1988 Jeep Cherokee Drive Shafts and Axles

Essential 1988 Jeep Cherokee Drive Shafts and Axles

Yukon Gear – Replacement Outer Stub Axle Shaft For ’95 And Newer Dana 30, Wrangler (Part No.21087)

Replacement Outer Stub Axle Shaft For '95 And Newer Dana 30, Wrangler

from

$119.99
Yukon replacement outer stub axle shaft for ’95 and newer Dana 30, Wrangler with a length of 6.11 inches and with 27 splines. Yukon front axles come with a one year warranty against manufacturing defects.

Product Features:
  • Fits Jeep Wrangler and Cherokee front with Dana Spicer 30
  • Outer stub
  • 27 spline
  • 6.11″ from end of splines to center of u-joint bore
See More

Crown Auto Jeep Replacmnt – Red (Part No.83503504)

Red

from

$7.99
Crown Automotive continues to be the leader in quality replacement parts for Jeep(R) vehicles. Crown has the largest stock of replacement parts for Jeep(R) vehicles, including factory discontinued parts. In fact, many of the older Jeeps are still on (and off) the road thanks to Crown parts. The Crown line consists of axle, body, brake, clutch, cooling, driveline, electrical, engine, exhaust, fuel, steering, suspension, transmission And transfer case components. Crown Automotive also offers an exclusive line of component kits And accessory products.

Product Features:
  • Manufactured From High Quality Material
  • Engineered To The Specifications
  • Meets The Quality Standards
  • Designed For Performance And Durability
  • Easy To Install
See More

Yukon Gear – Replacement Yoke For Dana 30, 44, And 50 With 26 Spline And A 1330 U/Joint Size (Part No.41019)

Replacement Yoke For Dana 30, 44, And 50 With 26 Spline And A 1330 U/Joint Size

from

$146.99
Yukon replacement yoke for Dana 30, 44, and 50 with 26 spline and a 1330 U/joint size. 3.625″ snap ring span, 1.062″ cap diameter. Outside snap ring. This yoke uses straps. All Yukon yokes come with a one year warranty against manufacturing defects.

Product Features:
  • Fits Dana Spicer 30 and 44
  • 26 spline
  • 1330 u-joint size
  • Outside snap ring design
  • 3.625″ snap ring span
  • 1.062″ cap diameter
  • Strap style
See More

Spicer – SPICER U-JOINT (Part No.5-1310-1X)

SPICER U-JOINT

from

$44.99
SPICER U-JOINT

National – Multi Purpose Seal (Part No.710068)

Multi Purpose Seal

from

$17.49
National has built a reputation as one of the most respected names in the industry. We have offered premium sealing solutions for more than 75 years. Our design team keeps pace with the industry and provides advanced solutions for today’s vehicles.

Product Features:
  • Low swell in hydrocarbon fluids
  • Design type: spring loaded; multi-lip
  • Provides good low temperature capability
  • Temperature range: -40°F to 225°F; -40°C to 107°C
  • Delivers quality and reliable performance for every type of repair
See More

Carquest Premium – C/V AXLE (Part No.NCV752921)

C/V AXLE

from

$162.99
C/V AXLE

Yukon Gear – Axle Bearing Retainer Plate For Dana 44 TJ Rear (Part No.33472)

Axle Bearing Retainer Plate For Dana 44 TJ Rear

from

$19.99
Product Features:
  • Axle bearing retainer for Jeep TJ rear with Dana Spicer 44
  • 3/8″ bolt holes
  • 1 5/8öx3 3/16ö bolt pattern
See More

National – Bearings (Part No.HM88649)

Bearings

from

$21.79
National Oil Seals & Bearings offer a full line of premium oil seals and bearings.

Product Features:
  • Premium bearing design matches OEM specifications
  • Precision manufactured using premium-grade steel for outstanding durability and performance
  • Crowned raceways and rollers to ensure even load distribution for maximum life
  • Industry leading coverage
  • Professional technicians know they can depend on National
See More

Yukon Gear – Replacement Redi-Sleeve Yoke Saver For Dana 25, Dana 27, Dana 30, Dana 44, Dana 50 (Part No.30222)

Replacement Redi-Sleeve Yoke Saver For Dana 25, Dana 27, Dana 30, Dana 44, Dana 50

from

$182.99
Replacement redi-sleeve yoke saver for Dana 25, Dana 27, Dana 30, Dana 44, Dana 50 .Yukon Mighty seal.

