1987 Ford E-150 Econoline Drivetrains
Find Your Specific 1987 Ford E-150 Econoline Drivetrains
Below you will find various in-demand Ford Drivetrains, components and accessories for your 1987 E-150 Econoline. Advance Auto Parts has popular E-150 Econoline parts like Differentials, Drive Shafts and Axles, Spindles and more. You’ll also find aftermarket and OEM Drivetrains for other E-150 Econoline model years including
1995,
1996,
1997,
1998,
1999,
2000,
2001,
2002,
2006 and more. Select a category of 1987 Ford E-150 Econoline Drivetrains below and start saving instantly.
Popular 1987 Ford E-150 Econoline Drivetrains Categories
Essential Drivetrains for 1987 Ford E-150 Econolines
Yukon Gear – Dura Grip For Dana 44, 30 Spline, 3.92 & Up (Part No.26027)
from
$809.99
The Yukon Dura Grip provides aggressive yet smooth traction to give you the confidence & performance you need. Get longer life and better traction with the heavy duty Yukon Dura Grip Positraction. The Yukon Dura Grip uses a nodular case and forged 4320 internals for added strength along with composite clutches for high performance and long life. All units are Rebuildable and many offer upgrades to increase aggressiveness for racing applications. Each unit carries a one year warranty against defects.
Product Features:
See More
Product Features:
- Fits Dana Spicer 44 with 30 spline axles
- 3.92 ratio and up only
- 4-spring, clutch style positraction
- Internal gears are manufactured using forged 4320 steel and cut to provide stronger teeth
- Fully rebuildable
- Assembled in the USA
Yukon Gear – One (1) Specialty Bearing Race To Adapt Small Bearing Journal Into A 3.250" Dropout (Part No.32157)
from
$51.99
One (1) specialty bearing race to adapt small bearing journal into a 3.250″ dropout. This adapter allows the use of a 28 or 31 spline carrier, positraction or locker in a 3.250″ dropout. This is a perfect solution if you are currently running 28 or 31 spline axles but are looking to upgrade to 35 spline later, or are stepping down from 35 spline but don’t want to buy a new dropout.
Product Features:
See More
Product Features:
- Carrier race
- Fits Ford 9″
- Conversion race to install small bearing carrier into 3.250″ dropout
Yukon Gear – Positraction Internals For Dana 44 Dura Grip Posi, 30 Spline (Part No.16168)
from
$399.99
Yukon positraction internals for Dana 44 Dura Grip posi, 30 spline. Does not include clutches. Does NOT fit Trac Loc or Powr Lok. Fits Dura Grip ONLY.
Product Features:
See More
Product Features:
- Spider gear kit
- Fits Dana Spicer 44 with Dura Grip positraction
- Includes two side gears, four pinion gears, cross pin shaft, roll pin and spider gear thrust washers.
Motive Gear – Differential Ring and Pinion (Part No.D44-538)
Powertrax – Grip PRO Traction System (Part No.GT109028)
from
$496.99
For vehicles that are driven daily, the Powertrax No-Slip Traction System is the latest design in quiet traction-adding differential technology. It combines the automatic street-friendly smooth operation of a limited-slip differential with the traction performance of a locking differential. The Powertrax No-Slip locker easily installs in to your differential carrier using basic tools and without affecting your ring and pinion settings. Powertrax Grip-Lok, Lock-Right Lockers and No-Slip Traction Systems automatically provide 100% traction on-demand, under the toughest circumstances. The Powertrax Grip-Pro and Grip-LS performance limited slips offer smooth dependable torque transfer and traction for the best of both worlds!
See More
Motive Gear – Axle Shaft (Part No.D6TZ4234A)
from
$151.99
The Motive Gear replacement axle shaft offers an OE-quality axle shaft at a fraction of the OE cost. Manufactured from 1541H material on high-tolerance CNC equipment, this axle shaft is designed to provide a perfect fit every time.
Product Features:
See More
Product Features:
- AXLE SHAFT 9″ 31 SPL. 31 27/32″ O.A.
Yukon Gear – Adaptor Washer For 28 Spline Pinion In Oversize Support, For 9" Ford (Part No.32240)
from
$71.99
Adaptor washer for 28 spline pinion in oversize support, for 9″ Ford.
Product Features:
See More
Product Features:
- Adapter washer
- Fits Ford 9″
- Adapts 28 spline pinion into 35 spline pinion support
FAG US – Repair Sleeve (Part No.SR3501)
from
$62.99
The FAG repair sleeve is a precision element that provides additional sealing for damaged shafts. Made of heat-treated stainless steel, the FAG repair sleeve signifcantly increases the life of the shaft and prevents premature wear. Since no shaft removal or machining is required during the repair, the repair sleeve is a cost effective repair solution to protect damaged surfaces.
Product Features:
See More
Product Features:
- High-precision and High-quality components used in all KITs
- Coverage of classic and new high-tech solutions for the best system coverage
National – Drive Shaft Center Support Bearing (Part No.HB-88508-A)
from
$73.99
Designed to meet or exceed OE quality, premium-quality bearings from National are manufactured to exacting standards to deliver lasting performance and extended bearing life.
Product Features:
See More
Product Features:
- BUILT TO LAST – Advanced heat treatment process for strength
- PREMIUM MATERIALS – Precision manufactured using premium-grade steel for lasting performance and extended bearing life
- RELIABLE PERFORMANCE – Element size and quantity are engineered to meet or exceed the load rating of OE bearings
- COMPREHENSIVE COVERAGE – Industry-leading coverage for domestic and import applications
- RIGOROUS TESTING – Comprehensive testing throughout design and development processes by National engineers for quality you can count on
Yukon Gear – Axle Bearing For 9" Ford, 3.150" O.D. (Part No.10062)
from
$128.99
F9″ Large sealed able bearing , ID = 1.562″ OD = 3.150″ w/Outer O-ring (no Inner seal required) . This axle bearing & seal kit services one side only.
Product Features:
See More
Product Features:
- Axle bearing for Ford 9″
- Sealed design
- 3.150″ O.D.
- 1.562″ I.D.
- Services one side
Yukon Gear – Side Gear With Hub For 9" Ford With 31 Splines (Part No.16161)
from
$47.99
Side gear with hub for 9″ Ford with 31 splines.
Product Features:
See More
Product Features:
- Side gear with hub
- Fits Ford 8″ and 9″ standard open differential and Trac Loc positraction with 31 spline axles
Driveworks – Universal Joint (Part No.DW-369)
from
$15.99
Driveworks Universal Joints are designed to meet or exceed OE fit, form, and function. These universal joints are set to provide superior quality and easy installation. Driveworks Universal Joints are constructed from quality materials for extended durability. Driveworks Universal Joints are pre-lubricated with premium grease to provide a longer service life. The grease fittings are pre-installed to allow for easy maintenance (where applicable).
Product Features:
See More
Product Features:
- The cross is hot forged for the higher torque and horsepower
- The bearing cups are made by cold forging, having higher strength and better rigidity
- Bearing cups allow 360 lubricant distribution to bearing surfaces, and are precision-ground for maximum load-carrying capabilities
- Lubrication grooves are designed to ensure grease penetration to entire journal and needle bearings
- Grease fitting in the cross allows for easy maintenance and the flexible use of the whole assembly
- Snap rings are held to strict tolerances to ensure proper cup position and retention
- Nitrile rubber seals to optimize grease retention and reduce contamination
Yukon Gear – Spindle Nut For Dana 60, 1.750" I.D., 6 Sided (Part No.33476)
from
$15.99
Spindle nut for Dana 60, 1.750″ I.D., 6 sided. This replaces Spicer part number 30636.
Product Features:
See More
Product Features:
- Spindle nut
- Fits Dana Spicer 60
- 6 sides
- 1.750″ I.D.
