1989 Chevrolet Blazer Drive Shafts and Axles
More 1989 Chevrolet Blazer Drive Shafts and Axles
Find your specific 1989 Chevrolet Blazer original or aftermarket Drive Shafts and Axles below. Order your parts online and have delivered to your home or pick up in-store at Advance Auto.
Essential 1989 Chevrolet Blazer Drive Shafts and Axles
Yukon Gear – The Carrier Bearing Puller (Part No.56072)
from
$883.99
The Yukon carrier bearing Puller works with an impact gun to quickly and safely remove carrier bearings without damaging them. This unit comes with a handy bench top stand and works with up to one ton applications including Dana 70HD, Dana 80, 10.25″ & 10.5″ Ford, or GM & Chrysler 11.5″ differentials.
Product Features:
See More
Product Features:
- Carrier bearing puller
- Works with an impact gun to safely and easliy remove carrrier bearings
Anchor – Center Support Bearing Motor Mount: Center, 1 Piece (Part No.6035)
from
$13.49
Center support bearings or Carrier Support Bearings are used when the driveshaft is split into two sections. It serves as a junction on the drive shaft between the transmission and the differential allowing the driveshaft to flex, relieving stress on other drive line components. Each part is engineered and designed to OE Standards. Applicable to CHEV 58-02; GMC 55-02; INTL 57-02;. Please verify your application.
Product Features:
See More
Product Features:
- MAXIMUM VIBRATION DAMPENING: Rubber cushion is made of high grade rubber that ensures maximum dampening of vibration and the ability to absorb over loads.
- HEAVY GAUGE STEEL FRAME: The housing frame is made from heavy gauge steel with durability that extends the service life.
- READY TO INSTALL: Most center supports include a sealed bearing and dust shield and are ready to install.
- For Years: 1955-2002
- Weight approx: 2 Lbs
- BEARING ID / BORE: 1.1811 INCH / 30 MM
- CENTERLINE: 3.50 INCH / 89 MM
- MOUNT WIDTH: 1.50 INCH / 38 MM
- COMPLETE MOUNT
Anchor – Center Support Bearing Motor Mount: Center, 1 Piece (Part No.6027)
from
$5.29
Center support bearings or Carrier Support Bearings are used when the driveshaft is split into two sections. It serves as a junction on the drive shaft between the transmission and the differential allowing the driveshaft to flex, relieving stress on other drive line components. Each part is engineered and designed to OE Standards. Applicable to AUTOCAR 84-88; CHECKER 55-82; CHEV 60-12; DODGE 87-97; GMC 67-05; MACK 80-83; PTRB 65-83; WHGM 88-95; WHIT 81-88;. Please verify your application.
Product Features:
See More
Product Features:
- MAXIMUM VIBRATION DAMPENING: Rubber cushion is made of high grade rubber that ensures maximum dampening of vibration and the ability to absorb over loads.
- HEAVY GAUGE STEEL FRAME: The housing frame is made from heavy gauge steel with durability that extends the service life.
- READY TO INSTALL: Most center supports include a sealed bearing and dust shield and are ready to install.
- For Years: 1955-2012
- Weight approx: 1 Lbs
- CUSHION INSERT ONLY
- FOR COMPLETE MOUNT SEE PART 6056
Driveworks – Axle Repair Bearing (Part No.S-RP-6408)
from
$24.29
Value-priced bearing meets all cataloged application requirements.
Product Features:
See More
Product Features:
- Brand may vary by location
NTN – Wheel Bearing (Part No.K8000345509NTN)
from
$87.01
Wheel Bearing
Dorman – Help – Axle Shaft Lock Assortment (Part No.81050)
from
$6.49
This drive axle shaft lock C-clip is designed to match the fit and function of the original part on specified vehicles. Made of quality materials, it is engineered for reliable performance.
