1987 GMC R1500 Drivetrains
Find Your Specific 1987 GMC R1500 Drivetrains
Below you will find various in-demand GMC Drivetrains, components and accessories for your 1987 R1500. Advance Auto Parts has popular R1500 parts like 4WD Components, Drive Shafts and Axles, Universal Joints and more. You’ll also find aftermarket and OEM Drivetrains for other R1500 model years. Select a category of 1987 GMC R1500 Drivetrains below and start saving instantly.
Popular 1987 GMC R1500 Drivetrains Categories
Essential Drivetrains for 1987 GMC R1500s
Yukon Gear – Master Overhaul Kit for GM 8.5" Differential with Aftermarket Positraction (Part No.14088)
from
$309.99
Yukon Master Overhaul Kits give you all the high-quality parts you need to start and finish every differential job. Yukon offers more tailor-made kits than any other manufacturer in the industry to meet your specific installation needs. This kit uses Timken bearings and races along with high quality seals and small parts. Yukon Master Overhaul Kits are the most comprehensive and complete kits on the market because Yukon does extensive research to ensure that every kit has everything you need for your application.
Product Features:
See More
Product Features:
- Included are Timken bearings and races along with high quality seals and small parts.
- Included in this kit are carrier bearings and races, pinion bearings and races, pinion seal, complete shim kit, ring gear bolts, pinion nut, crush sleeve , thread locker, marking compound with brush, and gasket.
- Fits GM 8.5″ rear with aftermarket Positraction
Dorman – Spindle Washer – I.D. 3/4 In. O.D. 1-21/32 In. Thickness 3/32 In. (Part No.618-005.1)
from
$3.99
This spindle nut washer is designed to match the fit and function of the original part on specified vehicles. Made of quality materials, it is engineered for reliable performance.
Product Features:
See More
Product Features:
- Direct replacement – this spindle nut washer matches the fit and function of the factory part on specified years, makes and models
- Ideal solution – this washer is a reliable replacement for an original part that is missing or has failed due to wear
- Durable construction – this part is made from quality materials to ensure reliable performance and long service life
- Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience
Yukon Gear – 1330 U/Joint U-Bolts, 5/16" X 1-9/16", (7260 & 7290 Billet) (Part No.41199)
from
$15.99
1330 U/joint U-bolts, 5/16″ X 1-9/16″, (7260 & 7290 BILLET).
Product Features:
See More
Product Features:
- u-joint u-bolt kit
- Fits AMC Model 20, Dana Spicer 30 and 44, GM 8.2″, 12 bolt passenger car and truck and 1963-1979 Corvette
- 1330 u-joint size
- Includes two u-bolts and four nuts
Dorman – Spindle Nut 3/4 In.-20 Hex Size 1-1/16 In. (Part No.615-065.1)
from
$7.99
This spindle nut is designed to match the fit and function of the original part on specified vehicles. Made of quality materials, it is engineered for reliable performance.
Product Features:
See More
Product Features:
- Direct replacement – this spindle nut matches the fit and function of the factory part on specified years, makes and models
- Ideal solution – this nut is a reliable replacement for an original part that is missing or has failed due to fatigue
- Durable construction – this part is made from quality materials to ensure reliable performance and long service life
- Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience
Dorman – Help – Axle Shaft Lock Assortment (Part No.81050)
from
$6.99
This drive axle shaft lock C-clip is designed to match the fit and function of the original part on specified vehicles. Made of quality materials, it is engineered for reliable performance.
Product Features:
See More
Product Features:
- Direct replacement – this drive axle shaft lock C-clip matches the fit and function of the factory part on specified years, makes and models
- Ideal solution – this clip is a reliable replacement for an original part that is missing or has failed due to fatigue
- Durable construction – this part is made from quality materials to ensure reliable performance and long service life
- Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience
Yukon Gear – Bearing Race Driver for Popular Ford, Gm, Chrysler, and Dana Differentials (Part No.56017)
from
$215.99
Yukon Gear & Axle offers a full line of top quality differential tools to save time and money.
Product Features:
See More
Product Features:
- Fits HM89410 race
- For accurate installation of bearing races
- All-steel construction
Yukon Gear – 14 Plate Carbon Clutches, GM 8.2"/GM 8.5"/12T/12P/Ford 8.8"/Cast Iron Vette (Part No.16041)
from
$404.99
Yukon Gear & Axle clutch kits fit popular GM diffs outfitted with a Yukon Dura Grip positraction unit feature 14 advanced carbon clutch plates, ensuring total traction and long-lasting performance.
Product Features:
See More
Product Features:
- Clutch kit
- Fits Ford 8.8″, 1963-1979 Corvette, GM 12 bolt passenger car and truck, 8.2″, 8.5″ and 8.6″ Dura Grip positraction
- 14 piece kit
- Carbon fiber clutches
National – Multi Purpose Seal (Part No.7412S)
from
$4.99
National has built a reputation as one of the most respected names in the industry. We have offered premium sealing solutions for more than 75 years. Our design team keeps pace with the industry and provides advanced solutions for today’s vehicles.
Product Features:
See More
Product Features:
- Design type: spring loaded; single-lip
- Temperature range: -40 deg. F to 225 deg. F / -40 deg. C to 107 deg. C
- Good low temperature capability
- Low swell in hydrocarbon fluids
- Delivers quality and reliable performance for every type of repair
Powertrax – Differential Lock Assembly (Part No.9207853005)
from
$544.99
For vehicles that are driven daily, the Power Trax No-Slip Traction System is the latest design in quiet traction-adding differential technology. It combines the automatic street-friendly smooth operation of a limited-slip differential with the traction performance of a locking differential. The Power Trax No-Slip locker easily installs in to your differential carrier using basic tools and without affecting your ring and pinion settings. Power Trax Grip-Lok, Lock-Right Lockers and No-Slip Traction Systems automatically provide 100% traction on-demand, under the toughest circumstances. The Power Trax Grip-Pro and Grip-LS performance limited slips offer smooth dependable torque transfer and traction for the best of both worlds.
Product Features:
See More
Product Features:
- The Power Trax Lock-Right Locker provides outstanding traction for off-road machines and race vehicles. Power Trax No-Slip Traction Systems deliver excellent performance to street-driven cars and trucks.
- Power Trax lockers range from the original, Lock-Right for serious straight-line performance, to the No-Slip traction system for street-able vehicles.
- Power Trax offers three levels of GRIP locking differentials, ranging from the clutch-type GRIP LS with a forged steel case, the gear-driven GRIP PRO and finally the GRIP LOK for extreme traction.
- Power Trax ia an Extreme Traction System
Pro-King – Differential Crush Sleeve (Part No.742G034)
from
$2.99
Pro-King is the leading supplier of transmission and driveline products in the aftermarket.
Product Features:
See More
Product Features:
- Meets or exceeds OE specifications
Yukon Gear – 1350 U/Joint With Zerk Fitting (Part No.42010)
from
$51.99
Yukon 1350 U/Joint with zerk fitting. 3.625″ snap ring span, 1.118″ cap diameter. Outside snap ring.
Product Features:
See More
Product Features:
- Fits standard rotation Dana Spicer 44
- 8.50″ ring gear diameter
- 26 spline pinion
- 10 ring gear bolts
- 5.13 ratio
Powertrax – Differential Lock Assembly (Part No.9207883005)
from
$551.99
For vehicles that are driven daily, the Power Trax No-Slip Traction System is the latest design in quiet traction-adding differential technology. It combines the automatic street-friendly smooth operation of a limited-slip differential with the traction performance of a locking differential. The Power Trax No-Slip locker easily installs in to your differential carrier using basic tools and without affecting your ring and pinion settings. Power Trax Grip-Lok, Lock-Right Lockers and No-Slip Traction Systems automatically provide 100% traction on-demand, under the toughest circumstances. The Power Trax Grip-Pro and Grip-LS performance limited slips offer smooth dependable torque transfer and traction for the best of both worlds.
Product Features:
See More
Product Features:
- The Power Trax Lock-Right Locker provides outstanding traction for off-road machines and race vehicles. Power Trax No-Slip Traction Systems deliver excellent performance to street-driven cars and trucks.
- Power Trax lockers range from the original, Lock-Right for serious straight-line performance, to the No-Slip traction system for street-able vehicles.
- Power Trax offers three levels of GRIP locking differentials, ranging from the clutch-type GRIP LS with a forged steel case, the gear-driven GRIP PRO and finally the GRIP LOK for extreme traction.
