1986 Subaru GL Transmission Parts
More 1986 Subaru GL Transmission Parts Categories
If you’re looking for an original Transmission Parts replacement for a 1986 Subaru GL, you can search through our selection below. You’ll also find aftermarket and OEM Transmission Parts to meet your needs.
Essential 1986 Subaru GL Transmission Parts
ACDelco – Multi-Purpose Wire Connector with Leads (Part No.PT2164)
from
$16.79
ACDelco Professional Air Charge Temperature Sensor Connector is a high quality aftermarket replacement component for one or more of the following vehicle systems: ignition, starting and charging, body-electrical and lighting, and/or engine fuel management. This premium aftermarket connector is manufactured to meet or exceed your expectations for fit, form, and function.
Product Features:
See More
Product Features:
- Professional, premium aftermarket replacement
- Provides the performance and dependability you expect from ACDelco
- Manufactured to meet expectations for fit, form, and function
Sankei Switches – Sankei Switches Radiator Cap (Part No.G1010121551SAK)
from
$12.25
The Sankei Switches radiator cap range has been developed to operate within original equipment manufacturer’s specifications. A faulty radiator cap can cause your car to boil-over at a lower temperature. Test or replace the coolant cap when servicing the cooling system.
Product Features:
See More
Product Features:
- Meets Original Equipment specifications.
- Made from premium materials.
- Designed to function on open cooling systems and overflow reservoir type systems.
Driveworks – Manual Transmission Main Shaft Seal (Part No.S-710324)
National – Multi Purpose Seal (Part No.710324)
from
$13.29
National has built a reputation as one of the most respected names in the industry. We have offered premium sealing solutions for more than 75 years. Our design team keeps pace with the industry and provides advanced solutions for today’s vehicles.
Product Features:
See More
Product Features:
- Low swell in hydrocarbon fluids
- Design type: spring loaded; multi-lip
- Provides good low temperature capability
- Temperature range: -40°F to 225°F; -40°C to 107°C
- Delivers quality and reliable performance for every type of repair
National – Multi Purpose Seal (Part No.225010)
from
$12.99
National has built a reputation as one of the most respected names in the industry. We have offered premium sealing solutions for more than 75 years. Our design team keeps pace with the industry and provides advanced solutions for today’s vehicles.
Product Features:
See More
Product Features:
- Low swell in hydrocarbon fluids
- Design type: spring loaded; multi-lip
- Provides good low temperature capability
- Temperature range: -40°F to 225°F; -40°C to 107°C
- Delivers quality and reliable performance for every type of repair
National – Multi Purpose Seal (Part No.221820)
from
$8.29
National has built a reputation as one of the most respected names in the industry. We have offered premium sealing solutions for more than 75 years. Our design team keeps pace with the industry and provides advanced solutions for today’s vehicles.
Product Features:
See More
Product Features:
- Low swell in hydrocarbon fluids
- Design type: spring loaded; multi-lip
- Provides good low temperature capability
- Temperature range: -40°F to 225°F; -40°C to 107°C
- Delivers quality and reliable performance for every type of repair
Permatex – High-Torque, High-Vibration RTV Silicone Gasket Maker, 13 OZ (Part No.82195)
from
$26.99
Permatex Ultra Grey is specified for high torque and high vibration applications. Ultra Grey offers a sensor-safe, low odor, non-corrosive formula and is OEM specified to fit dealership warranty requirements. This high performance gasket maker meets performance specs of OE silicone gaskets and can be used on high torque and vibration applications such as valve covers, water pump, intake manifold end seals ad thermostat housings.
Product Features:
See More
Product Features:
- High torque and rigidity
- Sensor-safe, non-corrosive formula
- OEM specified
- Low-odor, non-corrosive formula
- Ideal for closed spaced bolt patterns
Driveworks – Taper Bearing Set (Part No.S-30208)
from
$17.99
Value-priced bearing meets all cataloged application requirements.
