Parts for reliability, quality, and expert-approved parts that keep your vehicle running strong.

from $12.99

(5)

Multi-Purpose Seal

“It seals great so far”

from $11.99

(2)

Bearing Race

“Reasonable price and woks well. front diff 2006 Escalade esv”

from $16.99

(25)

Multi-Purpose Bearing

“Smooth”

Popular Driveworks 1989 Chevrolet S10 Drivetrains

Driveworks auto parts is one of the highest quality Drivetrain brands in the market. Any 1989 Chevrolet S10 owner should feel confident when installing genuine Driveworks parts in their vehicle. To ensure the best fit and performance for your 1989 S10, Advance Auto Parts carries a full inventory of 3 Driveworks Drivetrains. Plus you will be keeping your Chevrolet in peak condition while saving money because prices on these Driveworks Drivetrains range from $10.99 to $15.99, plus, with more than 59 customer reviews and an impressive 4.2 stars average rating, you can be confident the Fram Drivetrains below will deliver on both quality and value.

from $15.99

(52)

Universal Joint

“Perfect fit.”

from $15.99

(4)

Universal Joint

“Exactly what I needed”

from $10.99

(3)

Taper Bearing Cone

“Worked for my 2006 escalade esv front diff”

FAQs for 1989 Chevrolet S10 Drivetrains

Which Drivetrains are best-sellers for 1989 Chevrolet S10s?

Out of 308 Drivetrains that fit 1989 Chevrolet S10s, the following parts are the top sellers:

Synchromesh Manual Transmission Fluid, Enhances Synchronizer Performance (7070062) – $12.49
Greaseable Premium Universal Joint (10086738) – $42.99
Greaseable Premium Universal Joint (10086900) – $35.99

What’s the price range for 1989 Chevrolet S10 Drivetrains?

Drivetrain prices for the 1989 Chevrolet S10 start at $2.29 and go up to $2,219.99 for the most premium parts.

What’s the average price of a Drivetrain for a 1989 Chevrolet S10?

The average price for Drivetrains for the 1989 Chevrolet S10 is $248.76. Keep in mind the variety of part types within our Drivetrain category so you are likely to find a wide range of prices across a variety of parts and components.

Does Advance Auto Parts sell Drivetrains for other Chevrolet S10 model years?

Yes, we currently carry Drivetrains for 20 model years of Chevrolet S10s between 1982 and 2003. Drivetrains are bought most frequently for the following model years: 2003, 2002, 2001, 2000, 1999, 1998, 1997, 1996, and 1995.

What are the cheapest Drivetrains for my 1989 Chevrolet S10?

The cheapest 1989 Chevrolet S10 Drivetrains we carry in stock are:

Spindle Washer – I.D. 24.7mm O.D. 45.1mm Thickness 4.7mm (Sold by each) (22148783) – $2.29
Differential Ring Gear Bolt (10282141) – $2.49
Differential Pinion Gear Washer (10593184) – $2.49
Crush Sleeve (10715252) – $2.79
Ring Gear Bolt (20520168) – $2.99

What are the top-rated Drivetrains that fit the 1989 Chevrolet S10?

Out of 4,042 reviews by customers, our 1989 Chevrolet S10 Drivetrains have an average customer rating of . These are some of the highest-rated Drivetrain types for the 1989 Chevrolet S10 and their top-rated products:

4WD Components
- Forward Actuator Control Cable (10040036) – $39.49
Universal Joints
- Forward Actuator Control Cable (10040036) – $39.49

What types of Drivetrains do you sell for my 1989 Chevrolet S10?

As of 3/1/26, these are some of the most in-demand types of Drivetrains for a 1989 Chevrolet S10:

Can I get help with 1989 Chevrolet S10 Drivetrain orders?

Contact our customer support team, by chat or phone, through the help desk page, where you can find instant answers about Chevrolet Drivetrains and more.

What is your return policy for Chevrolet S10 Drivetrains?

Advance Auto Parts keeps returns simple. For new Chevrolet S10 Drivetrains and accessories, your online orders can be returned, in their original condition, within 45 days. For requirements, see the returns page.

1989 Chevrolet S10 Drivetrains

Motive Gear – Differential Gear Install Kit (Part No.GM8.5IKL)

Yukon Gear – Minor Install Kit For GM ’83-’97 7.2" IFS Differential (Part No.12048)

Yukon Gear – Standard Open Spider Gear Kit For Late 7.625" GM With 28 Spline Axles (Part No.16049)

Yukon Gear – C/Clip For GM 7.5", 7.6" & 8" (Part No.33082)

Yukon Gear – Dura Grip Positraction For GM 7.5" & 7.625" With 26 Spline Axles, 3.23 & Up (Part No.26017)

Dorman – Drive Shaft: Adjustable (Part No.976-585)

Yukon Gear – Inner Axle Retaining Snap Ring For 7.2" GM (Part No.33367)

National – Multi-Purpose Bearing (Part No.N-5210-KLB)

Dorman – Uni-Fit C.V. Joint Boot Kit Outer greater than 3.58 In. Diameter (Part No.614-003)

Dorman – Help – Axle Shaft Lock Assortment (Part No.81050)

Yukon Gear – High Performance Ring & Pinion Gear Set For GM IFS 7.2" (S10 & S15) In A 3.42 Ratio (Part No.24471)

Yukon Gear – Posi Shim Kit For GM 7.5" & 7.625" Eaton Positraction (Part No.16047)

