1989 Chevrolet R2500 Suspension Parts

Monroe® Shock-Mate® Shock Absorber Boot Kits are universal replacement shock boots use to protect the shock’s piston rod from dirt, mud and other contaminants – protecting the life of your shocks.

Product Features:

• Protects the shock’s piston rod from damage
• Universal design for easy installation
• Tie-strap included for a secure fit
• Constructed from high quality urethane for maximum durability
• Multiple color choices available

The Air Command Standard Duty Dual Electric Air Compressor System Kit Allows You To Adjust Your Air Springs With The Touch Of A Button. It Offers A Built in Air Source For Your Suspension System, Making It Easy To Alter Your Springs To Align With The Load Type And Environment. When Shopping For Air Accessories, You will Find That Firestone Air Command Standard Duty Dual Electric Air Compressor System Kit Is Designed To Have A Couple Of Special Benefits. First, The Air Command Standard Duty Dual Electric Air Compressor System Kit Comes Ready To Install, So You Can Set It Up And Get Back To The Road where You Want To Be. Just Connect A Few Wires To The Compressor And A Few To Your Vehicle. The Air Lines And Wiring Harness Can Be Plugged Into The Same Side Of The Unit For Smoother Routing Of Lines And Power Supply. After The Air Command Standard Duty Dual Electric Air Compressor System Kit Is Properly Installed, You Can Make Pressure Adjustments By Pressing A Single Button. This Air Command Standard Duty Dual Electric Air Compressor System Kit Component Allows For Side To Side Or Front to rear Leveling, Real time Pressure Readout, And Dual Left And Right PSI And Pressure Control Readouts. The Air Command Standard Duty Dual Electric Air Compressor System Kit Easy to read Needle Gauge Can Be Viewed Day Or Night, Without Straining Or Squinting Your Eyes. Prior To Installing The Air Command Standard Duty Dual Electric Air Compressor System Kit, Review The Instructions And Identify All Of The Components To Help Make Sure You Get Maximum Performance From Both Your Air Springs And Air Command Standard Duty Dual Electric Air Compressor System Kit. The Installation Steps Are Different Depending On Whether You are Enhancing An Existing Air Helper Spring System With The Air Command Standard Duty Dual Electric Air Compressor System Kit Or Installing It With A New Air Spring System.

Product Features:

• Individual Air Accessory Components Are Also Available, Including Compressors, Air Tanks, And Mounting Solutions, Providing A Wide Variety Of Air Control Assist Solutions
• Adjust The Ride For Various Load And Road Conditions With A Switch, Remote Or Mobile App
• Provides An Instant Air Source For The Air Helper Springs Or Accessories
• Dual Point Fill (Both Air Springs Fill Independently Of Each Other)
• Light Duty Compressor Specs (120 PSI Max Air Pressure, 9 Percent Duty Cycle, 0.32 CFM)

Get ahead of fatigued or rusted leaf spring shackles before they become dangerous. Made of sturdy steel with a power coated finish to resist corrosion, this leaf spring shackle is a direct replacement for your vehicle’s stock shackle.

Product Features:

• Direct replacement – This leaf spring shackle fits and performs like original equipment shackle
• Quality construction – manufactured from durable steel and powder coated for corrosion resistance and a long service life
• Excellent value – original equipment quality at a lower price
• Ready to install – all essential hardware is included for an easy installation

Daystar Leveling Kits work within the factory suspension design, meaning that we work within the factory design parameters to achieve an increase in ride height that levels the stance of the vehicle. Because we work within the factory design, there are not a bunch additional modifications involved. Everything needed is included in the kit, there is everything you need and nothing you do not. If there are extra items required, such as longer shocks, it is clearly stated in the application description. Torsion bar applications require their own unique approach to leveling the stance of the vehicle. With torsion bar applications, we supply new forged torsion keys that meet or exceed factory specifications. These torsion keys have been re-indexed to increase ride height up to 2 inch and level the stance of the vehicle. In select applications, extended shock brackets are also included. Daystar Leveling Kits include only front lift components to level the stance of the vehicle. We also offer Budget Boost kits, which provide a mild increase in ride height and are more economically priced than our Leveling Kits. Since our start with Leveling Kits in 1995 we have used our expertise to develop over 300 applications that span all of the popular trucks and SUVs…do your homework and you’ll see that we have done ours

Product Features:

• No Metal-On-Metal Contact, Daystar Uses Polyurethane Material In Its Leveling Kits For A Reason, It is An Insulator, Absorbs The Noise, Vibration And Harmonics (NVH) That Come From The Suspension
• Maintains Factory Ride Quality, Daystar Products Work With The Factory Springs With No Preloading Involved, So Vehicle Will Ride Just Like It Did Off The Showroom Floor
• Long Lasting Finish, Polyurethane Is Resistant To The Elements, Road Grime And All Automotive Chemicals, So Comfort Ride Kits Will Look Just Like They Came Out Of The Box For Years To Come
• Top Mount Easy Install Design

The KYB Gas-a-just monotube shock absorber has additional performance advantages over the traditional twin-tube design: It can instantly, automatically adjust to your performance needs and never experiences fade due to aeration. The KYB Gas-a-just has two separate working chambers: An air-free hydraulic piston and valve area for responsiveness and control, and a second high-pressure nitrogen gas area with a floating piston that provides a comfortable ride during normal driving and adds instant performance on demand.

Product Features:

• Adds Up To 25% More Damping Performance Over Original Equipment Shocks
• Components And Valving Designed Specifically For Gm Trucks
• Gas-A-Just Monotubes Include Additional Damping Over One Design For Vehicles That Work, Tow, And Have Larger, Heavier Tires & Wheels
• High Pressure Monotube Design Separates The Gas And Oil For Fade Free Operation And Instant Response
• Fluid Leaking Can Be A Cause Of Shock Failure, The KYB Gas-A-Just Has An Ultra-Smooth Triple Chrome Plated Chrome Piston Rod To Reduce Seal Wear
• The Higher Gas Pressure Of The KYB Gas-A-Just Responds Quickly To Improve Steering Response
• Electronic Safety Systems Depend On The Suspension, Brakes And Tires Operating As The Vehicle Manufacturer Intended. The KYB Gas-A-Just Helps Keep Electronic Safety Systems Performing As Designed.

Designed to provide inflation control of your air helper springs. This kit will be an asset to your vehicle, meeting nearly all of your air supply needs.

Product Features:

• Individual Air Accessory Components Are Also Available, Including Compressors, Air Tanks, And Mounting Solutions, Providing A Wide Variety Of Air Control Assist Solutions
• Provides An Instant Air Source For The Air Helper Springs Or Accessories
• Single Point Fill (Both Air Springs Fill To The Same Pressure)
• Light Duty Compressor Specs (120 Pounds Per Square Inch Max Air Pressure, 9 Percent Duty Cycle, 0.32 CFM)

By constantly introducing design enhancements that extend product life and simplify installation and replacement, MOOG has earned its reputation as the chassis industry’s Problem Solver.

Product Features:

• Easy to install
• Restores like-new steering and handling
• Construction and design validated by MOOG engineers
• Loose or worn chassis parts can lead to premature tire wear
• Incorporates proven design and engineering features

Adds performance to any shock. Benefit from better durability over O.E.M. rubber bushings. Important to use for competition of any kind. Great for show vehicles – adds that finishing touch. Made of Energy’s Hyper-Flex performance polyurethane.

Product Features:

• Made from HYPER-Flex Polyurethane
• Gives Shock Maximum Efficiency
• Add to the Performance of Every Shock
• Gives Instant Response/Control to Suspension

Monroe® Shock-Mate® Shock Absorber Boot Kits are universal replacement shock boots use to protect the shock’s piston rod from dirt, mud and other contaminants – protecting the life of your shocks.

Product Features:

• Protects the shock’s piston rod from damage
• Universal design for easy installation
• Tie-strap included for a secure fit
• Constructed from high quality urethane for maximum durability
• Multiple color choices available

Driveworks control arms are made to meet or exceed OE specifications, and the ball joint is preinstalled in the control arm. Driveworks chassis parts ensure improved steering response and durability.

This high quality chassis part will improve overall vehicle handling, reduce tire wear and increase the life of other steering and suspension components. These chassis parts are manufactured to meet or exceed OEM.

Product Features:

• Reduces vibration
• Reduces road noise
• UV resistant
• No Squeak

By constantly introducing design enhancements that extend product life and simplify installation and replacement, MOOG has earned its reputation as the chassis industry’s Problem Solver.

Product Features:

• Easy to install
• Restores like-new steering and handling
• Construction and design validated by MOOG engineers
• Loose or worn chassis parts can lead to premature tire wear
• Incorporates proven design and engineering features

Every Febi Control Arm Shaft Kit is manufactured using only the highest quality materials and is designed to maintain suspension geometry.

Product Features:

• OE expertise and quality
• Precision manufactured
• Corrosion protection

By constantly introducing design enhancements that extend product life and simplify installation and replacement, MOOG has earned its reputation as the chassis industry’s Problem Solver.