Powertrax – No-Slip Traction System (Part No.9206883108)
from
$544.99
For vehicles that are driven daily, the Powertrax No-Slip Traction System is the latest design in quiet traction-adding differential technology. It combines the automatic street-friendly smooth operation of a limited-slip differential with the traction performance of a locking differential. The Powertrax No-Slip locker easily installs in to your differential carrier using basic tools and without affecting your ring and pinion settings. Powertrax Grip-Lok, Lock-Right Lockers and No-Slip Traction Systems automatically provide 100% traction on-demand, under the toughest circumstances. The Powertrax Grip-Pro and Grip-LS performance limited slips offer smooth dependable torque transfer and traction for the best of both worlds!The Powertrax® Lock-Right Locker provides outstanding traction for off-road machines and race vehicles. Powertrax No-Slip Traction Systems deliver excellent performance to street-driven cars and trucks.Powertrax® lockers range from the original, Lock-Right for serious straight-line performance, to the No-Slip traction system for street-able vehicles. Powertrax® offers three levels of GRIP locking differentials, ranging from the clutch-type GRIP LS with a forged steel case, the gear-driven GRIP PRO and finally the GRIP LOK for extreme traction. Powertrax® = Extreme Traction Systems!
See More
Yukon Gear – Bearing Race Driver (Part No.56023)
from
$219.99
Bearing race driver. No return.
Product Features:
See More
Product Features:
- Bearing race driver
- Fits M88010 race
- All steel construction
Yukon Gear – Ford 9" Pinion Support, 35 Spline, 10 Hole, No Races Included (Part No.32165)
from
$569.99
Ford 9″ pinion Support, 35 spline, 10 hole, no races included.
Product Features:
See More
Product Features:
- Fits Ford 9″ with 35 spline pinion
- Larger inner pinion bearing reduces gear deflection under high load
- 6061 aluminum
- 10 bolt holes
- Does not include races
Yukon Gear – O-Ring For 9" Ford (Part No.30028)
from
$14.99
O-ring for 9″ Ford.Yukon Mighty seal.
Product Features:
See More
Product Features:
- Pinion support o-ring
- Fits Ford 9″
Driveworks – Ball Bearing (Part No.S-HB-88107-A)
FAG US – Cone (Part No.KL68149)
from
$13.99
Our wheel seals are engineered using only the highest-quality materials to meet vehicle manufacturer specificatons. We work with suppliers to design seals that meet FAG’s quality standards. Seals are designed to protect wheel end components from contamination – such as dirt, dust, and moisture – and prevent the loss of grease over the life of the bearing. The specifications for wheel seals are very demanding, and the type required depends on the specific application, position and vehicle class.
Product Features:
See More
Product Features:
- High-precision and High-quality components used in all KITs
- Coverage of classic and new high-tech solutions for the best system coverage
Yukon Gear – Trao Loc Spring For Ford 8.8", 31 Spline (Part No.33516)
Yukon Gear – Outer Oil Slinger For Ford 7.5", 8.8", 9", 10.25" (Part No.33022)
from
$8.99
Replacement outer oil slinger for Ford 7.5″, 8.8″, 9″, 10.25″, Nissan Titan rear, Dana 44 Rubicon & 44 JK non-Rubicon.
Product Features:
See More
Product Features:
- Outer oil slinger for Ford 10.25″, 7.5″, 8.8″ and 9″ also Jeep JK and Nissan Titan rear
Yukon Gear – DrvShftPinYoke (Part No.33574)
from
$12.99
DrvShftPinYoke
Yukon Gear – Side Gear And Thrust Washer (0.750" Shaft) For 8.8" Ford (Part No.33298)
from
$6.99
Side gear thrust washer (0.750″ shaft) for 8.8″ Ford.
Product Features:
See More
Product Features:
- Side gear thrust washer for Ford 8.8″
- 0.750″ diameter cross pin shaft applications only
Yukon Gear – Replacement Chrome Cover For Dana 44 (Part No.32004)
from
$67.99
0.080″ thick Chrome replacement cover for Dana 44.
Product Features:
See More
Product Features:
- Fits standard rotation Dana Spicer 44
- Chrome
Pro-King – Differential Ring Gear Bolt (Part No.761A935)
from
$1.29
Pro-King is the leading supplier of transmission and driveline products in the aftermarket.
Product Features:
See More
Product Features:
- All products are designed to meet or exceed OE quality, form, fit and funtion.
Yukon Gear – Conversion Bearing For Small Bearing Ford 9" Axle In Large Bearing Housing (Part No.18046)
from
$92.99
Conversion bearing for small bearing Ford 9″ axle in large bearing housing.
Product Features:
See More
Product Features:
- Axle bearing
- Fits Ford 9″
- Conversion bearing to install small bearing axle into large bearing housing
- 3.150″ O.D.
- 1.377″ I.D.
USA Standard Gear – Spartan Locker Replacement Cross Pin For Dana 44 (Part No.17017)
from
$46.99
Product Features:
See More
- USA Standard Gear heavy-duty cross pin shaft
- Fits Dana Spicer 44
- Works with Spartan Locker or standard open spider gears
USA Standard Gear – 9" Ford Spartan Locker Cross Pin, Long (Part No.17021)
from
$49.99
Product Features:
See More
- USA Standard Gear heavy-duty cross pin shaft
- Fits Ford 9″
- Works with Spartan Locker or standard open spider gears
- Long shaft
Upgrade your 1987 Ford E-150 Econoline with Top-Quality Drivetrains
When it comes to maintaining or upgrading your 1987 Ford E-150 Econoline, nothing is more important than using high-quality OEM or aftermarket parts that you can trust. Whether you’re repairing damage to your Ford or enhancing its overall performance, Drivetrains are key to keeping your E-150 Econoline functioning at its best. At Advance Auto Parts, we offer a wide selection of 447 Drivetrains for the 1987 Ford E-150 Econoline, designed to meet your needs without breaking the bank.
From
Differential
replacements to
Drive Shafts and Axles
upgrades, we’ve got you covered with parts that fit your vehicle perfectly and ensure long-lasting performance.
Affordable Prices and Wide Selection
Shopping for Drivetrains for any vehicle can be a hassle, especially if you’re on a budget. But with Advance Auto Parts, you can find high-quality Drivetrains for your 1987 Ford E-150 Econoline at great prices.
Our Drivetrains inventory for this model
ranges from just $1.29 to $2,199.99, with
an average price of $276.64.
Our 447 Drivetrains in stock come from 21 trusted brands, so you’re sure to find the right part for your 1987 Ford E-150 Econoline without overspending.
Top Brands and High Customer Satisfaction
Advance Auto Parts takes pride in offering only the best brands in the automotive industry. For your 1987 Ford E-150 Econoline, we stock popular OEM and aftermarket Drivetrains from top names
like National, Dorman, Motive Gear, and more.
National Drivetrains
start at just $7.99 and boast an impressive 4.3 stars average rating from customers.
Dorman and Motive Gear also bring quality to the table, with Drivetrains available starting at $3.49, and at an average 4.2 stars rating.
With 5,886 customer reviews and counting, our 1987 Ford E-150 Econoline Drivetrains have a strong track record of reliability, ensuring you can trust your purchase.
Explore Related Parts and More
While you’re here, don’t forget to check out other essential categories that go hand in hand with Drivetrain upgrades. Explore related part types like Batteries and Chargers, Oil and Lubricants
and more to make sure your 1987 Ford E-150 Econoline is always ready to roll. We’re committed to providing you with everything you need to keep your E-150 Econoline in top shape, all in one place.
Start shopping confidently below for your 1987 Ford E-150 Econoline!
Best-Selling Differentials for 1987 Ford E-150 Econolines
Enhance the driving experience in your Ford with 381 quality Differential components, starting at $1.29.
