1987 Chevrolet Camaro Differentials

Essential 1987 Chevrolet Camaro Differentials

Spectre – Differential Cover (Part No.60879)

Differential Cover

from

$189.99
Spectre’s Polished Aluminum Differential Covers feature a finned design and 10 bolt assembly for optimum fit and function. Includes 10 SAE standard bolts for installation. You’ll need to supply your own bolts if your vehicle uses metric bolts. Manufactured using high quality materials this product was designed to perform as well as they look.

Product Features:
  • Polished aluminum
  • 10 bolt cover with finned design
  • Gasket included
  • 10 gold Iridite 3/8 inch -18 x 3/4 inch differential cover bolts included
See More

Yukon Gear – Posi Spring Kit For GM 7.5", With Preload Plates (Part No.33206)

Posi Spring Kit For GM 7.5", With Preload Plates

from

$153.99
Product Features:
  • Positraction spring kit
  • Fits GM 7.5″ and 7.625″ Dura Grip
  • Includes preload plates
See More

Yukon Gear – Pinion Install Kit For GM 8.2" Differential (Part No.13066)

Pinion Install Kit For GM 8.2" Differential

from

$259.99
Yukon Pinion installation kits are a terrific solution for gear installation on lower mileage vehicles where the carrier bearings & races can be reused. This kit uses Timken bearings and races along with a high quality pinion seal and small parts. Included in this kit are the pinion bearings and races, pilot bearing (if applicable), crush sleeve (if applicable), complete pinion shim kit, thread locker, and marking compound with brush. Yukon does extensive research for each application to make sure your kit will arrive with all the correct parts you need to install your pinion gear.

Product Features:
  • Fits GM 8.2″
  • Included are pinion bearings and races, pinion seal, crush sleeve, complete pinion shim kit, and marking compound with brush.
See More

Motive Gear – Axle Shaft (Part No.MG1021)

Axle Shaft

from

$156.99
The Motive Gear replacement axle shaft offers an OE-quality axle shaft at a fraction of the OE cost. Manufactured from 1541H material on high-tolerance CNC equipment, this axle shaft is designed to provide a perfect fit every time.

Product Features:
  • AXLE SHAFT ’93-96 CAMARO 7 5/8″ 32″ L&R,28 SPL
See More

Yukon Gear – Dura Grip Positraction For GM 7.5" & 7.625" With 26 Spline Axles, 3.23 & Up (Part No.26017)

Dura Grip Positraction For GM 7.5" & 7.625" With 26 Spline Axles, 3.23 & Up

from

$889.99
The Yukon Dura Grip provides aggressive yet smooth traction to give you the confidence & performance you need. Get longer life and better traction with the heavy duty Yukon Dura Grip Positraction. The Yukon Dura Grip uses a nodular case and forged 4320 internals for added strength along with composite clutches for high performance and long life. All units are Rebuildable and many offer upgrades to increase aggressiveness for racing applications. Each unit carries a one year warranty against defects.

Product Features:
  • Fits GM 7.5″ and 7.625″ with 26 spline axles
  • 3.23 ratio and up only
  • 4-spring, clutch style positraction
  • Internal gears are manufactured using forged 4320 steel and cut to provide stronger teeth
  • Fully rebuildable
  • Assembled in the USA
See More

USA Standard Gear – Ring & Pinion Gear Set For GM 8.5" In A 5.13 Ratio (Part No.36220)

Ring & Pinion Gear Set For GM 8.5" In A 5.13 Ratio

from

$274.99
USA Standard ring & pinion sets are the right choice to add confidence to your install. USA Standard Gear offers a full line of ring & pinion sets for a variety of common & hard to find applications. USA standard gear offers a standard one year warranty against defects on their ring & pinion sets.

Product Features:
  • Fits GM 8.5″ and 8.6″
  • 8.50″ ring gear diameter
  • 30 spline pinion
  • 10 ring gear bolts
  • 5.13 ratio
See More

Yukon Gear – Standard Open Carrier Case, GM 8.5", 2.73 & Up (Part No.20083)

Standard Open Carrier Case, GM 8.5", 2.73 & Up

from

$239.99
8.5″ GM standard Open case, 2.73 & up, 28 or 30 spline.

Product Features:
  • Standard open carrier case
  • Fits GM 8.5″ with 28 or 30 spline axles
  • 2.73 and up ratio only
  • Does not include spider gears
See More

Yukon Gear – Differential (Part No.26014)

Differential

from

$889.99
Differential

National – Bearings (Part No.25520)

Bearings

from

$8.99
National Oil Seals & Bearings offer a full line of premium oil seals and bearings.

