1986 Mercedes-Benz 300SDL Cooling and Climate Controls
More 1986 Mercedes-Benz 300SDL Cooling and Climate Controls Categories
If you’re looking for an original Cooling and Climate Controls replacement for a 1986 Mercedes-Benz 300SDL, you can search through our selection below. You’ll also find aftermarket and OEM Cooling and Climate Controls to meet your needs.
Essential 1986 Mercedes-Benz 300SDL Cooling and Climate Controls
Carquest Premium – A/C Block Type O-Ring Expansion Valve (Part No.T38602)
from
$44.99
Carquest Expansion Valves are designed to regulate the flow of refrigerant through the air conditioning system to provide optimal cooling to the passenger compartment. Each expansion valve is manufactured to original equipment specifications to perform its function even in the harshest climates. Each part is supplied with the necessary gaskets and o-rings for installation.
Product Features:
See More
Product Features:
- The bodies of these expansion valves are machined from a single block of aluminum or brass metal.
- Each expansion valve has settings for tonnage and superheat based on the vehicle specifications.
- Each expansion valve is tested for function and leakage according to OEM specifications to ensure optimal performance of the air conditioning system.
- O-Rings necessary for installation are included.
- O-Rings necessary for installation are included.
Carquest Premium – New Compressor with Clutch, Nippondenso 10PA17C (Part No.T58336)
from
$334.99
High quality OE replacement part with all components needed to complete the job
Product Features:
See More
Product Features:
- All compressors go through sophisticated testing and leak test processes
- Includes specific electrical connector to eliminate splicing
- For ease of installation this compressor includes all gaskets, O-rings or sealing washers needed to repair your car
- Validated for fit, form, and function to OE standards
ACM – Air Conditioning Manifold Seal Kit (Part No.R111169968ACM)
from
$5.41
ACM is a supplier of Original Equipment quality climate control products. Seal rings for suction and delivery lines.
See More
Carquest Premium – Radiator Cap Tester Adapter (Part No.12552)
from
$14.29
Tester adapter for the MT-300 cooling system pressure testers. Professional grade test equipment to ensure an automotive cooling system is operating at the correct pressure. Made from high quality materials to ensure durability. Designed to test automotive coolant caps.
Product Features:
See More
Product Features:
- Machined metal construction
- Works with MT-300 pressure tester
- Tests coolant caps
- Professional quality
Vaico – Rivet (Part No.Q200173665VCO)
from
$1.86
Rivet
FAE – Engine Cooling Auxiliary Thermo-Fan Switch (Part No.G503025583FAE)
from
$45.47
The FAE Engine Cooling Thermo-Fan Switch is a high quality Original Equipment replacement that is manufactured to meet or exceed OE specifications for fit, form, and function.
Product Features:
See More
Product Features:
- Corrosion resistant housings
- Nickel-plated or brass terminals for superior conductivity
- High-temp composite O.E.M.-type connectors designed to mate with vehicle wiring harness without modification
- Thermal switches matched to OEM temperatures to assure consistent performance
Carquest Premium – Temperature Sender With Gauge (Part No.WTC1249)
from
$18.99
Approved materials for increased durability in even the most extreme temperatures. All MotoRad Coolant Temperature Sensors are designed to meet or exceed OEM specifications at our ISO TS16949 manufacturing facilities.
Product Features:
See More
Product Features:
- 100% factory resistance calibrated to ensure precision tolerances, resulting in extremely accurate temperature for optimal performance
- Thread Sealant and/or O-ring pre-installed on applicable sensors to ensure leak free performance
- Brass sensor housing precision machined to meet or exceed OE thermal conductivity
- OE precision matched thermistor position for correct output parameters
- Extensive product testing includes salt spray, high/low temperature impact, thermal vibration, durability, static electricity, and micro tension, among other tests, to ensure all sensors meet or exceed OEM specifications.
Stant – SEAL THERMOSTAT (Part No.27271)
from
$1.29
SEAL THERMOSTAT
Factory Air – Sealing Washer Kit (Part No.24336)
from
$12.29
Includes O-Ring; Compatible with R12 And R134A; High quality construction; Universal applications
See More
Dorman – 5-Wire Style Relay (Part No.85170)
from
$15.99
This HVAC relay connector is designed to match the appearance and function of the original hardware on specified applications. Made of quality materials, it is engineered for reliable performance and durability.
