1989 BMW 735i Drivetrains

Essential Drivetrains for 1989 BMW 735is

Febi – Axle Shaft Nut (Part No.K403024787FEB)

Axle Shaft Nut

from

$27.27
The Febi Axle Shaft Nut is an ideal high quality aftermarket replacement that is manufactured to meet or exceed OE specifications for fit, form, and function.

Product Features:
  • Premium aftermarket replacement
  • Provides performance and dependability
  • Manufactured to meet OE specifications
See More

GKN Drivetech – CV Boot Kit (Part No.K601078258LOB)

CV Boot Kit

from

$76.26
With Clamps and Grease SPIDAN and LOBRO boots are specifically developed for the various joints – their accurate fit ensures optimum sealing of the joint. Up-to-date computerized equipment is used for the production of the boot. SPIDAN and LOBRO boot kits contain all the individual parts needed for professional repairs: boot, boot circlips, tightening straps, bolts, nuts, spacers, etc.

Product Features:
  • For every specific application a boot kit to the OES standard
  • Reliable protection against damp and dirt
  • Optimum sealing and abrasion resistance
  • Manufactured according to DIN EN ISO 9001:2000
See More

Rein – Drive Shaft-Ctr Support Bearng (Part No.BEM0039P)

Drive Shaft-Ctr Support Bearng

from

$13.99
Drive Shaft-Ctr Support Bearng

Rare Parts – Control Arm Bushing (Part No.RP19361)

Control Arm Bushing

from

$85.99
This high quality chassis part will improve overall vehicle handling, reduce tire wear and increase the life of other steering and suspension components. These chassis parts are manufactured to meet or exceed OEM.

Product Features:
  • Reduces vibration
  • Torsional rubber bushings
  • UV resistant
  • No Squeak
See More

SKF – Wheel Bearing (Part No.K800023845SKF)

Wheel Bearing

from

$80.32
SKF is a supplier of original equipment wheel bearings, hubs and seals to most of the world’s leading automakers. Engineered and manufactured to the highest quality standards, SKF wheel bearings greatly reduce friction and increase load-carrying capabilities. With an ability to boost reliability under heavy loads and misaligned conditions, SKF wheel bearings offer an ideal solution for many wheel end applications.

Product Features:
  • Precision bearing pre-load and correct application of advanced manufacturing techniques such as orbital rolling
  • 100% tested to the actual OE specifications per part number for fit, form and function
  • High quality steel and surface finishes
  • Proper implementation of heat treatment
See More

National – Shaft Repair Sleeve (Part No.99157)

Shaft Repair Sleeve

from

$37.49
National® has built a reputation as one of the most respected names in the industry. We have offered premium sealing solutions for more than 75 years. Our design team keeps pace with the industry and provides advanced solutions for today’s vehicles.

Product Features:
  • Designed to repair damaged, grooved or worn shafts
  • Durable stainless steel construction for corrosion-free sealing surface that surpasses most original shaft specifications
  • Ideal for a shaft where indications of seal wear, such as tracks or grooves have developed
  • Ultra-thin construction (0.01/0.25mm wall thickness) allows original seal size to be used with minimal additional lip loading
  • Easy to install with removable flange and installation tool
  • Installation tool reduces sleeve distortion and allows for installation without removal from the shaft
See More

Febi – Subframe Bushing (Part No.L102078247FEB)

Subframe Bushing

from

$19.26
The Febi subframe bushing is OE Quality and is manufactured using only the highest quality materials and is designed to reduce road noise and vibration.

Product Features:
  • OE-Equivalent and direct fit application
  • Reduces squeaks, rattles, and vibration noise
  • Resistant to oil and other contaminants
  • Meets or exceeds OEM specifications
See More

Corteco – Input Shaft Seal (Part No.J1156750991CFW)

Input Shaft Seal

from

$11.86
Input Shaft Seal

FAG US – SHAFT SEAL (Part No.SS2835)

SHAFT SEAL

from

$15.99
SHAFT SEAL

National – Bearings (Part No.HM89449)

Bearings

from

$25.49
National Oil Seals & Bearings offer a full line of premium oil seals and bearings.