Product Features:
  • Premium bearing design matches OEM specifications
  • Precision manufactured using premium-grade steel for outstanding durability and performance
  • Crowned raceways and rollers to ensure even load distribution for maximum life
  • Industry leading coverage
  • Professional technicians know they can depend on National
See More

Richmond Gear – Differential Cross Shaft (Part No.CSPGM75)

Differential Cross Shaft

from

$26.49
Richmond Gear is the leading manufacturer of professional quality, high-performance drivetrain products. Our complete line of products ranges from high performance ring-and-pinion sets for serious street and racing applications to torque-hungry manual transmissions and components. Richmond Gear products have been winners both at the Daytona 500 and U.S. Nationals for decades. WINNERS RUN RICHMOND!

Product Features:
  • For over 80-years, the Richmond Double-Diamond logo has represented some of the highest quality gears in the racing industry. Winners Run Richmond!
  • The superior quality of Richmond gearsets is a result of outstanding design, world class manufacturing and an extensive testing process that is performed on all products.
  • Richmond performance gearsets have been winners for decades at: NHRA, NMRA, NMCA, Daytona 500, WISSOTA and U.S. Nationals.
  • Richmond Gear is a leading manufacturer of high performance ring and pinion gearsets and drivetrain components, backed by a two year warranty.
  • Engineered to perform faster and be more reliable, Richmond performance drivetrain products are the result of a continuous research and development program combined with state-of-the-art manufacturing capabilities.
See More

Motive Gear – Differential Carrier Shim Kit (Part No.1101)

Differential Carrier Shim Kit

from

$8.49
High-quality Differential Carrier Shim Kit

Product Features:
  • CARRIER SHIMS 12 BOLT GM CAR & TRUCK ALSO GM8.6″ 99-ON
See More

Yukon Gear – Dana 25, 27, 30, 44, Model 20 And Model 35, GM 7.5", 8.2", 8.5", 12P, 12T, C9.25 Rear Cover Bolt (Part No.33286)

Dana 25, 27, 30, 44, Model 20 And Model 35, GM 7.5", 8.2", 8.5", 12P, 12T, C9.25 Rear Cover Bolt

from

$9.99
5/16″-18 cover bolt, Dana Spicer 25, 27, 30 and 44, AMC Model 20 and Model 35, Chrysler 9.25 rear, GM 7.5″, 7.625″, 8.2″, 8.5″, 12 bolt passenger car and truck.

Product Features:
  • Cover bolt for Dana Spicer 25, 27, 30 and 44, AMC Model 20 and Model 35, GM 7.5″, 7.625″, 8.2″, 8.5″ and 12 bolt passenger car and truck.
  • 1/2″ head
See More

Motive Gear – Differential Pinion Shim Kit (Part No.1100)

Differential Pinion Shim Kit

from

$7.49
High-quality Differential Component Shim

Product Features:
  • SHIM KIT FITS-8.25-F7.5-AMC20-GM0
See More

Yukon Gear – Redline Synthetic "Shock Proof" Oil With Positraction Additive – 4 Quarts (Part No.15005)

Redline Synthetic "Shock Proof" Oil With Positraction Additive - 4 Quarts

from

$148.99
Redline Synthetic “Shock Proof” Oil with positraction Additive. 4 Quarts.

Product Features:
  • Includes four quarts of Redline Shockproof oil and one 4oz bottle of Yukon positraction additive
See More

Yukon Gear – Bearing Race Driver (Part No.56017)

Bearing Race Driver

from

$215.99
Bearing race driver. No return.

Product Features:
  • Bearing race driver
  • Fits HM89410 race
  • All steel construction
See More

National – Bearings (Part No.M86610)

Bearings

from

$9.49
National Oil Seals & Bearings offer a full line of premium oil seals and bearings.

