1988 Dodge B250 Performance Engines
More 1988 Dodge B250 Performance Engines
Find your specific 1988 Dodge B250 original or aftermarket Performance Engines below. Order your parts online and have delivered to your home or pick up in-store at Advance Auto.
Essential 1988 Dodge B250 Performance Engines
FEL-PRO Performance – Performance Valve Cover Gasket Set (Part No.1607)
from
$18.99
Fel-Pro® Performance Gaskets deliver reliable sealing under grueling racing conditions.
Product Features:
See More
Product Features:
- Blue Stripe® performance cork-rubber gaskets use cork particles evenly distributed throughout a rubber binder resulting in a compressible gasket without leak paths.
- Not intended for use in emission controlled vehicles.
FEL-PRO Performance – PERFORMANCE VALVE COVER GASKET SET (Part No.1608)
from
$37.49
Fel-Pro Performance Gaskets deliver reliable sealing under grueling racing conditions
Product Features:
See More
Product Features:
- DESIGNED FOR IMPERFECT SEALING SURFACES — Engineered and manufactured specifically for the repair environment to help seal imperfect sealing surfaces
- ENGINEERED TO PERFORM — Proprietary cork-rubber formulation
- SUPERIOR SEAL — Highly conformable to accommodate for the imperfect sealing surfaces
- EVERY PART FOR THE REPAIR — Fel-Pro gasket sets include every part needed for the repair unless otherwise noted
- REAL-WORLD TESTED — Parts are tested on-vehicle and validated to ensure optimal performance on the road
Mr. Gasket – Valve Cover Gasket Set (Part No.379)
from
$30.99
Thick, molded rubber with steel carrier. Manufactured from high-density cork and rubber blend gasket material. A black latex rubber coating is applied to outside of gasket to help seal minor flange irregularities and eliminate the possibility of oil leakage. Creates a positive seal by controlled swelling of the gasket material when exposed to hot engine oil. Available in standard or extra thick to provide additional valve train to cover clearance. For OE replacement, high performance street, drag race and oval track.
Product Features:
See More
Product Features:
- Made from cork/rubber compound
- Can be reused many times
- Thick; fuel-resistant
FEL-PRO Performance – Engine Valve Cover Gasket Set (Part No.1609)
from
$27.49
Fel-Pro Performance Gaskets deliver reliable sealing under grueling racing conditions
Product Features:
See More
Product Features:
- DESIGNED FOR IMPERFECT SEALING SURFACES — Engineered and manufactured specifically for the repair environment to help seal imperfect sealing surfaces
- ENGINEERED TO PERFORM — Proprietary cork-rubber formulation
- SUPERIOR SEAL — Highly conformable to accommodate for the imperfect sealing surfaces
- EVERY PART FOR THE REPAIR — Fel-Pro gasket sets include every part needed for the repair unless otherwise noted
- REAL-WORLD TESTED — Parts are tested on-vehicle and validated to ensure optimal performance on the road
Mr. Gasket – MLS Head Gasket (Part No.3210G)
from
$112.99
Manufactured from nitrile coated spring steel layers. Stress formed embossment provides excellent sealing. Also provides stability and reduces cylinder bore distortion. Ideal for super charged, turbo charged, nitrous oxide and extreme compression ratios. For high performance street, drag race and oval track. Packaged individually.
Product Features:
See More
Product Features:
- Maximum sealing
- Reduced bore distortion
- Uniform bolt load distribution
- Excellent radial strength
FEL-PRO Performance – Cylinder Head Gasket: Steel Core Composite, Without Head Bolts (Part No.1008)
from
$41.49
Fel-Pro Performance Gaskets deliver reliable sealing under grueling racing conditions
Product Features:
See More
Product Features:
- Fel-Pro Performance head gaskets accommodate the high cylinder pressures and cylinder head movement associated with performance engines.
- Inserted within a stainless steel armor surrounding each cylinder, wire ring design provides highly concentrated sealing around the combustion chamber.
- Raises combustion sealing force to roughly three times that of standard head gaskets.
- Steel wire rings for the greatest combustion seal strength.
- Not intended for use in emission controlled vehicles.