Schaeffler – Bearing – CRB (Cylindrical Roller Bearing) (Part No.FC67148.5)

National – Multi-Purpose Bearing (Part No.A-36)

Dorman – Distorted Thread Spindle Nut M24-2.0 Hex Size 36mm (sold by each) (Part No.615-095)

Pro-King – Differential Cross Shaft (Part No.741A673)

Yukon Gear – 3 Qt – 80W90 Conventional Gear Oil With Posi Additive (Part No.15003)

Yukon Gear – Spider Gear Set For GM 7.5" & 7.625" Dura Grip Posi, 26 Spline (Part No.16116)

Yukon Gear – 7.5 & 7.625 Standard Open Pinion Gear Thrust Washer (Part No.33390)

Dorman – Forward Actuator Control Cable (Part No.600-601)

National – Multi-Purpose Bearing (Part No.A-5)

Yukon Gear – 7.5 GM Cover Gasket (Part No.23018)

Yukon Gear – Posi Spring Kit For GM 7.5", With Preload Plates (Part No.33206)

Yukon Gear – Pinion Nut (Part No.33152)

Yukon Gear – 1350 Lifetime Series U/Joint (Part No.42021)

Yukon Gear – Pinion Depth Shims For GM 8.25" IFS, 8.5", 12 Bolt Car, Ford 8.8" & Chrysler 8.25" (Part No.55009)

Felpro – Axle Housing Cover Gasket Irregular Shaped 10 Bolt Hole Gasket (Part No.RDS 55072)

Felpro – Axle Housing Cover Gasket Oval Shaped 10 Bolt Hole Gasket (Part No.RDS 55028-1)

Felpro – Transfer Case Adapter Gasket (Part No.72769)

National – Multi-Purpose Seal (Part No.5200)

National – Transfer Case Output Shaft Seal (Part No.710046)

National – Shaft Repair Sleeve (Part No.99138)

National – Multi-Purpose Seal (Part No.9613S)

National – Multi-Purpose Seal (Part No.710928)

Dorman – Help – Transfer Case Switch (Part No.49315)

National – Multi Purpose Seal (Part No.7412S)

Dorman – Oil Drain Plug Standard M22-1.50, Head Size- 30mm (Part No.090-061CD)

National – Multi-Purpose Seal (Part No.341022)

National – Multi-Purpose Bearing (Part No.B-5020)

USA Standard Gear – TCase Shift Fork (Part No.72275)

National – Multi-Purpose Bearing (Part No.N-5210-KLB)

National – Multi-Purpose Bearing (Part No.J-2416)

USA Standard Gear – Transfer Case NP241 Input Shaft (Part No.74317)

USA Standard Gear – TCaseBrg-SealKit (Part No.73873)

Victor Reinz – Transfer Case Gasket (Part No.71-14104-00)

USA Standard Gear – TCaseShiftForkInsert (Part No.70666)

USA Standard Gear – Shift Fork Insert (Part No.71380)

Schaeffler – Cup (Part No.M88010)

Driveworks – Transfer Case Output Shaft Seal (Part No.S-710046)

USA Standard Gear – ManTransInptShftSeal (Part No.70537)

Spicer – Universal Joint (Part No.5-1310X)

Dorman – Help – Axle Shaft Retainer (Part No.05311)

National – Shaft Repair Sleeve (Part No.99174)

National – Wheel Bearing (Part No.5707)

National – Multi-Purpose Bearing (Part No.A-5)

National – Drive Shaft Center Support Bearing (Part No.HB-88508-A)

Carquest Premium – New CV Axle Shaft Assembly (Part No.NCV10035)

Driveworks – Axle Repair Bearing (Part No.S-RP-5707)

National – Drive Shaft Center Support Bearing (Part No.HB-88107-A)

Anchor – Center Support Bearing Motor Mount: Center, 1 Piece (Part No.6056)

Driveworks – Ball Bearing (Part No.S-HB-88107-A)

Yukon Gear – R1563Tav Rear Axle Bearing And Seal Kit (Part No.10004)

National – Multi-Purpose Bearing (Part No.B-2010)

Yukon Gear – C/Clip For GM 7.5", 7.6" & 8" (Part No.33082)

Dorman – Drive Shaft Repair Kit – Only Fits Dorman Driveshafts (Part No.932-988)

Driveworks – Differential Seal (Part No.S-223255)

Yukon Gear – Inner Axle Retaining Snap Ring For 7.2" GM (Part No.33367)

Driveworks – Drive Shaft Center Support (Part No.S-HB-88107-E)

National – Shaft Repair Sleeve (Part No.99125)

National – Multi-Purpose Bearing (Part No.88107-BVV)

Dorman – Drive Shaft: Greaseable, Adjustable (Part No.976-055)

Dorman – Drive Shaft: Greaseable, Adjustable (Part No.976-176)

Dorman – Drive Shaft: Greaseable (Part No.976-809)

Dorman – Drive Shaft: Greaseable (Part No.976-810)

Spicer – Universal Joint, Greaseable 1310 Series OSR (Part No.5-153X)

Driveworks – Universal Joint (Part No.DW-445)

MOOG Driveline Products – Greaseable Premium Universal Joint (Part No.534G)

MOOG Driveline Products – Greaseable Premium Universal Joint (Part No.369)

Driveworks – Universal Joint (Part No.DW-534G)