1989 Chevrolet K1500 Drivetrains

Essential 1989 Chevrolet K1500 Drivetrains

Yukon Gear – Super Carrier Shim Kit For Ford 8.8", GM 12 Bolt Car & Truck, 8.6 & Vette (Part No.55002)

Super Carrier Shim Kit For Ford 8.8", GM 12 Bolt Car & Truck, 8.6 & Vette

from

$59.99
Product Features:
  • Super carrier shim kit for Ford 8.8″, GM 12 bolt passenger car and truck, GM 8.0″, 8.6″, 8.6″ IRS and 1963-1979 Corvette
  • Interlocking design makes installation much easier
See More

Driveworks – Clutch Release Bearing (Part No.S-SCH-208)

Clutch Release Bearing

from

$8.49
Product Features:
  • Brand may vary by location
See More

Motive Gear – Differential Gear Install Kit (Part No.GM9.5IKL)

Differential Gear Install Kit

from

$79.99


Product Features:
  • MINI INSTALL KIT-GM9.5/CHRY9.25 FRT
See More

Carquest – Engine Camshaft Position Sensor Connector (Part No.PT196)

Engine Camshaft Position Sensor Connector

from

$35.99
BWD is an aftermarket leader, providing a premium line of engine management products. BWD manufactures and distributes high technology critical components for late model domestic and import vehicles. BWD is constantly evolving to give customers the competitive edge they need to compete in today’s ever-changing marketplace.

Product Features:
  • Our control modules feature double wire bonds for better connections, greater dependability and longer life despite being subjected to intense vibration and the tough operating environment
  • Copper slug heat sinks provide better heat dissipation to prevent heat from damaging the module
  • Our ignition modules will respond to a weak signal from the crankshaft position sensor and begin energizing the coils immediately for better starts in cold weather
  • High-temperature polymer housing reducing moisture intrusion and minimizes vibration damage for extended life and improved reliability
  • Our ignition modules are durability tested for 500 thermal cycles ranging from -40C to +125C
See More

Dorman – 4 Wheel Drive Actuator Pigtail (Part No.645-902)

4 Wheel Drive Actuator Pigtail

from

$113.99
This 4WD actuator wiring harness directly replaces the original harness on certain vehicle years, makes and models.

Product Features:
  • Direct replacement – this four-wheel drive actuator pigtail matches the fit and function of the original equipment
  • Effective fix – properly restores 4WD functionality after original harness fails
  • Durable construction – built for reliable longevity, free of defects in materials and workmanship
  • Trustworthy quality – backed by team of designers and engineers in the United States
See More

National – Bearings (Part No.207)

Bearings

from

$32.99
National Oil Seals & Bearings offer a full line of premium oil seals and bearings.

Product Features:
  • Premium bearing design matches OEM specifications
  • Precision manufactured using premium-grade steel for outstanding durability and performance
  • Controlled heat treating process for lasting performance and extended bearing life
  • Industry leading coverage
  • Professional technicians know they can depend on National
See More

Yukon Gear – 8.5" & 8.6" GM Standard Open Pinion Gear Thrust Washer – Also Fits 8.5" Eaton With 0.795" Cross Pin (Part No.33385)

8.5" & 8.6" GM Standard Open Pinion Gear Thrust Washer - Also Fits 8.5" Eaton With 0.795" Cross Pin

from

$10.99
8.5″ & 8.6″ GM standard Open pinion gear Thrust washer. also fits 8.5″ Eaton with 0.795″ cross pin.

Product Features:
  • Pinion gear thrust washer for GM 8.5″ and 8.6″
  • Fits standard open differentials only
  • 0.795″ I.D.
See More

Yukon Gear – Standard Open Spider Gear Set For ’07 & Up GM 8.6" (Part No.16146)

Standard Open Spider Gear Set For '07 & Up GM 8.6"

from

$217.99
Standard open spider gear set for ’07 & up GM 8.6″. This spider gear set fits casting number 8064.

Product Features:
  • Spider gear kit
  • Fits 2007 and up GM 8.6″ open differential
  • Includes two side gears, two pinion gears, cross pin shaft, cross pin bolt and spider gear thrust washers.
See More

Pro-King – Rear Axle Shaft Kit (Part No.AXK-166)

Rear Axle Shaft Kit

from

$137.99
Pro-King is the leading supplier of transmission and driveline products in the aftermarket. All products are designed to meet or exceed OE quality, form, fit and funtion.