Product Features:
  • Premium bearing design matches OEM specifications
  • Precision manufactured using premium-grade steel for outstanding durability and performance
  • Crowned raceways and rollers to ensure even load distribution for maximum life
  • Industry leading coverage
  • Professional technicians know they can depend on National
See More

Driveworks – Camshaft Seal (Part No.S-99139)

Camshaft Seal

from

$23.99
Product Features:
  • Brand may vary by location
See More

Corteco – Diff. Side Cover Sea (Part No.J7041108125CFW)

Diff. Side Cover Sea

from

$15.00
Diff. Side Cover Sea

Autopart International Inc – Driveshaft Flex Join (Part No.K10201916859API)

Driveshaft Flex Join

from

$84.76
Driveshaft Flex Join

National – Shaft Repair Sleeve (Part No.99139)

Shaft Repair Sleeve

from

$39.99
National® has built a reputation as one of the most respected names in the industry. We have offered premium sealing solutions for more than 75 years. Our design team keeps pace with the industry and provides advanced solutions for today’s vehicles.

Product Features:
  • Designed to repair damaged, grooved or worn shafts
  • Durable stainless steel construction for corrosion-free sealing surface that surpasses most original shaft specifications
  • Ideal for a shaft where indications of seal wear, such as tracks or grooves have developed
  • Ultra-thin construction (0.01/0.25mm wall thickness) allows original seal size to be used with minimal additional lip loading
  • Easy to install with removable flange and installation tool
  • Installation tool reduces sleeve distortion and allows for installation without removal from the shaft
See More

Rein – Drive Shaft Mount Assembly (Part No.AVS0052R)

Drive Shaft Mount Assembly

from

$40.99
Anti-vibration parts dampen vibration harmonics from the engine and drive line components to rest of the vehicle. This in turn reduces vibration and noise which can be felt and heard while the vehicle is in operation. Rein Automotive anti-vibration parts are application specific and match the design and function of the OE parts

Product Features:
  • Produced by an Original Equipment supplier
  • Manufactured to strict engineering standards/specifications in materials and tolerances
  • All bearings included are produced by an OE manufacturer ensuring the highest quality and performance
  • All driveshaft mount assemblies come with the bearing pre-installed ensuring proper bearing alignment, reducing installation time
  • Rubber components match the shore hardness of the original equipment mount to ensure maximum performance and product longevity
See More

Rein – Drive Shaft Mount Assembly (Part No.AVS0053R)

Drive Shaft Mount Assembly

from

$44.99
Anti-vibration parts dampen vibration harmonics from the engine and drive line components to rest of the vehicle. This in turn reduces vibration and noise which can be felt and heard while the vehicle is in operation. Rein Automotive anti-vibration parts are application specific and match the design and function of the OE parts

Product Features:
  • Produced by an Original Equipment supplier
  • Manufactured to strict engineering standards/specifications in materials and tolerances
  • All bearings included are produced by an OE manufacturer ensuring the highest quality and performance
  • All driveshaft mount assemblies come with the bearing pre-installed ensuring proper bearing alignment, reducing installation time
  • Rubber components match the shore hardness of the original equipment mount to ensure maximum performance and product longevity
See More

Dorman – Rear Drive Shaft: Adjustable (Part No.976-539)

Rear Drive Shaft: Adjustable

from

$1145.99
Replacing a drive shaft doesn’t have to be complicated. This complete drive shaft assembly is pre-balanced and ready to install with 100% new yokes, tubes, constant velocity (CV) joints and universal joints.

Product Features:
  • Direct replacement – this drive shaft is made to the original equipment dimensions for dependable fit and performance.
  • 100% new – this drive shaft is made from all new components so there’s no core charge or return hassle.
  • Ready to install – this drive shaft arrives pre-balanced to make installation quick and simple
  • Serviceable construction – non-staked universal joints are designed for future serviceability
See More

Dorman – Rear Drive Shaft: OE Fix (Part No.936-373)

Rear Drive Shaft: OE Fix

from

$684.99
The original drive shafts on specific vehicles have permanently staked universal joints that make servicing difficult. This Dorman OE FIX rear drive shaft makes the U-joints serviceable for simpler maintenance. Every Dorman part is backed by over 100 years of experience, along with a dedicated team of product experts, automotive engineers and technical support specialists based in the United States. We are passionate about giving repair professionals and vehicle owners greater freedom to fix cars and trucks, which is why we have more than 100,000 parts in our catalog today and promise to never stop driving new solutions.