Product Features:

• 100% Load tested
• Easy to install
• Provides like-new steering
• Designed to lower stresses for longer service life
• Worn or sagging coil springs can cause premature tire wear due to vehicle misalignment

Product Features:

• Premium components and our own manufactured circuit board ensure precise operation, reliability, and extra durability for a longer service life
• Our electronic voltage regulator PC boards are encapsulated in epoxy to deliver improved performance and resistance to failure that may be caused by vibration and corrosion of electrical connections
• All parts are manufactured to stringent quality requirements. Our plants are TS16949 and ISO9001 certified which ensures that every part is the right part for the right vehicle.

This suspension control arm is precision-engineered and rigorously tested to provide reliable replacement for the original equipment on specific vehicles.

Product Features:

• Direct replacement – fits and performs like the original equipment on specific vehicles
• Reliable fit – precision-engineered to match the design and dimensions of original components
• Durable construction – manufactured to strict standards using sturdy, safe materials
• Rigorously tested – thorough quality control measures ensure longevity

This suspension control arm is precision-engineered and rigorously tested to provide reliable replacement for the original equipment on specific vehicles.

Product Features:

• Direct replacement – fits and performs like the original equipment on specific vehicles
• Reliable fit – precision-engineered to match the design and dimensions of original components
• Durable construction – manufactured to strict standards using sturdy, safe materials
• Rigorously tested – thorough quality control measures ensure longevity

This suspension control arm is precision-engineered and rigorously tested to provide reliable replacement for the original equipment on specific vehicles.

Product Features:

• Direct replacement – fits and performs like the original equipment on specific vehicles
• Reliable fit – precision-engineered to match the design and dimensions of original components
• Durable construction – manufactured to strict standards using sturdy, safe materials
• Rigorously tested – thorough quality control measures ensure longevity

Designed for midsize and full-size trucks and vans, Monroe® Gas-Magnum® shock absorbers provide firm control without a harsh ride. With up to twice the fluid capacity of standard 1-in. bore shocks, they work more efficiently with less effort.

Product Features:

• DESIGNED FOR TRUCKS AND VANS — Engineered for hardworking full-size trucks and vans and features full-displaced valving on compression cycles to deliver controlled ride and handling
• BUILT TO LAST — Heavy-duty nitrocarburized rod (non-dust shield units only) and sintered iron piston enhance durability for longer service life while self-lubricating fluid seal reduces friction against piston rod to reduce wear
• CONSISTENT RIDE — OE all-weather fluid contains special modifiers to handle extreme temperatures and help reduce friction and ensure smooth rod reaction
• IMPROVES PERFORMANCE — Nitrogen gas-charge maintains tire-to-road contact for improved ride and handling by reducing aeration and shock fade
• LONGER SERVICE LIFE — Larger bore and bigger 2-in. reserve tube work together to hold more oil for greater capacity to allow the shock to work efficiently for controlled ride and longer service life
• Nitrogen Gas Charged: For improved ride and handling, helps maintain tire to road contact by reducing aeration – on most applications
• Sintered Iron Piston: Stronger than traditional metals, enhances durability for longer service life.
• Special Seal: ‘Self-lubricating’ fluid seal designed to retain gas without excessive wear or friction.

Get premium control and performance with Rancho RS9000®XL shocks. Recognized as the first nine-position manually adjustable ride control series in the off-road market, RS9000XL shocks are ideal for on- and off-road use, towing and more.

Product Features:

• NINE LEVELS OF PERFORMANCE — Nine-position easy-to-adjust knob allows customized damping control and firmness for on-road and off-road flexibility
• DESIGNED FOR HARDWORKING VEHICLES — Ideal for stock or lifted trucks, SUVs and Jeeps that tow, haul or go off road
• INDUSTRY FIRST — Recognized as the first nine-position manually adjustable shock series in the off-road market
• REDUCES FADE — Nitrogen gas pressurized to 120 PSI to minimize air-to-oil mixture and reduce damping performance fade and foaming
• STRONG AND DURABLE — Features an application-specific 18mm nitro-carburized piston rod to resist scuffs and corrosion, double-welded loops at stress areas and 1.25-in. sintered iron piston for enhanced structural integrity
• HANDLES EXTREME TEMPERATURE CHANGES — Up to 2.75-in. tri-tube body (application specific) filled with all-weather fluid allows for cooler operation, increased vehicle control and ability to withstand internal temperatures of -40 to 248°F
• SMOOTH PERFORMANCE — Polyurethane rebound bumper and bushings and graphite-filled fluon-banded piston help absorb ride harshness and enhance responsiveness to changing road conditions for an overall smoother ride
• BUILT TO LAST — Low-friction, self-lubricating seal retains gas and oil for quicker rebound and smoother compression while the long-lasting premium liquid metallic finish and polyvinyl protective boot ensures long life

