1987 Mercedes-Benz 300SDL Cooling and Climate Controls
More 1987 Mercedes-Benz 300SDL Cooling and Climate Controls Categories
If you’re looking for an original Cooling and Climate Controls replacement for a 1987 Mercedes-Benz 300SDL, you can search through our selection below. You’ll also find aftermarket and OEM Cooling and Climate Controls to meet your needs.
Essential 1987 Mercedes-Benz 300SDL Cooling and Climate Controls
Behr – Hella Service Visco® Engine Cooling Fan clutch (Part No.G501081391BEH)
from
$296.83
The Visco® clutch has the task of making the frictional connection to the fan wheel depending on the temperature, and influencing its speed. The drive torque is transferred by means of wear-free viscous friction to the fan wheel, the continuously variable speed of which is set on the basis of the operating conditions. In the case of the electrically-driven Visco® clutch, control takes place directly via sensors. Requirement-based cooling optimizes the coolant temperature, engine noise and fuel consumption.
Product Features:
See More
Product Features:
- Out of box, drop in replacements
- Factory mounts for easy install
- Exact fit
- Reduced labor time
- Higher customer satisfaction
Permatex – Water Pump & Thermostat RTV Silicone Gasket Maker, 0.5 OZ (Part No.22071)
from
$6.99
Permatex Water Pump & Thermostat RTV Silicone Gasket Maker is a noncorrosive, sensor-safe RTV silicone gasket material formulated for water pumps and thermostat housings. Permatex Water Pump & Thermostat has the highest water-glycol resistance available in an RTV silicone.
Product Features:
See More
Product Features:
- Sensor-safe, noncorrosive RTV silicone gasket material
- Formulated specifically for water pumps and thermostat housings
- Highest water-glycol resistance available in RTV silicone
- Superior adhesion and flexibility
- Can be used as a gasket maker or dressing
Nissens – Nissens Heater Core (Part No.R300070302NSS)
from
$138.01
Nissens manufactures a direct fit Heater Core that guarantees OEM quality, fit and performance.
Product Features:
See More
Product Features:
- OEM Quality Direct fit Application
- Meets or exceeds OEM specifications.
- Utilizes the factory style mounts, connectors and fittings.
- Provides exceptional reliability.
Behr – A/C Pressure Switch (Part No.R1054178181BEH)
from
$22.52
Behr GmbH & Co. KG, Stuttgart, is a specialist for automotive air conditioning and engine cooling systems, the Behr Group is one of the world’s leading manufacturers and suppliers of Original Equipment cooling and air conditioning products for European passenger and commercial vehicles. 2 bar low pressure and 30 bar high pressure binary switch. This switch is designed to be compatible with R-12 and R134a refrigerants. Located on receiver-drier with 2 spade terminals. Used for compressor cut-out.
See More
Dorman – Electrical Harness – 2-Wire GM A/C Clutch with Diode (Part No.85143)
from
$11.99
This HVAC clutch coil connector is designed to match the appearance and function of the original hardware on specified applications. Made of quality materials, it is engineered for reliable performance and durability.
Product Features:
See More
Product Features:
- Direct replacement – this HVAC clutch coil connector matches the appearance and function of the factory hardware on specified applications
- Ideal solution – this connector is a reliable replacement for an original part that is missing or has failed due to fatigue
- Durable construction – this part is made from quality materials to ensure reliable performance and long service life
- Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience
Carquest Premium – New Compressor with Clutch, GM R4 Heavy (Part No.T58228)
from
$315.99
High quality OE replacement part with all components needed to complete the job
Product Features:
See More
Product Features:
- All compressors go through sophisticated testing and leak test processes
- Includes specific electrical connector to eliminate splicing
- For ease of installation this compressor includes all gaskets, O-rings or sealing washers needed to repair your car
- Built in a TS16949 certified manufacturing environment to ensure consistent quality that meets or exceeds OE specifications for fit, form, function, and durability
- Double lip shaft seal to reduce refrigerant leakage over time requiring less maintenance
Dorman – 5-Wire Style Relay (Part No.85170)
from
$15.99
This HVAC relay connector is designed to match the appearance and function of the original hardware on specified applications. Made of quality materials, it is engineered for reliable performance and durability.