- Power Trax ia an Extreme Traction System
Yukon Gear – C/Clip (Part No.33083)
from
$8.99
Yukon Gear & Axle manufactures a full line of top quality small parts to complete any job including ring gear bolts, crush sleeves, pinion nuts and washers, axle studs, thrust washers and much, much more. For all your differential small parts needs, look no further than Yukon.
Product Features:
See More
Product Features:
- c-clip for Chrysler 8.25″, Ford 8.8″, GM 12 bolt car and truck and GM 8.2″, 8.5″ and 8.6″
- .150″ thick
Yukon Gear – GM 12 Bolt Truck Cover Gasket (Part No.23015)
National – Bearing (Part No.M88048)
from
$15.99
National Oil Seals & Bearings offer a full line of premium oil seals and bearings.
Product Features:
See More
Product Features:
- PREMIUM MATERIALS — Precision manufactured using premium-grade steel for outstanding durability and performance
- SMOOTH ROTATION — Crowned raceways and rollers for even load distribution
- OE-STYLE DESIGN — Engineered to meet OE specifications
- COMPREHENSIVE COVERAGE — Industry-leading coverage for domestic and import applications
- RIGOROUS TESTING — Comprehensive testing throughout design and development processes by National engineers for quality you can count on
Yukon Gear – 12P, 12T, CI Vet, & 55GM 8460N Redi Sleeve Yoke Saver (Part No.30225)
from
$109.99
Yukon Mighty Seals use the latest design and manufacturing technologies to produce a precision fit that seals tight and lasts for years to come.
Product Features:
See More
Product Features:
- Pinion Redi-sleeve
- Fits GM 12 bolt passenger car, 12 bolt truck and 1963-1979 Corvette
USA Standard Gear – Differential Spider Gear Kits (Part No.39027)
from
$214.99
Yukon 35 spline (outside spline) male coupler for 9″ Ford. All Yukon yokes come with a Limited warranty against manufacturing defects.
Product Features:
See More
Product Features:
- Spider gear kit
- Fits GM 8.5″ 30 spline open differential
- Includes two side gears, two pinion gears, cross pin shaft, cross pin bolt and spider gear thrust washers.
Yukon Gear – Chrome Moly Cross Pin Shaft for Mini-Spool for GM 12 Bolt Car and Truck (Part No.32236)
from
$61.99
Yukon Gear & Axle manufactures a full line of top quality small parts to complete any job including ring gear bolts, crush sleeves, pinion nuts and washers, axle studs, thrust washers and much, much more. For all your differential small parts needs, look no further than Yukon.
Product Features:
See More
Product Features:
- Hardened cross pin shaft
- Fits GM 12 bolt passenger car and truck
Yukon Gear – Replacement Inner Axle Seal For Dana 44 (Flanged Axle) (Part No.30303)
from
$7.99
Replacement inner axle seal for Dana 44 (flanged axle) .Yukon Mighty seal.
Product Features:
See More
Product Features:
- Inner axle seal
- Fits Dana Spicer 44 rear with flanged axle
Yukon Gear – Standard Open Carrier Case, GM 8.5", 2.73 & Up (Part No.20083)
from
$239.99
8.5″ GM standard Open case, 2.73 & up, 28 or 30 spline.
Product Features:
See More
Product Features:
- Standard open carrier case
- Fits GM 8.5″ with 28 or 30 spline axles
- 2.73 and up ratio only
- Does not include spider gears
Yukon Gear – Pinion Install Kit for GM 8.5" Differential (Part No.13069)
from
$173.99
Yukon Pinion Installation Kits are a terrific solution for gear installation on lower mileage vehicles where the carrier bearings and races can be reused. This kit features Timken bearings and races along with high-quality seals and small parts. Yukon does extensive research for each application to make sure your kit will arrive with all the correct parts you need to install your gear set.
Product Features:
See More
Product Features:
- Fits GM 8.5″ rear
- Included are pinion bearings and races, pinion seal, crush sleeve , complete pinion shim kit, and marking compound with brush.
Yukon Gear – Forged Yoke for GM 8.5" with A 1350 U/Joint Size. (Part No.41093)
from
$359.99
Yukon Gear and Axle manufactures a complete line of general replacement and performance series of pinion yokes for many street, racing, and heavy-duty off-road applications.
Product Features:
See More
Product Features:
- Fits GM 8.5″
- 30 spline
- 1350 u-joint size
- Outside snap ring design
- 3.625″ snap ring span
- 1.188″ cap diameter
- Forged steel
National – Bearing Race (Part No.M802011)
from
$14.99
Manufactured with premium-grade steel, National taper bearing cups feature crowned raceways to ensure even load distribution.
Product Features:
See More
Product Features:
- PREMIUM MATERIALS – Precision manufactured using premium-grade steel for outstanding durability and performance
- SMOOTH ROTATION – Crowned raceways for even load distribution
- OE-STYLE DESIGN – Engineered to meet OE specifications
- COMPREHENSIVE COVERAGE – Industry-leading coverage for domestic and import applications
- RIGOROUS TESTING – Comprehensive testing throughout design and development processes by National engineers for quality you can count on
Yukon Gear – Cast Yoke for GM 8.5" with A 1350 U/Joint Size. (Part No.41092)
from
$234.99
Yukon Gear and Axle manufactures a complete line of general replacement and performance series of pinion yokes for many street, racing, and heavy-duty off-road applications.
Product Features:
See More
Product Features:
- Fits GM 8.5″
- 30 spline
- 1350 u-joint size
- Outside snap ring design
- 3.625″ snap ring span
- 1.188″ cap diameter
- Strap style
Yukon Gear – Differential (Part No.26052)
from
$709.99
Differential
Pro-King – Differential Carrier Shim Kit (Part No.741A200)
from
$19.99
Pro-King is the leading supplier of transmission and driveline products in the aftermarket.
Product Features:
See More
Product Features:
- Meets or exceeds OE specifications
Schaeffler – Shaft Seal (Part No.SS2987)
from
$16.99
Our wheel seals are engineered using only the highest-quality materials to meet vehicle manufacturer specificatons. We work with suppliers to design seals that meet FAG’s quality standards. Seals are designed to protect wheel end components from contamination – such as dirt, dust, and moisture – and prevent the loss of grease over the life of the bearing. The specifications for wheel seals are very demanding, and the type required depends on the specific application, position and vehicle class.
Product Features:
See More
Product Features:
- High-precision and High-quality components used in all KITs
- Coverage of classic and new high-tech solutions for the best system coverage
Richmond Gear – Differential Mini Spool (Part No.78-1028-1)
from
$124.99
Richmond Gear is the leading manufacturer of professional quality, high-performance drivetrain products. Our complete line of products ranges from high performance ring-and-pinion sets for serious street and racing applications to torque-hungry manual transmissions and components. Richmond Gear products have been winners both at the Daytona 500 and U.S. Nationals for decades. WINNERS RUN RICHMOND!
Product Features:
See More
Product Features:
- For over 80-years, the Richmond Double-Diamond logo has represented some of the highest quality gears in the racing industry. Winners Run Richmond!
- The superior quality of Richmond gearsets is a result of outstanding design, world class manufacturing and an extensive testing process that is performed on all products.
- Richmond performance gearsets have been winners for decades at: NHRA, NMRA, NMCA, Daytona 500, WISSOTA and U.S. Nationals.
- Richmond Gear is a leading manufacturer of high performance ring and pinion gearsets and drivetrain components, backed by a two year warranty.
- Engineered to perform faster and be more reliable, Richmond performance drivetrain products are the result of a continuous research and development program combined with state-of-the-art manufacturing capabilities.
Upgrade your 1987 GMC R1500 with Top-Quality Drivetrains
When it comes to maintaining or upgrading your 1987 GMC R1500, nothing is more important than using high-quality OEM or aftermarket parts that you can trust. Whether you’re repairing damage to your GMC or enhancing its overall performance, Drivetrains are key to keeping your R1500 functioning at its best. At Advance Auto Parts, we offer a wide selection of 286 Drivetrains for the 1987 GMC R1500, designed to meet your needs without breaking the bank.
From
4WD Component
replacements to
Drive Shafts and Axles
upgrades, we’ve got you covered with parts that fit your vehicle perfectly and ensure long-lasting performance.
Affordable Prices and Wide Selection
Shopping for Drivetrains for any vehicle can be a hassle, especially if you’re on a budget. But with Advance Auto Parts, you can find high-quality Drivetrains for your 1987 GMC R1500 at great prices.
