1986 Plymouth Horizon Cooling and Climate Controls

Essential 1986 Plymouth Horizon Cooling and Climate Controls

Imperial – Electric Fan – 14" Diameter (Part No.226114)

Electric Fan - 14" Diameter

from

$99.99
Product Features:
  • Motors built and tested to quality specifications
  • 14 in. universal fit reversible fan
  • 1250 CFM
  • UNIVERSAL fan, NOT a direct OE replacement. Measure core and verify space.
See More

Carquest Premium – A/C Compressor Cut-Out Switch (Part No.ACA2011)

A/C Compressor Cut-Out Switch

from

$19.49
A/C Compressor Cut-Out Switch

Factory Air – Green Round O-Ring (Part No.24650)

Green Round O-Ring

from

$1.99
Made from HNBR material; Compatible with R12 And R134A; High quality construction; Universal applications
See More

Carquest Premium – Standard Thermostat: 195 Degrees (Part No.13429)

Standard Thermostat: 195 Degrees

from

$12.49
Carquest Premium Thermostats are manufactured with OEM quality materials and safety standards by an OE Supplier. This thermostat will meet and exceed the expectations of the OE thermostat to insure the best product for your cooling system. Stands up to even the most demanding automotive cooling systems. Manufactured with OEM specifications and processes. Copper case and wax compound assures rapid response to temperature changes in the coolant. Offset design, air relief valve, and OEM style seals included where applicable.

Product Features:
  • High grade stainless steel and copper construction
  • Meets or exceeds OEM standards
  • Consistent and precise response to cooling system needs
  • Original equipment design for worry-free direct fit replacement
  • 100% tested and calibrated
See More

Imperial – Electric Fan – 12" Diameter (Part No.226112)

Electric Fan - 12" Diameter

from

$94.99
Electric fan with 12″ diameter. Imperial electric fans are reversible for push or pull operation and are designed with a thin, aerodynamic profile for applications with limited space.

Product Features:
  • Rapid-Cool® Thin-Line electric fans
  • 12″ Diameter
  • 800 CFM
  • Use as a pusher or puller fan
See More

Permatex – Sensor-Safe, High Torque RTV Silicone Gasket Maker (Part No.22074)

Sensor-Safe, High Torque RTV Silicone Gasket Maker

from

$6.99
Permatex Ultra Grey is specified for high torque and high vibration applications. Ultra Grey offers a sensor-safe, low odor, non-corrosive formula and is OEM specified to fit dealership warranty requirements. This high performance gasket maker meets performance specs of OE silicone gaskets and can be used on high torque and vibration applications such as valve covers, water pump, intake manifold end seals ad thermostat housings.

Product Features:
  • High torque and rigidity
  • Sensor-safe, non-corrosive formula
  • OEM specified
  • Low-odor, non-corrosive formula
  • Ideal for closed spaced bolt patterns
See More

Carquest Premium – A/C Tube and Fin Evaporator (Part No.T54107)

A/C Tube and Fin Evaporator

from

$113.99
Carquest Evaporators are designed to remove heat from the air inside the passenger compartment of a vehicle resulting in cooler air temperatures. They are manufactured to meet or exceed original equipment specifications and are designed to easily fit into the engine compartment.

Product Features:
  • The design and manufacture of the evaporators result in uniform refrigerant distribution with optimal flow for improved performance and maximum heat transfer.
  • The evaporators are constructed to offer a lightweight, compact design that will fit easily within the engine compartment.
  • The surface treatment on each part ensures optimum water drainage to prevent mold and odors in the system.
  • The evaporators are 100% tested to meet or exceed original equipment specifications. Each part is helium tested to ensure no leaks.
  • O-Rings and gaskets necessary for installation are included.
See More

Carquest Premium – Coolant Housing/Water Outlet: Gasket Included (Part No.85107)

Coolant Housing/Water Outlet: Gasket Included

from

$15.79
We are proud to offer this CARQUEST product line: CARQUEST Water Outlets. Our products are engineered and tested to provide years of trouble free operation and designed to be hassle free OE replacement part that meets and/or exceeds OE standards. Backed by over 50 years of mobile temperature control experience, fix it once and fix it right with CARQUST Water Outlets and Thermostat Housings.