Product Features:
  • High strength steel
  • Dual heat treating process
See More

Carquest – 4WD Actuator (Part No.FWD32)

4WD Actuator

from

$111.99
High-quality products that meet OE appearance and performance to provide professional technicians and DIYers with a cost-effective solution.

Product Features:
  • Designed to OE standards for ease of installation
  • Robust design and high grade materials meet the stringent demands of today’s service professional
  • Our switches are manufactured under a completely quality control process from componentry to finished products by experienced professional
See More

USA Standard Gear – TCaseShiftForkInsert (Part No.70666)

TCaseShiftForkInsert

from

$11.99
TCaseShiftForkInsert

Yukon Gear – 1541H Left Hand Stub Axle For ’98 And Newer 8.25" IFS (Part No.21618)

1541H Left Hand Stub Axle For '98 And Newer 8.25" IFS

from

$239.99
Yukon 1541H left hand stub axle for ’88-’11 GM 8.25″ IFS. Yukon 1541H alloy axles offer a strength increase over stock while retaining a low cost. Yukon 1541H axles come with a one year warranty against manufacturing defects.

Product Features:
  • 28 spline
  • Fits GM 8.25″ IFS in 1988 – 2011 half ton truck
  • Left hand inner
See More

Yukon Gear – 9.5" GM C/Clip (Part No.33081)

9.5" GM C/Clip

from

$10.99
9.5″ GM C/clip.

Product Features:
  • c-clip for GM 9.5″
See More

Dorman – Front Drive Shaft: Greaseable, Adjustable (Part No.938-224)

Front Drive Shaft: Greaseable, Adjustable

from

$479.99
Replacing a drive shaft doesn’t have to be complicated. This complete drive shaft assembly is pre-balanced and ready to install with 100% new yokes, tubes, constant velocity (CV) joints and universal joints.

Product Features:
  • Direct replacement – this drive shaft is made to the original equipment dimensions for dependable fit and performance
  • 100% new – this drive shaft is made from all new components so there’s no core charge or return hassle
  • Ready to install – this drive shaft arrives pre-balanced to make installation quick and simple
  • Serviceable construction – non-staked universal joints are designed for future serviceability
See More

Motive Gear – Differential Ring and Pinion (Part No.GM10-308)

Differential Ring and Pinion

from

$214.99


Product Features:
  • GM 10BL 8.5 R/P 3.08 MG FRT/REAR
See More

Yukon Gear – Standard Open And Gov-Loc Cross Pin For 9.5" GM (Part No.33402)

Standard Open And Gov-Loc Cross Pin For 9.5" GM

from

$32.99
Standard open and Gov-Loc cross pin for 9.5″ GM.

Product Features:
  • Cross pin shaft
  • Fits GM 9.5″
See More

National – Multi Purpose Seal (Part No.3946)

Multi Purpose Seal

from

$25.99
National has built a reputation as one of the most respected names in the industry. We have offered premium sealing solutions for more than 75 years. Our design team keeps pace with the industry and provides advanced solutions for today’s vehicles.

Product Features:
  • Low swell in hydrocarbon fluids
  • Design type: spring loaded; multi-lip
  • Provides good low temperature capability
  • Temperature range: -40°F to 225°F; -40°C to 107°C
  • Delivers quality and reliable performance for every type of repair
See More

USA Standard Gear – Bearing Kit For GM 8.5" Rear With Aftermarket Large Journal Carrier Bearings (Part No.58050)

Bearing Kit For GM 8.5" Rear With Aftermarket Large Journal Carrier Bearings

from

$211.99
This kit uses Koyo bearings and races along with all high quality small parts. kit includes carrier bearings and races, pinion bearings and races, pinion seal, crush sleeve (if applicable), oil baffles and slingers (if applicable), marking compound and brush. USA Standard Gear does extensive research for each application to make sure your kit will arrive with all the correct parts you need to install your ring & pinion set.