Our Drivetrains inventory for this model
ranges from just $2.59 to $1,969.99, with
an average price of $190.92.
Our 286 Drivetrains in stock come from 19 trusted brands, so you’re sure to find the right part for your 1987 GMC R1500 without overspending.
Top Brands and High Customer Satisfaction
Advance Auto Parts takes pride in offering only the best brands in the automotive industry. For your 1987 GMC R1500, we stock popular OEM and aftermarket Drivetrains from top names
like National, Dorman, Motive Gear, and more.
National Drivetrains
start at just $14.99 and boast an impressive 4.3 stars average rating from customers.
Dorman and Motive Gear also bring quality to the table, with Drivetrains available starting at $6.79, and at an average 4.2 stars rating.
With 4,432 customer reviews and counting, our 1987 GMC R1500 Drivetrains have a strong track record of reliability, ensuring you can trust your purchase.
Explore Related Parts and More
While you’re here, don’t forget to check out other essential categories that go hand in hand with Drivetrain upgrades. Explore related part types like Batteries and Chargers, Oil and Lubricants
and more to make sure your 1987 GMC R1500 is always ready to roll. We’re committed to providing you with everything you need to keep your R1500 in top shape, all in one place.
Start shopping confidently below for your 1987 GMC R1500!
Best-Selling 4WD Components for 1987 GMC R1500s
Enhance the driving experience in your GMC with 1 quality 4WD Component components, starting at $297.99.
Warn – HUB 4X4-PREM MAN LCK (Part No.20990)
from
$297.99
HUB 4X4-PREM MAN LCK
Most Popular 1987 GMC R1500 Drive Shafts and Axles
Customize your GMC with 22 Drive Shafts and Axles products
like Axle Shaft Seals,
Center Support Bearings, and
Drive Shaft Center Supports, all
priced under $801.99.
National – Bearing (Part No.M88048)
from
$15.99
National Oil Seals & Bearings offer a full line of premium oil seals and bearings.
Product Features:
See More
Product Features:
- PREMIUM MATERIALS — Precision manufactured using premium-grade steel for outstanding durability and performance
- SMOOTH ROTATION — Crowned raceways and rollers for even load distribution
- OE-STYLE DESIGN — Engineered to meet OE specifications
- COMPREHENSIVE COVERAGE — Industry-leading coverage for domestic and import applications
- RIGOROUS TESTING — Comprehensive testing throughout design and development processes by National engineers for quality you can count on
Anchor – Center Support Bearing Center (Part No.6038)
from
$40.99
Anchor 6038 Center support bearings support a driveshaft between transmission and differential. This mount relieves stress on driveline components. Each part is engineered and designed to OE Standards. Natural and SBR rubber provide maximum life and performance. Steel fasteners are heat treated grade 5 bolts. A special bonding agent is used to ensure a rubber to metal bond. Rubber material is mixed to specific Durometer, hardness.
Product Features:
See More
Product Features:
National – Drive Shaft Center Support Bearing (Part No.HB-206-FF)
from
$46.99
Designed to meet or exceed OE quality, premium-quality bearings from National are manufactured to exacting standards to deliver lasting performance and extended bearing life.
Product Features:
See More
Product Features:
- BUILT TO LAST – Advanced heat treatment process for strength
- PREMIUM MATERIALS – Precision manufactured using premium-grade steel for lasting performance and extended bearing life
- RELIABLE PERFORMANCE – Element size and quantity are engineered to meet or exceed the load rating of OE bearings
- COMPREHENSIVE COVERAGE – Industry-leading coverage for domestic and import applications
- RIGOROUS TESTING – Comprehensive testing throughout design and development processes by National engineers for quality you can count on
National – Multi-Purpose Seal (Part No.8835S)
from
$11.99
National has built a reputation as one of the most respected names in the industry. We have offered premium sealing solutions for more than 75 years. Our design team keeps pace with the industry and provides advanced solutions for today’s vehicles.
Product Features:
See More
Product Features:
- Design type: spring loaded; single-lip
- Temperature range: -40 Deg. F to 225 Deg. F / -40 Deg. C to 107 Deg. C
- Good low temperature capability
- Low swell in hydrocarbon fluids
- Delivers quality and reliable performance for every type of repair
Dorman – Help – Axle Shaft Lock Assortment (Part No.81050)
from
$6.99
This drive axle shaft lock C-clip is designed to match the fit and function of the original part on specified vehicles. Made of quality materials, it is engineered for reliable performance.
Product Features:
See More
Product Features:
- Direct replacement – this drive axle shaft lock C-clip matches the fit and function of the factory part on specified years, makes and models
- Ideal solution – this clip is a reliable replacement for an original part that is missing or has failed due to fatigue
- Durable construction – this part is made from quality materials to ensure reliable performance and long service life
- Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience
National – Drive Shaft Center Support Bearing (Part No.HB-88107-A)
from
$44.99
Designed to meet or exceed OE quality, premium-quality bearings from National are manufactured to exacting standards to deliver lasting performance and extended bearing life.
Product Features:
See More
Product Features:
- BUILT TO LAST – Advanced heat treatment process for strength
- PREMIUM MATERIALS – Precision manufactured using premium-grade steel for lasting performance and extended bearing life
- RELIABLE PERFORMANCE – Element size and quantity are engineered to meet or exceed the load rating of OE bearings
- COMPREHENSIVE COVERAGE – Industry-leading coverage for domestic and import applications
- RIGOROUS TESTING – Comprehensive testing throughout design and development processes by National engineers for quality you can count on
Anchor – Center Support Bearing Center (Part No.6056)
from
$21.99
Anchor 6056 Center support bearings support a driveshaft between transmission and differential. This mount relieves stress on driveline components. Each part is engineered and designed to OE Standards. Natural and SBR rubber provide maximum life and performance. Steel fasteners are heat treated grade 5 bolts. A special bonding agent is used to ensure a rubber to metal bond. Rubber material is mixed to specific Durometer, hardness.
Product Features:
See More
Product Features:
Driveworks – Axle Repair Bearing (Part No.S-RP-6408)
from
$24.49
Value-priced bearing meets all cataloged application requirements.
Product Features:
See More
Product Features:
- Brand may vary by location
Yukon Gear – R1559Tv Rear Axle Bearing And Seal Kit (Part No.10001)
from
$52.99
Yukon axle bearing & seal kits are specially designed for each application & use all high quality bearings & seals. R1559TV axle bearing and seal kit, TorringtonBrand, 2.530″ OD, 1.620″ ID This axle bearing & seal kit services one side only.
Product Features:
See More
Product Features:
- Includes axle bearing and seal
- Services one side
- Torrington Brand
- 2.530″ O.D.
- 1.620″ I.D.
Yukon Gear – C/Clip (Part No.33083)
from
$8.99
Yukon Gear & Axle manufactures a full line of top quality small parts to complete any job including ring gear bolts, crush sleeves, pinion nuts and washers, axle studs, thrust washers and much, much more. For all your differential small parts needs, look no further than Yukon.
Product Features:
See More
Product Features:
- c-clip for Chrysler 8.25″, Ford 8.8″, GM 12 bolt car and truck and GM 8.2″, 8.5″ and 8.6″
- .150″ thick
Yukon Gear – Axle Seal, For 1559 Or 6408 Bearing (Part No.30201)
from
$7.99
Axle seal, for 1559 OR 6408 bearing, NOT COARSE spline 12T.Yukon Mighty seal.
Product Features:
See More
Product Features:
- Rear axle seal
- 2.530″ O.D.
National – Multi Purpose Bearing (Part No.HB-88532)
from
$162.99
Designed to meet or exceed OE quality, premium-quality bearings from National are manufactured to exacting standards to deliver lasting performance and extended bearing life.
Product Features:
See More
Product Features:
- BUILT TO LAST – Advanced heat treatment process for strength
- PREMIUM MATERIALS – Precision manufactured using premium-grade steel for lasting performance and extended bearing life
- RELIABLE PERFORMANCE – Element size and quantity are engineered to meet or exceed the load rating of OE bearings
- COMPREHENSIVE COVERAGE – Industry-leading coverage for domestic and import applications
- RIGOROUS TESTING – Comprehensive testing throughout design and development processes by National engineers for quality you can count on
National – Multi-Purpose Bearing (Part No.88107-BVV)
from
$35.99
Designed to meet or exceed OE quality, premium-quality bearings from National are manufactured to exacting standards to deliver lasting performance and extended bearing life.