Product Features:
  • Premium bearing design matches OEM specifications
  • Precision manufactured using premium-grade steel for outstanding durability and performance
  • Crowned raceways and rollers to ensure even load distribution for maximum life
  • Industry leading coverage
  • Professional technicians know they can depend on National
See More

Yukon Gear – Clutch Guide For GM 7.5" & 7.6" Dura Grip (Part No.33251)

Clutch Guide For GM 7.5" & 7.6" Dura Grip

from

$10.99
Product Features:
  • Clutch guide
  • Fits GM 7.5″ and 7.625″ Dura Grip
See More

USA Standard Gear – Standard Spider Gear Set For GM 7.5", 26 Spline (Part No.39023)

Standard Spider Gear Set For GM 7.5", 26 Spline

from

$156.99
Product Features:
  • Spider gear kit
  • Fits GM 7.5″ 26 spline open differential
  • Includes two side gears, two pinion gears, cross pin shaft, cross pin bolt and spider gear thrust washers.
See More

Richmond Gear – RngPnnInstlKt (Part No.83-1022-B)

RngPnnInstlKt

from

$43.99
RngPnnInstlKt

Yukon Gear – Replacement Carrier Shim Kit For Dana Spicer 44, 30 Spline Axles (Part No.55010)

Replacement Carrier Shim Kit For Dana Spicer 44, 30 Spline Axles

from

$15.99
Product Features:
  • Carrier shim kit for Dana Spicer 30 with 30 spline axles
See More

National – Shaft Repair Sleeve (Part No.99152)

Shaft Repair Sleeve

from

$38.99
National® has built a reputation as one of the most respected names in the industry. We have offered premium sealing solutions for more than 75 years. Our design team keeps pace with the industry and provides advanced solutions for today’s vehicles.

Product Features:
  • Designed to repair damaged, grooved or worn shafts
  • Durable stainless steel construction for corrosion-free sealing surface that surpasses most original shaft specifications
  • Ideal for a shaft where indications of seal wear, such as tracks or grooves have developed
  • Ultra-thin construction (0.01/0.25mm wall thickness) allows original seal size to be used with minimal additional lip loading
  • Easy to install with removable flange and installation tool
  • Installation tool reduces sleeve distortion and allows for installation without removal from the shaft
See More

Yukon Gear – Posi Shim Kit For GM 7.5" & 7.625" Eaton Positraction (Part No.16047)

Posi Shim Kit For GM 7.5" & 7.625" Eaton Positraction

from

$42.99
Product Features:
  • Shim kit
  • Fits GM 7.5″ and 7.625″ with Eaton positraction
See More

ACDelco – Differential Bearing (Part No.J7060723477ACD)

Differential Bearing

from

$88.94
Differential Bearing

Yukon Gear – Cast Yoke For GM 8.5" With A 1350 U/Joint Size (Part No.41092)

Cast Yoke For GM 8.5" With A 1350 U/Joint Size

from

$234.99
Yukon cast yoke for GM 8.5″ with a 1350 U/joint size. 3.625″ snap ring span, 1.188″ cap diameter. Outside snap ring. This yoke uses straps. All Yukon yokes come with a one year warranty against manufacturing defects.

Product Features:
  • Fits GM 8.5″
  • 30 spline
  • 1350 u-joint size
  • Outside snap ring design
  • 3.625″ snap ring span
  • 1.188″ cap diameter
  • Strap style
See More

Pro-King – Differential Ring Gear Bolt (Part No.742E935)

Differential Ring Gear Bolt

from

$1.49
Pro-King is the leading supplier of transmission and driveline products in the aftermarket.

Product Features:
  • All products are designed to meet or exceed OE quality, form, fit and funtion.
See More

Yukon Gear – Pinion Nut (Part No.33152)

Pinion Nut

from

$9.99
Pinion nut for GM 7.2″ IFS, 7.5″, 7.6″, 7.6″ IFS, 8.0″, 8.25″, 8.5″, 8.6″, 9.25″ IFS, 9.5″ & Oldsmobile Dropouts. 1 1/4″ socket, 7/8″ x 14 thread.

Product Features:
  • Pinion nut for GM 7.2″, 7.5″, 7.625″, 8.0″, 8.25″ IFS, 8.5″, 8.6″, 9.25″ IFS and 9.5″
  • 7/8″ x 14 thread
  • 1 1/4″ socket
See More

Yukon Gear – Minor Install Kit For GM Early And Late 7.5" Differential (Part No.12050)

Minor Install Kit For GM Early And Late 7.5" Differential

from

$115.99
Yukon Minimum installation kits are a low cost solution for gear changes in newer vehicles where the bearings can be reused. This kit uses all high quality components to ensure a smooth set up. kit includes a pinion seal, crush sleeve (if applicable), complete shim kit, marking compound and brush.

