1986 Ford E-350 Econoline Differentials

Name: O-Ring For Dana 60 Zip Locker Seal Housing
Brand: Yukon Gear
SKU: 34006
Price: 11.29 USD

Find your specific 1986 Ford E-350 Econoline original or aftermarket Differentials below. Order your parts online and have delivered to your home or pick up in-store at Advance Auto.

Essential 1986 Ford E-350 Econoline Differentials

from

$11.29

Product Features:

O-ring for seal housing
Fits Dana Spicer 60

from

$301.99

Yukon standard open spider gear replacement kit for Dana 60 and 61 with 35 spline axles. Yukon uses higher quality materials and better techniques than OEM to ensure a longer lasting spider gear set. All components come with a one year warranty against manufacturing defects.

Product Features:

Spider gear kit
Fit Dana Spicer 60 open differential with 35 spline axles
Includes two side gears, two pinion gears, cross pin shaft, roll pin and spider gear thrust washers.

from

$21.29

Pro-King is the leading supplier of transmission and driveline products in the aftermarket.

Product Features:

All products are designed to meet or exceed OE quality, form, fit and funtion.

from

$5.99

3/8″ cover bolt, Dana 60, Dana 70 & Dana 80.

Product Features:

Cover bolt for Dana Spicer 60, 70 and 80
3/8″

from

$3.99

Product Features:

Pinion nut washer for Chrysler 7.25″, 8.25″, 8.75″ with 29 spline pinion, Jeep JK rear, Dana Spicer 60, 70, 70U and 70HD and 2007-2010 Ford 10.5″

from

$23.99

Product Features:

Brand may vary by location

from

$117.99

Product Features:

PINION YOKE
CAST:1310
U-BOLT STYLE

from

$9.99

Product Features:

Inner oil slinger for Dana Spicer 60

from

$994.99

Differential

from

$344.99

Yukon Pinion installation kits are a terrific solution for gear installation on lower mileage vehicles where the carrier bearings & races can be reused. This kit uses Timken bearings and races along with a high quality pinion seal and small parts. Included in this kit are the pinion bearings and races, pilot bearing (if applicable), crush sleeve (if applicable), complete pinion shim kit, thread locker, and marking compound with brush. Yukon does extensive research for each application to make sure your kit will arrive with all the correct parts you need to install your pinion gear.

Product Features:

Fits Dana Spicer 80 with 4.375″ O.D. pinion bearing
Included are pinion bearings and races, pinion seal, pinion nut, complete pinion shim kit, and marking compound with brush.

from

$63.99

This direct replacement differential cover matches the fit and function of the original equipment diff cover for a reliable, leak-free repair. It features a durable design, made to strict specifications, to help ensure reliable service life.

Product Features:

Direct replacement – this differential cover matches the fit and function of the original equipment diff cover on select vehicles
Reliable repair – the smart solution for fixing an existing cover that’s rusted, damaged or leaking differential fluid
Durable construction – this differential cover is made according to strict engineering standards to help ensure dependability
Trustworthy quality – backed by a team of product experts in the United States and more than a century of automotive experience

from

$29.99

20 long air line for Zip Locker.

Product Features:

Air line
20′ in length

from

$409.99

Differential Carrier

from

$659.99

Yukon replacement positraction internals for Dana 60 (full- and semi-floating) with 35 spline axles. Yukon uses higher quality materials and better techniques than OEM to ensure a longer lasting spider gear set. This kit includes clutches. All components come with a one year warranty against manufacturing defects.

Product Features:

Spider gear kit
Fits Dana Spicer 60 with Trac Loc positraction with 35 spline axles
Includes two side gears, two pinion gears, cross pin shaft, roll pin and spider gear thrust washers.

from

$215.99

Bearing race driver. No return.

Product Features:

Bearing race driver
Fits HM88510 race
All steel construction

from

$1119.99

Differential

from

$172.99

Motive Gear Differential Bearing Kits Include Front & Rear Pinion Bearing, Pinion Seal, Carrier Bearings, Pilot Bearing Where Applicable, Gear Marking Compound, Crush Sleeve, Pinion Nut, Brush, Thread Locking Compound And Cover Gasket Or Rtv

Product Features:

DANA-60 TIMKEN MASTER KIT

from

$689.99

The Yukon carrier bearing Puller works with an impact gun to quickly and safely remove carrier bearings without damaging them. This unit comes with a handy bench top stand and works with up to most standard one ton applications. This unit is works with differentials up to one-ton applcations. It is not compatible with Dana 70HD, Dana 80, 10.25″ & 10.5″ Ford, or GM & Chrysler 11.5″ differentials.

