1987 Oldsmobile Custom Cruiser Performance and Racing Products
More 1987 Oldsmobile Custom Cruiser Performance and Racing Products Categories
If you’re looking for an original Performance and Racing Products replacement for a 1987 Oldsmobile Custom Cruiser, you can search through our selection below. You’ll also find aftermarket and OEM Performance and Racing Products to meet your needs.
Essential 1987 Oldsmobile Custom Cruiser Performance and Racing Products
Airaid – Air Filter (Part No.800-315)
from
$60.99
304 stainless steel mesh. 5 layer construction. Most durable filters in the industry. Outperforms the others in clean air testing. Assures cleanest air possible from washable filter. Provides balance between air flow and peak filtration. Lifetime no hassle warranty.
Product Features:
See More
Product Features:
- Multi-Layer Construction
- Most Durable Filters In The Industry
- Outperforms The Others In Clean Air Testing
- Assures Cleanest Air Possible From Washable Filter
- Washable And Reusable
- Made In The USA
- Lifetime No Hassle Warranty
PerTronix – D4061 Flame-Thrower HEI Distributor Rotor Red (Part No.D4061)
from
$15.99
Made from hi-performance 60 KV rated alkyd molding compound for superior protection from “arc-thru” and cross-fire. Our cap and rotor kits include nylon rotor hold-down screws. Flame-Thrower dust covers provide a larger air gap around the coil which provi
Product Features:
See More
Product Features:
- PerTronix D4061 Flame-Thrower HEI Distributor Rotor Red
- Made from hi-performance 60 KV rated alkyd molding compound.
Accel – Super Coil Ignition Coil (Part No.140001)
from
$98.99
These coils feature advanced bobbin technology, highly specialized silicone magnetic steel cores, along with optimized winding, resistance and turns ratios to delivery 10-15 percent more energy than the OEM coils. Specialized high temperature epoxy resist
Product Features:
See More
Product Features:
- Oil Filled For Better Cooling
- Optimized Low Resistance
- Silicon Magnetic Steel E-Core
- Higher Energy/Voltage Outputs
- Quicker Starts
- Improved Idle Quality
- Resists Shock And Vibration
- Resists Corrosion
Edelbrock – TIMING CHAIN (Part No.7844)
Energy Suspension – Control Arm Bushing Set (Part No.3.3113R)
from
$107.99
For both front and rear of suspensions on cars, trucks and SUVs. Maintains proper alignment under extreme conditions on and off-road and during competition. Improves vehicle handling, cornering and overall control. Full floating for smoother operation. Made of Energy’s Hyper-Flex performance polyurethane to add performance and durability.
Product Features:
See More
Product Features:
- Maintains Better Alignment While Driving
- Full Floating and Non Binding
- Fits Into the Remaining Stock Control Arms
Energy Suspension – Control Arm Bushing Set (Part No.3.3167R)
from
$55.99
For both front and rear of suspensions on cars, trucks and SUVs. Maintains proper alignment under extreme conditions on and off-road and during competition. Improves vehicle handling, cornering and overall control. Full floating for smoother operation. Made of Energy’s Hyper-Flex performance polyurethane to add performance and durability.
Product Features:
See More
Product Features:
- Maintains Better Alignment While Driving
- Full Floating and Non Binding
- Fits Into the Remaining Stock Control Arms
Edelbrock – Performer Carburetor #9906 600 CFM With Electric Choke, Satin Finish (Non-EGR) (Part No.9906)
from
$397.99
Burnished aluminum. GM/MAC- style throttle linkage. Electric choke installed from factory. Easy tuning with 2 piece design. Smooth secondary transition. Both timed for full vacuum ports. Includes PCV outlet.
See More
MSD Ignition – Distributor Cap; GM HEI; Late Model; External Coil (Part No.8426)
from
$35.99
All MSD extra duty distributor caps are designed with performance in mind and are molded from high quality, voltage insulating material and use low resistance terminals.
Product Features:
See More
Product Features:
- Designed w/Performance In Mind
- High Quality; Voltage Insulating Material
Mr. Gasket – Chrome Plated Engine Oil Pan (Part No.9781)
from
$89.99
Beautifully chrome plated. Complete with drain plug, washer & bolts (stock depth). Chrome-plated dipsticks with tubes sold separately.
