1987 Ford Ranger Drive Shafts and Axles

More 1987 Ford Ranger Drive Shafts and Axles

Find your specific 1987 Ford Ranger original or aftermarket Drive Shafts and Axles below. Order your parts online and have delivered to your home or pick up in-store at Advance Auto.

Essential 1987 Ford Ranger Drive Shafts and Axles

Anchor – Center Support Bearing Motor Mount: Center, 1 Piece (Part No.6061)

Center Support Bearing Motor Mount: Center, 1 Piece

from

$14.79
Center support bearings or Carrier Support Bearings are used when the driveshaft is split into two sections. It serves as a junction on the drive shaft between the transmission and the differential allowing the driveshaft to flex, relieving stress on other drive line components. Each part is engineered and designed to OE Standards. Applicable to FORD 84-98;. Please verify your application.

Product Features:
  • MAXIMUM VIBRATION DAMPENING: Rubber cushion is made of high grade rubber that ensures maximum dampening of vibration and the ability to absorb over loads.
  • HEAVY GAUGE STEEL FRAME: The housing frame is made from heavy gauge steel with durability that extends the service life.
  • READY TO INSTALL: Most center supports include a sealed bearing and dust shield and are ready to install.
  • For Years: 1984-1998
  • Weight approx: 2 Lbs
  • BEARING ID / BORE: 1.2570 INCH / 32 MM
  • CENTERLINE: 2.00 INCH / 51 MM
  • MOUNT WIDTH: 5.90 INCH / 150 MM
See More

(1 reviews)
View Product

Dorman – U-BOLT KIT (Part No.929-761)

U-BOLT KIT

from

$26.99
The components in this leaf spring axle U-bolt kit are designed to securely hold the leaf spring or leaf spring bundle to the underside of an axle of a vehicle or trailer. Check the leaf spring dimensions and other relevant application details to select the right type and size U-bolt kit for your needs..

Product Features:
  • Reliable hardware – the components in this leaf spring axle U-bolt kit are designed to securely hold the leaf spring or leaf spring bundle to the underside of a vehicle or trailer axle.
  • Check fit – carefully review the dimensions of the leaf springs that will be used and other relevant application details to select the right type and size U-bolt kit for your needs
  • Durable construction – the components in this kit are engineered from quality materials for reliable performance and long service life
  • Trustworthy quality – backed by a team of product experts in the United States and more than a century of automotive experience
See More
View Product

National – Shaft Repair Sleeve (Part No.99106)

Shaft Repair Sleeve

from

$33.99
National® has built a reputation as one of the most respected names in the industry. We have offered premium sealing solutions for more than 75 years. Our design team keeps pace with the industry and provides advanced solutions for today’s vehicles.

Product Features:
  • Designed to repair damaged, grooved or worn shafts
  • Durable stainless steel construction for corrosion-free sealing surface that surpasses most original shaft specifications
  • Ideal for a shaft where indications of seal wear, such as tracks or grooves have developed
  • Ultra-thin construction (0.01/0.25mm wall thickness) allows original seal size to be used with minimal additional lip loading
  • Easy to install with removable flange and installation tool
  • Installation tool reduces sleeve distortion and allows for installation without removal from the shaft
See More

(1 reviews)
View Product

Yukon Gear – The Carrier Bearing Puller (Part No.56072)

The Carrier Bearing Puller

from

$883.99
The Yukon carrier bearing Puller works with an impact gun to quickly and safely remove carrier bearings without damaging them. This unit comes with a handy bench top stand and works with up to one ton applications including Dana 70HD, Dana 80, 10.25″ & 10.5″ Ford, or GM & Chrysler 11.5″ differentials.