Product Features:
See More
Product Features:
- Direct replacement – this HVAC relay connector matches the appearance and function of the factory hardware on specified applications
- Ideal solution – this connector is a reliable replacement for an original part that is missing or has failed due to fatigue
- Durable construction – this part is made from quality materials to ensure reliable performance and long service life
- Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience
Factory Air – Green Round O-Ring (Part No.24610)
from
$0.99
Made from HNBR material; Compatible with R12 And R134A; High quality construction; Universal applications
See More
Hella – Coolant Level Sensor (Part No.G105016387HEL)
from
$38.56
Coolant Level Sensor
National – Bearings (Part No.5000-KFF)
from
$29.99
National Oil Seals & Bearings offer a full line of premium oil seals and bearings.
Product Features:
See More
Product Features:
- Premium bearing design matches OEM specifications
- Precision manufactured using premium-grade steel for outstanding durability and performance
- Controlled heat treating process for lasting performance and extended bearing life
- Industry leading coverage
- Professional technicians know they can depend on National
Behr – A/C Temp. Switch (Part No.R105529376BEH)
from
$40.85
A/C Temp. Switch
Permatex – The Right Stuff Grey Instant Gasket Maker, 147ml Cartridge (Part No.34311)
from
$28.49
Specifically designed to perform under higher torque loads associated with engines having closely spaced bolt patterns (typically import vehicles). This product is blowout resistant, allowing leakproof gaskets to be made and put into service in just one minute. Sensor-safe, The Right Stuff GREY seals instantly, forming a reliable, long lasting elastomeric rubber gasket that outperforms pre-molded gaskets. Specified by major import OEMs, this material is resistant to powertrain fluids (oil, coolant and ATF) and operates in environments to 450°F (232°C) continuous; 500°F (260°C) intermittent.
Product Features:
See More
Product Features:
- Ideal for rigid cast aluminum parts
- Meets OEM Specifications
- Sensor safe & non-corrosive
- Performs under higher torque loads associated with engines having closely spaced bolt patterns (typical of import vehicles)
- Blowout resistant, allowing leakproof gaskets to be made in just one minute
- Seals instantly, forming a reliable, long lasting elastomeric rubber gasket
- Superior resistance to powertrain fluids including engine oil, transmission fluid, gear lube and coolants
- Temperature range -60°C to 260°C (-75°F to 500°F) intermittent
- Applications: Automotive, industrial and marine gaskets, valve covers, gearbox covers, pumps, compressors, oil pans, thermostat housings, water pumps, etc.
Permatex – Sensor-Safe, High-Torque RTV Silicone Gasket Maker (Part No.82194)
from
$11.49
Permatex Ultra Grey is specified for high torque and high vibration applications. Ultra Grey offers a sensor-safe, low odor, non-corrosive formula and is OEM specified to fit dealership warranty requirements. This high performance gasket maker meets performance specs of OE silicone gaskets and can be used on high torque and vibration applications such as valve covers, water pump, intake manifold end seals ad thermostat housings.
Product Features:
See More
Product Features:
- High torque and rigidity
- Sensor-safe, non-corrosive formula
- OEM specified
- Low-odor, non-corrosive formula
- Ideal for closed spaced bolt patterns
ACM – Air Conditioning Manifold Seal Kit (Part No.R111169968ACM)
from
$5.41
ACM is a supplier of Original Equipment quality climate control products. Seal rings for suction and delivery lines.
See More
Carquest Premium – A/C Filter Drier (Part No.T33384)
from
$47.99
Carquest Accumulators and Receiver Driers are designed to store, filter and dry the air conditioning refrigerant to provide proper performance and durability for the air conditioning system. They are manufactured to meet or exceed original equipment specifications.