Product Features:
  • Meets and/or exceeds OEM standard
  • Includes quality gasket or O-ring to ensure proper seal (where applicable)
  • Coated with corrosion and rust inhibitor
  • 100% leak tested
  • Direct-fit replacement for ease of installation
See More

Carquest Premium – Engine Coolant Temperature Sensor (Part No.WTA1607)

Engine Coolant Temperature Sensor

from

$13.99
Carquest premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.
See More

Factory Air – New Chrysler A590 Clutch Assembly w/ Coil (Part No.47840)

New Chrysler A590 Clutch Assembly w/ Coil

from

$106.99
High quality OE replacement part with all components needed to complete the job

Product Features:
  • All mounting hardware included
  • Every coil tested for proper ohms
  • Vehicle specific applications
  • Coated to prevent corrosion
See More

Carquest Premium – HVAC Blower Motor Resistor Connector (Part No.PTC1192)

HVAC Blower Motor Resistor Connector

from

$29.99
CARQUEST premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.

Product Features:
  • Premium quality materials for longer service life
  • Sealed connections (where applicable) to prevent environmental corrosion and performance issues
  • Global coverage for import and/or domestic applications
  • OE specified wire gauge to ensure a reliable electrical connection
  • Designed to meet or exceed OE specifications in form, fit and function
See More

Carquest Premium – Radiator Cap Tester Adapter (Part No.12552)

Radiator Cap Tester Adapter

from

$14.29
Tester adapter for the MT-300 cooling system pressure testers. Professional grade test equipment to ensure an automotive cooling system is operating at the correct pressure. Made from high quality materials to ensure durability. Designed to test automotive coolant caps.

Product Features:
  • Machined metal construction
  • Works with MT-300 pressure tester
  • Tests coolant caps
  • Professional quality
See More

Carquest Premium – A/C New; w/ Clutch; w/ A590 Compressor (Part No.T58100)

A/C New; w/ Clutch; w/ A590 Compressor

from

$359.99
Carquest New Compressors are designed, manufactured and tested to meet or exceed strict original equipment specifications for superior quality and performance. Each new compressor is tested to provide durable life to the vehicle’s air conditioning system. All new compressor components are assembled using state of the art equipment and techniques to ensure smooth operation. Each part is equipped with a clutch and connector that matches the original equipment part and provides an exact replacement to your vehicle’s part. All compressors are supplied with the necessary gaskets and o-rings for installation.

Product Features:
  • Each new compressor design undergoes rigorous life cycle testing at high RPMs and pressures to ensure that they can withstand years in the harshest conditions.
  • New compressors are designed with utmost precision using 3D coordinate measuring machines to ensure a perfect fit.
  • The production process contains automated controls at every stage that alerts and halts production in case of an error, assuring that the finished product will always be flawless.
  • All new compressors must pass a helium leak test and pump up function test prior to packaging.
  • O-Rings and gaskets necessary for installation are included.
  • O-Rings and gaskets necessary for installation are included.
See More

Factory Air – Green Round O-Ring (Part No.24608)

Green Round O-Ring

from

$1.99
Made from HNBR material; Compatible with R12 And R134A; High quality construction; Universal applications
See More

Dorman – 5-Wire Style Relay (Part No.85170)

5-Wire Style Relay

from

$15.99
This HVAC relay connector is designed to match the appearance and function of the original hardware on specified applications. Made of quality materials, it is engineered for reliable performance and durability.

Product Features:
  • Direct replacement – this HVAC relay connector matches the appearance and function of the factory hardware on specified applications
  • Ideal solution – this connector is a reliable replacement for an original part that is missing or has failed due to fatigue
  • Durable construction – this part is made from quality materials to ensure reliable performance and long service life
  • Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience
See More

Carquest Premium – HVAC Blower Motor Resistor (Part No.RUA1412)

HVAC Blower Motor Resistor

from

$22.99
Carquest premium direct replacement resistors are designed to match the operation and performance of the original equipment to restore the proper heating and cooling functionality.