Product Features:
See More
Product Features:
- Brand may vary by location
Original Equipment – MT Drain Plug Gasket (Part No.J1147946177OEA)
from
$2.28
MT Drain Plug Gasket
Nippon Reinz – Oil Drain Plug Gaske (Part No.A612028860NRZ)
from
$1.85
Oil Drain Plug Gaske
Permatex – The Right Stuff: Grey, 90 Minute Gasket Maker, 3 OZ (Part No.34328)
from
$17.49
Permatex’s The Right Stuff 90 Minute Series offers the fastest return to service in a in just 90 minute! This leak-proof, elastomeric “Formed-in-place” material is more reliable and longer lasting than pre-cut gaskets. It is blowout resistant and protects against leaks and seepage caused by vibration and thermal expansion. The Right Stuff 90 Minute Grey is specified for high torque and high vibration applications and is formulated to meet or exceed performance standards for long-term sealability, durability and handling.
Product Features:
See More
Product Features:
- Designed to perform under higher torque loads associated with engines having closely spaced bolt patterns
- Sensor-safe, non-corrosive, RTV silicone
- Protects against leaks caused by vibration and thermal expansion
- Meets performance specs of OE silicone gaskets
- Quickly returns vehicle to service in just 90 minutes
Ishino – Automatic Transmission Pan Gasket (Part No.J504031695ISH)
from
$8.46
Automatic Transmission Pan Gasket
Pro-King – Automatic Transmission Vacuum Modulator (Part No.MD-30)
from
$24.99
Fully adjustable vacuum modulator to maintain accurate shift points.
Product Features:
See More
Product Features:
- Meets or exceeds OE fit, form and function
Carquest Premium – Automatic Transmission Modulator Valve (Part No.VMA1002)
from
$49.99
CARQUEST premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.
See More
National – Bearings (Part No.30208)
from
$29.99
National Oil Seals & Bearings offer a full line of premium oil seals and bearings.
Product Features:
See More
Product Features:
- Premium bearing design matches OEM specifications
- Precision manufactured using premium-grade steel for outstanding durability and performance
- Matched cup and cone components ensures consistent quality and outstanding performance
- Industry leading coverage
- Professional technicians know they can depend on National
National – Multi Purpose Seal (Part No.223830)
from
$11.99
National has built a reputation as one of the most respected names in the industry. We have offered premium sealing solutions for more than 75 years. Our design team keeps pace with the industry and provides advanced solutions for today’s vehicles.
Product Features:
See More
Product Features:
- Low swell in hydrocarbon fluids
- Design type: spring loaded; multi-lip
- Provides good low temperature capability
- Temperature range: -40°F to 225°F; -40°C to 107°C
- Delivers quality and reliable performance for every type of repair
National – Multi Purpose Seal (Part No.223051)
from
$4.29
National has built a reputation as one of the most respected names in the industry. We have offered premium sealing solutions for more than 75 years. Our design team keeps pace with the industry and provides advanced solutions for today’s vehicles.
Product Features:
See More
Product Features:
- Low swell in hydrocarbon fluids
- Design type: spring loaded; multi-lip
- Provides good low temperature capability
- Temperature range: -40°F to 225°F; -40°C to 107°C
- Delivers quality and reliable performance for every type of repair
National – Shaft Repair Sleeve (Part No.99169)
from
$24.99
National® has built a reputation as one of the most respected names in the industry. We have offered premium sealing solutions for more than 75 years. Our design team keeps pace with the industry and provides advanced solutions for today’s vehicles.
Product Features:
See More
Product Features:
- Designed to repair damaged, grooved or worn shafts
- Durable stainless steel construction for corrosion-free sealing surface that surpasses most original shaft specifications
- Ideal for a shaft where indications of seal wear, such as tracks or grooves have developed
- Ultra-thin construction (0.01/0.25mm wall thickness) allows original seal size to be used with minimal additional lip loading
- Easy to install with removable flange and installation tool
- Installation tool reduces sleeve distortion and allows for installation without removal from the shaft
National – Multi Purpose Seal (Part No.2025)
from
$11.99
National has built a reputation as one of the most respected names in the industry. We have offered premium sealing solutions for more than 75 years. Our design team keeps pace with the industry and provides advanced solutions for today’s vehicles.