Product Features:

Carrier bearing puller
Works with an impact gun to safely and easliy remove carrrier bearings
Not compatible with Dana 70HD, Dana 80, Ford 10.25″ and 10.5″ or Gm and Chrysler 11.5″ applications

from

$187.99

Yukon replacement yoke for Dana 60 and 70 with a 1330 U/joint size. 3.625″ snap ring span, 1.0625″ cap diameter. Outside snap ring. This yoke uses u-bolts. All Yukon yokes come with a one year warranty against manufacturing defects. This is a strap style yoke.

Product Features:

Fits Dana Spicer 60, 70, 70U and 70HD
29 spline
1330 u-joint size
3.625″ snap ring span
1.062″ cap diameter
Outside snap ring design
Strap style

from

$13.99

Product Features:

Cover gasket
Fits Dana Spicer 60, 70, 70U and 70HD

from

$9.99

Crush Sleeve for Model 20, Ford 10.25″, 10.5″, 7.5″, 8.8″, 9 3/8″, 9″ & 9.75″. .480″ long.

Product Features:

Crush sleeve for AMC Model 20, Ford 10.25″, 10.5″, 7.5″, 8.8″, 9″ and 9.75″
0.480″ tall

from

$13.99

10.25″ & 10.5″ cover gasket.

Product Features:

Cover gasket
Fits Ford 10.25″ and 10.5″

from

$7.99

Dana 60 & Dana 70 Power Lok case bolt.

Product Features:

Power Lok case bolt for Dana Spicer 60 and 70
7/16 x 14 thread
3.5″ long
9/16″ hex head

from

$180.99

KIT BRG & SEAL DANA 70 ‘U’

from

$7.99

Repleacement ring gear bolt for Dana 80. 9/16″ x 18.

Product Features:

Ring gear bolt for Dana Spicer 80
9/16″ x 18 thread

from

$26.99

Product Features:

Cross pin shaft
Fits Dana Spicer 60

from

$16.99

Product Features:

Brand may vary by location

from

$14.29

National Oil Seals & Bearings offer a full line of premium oil seals and bearings.

Product Features:

Premium bearing design matches OEM specifications
Precision manufactured using premium-grade steel for outstanding durability and performance
Crowned raceways and rollers to ensure even load distribution for maximum life
Industry leading coverage
Professional technicians know they can depend on National

Popular 1986 Ford E-350 Econoline Differentials Categories

Differential Oil

Differential Pinion Yokes

Rear Differential Cover Gaskets

Differential Open Unit and Components

Differential Covers

Differential Pinion Shaft Lock Bolts

Differential Bearings

Differential Axle Shafts

Differential Pinion Pilot Bearings

Front Housing Cover Gaskets

Differential Cover Bolts

Differential Carriers

Differential Bearing Kits

Front Differential Pinion Bearings

Differential Spider Gear Kits

Differential Rebuild Kits

Differential Carrier Shim Kits

Differential Pinion Seals

Differential Clutch Packs

Differential Ring and Pinions

Differential End Yokes

Differential Lock Assemblies

Differential Air System Seal Housings

Rear Differential Pinion Bearings

Differential Spools

Differential Carrier Bearings

Front Differential Cover Gaskets

Differential Pinion Bearing Kits

Complete Differentials

Differential Ring Gear Bolts

Bearing Race Drivers

Differential Carrier Bearing Shims

Differential Crush Sleeves

Differential Side Bearing Spacers

Differential Pinion Shims

Differential Pinion Shaft Nuts

Differential Gear Install Kits

Differential Cross Pins

Differential Side Gear Thrust Washers

Differential Pinion Bearing Baffles

Differential Pinion Gear Thrust Washers

Differential Drive Pinion Oil Deflectors

Differential Carrier Bolts

Differential Pinion Gear Washers

Differential Spider and Pinion Gear Kits

Limited Slip Differential Assemblies

Differential Clutch Pack Clips

Maybe you’re in the middle of a full rebuild of that 1986 Ford E-350 Econoline. Maybe you just need a couple of Differentials. Either way, Advance Auto Parts has 310 different Differentials in our inventory ranging from $2.99 to $1,487.99. That means you can find the exact parts or products you need to keep that 1986 Ford E-350 Econoline running smoothly.