Product Features:
  • Fits GM 8.5″ with LM102911 carrier races
  • Uses Koyo bearings and races
  • Included are carrier bearings and races, pinion bearings and races, pinion seal, pinion nut, crush sleeve, marking compound and brush.
See More

Yukon Gear – 1541H Right Hand Stub Axle For ’88-’06 GM 8.25" IFS (Part No.21619)

1541H Right Hand Stub Axle For '88-'06 GM 8.25" IFS

from

$289.99
Yukon 1541H right hand stub axle for ’88-06 GM 8.25″ IFS. Yukon 1541H alloy axles offer a strength increase over stock while retaining a low cost. Yukon 1541H axles come with a one year warranty against manufacturing defects.

Product Features:
  • 28 spline
  • 15.5″ long
  • Fits GM 8.25″ IFS in 1988 – 2003 half ton truck
  • Right hand inner
See More

Motive Gear – Differential Pinion Seal (Part No.3896)

Differential Pinion Seal

from

$15.99
Motive Gear offers some of the toughest drive train components on the market today. If you are looking for the largest line of performance ring and pinion gear options available with gear sets in a wide range of ratios for nearly every application, both o
See More

Yukon Gear – Standard Open And Gov-Loc Cross Pin Bolt With M10X1.5 Thread For 9.5" And 9.25" GM IFS (Part No.33342)

Standard Open And Gov-Loc Cross Pin Bolt With M10X1.5 Thread For 9.5" And 9.25" GM IFS

from

$23.99
Product Features:
  • Cross pin bolt
  • Fits GM 9.5″ and 9.25″ IFS
See More

Pro-King – Differential Internal Nest Kit (Part No.742G717B)

Differential Internal Nest Kit

from

$191.99
Pro-King is the leading supplier of transmission and driveline products in the aftermarket.

Product Features:
  • All products are designed to meet or exceed OE quality, form, fit and funtion.
See More

National – Bearings (Part No.N-5210-KLB)

Bearings

from

$53.99
National Oil Seals & Bearings offer a full line of premium oil seals and bearings.

Product Features:
  • Premium bearing design matches OEM specifications
  • Precision manufactured using premium-grade steel for outstanding durability and performance
  • Controlled heat treating process for lasting performance and extended bearing life
  • Industry leading coverage
  • Professional technicians know they can depend on National
See More

National – Bearings (Part No.HM88649)

Bearings

from

$21.79
National Oil Seals & Bearings offer a full line of premium oil seals and bearings.

Product Features:
  • Premium bearing design matches OEM specifications
  • Precision manufactured using premium-grade steel for outstanding durability and performance
  • Crowned raceways and rollers to ensure even load distribution for maximum life
  • Industry leading coverage
  • Professional technicians know they can depend on National
See More

Yukon Gear – 14 Plate Carbon Clutches For GM 8.2", GM 8.5", 12T, 12P, Ford 8.8" & Cast Iron ‘Vette (Part No.16041)

14 Plate Carbon Clutches For GM 8.2", GM 8.5", 12T, 12P, Ford 8.8" & Cast Iron 'Vette

from

$404.99
Product Features:
  • Clutch kit
  • Fits Ford 8.8″, 1963-1979 Corvette, GM 12 bolt passenger car and truck, 8.2″, 8.5″ and 8.6″ Dura Grip positraction
  • 14 piece kit
  • Carbon fiber clutches
See More

Yukon Gear – 14 Plate Duragrip Composite Clutches For GM 8.2", GM 8.5", 12T, 12P, Ford 8.8" & Cast Iron ‘Vette (Part No.16064)

14 Plate Duragrip Composite Clutches For GM 8.2", GM 8.5", 12T, 12P, Ford 8.8" & Cast Iron 'Vette

from

$373.99
Product Features:
  • Clutch kit
  • Fits Ford 8.8″, 1963-1979 Corvette, GM 12 bolt passenger car and truck, 8.2″, 8.5″ and 8.6″ Dura Grip positraction
  • 14 piece kit
  • Composite clutches
See More

Carquest Premium – CV Axle Shaft Assembly (Part No.NCV10142)

CV Axle Shaft Assembly

from

$138.99
Carquest Premium constant velocity (C.V.) axle shaft assemblies are 100% new units that are designed to meet or exceed OE specifications. Every part number is tested to guarantee a proper fit and reliable performance. Carquest Premium CV axles are assembled with a specially formulated high-temperature moly grease to resist friction and wear of the bearings and joints. Our strict engineering and quality specifications ensure a long-lasting repair that is guaranteed with an industry-leading warranty.