Product Features:
  • Rear Driveshaft Assembly.
  • Rear Drive Shaft: OE Fix.
  • Ready to install – this drive shaft is shipped pre-assembled and factory balanced to ensure immediate smooth operation
  • Simplifies repair – this replacement makes the U-joints serviceable for simpler maintenance
See More

Dorman – Driveshaft Flex Coupler (Part No.935-403)

Driveshaft Flex Coupler

from

$55.99
This drive shaft coupler is designed to match the fit and function of the original coupler on specified vehicles, and is engineered for durability and reliable performance.

Product Features:
  • Direct replacement – this drive shaft coupler is designed to match the fit and function of the original coupler on specified vehicles.
  • Restores functionality – reliable replacement for an original coupler that has failed due to wear or damaged due to collision.
  • Durable construction – this part is made from quality materials to ensure reliable performance and long service life
  • Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience
See More

Febi – Drive Shaft Flex Joint (Guibo) (Part No.K102046068FEB)

Drive Shaft Flex Joint (Guibo)

from

$147.68
The OE quality Febi flex joint is made of high quality rubber and is reinforced with advanced fiber materials. The manufacturer recommends the flex disc be replaced whenever the clutch components are being replaced. TECH TIP : Flex discs have an alignment or triangle arrow formed into the rubber. The pointed end must face the mounting flange on the transmission when installed to ensure longevity.

Product Features:
  • OE quality, fit and performance
  • High quality rubber
  • Reinforced with advanced materials
  • Excellent vibration control
See More

Dorman – OE Solutions Driveshaft Flex Joint Coupler (Part No.K1006720047DOR)

OE Solutions Driveshaft Flex Joint Coupler

from

$92.53
Restore a smooth ride and easy acceleration with Dorman’s Driveshaft Coupler. Engineered from high-quality rubber for long-lasting service, it effectively absorbs and reduces vibration between the driveshaft and transmission or transfer case. Plus, depending on the application, all installation hardware is included for a complete repair.

Product Features:
  • Direct replacement and direct fit Drive Shaft Couplers available (where applicable) for ease of replacement
  • Comes with bolts and washers (where applicable)
  • Easy to install
  • Rigorous quality control measures have been undertaken to ensure that this part conforms to product standards
See More

Corteco – Driveshaft Bushing (Part No.K1050292291CFW)

Driveshaft Bushing

from

$13.03
The Corteco Driveshaft Bushing is an ideal high quality Original Equipment replacement that is manufactured to meet or exceed OE specifications for fit, form, and function.

Product Features:
  • Premium Original Equipment replacement
  • Provides performance and dependability
  • Manufactured to meet OE specifications
See More

National – Shaft Repair Sleeve (Part No.99177)

Shaft Repair Sleeve

from

$39.49
National® has built a reputation as one of the most respected names in the industry. We have offered premium sealing solutions for more than 75 years. Our design team keeps pace with the industry and provides advanced solutions for today’s vehicles.

Product Features:
  • Designed to repair damaged, grooved or worn shafts
  • Durable stainless steel construction for corrosion-free sealing surface that surpasses most original shaft specifications
  • Ideal for a shaft where indications of seal wear, such as tracks or grooves have developed
  • Ultra-thin construction (0.01/0.25mm wall thickness) allows original seal size to be used with minimal additional lip loading
  • Easy to install with removable flange and installation tool
  • Installation tool reduces sleeve distortion and allows for installation without removal from the shaft
See More

FAG US – CONE (Part No.KL68149)

CONE

from

$13.99
CONE

National – Shaft Repair Sleeve (Part No.99166)

Shaft Repair Sleeve

from

$34.99
National® has built a reputation as one of the most respected names in the industry. We have offered premium sealing solutions for more than 75 years. Our design team keeps pace with the industry and provides advanced solutions for today’s vehicles.

Product Features:
  • Designed to repair damaged, grooved or worn shafts
  • Durable stainless steel construction for corrosion-free sealing surface that surpasses most original shaft specifications
  • Ideal for a shaft where indications of seal wear, such as tracks or grooves have developed
  • Ultra-thin construction (0.01/0.25mm wall thickness) allows original seal size to be used with minimal additional lip loading
  • Easy to install with removable flange and installation tool
  • Installation tool reduces sleeve distortion and allows for installation without removal from the shaft
See More

Upgrade your 1989 BMW 735i with Top-Quality Drivetrains

When it comes to maintaining or upgrading your 1989 BMW 735i, nothing is more important than using high-quality OEM or aftermarket parts that you can trust. Whether you’re repairing damage to your BMW or enhancing its overall performance, Drivetrains are key to keeping your 735i functioning at its best. At Advance Auto Parts, we offer a wide selection of 39 Drivetrains for the 1989 BMW 735i, designed to meet your needs without breaking the bank. From Drive Shafts and Axle replacements to Differentials upgrades, we’ve got you covered with parts that fit your vehicle perfectly and ensure long-lasting performance.