National – Multi-Purpose Bearing (Part No.A-13)
from
$13.79
Product Features:
See More
- CONSISTENT PERFORMANCE: Matched cup and cone components ensure consistent performance
- PREMIUM MATERIALS: Precision manufactured using premium-grade steel for outstanding durability and performance
- SMOOTH ROTATION: Crowned raceways and rollers for even load distribution
- OE-STYLE DESIGN: Engineered to meet OE specifications
- COMPREHENSIVE COVERAGE: Industry-leading coverage for domestic and import applications
- RIGOROUS TESTING: Comprehensive testing throughout design and development processes by National engineers for quality you can count on
National – Bearing Race (Part No.M88010)
from
$7.99
Manufactured with premium-grade steel, National taper bearing cups feature crowned raceways to ensure even load distribution.
Product Features:
See More
Product Features:
- PREMIUM MATERIALS – Precision manufactured using premium-grade steel for outstanding durability and performance
- SMOOTH ROTATION – Crowned raceways for even load distribution
- OE-STYLE DESIGN – Engineered to meet OE specifications
- COMPREHENSIVE COVERAGE – Industry-leading coverage for domestic and import applications
- RIGOROUS TESTING – Comprehensive testing throughout design and development processes by National engineers for quality you can count on
Motive Gear – Differential Pinion Shim Kit (Part No.1100)
from
$7.99
High-quality Differential Component Shim
Product Features:
See More
Product Features:
- SHIM KIT FITS-8.25-F7.5-AMC20-GM0
Motive Gear – Differential Master Bearing Kit – Koyo (Part No.R8.8RMK)
from
$126.99
Motive Gear Differential Bearing Kits Include Front & Rear Pinion Bearing, Pinion Seal, Carrier Bearings, Pilot Bearing Where Applicable, Gear Marking Compound, Crush Sleeve, Pinion Nut, Brush, Thread Locking Compound And Cover Gasket Or Rtv
Product Features:
See More
Product Features:
- KIT BRG&SL FORD MSTR 8.8
National – Shaft Repair Sleeve (Part No.99199)
from
$37.99
National has built a reputation as one of the most respected names in the industry. We have offered premium sealing solutions for more than 75 years. Our design team keeps pace with the industry and provides advanced solutions for today’s vehicles.
Product Features:
See More
Product Features:
- Designed to repair damaged, grooved or worn shafts
- Durable stainless steel construction for corrosion-free sealing surface that surpasses most original shaft specifications
- Ideal for a shaft where indications of seal wear, such as tracks or grooves have developed
- Ultra-thin construction (0.01/0.25mm wall thickness) allows original seal size to be used with minimal additional lip loading
- Easy to install with removable flange and installation tool
Motive Gear – Differential Ring and Pinion (Part No.F8.8-410A)
Felpro – Axle Housing Cover Gasket Rectangular Shaped, 10 Bolt Hole Gasket (Part No.RDS 55341)
from
$15.99
Fel-Pro gaskets are specifically designed for the repair environment to deliver a reliable seal on even the most troublesome applications. Designed for imperfect sealing surfaces and manufactured with proprietary materials, you can count on Fel-Pro for innovative sealing solutions for the real-world repair environment.
Product Features:
See More
Product Features:
- Meets or exceeds all original equipment specifications
- Application specific design to ensure a perfect fit
- Engineered for the sealing repair environment
- Validated for fit, form and function
- Unsurpassed quality you can trust
Dorman – Differential Cover (Part No.697-702)
from
$41.99
This direct replacement differential cover matches the fit and function of the original equipment diff cover for a reliable, leak-free repair. It features a durable design, made to strict specifications, to help ensure reliable service life.
Product Features:
See More
Product Features:
- Direct replacement – this differential cover matches the fit and function of the original equipment diff cover on select vehicles
- Reliable repair – the smart solution for fixing an existing cover that’s rusted, damaged or leaking differential fluid
- Durable construction – this differential cover is made according to strict engineering standards to help ensure dependability
- Trustworthy quality – backed by a team of product experts in the United States and more than a century of automotive experience
Driveworks – Tapered Cone/Cup Wheel Bearing Set (Part No.S-A-13)
from
$9.99
Value-priced bearing meets all cataloged application requirements.
Product Features:
See More
Product Features:
- Brand may vary by location
Motive Gear – Differential Carrier Gear Kit (Part No.F8.8BI)
Dorman – Help – Differential Shaft Lock Bolt (Part No.81048)
from
$6.79
This differential pinion shaft lock bolt is designed to match the fit and function of the original part on specified vehicles. Made of quality materials, it is engineered for reliable performance.
Product Features:
See More
Product Features:
- Direct replacement – this differential pinion shaft lock bolt matches the fit and function of the factory part on specified years, makes and models
- Ideal solution – this bolt is a reliable replacement for an original part that is missing or has failed due to fatigue
- Durable construction – this part is made from quality materials to ensure reliable performance and long service life
- Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience
National – Multi-Purpose Bearing (Part No.A-36)
from
$27.99
Product Features:
See More
- CONSISTENT PERFORMANCE: Matched cup and cone components ensure consistent performance
- PREMIUM MATERIALS: Precision manufactured using premium-grade steel for outstanding durability and performance
- SMOOTH ROTATION: Crowned raceways and rollers for even load distribution
- OE-STYLE DESIGN: Engineered to meet OE specifications
- COMPREHENSIVE COVERAGE: Industry-leading coverage for domestic and import applications
- RIGOROUS TESTING: Comprehensive testing throughout design and development processes by National engineers for quality you can count on
Motive Gear – Differential Master Bearing Kit – Timken (Part No.R8.8RMKT)
from
$137.99
Motive Gear Differential Bearing Kits Include Front & Rear Pinion Bearing, Pinion Seal, Carrier Bearings, Pilot Bearing Where Applicable, Gear Marking Compound, Crush Sleeve, Pinion Nut, Brush, Thread Locking Compound And Cover Gasket Or Rtv
Product Features:
See More
Product Features:
- MASTER KIT FORD 8.8″
Motive Gear – Differential Pinion Nut (Part No.379570S)
from
$6.99
All Motive Gear products are engineered for their specific application and manufactured in state of the art facilities. All of our products undergo rigid quality control processes to insure proper fit, performance and longevity. Motive Gear products can be found in the winners circle at NHRA, IHRA, NMRA, NMCA, SODA, SCORE, BITD, Ultra-4 and NASCAR events because we offer unmatched selection and quality demanded by racers and their crew chiefs – the same quality and selection demanded by DIY customers and top mechanics. With four warehouses strategically located across North America, most Motive Gear orders arrive within 2-4 days. Win with Motive Gear!
See More
National – Axle Differential Bearing & Seal Kit (Part No.RA-311)
from
$169.99
The National bearing & seal kit includes all the components required to complete the repair.
Product Features:
See More
Product Features:
- COMPLETE SOLUTION – Includes everything needed to complete the repair
- STRONG AND DURABLE – Controlled heat treatment process for strength and durability
- COMPREHENSIVE COVERAGE – Industry-leading coverage for domestic and import applications
- RIGOROUS TESTING – Comprehensive testing throughout design and development processes by National engineers for quality you can count on
- Professional technicians know they can depend on National
Motive Gear – Axle Shaft (Part No.E7TZ4234A)
from
$155.99
The Motive Gear replacement axle shaft offers an OE-quality axle shaft at a fraction of the OE cost. Manufactured from 1541H material on high-tolerance CNC equipment, this axle shaft is designed to provide a perfect fit every time.
Product Features:
See More
Product Features:
- AXLE SHAFT 8.8″ 31 SPL. R.H. 31 1/6″ O.A. 87-96
Dorman – Differential Yoke including Seal and Pinion Nut (Part No.697-507)
from
$48.99
A worn or damaged differential pinion flange can lead to driveline vibrations and fluid leaks. This part is designed to match the performance of the original equipment pinion flange on specified vehicles. It has been engineered to help restore a secure and reliable connection between the differential pinion and the drive shaft when the original flange is rusted, worn or damaged. It is made of rugged materials for reliable service and durability.