Product Features:
  • Designed to meet or exceed OE specifications for fit, form and function
  • 100% new axle and components
  • New axle nut or attaching hardware included when applicable
  • Bearings, races and housings are heat-treated for longer life
  • Precision-engineered seal mating surfaces for leak-free performance
  • High moly CV joint grease with stainless-steel boot bands
See More

Carquest Premium – CV Axle Shaft Assembly (Part No.NCV10142XD)

CV Axle Shaft Assembly

from

$201.99
Carquest Premium constant velocity (C.V.) axle shaft assemblies are 100% new units that are designed to meet or exceed OE specifications. Every part number is tested to guarantee a proper fit and reliable performance. Carquest Premium CV axles are assembled with a specially formulated high-temperature moly grease to resist friction and wear of the bearings and joints. Our strict engineering and quality specifications ensure a long-lasting repair that is guaranteed with an industry-leading warranty.

Product Features:
  • Designed to meet or exceed OE specifications for fit, form and function
  • 100% new axle and components
  • New axle nut or attaching hardware included when applicable
  • Bearings, races and housings are heat-treated for longer life
  • Precision-engineered seal mating surfaces for leak-free performance
  • High moly CV joint grease with stainless-steel boot bands
See More

Popular 1989 Chevrolet K1500 Drivetrains Categories

1989 Chevrolet K1500 Drivetrains

You count on your 1989 Chevrolet K1500 to run right. That means taking care of it with regular maintenance, necessary repairs, and the right parts. Advance Auto Parts can help with all of that thanks to our extensive inventory of trusted Drivetrains. With 480 Drivetrains ranging in price from $1.99 to $2,309.99, you’re sure to find everything you need for your 1989 Chevrolet K1500.

Brands matter. If you want to shop a specific Drivetrains brand, we stock 25 different brands like Moog, Valvoline, and Driveworks. 1989 Chevrolet K1500 Drivetrains start as low as $1.99!

One of the best ways to find top quality OEM or aftermarket Drivetrains is by asking professionals. Short of that, you can shop with confidence thanks to our 7,488 extensive product reviews on 1989 Chevrolet K1500 Drivetrains. Some of the top-rated Drivetrains products we carry are Universal Joint with 4.4 stars and CV Axle Shaft Assembly with 4.4 stars.

Did we mention you can order your Drivetrains from our online catalog and have them shipped right to your garage? Or, if you feel like seeing the parts first-hand, search for your nearest Advance Auto Parts location above and pick up in-store when you’re ready. Browse our full Drivetrains inventory for your 1989 Chevrolet K1500 below to get started!

Top-Rated Drivetrains Brands For Your 1989 Chevrolet K1500

Trusted Drivetrains OEM and aftermarket product brands are what Advance Auto Parts specializes in. The brands we work with are sure to keep that 1989 Chevrolet K1500 running right for years to come. In our inventory you’ll find brands like Moog, Valvoline, Driveworks, and even more.

Popular Pennzoil Drivetrains

You’ll find popular Pennzoil brand products across Differentials. All are waiting to get your 1989 Chevrolet K1500 back on the road. Some of the top-rated Pennzoil products in these categories are:
Synchromesh Manual Transmission Fluid: Low-Temperature
from $11.99
(104)
Synchromesh Manual Transmission Fluid: Low-Temperature
Differential Oil

FAQs for 1989 Chevrolet K1500 Drivetrains

What are the most purchased Drivetrains for the 1989 Chevrolet K1500?

Out of 480 Drivetrains for the 1989 Chevrolet K1500, the most popular in our inventory are:
Differential Cover Gasket
from $9.99
(195)
Differential Cover Gasket
Rear Housing Cover Gaskets
Universal Joint
from $15.99
(52)
Universal Joint
U-Joints

What are the top-rated 1989 Chevrolet K1500 Drivetrains?

Top-rated Drivetrains for your 1989 Chevrolet K1500 based on customer reviews/ratings are:
Universal Joint
from $15.99
(65)
Universal Joint
“Good price and exact fit”
CV Axle Shaft Assembly
from $141.99
(48)
CV Axle Shaft Assembly
“Fit prefect”
4WD Actuator, Front Axle
from $104.99
(47)
4WD Actuator, Front Axle
“Fits perfect and functions perfect.”