Product Features:
  • Carrier bearing puller
  • Works with an impact gun to safely and easliy remove carrrier bearings
See More
View Product

Spicer – SPICER U-JOINT (Part No.5-1310-1X)

SPICER U-JOINT

from

$44.99
SPICER U-JOINT
View Product

Spicer – Axle Shft Univ Joint (Part No.5-3226X)

Axle Shft Univ Joint

from

$47.99
Axle Shft Univ Joint
View Product

Yukon Gear – Ford 7.5" C/Clip, Tracloc & Standard Open (Part No.33080)

Ford 7.5" C/Clip, Tracloc & Standard Open

from

$8.99
Ford 7.5″ C/clip, TracLoc & standard Open.

Product Features:
  • c-clip for Ford 7.5″
  • Fits standard open and Trac Loc applications
  • Not compatible with Auburn Gear positraction
See More
View Product

Yukon Gear – C/Clip (Part No.33083)

C/Clip

from

$8.99
C/Clip for Chrysler 8.25″, Ford 7.5″, 8.8″, GM 12 bolt car & truck, 8.2″, 8.5″ & 8.6″.

Product Features:
  • c-clip for Chrysler 8.25″, Ford 8.8″, GM 12 bolt car and truck and GM 8.2″, 8.5″ and 8.6″
  • .150″ thick
See More
View Product

National – Bearings (Part No.M802011)

Bearings

from

$14.79
National Oil Seals & Bearings offer a full line of premium oil seals and bearings.

Product Features:
  • Premium bearing design matches OEM specifications
  • Precision manufactured using premium-grade steel for outstanding durability and performance
  • Crowned raceways and rollers to ensure even load distribution for maximum life
  • Industry leading coverage
  • Professional technicians know they can depend on National
See More

(3 reviews)
View Product

National – Bearings (Part No.HM88610)

Bearings

from

$15.49
National Oil Seals & Bearings offer a full line of premium oil seals and bearings.

Product Features:
  • Premium bearing design matches OEM specifications
  • Precision manufactured using premium-grade steel for outstanding durability and performance
  • Crowned raceways and rollers to ensure even load distribution for maximum life
  • Industry leading coverage
  • Professional technicians know they can depend on National
See More
View Product

Yukon Gear – Ford 7.5", 8", 8.8", & 9" Axle Stud (Part No.33175)

Ford 7.5", 8", 8.8", & 9" Axle Stud

from

$6.99
Ford 7.5″, 8″, 8.8″, & 9″ axle stud.

Product Features:
  • Axle stud for Ford 7.5″, 8.8″ and 9″
  • 1/2″ x 20 thread
  • 1 7/8″ long
  • 29/64″ shoulder length
See More
View Product

Yukon Gear – Axle Stud , 58Mm X M14-2.0 (Part No.33557)

Axle Stud , 58Mm X M14-2.0

from

$5.99
AXLE STUD , 58MM X M14-2.0 .
See More
View Product

Driveworks – Axle Repair Bearing (Part No.S-RP-5707)

Axle Repair Bearing

from

$16.49
Value-priced bearing meets all cataloged application requirements.

Product Features:
  • Brand may vary by location
See More

(19 reviews)
View Product

National – Bearings (Part No.A-5)

Bearings

from

$16.99
National Oil Seals & Bearings offer a full line of premium oil seals and bearings.

Product Features:
  • Premium bearing design matches OEM specifications
  • Precision manufactured using premium-grade steel for outstanding durability and performance
  • Crowned raceways and rollers to ensure even load distribution for maximum life
  • Industry leading coverage
  • Professional technicians know they can depend on National
See More

(39 reviews)
View Product

National – Multi Purpose Bearing (Part No.HBD-206-FF)

Multi Purpose Bearing

from

$76.99
National Oil Seals & Bearings offer a full line of premium oil seals and bearings.

Product Features:
  • Premium bearing design matches OEM specifications
  • Precision manufactured using premium-grade steel for outstanding durability and performance
  • Controlled heat treating process for lasting performance and extended bearing life
  • Industry leading coverage
  • Professional technicians know they can depend on National
See More
View Product

Driveworks – Drive Shaft Center Support (Part No.S-HBD-206-FF)

Drive Shaft Center Support

from

$32.99
Product Features:
  • Brand may vary by location
See More
View Product

Dorman – Rear Drive Shaft: Greaseable, Adjustable (Part No.976-200)

Rear Drive Shaft: Greaseable, Adjustable

from

$714.99
Replacing a drive shaft doesn’t have to be complicated. This complete drive shaft assembly is pre-balanced and ready to install with 100% new yokes, tubes, constant velocity (CV) joints and universal joints.