Product Features:
See More
Product Features:
- BUILT TO LAST: Advanced heat treatment process for strength
- PREMIUM MATERIALS: Precision manufactured using premium-grade steel for lasting performance and extended bearing life
- RELIABLE PERFORMANCE: Element size and quantity are engineered to meet or exceed the load rating of OE bearings
- COMPREHENSIVE COVERAGE: Industry-leading coverage for domestic and import applications
- RIGOROUS TESTING: Comprehensive testing throughout design and development processes by National engineers for quality you can count on
Yukon Gear – Replacement Inner Axle Seal For Dana 44 (Flanged Axle) (Part No.30303)
from
$7.99
Replacement inner axle seal for Dana 44 (flanged axle) .Yukon Mighty seal.
Product Features:
See More
Product Features:
- Inner axle seal
- Fits Dana Spicer 44 rear with flanged axle
Dorman – Drive Shaft: Greaseable (Part No.976-852)
from
$801.99
Upgrade and simplify your driveshaft replacement with a premium driveshaft that’s delivered fully assembled, dynamically pre-balanced and ready for a fast, hassle-free installation on specified vehicle makes, models and years. Engineered and manufactured in the USA, the driveshaft is manufactured from high-precision, drawn over mandrel (DOM) seamless steel tubing that offers superior concentricity, uniform wall thickness and greater torsional strength and dent resistance than standard welded steel. The assembly includes 100% new-not remanufactured-components, including yokes, CV joints and U-joints. A premium quality driveshaft assembly deserves premium packaging; this product ships in protective foam-in-place packaging to ensure it arrives in the same pristine, install-ready condition in which it left the manufacturing facility.
Product Features:
See More
Product Features:
- Ready to install – this premium driveshaft assembly arrives fully assembled, dynamically pre-balanced and ready for a fast, hassle-free installation on specified vehicle makes, models and years
- Premium shaft – made from drawn over mandrel (DOM) seamless steel tubing for superior concentricity, uniform wall thickness and more torsional strength and dent resistance than standard welded steel
- All-new construction – built in the USA with 100% new-not remanufactured-tubing, yokes, CV joints, and U-joints
- Superior packaging – assembly ships in protective foam-in-place packaging to ensure it is delivered in the same pristine, install-ready condition in which it left the manufacturing facility
Dorman – Drive Shaft: Greaseable (Part No.976-872)
from
$652.99
Upgrade and simplify your driveshaft replacement with a premium driveshaft that’s delivered fully assembled, dynamically pre-balanced and ready for a fast, hassle-free installation on specified vehicle makes, models and years. Engineered and manufactured in the USA, the driveshaft is manufactured from high-precision, drawn over mandrel (DOM) seamless steel tubing that offers superior concentricity, uniform wall thickness and greater torsional strength and dent resistance than standard welded steel. The assembly includes 100% new-not remanufactured-components, including yokes, CV joints and U-joints. A premium quality driveshaft assembly deserves premium packaging; this product ships in protective foam-in-place packaging to ensure it arrives in the same pristine, install-ready condition in which it left the manufacturing facility.
Product Features:
See More
Product Features:
- Ready to install – this premium driveshaft assembly arrives fully assembled, dynamically pre-balanced and ready for a fast, hassle-free installation on specified vehicle makes, models and years
- Premium shaft – made from drawn over mandrel (DOM) seamless steel tubing for superior concentricity, uniform wall thickness and more torsional strength and dent resistance than standard welded steel
- All-new construction – built in the USA with 100% new-not remanufactured-tubing, yokes, CV joints, and U-joints
- Superior packaging – assembly ships in protective foam-in-place packaging to ensure it is delivered in the same pristine, install-ready condition in which it left the manufacturing facility
Yukon Gear – Yoke for GM 8.5" with A 1310 U/Joint Size (Part No.41086)
from
$449.99
Yukon Gear and Axle manufactures a complete line of general replacement and performance series of pinion yokes for many street, racing, and heavy-duty off-road applications.
Product Features:
See More
Product Features:
- Fits GM 8.5″
- 30 spline
- 1310 u-joint size
- Outside snap ring design
- 3.219″ snap ring span
- 1.062″ cap diameter
- Strap style
Yukon Gear – Forged Yoke for GM 8.5" with A 1350 U/Joint Size. (Part No.41093)
from
$359.99
Yukon Gear and Axle manufactures a complete line of general replacement and performance series of pinion yokes for many street, racing, and heavy-duty off-road applications.
Product Features:
See More
Product Features:
- Fits GM 8.5″
- 30 spline
- 1350 u-joint size
- Outside snap ring design
- 3.625″ snap ring span
- 1.188″ cap diameter
- Forged steel
Yukon Gear – Cast Yoke for GM 12P and 12T with A 1350 U/Joint Size (Part No.41068)
from
$269.99
Yukon Gear and Axle manufactures a complete line of general replacement and performance series of pinion yokes for many street, racing, and heavy-duty off-road applications.
Product Features:
See More
Product Features:
- Fits GM 12 bolt passenger car and truck
- 30 spline
- 1350 u-joint size
- Outside snap ring design
- 3.625″ snap ring span
- 1.188″ cap diameter
- U-bolt style
Yukon Gear – Forged Yoke for GM 12P and 12T with A 1350 U/Joint Size (Part No.41069)
from
$209.99
Yukon Gear and Axle manufactures a complete line of general replacement and performance series of pinion yokes for many street, racing, and heavy-duty off-road applications.
Product Features:
See More
Product Features:
- Fits GM 12 bolt passenger car and truck
- 30 spline
- 1350 u-joint size
- 3.625″ snap ring span
- 1.188″ cap diameter
- Outside snap ring design
- U-bolt style
Schaeffler – DTC Cental Bearing, Propshaft (Part No.CH0169)
from
$179.99
Schaeffler hanger bearings are engineered and built to provide precise driveshaft alignment, support shafts and axles with the least possible friction and wear under the harshest conditions. This vital component also increases driveline integrity by absorbing and isolating vibration to protect the driveline and provide a smooth, comfortable ride.
Product Features:
See More
Product Features:
- High-precision and High-quality components used in all KITs
- Coverage of classic and new high-tech solutions for the best system coverage
Schaeffler – Bearing – CRB (Cylindrical Roller Bearing) (Part No.FC67148.5)
from
$9.99
We develop and produce high-quality roller bearings, spherical bearings, and plain bearings worldwide for a wide range of applications.
Product Features:
See More
Product Features:
- High-precision and High-quality components used in all KITs
- Coverage of classic and new high-tech solutions for the best system coverage
Top Picks for 1987 GMC R1500 Universal Joints
Upgrade GMC R1500s with top-quality Universal Joints parts, including 31 OEM and aftermarket selections for your 1987 model.
MOOG Driveline Products – Greaseable Premium Universal Joint (Part No.534G)
from
$42.99
Backed by superior materials and rigorous testing, MOOG Premium universal joints deliver reliable performance you can count on. MOOG problem-solving innovations ensure fast, hassle-free installation.
Product Features:
See More
Product Features:
- COMPREHENSIVE COVERAGE – Available for foreign and domestic nameplates
- GREASEABLE DESIGN – Greaseable u-joints allow for new grease to flush out contaminants and moisture
- KEEPS DIRT OUT – Nitrile rubber grease seals use a compressed double lip design for effective protection against contaminants
- RIGOROUS TESTING – Comprehensive testing throughout design and development processes by MOOG engineers for quality you can count on
- STRONG AND DURABLE – Bearing cups are cold-forged, case-hardened and precision ground while steel cross is forged and carburized heat treated for strength and durability
- Cross forging shape and flash provide easier installation and high strength
Driveworks – Universal Joint (Part No.DW-534G)
from
$15.99
Driveworks Universal Joints are designed to meet or exceed OE fit, form, and function. These universal joints are set to provide superior quality and easy installation. Driveworks Universal Joints are constructed from quality materials for extended durability. Driveworks Universal Joints are pre-lubricated with premium grease to provide a longer service life. The grease fittings are pre-installed to allow for easy maintenance (where applicable).
Product Features:
See More
Product Features:
- The cross is hot forged for the higher torque and horsepower
- The bearing cups are made by cold forging to provide higher strength and better rigidity
- Bearing cups allow 360 lubricant distribution to bearing surfaces, and are precision-ground for maximum load-carrying capabilities
- Lubrication grooves are designed to ensure grease penetration to entire journal and needle bearings
- Grease fitting allows for easy maintenance and the flexible use of the entire assembly
- Snap rings are held to strict tolerances to ensure proper cup position and retention
- Nitrile rubber seals are applied to optimize grease retention and reduce contamination
MOOG Driveline Products – Universal Joint Strap Kit (Part No.530-10)
from
$25.99
By constantly introducing design enhancements that extend product life and simplify installation and replacement, MOOG has earned its reputation as the chassis industry’s Problem Solver.