Product Features:
  • Restores Functionality- Manufactured to original equipment specifications to restore full HVAC operation
  • Original equipment quality – Carquest blower motor resistors meet the high quality material standards and tolerances as the original equipment
  • Complete kit – Each kit includes the resistor, connector, and splice connectors to complete the job
  • Direct replacement – Carquest blower motor resistor kits are a direct replacement to the original equipment resistor
See More

Dorman – Plastic Drain Cock Push-In Style With Captive Thread (Part No.490-234.1)

Plastic Drain Cock Push-In Style With Captive Thread

from

$10.29
This radiator drain petcock is a direct replacement for the original equipment plug that may have deteriorated or corroded. Made of quality materials, this petcock is engineered to strict standards for durable use over time.

Product Features:
  • Direct replacement – this radiator drain petcock matches the fit and function of the original equipment part
  • Durable construction – this part is made of quality materials for a long service life
  • Saves money – offers original equipment quality at a competitive price
  • Quality assured – this petcock has undergone virtual testing to assure proper fit and function
See More

Mahle – Water Pipe O-Ring (Part No.G2026372923MAH)

Water Pipe O-Ring

from

$2.46
Water Pipe O-Ring

Carquest Premium – Radiator: With Transmission Oil Cooler (Part No.433867)

Radiator: With Transmission Oil Cooler

from

$329.99
Carquest Premium radiators are designed and engineered for maximum performance, using the highest-grade materials to ensure all radiators meet or exceed original equipment (O.E.) fit, form and function. Carquest Premium radiators are built by manufacturers that meet IATF 16949 certified framework, an internationally recognized proof of quality in the automotive industry. Most modern vehicles use radiators with plastic tanks and our parts are engineered with integrated ribbing to prevent damage during thermal cycling. Carquest Premium radiators are also 100% tested to ensure a durable, leak-free cooling system repair.

Product Features:
  • Thermal tested under real-life temperature simulations
  • High tensile strength aluminum for maximum crimp strength
  • Plastic tanks are engineered with integrated ribbing for added strength to withstand cracks, bowing and distortion during thermal cycles
  • Thermal expansion slots extend core life and reduce failure rates by allowing improved core expansion and contraction during systematic heat cycles
  • Oil cooler designs meet or exceed OE standards, keeping the vehicle’s engine and transmission performing at optimal conditions
  • OEM grade, premium fittings for transmission or engine oil coolers (where applicable)
See More

Permatex – Sensor-Safe, High-Torque RTV Silicone Gasket Maker (Part No.82194)

Sensor-Safe, High-Torque RTV Silicone Gasket Maker

from

$11.49
Permatex Ultra Grey is specified for high torque and high vibration applications. Ultra Grey offers a sensor-safe, low odor, non-corrosive formula and is OEM specified to fit dealership warranty requirements. This high performance gasket maker meets performance specs of OE silicone gaskets and can be used on high torque and vibration applications such as valve covers, water pump, intake manifold end seals ad thermostat housings.

Product Features:
  • High torque and rigidity
  • Sensor-safe, non-corrosive formula
  • OEM specified
  • Low-odor, non-corrosive formula
  • Ideal for closed spaced bolt patterns
See More

Beck/Arnley – Thermostat Gasket (Part No.039-0081)

Thermostat Gasket

from

$2.29
Beck/Arnley parts meet foreign nameplate OE specifications for form, fit and function. Our product specialists work with a network of global sourcing partners so you can install the right part with confidence.

Product Features:
  • Matches OE form, fit and function
  • High quality rubber or composite material designed to withstand high heat conditions
  • Quality construction for durability
  • Packaged in clear plastic for easy visibility and identification of all components
  • Application specific for this vehicle
See More

Permatex – The Right Stuff Grey Instant Gasket Maker, 147ml Cartridge (Part No.34311)

The Right Stuff Grey Instant Gasket Maker, 147ml Cartridge

from

$28.49
Specifically designed to perform under higher torque loads associated with engines having closely spaced bolt patterns (typically import vehicles). This product is blowout resistant, allowing leakproof gaskets to be made and put into service in just one minute. Sensor-safe, The Right Stuff GREY seals instantly, forming a reliable, long lasting elastomeric rubber gasket that outperforms pre-molded gaskets. Specified by major import OEMs, this material is resistant to powertrain fluids (oil, coolant and ATF) and operates in environments to 450°F (232°C) continuous; 500°F (260°C) intermittent.