Affordable Prices and Wide Selection

Shopping for Drivetrains for any vehicle can be a hassle, especially if you’re on a budget. But with Advance Auto Parts, you can find high-quality Drivetrains for your 1989 BMW 735i at great prices. Our Drivetrains inventory for this model ranges from just $4.99 to $951.99, with an average price of $59.25. Our 39 Drivetrains in stock come from 12 trusted brands, so you’re sure to find the right part for your 1989 BMW 735i without overspending.

Top Brands and High Customer Satisfaction

Advance Auto Parts takes pride in offering only the best brands in the automotive industry. For your 1989 BMW 735i, we stock popular OEM and aftermarket Drivetrains from top names like Dorman National, and more. Dorman Drivetrains start at just $23.99 and boast an impressive 4 stars average rating from customers. With 48 customer reviews and counting, our 1989 BMW 735i Drivetrains have a strong track record of reliability, ensuring you can trust your purchase.

Explore Related Parts and More

While you’re here, don’t forget to check out other essential categories that go hand in hand with Drivetrain upgrades. Explore related part types like Batteries and Chargers, Oil and Lubricants and more to make sure your 1989 BMW 735i is always ready to roll. We’re committed to providing you with everything you need to keep your 735i in top shape, all in one place. Start shopping confidently below for your 1989 BMW 735i!

Best-Selling Drive Shafts and Axles for 1989 BMW 735is

Enhance the driving experience in your BMW with 14 quality Drive Shafts and Axle components, starting at $13.03.

National – Shaft Repair Sleeve (Part No.99177)

Shaft Repair Sleeve

from

$39.49
National® has built a reputation as one of the most respected names in the industry. We have offered premium sealing solutions for more than 75 years. Our design team keeps pace with the industry and provides advanced solutions for today’s vehicles.

Product Features:
  • Designed to repair damaged, grooved or worn shafts
  • Durable stainless steel construction for corrosion-free sealing surface that surpasses most original shaft specifications
  • Ideal for a shaft where indications of seal wear, such as tracks or grooves have developed
  • Ultra-thin construction (0.01/0.25mm wall thickness) allows original seal size to be used with minimal additional lip loading
  • Easy to install with removable flange and installation tool
  • Installation tool reduces sleeve distortion and allows for installation without removal from the shaft
See More

Dorman – Driveshaft Flex Coupler (Part No.935-403)

Driveshaft Flex Coupler

from

$55.99
This drive shaft coupler is designed to match the fit and function of the original coupler on specified vehicles, and is engineered for durability and reliable performance.

Product Features:
  • Direct replacement – this drive shaft coupler is designed to match the fit and function of the original coupler on specified vehicles.
  • Restores functionality – reliable replacement for an original coupler that has failed due to wear or damaged due to collision.
  • Durable construction – this part is made from quality materials to ensure reliable performance and long service life
  • Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience
See More

National – Bearings (Part No.106-CC)

Bearings

from

$41.49
National Oil Seals & Bearings offer a full line of premium oil seals and bearings.

Product Features:
  • Premium bearing design matches OEM specifications
  • Precision manufactured using premium-grade steel for outstanding durability and performance
  • Controlled heat treating process for lasting performance and extended bearing life
  • Industry leading coverage
  • Professional technicians know they can depend on National
See More

National – Shaft Repair Sleeve (Part No.99166)

Shaft Repair Sleeve

from

$34.99
National® has built a reputation as one of the most respected names in the industry. We have offered premium sealing solutions for more than 75 years. Our design team keeps pace with the industry and provides advanced solutions for today’s vehicles.

Product Features:
  • Designed to repair damaged, grooved or worn shafts
  • Durable stainless steel construction for corrosion-free sealing surface that surpasses most original shaft specifications
  • Ideal for a shaft where indications of seal wear, such as tracks or grooves have developed
  • Ultra-thin construction (0.01/0.25mm wall thickness) allows original seal size to be used with minimal additional lip loading
  • Easy to install with removable flange and installation tool
  • Installation tool reduces sleeve distortion and allows for installation without removal from the shaft
See More

Dorman – OE Solutions Driveshaft Flex Joint Coupler (Part No.K1006720047DOR)

OE Solutions Driveshaft Flex Joint Coupler

from

$92.53
Restore a smooth ride and easy acceleration with Dorman’s Driveshaft Coupler. Engineered from high-quality rubber for long-lasting service, it effectively absorbs and reduces vibration between the driveshaft and transmission or transfer case. Plus, depending on the application, all installation hardware is included for a complete repair.