Product Features:
See More
Product Features:
- Direct replacement – this differential pinion flange is designed to match the performance of the original equipment flange on specified vehicles
- Ideal solution – engineered to help restore a secure and reliable connection between the differential pinion and the drive shaft when the original flange is worn or damaged
- Durable construction – designed and manufactured to strict specifications for reliable performance
- Trustworthy quality – backed by a team of product experts in the United States and more than a century of automotive experience
National – Axle Differential Bearing & Seal Kit (Part No.RA-311MK)
from
$112.99
The National bearing & seal kit includes all the components required to complete the repair.
Product Features:
See More
Product Features:
- COMPLETE SOLUTION – Includes everything needed to complete the repair
- STRONG AND DURABLE – Controlled heat treatment process for strength and durability
- COMPREHENSIVE COVERAGE – Industry-leading coverage for domestic and import applications
- RIGOROUS TESTING – Comprehensive testing throughout design and development processes by National engineers for quality you can count on
- Professional technicians know they can depend on National
Motive Gear – Differential Carrier Shim Kit (Part No.1101)
from
$8.99
High-quality Differential Carrier Shim Kit
Product Features:
See More
Product Features:
- CARRIER SHIMS 12 BOLT GM CAR & TRUCK ALSO GM8.6″ 99-ON
Driveworks – Oil Seal (Part No.S-3604)
from
$5.99
Value-priced seal meets all cataloged application requirements.
Product Features:
See More
Product Features:
- Brand may vary by location
ATP – DIFF COVER KIT (Part No.111103)
from
$37.99
DIFF COVER KIT
Motive Gear – Differential Clutch Pack (Part No.F8.8CPK)
Yukon Gear – Cover Bolt For Ford 7.5", 8.8" & 9.75" (Part No.33554)
from
$6.99
Yukon 1541H alloy replacement rear axle for Dana 60, 70, and 80, 35 spline. (40″ to 43.5″) Full float axle (8×3.96″ ). Yukon 1541H alloy axles offer a strength increase over stock while retaining a low cost. Yukon 1541H alloy rear axles come with a one year warranty against manufacturing defects. This is a full-floating axle.
Product Features:
See More
Product Features:
- 35 spline
- 8 x 3.96″ bolt pattern
- Cut to length design fits 40″-43.5″ applications
- Fits Dana Spicer 60, 70 and 80
Dorman – Help – Pinion Crush Sleeves (Part No.81056)
from
$6.49
This differential crush sleeve is designed to match the fit and function of the original sleeve on specified vehicles, and is engineered for durability and reliable performance.
Product Features:
See More
Product Features:
- Direct replacement – this differential crush sleeve is designed to match the fit and function of the original sleeve on specified vehicles
- Required replacement – when servicing the differential
- Durable construction – this part is made from quality materials to ensure reliable performance and long service life
- Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience
Most Popular 1987 Ford E-150 Econoline Drive Shafts and Axles
Customize your Ford with 25 Drive Shafts and Axles products
like Axle Shaft Seals,
Center Support Bearings, and
Axle Shaft Bearings, all
priced under $689.99.
Dorman – Help – Driveshaft Flange Bolts (Part No.80992)
from
$22.49
This drive shaft bolt is designed to match the fit and function of the original part on specified vehicles. Made of quality materials, it is engineered for reliable performance.
Product Features:
See More
Product Features:
- Direct replacement – this engine mount bolt matches the fit and function of the factory part on specified years, makes and models
- Ideal solution – this drive shaft bolt is a reliable replacement for an original part that is missing or has failed due to fatigue
- Durable construction – this part is made from quality materials to ensure reliable performance and long service life
- Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience
National – Bearing (Part No.M88048)
from
$13.99
National Oil Seals & Bearings offer a full line of premium oil seals and bearings.
Product Features:
See More
Product Features:
- PREMIUM MATERIALS — Precision manufactured using premium-grade steel for outstanding durability and performance
- SMOOTH ROTATION — Crowned raceways and rollers for even load distribution
- OE-STYLE DESIGN — Engineered to meet OE specifications
- COMPREHENSIVE COVERAGE — Industry-leading coverage for domestic and import applications
- RIGOROUS TESTING — Comprehensive testing throughout design and development processes by National engineers for quality you can count on
Anchor – Center Support Bearing Motor Mount: Center, 1 Piece (Part No.6038)
from
$40.99
Center support bearings or Carrier Support Bearings are used when the driveshaft is split into two sections. It serves as a junction on the drive shaft between the transmission and the differential allowing the driveshaft to flex, relieving stress on other drive line components. Each part is engineered and designed to OE Standards. Applicable to AUTOCAR 84-88; CHEV 60-02; DODGE 57-02; FORD 55-07; GMC 63-02; INTL 57-02; KW 81-18; MACK 80-83; PTRB 65-83; WHGM 88-95; WHIT 81-88;. Please verify your application.
Product Features:
See More
Product Features:
- MAXIMUM VIBRATION DAMPENING: Rubber cushion is made of high grade rubber that ensures maximum dampening of vibration and the ability to absorb over loads.
- HEAVY GAUGE STEEL FRAME: The housing frame is made from heavy gauge steel with durability that extends the service life.
- READY TO INSTALL: Most center supports include a sealed bearing and dust shield and are ready to install.
- For Years: 1955-2018
- Weight approx: 4 Lbs
- BEARING ID / BORE: 1.5750 INCH / 40 MM
- CENTERLINE: 2.48 INCH / 63 MM
- MOUNT WIDTH: 6.62 INCH / 168 MM
- STYLE: ROUND FRAME
- NOT PICTURED: TWO DUST SHIELDS
National – Multi-Purpose Seal (Part No.8835S)
from
$11.99
National has built a reputation as one of the most respected names in the industry. We have offered premium sealing solutions for more than 75 years. Our design team keeps pace with the industry and provides advanced solutions for today’s vehicles.
Product Features:
See More
Product Features:
- Design type: spring loaded; single-lip
- Temperature range: -40 Deg. F to 225 Deg. F / -40 Deg. C to 107 Deg. C
- Good low temperature capability
- Low swell in hydrocarbon fluids
- Delivers quality and reliable performance for every type of repair
National – Drive Shaft Center Support Bearing (Part No.HB-88508-A)
from
$73.99
Designed to meet or exceed OE quality, premium-quality bearings from National are manufactured to exacting standards to deliver lasting performance and extended bearing life.
Product Features:
See More
Product Features:
- BUILT TO LAST – Advanced heat treatment process for strength
- PREMIUM MATERIALS – Precision manufactured using premium-grade steel for lasting performance and extended bearing life
- RELIABLE PERFORMANCE – Element size and quantity are engineered to meet or exceed the load rating of OE bearings
- COMPREHENSIVE COVERAGE – Industry-leading coverage for domestic and import applications
- RIGOROUS TESTING – Comprehensive testing throughout design and development processes by National engineers for quality you can count on
National – Drive Shaft Center Support Bearing (Part No.HB-88107-A)
from
$44.99
Designed to meet or exceed OE quality, premium-quality bearings from National are manufactured to exacting standards to deliver lasting performance and extended bearing life.
Product Features:
See More
Product Features:
- BUILT TO LAST – Advanced heat treatment process for strength
- PREMIUM MATERIALS – Precision manufactured using premium-grade steel for lasting performance and extended bearing life
- RELIABLE PERFORMANCE – Element size and quantity are engineered to meet or exceed the load rating of OE bearings
- COMPREHENSIVE COVERAGE – Industry-leading coverage for domestic and import applications
- RIGOROUS TESTING – Comprehensive testing throughout design and development processes by National engineers for quality you can count on
Anchor – Center Support Bearing Motor Mount: Center, 1 Piece (Part No.6056)
from
$21.49
Center support bearings or Carrier Support Bearings are used when the driveshaft is split into two sections. It serves as a junction on the drive shaft between the transmission and the differential allowing the driveshaft to flex, relieving stress on other drive line components. Each part is engineered and designed to OE Standards. Applicable to AUTOCAR 84-88; CHECKER 55-82; CHEV 60-12; DODGE 57-02; FORD 55-10; GMC 63-07; INTL 57-02; ISUZU 96-01; KW 81-18; MACK 80-90; MAZDA 87-94; MITS 87-09; OLDS 90-01; PLYM 80-83; PTRB 65-83; WHGM 88-95; WHIT 81-88;. Please verify your application.