Product Features:
See More
Product Features:
- Direct replacement – this drive axle shaft lock C-clip matches the fit and function of the factory part on specified years, makes and models
- Ideal solution – this clip is a reliable replacement for an original part that is missing or has failed due to fatigue
- Durable construction – this part is made from quality materials to ensure reliable performance and long service life
- Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience
Yukon Gear – R1559Tv Rear Axle Bearing And Seal Kit (Part No.10001)
from
$52.99
Yukon axle bearing & seal kits are specially designed for each application & use all high quality bearings & seals. R1559TV axle bearing and seal kit, TorringtonBrand, 2.530″ OD, 1.620″ ID This axle bearing & seal kit services one side only.
Product Features:
See More
Product Features:
- Includes axle bearing and seal
- Services one side
- Torrington Brand
- 2.530″ O.D.
- 1.620″ I.D.
Yukon Gear – GM 7.5"/8.0"/8.5"/8.6" Rear Axle Bearing And Seal Kit (Part No.10005)
from
$89.99
Yukon axle bearing & seal kits are specially designed for each application & use all high quality bearings & seals. axle bearing and seal kit for C10 Aero truck, 2.800″ OD, 1.620″ ID. This axle bearing & seal kit services one side only.
Product Features:
See More
Product Features:
- Includes axle bearing and seal
- Services one side
- 2.800″ O.D.
- 1.620″ I.D.
Yukon Gear – Dana 44 Front Axle Bearing And Seal Kit Replacement (Part No.10022)
from
$121.99
Yukon axle bearing & seal kits are specially designed for each application & use all high quality bearings & seals. Replacement Axle bearing and seal kit for ’57 to ’77 Dana 44 and Chevy/GM 1/2 ton front axle. This kit includes Timken inner and outer bearings and races along with high quality seals. Unit is sold per side and is covered for one year against manufacturing defects. This axle bearing & seal kit services one side only.
Product Features:
See More
Product Features:
- Fits 1957-1977 GM 1/2 ton
- Includes axle bearings, races and seal
- Services one side
National – Multi Purpose Bearing (Part No.HB-206-FF)
from
$46.49
National Oil Seals & Bearings offer a full line of premium oil seals and bearings.
Product Features:
See More
Product Features:
- Premium bearing design matches OEM specifications
- Precision manufactured using premium-grade steel for outstanding durability and performance
- Controlled heat treating process for lasting performance and extended bearing life
- Industry leading coverage
- Professional technicians know they can depend on National
National – Multi Purpose Bearing (Part No.HB-88107-A)
from
$44.99
National Oil Seals & Bearings offer a full line of premium oil seals and bearings.
Product Features:
See More
Product Features:
- Premium bearing design matches OEM specifications
- Precision manufactured using premium-grade steel for outstanding durability and performance
- Controlled heat treating process for lasting performance and extended bearing life
- Industry leading coverage
- Professional technicians know they can depend on National
Driveworks – Ball Bearing (Part No.S-HB-88107-A)
Pro-King – Differential Axle Seal (Part No.742A074)
from
$6.99
Pro-King is the leading supplier of transmission and driveline products in the aftermarket.
Product Features:
See More
Product Features:
- All products are designed to meet or exceed OE quality, form, fit and funtion.
Driveworks – Oil Seal (Part No.S-5131)
from
$9.79
Value-priced seal meets all cataloged application requirements.
Product Features:
See More
Product Features:
- Brand may vary by location
SKF – Axle Seal (Part No.K4021403278SKF)
from
$25.21
Axle Seal
Yukon Gear – C/Clip (Part No.33083)
from
$8.99
C/Clip for Chrysler 8.25″, Ford 7.5″, 8.8″, GM 12 bolt car & truck, 8.2″, 8.5″ & 8.6″.
Product Features:
See More
Product Features:
- c-clip for Chrysler 8.25″, Ford 8.8″, GM 12 bolt car and truck and GM 8.2″, 8.5″ and 8.6″
- .150″ thick
Spicer – Universal Joint (Part No.5-153X)
from
$28.99
When you see the Spicer name, you know you are buying the highest quality product available. Spicer universal joints are no exception. Dana manufactures a full line of Spicer universal joints that are engineered to ensure longer life for vehicles.