Product Features:
  • Ideal for rigid cast aluminum parts
  • Meets OEM Specifications
  • Sensor safe & non-corrosive
  • Performs under higher torque loads associated with engines having closely spaced bolt patterns (typical of import vehicles)
  • Blowout resistant, allowing leakproof gaskets to be made in just one minute
  • Seals instantly, forming a reliable, long lasting elastomeric rubber gasket
  • Superior resistance to powertrain fluids including engine oil, transmission fluid, gear lube and coolants
  • Temperature range -60°C to 260°C (-75°F to 500°F) intermittent
  • Applications: Automotive, industrial and marine gaskets, valve covers, gearbox covers, pumps, compressors, oil pans, thermostat housings, water pumps, etc.
See More

Carquest Premium – Temperature Sender With Gauge (Part No.WTC1199)

Temperature Sender With Gauge

from

$8.99
Approved materials for increased durability in even the most extreme temperatures. All MotoRad Coolant Temperature Sensors are designed to meet or exceed OEM specifications at our ISO TS16949 manufacturing facilities.

Product Features:
  • 100% factory resistance calibrated to ensure precision tolerances, resulting in extremely accurate temperature for optimal performance
  • Thread Sealant and/or O-ring pre-installed on applicable sensors to ensure leak free performance
  • Brass sensor housing precision machined to meet or exceed OE thermal conductivity
  • OE precision matched thermistor position for correct output parameters
  • Extensive product testing includes salt spray, high/low temperature impact, thermal vibration, durability, static electricity, and micro tension, among other tests, to ensure all sensors meet or exceed OEM specifications.
See More

Carquest Premium – Engine Water Pump: New, Gasket/Seals Included (Part No.T2129)

Engine Water Pump: New, Gasket/Seals Included

from

$41.99
Carquest Premium water pumps are 100% new, high-quality parts that meet or exceed original equipment (O.E.) specifications. All components, including the housing, hub, bearings, gaskets and seals are designed for long-lasting service life. These water pumps are supplied with the gaskets or seals necessary for installation. Our Carquest Premium water pumps undergo stringent testing to ensure superior performance that we stand behind with an industry-leading warranty.

Product Features:
  • 100% tested for reliable performance
  • Durable housing features precisely machined mounting surface for proper sealing and fitment
  • Equipped with weep chamber or similar feature to help prevent unnecessary replacement
  • Included heavy-duty unitized bearings, pressed-on hubs and optimal impeller clearance for a long-lasting water pump
  • All gaskets or seals necessary for water pump are included
  • This pump is driven by the accessory belt and we recommend replacement if nearing service recommendation
  • This pump is driven by the timing chain; see vehicle manufacturer recommendation for replacement of timing components
  • This pump is driven by the timing belt; see vehicle manufacturer recommendation for replacement of timing components
See More

Carquest Premium – Heater Core (Part No.399116)

Heater Core

from

$56.99
Carquest Premium offers a complete line of automotive heater cores covering 94% of all North American vehicle applications. Carquest Premium provides value in several ways, including increased thermal performance and resistance to corrosion using enhanced design features, such as the latest fin and tube technology and design standardization for maximum availability. Carquest Premium offers certified heater cores that meet or exceed OE specifications and are all fitment checked in the actual vehicle’s HVAC heater module and are, thus, ready to be installed right out of the box for a “Drop-In Fit”. Carquest Premium heater cores are engineered and manufactured under ISO TS16949 quality systems and are 100% leak tested.