Product Features:
See More
Product Features:
- For U-Joints 355, 372 & 534G
- Contains two 1.81″ bolt center clamps and four 5/16-24 x 1-5/16″ cap screws
MOOG Driveline Products – Non-Greaseable Super Strength Universal Joint (Part No.234)
from
$29.49
Backed by superior materials and rigorous testing, MOOG Super Strength universal joints deliver reliable performance you can count on. MOOG problem-solving innovations ensure fast, hassle-free installation.
Product Features:
See More
Product Features:
- BUILT TO LAST – Rugged design specifically engineered for applications with higher torque and horsepower
- COMPREHENSIVE COVERAGE – Available for foreign and domestic nameplates
- CORROSION PROTECTION – Exclusive MICRO SHIELD coating protects against rust and corrosion
- KEEPS DIRT OUT – Abrasion-resistant nitrile seals provide ideal grease retention and protection from under-vehicle contaminants
- RIGOROUS TESTING – Comprehensive testing throughout design and development processes by MOOG engineers for quality you can count on
- STRONG AND DURABLE – Bearing cups are cold-forged, case-hardened and precision ground while steel cross is forged and carburized heat treated for strength and durability
Spicer – Universal Joint (Part No.5-795X)
from
$48.99
You expect a lot from your vehicle, and Spicer Life Series (SPL) universal joints deliver. SPL universal joints consistently outperform competitors, so you can hit the road or trail with confidence. Check out the difference that SPL universal joints can make in your vehicle, and make sure you are getting the longer life, increased bearing capacity and lower maintenance costs that Spicer Life Series (SPL) can provide.
See More
MOOG Driveline Products – Greaseable Super Strength Universal Joint (Part No.235)
from
$34.49
Backed by superior materials and rigorous testing, MOOG Super Strength universal joints deliver reliable performance you can count on. MOOG problem-solving innovations ensure fast, hassle-free installation.
Product Features:
See More
Product Features:
- BUILT TO LAST – Rugged design specifically engineered for applications with higher torque and horsepower
- COMPREHENSIVE COVERAGE – Available for foreign and domestic nameplates
- CORROSION PROTECTION – Exclusive MICRO SHIELD coating protects against rust and corrosion
- GREASEABLE DESIGN – Bearing cups feature a radial design to allow 360 Degrees lubricant distribution to all bearing surfaces
- KEEPS DIRT OUT – Abrasion-resistant nitrile seals provide ideal grease retention and protection from under-vehicle contaminants
- RIGOROUS TESTING – Comprehensive testing throughout design and development processes by MOOG engineers for quality you can count on
- STRONG AND DURABLE – Bearing cups are cold-forged, case-hardened and precision ground while steel cross is forged and carburized heat treated for strength and durability
Spicer – Universal Joint, Greaseable S44/3R Series (Part No.5-3147X)
from
$36.99
When you see the Spicer name, you know you are buying the highest quality product available. Spicer universal joints are no exception. Dana manufactures a full line of Spicer universal joints that are engineered to ensure longer life for vehicles in a wide variety of applications, from light vehicle to commercial and off-highway.
Product Features:
See More
Product Features:
- OE engineering and field tested experience is why the Spicer brand is the most trusted in the industry.
- Forged with high-quality steel, these u-joints are heat treated and case-hardened with precision to specific levels, ensuring optimal strength and durability.
- The process of precision grinding the seal and bearing surfaces helps to improve the life of the seal and bearing.
- Zerk allows for lubricating at regular intervals to help extend the life of the part.
Driveworks – Universal Joint (Part No.DW-235)
from
$15.99
Driveworks Universal Joints are designed to meet or exceed OE fit, form, and function. These universal joints are set to provide superior quality and easy installation. Driveworks Universal Joints are constructed from quality materials for extended durability. Driveworks Universal Joints are pre-lubricated with premium grease to provide a longer service life. The grease fittings are pre-installed to allow for easy maintenance (where applicable).
Product Features:
See More
Product Features:
- The cross is hot forged for the higher torque and horsepower
- The bearing cups are made by cold forging, having higher strength and better rigidity
- Bearig cups allow 360 lubricant distribution to bearing surfaces, and are precision-ground for maximum load-carrying capabilities
- Lubrication grooves designed to ensure grease penetration to entire journal and needle bearings
- Grease fitting in the cross allows for easy maintenance and the flexible use of the whole assembly
- Snap rings are held to strict tolerances to ensure proper cup position and retention
- Nitrile rubber seals to optimize grease retention and reduce contamination
Neapco – Universal Joint (Part No.2-3011)
Neapco – Universal Joint (Part No.2-0053)
Dorman – Help – U-Joint Repair Kit (Part No.81001)
from
$13.99
This universal joint strap kit is designed to match the original components required to repair and resecure universal joints on specified vehicles. Made of quality components, this kit is engineered for reliable performance and durability.
Product Features:
See More
Product Features:
- Direct replacement – this universal joint strap kit is designed to match the original components required to repair and resecure universal joints on specified vehicles
- Ideal solution – this kit is a reliable replacement for original components that are missing or have failed due to fatigue
- Durable construction – this kit is made from quality components to ensure reliable performance and a long service life
- Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience
Yukon Gear – 1310 U/Joint With Zerk Fitting On Cross (Part No.42008)
from
$44.99
Yukon 1310 U/Joint with zerk fitting on cross. 3.219″ snap ring span, 1.062″ cap diameter. Outside snap ring.
Product Features:
See More
Product Features:
- Cover gasket
- Fits 8.2″ in Buick, Oldsmobile and Pontiac
Yukon Gear – 1310 To 1330 Adapter U/Joint (Part No.42005)
from
$59.99
Yukon 1310 to 1330 adapter U/Joint. The 1310 side has a 3.219″ span and 1.062″ caps. The 1330 side has a 3.625″ span and 1.062″ caps. Both sides are outside snap ring.
Product Features:
See More
Product Features:
- Fits 1988-1998 F350
- 4340 Chromoly
- Left hand inner axle
- 35 spline
- 36.97″ from end of splines to center of u-joint bore
Yukon Gear – Dana 44, 8.2", 12P, 12T, Vet, And Model 20 U-Bolts (Part No.41198)
from
$34.99
1310 U-bolts, 5/16″ x 1-3/8″ Dana 30, Dana 44, 8.2″, 12P, 12T, VET, Model 20.
Product Features:
See More
Product Features:
- u-joint u-bolt kit
- Fits AMC Model 20, Dana Spicer 30 and 44, GM 8.2″, 12 bolt passenger car and truck and 1963-1979 Corvette
- 1310 u-joint size
- Includes two u-bolts and four nuts
Yukon Gear – 1350 To 1410 Conversion U/Joint (Part No.42006)
from
$78.99
Yukon 1350 to 1410 conversion u/joint.
Product Features:
See More
Product Features:
- Fits 2010 and down Chrysler 9.25″ rear
- 9.25″ ring gear diameter
- 29 spline pinion
- 12 ring gear bolts
- 4.11 ratio
Yukon Gear – 1350 Lifetime Series U/Joint (Part No.42021)
from
$63.99
Yukon 1350 Lifetime Series U/Joint. 3.625″ snap ring span, 1.188″ cap diameter. Outside snap ring.
Product Features:
See More
Product Features:
- Fits Dana Spicer 60
- 4340 Chromoly
- 30 spline
- Cut to length design fits 34″-36.5″ applications
- 8 x 3.96″ bolt pattern
Yukon Gear – 1330 Dual-Size Cap U/Joint (Part No.42017)
from
$61.99
Yukon 1330 Dual-size cap U/Joint. 3.625″ snap ring span. One set of caps is 1.125″ in diameter and the other is 1.062″. Outside snap ring.
Product Features:
See More
Product Features:
- 26 spline
- 34.6″ long
- Fits 2003-2006 Sprinter van
- Left hand side
Yukon Gear – Cast Yoke for GM 8.5" with A 1350 U/Joint Size. (Part No.41092)
from
$234.99
Yukon Gear and Axle manufactures a complete line of general replacement and performance series of pinion yokes for many street, racing, and heavy-duty off-road applications.