Product Features:
See More
Product Features:
- MAXIMUM VIBRATION DAMPENING: Rubber cushion is made of high grade rubber that ensures maximum dampening of vibration and the ability to absorb over loads.
- HEAVY GAUGE STEEL FRAME: The housing frame is made from heavy gauge steel with durability that extends the service life.
- READY TO INSTALL: Most center supports include a sealed bearing and dust shield and are ready to install.
- For Years: 1955-2018
- Weight approx: 3 Lbs
- BEARING ID / BORE: 1.3780 INCH / 35 MM
- CENTERLINE: 2.28 INCH / 58 MM
- MOUNT WIDTH: 6.62 INCH / 168 MM
- STYLE: ROUND FRAME
- COMPLETE MOUNT
Driveworks – Ball Bearing (Part No.S-HB-88107-A)
Yukon Gear – Wheel Lug Stud (Part No.33571)
from
$7.99
Wheel Lug Stud
Yukon Gear – R1559Tv Rear Axle Bearing And Seal Kit (Part No.10001)
from
$52.99
Yukon axle bearing & seal kits are specially designed for each application & use all high quality bearings & seals. R1559TV axle bearing and seal kit, TorringtonBrand, 2.530″ OD, 1.620″ ID This axle bearing & seal kit services one side only.
Product Features:
See More
Product Features:
- Includes axle bearing and seal
- Services one side
- Torrington Brand
- 2.530″ O.D.
- 1.620″ I.D.
Yukon Gear – C/Clip (Part No.33083)
from
$8.99
C/Clip for Chrysler 8.25″, Ford 7.5″, 8.8″, GM 12 bolt car & truck, 8.2″, 8.5″ & 8.6″.
Product Features:
See More
Product Features:
- c-clip for Chrysler 8.25″, Ford 8.8″, GM 12 bolt car and truck and GM 8.2″, 8.5″ and 8.6″
- .150″ thick
Yukon Gear – Axle Stud , 58Mm X M14-2.0 (Part No.33557)
Yukon Gear – Axle Seal, For 1559 Or 6408 Bearing (Part No.30201)
from
$7.99
Axle seal, for 1559 OR 6408 bearing, NOT COARSE spline 12T.Yukon Mighty seal.
Product Features:
See More
Product Features:
- Rear axle seal
- 2.530″ O.D.
Yukon Gear – Fill Plug For Ford 9", 1/2" Thread (Part No.33539)
from
$10.99
Yukon Ring & Pinion sets give you the confidence of knowing you’re running gears designed for the harshest of conditions. Whether it’s on the street, off-road, or at the track; Yukon ring & pinion sets deliver unrivaled performance & quality. Yukon uses t
Product Features:
See More
Product Features:
- Fill plug
- Fits Ford 9″
Yukon Gear – Tapered Axle Bearing And Seal Kit, 3.150" Od, For 9" Ford (Part No.10058)
from
$111.99
Yukon axle bearing & seal kits are specially designed for each application & use all high quality bearings & seals. Tapered axle bearing and seal kit, 3.150″ OD, for 9″ Ford. This axle bearing & seal kit services one side only.
Product Features:
See More
Product Features:
- Axle bearing and seal kit for Ford 9″ rear
- Includes axle bearing and seal
- Tapered roller design
- 3.150″ O.D.
- 1.562″ I.D.
- Services one side
Yukon Gear – Axle Bearing Retainer For Ford 9", Large Bearing, 1/2" Bolt Holes (Part No.33467)
from
$67.99
Product Features:
See More
- Axle bearing retainer for Ford 9″
- Fits large bearing applications
- 1/2″ bolt holes
- 3 1/2″ x 2 3/8″ bolt pattern
Yukon Gear – Outer Axle Seal For Set 20 Bearing (Part No.30030)
from
$14.99
Outside seal (included in TK set20).Yukon Mighty seal.
Product Features:
See More
Product Features:
- Outer axle seal
- Works with Set20 bearing
Yukon Gear – Axle Bearing For 9" Ford, 3.150" O.D. (Part No.10062)
from
$128.99
F9″ Large sealed able bearing , ID = 1.562″ OD = 3.150″ w/Outer O-ring (no Inner seal required) . This axle bearing & seal kit services one side only.
Product Features:
See More
Product Features:
- Axle bearing for Ford 9″
- Sealed design
- 3.150″ O.D.
- 1.562″ I.D.
- Services one side
Yukon Gear – The Carrier Bearing Puller (Part No.56034)
from
$689.99
The Yukon carrier bearing Puller works with an impact gun to quickly and safely remove carrier bearings without damaging them. This unit comes with a handy bench top stand and works with up to most standard one ton applications. This unit is works with differentials up to one-ton applcations. It is not compatible with Dana 70HD, Dana 80, 10.25″ & 10.5″ Ford, or GM & Chrysler 11.5″ differentials.
Product Features:
See More
Product Features:
- Carrier bearing puller
- Works with an impact gun to safely and easliy remove carrrier bearings
- Not compatible with Dana 70HD, Dana 80, Ford 10.25″ and 10.5″ or Gm and Chrysler 11.5″ applications
Yukon Gear – Forged Yoke For Ford 8.8" With A 1350 U/Joint Size (Part No.41051)
from
$246.99
Yukon forged yoke for Ford 8.8″ with a 1350 U/joint size (stronger than billet). 3.625″ snap ring span, 1.188″ cap diameter. Outside snap ring. All Yukon yokes come with a one year warranty against manufacturing defects.
Product Features:
See More
Product Features:
- Fits Ford 8.8″
- 30 spline
- 1350 u-joint size
- Outside snap ring design
- 3.625″ snap ring span
- 1.188″ cap diameter
- U-bolt style
Yukon Gear – Conversion Bearing For Small Bearing Ford 9" Axle In Large Bearing Housing (Part No.18046)
from
$92.99
Conversion bearing for small bearing Ford 9″ axle in large bearing housing.
Product Features:
See More
Product Features:
- Axle bearing
- Fits Ford 9″
- Conversion bearing to install small bearing axle into large bearing housing
- 3.150″ O.D.
- 1.377″ I.D.
Yukon Gear – Adaptor Washer For 28 Spline Pinion In Oversize Support, For 9" Ford (Part No.32240)
from
$71.99
Adaptor washer for 28 spline pinion in oversize support, for 9″ Ford.
Product Features:
See More
Product Features:
- Adapter washer
- Fits Ford 9″
- Adapts 28 spline pinion into 35 spline pinion support
Yukon Gear – Axle Bearing Retainer For Ford 9", Large & Small Bearing, 3/8" Bolt Holes (Part No.33466)
from
$22.99
Product Features:
See More
- Axle bearing retainer for Ford 9″
- Fits large and small bearing applications
- 3/8″ bolt holes
- 3 9/16″ x 2″ bolt pattern
Yukon Gear – Axle Bearing Retainer For Ford 9", Small Bearing, 3/8" Bolt Holes (Part No.33468)
from
$22.99
Product Features:
See More
- Axle bearing retainer for Ford 9″
- Fits small bearing applications
- 3/8″ bolt holes
- 3 5/16″ x 2″ bolt pattern
Top Picks for 1987 Ford E-150 Econoline Spindles
Upgrade Ford E-150 Econolines with top-quality Spindles parts, including 6 OEM and aftermarket selections for your 1987 model.
Dorman – Standard Spindle Nut 3/4 In.-16 Hex Size 1-1/16 In. (Part No.615-072.1)
from
$3.49
This spindle nut is designed to match the fit and function of the original part on specified vehicles. Made of quality materials, it is engineered for reliable performance.