Product Features:
See More
Product Features:
- Direct replacement – this HVAC relay connector matches the appearance and function of the factory hardware on specified applications
- Ideal solution – this connector is a reliable replacement for an original part that is missing or has failed due to fatigue
- Durable construction – this part is made from quality materials to ensure reliable performance and long service life
- Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience
Carquest Premium – Daytime Running Light Relay (Part No.RLC1001)
from
$59.99
Carquest premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.
See More
Permatex – Ultra Grey RTV Silicone Gasket Maker, 13 OZ (Part No.82195)
from
$26.99
Permatex Ultra Grey is specified for high torque and high vibration applications. Ultra Grey offers a sensor-safe, low odor, non-corrosive formula and is OEM specified to fit dealership warranty requirements. This high performance gasket maker meets performance specs of OE silicone gaskets and can be used on high torque and vibration applications such as valve covers, water pump, intake manifold end seals ad thermostat housings.
Product Features:
See More
Product Features:
- High torque and rigidity
- Sensor-safe, non-corrosive formula
- OEM specified
- Low-odor, non-corrosive formula
- Ideal for closed spaced bolt patterns
APA/URO Parts – Coolant Level Sensor (Part No.G105016387APA)
from
$25.91
A.P.A. URO is a supplier to many automotive manufacturers and provides OE quality European replacement parts to the aftermarket. URO Parts is a highly diversified product line including, body rubber, electrical, suspension, steering, cooling and air conditioning components.
See More
Behr – Hella Service Visco® Engine Cooling Fan clutch (Part No.G501081391BEH)
from
$300.43
The Visco® clutch has the task of making the frictional connection to the fan wheel depending on the temperature, and influencing its speed. The drive torque is transferred by means of wear-free viscous friction to the fan wheel, the continuously variable speed of which is set on the basis of the operating conditions. In the case of the electrically-driven Visco® clutch, control takes place directly via sensors. Requirement-based cooling optimizes the coolant temperature, engine noise and fuel consumption.
Product Features:
See More
Product Features:
- Out of box, drop in replacements
- Factory mounts for easy install
- Exact fit
- Reduced labor time
- Higher customer satisfaction
Factory Air – Green Round O-Ring (Part No.24615)
from
$1.99
Made from HNBR material; Compatible with R12 And R134A; High quality construction; Universal applications
See More
Permatex – The Right Stuff: 1 Minute Gasket Maker: Grey, 3 OZ (Part No.25238)
from
$19.99
Permatex’s The Right Stuff 1 Minute Series offers the fastest return to service in just 1 minute! This leak-proof, elastomeric “Formed-in-place” material is more reliable and longer lasting than pre-cut gaskets. It is blowout resistant and protects against leaks and seepage caused by vibration and thermal expansion. The Right Stuff 1 Minute Grey is specified for high torque and high vibration applications and is formulated to meet or exceed performance standards for long-term sealability, durability and handling.
Product Features:
See More
Product Features:
- Designed to perform under higher torque loads associated with engines having closely spaced bolt patterns
- Sensor-safe, non-corrosive, RTV silicone
- Protects against leaks caused by vibration and thermal expansion
- Meets performance specs of OE silicone gaskets
- Quickly returns vehicle to service in just 1 minute
Factory Air – Cap & Valve A/C System Seal Kit (Part No.26777)
from
$16.99
High quality OE replacement part with all components needed to complete the job
Product Features:
See More
Product Features:
- All the seals needed to complete the job
- Compatible with both R12 and R134a refrigerants
- SUV and rear air applications
- Application specific
Carquest Premium – A/C Filter Drier (Part No.T33384)
from
$47.99
Carquest Accumulators and Receiver Driers are designed to store, filter and dry the air conditioning refrigerant to provide proper performance and durability for the air conditioning system. They are manufactured to meet or exceed original equipment specifications.
Product Features:
See More
Product Features:
- All parts meet or exceed original equipment standards for moisture absorption, pressure and temperature resistance, air tightness, vibration resistance, corrosiveness, and pulse pressure.
- Desiccant is 100% tested and assembled in a controlled environment to ensure performance meets or exceeds original equipment standards.
- All accumulators and receiver driers are helium leak tested prior to packaging.
- O-Rings necessary for installation are included.
- O-Rings necessary for installation are included.
Nissens – Nissens Heater Core (Part No.R300070302NSS)
from
$141.01
Nissens manufactures a direct fit Heater Core that guarantees OEM quality, fit and performance.
Product Features:
See More
Product Features:
- OEM Quality Direct fit Application
- Meets or exceeds OEM specifications.