Edelbrock – Performer-Plus camshaft for Small-Block Chrysler 318-340-360 V-8 (Part No.2177)
from
$357.99Product Features:
- Designed for Optimum Torque and Acceleration
- Maximum Performance From Idle through Mid-Range
- Matched to Edelbrock Performer Intakes
- Includes Hydraulic Lifters and Assembly Lube
- Major Improvement in Throttle Response and Torque
- Use For Daily Drivers/Trucks/Vans/RVs/4x4s
- Take The Guesswork Out Of Camshaft Selection
Edelbrock – Victor Intake Manifold Small-Block Chrysler (Part No.2915)
from
$473.99
For 3500 to 8000 RPM high-performance engines. For standard rectangular port heads. For oval track and drag race engines. Superior horse power and torque potential.
Product Features:
See More
Product Features:
- For 3500 to 8000 RPM High-Performance Engines
- For Standard Rectangular Port Heads
- For Oval Track/Drag Race Engines
- Superior Horse Power And Torque Potential
Edelbrock – RPM Air-Gap Small Block Chrysler Black Intake Manifold (Part No.75763)
from
$612.99
Edelbrock part #75763 RPM Air-Gap intake manifold is designed for 340-360 c.i.d. Chrysler V8’s and 318 c.i.d. engines with 340-360 cylinder heads. The RPM Air-Gap incorporates the same race-winning technology that’s been used on our Victor Series competit
Product Features:
See More
Product Features:
- 1500-6500 RPM Range
- Dual Plane Type-4150 Style Flange
- 4.9 in. Front Height, 5.35 in. Center Height, 5.8 in. Rear Height
- Black Powder Coated Finish
- Made In The USA
Edelbrock – Performer 318/360 Intake Manifold for S/B Chrysler, LA Series, Black Finish (Part No.21763)
from
$521.99
Edelbrock part #21763 Performer intake manifold is designed for street 318-340-360 c.i.d. Chrysler V8’s. This manifold is not for use on marine engines used in salt water. Will not fit 1992 and later Magnum engines. This manifold offers a durable black po
Product Features:
See More
Product Features:
- Idle-5500 RPM Range
- Dual Plane Type-4150 Style Flange
- 4.13 in. Front Height, 4.63 in. Center Height, 5.13 in. Rear Height
- Black Powder Coated Finish
- Non-EGR
Edelbrock – Performer 318/360 Intake Manifold for Small-Block Chrysler, LA Series Engines (Part No.2176)
from
$397.99Product Features:
- For Idle to 5500 RPM Street-Driven Performance
- Dual-Plane Low-Rise Intake w/180 Deg Firing Order
- Patented Runner Design Ensures Broad Torque Curve
- Excellent Throttle Response and Mid-Range Power
- 50-State Street Legal if Correct Carburetor Used
Mr. Gasket – Super Intake Manifold Bolts (Part No.6080)
from
$26.99
These grade 5 hex head bolts are black coated plated for protection and appearance. Hardened flat washers provide uniform torque and prevent galling on aluminum manifolds.
Product Features:
See More
Product Features:
- Assures Accurate Torque App
- Prevents Galling Manifold
- Grade 5 Material
- Black Oxide Coasted
Mr. Gasket – Chrome Dress-Up Kit (Part No.9831)
from
$125.99
Kits include most popular chrome dress-up components, including short, OEM height valve covers with integral oil baffles.
Product Features:
See More
Product Features:
- Includes oil baffles
- Chrome plated
Mr. Gasket – Cam Change Gaskets (Part No.4424)
from
$55.99
When you change a cam, you don’t need a complete engine gasket set, because you don’t have to take everything apart. Mr. Gasket cam change gasket sets are tailored to deliver just the pieces that you need when you swap bump-sticks. They include gaskets for the valve covers, intake manifold, oil pan, water pump, timing-chain cover, and fuel pump.
Product Features:
See More
Product Features:
- Comes with all gaskets
- Fuel injector oring not included
- Meets performance standards
Mr. Gasket – Oil Pan Gasket (Part No.394)
from
$28.99
Manufactured from high-density cork and rubber blend gasket material. Provides excellent sealing and durability. Complete with molded rubber front/rear oil pan seals where applicable. For OE replacement and high performance street.