See More
Spicer – Axle Shft Univ Joint (Part No.5-3226X)
from
$47.99
Axle Shft Univ Joint
Spicer – Universal Joint (Part No.5-760X)
from
$51.99
When you see the Spicer name, you know you are buying the highest quality product available. Spicer universal joints are no exception. Dana manufactures a full line of Spicer universal joints that are engineered to ensure longer life for vehicles.
See More
Spicer – SPICER U-JOINT (Part No.5-1310-1X)
from
$44.99
SPICER U-JOINT
Cardone – Rear Drive Shaft: Greasable, Direct Replacement (Part No.65-9501)
from
$365.99
CARDONE Remanufactured Prop Shafts are engineered using the most stringent quality processes to deliver smooth, consistent performance in any driving condition. Original designs are scrutinized for potential improvement, and where applicable, design upgrades are implemented to produce a more durable part than the original. All critical components are tested to ensure proper function. Additionally, all CARDONE Prop Shafts are 100% dynamically balanced, resulting in vibration-free performance at all speeds.
Product Features:
See More
Product Features:
- Built to match O.E. form, fit and function.
- 100% NEW universal joints are installed to ensure proper fit and optimal performance.
- All slip yokes are lubricated to prevent premature wear.
- Units are 100% dynamically balanced at 3200 RPMs for vibration-free operation and increased joint life.
Dorman – Front Drive Shaft: Greaseable, Adjustable (Part No.938-246)
from
$741.99
Replacing a drive shaft doesn’t have to be complicated. This complete drive shaft assembly is pre-balanced and ready to install with 100% new yokes, tubes, constant velocity (CV) joints and universal joints.
Product Features:
See More
Product Features:
- Direct replacement – this drive shaft is made to the original equipment dimensions for dependable fit and performance
- 100% new – this drive shaft is made from all new components so there’s no core charge or return hassle
- Ready to install – this drive shaft arrives pre-balanced to make installation quick and simple
- Serviceable construction – non-staked universal joints are designed for future serviceability
Dorman – Rear Drive Shaft: Greaseable (Part No.976-900)
from
$794.99
Replacing a drive shaft doesn’t have to be complicated. This complete drive shaft assembly is pre-balanced and ready to install with 100% new yokes, tubes, constant velocity (CV) joints and universal joints.
Product Features:
See More
Product Features:
- Direct replacement – this drive shaft is made to the original equipment dimensions for dependable fit and performance
- 100% new – this drive shaft is made from all new components so there’s no core charge or return hassle
- Ready to install – this drive shaft arrives pre-balanced to make installation quick and simple
- Serviceable construction – non-staked universal joints are designed for future serviceability
Cardone – Front Drive Shaft: Not Greasable, Direct Replacement (Part No.65-9339)
from
$438.99
CARDONE Remanufactured Prop Shafts are engineered using the most stringent quality processes to deliver smooth, consistent performance in any driving condition. Original designs are scrutinized for potential improvement, and where applicable, design upgrades are implemented to produce a more durable part than the original. All critical components are tested to ensure proper function. Additionally, all CARDONE Prop Shafts are 100% dynamically balanced, resulting in vibration-free performance at all speeds.
Product Features:
See More
Product Features:
- Built to match O.E. form, fit and function.
- 100% NEW universal joints are installed to ensure proper fit and optimal performance.
- All slip yokes are lubricated to prevent premature wear.
- Units are 100% dynamically balanced at 3200 RPMs for vibration-free operation and increased joint life.
National – Bearings (Part No.207-L)
from
$32.99
National Oil Seals & Bearings offer a full line of premium oil seals and bearings.
Product Features:
See More
Product Features:
- Premium bearing design matches OEM specifications
- Precision manufactured using premium-grade steel for outstanding durability and performance
- Controlled heat treating process for lasting performance and extended bearing life
- Industry leading coverage
- Professional technicians know they can depend on National
National – Bearings (Part No.N-1211-L)
from
$94.99
National Oil Seals & Bearings offer a full line of premium oil seals and bearings.