Product Features:
See More
Product Features:
- All parts meet or exceed original equipment standards for moisture absorption, pressure and temperature resistance, air tightness, vibration resistance, corrosiveness, and pulse pressure.
- Desiccant is 100% tested and assembled in a controlled environment to ensure performance meets or exceeds original equipment standards.
- All accumulators and receiver driers are helium leak tested prior to packaging.
- O-Rings necessary for installation are included.
- O-Rings necessary for installation are included.
Meistersatz – Oil Drain Plug Gaske (Part No.A6120860165MEI)
from
$0.62
Oil Drain Plug Gaske
Carquest Premium – Thermostat (Part No.48038)
from
$11.99
Original equipment design provides exact fit and performance.
Product Features:
See More
Product Features:
- Precise fitting sealing edges prevent leakage and premature cooling.
- Self-cleaning and self-aligning thermostat valve.
- Stainless steel assembly and springs are engineered for long life and smooth performance.
Factory Air – Sealing Washer Kit (Part No.24338)
from
$5.29
Includes O-Ring; Compatible with R12 And R134A; High quality construction; Universal applications
See More
Geba – Water Pump (Part No.G3000948841GEB)
from
$75.33
The GEBA Water Pump contains no remanufactured components and is manufactured to ensure high efficiency and optimal cooling under all conditions. Geba maintenance free Bearings with ball and roller spindle bearings are designed for the highest axial and radial stresses. Up to Date unitized sealing technology ensure optimal leak tightness and longevity. All housings are examined before the assembly. This procedure guarantees high reliability and life span of GEBA water pumps.
Product Features:
See More
Product Features:
- OE-Equivalent and direct fit application.
- 100% new with no remanufactured parts.
- High quality cast aluminum.
- Advanced bearing design for high axial and radial stresses.
- Unitized sealing technology that ensures optimal leak tightness and longevity.
- Optimum cooling performance and longevity.
Behr – Radiator Drain Plug (Part No.G106011756BEH)
from
$11.09
Radiator Drain Plug
Factory Air – Green Round O-Ring (Part No.24615)
from
$1.99
Made from HNBR material; Compatible with R12 And R134A; High quality construction; Universal applications
See More
Carquest Premium – Radiator Cap Tester Adapter (Part No.12552)
from
$14.29
Tester adapter for the MT-300 cooling system pressure testers. Professional grade test equipment to ensure an automotive cooling system is operating at the correct pressure. Made from high quality materials to ensure durability. Designed to test automotive coolant caps.
Product Features:
See More
Product Features:
- Machined metal construction
- Works with MT-300 pressure tester
- Tests coolant caps
- Professional quality
Rein – Cap-Expansion Tank (Part No.CPE0026P)
from
$11.49
Rein Automotive OE Quality expansion tank caps are designed to be direct replacements for OE caps. Rein caps are designed to match or exceed the OE materials used and are produced to the highest standards to ensure long service life. Rein Automotive OE quality expansion tank caps keep the coolant system at the proper pressure just like the OE cap.
Product Features:
See More
Product Features:
- Manufactured to strict engineering standards/specifications in materials and tolerances.
- Direct fit.
- Meets or exceeds pressure specifications demanded by the OE manufacturer.
- Produced by an original equipment supplier.
Factory Air – New Nippondenso 10P Clutch Assembly w/ Coil (Part No.47599)
from
$242.99
High quality OE replacement part with all components needed to complete the job
Product Features:
See More
Product Features:
- All mounting hardware included
- Every coil tested for proper ohms
- Vehicle specific applications
- Coated to prevent corrosion
Behr – Air Conditioning Evaporator, Without Valve (Part No.R113044442BEH)
from
$204.08
Air Conditioning Evaporator, Without Valve
Popular 1987 Mercedes-Benz 300SDL Cooling and Climate Controls Categories
1987 Mercedes-Benz 300SDL Cooling and Climate Controls
You count on your 1987 Mercedes-Benz 300SDL to run right. That means taking care of it with regular maintenance, necessary repairs, and the right parts. Advance Auto Parts can help with all of that thanks to our extensive inventory of trusted Cooling and Climate Controls. With 58 Cooling and Climate Controls ranging in price from $0.62 to $519.99, you’re sure to find everything you need for your 1987 Mercedes-Benz 300SDL.