Product Features:
See More
Product Features:
- Chrome plated
- Includes drain plug/washer/bolts
Earls Performance Product – Brake Bleeder Screws (Part No.280029ERL)
from
$36.99
Brake Bleeder Screws
Richmond Gear – RngPnn (Part No.49-0007-1)
from
$360.99
RngPnn
Accel – Spark Plug Wire (Part No.8847)
from
$119.99
Spark Plug Wire
B & M – Automatic Shifter, Light Truck Megashifter (Part No.80680)
from
$467.99
The B&M Megashifter has it all, form, function and classic style. This all adds up to bring you a quality shifter that’s been one of the most popular automatic shifters of all time. The light truck Megashifter is better suited for truck and bench seat applications with its overall height of 14.85-inches tall (2.25-inches taller than #80690 Megashifter.) The positive ratcheting action won’t allow you to over-shift and miss a gear at that critical moment, along with the reverse lockout feature meets NHRA/IHRA safety rules for those weekend grudge races at the track, while the look and feel of the T-handle and accordion style shift boot really shows off its racing heritage. Other features include a black console that you can trim to match the contour of your vehicle’s floor, 5-foot long shifter cable, cable brackets, transmission shift levers, chrome plated top plate with lighted gear indicator and everything needed for an easy at home installation. An optional T-handle with a 12-volt button is available separately for actuating a trans-brake, nitrous oxide or other accessories for the hard-core performance enthusiast. This shifter fits most popular Chrysler, Ford and GM 3 and 4-speed automatic transmissions. Note: AOD transmissions require optional kit #40496, GM 4L60E through 4L85E transmissions with PRNDL switch will require optional kit #70499. Overall Dimensions – 14.9L x 6.4W x 14.8H
Product Features:
See More
Product Features:
- Universal Floor Mount Application
- Cable Operated
- Quick Installation
- Accurate Shifting
- NHRA/IHRA Reverse Lockout Meets Requirements
- Use w/Reverse Pattern Valve Body
- Includes Neutral Safety Switch
- Includes Backup Light Switch
Hurst – Automatic Shifter, Quarter Stick Powerglide (Part No.3160001)
from
$409.99
The Hurst Quarter Stick is designed for 2 and 3 speed applications. Its precision gate style mechanism ensures a positive feel. It features, a neutral safety switch, NHRA approved reverse lockout, and a brushed aluminum cover.
Product Features:
See More
Product Features:
- Forward and Reverse Shift Patterns
- Chrome Plated Trigger for Detent Activity
- Factory Neutral Safety Switch
- Compact And Lightweight
- Roller Detent with Shifter Pattern
Mallory – Unilite Breakerless Ignition Conversion Kit (Part No.501)
from
$113.99
Put an end to high maintenance point ignition systems by installing a proven Mallory Unilite ignition conversion kit. Features at a glance, improves performance and fuel efficiency, easy to install with simple hand tools, reduced maintenance and is available for all popular 12-volt negative ground domestic cars and trucks.
Product Features:
See More
Product Features:
- Easy Installation
- Improved Fuel Economy
- Reduced Maintenance
- Accurate Timing
- Improved Performance
- Provides A Simple Conversion
- No Moving Parts To Wear Out
Mallory – Distributor Wiring Harness (Part No.29349)
Accel – Distributor Cap And Rotor Kit (Part No.8123)
Accel – Distributor Cap And Rotor Kit (Part No.8122)
from
$41.99
ACCEL cap and rotor kits offer superior protection from arc-thru and crossfire. Features 60k V-rated alkyd compound, stress-relieved at molding to ensure stability. Brass inserts and steel rotor springs provide for high spark energy flow.
Product Features:
See More
Product Features:
- Features Protection From Arc Thru And Crossfire
- Features 60K V Rated Alkyd Compound
B & M – Torque Converter, Nitrous Holeshot 3600 (Part No.20482)
from
$563.99
Nitrous Holeshot Converters are Built with the same features as the other B&M Holeshots, with the addition of anti-balloon plates. The anti-balloon plates will allow these converters to stand up to the instant horsepower nitrous delivers.
Product Features:
See More
Product Features:
- 3400-3800 RPM
- Small And Big Blocks
- Serious Performance
- Furnace Brazed
- Fully Balanced
B & M – Torque Converter, Nitrous Holeshot 3000 (Part No.20481)
from
$696.99
Nitrous Holeshot Converters are Built with the same features as the other B&M Holeshots, with the addition of anti-balloon plates. The anti-balloon plates will allow these converters to stand up to the instant horsepower nitrous delivers.
Product Features:
See More
Product Features:
- 2800-3200 RPM
- Small And Big Blocks
- Serious Performance
- Furnace Brazed
- Fully Balanced
Energy Suspension – Tie Rod Dust Boot (Part No.9.13102R)
from
$5.99
Repair torn and worn-out boots of suspension tie rod ends – without having to buy the entire and expensive tie rod. Adds durability surpassing most OEM rubber boots. Exclusive 5 point sealing action. Choose from four sizes and round or octagon styles. Made of Energy’s Hyper-Flex performance polyurethane for added performance and durability.
Product Features:
See More
Product Features:
- Easy to Install
- Superior Material
- Saves Your Tie Rods
- Lasts Longer
- Looks Great
Energy Suspension – Tie Rod Dust Boot (Part No.9.13101G)
from
$9.99
Repair torn and worn-out boots of suspension tie rod ends – without having to buy the entire and expensive tie rod. Adds durability surpassing most OEM rubber boots. Exclusive 5 point sealing action. Choose from four sizes and round or octagon styles. Made of Energy’s Hyper-Flex performance polyurethane for added performance and durability.
