1987 Mercury Cougar Drivetrains
More 1987 Mercury Cougar Drivetrains Categories
If you’re looking for an original Drivetrains replacement for a 1987 Mercury Cougar, you can search through our selection below. You’ll also find aftermarket and OEM Drivetrains to meet your needs.
Essential 1987 Mercury Cougar Drivetrains
Yukon Gear – Trao Loc Spring For Ford 8.8", 28 Spline (Part No.33515)
Pro-King – Differential Internal Nest Kit (Part No.762B717A)
from
$99.99
Pro-King is the leading supplier of transmission and driveline products in the aftermarket.
Product Features:
See More
Product Features:
- All products are designed to meet or exceed OE quality, form, fit and funtion.
National – Bearings (Part No.M88010)
from
$10.49
National Oil Seals & Bearings offer a full line of premium oil seals and bearings.
Product Features:
See More
Product Features:
- Premium bearing design matches OEM specifications
- Precision manufactured using premium-grade steel for outstanding durability and performance
- Crowned raceways and rollers to ensure even load distribution for maximum life
- Industry leading coverage
- Professional technicians know they can depend on National
Yukon Gear – Standard Open & Tracloc Pinion Gear And Thrust Washer For 7.5" Ford (Part No.33296)
from
$10.99
Standard Open & TracLoc pinion gear thrust washer for 7.5″ Ford.
Product Features:
See More
Product Features:
- Pinion gear thrust washer
- Fits Ford 7.5″
Yukon Gear – Bearing Race Driver (Part No.56019)
from
$192.99
Bearing race driver. No return.
Product Features:
See More
Product Features:
- Bearing race driver
- Fits LM104911 race
- All steel construction
Richmond Gear – RngPnn (Part No.79-0078-1)
from
$538.99
RngPnn
Yukon Gear – Chrome Cover For 7.5" Ford (Part No.32008)
Yukon Gear – Pinion Install Kit For Ford 9" Differential, 28 Spline, Oversize (Part No.13052)
from
$409.99
Yukon Pinion installation kits are a terrific solution for gear installation on lower mileage vehicles where the carrier bearings & races can be reused. This kit uses Timken bearings and races along with a high quality pinion seal and small parts. Included in this kit are the pinion bearings and races, pilot bearing (if applicable), crush sleeve (if applicable), complete pinion shim kit, pinion nut, thread locker, and marking compound with brush. Yukon does extensive research for each application to make sure your kit will arrive with all the correct parts you need to install your pinion gear.
Product Features:
See More
Product Features:
- Fits Ford 9″ with oversize Daytona pinion support
- 28 spline
- Included are pinion bearings and races, pinion seal, pinion nut, crush sleeve, complete pinion shim kit, and marking compound with brush.
Yukon Gear – Outer Axle Seal For 8" Ford (Part No.30031)
from
$43.99
Outer axle seal for 8″ Ford.Yukon Mighty seal.
Product Features:
See More
Product Features:
- Outer axle seal
- Fits Ford 8″
Motive Gear – Differential Master Bearing Kit – Timken (Part No.R9R306MK)
from
$143.99
Motive Gear Differential Bearing Kits Include Front & Rear Pinion Bearing, Pinion Seal, Carrier Bearings, Pilot Bearing Where Applicable, Gear Marking Compound, Crush Sleeve, Pinion Nut, Brush, Thread Locking Compound And Cover Gasket Or Rtv
Product Features:
See More
Product Features:
- MASTER KIT FORD 9″ W/ DAYTONA
Dorman – Help – Differential Shaft Lock Bolt (Part No.81048)
from
$5.99
This differential pinion shaft lock bolt is designed to match the fit and function of the original part on specified vehicles. Made of quality materials, it is engineered for reliable performance.
Product Features:
See More
Product Features:
- Direct replacement – this differential pinion shaft lock bolt matches the fit and function of the factory part on specified years, makes and models
- Ideal solution – this bolt is a reliable replacement for an original part that is missing or has failed due to fatigue
- Durable construction – this part is made from quality materials to ensure reliable performance and long service life
- Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience
Pro-King – Differential Bearing Cone (Part No.742G255)
from
$19.79
Pro-King is the leading supplier of transmission and driveline products in the aftermarket.
Product Features:
See More
Product Features:
- All products are designed to meet or exceed OE quality, form, fit and funtion.
Yukon Gear – Grizzly Locker For Ford 9" With 31 Spline Axles, Racing Design (Part No.28010)
from
$1183.99
The Yukon Grizzly Locker is the ultimate in locking differentials for street, off-road, & drag racing. Grizzly Lockers provide 100% power to both tires, while still allowing for disengagement while negotiating turns. This unit requires the use of a 3.250″ dropout. Use carrier bearing/race numbers LM104949/LM104911. The Yukon Grizzly locker uses 8620 internals and a patented design to provide maximum strength and reduce common failures. Assembled in the USA! This unit has been approved for competition in NASCAR National & Touring series. This is a race unit designed for extreme off road use or racing. All Grizzly Lockers are backed by the best warranty in the business! Yukon covers the replacement unit and covers any collaterally damaged parts and associated labor, up to $2,000! This locker also fits 9.5″ & 10″ dropouts.
