1987 Chevrolet El Camino Differentials

“Standard Open side gear thrust washer for 7.5″” Ford.”

Richmond Gear is the leading manufacturer of professional quality, high-performance drivetrain products. Our complete line of products ranges from high performance ring-and-pinion sets for serious street and racing applications to torque-hungry manual transmissions and components. Richmond Gear products have been winners both at the Daytona 500 and U.S. Nationals for decades. WINNERS RUN RICHMOND.

Pro-King is the leading supplier of transmission and driveline products in the aftermarket.

Locking Hub Conversion Kit for ’00-’08 Dodge D60 & 9.25 front, dual rear wheel design. The Yukon worry free Spin Free Kit replaces the vulnerable and expensive factory unit bearings with tapered bearings and races. The result is not only a design which is easier and more economical to service, but one that offers significant increases in mileage per gallon. This hub kit also includes low-profile Yukon Hardcore premium locking hubs, giving you more driving select ability. This kit includes new wheel hubs, spindles, high strength Yukon 4340 Chrome-Moly outer axles, Yukon Hardcore premium locking hubs, Timken bearings, high quality seals and all hardware for installation.

Choosing an automatic transmission fluid just got easier. Valvoline Full Synthetic MaxLife Multi-Vehicle ATF, the #1 ATF product, is suitable for use in 95% of ATF vehicles in operation with US registered light duty applications. And now, it€™s also recommended for most belt and chain-driven continuously variable transmissions (CVT). Featuring advanced additives to prevent the major causes of transmission breakdown, it€™s designed to help prevent leaks, reduce wear and tear, and maximize performance €“ all for much longer than conventional fluids. It has improved thermal stability for longer fluid life, better viscosity stability for consistent transmission operation, and frictional enhancements for smooth gear engagements. Whether your vehicle has a CVT or traditional automatic, Valvoline MaxLife Multi-Vehicle ATF is suitable for a broad range of transmissions including Ford, GM, Toyota, Honda, Nissan, Hyundai, Subaru, BMW, Mercedes, Volvo, VW and Audi vehicles. It€™s specifically recommended for use in the following applications: GM DEXRON-II, DEXRON-III, DEXRON-VI, and DEX-CVT; Ford MERCON LV; Toyota/Lexus Type T, T-II, T-IV, WS, CVTF FE, and CVTF TC. For the many miles ahead, trust your transmission with Valvoline, the #1 automatic transmission fluid brand.

Fel-Pro® gaskets are specifically designed for the repair environment to deliver a reliable seal on even the most troublesome applications. Designed for imperfect sealing surfaces and manufactured with proprietary materials, you can count on Fel-Pro for innovative sealing solutions for the real-world repair environment.

The Yukon Dura Grip provides aggressive yet smooth traction to give you the confidence & performance you need. Get longer life and better traction with the heavy duty Yukon Dura Grip Positraction. The Yukon Dura Grip uses a nodular case and forged 4320 internals for added strength along with composite clutches for high performance and long life. All units are Rebuildable and many offer upgrades to increase aggressiveness for racing applications. Each unit carries a one year warranty against defects. This unit has larger bearing journals for added strength & uses heavy-duty carrier bearings & races.

Pro-King is the leading supplier of transmission and driveline products in the aftermarket.

Richmond Gear is the leading manufacturer of professional quality, high-performance drivetrain products. Our complete line of products ranges from high performance ring-and-pinion sets for serious street and racing applications to torque-hungry manual transmissions and components. Richmond Gear products have been winners both at the Daytona 500 and U.S. Nationals for decades. WINNERS RUN RICHMOND.

Yukon Gear and Axle manufactures a complete line of general replacement and performance series of pinion yokes for many street, racing, and heavy-duty off-road applications.

Yukon Gear & Axle manufactures a full line of top quality small parts to complete any job including ring gear bolts, crush sleeves, pinion nuts and washers, axle studs, thrust washers and much, much more. For all your differential small parts needs, look no further than Yukon.