Product Features:
See More
Product Features:
- Direct replacement – this spindle nut matches the fit and function of the factory part on specified years, makes and models
- Ideal solution – this nut is a reliable replacement for an original part that is missing or has failed due to fatigue
- Durable construction – this part is made from quality materials to ensure reliable performance and long service life
- Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience
Dorman – Spindle Nut 3/4 In.-16 and M20 In.-1.0 Hex Size 1-1/16 In. and 27mm (Part No.615-073.1)
from
$5.49
This spindle nut retainer is designed to match the fit and function of the original part on specified vehicles. Made of quality materials, it is engineered for reliable performance.
Product Features:
See More
Product Features:
- Direct replacement – this spindle nut retainer matches the fit and function of the factory part on specified years, makes and models
- Ideal solution – this retainer is a reliable replacement for an original part that is missing or has failed due to fatigue
- Durable construction – this part is made from quality materials to ensure reliable performance and long service life
- Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience
Dorman – Spindle Nut 3/4 In.-16 and M20 In.-1.0 Hex Size 1-1/16 In. and 27mm (Sold by each) (Part No.615-073)
from
$5.99
This spindle nut retainer is designed to match the fit and function of the original part on specified vehicles. Made of quality materials, it is engineered for reliable performance.
Product Features:
See More
Product Features:
- Direct replacement – this spindle nut retainer matches the fit and function of the factory part on specified years, makes and models
- Ideal solution – this retainer is a reliable replacement for an original part that is missing or has failed due to fatigue
- Durable construction – this part is made from quality materials to ensure reliable performance and long service life
- Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience
Dorman – Spindle Washer – I.D. 3/4 In. O.D. 1-21/32 In. Thickness 3/32 In. (Sold by each) (Part No.618-033)
from
$4.79
This spindle nut washer is designed to match the fit and function of the original part on specified vehicles. Made of quality materials, it is engineered for reliable performance.
Product Features:
See More
Product Features:
- Direct replacement – this spindle nut washer matches the fit and function of the factory part on specified years, makes and models
- Ideal solution – this washer is a reliable replacement for an original part that is missing or has failed due to wear
- Durable construction – this part is made from quality materials to ensure reliable performance and long service life
- Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience
Dorman – Standard Spindle Nut 3/4 In.-16 Hex Size 1-1/16 In. (sold by each) (Part No.615-072)
from
$4.79
This spindle nut is designed to match the fit and function of the original part on specified vehicles. Made of quality materials, it is engineered for reliable performance.
Product Features:
See More
Product Features:
- Direct replacement – this spindle nut matches the fit and function of the factory part on specified years, makes and models
- Ideal solution – this nut is a reliable replacement for an original part that is missing or has failed due to fatigue
- Durable construction – this part is made from quality materials to ensure reliable performance and long service life
- Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience
Dorman – Spindle Washer – I.D. 3/4 In. O.D. 1-21/32 In. Thickness 3/32 In. (Part No.618-033.1)
from
$3.99
This spindle nut washer is designed to match the fit and function of the original part on specified vehicles. Made of quality materials, it is engineered for reliable performance.
Product Features:
See More
Product Features:
- Direct replacement – this spindle nut washer matches the fit and function of the factory part on specified years, makes and models
- Ideal solution – this washer is a reliable replacement for an original part that is missing or has failed due to wear
- Durable construction – this part is made from quality materials to ensure reliable performance and long service life
- Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience
In-Demand Universal Joints for 1987 Ford E-150 Econolines
Select from 31 premium Universal Joints parts for your 1987 Ford E-150 Econoline, with prices ranging from $4.19 to $111.99.
Spicer – Universal Joint, Greaseable 1330 Series OSR (Part No.5-213X)
from
$42.99
When you see the Spicer name, you know you are buying the highest quality product available. Spicer universal joints are no exception. Dana manufactures a full line of Spicer universal joints that are engineered to ensure longer life for vehicles in a wide variety of applications, from light vehicle to commercial and off-highway.
Product Features:
See More
Product Features:
- OE engineering and field tested experience is why the Spicer brand is the most trusted in the industry.
- Forged with high-quality steel, these u-joints are heat treated and case-hardened with precision to specific levels, ensuring optimal strength and durability.
- The process of precision grinding the seal and bearing surfaces helps to improve the life of the seal and bearing.
- Zerk allows for lubricating at regular intervals to help extend the life of the part.
MOOG Driveline Products – Universal Joint U-Bolt Kit (Part No.534-10)
from
$11.99
By constantly introducing design enhancements that extend product life and simplify installation and replacement, MOOG has earned its reputation as the chassis industry’s Problem Solver.
Product Features:
See More
Product Features:
- For U-Joints 375, 430, 434 & 498
- Fits 1-1/8″ bearings
Brute Force – Universal Joint (Part No.2-4900BF)
MOOG Driveline Products – Greaseable Premium Universal Joint (Part No.354)
from
$34.99
Product Features:
See More
- COMPREHENSIVE COVERAGE – Available for foreign and domestic nameplates
- GREASABLE DESIGN – Greasable u-joints allow for new grease to flush out contaminants and moisture
- KEEPS DIRT OUT – Nitrile rubber grease seals use a compressed double lip design for effective protection against contaminants
- RIGOROUS TESTING – Comprehensive testing throughout design and development processes by MOOG engineers for quality you can count on
- STRONG AND DURABLE – Bearing cups are cold-forged, case-hardened and precision ground while steel cross is forged and carburized heat treated for strength and durability
- Cross forging shape and flash provide easier installation and high strength
Driveworks – Universal Joint (Part No.DW-354)
from
$31.99
Driveworks Universal Joints are designed to meet or exceed OE fit, form, and function. These universal joints are set to provide superior quality and easy installation. Driveworks Universal Joints are constructed from quality materials for extended durability. Driveworks Universal Joints are pre-lubricated with premium grease to provide a longer service life. The grease fittings are pre-installed to allow for easy maintenance (where applicable).
Product Features:
See More
Product Features:
- The cross is hot forged for the higher torque and horsepower
- The bearing cups are made by cold forging, having higher strength and better rigidity
- Bearing cups allow 360 lubricant distribution to bearing surfaces, and are precision-ground for maximum load-carrying capabilities
- Lubrication grooves are designed to ensure grease penetration to entire journal and needle bearings
- Grease fitting in the cross allows for easy maintenance and the flexible use of the whole assembly
- Snap rings are held to strict tolerances to ensure proper cup position and retention
- Nitrile rubber seals to optimize grease retention and reduce contamination
MOOG Driveline Products – Non-Greaseable Super Strength Universal Joint (Part No.254)
from
$29.99
Product Features:
See More
- BUILT TO LAST – Rugged design specifically engineered for applications with higher torque and horsepower
- COMPREHENSIVE COVERAGE – Available for foreign and domestic nameplates
- CORROSION PROTECTION – Exclusive MICRO SHIELD coating protects against rust and corrosion
- KEEPS DIRT OUT – Abrasion-resistant nitrile seals provide ideal grease retention and protection from under-vehicle contaminants
- RIGOROUS TESTING – Comprehensive testing throughout design and development processes by MOOG engineers for quality you can count on
- STRONG AND DURABLE – Bearing cups are cold-forged, case-hardened and precision ground while steel cross is forged and carburized heat treated for strength and durability
Driveworks – Universal Joint (Part No.DW-434)
from
$16.49
Driveworks Universal Joints are designed to meet or exceed OE fit, form, and function. These universal joints are set to provide superior quality and easy installation. Driveworks Universal Joints are constructed from quality materials for extended durability. Driveworks Universal Joints are pre-lubricated with premium grease to provide a longer service life. The grease fittings are pre-installed to allow for easy maintenance (where applicable).