Product Features:
  • Direct replacement – this drive shaft is made to the original equipment dimensions for dependable fit and performance
  • 100% new – this drive shaft is made from all new components so there’s no core charge or return hassle
  • Ready to install – this drive shaft arrives pre-balanced to make installation quick and simple
  • Serviceable construction – non-staked universal joints are designed for future serviceability
See More
View Product

Dorman – Rear Drive Shaft: Adjustable (Part No.946-759)

Rear Drive Shaft: Adjustable

from

$621.99
Replacing a drive shaft doesn’t have to be complicated. This complete drive shaft assembly is pre-balanced and ready to install with 100% new yokes, tubes, constant velocity (CV) joints and universal joints.

Product Features:
  • Direct replacement – this drive shaft is made to the original equipment dimensions for dependable fit and performance
  • 100% new – this drive shaft is made from all new components so there’s no core charge or return hassle
  • Ready to install – this drive shaft arrives pre-balanced to make installation quick and simple
  • Serviceable construction – non-staked universal joints are designed for future serviceability
See More
View Product

Driveworks – Axle Shaft Seal (Part No.S-470672)

Axle Shaft Seal

from

$7.99
Product Features:
  • Brand may vary by location
See More
View Product

Driveworks – Oil Seal (Part No.S-8660S)

Oil Seal

from

$5.49
Value-priced seal meets all cataloged application requirements.

Product Features:
  • Brand may vary by location
See More

(38 reviews)
View Product

Yukon Gear – Dana 28 (93^) & Model 35 Outer Axle/Hub Snap Ring (Part No.33269)

Dana 28 (93^) & Model 35 Outer Axle/Hub Snap Ring

from

$4.99
Dana 28 (93^) & Model 35 outer axle/hub snap ring.

Product Features:
  • Outer axle snap ring for AMC Model 35 IFS and 1993 and up Dana Spicer 28
See More
View Product

Dorman – Help – Driveshaft Flange Bolts (Part No.80992)

Driveshaft Flange Bolts

from

$20.29
This drive shaft bolt is designed to match the fit and function of the original part on specified vehicles. Made of quality materials, it is engineered for reliable performance.

Product Features:
  • Direct replacement – this engine mount bolt matches the fit and function of the factory part on specified years, makes and models
  • Ideal solution – this drive shaft bolt is a reliable replacement for an original part that is missing or has failed due to fatigue
  • Durable construction – this part is made from quality materials to ensure reliable performance and long service life
  • Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience
See More

(1 reviews)
View Product

Yukon Gear – R1563Tav Rear Axle Bearing And Seal Kit (Part No.10004)

R1563Tav Rear Axle Bearing And Seal Kit

from

$42.99
Yukon axle bearing & seal kits are specially designed for each application & use all high quality bearings & seals. R1563TAV axle bearing and seal kit, TorringtonBrand, 2.250″ OD, 1.400″ ID. This axle bearing & seal kit services one side only.

Product Features:
  • Includes axle bearing and seal
  • Services one side
  • Torrington Brand
  • 2.250″ O.D.
  • 1.400″ I.D.
See More
View Product

Yukon Gear – R1559Tv Rear Axle Bearing And Seal Kit (Part No.10001)

R1559Tv Rear Axle Bearing And Seal Kit

from

$52.99
Yukon axle bearing & seal kits are specially designed for each application & use all high quality bearings & seals. R1559TV axle bearing and seal kit, TorringtonBrand, 2.530″ OD, 1.620″ ID This axle bearing & seal kit services one side only.