Yukon Gear & Axle offers a full line of top quality differential tools to save time and money.

Yukon Gear & Axle manufactures a full line of top quality small parts to complete any job including ring gear bolts, crush sleeves, pinion nuts and washers, axle studs, thrust washers and much, much more. For all your differential small parts needs, look no further than Yukon.

Yukon Gear & Axle manufactures a full line of top quality small parts to complete any job including ring gear bolts, crush sleeves, pinion nuts and washers, axle studs, thrust washers and much, much more. For all your differential small parts needs, look no further than Yukon.

Motive Gear Differential Ring and Pinion, GM10-342A.

USA Standard Master Overhaul kits let you finish your install with confidence. This kit uses Koyo bearings and races. Included are carrier bearings and races, pinion bearings and races, pinion seal, complete shim kit, ring gear bolts, pinion nut, crush sleeve (if applicable), oil baffles and slingers (if applicable), threading locking compound, marking compound with brush and gasket.

“5/16″”-18 cover bolt, Dana Spicer 25, 27, 30 and 44, AMC Model 20 and Model 35, Chrysler 9.25 rear, GM 7.5″”, 7.625″”, 8.2″”, 8.5″”, 12 bolt passenger car and truck.”

Yukon Gear & Axle clutch kits fit popular GM diffs outfitted with a Yukon Dura Grip positraction unit feature 14 advanced carbon clutch plates, ensuring total traction and long-lasting performance.

The tremendous shock loads generated at launch by most any drag racing vehicle equipped with todays sticky tire compounds or the acceleration and deceleration of oval track cars put considerable strain on the ring gear. For this reason, the fastener experts at ARP have developed the Pro Series ring gear bolts. They are forged from premium grade 8740 chrome moly steel and are heat treated to a nominal rating of 200,000 PSI tensile strength. Specially hardened, precision ground washers are included where required. Available to fit most any ring gear setup ranging from popular 9 Inch Ford GM 10 and 12 bolt rear ends to the beefy strange differentials found in top fuel and funny car applications.

Pro-King is the leading supplier of transmission and driveline products in the aftermarket.

Yukon Gear & Axle offers a full line of top quality differential tools to save time and money.

Our engineers designed the line of Hi-Tek differential covers to not only look good but address a number of weaknesses of the factory stamped steel covers. First, they started by constructing the covers of thick A356.0-T6 aluminum, which dissipates heat much faster than the factory steel unit keeping the fluid temperature lower under high-stress loads vs. a steel cover. Then for added durability, we added a reinforced center bar for extra strength along with load bolts to help prevent bearing cap deflection under severe loads. The internal shape of the cover retains the smooth round back internally to help keep the fluid flow going over the ring gear to properly lubricate the gears and bearings. Additional features include a magnetic drain plug for catching ferrous metal particles, machined B&M logo and all necessary hardware and easy to follow detailed instructions for a quick and simple installation you can do at home. Note: Gasket not included.

Pro-King is the leading supplier of transmission and driveline products in the aftermarket.

“GM 7.5″” & 7.6″” DURA GRIP case, bare, 3.23 & up, 26spline & 28spline.”

Yukon Gear & Axle manufactures a full line of top quality small parts to complete any job including ring gear bolts, crush sleeves, pinion nuts and washers, axle studs, thrust washers and much, much more. For all your differential small parts needs, look no further than Yukon.

Yukon Mini Spools are a low-cost traction option for vehicles looking for full-time lockup. The mini spool installs into a standard open carrier in place of the spider gears and delivers 100% power to both tires at all times. These units are not recommended for street-driven vehicles. Full spools are recommended for vehicles with large tires or high horsepower.

This axle shaft is designed to match the performance of the original equipment shaft on specified vehicle makes, models and years. When a factory axle shaft fails or is damaged by rust or collision, this replacement is engineered to help restore and ensure the proper transfer of torque and rotational power from the differential or transmission to the wheel.

Manufactured with premium-grade steel, National taper bearing cups feature crowned raceways to ensure even load distribution.