Tough conditions demand tough truck shocks. The large bore KYB MonoMax provides the additional stability that heavier, more powerful or high center of gravity vehicles demand. The KYB MonoMax is a heavy duty monotube shock absorber that provides the most handling, control and durability of any KYB shock; and its just for trucks. The MonoMaxs tough design automatically adjusts to driving conditions with fade-free performance. The KYB MonoMax has an outstanding reputation for vehicles that do real work, go off-road, tow a trailer or haul heavy loads. It uses a work-ready, zinc-coated steel piston ring and includes an off-road dust boot.

Product Features:

• Maximum Performance Upgrade With Up To 40% More Damping Performance Than Standard Shock Absorbers
• Perfect Solution When You Need To Upgrade Suspension Performance On Your Gm Truck
• Truck Monotube Design Outperforms All Other Standard Shock Absorbers
• Zinc-Coated, Stainless Steel Piston Ring Provides A Positive Seal In The Most Extreme Conditions
• Rubber Boot To Protect The Shaft And Keep Dirt And Debris Away From The Seals

Gas-charged shock absorber that provides improved vehicle control for today’s light trucks, vans, full-size picks-ups and 4×4’s at an economical price.

Product Features:

• Available for import and domestic trucks, vans, full-size pick-ups and 4×4’s
• Gas-charged unit
• Improved handling and control
• Economical OE replacement
• Meets OE product specifications

The shock that started it all! Rancho® RS5000 series has been the shock of choice for light trucks and sport utility vehicles since 1985. Available for stock and lifted applications, RS5000 is ideal for on and off-road use, at an affordable price.

Product Features:

• Ten-stage velocity sensitive valving – Provides tuning specific for each vehicle
• 5/8-in. (16mm) diameter piston rod (select applications) – Adds strength and durability. Size varies by application.
• 1 3/8-in. (35mm) diameter piston (select applications) – Ensures performance in any environment
• Protective boot included – Protects the shock rod and oil seal

By constantly introducing design enhancements that extend product life and simplify installation and replacement, MOOG has earned its reputation as the chassis industry’s Problem Solver.

Product Features:

• Easy to install
• Restores like-new steering and handling
• Engineered to provide long life and dependability
• Construction and design validated by MOOG engineers
• Incorporates proven design and engineering features

Adds a dramatic amount of performance and durability to any vehicle, cars, trucks and SUVs. Helps the vehicle be in control – when maneuvering through turns, during standing start accelerations, braking, even over bumps and berms. Made of Energy’s Hyper-Flex performance polyurethane which lasts 5 -10 times longer than conventional rubber components.

Product Features:

• Made of Superior Hyper-Flex+ Material
• Adds Dramatic Amount of Performance/Durability
• Helps Vehicle Be in Control
• Allows the Suspension to Function Properly

Adds a dramatic amount of performance and durability to any vehicle, cars, trucks and SUVs. Helps the vehicle be in control – when maneuvering through turns, during standing start accelerations, braking, even over bumps and berms. Made of Energy’s Hyper-Flex performance polyurethane which lasts 5 -10 times longer than conventional rubber components.

Product Features:

• Made of Superior Hyper-Flex+ Material
• Adds Dramatic Amount of Performance/Durability
• Helps Vehicle Be in Control
• Allows the Suspension to Function Properly

By constantly introducing design enhancements that extend product life and simplify installation and replacement, MOOG has earned its reputation as the chassis industry’s Problem Solver.

Product Features:

• Easy to install
• Restores like-new steering and handling
• Engineered to provide long life and dependability
• Construction and design validated by MOOG engineers
• Incorporates proven design and engineering features

Adds a dramatic amount of performance and durability to any vehicle, cars, trucks and SUVs. Helps the vehicle be in control – when maneuvering through turns, during standing start accelerations, braking, even over bumps and berms. Made of Energy’s Hyper-Flex performance polyurethane which lasts 5 -10 times longer than conventional rubber components.

Product Features:

• Made of Superior Hyper-Flex+ Material
• Adds Dramatic Amount of Performance/Durability
• Helps Vehicle Be in Control
• Allows the Suspension to Function Properly