Product Features:
See More
Product Features:
- One-piece design
- Eliminates potential leaks
- Prevents over tightening
- Prevents torque loss
FEL-PRO Performance – Oil Pan Gasket Set: High-Temperature Rubber-Coated Fiber, 4 Piece Set (Part No.1807)
from
$30.49
Fel-Pro Performance Gaskets deliver reliable sealing under grueling racing conditions
Product Features:
See More
Product Features:
- Felcoid/Plus gaskets have a fiber sheet core and a latex rubber coating to eliminate potential leakage paths. The core material resists crushing and splitting, while providing excellent blowout resistance.
- With steel core to provide ultimate excellent blowout resistance.
- Not intended for use in emission controlled vehicles.
FEL-PRO Performance – PERFORMANCE OIL PAN GASKET SET (Part No.1806)
from
$21.49
Fel-Pro Performance Gaskets deliver reliable sealing under grueling racing conditions
Product Features:
See More
Product Features:
- Felcoid/Plus gaskets have a fiber sheet core and a latex rubber coating to eliminate potential leakage paths. The core material resists crushing and splitting, while providing excellent blowout resistance.
- With steel core to provide ultimate excellent blowout resistance.
- Not intended for use in emission controlled vehicles.
Popular 1988 Dodge B250 Performance Engines Categories
1988 Dodge B250 Performance Engines
Maybe you’re in the middle of a full rebuild of that 1988 Dodge B250. Maybe you just need a couple of Performance Engines. Either way, Advance Auto Parts has 22 different Performance Engines in our inventory ranging from $18.99 to $703.99. That means you can find the exact parts or products you need to keep that 1988 Dodge B250 running smoothly.
Performance Engines are only as good as their brand. We stock 4 different brands to make sure you have plenty of trusted parts to choose from for your 1988 Dodge B250. FEL-PRO Performance, Mr. Gasket, and Edelbrock are just some of the brands we stock. Search for brands you know or compare prices and reviews to help you decide!
We know you’ll find the perfect Performance Engines for your 1988 Dodge B250, but don’t take our word for it – read our customer ratings and reviews and buy with confidence. Out of the 42 reviews in this category, some of the top rated parts include Performance Valve Cover Gasket Set with 2.5 stars.
So if you’re in the market for aftermarket Performance Engines to keep your 1988 Dodge B250 rolling for years to come, look no further. Shop online and have your products shipped direct to your door, or pick up at the nearest Advance Auto Parts location today!
Performance Engines Brands To Make Your 1988 Dodge B250 Last
Simple repair, complete replacement, or a full rebuild. No matter the job, your 1988 Dodge B250 demands trusted brand parts and products to keep it running. Many trusted brands of Performance Engines make up Advance Auto Parts’ inventory, and all are ready to help make your B250 the best it can be. Be sure to browse some of our top Performance Engines brands and parts.
Popular Mr. Gasket Performance Engines
We carry Mr. Gasket parts in our stock across Performance Engine Cylinder Head Gaskets and Performance Engine Valve Cover Gasket Sets categories, plus more. For a 1988 Dodge B250, our most popular Mr. Gasket Performance Engines include:
Top 1988 Dodge B250 Performance Engines from Mr. Gasket
Mr. Gasket products are another trusted brand when it comes to Performance Engines for your 1988 Dodge B250. Popular Mr. Gasket parts include:
FAQs for 1988 Dodge B250 Performance Engines
What are the most purchased Performance Engines for the 1988 Dodge B250?
Out of 22 Performance Engines for the 1988 Dodge B250, the most popular in our inventory are:
from
$21.49
This product is not rated
PERFORMANCE OIL PAN GASKET SET
Performance Engine Oil Pan Gaskets
from
$397.99
This product is not rated
Performer 318/360 Intake Manifold for Small-Block Chrysler, LA Series Engines
Performance Intake Manifolds
from
$37.49
This product is not rated
PERFORMANCE VALVE COVER GASKET SET
Performance Engine Valve Cover Gasket Sets
What are the top-rated 1988 Dodge B250 Performance Engines?
Top-rated Performance Engines for your 1988 Dodge B250 based on customer reviews/ratings are:
from
$18.99
(2)
Performance Valve Cover Gasket Set
“fits 1964-1991 with 5 bolts, rubber gasket lasts”