Product Features:
  • Includes axle bearing and seal
  • Services one side
  • Torrington Brand
  • 2.530″ O.D.
  • 1.620″ I.D.
See More
View Product

EMPI/Empire – Axle Nut (Part No.K4030200229EMP)

Axle Nut

from

$6.95
Axle Nut
View Product

1987 Ford Ranger Drive Shafts and Axles

Maybe you’re in the middle of a full rebuild of that 1987 Ford Ranger. Maybe you just need a couple of Drive Shafts and Axles. Either way, Advance Auto Parts has 38 different Drive Shafts and Axles in our inventory ranging from $1.99 to $1,109.99. That means you can find the exact parts or products you need to keep that 1987 Ford Ranger running smoothly.

Drive Shafts and Axles are only as good as their brand. We stock 9 different brands to make sure you have plenty of trusted parts to choose from for your 1987 Ford Ranger. Driveworks, National, and Spicer are just some of the brands we stock. Search for brands you know or compare prices and reviews to help you decide!

We know you’ll find the perfect Drive Shafts and Axles for your 1987 Ford Ranger, but don’t take our word for it – read our customer ratings and reviews and buy with confidence. Out of the 707 reviews in this category, some of the top rated parts include Bearings with 5.0 stars and Multi Purpose Seal with 5.0 stars.

So if you’re in the market for aftermarket Drive Shafts and Axles to keep your 1987 Ford Ranger rolling for years to come, look no further. Shop online and have your products shipped direct to your door, or pick up at the nearest Advance Auto Parts location today!

Drive Shafts and Axles Brands To Make Your 1987 Ford Ranger Last

Simple repair, complete replacement, or a full rebuild. No matter the job, your 1987 Ford Ranger demands trusted brand parts and products to keep it running. Many trusted brands of Drive Shafts and Axles make up Advance Auto Parts’ inventory, and all are ready to help make your Ranger the best it can be. Be sure to browse some of our top Drive Shafts and Axles brands and parts.

Popular Dorman – Help Drive Shafts and Axles

We carry Dorman – Help parts in our stock across Drive Shaft Support Bolts categories, plus more. For a 1987 Ford Ranger, our most popular Dorman – Help Drive Shafts and Axles include:
Driveshaft Flange Bolts
from $20.29
(1)
Driveshaft Flange Bolts
Drive Shaft Support Bolts

Top 1987 Ford Ranger Drive Shafts and Axles from Driveworks

Driveworks products are another trusted brand when it comes to Drive Shafts and Axles for your 1987 Ford Ranger. Popular Driveworks parts include:
Oil Seal
from $5.49
(38)
Oil Seal
Axle Shaft Seals
Axle Repair Bearing
from $16.49
(19)
Axle Repair Bearing
Axle Shaft Bearings
Oil Seal
from $4.99
(7)
Oil Seal
Axle Shaft Seals

FAQs for 1987 Ford Ranger Drive Shafts and Axles

What are the most purchased Drive Shafts and Axles for the 1987 Ford Ranger?

Out of 38 Drive Shafts and Axles for the 1987 Ford Ranger, the most popular in our inventory are:
Universal Joint
from $28.99
(12)
Universal Joint
Axle Shaft Universal Joints
Multi Purpose Seal
from $8.99
(19)
Multi Purpose Seal
Axle Shaft Seals
Multi Purpose Seal
from $8.99
(16)
Multi Purpose Seal
Axle Shaft Seals

What are the top-rated 1987 Ford Ranger Drive Shafts and Axles?

Top-rated Drive Shafts and Axles for your 1987 Ford Ranger based on customer reviews/ratings are:
Bearings
from $14.79
(3)
Bearings
“good product,”
Multi Purpose Seal
from $21.29
(1)
Multi Purpose Seal
“advance has the two front axle seal backwards of each other. S-3543 is the right side and 710065 is the left side.”
Shaft Repair Sleeve
from $33.99
(1)
Shaft Repair Sleeve
“Product was in stock didn’t leak and worked the first time”

More Popular Parts for All Makes