Product Features:
  • Direct replacement and direct fit Drive Shaft Couplers available (where applicable) for ease of replacement
  • Comes with bolts and washers (where applicable)
  • Easy to install
  • Rigorous quality control measures have been undertaken to ensure that this part conforms to product standards
See More

Rein – Drive Shaft-Ctr Support Bearng (Part No.BEM0039P)

Drive Shaft-Ctr Support Bearng

from

$13.99
Drive Shaft-Ctr Support Bearng

Dorman – Rear Drive Shaft: Adjustable (Part No.946-974)

Rear Drive Shaft: Adjustable

from

$951.99
Replacing a drive shaft doesn’t have to be complicated. This complete drive shaft assembly is pre-balanced and ready to install with 100% new yokes, tubes, constant velocity (CV) joints and universal joints.

Product Features:
  • Direct replacement – this drive shaft is made to the original equipment dimensions for dependable fit and performance.
  • 100% new – this drive shaft is made from all new components so there’s no core charge or return hassle.
  • Ready to install – this drive shaft arrives pre-balanced to make installation quick and simple
  • Serviceable construction – non-staked universal joints are designed for future serviceability
See More

Rare Parts – Differential Support Bushing (Part No.RP17329)

Differential Support Bushing

from

$128.99
This high quality chassis part will improve overall vehicle handling, reduce tire wear and increase the life of other steering and suspension components. These chassis parts are manufactured to meet or exceed OEM.

Product Features:
  • Reduces vibration
  • UV resistant
  • Natural rubber
  • No Squeak
See More

Rare Parts – Control Arm Bushing (Part No.RP19361)

Control Arm Bushing

from

$85.99
This high quality chassis part will improve overall vehicle handling, reduce tire wear and increase the life of other steering and suspension components. These chassis parts are manufactured to meet or exceed OEM.

Product Features:
  • Reduces vibration
  • Torsional rubber bushings
  • UV resistant
  • No Squeak
See More

Autopart International Inc – Driveshaft Flex Join (Part No.K10201916859API)

Driveshaft Flex Join

from

$84.76
Driveshaft Flex Join

Rein – Drive Shaft Mount Assembly (Part No.AVS0053R)

Drive Shaft Mount Assembly

from

$44.99
Anti-vibration parts dampen vibration harmonics from the engine and drive line components to rest of the vehicle. This in turn reduces vibration and noise which can be felt and heard while the vehicle is in operation. Rein Automotive anti-vibration parts are application specific and match the design and function of the OE parts

Product Features:
  • Produced by an Original Equipment supplier
  • Manufactured to strict engineering standards/specifications in materials and tolerances
  • All bearings included are produced by an OE manufacturer ensuring the highest quality and performance
  • All driveshaft mount assemblies come with the bearing pre-installed ensuring proper bearing alignment, reducing installation time
  • Rubber components match the shore hardness of the original equipment mount to ensure maximum performance and product longevity
See More

Febi – Axle Shaft Nut (Part No.K403024787FEB)

Axle Shaft Nut

from

$27.27
The Febi Axle Shaft Nut is an ideal high quality aftermarket replacement that is manufactured to meet or exceed OE specifications for fit, form, and function.

Product Features:
  • Premium aftermarket replacement
  • Provides performance and dependability
  • Manufactured to meet OE specifications
See More

FAG US – BEARING (Part No.6006-2RSR)

BEARING

from

$15.49
BEARING

Corteco – Driveshaft Bushing (Part No.K1050292291CFW)

Driveshaft Bushing

from

$13.03
The Corteco Driveshaft Bushing is an ideal high quality Original Equipment replacement that is manufactured to meet or exceed OE specifications for fit, form, and function.

Product Features:
  • Premium Original Equipment replacement
  • Provides performance and dependability
  • Manufactured to meet OE specifications
See More

Most Popular 1989 BMW 735i Differentials

Customize your BMW with 20 Differentials products like Differential Bearings, Differential Pinion Seals, and Front Differential Pinion Bearings, all priced under $80.32.