Product Features:
See More
Product Features:
- Fits Ford 9″ with 31 spline axles
- Patented internal design reduces common locker failures
- 8620 internals for added strength
- Assembled in the USA
- Aggressive design for racing applications only
Yukon Gear – Wheel Lug Stud (Part No.33571)
from
$7.99
Wheel Lug Stud
Yukon Gear – Flange Yoke For 8.8" Ford Passenger And 8.8" Ford IFS Truck (4.3" Od) (Part No.41048)
from
$286.99
Yukon flange yoke for 8.8″ Ford passenger and 8.8″ Ford IFS truck (4.3″ OD). All Yukon yokes come with a one year warranty against manufacturing defects.
Product Features:
See More
Product Features:
- Fits Ford 8.8″
- 30 spline
- Round companion flange
- 4.3″ O.D.
Yukon Gear – 8.8" Ford Tracloc Clutch Set (Carbon), Both Sides, 2003-2010 Cobra Svt (Part No.16104)
from
$342.99
8.8″ Ford TracLoc clutch set (Carbon), both sides, 2003-2010 Cobra SVT.
Product Features:
See More
Product Features:
- Clutch kit
- Fits Ford 8.8″ trac Loc positraction
- Carbon fiber clutches
Yukon Gear – 8.8" Ford 7/8" Diameter Notched Cross Pin Shaft (.875" For ’86 And Newer) (Part No.33434)
from
$57.99
8.8″ Ford 7/8″ diameter Notched cross pin shaft (.875″ for ’86 and newer). This cross pin shaft is not compatible with Powertrax Lock Rights or Spartan Lockers.
Product Features:
See More
Product Features:
- Notched cross pin shaft for Ford 8.8″
- 0.875″ diameter
- Not compatible with Spartan Locker or Powertrax Lock Right
EMPI/Empire – Axle Nut (Part No.K4030200229EMP)
from
$7.22
Axle Nut
Yukon Gear – Standard Open Spider Gear Kit For 8.8" Ford (And IFS) With 28 Spline Axles (Part No.16019)
from
$285.99
Yukon standard open spider gear kit for 8.8″ Ford (and IFS) with 28 spline axles and 3/4″ pin. Yukon uses higher quality materials and better techniques than OEM to ensure a longer lasting spider gear set. All components come with a one year warranty against manufacturing defects.
Product Features:
See More
Product Features:
- Spider gear kit
- Fit Ford 8.8″ open differential with 28 spline axles
- Includes two side gears, two pinion gears, cross pin shaft, cross pin bolt and spider gear thrust washers.
Yukon Gear – R1563Tav Rear Axle Bearing And Seal Kit (Part No.10004)
from
$42.99
Yukon axle bearing & seal kits are specially designed for each application & use all high quality bearings & seals. R1563TAV axle bearing and seal kit, TorringtonBrand, 2.250″ OD, 1.400″ ID. This axle bearing & seal kit services one side only.
Product Features:
See More
Product Features:
- Includes axle bearing and seal
- Services one side
- Torrington Brand
- 2.250″ O.D.
- 1.400″ I.D.
Yukon Gear – Super Carrier Shim Kit For Ford 8.8", GM 12 Bolt Car & Truck, 8.6 & Vette (Part No.55002)
from
$52.99
Product Features:
See More
- Super carrier shim kit for Ford 8.8″, GM 12 bolt passenger car and truck, GM 8.0″, 8.6″, 8.6″ IRS and 1963-1979 Corvette
- Interlocking design makes installation much easier
Yukon Gear – Outer Oil Slinger For Ford 7.5", 8.8", 9", 10.25" (Part No.33022)
from
$8.99
Replacement outer oil slinger for Ford 7.5″, 8.8″, 9″, 10.25″, Nissan Titan rear, Dana 44 Rubicon & 44 JK non-Rubicon.
Product Features:
See More
Product Features:
- Outer oil slinger for Ford 10.25″, 7.5″, 8.8″ and 9″ also Jeep JK and Nissan Titan rear
Pro-King – Crush Sleeve (Part No.721A034)
from
$2.89
Pro-King is the leading supplier of transmission and driveline products in the aftermarket.
Product Features:
See More
Product Features:
- All products are designed to meet or exceed OE quality, form, fit and funtion.
National – Shaft Repair Sleeve (Part No.99187)
from
$41.99
National® has built a reputation as one of the most respected names in the industry. We have offered premium sealing solutions for more than 75 years. Our design team keeps pace with the industry and provides advanced solutions for today’s vehicles.