Product Features:
See More
Product Features:
- The cross is hot forged for the higher torque and horsepower
- The bearing cups are made by cold forging, having higher strength and better rigidity
- Bearing cups allow 360 lubricant distribution to bearing surfaces, and are precision-ground for maximum load-carrying capabilities
- Lubrication grooves are designed to ensure grease penetration to entire journal and needle bearings
- Grease fitting in the cross allows for easy maintenance and the flexible use of the whole assembly
- Snap rings are held to strict tolerances to ensure proper cup position and retention
- Nitrile rubber seals to optimize grease retention and reduce contamination
MOOG Driveline Products – Greaseable Super Strength Universal Joint (Part No.270)
from
$42.99
Product Features:
See More
- BUILT TO LAST – Rugged design specifically engineered for applications with higher torque and horsepower
- COMPREHENSIVE COVERAGE – Available for foreign and domestic nameplates
- CORROSION PROTECTION – Exclusive MICRO SHIELD coating protects against rust and corrosion
- GREASABLE DESIGN – Bearing cups feature a radial design to allow 360 Degrees lubricant distribution to all bearing surfaces
- KEEPS DIRT OUT – Abrasion-resistant nitrile seals provide ideal grease retention and protection from under-vehicle contaminants
- RIGOROUS TESTING – Comprehensive testing throughout design and development processes by MOOG engineers for quality you can count on
- STRONG AND DURABLE – Bearing cups are cold-forged, case-hardened and precision ground while steel cross is forged and carburized heat treated for strength and durability
MOOG Driveline Products – Greaseable Premium Universal Joint (Part No.434)
from
$25.99
Product Features:
See More
- COMPREHENSIVE COVERAGE – Available for foreign and domestic nameplates
- GREASABLE DESIGN – Greasable u-joints allow for new grease to flush out contaminants and moisture
- KEEPS DIRT OUT – Nitrile rubber grease seals use a compressed double lip design for effective protection against contaminants
- RIGOROUS TESTING – Comprehensive testing throughout design and development processes by MOOG engineers for quality you can count on
- STRONG AND DURABLE – Bearing cups are cold-forged, case-hardened and precision ground while steel cross is forged and carburized heat treated for strength and durability
- Cross forging shape and flash provide easier installation and high strength
Dorman – Help – U-Joint Bolt Kit (Part No.81004)
from
$6.99
This universal joint U-bolt kit is designed to match the original components required to repair and resecure universal joints on specified vehicles. Made of quality components, this kit is engineered for reliable performance and durability.
Product Features:
See More
Product Features:
- Direct replacement – this universal joint U-bolt kit is designed to match the original components required to repair and resecure universal joints on specified vehicles
- Ideal solution – this kit is a reliable replacement for original components that are missing or have failed due to fatigue
- Durable construction – this kit is made from quality components to ensure reliable performance and a long service life
- Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience
Neapco – Universal Joint (Part No.2-4801)
Neapco – Universal Joint (Part No.2-4800)
Driveworks – Universal Joint (Part No.DW-270)
from
$15.99
Driveworks Universal Joints are designed to meet or exceed OE fit, form, and function. These universal joints are set to provide superior quality and easy installation. Driveworks Universal Joints are constructed from quality materials for extended durability. Driveworks Universal Joints are pre-lubricated with premium grease to provide a longer service life. The grease fittings are pre-installed to allow for easy maintenance (where applicable).
Product Features:
See More
Product Features:
- The cross is hot forged for the higher torque and horsepower
- The bearing cups are made by cold forging, having higher strength and better rigidity
- Bearing cups allow 360 lubricant distribution to bearing surfaces, and are precision-ground for maximum load-carrying capabilities
- Lubrication grooves are designed to ensure grease penetration to entire journal and needle bearings
- Grease fitting in the cross allows for easy maintenance and the flexible use of the whole assembly
- Snap rings are held to strict tolerances to ensure proper cup position and retention
- Nitrile rubber seals to optimize grease retention and reduce contamination
Brute Force – Universal Joint (Part No.2-4800BF)
Spicer – Universal Joint (Part No.5-1330X)
from
$40.99
You expect a lot from your vehicle, and Spicer Life Series (SPL) universal joints deliver. SPL universal joints consistently outperform competitors, so you can hit the road or trail with confidence. Check out the difference that SPL universal joints can make in your vehicle, and make sure you are getting the longer life, increased bearing capacity and lower maintenance costs that Spicer Life Series (SPL) can provide.
See More
MOOG Driveline Products – Greaseable Super Strength Universal Joint (Part No.265)
from
$30.99
Product Features:
See More
- BUILT TO LAST – Rugged design specifically engineered for applications with higher torque and horsepower
- COMPREHENSIVE COVERAGE – Available for foreign and domestic nameplates
- CORROSION PROTECTION – Exclusive MICRO SHIELD coating protects against rust and corrosion
- GREASABLE DESIGN – Bearing cups feature a radial design to allow 360 Degrees lubricant distribution to all bearing surfaces
- KEEPS DIRT OUT – Abrasion-resistant nitrile seals provide ideal grease retention and protection from under-vehicle contaminants
- RIGOROUS TESTING – Comprehensive testing throughout design and development processes by MOOG engineers for quality you can count on
- STRONG AND DURABLE – Bearing cups are cold-forged, case-hardened and precision ground while steel cross is forged and carburized heat treated for strength and durability
Spicer – Universal Joint, Greaseable 1330-F Spec Series (Part No.5-1204X)
from
$36.99
When you see the Spicer name, you know you are buying the highest quality product available. Spicer universal joints are no exception. Dana manufactures a full line of Spicer universal joints that are engineered to ensure longer life for vehicles in a wide variety of applications, from light vehicle to commercial and off-highway.
Product Features:
See More
Product Features:
- OE engineering and field tested experience is why the Spicer brand is the most trusted in the industry.
- Forged with high-quality steel, these u-joints are heat treated and case-hardened with precision to specific levels, ensuring optimal strength and durability.
- The process of precision grinding the seal and bearing surfaces helps to improve the life of the seal and bearing.
- Zerk allows for lubricating at regular intervals to help extend the life of the part.
Spicer – Universal Joint (Part No.5-7438X)
from
$46.99
You expect a lot from your vehicle, and Spicer Life Series (SPL) universal joints deliver. SPL universal joints consistently outperform competitors, so you can hit the road or trail with confidence. Check out the difference that SPL universal joints can make in your vehicle, and make sure you are getting the longer life, increased bearing capacity and lower maintenance costs that Spicer Life Series (SPL) can provide.
See More
Yukon Gear – 1310 U/Joint With Zerk Fitting On Cross (Part No.42008)
from
$44.99
Yukon 1310 U/Joint with zerk fitting on cross. 3.219″ snap ring span, 1.062″ cap diameter. Outside snap ring.
See More
MOOG Driveline Products – Non-Greaseable Super Strength Universal Joint (Part No.264)
from
$30.99
Product Features:
See More
- BUILT TO LAST – Rugged design specifically engineered for applications with higher torque and horsepower
- COMPREHENSIVE COVERAGE – Available for foreign and domestic nameplates
- CORROSION PROTECTION – Exclusive MICRO SHIELD coating protects against rust and corrosion
- KEEPS DIRT OUT – Abrasion-resistant nitrile seals provide ideal grease retention and protection from under-vehicle contaminants
- RIGOROUS TESTING – Comprehensive testing throughout design and development processes by MOOG engineers for quality you can count on
- STRONG AND DURABLE – Bearing cups are cold-forged, case-hardened and precision ground while steel cross is forged and carburized heat treated for strength and durability
Yukon Gear – 1310 To 1330 Adapter U/Joint (Part No.42005)
from
$59.99
Yukon 1310 to 1330 adapter U/Joint. The 1310 side has a 3.219″ span and 1.062″ caps. The 1330 side has a 3.625″ span and 1.062″ caps. Both sides are outside snap ring.
See More
Yukon Gear – 1310 To Mechanics 3R Adapter U/Joint (Part No.42013)
Yukon Gear – 1350 Lifetime Series U/Joint (Part No.42021)
from
$63.99
Yukon 1350 Lifetime Series U/Joint. 3.625″ snap ring span, 1.188″ cap diameter. Outside snap ring.
See More
Yukon Gear – 1330 Dual-Size Cap U/Joint (Part No.42017)
from
$61.99
Yukon 1330 Dual-size cap U/Joint. 3.625″ snap ring span. One set of caps is 1.125″ in diameter and the other is 1.062″. Outside snap ring.