Product Features:
See More
Product Features:
- Fits GM 8.5″
- 30 spline
- 1350 u-joint size
- Outside snap ring design
- 3.625″ snap ring span
- 1.188″ cap diameter
- Strap style
Yukon Gear – Yoke for GM 12 Bolt Car & Truck, 1310 U/Joint Size, U-Bolt Design (Part No.41085)
from
$198.99
Yukon Gear and Axle manufactures a complete line of general replacement and performance series of pinion yokes for many street, racing, and heavy-duty off-road applications.
Product Features:
See More
Product Features:
- Fits GM 12 bolt passenger car and truck
- 30 spline
- 1310 u-joint size
- 3.219″ snap ring span
- 1.062″ cap diameter
- Outside snap ring design
- U-bolt style
Yukon Gear – 1350 U/Joint With Zerk Fitting (Part No.42010)
from
$51.99
Yukon 1350 U/Joint with zerk fitting. 3.625″ snap ring span, 1.118″ cap diameter. Outside snap ring.
Product Features:
See More
Product Features:
- Fits standard rotation Dana Spicer 44
- 8.50″ ring gear diameter
- 26 spline pinion
- 10 ring gear bolts
- 5.13 ratio
Yukon Gear – Mechanics 3R Lifetime Series U/Joint (Part No.42020)
from
$65.99
Yukon Mechanics 3R Lifetime Series U/Joint. 2.556″ span ring span, 1.125″ cap diameter. Inside snap ring.
Product Features:
See More
Product Features:
- Fits reverse rotation Dana Spicer 60
- 9.75″ ring gear diameter
- 29 spline pinion
- 12 ring gear bolts
- 4.88 ratio
- Thick gear for 4.11 and down carrier
Yukon Gear – 1330 Lifetime U/Joint (Part No.42004)
from
$53.99
1330 Yukon Lifetime U/Joint. 3.625″ snap ring span, 1.062″ cap diameter. Outside snap ring.
Product Features:
See More
Product Features:
- Fits Dana Spicer 70
- 10.50″ ring gear diameter
- 29 spline pinion
- 12 ring gear bolts
- 3.73 ratio
Yukon Gear – 1310, U/Jnt Straps & Bolts, 8.5" Front, 12P & 12T GM (Part No.41196)
from
$67.99
1310, U/Jnt straps & bolts, 8.5″ front, 12P & 12T GM.
Product Features:
See More
Product Features:
- u-joint strap kit
- Fits GM 12 bolt passenger car and truck and 8.5″ front
- 1310 u-joint size
- Includes two straps and four bolts
Yukon Gear – 7.5" And 8.5" GM Rear U/Joint Strap, Mech 3R (Part No.41201)
from
$23.99
7.5″ and 8.5″ GM rear U/joint strap, Mech 3R.
Product Features:
See More
Product Features:
- u-joint strap
- Fits GM 7.5″, 7.625″ and 8.5″
- Mechanics 3R u-joint size
- One single strap
In-Demand Transfer Cases for 1987 GMC R1500s
Select from 10 premium Transfer Cases parts for your 1987 GMC R1500, with prices ranging from $4.99 to $94.99.
National – Bearing Race (Part No.M802011)
from
$14.99
Manufactured with premium-grade steel, National taper bearing cups feature crowned raceways to ensure even load distribution.
Product Features:
See More
Product Features:
- PREMIUM MATERIALS – Precision manufactured using premium-grade steel for outstanding durability and performance
- SMOOTH ROTATION – Crowned raceways for even load distribution
- OE-STYLE DESIGN – Engineered to meet OE specifications
- COMPREHENSIVE COVERAGE – Industry-leading coverage for domestic and import applications
- RIGOROUS TESTING – Comprehensive testing throughout design and development processes by National engineers for quality you can count on
Dorman – Help – Auto Transmission Case Vent (Part No.14689)
from
$7.49
This transfer case vent is designed to match the fit and function of the original vent on specified vehicles, and is engineered for durability and reliable performance.
Product Features:
See More
Product Features:
- Direct replacement – this transfer case vent is designed to match the fit and function of the original vent on specified vehicles
- Restores functionality – reliable replacement for an original vent that has failed due to blockage or fatigue
- Durable construction – this part is made from quality materials to ensure reliable performance and long service life
- Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience
National – Shaft Repair Sleeve (Part No.99193)
from
$43.99
National has built a reputation as one of the most respected names in the industry. We have offered premium sealing solutions for more than 75 years. Our design team keeps pace with the industry and provides advanced solutions for today’s vehicles.
Product Features:
See More
Product Features:
- Designed to repair damaged, grooved or worn shafts
- Durable stainless steel construction for corrosion-free sealing surface that surpasses most original shaft specifications
- Ideal for a shaft where indications of seal wear, such as tracks or grooves have developed
- Ultra-thin construction (0.01/0.25mm wall thickness) allows original seal size to be used with minimal additional lip loading
- Easy to install with removable flange and installation tool
National – Multi Purpose Seal (Part No.7412S)
from
$4.99
National has built a reputation as one of the most respected names in the industry. We have offered premium sealing solutions for more than 75 years. Our design team keeps pace with the industry and provides advanced solutions for today’s vehicles.
Product Features:
See More
Product Features:
- Design type: spring loaded; single-lip
- Temperature range: -40 deg. F to 225 deg. F / -40 deg. C to 107 deg. C
- Good low temperature capability
- Low swell in hydrocarbon fluids
- Delivers quality and reliable performance for every type of repair
National – Bearing (Part No.LM67048)
from
$7.29
National Oil Seals & Bearings offer a full line of premium oil seals and bearings.
Product Features:
See More
Product Features:
- PREMIUM MATERIALS — Precision manufactured using premium-grade steel for outstanding durability and performance
- SMOOTH ROTATION — Crowned raceways and rollers for even load distribution
- OE-STYLE DESIGN — Engineered to meet OE specifications
- COMPREHENSIVE COVERAGE — Industry-leading coverage for domestic and import applications
- RIGOROUS TESTING — Comprehensive testing throughout design and development processes by National engineers for quality you can count on
National – Shaft Repair Sleeve (Part No.99125)
from
$30.49
National has built a reputation as one of the most respected names in the industry. We have offered premium sealing solutions for more than 75 years. Our design team keeps pace with the industry and provides advanced solutions for today’s vehicles.
Product Features:
See More
Product Features:
- Designed to repair damaged, grooved or worn shafts
- Durable stainless steel construction for corrosion-free sealing surface that surpasses most original shaft specifications
- Ideal for a shaft where indications of seal wear, such as tracks or grooves have developed
- Ultra-thin construction (0.01/0.25mm wall thickness) allows original seal size to be used with minimal additional lip loading
- Easy to install with removable flange and installation tool
National – Bearings (Part No.N-1211-L)
from
$94.99
Product Features:
See More
- BUILT TO LAST: Advanced heat treatment process for strength
- PREMIUM MATERIALS: Precision manufactured using premium-grade steel for lasting performance and extended bearing life
- RELIABLE PERFORMANCE: Element size and quantity are engineered to meet or exceed the load rating of OE bearings
- COMPREHENSIVE COVERAGE: Industry-leading coverage for domestic and import applications
- RIGOROUS TESTING: Comprehensive testing throughout design and development processes by National engineers for quality you can count on
Schaeffler – Cone (Part No.KM86649)
from
$16.99
With advanced load-carrying capacity and compact design, tapered roller bearings are used in wheel bearings, transmissions, differentials, transfer cases and other miscellanous applications. FAG manufacturers over 100 million tapered roller bearings annually.
Product Features:
See More
Product Features:
- High-precision and High-quality components used in all KITs
- Coverage of classic and new high-tech solutions for the best system coverage
Schaeffler – Cup (Part No.M802011)
from
$13.99
Our wheel seals are engineered using only the highest-quality materials to meet vehicle manufacturer specificatons. We work with suppliers to design seals that meet FAG’s quality standards. Seals are designed to protect wheel end components from contamination – such as dirt, dust, and moisture – and prevent the loss of grease over the life of the bearing. The specifications for wheel seals are very demanding, and the type required depends on the specific application, position and vehicle class.
Product Features:
See More
Product Features:
- High-precision and High-quality components used in all KITs
- Coverage of classic and new high-tech solutions for the best system coverage
Schaeffler – Cup (Part No.LM67010)
from
$5.99
With advanced load-carrying capacity and compact design, tapered roller bearings are used in wheel bearings, transmissions, differentials, transfer cases and other miscellanous applications. FAG manufacturers over 100 million tapered roller bearings annually.