National – Shaft Repair Sleeve (Part No.99139)

Shaft Repair Sleeve

from

$39.99
National® has built a reputation as one of the most respected names in the industry. We have offered premium sealing solutions for more than 75 years. Our design team keeps pace with the industry and provides advanced solutions for today’s vehicles.

Product Features:
  • Designed to repair damaged, grooved or worn shafts
  • Durable stainless steel construction for corrosion-free sealing surface that surpasses most original shaft specifications
  • Ideal for a shaft where indications of seal wear, such as tracks or grooves have developed
  • Ultra-thin construction (0.01/0.25mm wall thickness) allows original seal size to be used with minimal additional lip loading
  • Easy to install with removable flange and installation tool
  • Installation tool reduces sleeve distortion and allows for installation without removal from the shaft
See More

National – Bearings (Part No.HM89449)

Bearings

from

$25.49
National Oil Seals & Bearings offer a full line of premium oil seals and bearings.

Product Features:
  • Premium bearing design matches OEM specifications
  • Precision manufactured using premium-grade steel for outstanding durability and performance
  • Crowned raceways and rollers to ensure even load distribution for maximum life
  • Industry leading coverage
  • Professional technicians know they can depend on National
See More

National – Shaft Repair Sleeve (Part No.99157)

Shaft Repair Sleeve

from

$37.49
National® has built a reputation as one of the most respected names in the industry. We have offered premium sealing solutions for more than 75 years. Our design team keeps pace with the industry and provides advanced solutions for today’s vehicles.

Product Features:
  • Designed to repair damaged, grooved or worn shafts
  • Durable stainless steel construction for corrosion-free sealing surface that surpasses most original shaft specifications
  • Ideal for a shaft where indications of seal wear, such as tracks or grooves have developed
  • Ultra-thin construction (0.01/0.25mm wall thickness) allows original seal size to be used with minimal additional lip loading
  • Easy to install with removable flange and installation tool
  • Installation tool reduces sleeve distortion and allows for installation without removal from the shaft
See More

National – Bearings (Part No.HM88542)

Bearings

from

$22.99
National Oil Seals & Bearings offer a full line of premium oil seals and bearings.

Product Features:
  • Premium bearing design matches OEM specifications
  • Precision manufactured using premium-grade steel for outstanding durability and performance
  • Crowned raceways and rollers to ensure even load distribution for maximum life
  • Industry leading coverage
  • Professional technicians know they can depend on National
See More

National – Bearings (Part No.HM88510)

Bearings

from

$14.29
National Oil Seals & Bearings offer a full line of premium oil seals and bearings.

Product Features:
  • Premium bearing design matches OEM specifications
  • Precision manufactured using premium-grade steel for outstanding durability and performance
  • Crowned raceways and rollers to ensure even load distribution for maximum life
  • Industry leading coverage
  • Professional technicians know they can depend on National
See More

National – Bearings (Part No.HM89410)

Bearings

from

$11.49
National Oil Seals & Bearings offer a full line of premium oil seals and bearings.

Product Features:
  • Premium bearing design matches OEM specifications
  • Precision manufactured using premium-grade steel for outstanding durability and performance
  • Crowned raceways and rollers to ensure even load distribution for maximum life
  • Industry leading coverage
  • Professional technicians know they can depend on National
See More

Driveworks – Tapered Roller Bearing (Part No.S-HM-89410)

Tapered Roller Bearing

from

$4.99
Product Features:
  • Brand may vary by location
See More

SKF – Wheel Bearing (Part No.K800023845SKF)

Wheel Bearing

from

$80.32
SKF is a supplier of original equipment wheel bearings, hubs and seals to most of the world’s leading automakers. Engineered and manufactured to the highest quality standards, SKF wheel bearings greatly reduce friction and increase load-carrying capabilities. With an ability to boost reliability under heavy loads and misaligned conditions, SKF wheel bearings offer an ideal solution for many wheel end applications.