Product Features:
  • Pinion Redi-sleeve
  • Fits Dana Spicer 25, 27, 30, 4 and 50
See More

Yukon Gear – Model 35 & Other Screw-Inaxle Stud, 1/2" -20 X 1.5" (Part No.33180)

Model 35 & Other Screw-Inaxle Stud, 1/2" -20 X 1.5"

from

$5.99
Model 35 & other screw-inaxle stud, 1/2″ -20 x 1.5″.

Product Features:
  • Screw in axle stud for AMC Model 35
  • 1/2″ x 20 thread
  • 1.5″ long
See More

Yukon Gear – Replacement Axle Stud For Dana 44 & Model 35 (Part No.33171)

Replacement Axle Stud For Dana 44 & Model 35

from

$5.99
Product Features:
  • Rear axle stud for Dana Spicer 44 and AMC Model 35
  • 1/2″ x 20 thread
  • 0.618″ knurl diameter
  • 1 15/32″ long
  • 31/64″ shoulder length
See More

Dorman – Drive Shaft Repair Kit – Only Fits Dorman Driveshafts (Part No.932-988)

Drive Shaft Repair Kit - Only Fits Dorman Driveshafts

from

$51.99
This drive shaft repair kit is designed to match the original hardware required to repair the drive shaft on specified vehicles. Made of quality components, this kit is engineered for reliable performance and durability.

Product Features:
  • Direct replacement – this drive shaft repair kit is designed to match the original hardware required to repair the drive shaft on specified vehicle.
  • Ideal solution – this kit is a reliable replacement for original components that have failed due to fatigue.
  • Durable construction – this kit is made from quality components to ensure reliable performance and a long service life
  • Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience
See More

Yukon Gear – Dana 20 / 44 Axle Bearing And Seal Kit Replacement (Part No.10042)

Dana 20 / 44 Axle Bearing And Seal Kit Replacement

from

$123.99
Yukon replacement axle bearing & seal kits are specially designed for each application & use all high quality bearings & seals. Axle bearing and seal kit (Set10), some flanged, Timken brand, for Dana 44 and Model 20. This axle bearing & seal kit services one side only.

Product Features:
  • Axle bearing and seal kit for Dana 44 rear and Nissan Titan rear
  • Includes axle bearing and seal
  • Services one side
See More

Crown Auto Jeep Replacmnt – For Use With Model 30 Front Axle/ Model 44 Front Axle/ Model 35 Rear Axle (Part No.J8126500)

For Use With Model 30 Front Axle/ Model 44 Front Axle/ Model 35 Rear Axle

from

$61.99
Crown Automotive continues to be the leader in quality replacement parts for Jeep(R) vehicles. Crown has the largest stock of replacement parts for Jeep(R) vehicles, including factory discontinued parts. In fact, many of the older Jeeps are still on (and off) the road thanks to Crown parts. The Crown line consists of axle, body, brake, clutch, cooling, driveline, electrical, engine, exhaust, fuel, steering, suspension, transmission And transfer case components. Crown Automotive also offers an exclusive line of component kits And accessory products.

Product Features:
  • Leading Manufacturer Of Quality Replacement Parts For Jeep
  • Meets Standards For Quality
  • Crown Automotive Has Consistently Maintained Its Commitment To Offering Only Quality Parts And Exceptional Service
  • Improve The Performance
  • Easy Installation
See More

Yukon Gear – Inner Axle Dust Shield For Dana 30 (Part No.33442)

Inner Axle Dust Shield For Dana 30

from

$8.99
Product Features:
  • Inner axle dust shield
  • Fits Dana Spicer 30
See More

Yukon Gear – Replacement Outer Stub Dust Shield For Dana 30, Dana 44 & Model 35 (Part No.33015)

Replacement Outer Stub Dust Shield For Dana 30, Dana 44 & Model 35

from

$6.99
Product Features:
  • Outer stub dust shield for Dana Spicer 30, 44 and AMC Model 35 IFS
See More

National – Bearings (Part No.SCH-1810)

Bearings

from

$18.49
National Oil Seals & Bearings offer a full line of premium oil seals and bearings.