Product Features:
See More
Product Features:
- High-precision and High-quality components used in all KITs
- Coverage of classic and new high-tech solutions for the best system coverage
Most Sold 1987 GMC R1500 Differentials
Explore our best-selling GMC parts for the 1987 R1500 among 219 OEM and aftermarket options starting from $2.59.
Valvoline – MaxLife Multi-Vehicle (ATF) Full Synthetic Automatic Transmission Fluid, 1 Quart (Part No.VV324)
from
$12.49
Valvoline Full Synthetic MaxLife Multi-Vehicle ATF, the No. 1 ATF product, suitable for use in 95% of vehicles. And now, it’s recommended for most belt & chain-driven continuously variable transmissions (CVT). Featuring advanced additives to prevent the major causes of transmission breakdown, it’s designed to help prevent leaks, reduce wear & tear, and maximize performance. Has improved thermal stability for longer fluid life, better viscosity stability for consistent transmission operation, and frictional enhancements for smooth gear engagements. Valv MaxLife Multi-Vehicle ATF is suitable for most Ford, GM, Toyota, Honda, Nissan, Hyundai, Subaru, BMW, Mercedes, Volvo, VW & Audi vehicles. Recommended for use in: GM DEXRON-II, DEXRON-III, DEXRON-VI, and DEX-CVT; Ford MERCON LV; Toyota/Lexus Type T, T-II, T-IV, WS, CVTF FE, and CVTF TC; Honda/Acura ATF-Z1 and Honda CVT; Nissan/Infiniti Matic-D, Matic-J, Matic-K and Matic-S; Hyundai/Kia SP-II, SP-III, SP-IV and SPH-IV; BMW 7045E, ETL 8072B, LA2634 and LT71141; Allison C-4; Mercedes-Benz NAG-1; Volvo 1161521, 1161540, 97340 and 1273.41; Subaru ATF HP, Lineartronic chain CVT and CVT-II, Lineartronic High Torque CVT, and CV-30; and VW/Audi G-052-025-A2 and G-052-162-A1. CURRENTLY UNABLE TO SHIP THIS PRODUCT TO CUSTOMERS LOCATED IN CALIFORNIA
Product Features:
See More
Product Features:
- FOR USE IN 95% OF VEHICLES INCLUDING MOST CVTs in operation with US registered light duty applications
- HIGH PERFORMANCE CONDITIONING AGENTS prolong seal elasticity to prevent leaks
- IMPROVED DURABILITY & TRANSMISSION LIFE with anti-wear technology to avoid costly repairs
- ENHANCED HIGH & LOW TEMP PERFORMANCE supports transmission fluid in all weather situations
National – Multi-Purpose Bearing (Part No.A-6)
from
$16.99
National Oil Seals & Bearings offer a full line of premium oil seals and bearings.
Product Features:
See More
Product Features:
- CONSISTENT PERFORMANCE — Matched cup and cone components ensure consistent performance
- PREMIUM MATERIALS — Precision manufactured using premium-grade steel for outstanding durability and performance
- SMOOTH ROTATION — Crowned raceways and rollers for even load distribution
- OE-STYLE DESIGN — Engineered to meet OE specifications
- COMPREHENSIVE COVERAGE — Industry-leading coverage for domestic and import applications
- RIGOROUS TESTING — Comprehensive testing throughout design and development processes by National engineers for quality you can count on
National – Bearing Race (Part No.LM501314)
from
$11.99
Manufactured with premium-grade steel, National taper bearing cups feature crowned raceways to ensure even load distribution.
Product Features:
See More
Product Features:
- PREMIUM MATERIALS – Precision manufactured using premium-grade steel for outstanding durability and performance
- SMOOTH ROTATION – Crowned raceways for even load distribution
- OE-STYLE DESIGN – Engineered to meet OE specifications
- COMPREHENSIVE COVERAGE – Industry-leading coverage for domestic and import applications
- RIGOROUS TESTING – Comprehensive testing throughout design and development processes by National engineers for quality you can count on
Motive Gear – Differential Pinion Shim Kit (Part No.1100)
from
$7.99
High-quality Differential Component Shim
Product Features:
See More
Product Features:
- SHIM KIT FITS-8.25-F7.5-AMC20-GM0
Motive Gear – Differential Internal Carrier Gear Kit (Part No.GM10BI-30)
Motive Gear – Differential Ring and Pinion (Part No.GM10-342A)
Felpro – Axle Housing Cover Gasket Oval Shaped 10 Bolt Hole Gasket (Part No.RDS 55028-1)
from
$10.99
Fel-Pro® gaskets are specifically designed for the repair environment to deliver a reliable seal on even the most troublesome applications. Designed for imperfect sealing surfaces and manufactured with proprietary materials, you can count on Fel-Pro for innovative sealing solutions for the real-world repair environment.
Product Features:
See More
Product Features:
- Meets or exceeds all original equipment specifications
- Application specific design to ensure a perfect fit
- Unsurpassed quality you can trust
- Validated for fit, form and function
- Each Fel-Pro gasket, no matter how small, is engineered to exacting standards with proprietary design, engineering and manufacturing processes
Motive Gear – Differential Ring and Pinion (Part No.GM10-373A)
National – Tapered Roller Bearing Cone (Part No.M802048)
from
$25.99
Manufactured with premium-grade steel, National taper bearing cones feature crowned raceways and rollers to ensure even load distribution.
Product Features:
See More
Product Features:
- PREMIUM MATERIALS – Precision manufactured using premium-grade steel for outstanding durability and performance
- SMOOTH ROTATION – Crowned raceways and rollers for even load distribution
- OE-STYLE DESIGN – Engineered to meet OE specifications
- COMPREHENSIVE COVERAGE – Industry-leading coverage for domestic and import applications
- RIGOROUS TESTING – Comprehensive testing throughout design and development processes by National engineers for quality you can count on
Dorman – Help – Differential Shaft Lock Bolt (Part No.81048)
from
$6.79
This differential pinion shaft lock bolt is designed to match the fit and function of the original part on specified vehicles. Made of quality materials, it is engineered for reliable performance.
Product Features:
See More
Product Features:
- Direct replacement – this differential pinion shaft lock bolt matches the fit and function of the factory part on specified years, makes and models
- Ideal solution – this bolt is a reliable replacement for an original part that is missing or has failed due to fatigue
- Durable construction – this part is made from quality materials to ensure reliable performance and long service life
- Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience
Dorman – Differential Yoke including Seal and Pinion Nut (Part No.697-500)
from
$154.99
Worn or damaged differential end yoke causing driveline vibrations- This direct replacement end yoke matches the original equipment part for a trustworthy repair and reliable performance.
Product Features:
See More
Product Features:
- Direct replacement – this differential end yoke matches the fit and construction of the original yoke
- Excellent value – this replacement end yoke offers original equipment quality at a fraction of the price of dealer parts
- Quality materials – this end yoke is machined from cast iron for strength and is precision machined for reliability
- Validated fit – this differential end yoke has been tested to confirm accurate fit
Dorman – Differential Cover (Part No.697-700)
from
$37.99
This direct replacement differential cover matches the fit and function of the original equipment diff cover for a reliable, leak-free repair. It features a durable design, made to strict specifications, to help ensure reliable service life.
Product Features:
See More
Product Features:
- Direct replacement – this differential cover matches the fit and function of the original equipment diff cover on select vehicles
- Reliable repair – the smart solution for fixing an existing cover that’s rusted, damaged or leaking differential fluid
- Durable construction – this differential cover is made according to strict engineering standards to help ensure dependability
- Trustworthy quality – backed by a team of product experts in the United States and more than a century of automotive experience
Motive Gear – Differential Ring and Pinion (Part No.GM10-373)
Motive Gear – Differential Master Bearing Kit – Timken (Part No.R10RMKT)
from
$135.99
Motive Gear Differential Bearing Kits Include Front & Rear Pinion Bearing, Pinion Seal, Carrier Bearings, Pilot Bearing Where Applicable, Gear Marking Compound, Crush Sleeve, Pinion Nut, Brush, Thread Locking Compound And Cover Gasket Or Rtv
Product Features:
See More
Product Features:
- KIT BRG & SEAL GM 10 BOLT MASTER NON IFS FRONT / REAR
Motive Gear – Differential Master Bearing Kit – Koyo (Part No.R10REMK)
from
$113.99
Motive Gear Differential Bearing Kits Include Front & Rear Pinion Bearing, Pinion Seal, Carrier Bearings, Pilot Bearing Where Applicable, Gear Marking Compound, Crush Sleeve, Pinion Nut, Brush, Thread Locking Compound And Cover Gasket Or Rtv
Product Features:
See More
Product Features:
- GM 10 BOLT 8.5″ MSTR KIT W/EATON OR AUBURN PRO
National – Tapered Roller Bearing Cone (Part No.LM501349)
from
$21.99
Manufactured with premium-grade steel, National taper bearing cones feature crowned raceways and rollers to ensure even load distribution.