Product Features:
  • Fits GM 7.5″ and 7.625″
  • Included are a pinion seal, crush sleeve, complete shim kit, marking compound and brush.
See More

USA Standard Gear – Master Overhaul Kit For ’10 & Up Camaro With V8 (Part No.37103)

Master Overhaul Kit For '10 & Up Camaro With V8

from

$584.99
USA Standard Master Overhaul kits let you finish your install with confidence. This kit uses Koyo bearings and races. Included are carrier bearings and races, pinion bearings and races, pinion seal, complete shim kit, ring gear bolts, pinion nut, crush sleeve (if applicable), oil baffles and slingers (if applicable), threading locking compound, marking compound with brush and gasket.

Product Features:
  • Fits GM 8.6″ IRS Camaro
  • Uses Koyo bearings and races
  • Included are carrier bearings and races, pinion bearings and races, pinion seal, complete shim kit, ring gear bolts, pinion nut, crush sleeve, thread locker, marking compound with brush and gasket.
See More

1987 Chevrolet Camaro Differentials

Maybe you’re in the middle of a full rebuild of that 1987 Chevrolet Camaro. Maybe you just need a couple of Differentials. Either way, Advance Auto Parts has 166 different Differentials in our inventory ranging from $1.99 to $1,704.99. That means you can find the exact parts or products you need to keep that 1987 Chevrolet Camaro running smoothly.

Differentials are only as good as their brand. We stock 13 different brands to make sure you have plenty of trusted parts to choose from for your 1987 Chevrolet Camaro. Valvoline, FELPRO, and Dorman are just some of the brands we stock. Search for brands you know or compare prices and reviews to help you decide!

We know you’ll find the perfect Differentials for your 1987 Chevrolet Camaro, but don’t take our word for it – read our customer ratings and reviews and buy with confidence. Out of the 472 reviews in this category, some of the top rated parts include Wheel Bearing and Seal Kit with 5.0 stars and Differential Master Bearing Kit – Koyo with 5.0 stars.

So if you’re in the market for aftermarket Differentials to keep your 1987 Chevrolet Camaro rolling for years to come, look no further. Shop online and have your products shipped direct to your door, or pick up at the nearest Advance Auto Parts location today!

Differentials Brands To Make Your 1987 Chevrolet Camaro Last

Simple repair, complete replacement, or a full rebuild. No matter the job, your 1987 Chevrolet Camaro demands trusted brand parts and products to keep it running. Many trusted brands of Differentials make up Advance Auto Parts’ inventory, and all are ready to help make your Camaro the best it can be. Be sure to browse some of our top Differentials brands and parts.

Popular Felpro Differentials

We carry Felpro parts in our stock across Rear Differential Cover Gaskets categories, plus more. For a 1987 Chevrolet Camaro, our most popular Felpro Differentials include:
DIFFERENTIAL GASKET
from $7.99
(45)
DIFFERENTIAL GASKET
Rear Differential Cover Gaskets

Top 1987 Chevrolet Camaro Differentials from Dorman

Dorman products are another trusted brand when it comes to Differentials for your 1987 Chevrolet Camaro. Popular Dorman parts include:
Rear Differential Cover
from $20.99
(38)
Rear Differential Cover
Differential Covers
Differential Shaft Lock Bolt
from $5.99
(11)
Differential Shaft Lock Bolt
Differential Pinion Shaft Lock Bolts

FAQs for 1987 Chevrolet Camaro Differentials

What are the most purchased Differentials for the 1987 Chevrolet Camaro?

Out of 166 Differentials for the 1987 Chevrolet Camaro, the most popular in our inventory are:
DEX/MERC Automatic Transmission Fluid, 1 Gallon
from $35.99
(17)
DEX/MERC Automatic Transmission Fluid, 1 Gallon
Differential Oil
3 Qt - 80W90 Conventional Gear Oil With Posi Additive
from $57.99
This product is not rated
3 Qt – 80W90 Conventional Gear Oil With Posi Additive
Differential Oil

What are the top-rated 1987 Chevrolet Camaro Differentials?

Top-rated Differentials for your 1987 Chevrolet Camaro based on customer reviews/ratings are:
Wheel Bearing and Seal Kit
from $151.99
(2)
Wheel Bearing and Seal Kit
“All you need to overhaul a diff, at a good price”
Differential Master Bearing Kit - Koyo
from $124.99
(1)
Differential Master Bearing Kit – Koyo
“Worked perfect for my application”
Differential Bearing Kit - Timken
from $99.99
(1)
Differential Bearing Kit – Timken
“I needed these parts for a ring & pinion assembly that was already dissasembled. It would have been nice to have an installation diagram, bolt torque ”