Product Features:
  • All heater cores are designed and tested to match or exceed OE specifications for form, fit and performance with a clear focus on obtaining the highest heat transfer performance possible through use of quality materials and manufacturing processes to ensu
  • Carquest Premium heater cores are engineered and manufactured under ISO TS16949 quality systems and are 100% leak tested.
  • Provides value in several ways, including increased thermal performance and resistance to corrosion using enhanced design features, such as the latest fin and tube technology and design standardization for maximum availability.
  • Carquest Premium offers a complete line of automotive heater cores covering 94% of all North American vehicle applications.
  • Our advanced engineering methods coupled with our innovative manufacturing technology provides products to the aftermarket that meet or exceed form, fit, and function of OEM Parts
See More

Carquest Premium – Blower Motor: Without Wheel (Part No.35500)

Blower Motor: Without Wheel

from

$45.49
Carquest Premium Blower Motors are engineered and tested to provide years of trouble free operation. Backed by over 50 years of mobile A/C experience, fix it once and fix it right with Carquest Premium Blower Motors. Meets or exceeds OE design. Magnetic size and properties compare or exceed OEM. Windings meet or exceed OEM Specifications. Motor RPM equivalent to or exceeds OEM motor.

Product Features:
  • Meets or exceeds OE design and performance
  • Magnetic size and properties compare or exceed OEM
  • Windings meet or exceed OEM specifications
  • Motor RPM equivalent to or exceeds OEM motor
See More

Carquest Premium – A/C Condenser (Part No.3026)

A/C Condenser

from

$115.99
The Carquest condenser is an integral component of the motor vehicle air conditioning system. This part condenses the refrigerant into a liquid to prepare it for entry into the compressor. The condenser is manufactured according to OEM design specificat

Product Features:
  • This is a parallel flow condenser that contains small micro-channels. It is highly recommended that this condenser be replaced if a failure has occurred in the vehicle’s air conditioning system that has resulted in debris contaminating the system. This
  • The Carquest condenser production process includes quality driven details such as using zinc-coated tubes and electrostatic paint spray at high temperatures to provide the best corrosion resistance and durability in our condensers.
  • Continuous molds, laser welding machines, semi-automatic assembly stations and other advanced equipment provide quality products.
  • Each condenser uses only the highest quality raw materials including pure aluminum (not substandard or recycled) to provide the highest quality standards from beginning to finished product.
  • All brackets are designed per OEM specifications to ensure strength and reduce vibration and movement.
  • We leak test 100% of our condensers in helium leak test chambers to ensure the product does not leak.
  • Our condensers are manufactured from rigid design standards to fit OEM dimensions.
  • Each condenser design endures a series of tests that includes performance testing, vibration testing, blast testing, and salt spray testing to simulate real world conditions.
  • Each Carquest condenser is packaged using superior box construction. This box is easy to open and seal. Each condenser is packaged in the box with internal protection to keep the part centered and away from the package edges. The package passes the fre
  • Each condenser uses only the highest quality raw materials including pure aluminum (not substandard or recycled) to ensure the highest quality standards from beginning to finished product.
  • All brackets are designed per OEM specifications to ensure strength and reduce vibration and movement.
  • We leak test 100% of our condensers in helium leak test chambers to ensure the product does not leak. This industry leading process is the most precise method and can detect even the smallest leak. The leak-free condenser is then charged with nitrogen and
  • Our condensers are manufactured from rigid design standards to match OEM dimensions. Each design undergoes a drop fit into the actual vehicle to ensure the final manufactured product provides an easy installation.
  • Each condenser design endures a series of tests that includes performance testing, vibration testing, blast testing, and salt spray testing to simulate real world conditions.
  • vibration testing
  • blast testing
  • and salt spray testing to simulate real world conditions.
See More

Carquest Premium – A/C Block Type Flange Expansion Valve (Part No.T38849)

A/C Block Type Flange Expansion Valve

from

$22.99
Carquest Expansion Valves are designed to regulate the flow of refrigerant through the air conditioning system to provide optimal cooling to the passenger compartment. Each expansion valve is manufactured to original equipment specifications to perform its function even in the harshest climates. Each part is supplied with the necessary gaskets and o-rings for installation.

Product Features:
  • The bodies of these expansion valves are machined from a single block of aluminum or brass metal.
  • Each expansion valve has settings for tonnage and superheat based on the vehicle specifications.
  • Each expansion valve is tested for function and leakage according to OEM specifications to ensure optimal performance of the air conditioning system.
  • O-Rings necessary for installation are included.
See More

1986 Plymouth Horizon Cooling and Climate Controls

You count on your 1986 Plymouth Horizon to run right. That means taking care of it with regular maintenance, necessary repairs, and the right parts. Advance Auto Parts can help with all of that thanks to our extensive inventory of trusted Cooling and Climate Controls. With 67 Cooling and Climate Controls ranging in price from $0.99 to $359.99, you’re sure to find everything you need for your 1986 Plymouth Horizon.