- Utilizes the factory style mounts, connectors and fittings.
- Provides exceptional reliability.
Motorad – Standard Thermostat: 174 Degrees (Part No.247-174)
from
$46.49
Manufactured with OEM quality materials and safety standards by an OE Supplier. This thermostat will meet and exceed the expectations of the OE thermostat to insure the best product for your cooling system. Stands up to even the most demanding automotive cooling systems. Manufactured with OEM specifications and processes. Copper case and wax compound assures rapid response to temperature changes in the coolant. Offset design, air relief valve, and OEM style seals included where applicable.
Product Features:
See More
Product Features:
- High grade stainless steel and copper construction
- Meets or exceeds OEM standards
- Consistent and precise response to cooling system needs
- Original equipment design for worry-free direct fit replacement
- 100% tested and calibrated
Rein – Cap-Expansion Tank (Part No.CPE0026P)
from
$11.49
Rein Automotive OE Quality expansion tank caps are designed to be direct replacements for OE caps. Rein caps are designed to match or exceed the OE materials used and are produced to the highest standards to ensure long service life. Rein Automotive OE quality expansion tank caps keep the coolant system at the proper pressure just like the OE cap.
Product Features:
See More
Product Features:
- Manufactured to strict engineering standards/specifications in materials and tolerances.
- Direct fit.
- Meets or exceeds pressure specifications demanded by the OE manufacturer.
- Produced by an original equipment supplier.
Behr – A/C Pressure Switch (Part No.R1054178181BEH)
from
$22.52
Behr GmbH & Co. KG, Stuttgart, is a specialist for automotive air conditioning and engine cooling systems, the Behr Group is one of the world’s leading manufacturers and suppliers of Original Equipment cooling and air conditioning products for European passenger and commercial vehicles. 2 bar low pressure and 30 bar high pressure binary switch. This switch is designed to be compatible with R-12 and R134a refrigerants. Located on receiver-drier with 2 spade terminals. Used for compressor cut-out.
See More
Dorman – Electrical Harness – 2-Wire GM A/C Clutch with Diode (Part No.85143)
from
$11.99
This HVAC clutch coil connector is designed to match the appearance and function of the original hardware on specified applications. Made of quality materials, it is engineered for reliable performance and durability.
Product Features:
See More
Product Features:
- Direct replacement – this HVAC clutch coil connector matches the appearance and function of the factory hardware on specified applications
- Ideal solution – this connector is a reliable replacement for an original part that is missing or has failed due to fatigue
- Durable construction – this part is made from quality materials to ensure reliable performance and long service life
- Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience
Behr – Radiator Drain Plug (Part No.G106011756BEH)
from
$11.09
Radiator Drain Plug
Permatex – Water Pump & Thermostat RTV Silicone Gasket Maker, 0.5 OZ (Part No.22071)
from
$6.99
Permatex Water Pump & Thermostat RTV Silicone Gasket Maker is a noncorrosive, sensor-safe RTV silicone gasket material formulated for water pumps and thermostat housings. Permatex Water Pump & Thermostat has the highest water-glycol resistance available in an RTV silicone.
Product Features:
See More
Product Features:
- Sensor-safe, noncorrosive RTV silicone gasket material
- Formulated specifically for water pumps and thermostat housings
- Highest water-glycol resistance available in RTV silicone
- Superior adhesion and flexibility
- Can be used as a gasket maker or dressing
Permatex – Ultra Grey RTV Silicone Gasket Maker, 0.5 OZ (Part No.22074)
from
$6.99
Permatex Ultra Grey is specified for high torque and high vibration applications. Ultra Grey offers a sensor-safe, low odor, non-corrosive formula and is OEM specified to fit dealership warranty requirements. This high performance gasket maker meets performance specs of OE silicone gaskets and can be used on high torque and vibration applications such as valve covers, water pump, intake manifold end seals ad thermostat housings.
Product Features:
See More
Product Features:
- High torque and rigidity
- Sensor-safe, non-corrosive formula
- OEM specified
- Low-odor, non-corrosive formula
- Ideal for closed spaced bolt patterns
Carquest Premium – Radiator Cap: 20 PSI (Part No.10235)
from
$8.79
Crafted to meet the exact specifications set by Original Equipment Manufacturers (OEM), these products are engineered for effortless installation and removal. Constructed from premium-grade components, incorporating proper relief and vacuum valves, they ensure optimal performance even in the most demanding automotive cooling systems. Rigorously quality-tested, these components provide exceptional, out-of-the-box performance and superior durability to meet or exceed the highest standards of today’s vehicles.