Product Features:
See More
Product Features:
- Premium bearing design matches OEM specifications
- Precision manufactured using premium-grade steel for outstanding durability and performance
- Controlled heat treating process for lasting performance and extended bearing life
- Industry leading coverage
- Professional technicians know they can depend on National
National – Bearings (Part No.M802011)
from
$14.79
National Oil Seals & Bearings offer a full line of premium oil seals and bearings.
Product Features:
See More
Product Features:
- Premium bearing design matches OEM specifications
- Precision manufactured using premium-grade steel for outstanding durability and performance
- Crowned raceways and rollers to ensure even load distribution for maximum life
- Industry leading coverage
- Professional technicians know they can depend on National
National – Taper Bearing Cup (Part No.14276)
from
$10.99
Manufactured with premium-grade steel, National® taper bearing cups feature crowned raceways to ensure even load distribution.
Product Features:
See More
Product Features:
- PREMIUM MATERIALS — Precision manufactured using premium-grade steel for outstanding durability and performance
- SMOOTH ROTATION — Crowned raceways for even load distribution
- OE-STYLE DESIGN — Engineered to meet OE specifications
- COMPREHENSIVE COVERAGE — Industry-leading coverage for domestic and import applications
- RIGOROUS TESTING+–+Comprehensive+testing throughout design and development processes by National engineers for quality you can count on+
Popular 1989 Chevrolet Blazer Drive Shafts and Axles Categories
1989 Chevrolet Blazer Drive Shafts and Axles
Maybe you’re in the middle of a full rebuild of that 1989 Chevrolet Blazer. Maybe you just need a couple of Drive Shafts and Axles. Either way, Advance Auto Parts has 37 different Drive Shafts and Axles in our inventory ranging from $1.99 to $883.99. That means you can find the exact parts or products you need to keep that 1989 Chevrolet Blazer running smoothly.
Drive Shafts and Axles are only as good as their brand. We stock 12 different brands to make sure you have plenty of trusted parts to choose from for your 1989 Chevrolet Blazer. Spicer, National, and Anchor are just some of the brands we stock. Search for brands you know or compare prices and reviews to help you decide!
We know you’ll find the perfect Drive Shafts and Axles for your 1989 Chevrolet Blazer, but don’t take our word for it – read our customer ratings and reviews and buy with confidence. Out of the 262 reviews in this category, some of the top rated parts include Bearings with 5.0 stars and Axle Shaft Lock Assortment with 4.3 stars.
So if you’re in the market for aftermarket Drive Shafts and Axles to keep your 1989 Chevrolet Blazer rolling for years to come, look no further. Shop online and have your products shipped direct to your door, or pick up at the nearest Advance Auto Parts location today!
Drive Shafts and Axles Brands To Make Your 1989 Chevrolet Blazer Last
Simple repair, complete replacement, or a full rebuild. No matter the job, your 1989 Chevrolet Blazer demands trusted brand parts and products to keep it running. Many trusted brands of Drive Shafts and Axles make up Advance Auto Parts’ inventory, and all are ready to help make your Blazer the best it can be. Be sure to browse some of our top Drive Shafts and Axles brands and parts.
Popular Spicer Drive Shafts and Axles
We carry Spicer parts in our stock across Axle Shaft Universal Joints categories, plus more. For a 1989 Chevrolet Blazer, our most popular Spicer Drive Shafts and Axles include:
Top 1989 Chevrolet Blazer Drive Shafts and Axles from National
National products are another trusted brand when it comes to Drive Shafts and Axles for your 1989 Chevrolet Blazer. Popular National parts include:
FAQs for 1989 Chevrolet Blazer Drive Shafts and Axles
What are the most purchased Drive Shafts and Axles for the 1989 Chevrolet Blazer?
Out of 37 Drive Shafts and Axles for the 1989 Chevrolet Blazer, the most popular in our inventory are:
What are the top-rated 1989 Chevrolet Blazer Drive Shafts and Axles?
Top-rated Drive Shafts and Axles for your 1989 Chevrolet Blazer based on customer reviews/ratings are:
from
$6.49
(3)
Axle Shaft Lock Assortment
“Lucky for me they had it in stock. Parts man was excellent”