Product Features:
See More
Product Features:
- Low swell in hydrocarbon fluids
- Design type: spring loaded; multi-lip
- Provides good low temperature capability
- Temperature range: -40°F to 225°F; -40°C to 107°C
- Delivers quality and reliable performance for every type of repair
Imperial – Econo-Kool® Transmission Oil Cooler (Part No.242010)
from
$54.99
Product Features:
See More
- Imperial Econo-Kool« tube and fin transmission cooler
- Size: 3/4″ x 5″ x 15-7/8″
- Compact and mid-size cars
- GVWR up to 16,000 lbs.; towing up to 2,500 lbs.
- Compatible with OEM cooler systems
- Ultrasonically soldered for reliability
- 100% pressure testing to 150 PSI for quality assurance
- High efficiency turbulators
Imperial – High Performance Transmission Oil Cooler (Part No.240516)
from
$85.99
Product Features:
See More
- Imperial high-performance transmission cooler
- Size: 3/4″ x 10″ x 15-7/8″
- SAE 45-degree fittings for maximum reliability
- Electrostatic powder-coated to prevent corrosion
- SAE 45 degree fittings for maximum reliability
- Electrostatically powder coated to prevent corrosion
- All aluminum lightweight construction
Imperial – High Performance Transmission Oil Cooler (Part No.240512)
from
$67.99
Product Features:
See More
- Imperial high-performance transmission cooler
- Size: 3/4″ x 7-1/2″ x 12-1/2″
- SAE 45-degree fittings for maximum reliability
- Electrostatic powder-coated to prevent corrosion
- SAE 45 degree fittings for maximum reliability
- Electrostatically powder coated to prevent corrosion
- All aluminum lightweight construction
Anchor – Transmission Mount: Rear, 1 Piece (Part No.9556)
from
$94.99
The purpose of the mount is to support the engine and transmission on the chassis and dampen vibration and noise from reverberating to the rest of the vehicle. Engine and Transmission Mounts are engineered and manufactured to meet or exceed OEM specifications using the latest CAD/CAM engineering process to ensure superior quality, form, fit and function. Only premium quality materials are used in the manufacturing process to guarantee precise performance and maximum durability. Applicable to SUBA 85-91;. Please verify your application.
Product Features:
See More
Product Features:
- MAXIMUM LIFE & PERFORMANCE: Both natural and SBR (Styrene Butadiene) rubber provide good abrasion resistance and aging stability to ensure maximum life and performance.
- MEETS OR EXCEEDS DUROMETER MEASUREMENTS: All rubber material is manufactured to specific Durometer (hardness) measurements based on the vehicle’s application requirements.
- HARDENED STEEL FASTENERS: All fasteners are made of hardened steel with heat treated Grade #5 bolts.
- SUPERIOR BOND: A special Chemlock® bonding agent is used to ensure a superior rubber-to-metal bond.
- HYDRAULIC MOUNT DESIGN: Hydraulic Mounts (applicable where OE) are designed for most front wheel drive vehicles because transverse drive train mounting.
- For Years: 1985-1991
- Weight approx: 2 Lbs
Anchor – Transmission Mount: Left, Right, 1 Piece (Part No.8640)
from
$56.99
The purpose of the mount is to support the engine and transmission on the chassis and dampen vibration and noise from reverberating to the rest of the vehicle. Engine and Transmission Mounts are engineered and manufactured to meet or exceed OEM specifications using the latest CAD/CAM engineering process to ensure superior quality, form, fit and function. Only premium quality materials are used in the manufacturing process to guarantee precise performance and maximum durability. Applicable to SUBA 85-94;. Please verify your application.
Product Features:
See More
Product Features:
- MAXIMUM LIFE & PERFORMANCE: Both natural and SBR (Styrene Butadiene) rubber provide good abrasion resistance and aging stability to ensure maximum life and performance.
- MEETS OR EXCEEDS DUROMETER MEASUREMENTS: All rubber material is manufactured to specific Durometer (hardness) measurements based on the vehicle’s application requirements.
- HARDENED STEEL FASTENERS: All fasteners are made of hardened steel with heat treated Grade #5 bolts.