Brands matter. If you want to shop a specific Cooling and Climate Controls brand, we stock 24 different brands like Permatex, Carquest Premium, and Factory Air. 1987 Mercedes-Benz 300SDL Cooling and Climate Controls start as low as $0.62!
One of the best ways to find top quality OEM or aftermarket Cooling and Climate Controls is by asking professionals. Short of that, you can shop with confidence thanks to our 425 extensive product reviews on 1987 Mercedes-Benz 300SDL Cooling and Climate Controls. Some of the top-rated Cooling and Climate Controls products we carry are Radiator Cap: 20 PSI with 5.0 stars and Standard Thermostat: 180 Degrees with 3.5 stars.
Did we mention you can order your Cooling and Climate Controls from our online catalog and have them shipped right to your garage? Or, if you feel like seeing the parts first-hand, search for your nearest Advance Auto Parts location above and pick up in-store when you’re ready. Browse our full Cooling and Climate Controls inventory for your 1987 Mercedes-Benz 300SDL below to get started!
Top-Rated Cooling and Climate Controls Brands For Your 1987 Mercedes-Benz 300SDL
Trusted Cooling and Climate Controls OEM and aftermarket product brands are what Advance Auto Parts specializes in. The brands we work with are sure to keep that 1987 Mercedes-Benz 300SDL running right for years to come. In our inventory you’ll find brands like Permatex, Carquest Premium, Factory Air, and even more.
Popular Carquest Standard Cooling and Climate Controls
You’ll find popular Carquest Standard brand products across Air Conditioning Parts. All are waiting to get your 1987 Mercedes-Benz 300SDL back on the road. Some of the top-rated Carquest Standard products in these categories are:
Top-Rated Permatex Cooling and Climate Controls
If Permatex are what you’re looking for, our inventory holds plenty. We stock Permatex brand Cooling and Climate Controls for your 1987 Mercedes-Benz 300SDL, and some of our most reviewed Permatex parts include:
from
$6.99
(288)
Water Pump & Thermostat RTV Silicone Gasket Maker, 0.5 OZ
Engine Water Pump Inlet Pipe Gaskets
from
$6.99
(9)
Sensor-Safe, High Torque RTV Silicone Gasket Maker
Engine Water Pump Inlet Pipe Gaskets
FAQs for 1987 Mercedes-Benz 300SDL Cooling and Climate Controls
What are the most purchased Cooling and Climate Controls for the 1987 Mercedes-Benz 300SDL?
Out of 58 Cooling and Climate Controls for the 1987 Mercedes-Benz 300SDL, the most popular in our inventory are:
from
$19.99
(2)
The Right Stuff: 1 Minute Gasket Maker: Grey, 3 OZ
Engine Water Pump Inlet Pipe Gaskets
What are the top-rated 1987 Mercedes-Benz 300SDL Cooling and Climate Controls?
Top-rated Cooling and Climate Controls for your 1987 Mercedes-Benz 300SDL based on customer reviews/ratings are:
from
$22.99
(2)
Standard Thermostat: 180 Degrees
“Perfect fit, this is the correct spec. temperature for my 240D. I think the old one was a higher temp. put in by the previous owner. The car is runnin”
from
$44.99
(1)
A/C Block Type O-Ring Expansion Valve
“The one delegated for 99’s did not have the two mounting holes required by my car. I actually needed the 2000 year model valve. That one worked great.”