Product Features:
See More
Product Features:
- Designed to repair damaged, grooved or worn shafts
- Durable stainless steel construction for corrosion-free sealing surface that surpasses most original shaft specifications
- Ideal for a shaft where indications of seal wear, such as tracks or grooves have developed
- Ultra-thin construction (0.01/0.25mm wall thickness) allows original seal size to be used with minimal additional lip loading
- Easy to install with removable flange and installation tool
- Installation tool reduces sleeve distortion and allows for installation without removal from the shaft
Yukon Gear – Standard Open Side Gear And Thrust Washer For 7.5" Ford (Part No.33295)
from
$19.99
Standard Open side gear thrust washer for 7.5″ Ford.
Product Features:
See More
Product Features:
- Side gear thrust washer
- Fits Ford 7.5″
Motive Gear – Axle Shaft (Part No.MG1231)
from
$143.99
The Motive Gear replacement axle shaft offers an OE-quality axle shaft at a fraction of the OE cost. Manufactured from 1541H material on high-tolerance CNC equipment, this axle shaft is designed to provide a perfect fit every time.
Product Features:
See More
Product Features:
- AXLE SHAFT 8.8″ 28 SPL. 29 1/4″ 79-93 MUSTANG L & R
National – Shaft Repair Sleeve (Part No.99196)
from
$33.99
National® has built a reputation as one of the most respected names in the industry. We have offered premium sealing solutions for more than 75 years. Our design team keeps pace with the industry and provides advanced solutions for today’s vehicles.
Product Features:
See More
Product Features:
- Designed to repair damaged, grooved or worn shafts
- Durable stainless steel construction for corrosion-free sealing surface that surpasses most original shaft specifications
- Ideal for a shaft where indications of seal wear, such as tracks or grooves have developed
- Ultra-thin construction (0.01/0.25mm wall thickness) allows original seal size to be used with minimal additional lip loading
- Easy to install with removable flange and installation tool
- Installation tool reduces sleeve distortion and allows for installation without removal from the shaft
Yukon Gear – Conversion Bearing For Small Bearing Ford 9" Axle In Large Bearing Housing (Part No.18046)
from
$83.99
Conversion bearing for small bearing Ford 9″ axle in large bearing housing.
Product Features:
See More
Product Features:
- Axle bearing
- Fits Ford 9″
- Conversion bearing to install small bearing axle into large bearing housing
- 3.150″ O.D.
- 1.377″ I.D.
Popular 1987 Mercury Cougar Drivetrains Categories
1987 Mercury Cougar Drivetrains
You count on your 1987 Mercury Cougar to run right. That means taking care of it with regular maintenance, necessary repairs, and the right parts. Advance Auto Parts can help with all of that thanks to our extensive inventory of trusted Drivetrains. With 218 Drivetrains ranging in price from $0.99 to $1,099.99, you’re sure to find everything you need for your 1987 Mercury Cougar.
Brands matter. If you want to shop a specific Drivetrains brand, we stock 16 different brands like Moog, DriveWorks, and Felpro. 1987 Mercury Cougar Drivetrains start as low as $0.99!
One of the best ways to find top quality OEM or aftermarket Drivetrains is by asking professionals. Short of that, you can shop with confidence thanks to our 1,829 extensive product reviews on 1987 Mercury Cougar Drivetrains. Some of the top-rated Drivetrains products we carry are Multi Purpose Seal with 4.1 stars and Axle Repair Bearing with 3.6 stars.
Did we mention you can order your Drivetrains from our online catalog and have them shipped right to your garage? Or, if you feel like seeing the parts first-hand, search for your nearest Advance Auto Parts location above and pick up in-store when you’re ready. Browse our full Drivetrains inventory for your 1987 Mercury Cougar below to get started!
Top-Rated Drivetrains Brands For Your 1987 Mercury Cougar
Trusted Drivetrains OEM and aftermarket product brands are what Advance Auto Parts specializes in. The brands we work with are sure to keep that 1987 Mercury Cougar running right for years to come. In our inventory you’ll find brands like Moog, DriveWorks, Felpro, and even more.
Popular Powertrax Drivetrains
You’ll find popular Powertrax brand products across Differentials. All are waiting to get your 1987 Mercury Cougar back on the road. Some of the top-rated Powertrax products in these categories are:
Top-Rated MOOG Driveline Products Drivetrains
If MOOG Driveline Products are what you’re looking for, our inventory holds plenty. We stock MOOG Driveline Products brand Drivetrains for your 1987 Mercury Cougar, and some of our most reviewed MOOG Driveline Products parts include:
FAQs for 1987 Mercury Cougar Drivetrains
What are the most purchased Drivetrains for the 1987 Mercury Cougar?
Out of 218 Drivetrains for the 1987 Mercury Cougar, the most popular in our inventory are:
What are the top-rated 1987 Mercury Cougar Drivetrains?
Top-rated Drivetrains for your 1987 Mercury Cougar based on customer reviews/ratings are:
from
$16.49
(19)
Axle Repair Bearing
“Up and running again with no more axle seal leaks in my Grand Marquis with 318k miles on it!”
from
$28.99
(12)
Universal Joint
“No problems with Installation and appears to be quality part! Great for my old School Street Car!”