- SUPERIOR BOND: A special Chemlock® bonding agent is used to ensure a superior rubber-to-metal bond.
- HYDRAULIC MOUNT DESIGN: Hydraulic Mounts (applicable where OE) are designed for most front wheel drive vehicles because transverse drive train mounting.
- For Years: 1985-1994
- Weight approx: 1 Lbs
Nippon Reinz – AT Output Shaft Seal (Part No.J2557325822NRZ)
from
$4.35
AT Output Shaft Seal
Mark Automotive – AT Output Shaft Seal (Part No.J255728730MAM)
from
$9.05
AT Output Shaft Seal
Popular 1986 Subaru GL Transmission Parts Categories
1986 Subaru GL Transmission Parts
You count on your 1986 Subaru GL to run right. That means taking care of it with regular maintenance, necessary repairs, and the right parts. Advance Auto Parts can help with all of that thanks to our extensive inventory of trusted Transmission Parts. With 40 Transmission Parts ranging in price from $1.85 to $94.99, you’re sure to find everything you need for your 1986 Subaru GL.
Brands matter. If you want to shop a specific Transmission Parts brand, we stock 14 different brands like Imperial, Permatex, and National. 1986 Subaru GL Transmission Parts start as low as $1.85!
One of the best ways to find top quality OEM or aftermarket Transmission Parts is by asking professionals. Short of that, you can shop with confidence thanks to our 814 extensive product reviews on 1986 Subaru GL Transmission Parts. Some of the top-rated Transmission Parts products we carry are Maxi-Kool® XL Transmission Oil Cooler with 5.0 stars and Econo-Kool® Transmission Oil Cooler with 4.3 stars.
Did we mention you can order your Transmission Parts from our online catalog and have them shipped right to your garage? Or, if you feel like seeing the parts first-hand, search for your nearest Advance Auto Parts location above and pick up in-store when you’re ready. Browse our full Transmission Parts inventory for your 1986 Subaru GL below to get started!
Top-Rated Transmission Parts Brands For Your 1986 Subaru GL
Trusted Transmission Parts OEM and aftermarket product brands are what Advance Auto Parts specializes in. The brands we work with are sure to keep that 1986 Subaru GL running right for years to come. In our inventory you’ll find brands like Imperial, Permatex, National, and even more.
Popular Permatex Transmission Parts
You’ll find popular Permatex brand products across Automatic Transmission Pan and Gaskets. All are waiting to get your 1986 Subaru GL back on the road. Some of the top-rated Permatex products in these categories are:
from
$26.99
(7)
High-Torque, High-Vibration RTV Silicone Gasket Maker, 13 OZ
Transmission Pan Gaskets
Top-Rated Imperial Transmission Parts
If Imperial are what you’re looking for, our inventory holds plenty. We stock Imperial brand Transmission Parts for your 1986 Subaru GL, and some of our most reviewed Imperial parts include:
FAQs for 1986 Subaru GL Transmission Parts
What are the most purchased Transmission Parts for the 1986 Subaru GL?
Out of 40 Transmission Parts for the 1986 Subaru GL, the most popular in our inventory are:
from
$80.99
(8)
Plate and Fin Style Trans Cooler 3/4" x 9-1/2" x 11" Heavy Duty
OE Transmission Coolers
What are the top-rated 1986 Subaru GL Transmission Parts?
Top-rated Transmission Parts for your 1986 Subaru GL based on customer reviews/ratings are:
from
$73.99
(7)
Maxi-Kool® XL Transmission Oil Cooler
“this transmission oil cooler is replacing my one on my 2000 dodge dakota its priced right mid size and easy to put in the ome one is 250 this is 60 an”
from
$52.99
(4)
Econo-Kool® Transmission Oil Cooler
“I just like the additional cooling on all my vehicles for transmission to last longer. They aren’t getting any cheaper to overhaul!”
from
$59.99
(3)
Plate and Fin Style Trans Cooler 3/4" x 5-7/8" x 11" Light Duty
“Bought these before for my vehicles. Put this one on a Silhouette and by-passed the in-radiator cooler altogether. Haven’t put a thermometer on it t”