Brands matter. If you want to shop a specific Cooling and Climate Controls brand, we stock 13 different brands like Permatex, Carquest Premium, and Imperial. 1986 Plymouth Horizon Cooling and Climate Controls start as low as $0.99!

One of the best ways to find top quality OEM or aftermarket Cooling and Climate Controls is by asking professionals. Short of that, you can shop with confidence thanks to our 4,761 extensive product reviews on 1986 Plymouth Horizon Cooling and Climate Controls. Some of the top-rated Cooling and Climate Controls products we carry are Electric Fan – 12" Diameter with 3.5 stars and Adjustable Thermostatic Fan Control with 3.4 stars.

Did we mention you can order your Cooling and Climate Controls from our online catalog and have them shipped right to your garage? Or, if you feel like seeing the parts first-hand, search for your nearest Advance Auto Parts location above and pick up in-store when you’re ready. Browse our full Cooling and Climate Controls inventory for your 1986 Plymouth Horizon below to get started!

Top-Rated Cooling and Climate Controls Brands For Your 1986 Plymouth Horizon

Trusted Cooling and Climate Controls OEM and aftermarket product brands are what Advance Auto Parts specializes in. The brands we work with are sure to keep that 1986 Plymouth Horizon running right for years to come. In our inventory you’ll find brands like Permatex, Carquest Premium, Imperial, and even more.

Popular Delphi Cooling and Climate Controls

You’ll find popular Delphi brand products across Engine Cooling Parts. All are waiting to get your 1986 Plymouth Horizon back on the road. Some of the top-rated Delphi products in these categories are:
Engine Coolant Temperature Sensor
from $39.99
(1)
Engine Coolant Temperature Sensor
Coolant Temperature Sensors

Top-Rated Carquest Premium Cooling and Climate Controls


If Carquest Premium are what you’re looking for, our inventory holds plenty. We stock Carquest Premium brand Cooling and Climate Controls for your 1986 Plymouth Horizon, and some of our most reviewed Carquest Premium parts include:
Radiator Cap: 16 PSI
from $9.79
(260)
Radiator Cap: 16 PSI
Radiator Caps
Radiator Cap: 16 PSI
from $16.79
(91)
Radiator Cap: 16 PSI
Radiator Caps
Heater Core
from $69.99
(25)
Heater Core
Heater Cores

FAQs for 1986 Plymouth Horizon Cooling and Climate Controls

What are the most purchased Cooling and Climate Controls for the 1986 Plymouth Horizon?

Out of 67 Cooling and Climate Controls for the 1986 Plymouth Horizon, the most popular in our inventory are:
Water Pump & Thermostat RTV Silicone Gasket Maker, 0.5 OZ
from $6.99
(288)
Water Pump & Thermostat RTV Silicone Gasket Maker, 0.5 OZ
Engine Water Pump Inlet Pipe Gaskets
Sensor-Safe, High-Torque RTV Silicone Gasket Maker
from $11.49
(95)
Sensor-Safe, High-Torque RTV Silicone Gasket Maker
Water Pump Housing Gaskets
Adjustable Thermostatic Fan Control
from $22.99
(35)
Adjustable Thermostatic Fan Control
Engine Cooling Fan Controllers

What are the top-rated 1986 Plymouth Horizon Cooling and Climate Controls?

Top-rated Cooling and Climate Controls for your 1986 Plymouth Horizon based on customer reviews/ratings are:
Electric Fan - 12" Diameter
from $94.99
(38)
Electric Fan – 12" Diameter
“good”
Adjustable Thermostatic Fan Control
from $55.99
(33)
Adjustable Thermostatic Fan Control
“If you read the instructions it’s pretty self explanatory.”
Thermocap Radiator Cap
from $47.99
(17)
Thermocap Radiator Cap
“Worth the money if only for the looks. And will tell you the temp outside”