Product Features:
  • Premium bearing design matches OEM specifications
  • Precision manufactured using premium-grade steel for outstanding durability and performance
  • Available in both caged design and full complement
  • Industry leading coverage
  • Professional technicians know they can depend on National
See More

Yukon Gear – The Carrier Bearing Puller (Part No.56072)

The Carrier Bearing Puller

from

$883.99
The Yukon carrier bearing Puller works with an impact gun to quickly and safely remove carrier bearings without damaging them. This unit comes with a handy bench top stand and works with up to one ton applications including Dana 70HD, Dana 80, 10.25″ & 10.5″ Ford, or GM & Chrysler 11.5″ differentials.

Product Features:
  • Carrier bearing puller
  • Works with an impact gun to safely and easliy remove carrrier bearings
See More

Dorman – Front Drive Shaft: Greaseable, Adjustable (Part No.938-233)

Front Drive Shaft: Greaseable, Adjustable

from

$757.99
Replacing a drive shaft doesn’t have to be complicated. This complete drive shaft assembly is pre-balanced and ready to install with 100% new yokes, tubes, constant velocity (CV) joints and universal joints.

Product Features:
  • Direct replacement – this drive shaft is made to the original equipment dimensions for dependable fit and performance.
  • 100% new – this drive shaft is made from all new components so there’s no core charge or return hassle.
  • Ready to install – this drive shaft arrives pre-balanced to make installation quick and simple
  • Serviceable construction – non-staked universal joints are designed for future serviceability
See More

Dorman – Rear Drive Shaft: Adjustable (Part No.976-175)

Rear Drive Shaft: Adjustable

from

$511.99
Replacing a drive shaft doesn’t have to be complicated. This complete drive shaft assembly is pre-balanced and ready to install with 100% new yokes, tubes, constant velocity (CV) joints and universal joints.

Product Features:
  • Direct replacement – this drive shaft is made to the original equipment dimensions for dependable fit and performance
  • 100% new – this drive shaft is made from all new components so there’s no core charge or return hassle
  • Ready to install – this drive shaft arrives pre-balanced to make installation quick and simple
  • Serviceable construction – non-staked universal joints are designed for future serviceability
See More

Dorman – Rear Drive Shaft: Adjustable (Part No.976-137)

Rear Drive Shaft: Adjustable

from

$479.99
Replacing a drive shaft doesn’t have to be complicated. This complete drive shaft assembly is pre-balanced and ready to install with 100% new yokes, tubes, constant velocity (CV) joints and universal joints.

Product Features:
  • Direct replacement – this drive shaft is made to the original equipment dimensions for dependable fit and performance.
  • 100% new – this drive shaft is made from all new components so there’s no core charge or return hassle.
  • Ready to install – this drive shaft arrives pre-balanced to make installation quick and simple
  • Serviceable construction – non-staked universal joints are designed for future serviceability
See More

FAG US – WHEEL BEARING (Part No.KT10)

WHEEL BEARING

from

$70.99
WHEEL BEARING

National – Shaft Repair Sleeve (Part No.99166)

Shaft Repair Sleeve

from

$34.99
National® has built a reputation as one of the most respected names in the industry. We have offered premium sealing solutions for more than 75 years. Our design team keeps pace with the industry and provides advanced solutions for today’s vehicles.

Product Features:
  • Designed to repair damaged, grooved or worn shafts
  • Durable stainless steel construction for corrosion-free sealing surface that surpasses most original shaft specifications
  • Ideal for a shaft where indications of seal wear, such as tracks or grooves have developed
  • Ultra-thin construction (0.01/0.25mm wall thickness) allows original seal size to be used with minimal additional lip loading
  • Easy to install with removable flange and installation tool
  • Installation tool reduces sleeve distortion and allows for installation without removal from the shaft
See More

National – Shaft Repair Sleeve (Part No.99128)

Shaft Repair Sleeve

from

$41.99
National® has built a reputation as one of the most respected names in the industry. We have offered premium sealing solutions for more than 75 years. Our design team keeps pace with the industry and provides advanced solutions for today’s vehicles.

Product Features:
  • Designed to repair damaged, grooved or worn shafts
  • Durable stainless steel construction for corrosion-free sealing surface that surpasses most original shaft specifications
  • Ideal for a shaft where indications of seal wear, such as tracks or grooves have developed
  • Ultra-thin construction (0.01/0.25mm wall thickness) allows original seal size to be used with minimal additional lip loading
  • Easy to install with removable flange and installation tool
  • Installation tool reduces sleeve distortion and allows for installation without removal from the shaft
See More

Yukon Gear – C/Clip (Part No.33083)

C/Clip

from

$8.99
C/Clip for Chrysler 8.25″, Ford 7.5″, 8.8″, GM 12 bolt car & truck, 8.2″, 8.5″ & 8.6″.