Product Features:
  • Precision bearing pre-load and correct application of advanced manufacturing techniques such as orbital rolling
  • 100% tested to the actual OE specifications per part number for fit, form and function
  • High quality steel and surface finishes
  • Proper implementation of heat treatment
See More

SKF – Differential Pinion Bearing (Part No.J7020289131SKF)

Differential Pinion Bearing

from

$70.44
Differential Pinion Bearing

SKF – Differential Pinion Bearing (Part No.J7020289132SKF)

Differential Pinion Bearing

from

$59.59
Differential Pinion Bearing

FAG US – TAPERED ROLLER BEARI (Part No.KT45)

TAPERED ROLLER BEARI

from

$24.29
TAPERED ROLLER BEARI

Driveworks – Camshaft Seal (Part No.S-99139)

Camshaft Seal

from

$23.99
Product Features:
  • Brand may vary by location
See More

Febi – Subframe Bushing (Part No.L102078247FEB)

Subframe Bushing

from

$19.26
The Febi subframe bushing is OE Quality and is manufactured using only the highest quality materials and is designed to reduce road noise and vibration.

Product Features:
  • OE-Equivalent and direct fit application
  • Reduces squeaks, rattles, and vibration noise
  • Resistant to oil and other contaminants
  • Meets or exceeds OEM specifications
See More

Driveworks – Tapered Roller Bearing (Part No.S-HM-88542)

Tapered Roller Bearing

from

$16.49
Product Features:
  • Brand may vary by location
See More

FAG US – SHAFT SEAL (Part No.SS2835)

SHAFT SEAL

from

$15.99
SHAFT SEAL

Corteco – Diff. Side Cover Sea (Part No.J7041108125CFW)

Diff. Side Cover Sea

from

$15.00
Diff. Side Cover Sea

Driveworks – Tapered Roller Bearing (Part No.S-HM-88510)

Tapered Roller Bearing

from

$10.29
Product Features:
  • Brand may vary by location
See More

FAG US – CUP (Part No.LM501310)

CUP

from

$9.99
CUP

Corteco – Pinion Seal (Part No.J7010481192CFW)

Pinion Seal

from

$8.45
Pinion Seal

CRP – Diff. Side Cover O-R (Part No.J7042319785CRP)

Diff. Side Cover O-R

from

$5.68
Diff. Side Cover O-R

Top Picks for 1989 BMW 735i CV Axles and Joints

Upgrade BMW 735is with top-quality CV Axles and Joints parts, including 3 OEM and aftermarket selections for your 1989 model.

Dorman – Uni-Fit C.V. Joint Boot Kit Outer up to 3.58 In. Diameter (Part No.614-001)

Uni-Fit C.V. Joint Boot Kit Outer up to 3.58 In. Diameter

from

$29.49
This CV joint boot kit contains the parts required to repair the CV joint on specified vehicles without removing the joint itself. Made of quality components, this kit is engineered for reliable performance and durability.

Product Features:
  • Direct replacement – this CV joint boot kit contains the parts required to repair the CV joint on specified vehicles without removing the joint itself.
  • Ideal solution – this kit is a reliable replacement for original components that have failed due to wear.
  • Durable construction – this kit is made from quality components to ensure reliable performance and a long service life
  • Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience
See More

Dorman – Help – Universal C.V. Joint Boot Kit Front Outer (Part No.03680)

Universal C.V. Joint Boot Kit Front Outer

from

$23.99
Our CV Joint Boots provide various methods of eliminating the removal of the CV joint during installation. Uni-Fit boots can be stretched over the CV Joint and Quick Boots come in halves.

Product Features:
  • Direct replacement – this CV joint boot kit contains the parts required to repair the CV joint on specified vehicles without removing the joint itself.
  • Ideal solution – this kit is a reliable replacement for original components that have failed due to wear
  • Durable construction – this kit is made from quality components to ensure reliable performance and a long service life
  • Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience
See More

GKN Drivetech – CV Boot Kit (Part No.K601078258LOB)

CV Boot Kit

from

$76.26
With Clamps and Grease SPIDAN and LOBRO boots are specifically developed for the various joints – their accurate fit ensures optimum sealing of the joint. Up-to-date computerized equipment is used for the production of the boot. SPIDAN and LOBRO boot kits contain all the individual parts needed for professional repairs: boot, boot circlips, tightening straps, bolts, nuts, spacers, etc.

Product Features:
  • For every specific application a boot kit to the OES standard
  • Reliable protection against damp and dirt
  • Optimum sealing and abrasion resistance
  • Manufactured according to DIN EN ISO 9001:2000
See More

In-Demand Transfer Cases for 1989 BMW 735is

Select from 2 premium Transfer Cases parts for your 1989 BMW 735i, with prices ranging from $11.86 to $21.75.