Product Features:
See More
Product Features:
- Maintains proper cooling system pressure
- Easy installation and removal
- 100% tested to ensure proper pressure and longevity
- Meets all OEM specifications
Carquest Premium – Radiator Cap: 20 PSI (Part No.10335)
from
$9.49
Crafted to meet the exact specifications set by Original Equipment Manufacturers (OEM), these products are engineered for effortless installation and removal. Constructed from premium-grade components, incorporating proper relief and vacuum valves, they ensure optimal performance even in the most demanding automotive cooling systems. Rigorously quality-tested, these components provide exceptional, out-of-the-box performance and superior durability to meet or exceed the highest standards of today’s vehicles.
Product Features:
See More
Product Features:
- Safety lever to vent coolant pressure before removal
- Maintains proper cooling system pressure
- Easy installation and removal
- 100% tested to ensure proper pressure and longevity
- Meets all OEM specifications
Popular 1986 Mercedes-Benz 300SDL Cooling and Climate Controls Categories
1986 Mercedes-Benz 300SDL Cooling and Climate Controls
You count on your 1986 Mercedes-Benz 300SDL to run right. That means taking care of it with regular maintenance, necessary repairs, and the right parts. Advance Auto Parts can help with all of that thanks to our extensive inventory of trusted Cooling and Climate Controls. With 62 Cooling and Climate Controls ranging in price from $0.99 to $379.72, you’re sure to find everything you need for your 1986 Mercedes-Benz 300SDL.
Brands matter. If you want to shop a specific Cooling and Climate Controls brand, we stock 23 different brands like Permatex, Carquest Premium, and Factory Air. 1986 Mercedes-Benz 300SDL Cooling and Climate Controls start as low as $0.99!
One of the best ways to find top quality OEM or aftermarket Cooling and Climate Controls is by asking professionals. Short of that, you can shop with confidence thanks to our 337 extensive product reviews on 1986 Mercedes-Benz 300SDL Cooling and Climate Controls. Some of the top-rated Cooling and Climate Controls products we carry are Radiator Cap: 20 PSI with 5.0 stars and Standard Thermostat: 180 Degrees with 3.5 stars.
Did we mention you can order your Cooling and Climate Controls from our online catalog and have them shipped right to your garage? Or, if you feel like seeing the parts first-hand, search for your nearest Advance Auto Parts location above and pick up in-store when you’re ready. Browse our full Cooling and Climate Controls inventory for your 1986 Mercedes-Benz 300SDL below to get started!
Top-Rated Cooling and Climate Controls Brands For Your 1986 Mercedes-Benz 300SDL
Trusted Cooling and Climate Controls OEM and aftermarket product brands are what Advance Auto Parts specializes in. The brands we work with are sure to keep that 1986 Mercedes-Benz 300SDL running right for years to come. In our inventory you’ll find brands like Permatex, Carquest Premium, Factory Air, and even more.
Popular Carquest Standard Cooling and Climate Controls
You’ll find popular Carquest Standard brand products across Air Conditioning Parts. All are waiting to get your 1986 Mercedes-Benz 300SDL back on the road. Some of the top-rated Carquest Standard products in these categories are:
Top-Rated Permatex Cooling and Climate Controls
If Permatex are what you’re looking for, our inventory holds plenty. We stock Permatex brand Cooling and Climate Controls for your 1986 Mercedes-Benz 300SDL, and some of our most reviewed Permatex parts include:
FAQs for 1986 Mercedes-Benz 300SDL Cooling and Climate Controls
What are the most purchased Cooling and Climate Controls for the 1986 Mercedes-Benz 300SDL?
Out of 62 Cooling and Climate Controls for the 1986 Mercedes-Benz 300SDL, the most popular in our inventory are:
What are the top-rated 1986 Mercedes-Benz 300SDL Cooling and Climate Controls?
Top-rated Cooling and Climate Controls for your 1986 Mercedes-Benz 300SDL based on customer reviews/ratings are:
from
$22.99
(2)
Standard Thermostat: 180 Degrees
“Perfect fit, this is the correct spec. temperature for my 240D. I think the old one was a higher temp. put in by the previous owner. The car is runnin”
from
$44.99
(1)
A/C Block Type O-Ring Expansion Valve
“The one delegated for 99’s did not have the two mounting holes required by my car. I actually needed the 2000 year model valve. That one worked great.”