Product Features:
  • c-clip for Chrysler 8.25″, Ford 8.8″, GM 12 bolt car and truck and GM 8.2″, 8.5″ and 8.6″
  • .150″ thick
See More

Yukon Gear – Model 35 C/Clip (Part No.33076)

Model 35 C/Clip

from

$10.99
Model 35 C/clip.

Product Features:
  • c-clip for AMC Model 35
See More

1988 Jeep Cherokee Drive Shafts and Axles

Maybe you’re in the middle of a full rebuild of that 1988 Jeep Cherokee. Maybe you just need a couple of Drive Shafts and Axles. Either way, Advance Auto Parts has 78 different Drive Shafts and Axles in our inventory ranging from $1.99 to $947.99. That means you can find the exact parts or products you need to keep that 1988 Jeep Cherokee running smoothly.

Drive Shafts and Axles are only as good as their brand. We stock 14 different brands to make sure you have plenty of trusted parts to choose from for your 1988 Jeep Cherokee. Spicer, National, and Carquest Premium are just some of the brands we stock. Search for brands you know or compare prices and reviews to help you decide!

We know you’ll find the perfect Drive Shafts and Axles for your 1988 Jeep Cherokee, but don’t take our word for it – read our customer ratings and reviews and buy with confidence. Out of the 513 reviews in this category, some of the top rated parts include Multi Purpose Seal with 4.5 stars and Wheel Lug Stud with 3.0 stars.

So if you’re in the market for aftermarket Drive Shafts and Axles to keep your 1988 Jeep Cherokee rolling for years to come, look no further. Shop online and have your products shipped direct to your door, or pick up at the nearest Advance Auto Parts location today!

Drive Shafts and Axles Brands To Make Your 1988 Jeep Cherokee Last

Simple repair, complete replacement, or a full rebuild. No matter the job, your 1988 Jeep Cherokee demands trusted brand parts and products to keep it running. Many trusted brands of Drive Shafts and Axles make up Advance Auto Parts’ inventory, and all are ready to help make your Cherokee the best it can be. Be sure to browse some of our top Drive Shafts and Axles brands and parts.

Popular Spicer Drive Shafts and Axles

We carry Spicer parts in our stock across Axle Shaft Universal Joints categories, plus more. For a 1988 Jeep Cherokee, our most popular Spicer Drive Shafts and Axles include:
Universal Joint
from $51.99
(7)
Universal Joint
Axle Shaft Universal Joints
Universal Joint
from $35.99
(2)
Universal Joint
Axle Shaft Universal Joints

Top 1988 Jeep Cherokee Drive Shafts and Axles from Carquest Premium

Carquest Premium products are another trusted brand when it comes to Drive Shafts and Axles for your 1988 Jeep Cherokee. Popular Carquest Premium parts include:
CV Axle Shaft Assembly
from $94.99
(14)
CV Axle Shaft Assembly
Drive Shaft and Axles
CV Axle Shaft Assembly
from $106.99
(12)
CV Axle Shaft Assembly
Drive Shaft and Axles

FAQs for 1988 Jeep Cherokee Drive Shafts and Axles

What are the most purchased Drive Shafts and Axles for the 1988 Jeep Cherokee?

Out of 78 Drive Shafts and Axles for the 1988 Jeep Cherokee, the most popular in our inventory are:
Multi Purpose Seal
from $17.49
(4)
Multi Purpose Seal
Axle Shaft Seals
Multi Purpose Seal
from $18.99
(14)
Multi Purpose Seal
Axle Shaft Seals
Bearings
from $21.79
(1)
Bearings
Drive Shaft Bearings

What are the top-rated 1988 Jeep Cherokee Drive Shafts and Axles?

Top-rated Drive Shafts and Axles for your 1988 Jeep Cherokee based on customer reviews/ratings are:
Multi Purpose Seal
from $19.99
(2)
Multi Purpose Seal
“So far so good with the install in the Jeep wrangler. Not the easiest to install, i would recommend reading some Jeep reviews about how to seat this.”
Wheel Lug Stud
from $7.99
(1)
Wheel Lug Stud
“These are SCREW in design (even though the image shows press) not entirely sure how they “fit” my 2016 JKU Rubicon since my factory and Yukon after ma”