SKF – Input Shaft Seal (Part No.J1156198776SKF)

Input Shaft Seal

from

$21.75
Input Shaft Seal

Corteco – Input Shaft Seal (Part No.J1156750991CFW)

Input Shaft Seal

from

$11.86
Input Shaft Seal

Top-Rated Drivetrains Brands For Your 1989 BMW 735i

Shop for the best-rated brands offering Drivetrains and other products for your 1989 BMW 735is. Below you’ll find some of our best rated Drivetrains from Dorman and National, and more. Drivetrains from these brands that fit a 1989 735i start at just $11.49 and are rated as high as 4 stars. OEM and aftermarket Drivetrains don’t get more top quality, durable, and affordable than from the brands below.

Popular Dorman 1989 BMW 735i Drivetrains

When it comes to maintaining or upgrading your 1989 BMW 735i, using quality Drivetrains is essential to ensure durability and a perfect fit. Dorman ticks all of those boxes. We offer a wide selection of Dorman Drivetrains, specifically designed for the 1989 BMW 735i. With over 5 Dorman brand Drivetrains in stock, you’re sure to find what you need. The prices for these top-notch parts start as low as $23.99, with an average price of just $230.80. Plus, with over 44 customer reviews and an average rating of 4 stars, you can trust that our Dorman Drivetrains will get the job done right. Choose Advance Auto Parts for reliability, quality, and expert-approved parts that keep your vehicle running strong.

OE Solutions Driveshaft Flex Joint Coupler
from
$92.53
This product is not rated

OE Solutions Driveshaft Flex Joint Coupler

“”

Rear Drive Shaft: Adjustable
from
$951.99
This product is not rated

Rear Drive Shaft: Adjustable

“”

Uni-Fit C.V. Joint Boot Kit Outer up to 3.58 In. Diameter
from
$29.49

(36)

Uni-Fit C.V. Joint Boot Kit Outer up to 3.58 In. Diameter

“A little hard to get on, but I googled it and found a solution.”

Popular National 1989 BMW 735i Drivetrains

National auto parts is one of the highest quality Drivetrain brands in the market. Any 1989 BMW 735i owner should feel confident when installing genuine National parts in their vehicle. To ensure the best fit and performance for your 1989 735i, Advance Auto Parts carries a full inventory of 9 National Drivetrains. Plus you will be keeping your BMW in peak condition while saving money because prices on these National Drivetrains range from $11.49 to $41.49, plus, with more than 4 customer reviews and an impressive 4 stars average rating, you can be confident the Fram Drivetrains below will deliver on both quality and value.

Bearings
from
$14.29
This product is not rated

Bearings

“”

Bearings
from
$11.49
This product is not rated

Bearings

“”

Bearings
from
$22.99
This product is not rated

Bearings

“”

FAQs for 1989 BMW 735i Drivetrains

Which Drivetrains are best-sellers for 1989 BMW 735is?

Out of 39 Drivetrains that fit 1989 BMW 735is, the following parts are the top sellers:

What’s the price range for 1989 BMW 735i Drivetrains?

Drivetrain prices for the 1989 BMW 735i start at $4.99 and go up to $951.99 for the most premium parts.

What’s the average price of a Drivetrain for a 1989 BMW 735i?

The average price for Drivetrains for the 1989 BMW 735i is $59.25. Keep in mind the variety of part types within our Drivetrain category so you are likely to find a wide range of prices across a variety of parts and components.

Does Advance Auto Parts sell Drivetrains for other BMW 735i model years?

Yes, we currently carry Drivetrains for 7 model years of BMW 735is between 1985 and 1992. Drivetrains are bought most frequently for the following model years: 1992, 1991, 1990, 1988, 1987, 1986, and 1985.

What are the cheapest Drivetrains for my 1989 BMW 735i?

The cheapest 1989 BMW 735i Drivetrains we carry in stock are:

What are the top-rated Drivetrains that fit the 1989 BMW 735i?

Out of 48 reviews by customers, our 1989 BMW 735i Drivetrains have an average customer rating of . These are some of the highest-rated Drivetrain types for the 1989 BMW 735i and their top-rated products:

What types of Drivetrains do you sell for my 1989 BMW 735i?

Can I get help with 1989 BMW 735i Drivetrain orders?

Contact our customer support team, by chat or phone, through the help desk page, where you can find instant answers about BMW Drivetrains and more.

What is your return policy for BMW 735i Drivetrains?

Advance Auto Parts keeps returns simple. For new BMW 735i Drivetrains and accessories, your online orders can be returned, in their original condition, within 45 days. For requirements, see the returns page.