See More
Most Sold 1987 Ford E-150 Econoline Transfer Cases
Explore our best-selling Ford parts for the 1987 E-150 Econoline among 4 OEM and aftermarket options starting from $11.29.
National – Shaft Repair Sleeve (Part No.99187)
from
$36.49
National has built a reputation as one of the most respected names in the industry. We have offered premium sealing solutions for more than 75 years. Our design team keeps pace with the industry and provides advanced solutions for today’s vehicles.
Product Features:
See More
Product Features:
- Designed to repair damaged, grooved or worn shafts
- Durable stainless steel construction for corrosion-free sealing surface that surpasses most original shaft specifications
- Ideal for a shaft where indications of seal wear, such as tracks or grooves have developed
- Ultra-thin construction (0.01/0.25mm wall thickness) allows original seal size to be used with minimal additional lip loading
- Easy to install with removable flange and installation tool
Driveworks – Taper Bearing Cone (Part No.S-M-88048)
from
$11.29
Value-priced bearing meets all cataloged application requirements.
Product Features:
See More
Product Features:
- Brand may vary by location
FAG US – Repair Sleeve (Part No.SR3501)
from
$62.99
The FAG repair sleeve is a precision element that provides additional sealing for damaged shafts. Made of heat-treated stainless steel, the FAG repair sleeve signifcantly increases the life of the shaft and prevents premature wear. Since no shaft removal or machining is required during the repair, the repair sleeve is a cost effective repair solution to protect damaged surfaces.
Product Features:
See More
Product Features:
- High-precision and High-quality components used in all KITs
- Coverage of classic and new high-tech solutions for the best system coverage
FAG US – Cone (Part No.KL68149)
from
$13.99
Our wheel seals are engineered using only the highest-quality materials to meet vehicle manufacturer specificatons. We work with suppliers to design seals that meet FAG’s quality standards. Seals are designed to protect wheel end components from contamination – such as dirt, dust, and moisture – and prevent the loss of grease over the life of the bearing. The specifications for wheel seals are very demanding, and the type required depends on the specific application, position and vehicle class.
Product Features:
See More
Product Features:
- High-precision and High-quality components used in all KITs
- Coverage of classic and new high-tech solutions for the best system coverage
Top-Rated Drivetrains Brands For Your 1987 Ford E-150 Econoline
Shop for the best-rated brands offering Drivetrains and other products for your 1987 Ford E-150 Econolines. Below you’ll find some of our best rated Drivetrains from National, Dorman, and Motive Gear, and more. Drivetrains from these brands that fit a 1987 E-150 Econoline start at just $3.49 and are rated as high as 4.3 stars. OEM and aftermarket Drivetrains don’t get more top quality, durable, and affordable than from the brands below.
Popular National 1987 Ford E-150 Econoline Drivetrains
When it comes to maintaining or upgrading your 1987 Ford E-150 Econoline, using quality Drivetrains is essential to ensure durability and a perfect fit. National ticks all of those boxes. We offer a wide selection of National Drivetrains, specifically designed for the 1987 Ford E-150 Econoline. With over 3 National brand Drivetrains in stock, you’re sure to find what you need. The prices for these top-notch parts start as low as $7.99, with an average price of just $11.92. Plus, with over 30 customer reviews and an average rating of 4.3 stars, you can trust that our National Drivetrains will get the job done right. Choose Advance Auto Parts for reliability, quality, and expert-approved parts that keep your vehicle running strong.
from
$7.99
(4)
Bearing Race
“Goes with M88010 bearing cup.
Application was the pinion bearing race for a Ford 9 Inch on a 1957 Ford F-100.”
Popular Dorman 1987 Ford E-150 Econoline Drivetrains
Dorman auto parts is one of the highest quality Drivetrain brands in the market. Any 1987 Ford E-150 Econoline owner should feel confident when installing genuine Dorman parts in their vehicle. To ensure the best fit and performance for your 1987 E-150 Econoline, Advance Auto Parts carries a full inventory of 3 Dorman Drivetrains. Plus you will be keeping your Ford in peak condition while saving money because prices on these Dorman Drivetrains range from $3.49 to $22.49, plus, with more than 7 customer reviews and an impressive 4.2 stars average rating, you can be confident the Fram Drivetrains below will deliver on both quality and value.
from
$5.49
(3)
Spindle Nut 3/4 In.-16 and M20 In.-1.0 Hex Size 1-1/16 In. and 27mm
“Fit just like the original.”
from
$22.49
(1)
Driveshaft Flange Bolts
“This item appears to be correct and my review is more of a bashing of AA help desk who apparently does not answer questions as you are lead to believe”
FAQs for 1987 Ford E-150 Econoline Drivetrains
Which Drivetrains are best-sellers for 1987 Ford E-150 Econolines?
Out of 447 Drivetrains that fit 1987 Ford E-150 Econolines, the following parts are the top sellers:
- Axle Housing Cover Gasket Rectangular Shaped, 10 Bolt Hole Gasket (5782406) – $15.99
- Universal Joint (10265720) – $31.99
- Multi-Purpose Seal (3271498) – $11.99
What’s the price range for 1987 Ford E-150 Econoline Drivetrains?
Drivetrain prices for the 1987 Ford E-150 Econoline start at $1.29 and go up to $2,199.99 for the most premium parts.
What’s the average price of a Drivetrain for a 1987 Ford E-150 Econoline?
The average price for Drivetrains for the 1987 Ford E-150 Econoline is $276.64. Keep in mind the variety of part types within our Drivetrain category so you are likely to find a wide range of prices across a variety of parts and components.
Does Advance Auto Parts sell Drivetrains for other Ford E-150 Econoline model years?
What are the cheapest Drivetrains for my 1987 Ford E-150 Econoline?
The cheapest 1987 Ford E-150 Econoline Drivetrains we carry in stock are:
- Differential Ring Gear Bolt (10282257) – $1.29
- Ring Gear Bolt (20520509) – $1.99
- Differential Cross Shaft (10282201) – $2.99
- Differential Crush Sleeve (10282338) – $2.99
- Standard Spindle Nut 3/4 In.-16 Hex Size 1-1/16 In. (21260547) – $3.49
What are the top-rated Drivetrains that fit the 1987 Ford E-150 Econoline?
Out of 5,886 reviews by customers, our 1987 Ford E-150 Econoline Drivetrains have an average customer rating of . These are some of the highest-rated Drivetrain types for the 1987 Ford E-150 Econoline and their top-rated products:
- Spindles
- Standard Spindle Nut 3/4 In.-16 Hex Size 1-1/16 In. (21260547) – $3.49
- Spindle Nut 3/4 In.-16 and M20 In.-1.0 Hex Size 1-1/16 In. and 27mm (21260519) – $5.49
- Universal Joints
- Standard Spindle Nut 3/4 In.-16 Hex Size 1-1/16 In. (21260547) – $3.49
- Spindle Nut 3/4 In.-16 and M20 In.-1.0 Hex Size 1-1/16 In. and 27mm (21260519) – $5.49
- Differentials
- Standard Spindle Nut 3/4 In.-16 Hex Size 1-1/16 In. (21260547) – $3.49
- Spindle Nut 3/4 In.-16 and M20 In.-1.0 Hex Size 1-1/16 In. and 27mm (21260519) – $5.49
What types of Drivetrains do you sell for my 1987 Ford E-150 Econoline?
As of 11/2/25, these are some of the most in-demand types of Drivetrains for a 1987 Ford E-150 Econoline:
Can I get help with 1987 Ford E-150 Econoline Drivetrain orders?
Contact our customer support team, by chat or phone, through the help desk page, where you can find instant answers about Ford Drivetrains and more.
What is your return policy for Ford E-150 Econoline Drivetrains?
Advance Auto Parts keeps returns simple. For new Ford E-150 Econoline Drivetrains and accessories, your online orders can be returned, in their original condition, within 45 days. For requirements, see the returns page.