Product Features:
See More
Product Features:
- Easy to Install
- Superior Material
- Saves Your Tie Rods
- Lasts Longer
- Looks Great
Edelbrock – Performer RPM 2 Carb/Plate Nitrous Systems Square-Bore Carbs (200-300-400+ Hp) (Part No.70056)
from
$1243.99
Designed for carburetor V8 engines. Power increases from 200 to 400 horsepower. Simple to install. Shorter spray bars. More even distribution across the plenum. A more balanced air and fuel ratio. Quicker response time.
Product Features:
See More
Product Features:
- Designed For Carbureted V8 Engines
- Power Increases From 200-400_ HP
- Simple To Install
- Shorter Spray Bars
- More Even Distribution Across The Plenum
- A More Balanced Air/Fuel ratio
- Quicker Response Time
Energy Suspension – Sway Bar End Link Kit (Part No.9.8117R)
from
$25.99
Made of high durometer, very firm, Hyper-Flex performance polyurethane. They’re economical, increase efficiency and are easy to install. Use Energy Suspension sway bar end links with sway bar bushings to get the maximum performance benefit. Combine both for the same effect as buying a larger sway bar. Together they offer a dramatic improvement in performance and handling.
Product Features:
See More
Product Features:
- Made from HYPER-Flex Polyurethane
- Allows Vehicle to Work At Maximum Efficiency
- Easy to Install
- Superior Performance and Greater Longevity
- Lasts Much Longer Than OEM Rubber End Links
Edelbrock – Performer RPM; Nitrous Systems (Part No.70092)
from
$766.99Product Features:
- Designed For Carbureted V8s
- Power Increases From 100-250 HP
- Precision EDM Machined Spray Bars
- Simple To Install
Popular 1987 Oldsmobile Custom Cruiser Performance and Racing Products Categories
1987 Oldsmobile Custom Cruiser Performance and Racing Products
You count on your 1987 Oldsmobile Custom Cruiser to run right. That means taking care of it with regular maintenance, necessary repairs, and the right parts. Advance Auto Parts can help with all of that thanks to our extensive inventory of trusted Performance and Racing Products. With 61 Performance and Racing Products ranging in price from $5.99 to $1,243.99, you’re sure to find everything you need for your 1987 Oldsmobile Custom Cruiser.
Brands matter. If you want to shop a specific Performance and Racing Products brand, we stock 12 different brands like Energy Suspension, Accel, and Edelbrock. 1987 Oldsmobile Custom Cruiser Performance and Racing Products start as low as $5.99!
One of the best ways to find top quality OEM or aftermarket Performance and Racing Products is by asking professionals. Short of that, you can shop with confidence thanks to our 85 extensive product reviews on 1987 Oldsmobile Custom Cruiser Performance and Racing Products. Some of the top-rated Performance and Racing Products products we carry are Differential Ring And Pinion with 4.2 stars and Performer 1405 Carburetor: 600 CFM, 4 Barrel, Square Bore, Manual Choke Inlet with 4.7 stars.
Did we mention you can order your Performance and Racing Products from our online catalog and have them shipped right to your garage? Or, if you feel like seeing the parts first-hand, search for your nearest Advance Auto Parts location above and pick up in-store when you’re ready. Browse our full Performance and Racing Products inventory for your 1987 Oldsmobile Custom Cruiser below to get started!
Top-Rated Performance and Racing Products Brands For Your 1987 Oldsmobile Custom Cruiser
Trusted Performance and Racing Products OEM and aftermarket product brands are what Advance Auto Parts specializes in. The brands we work with are sure to keep that 1987 Oldsmobile Custom Cruiser running right for years to come. In our inventory you’ll find brands like Energy Suspension, Accel, Edelbrock, and even more.
Popular B & M Performance and Racing Products
You’ll find popular B & M brand products across Performance Shifters. All are waiting to get your 1987 Oldsmobile Custom Cruiser back on the road. Some of the top-rated B & M products in these categories are:
Top-Rated Accel Performance and Racing Products
If Accel are what you’re looking for, our inventory holds plenty. We stock Accel brand Performance and Racing Products for your 1987 Oldsmobile Custom Cruiser, and some of our most reviewed Accel parts include:
FAQs for 1987 Oldsmobile Custom Cruiser Performance and Racing Products
What are the most purchased Performance and Racing Products for the 1987 Oldsmobile Custom Cruiser?
Out of 61 Performance and Racing Products for the 1987 Oldsmobile Custom Cruiser, the most popular in our inventory are:
What are the top-rated 1987 Oldsmobile Custom Cruiser Performance and Racing Products?
Top-rated Performance and Racing Products for your 1987 Oldsmobile Custom Cruiser based on customer reviews/ratings are:
from
$394.99
(10)
Performer 1405 Carburetor: 600 CFM, 4 Barrel, Square Bore, Manual Choke Inlet
“i have delt with every auto parts dealer there is and advance allways treats me like im their only custemer, thanks guys and gals!!!”
from
$397.99
(5)
Performer Carburetor #9906 600 CFM With Electric Choke, Satin Finish (Non-EGR)
“easy to install all the gaskets and parts came with it”