Product Features:
See More
Product Features:
- PREMIUM MATERIALS – Precision manufactured using premium-grade steel for outstanding durability and performance
- SMOOTH ROTATION – Crowned raceways and rollers for even load distribution
- OE-STYLE DESIGN – Engineered to meet OE specifications
- COMPREHENSIVE COVERAGE – Industry-leading coverage for domestic and import applications
- RIGOROUS TESTING – Comprehensive testing throughout design and development processes by National engineers for quality you can count on
Motive Gear – Differential Carrier Shim Kit (Part No.1101)
from
$8.99
High-quality Differential Carrier Shim Kit
Product Features:
See More
Product Features:
- CARRIER SHIMS 12 BOLT GM CAR & TRUCK ALSO GM8.6″ 99-ON
Yukon Gear – 3 Qt – 80W90 Conventional Gear Oil with Posi Additive (Part No.15003)
from
$57.99
Union 76 gear oil is a conventional non-synthetic 80W90 formulation designed for all types of differentials. This kit includes three quarts of oil and a bottle of Yukon Limited Slip Friction modifier that reduces noise and chatter in clutch driven positraction units and limited slip differentials.
Product Features:
See More
Product Features:
- Includes three quarts of conventional oil and one 4oz bottle of Yukon positraction additive
Yukon Gear – 3 Qt – Penzoil 80W90 Conventional Gear Oil (Part No.15002)
from
$44.99
Union 76 gear oil is a conventional non-synthetic 80W90 formulation designed for all types of differentials.
Product Features:
See More
Product Features:
- Includes three quarts of conventional oil
Motive Gear – Ring Gear Bolt (Part No.14066913)
Yukon Gear – Ring Gear Bolt (Part No.33049)
from
$6.99
Ring gear bolt for GM 7.5″, 7.6″, 7.6″ IRS, 8.0″, 8.25″ IFS, 8.5″, 8.6″ & 8.6″ IRS. 7/16″ x 20.
Product Features:
See More
Product Features:
- Ring gear bolt for GM 7.5″, 7.625″, 7.6″ IRS, 8.0″, 8.25″ IFS, 8.5″, 8.6″ and 8.6″ IRS
- 7/16″ x 20
Yukon Gear – Dana 25, 27, 30, 44, Model 20 And Model 35, GM 7.5", 8.2", 8.5", 12P, 12T, C9.25 Rear Cover Bolt (Part No.33286)
from
$9.99
5/16″-18 cover bolt, Dana Spicer 25, 27, 30 and 44, AMC Model 20 and Model 35, Chrysler 9.25 rear, GM 7.5″, 7.625″, 8.2″, 8.5″, 12 bolt passenger car and truck.
Product Features:
See More
Product Features:
- Cover bolt for Dana Spicer 25, 27, 30 and 44, AMC Model 20 and Model 35, GM 7.5″, 7.625″, 8.2″, 8.5″ and 12 bolt passenger car and truck.
- 1/2″ head
Dorman – Help – Pinion Crush Sleeves (Part No.81057)
from
$5.99
This differential crush sleeve is designed to match the fit and function of the original sleeve on specified vehicles, and is engineered for durability and reliable performance.
Product Features:
See More
Product Features:
- Direct replacement – this differential crush sleeve is designed to match the fit and function of the original sleeve on specified vehicles
- Required replacement – when servicing the differential
- Durable construction – this part is made from quality materials to ensure reliable performance and long service life
- Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience
Driveworks – Tapered Roller Bearing (Part No.S-M-802048)
Top-Rated Drivetrains Brands For Your 1987 GMC R1500
Shop for the best-rated brands offering Drivetrains and other products for your 1987 GMC R1500s. Below you’ll find some of our best rated Drivetrains from National, Dorman, and Motive Gear, and more. Drivetrains from these brands that fit a 1987 R1500 start at just $6.79 and are rated as high as 4.3 stars. OEM and aftermarket Drivetrains don’t get more top quality, durable, and affordable than from the brands below.
Popular National 1987 GMC R1500 Drivetrains
When it comes to maintaining or upgrading your 1987 GMC R1500, using quality Drivetrains is essential to ensure durability and a perfect fit. National ticks all of those boxes. We offer a wide selection of National Drivetrains, specifically designed for the 1987 GMC R1500. With over 3 National brand Drivetrains in stock, you’re sure to find what you need. The prices for these top-notch parts start as low as $14.99, with an average price of just $15.99. Plus, with over 37 customer reviews and an average rating of 4.3 stars, you can trust that our National Drivetrains will get the job done right. Choose Advance Auto Parts for reliability, quality, and expert-approved parts that keep your vehicle running strong.
Popular Dorman 1987 GMC R1500 Drivetrains
Dorman auto parts is one of the highest quality Drivetrain brands in the market. Any 1987 GMC R1500 owner should feel confident when installing genuine Dorman parts in their vehicle. To ensure the best fit and performance for your 1987 R1500, Advance Auto Parts carries a full inventory of 3 Dorman Drivetrains. Plus you will be keeping your GMC in peak condition while saving money because prices on these Dorman Drivetrains range from $6.79 to $7.49, plus, with more than 18 customer reviews and an impressive 4.2 stars average rating, you can be confident the Fram Drivetrains below will deliver on both quality and value.
from
$6.99
(3)
Axle Shaft Lock Assortment
“Lucky for me they had it in stock. Parts man was excellent”
from
$7.49
(4)
Auto Transmission Case Vent
“Works for multiple vent areas of any vehicle, I got it for my gas tank fume vents!”
FAQs for 1987 GMC R1500 Drivetrains
Which Drivetrains are best-sellers for 1987 GMC R1500s?
Out of 286 Drivetrains that fit 1987 GMC R1500s, the following parts are the top sellers:
- Axle Housing Cover Gasket Oval Shaped 10 Bolt Hole Gasket (5185823) – $10.99
- Greaseable Premium Universal Joint (10086738) – $42.99
- Universal Joint (10265505) – $15.99
What’s the price range for 1987 GMC R1500 Drivetrains?
Drivetrain prices for the 1987 GMC R1500 start at $2.59 and go up to $1,969.99 for the most premium parts.
What’s the average price of a Drivetrain for a 1987 GMC R1500?
The average price for Drivetrains for the 1987 GMC R1500 is $190.92. Keep in mind the variety of part types within our Drivetrain category so you are likely to find a wide range of prices across a variety of parts and components.
What are the cheapest Drivetrains for my 1987 GMC R1500?
The cheapest 1987 GMC R1500 Drivetrains we carry in stock are:
- Differential Pinion Gear Washer (10282533) – $2.59
- Ring Gear Bolt (20520168) – $2.99
- Differential Ring Gear Bolt (10282159) – $2.99
- Differential Cross Shaft (10282201) – $2.99
- Differential Crush Sleeve (10282146) – $2.99
What are the top-rated Drivetrains that fit the 1987 GMC R1500?
Out of 4,432 reviews by customers, our 1987 GMC R1500 Drivetrains have an average customer rating of . These are some of the highest-rated Drivetrain types for the 1987 GMC R1500 and their top-rated products:
- Universal Joints
- Universal Joint Strap Kit (10086946) – $25.99
- Greaseable Premium Universal Joint (10086738) – $42.99
- Universal Joint (10265505) – $15.99
What types of Drivetrains do you sell for my 1987 GMC R1500?
As of 6/2/26, these are some of the most in-demand types of Drivetrains for a 1987 GMC R1500:
Can I get help with 1987 GMC R1500 Drivetrain orders?
Contact our customer support team, by chat or phone, through the help desk page, where you can find instant answers about GMC Drivetrains and more.
What is your return policy for GMC R1500 Drivetrains?
Advance Auto Parts keeps returns simple. For new GMC R1500 Drivetrains and accessories, your online orders can be returned, in their original condition, within 45 days. For requirements, see the returns page.