Differentials are only as good as their brand. We stock 13 different brands to make sure you have plenty of trusted parts to choose from for your 1986 Ford E-350 Econoline. Valvoline, National, and Yukon Gear are just some of the brands we stock. Search for brands you know or compare prices and reviews to help you decide!

We know you’ll find the perfect Differentials for your 1986 Ford E-350 Econoline, but don’t take our word for it – read our customer ratings and reviews and buy with confidence. Out of the 5,684 reviews in this category, some of the top rated parts include Bearings with 4.5 stars and DIFFERENTIAL GASKET with 3.0 stars.

So if you’re in the market for aftermarket Differentials to keep your 1986 Ford E-350 Econoline rolling for years to come, look no further. Shop online and have your products shipped direct to your door, or pick up at the nearest Advance Auto Parts location today!

Differentials Brands To Make Your 1986 Ford E-350 Econoline Last

Simple repair, complete replacement, or a full rebuild. No matter the job, your 1986 Ford E-350 Econoline demands trusted brand parts and products to keep it running. Many trusted brands of Differentials make up Advance Auto Parts’ inventory, and all are ready to help make your E-350 Econoline the best it can be. Be sure to browse some of our top Differentials brands and parts.

Popular Valvoline Differentials

We carry Valvoline parts in our stock across Differential Oil categories, plus more. For a 1986 Ford E-350 Econoline, our most popular Valvoline Differentials include:

from $12.79

(446)

MaxLife Multi-Vehicle (ATF) Full Synthetic Automatic Transmission Fluid, 1 Quart

Differential Oil

FAQs for 1986 Ford E-350 Econoline Differentials

What are the most purchased Differentials for the 1986 Ford E-350 Econoline?

Out of 310 Differentials for the 1986 Ford E-350 Econoline, the most popular in our inventory are:

from $63.99

This product is not rated

Rear Differential Cover

Differential Covers

from $44.99

This product is not rated

3 Qt – Penzoil 80W90 Conventional Gear Oil

Differential Oil

from $6.99

(6)

Bearings

Differential Bearings

What are the top-rated 1986 Ford E-350 Econoline Differentials?

Top-rated Differentials for your 1986 Ford E-350 Econoline based on customer reviews/ratings are:

from $9.99

(8)

Bearings

“Fit like a glove. Sealed up the diff like mighty putty on steroids”

from $8.29

(4)

DIFFERENTIAL GASKET

“Great Product”

from $22.99

(3)

Bearings

“works great !!!”

1986 Ford E-350 Econoline Differentials

More 1986 Ford E-350 Econoline Differentials

Essential 1986 Ford E-350 Econoline Differentials

Yukon Gear – O-Ring For Dana 60 Zip Locker Seal Housing (Part No.34006)

Yukon Gear – Standard Open Spider Gear Replacement Kit For Dana 60 And 61 With 35 Spline Axles (Part No.16085)

Pro-King – Differential Bearing Cup (Part No.764A271)

Yukon Gear – Dana 60, Dana 70 & Dana 80 Cover Bolt (Part No.33235)

Yukon Gear – Dana 44 JK / 60 / 70U Pinion Nut Washer Replacement (Part No.33164)

Driveworks – Camshaft Seal (Part No.S-99139)

Motive Gear – Drive Shaft Pinion Yoke (Part No.MG1310-6010)

Yukon Gear – Replacement Inner Slinger For Dana 60 (Part No.33014)

Yukon Gear – Differential (Part No.26046)

Yukon Gear – Pinion Install Kit For Dana 80 Differential (4.375" OD Only) (Part No.13037)

Dorman – Rear Differential Cover (Part No.697-704)

Yukon Gear – 20 Long Air Line For Zip Locker (Part No.34002)

Yukon Gear – Differential Carrier (Part No.20040)

Yukon Gear – Replacement Positraction Internals For Dana 60 (Full- And Semi-Floating) With 35 Spline Axles (Part No.16088)

Yukon Gear – Bearing Race Driver (Part No.56014)

Yukon Gear – Differential (Part No.26044)

Motive Gear – Differential Master Bearing Kit – Timken (Part No.RA29RMKT)

Yukon Gear – The Carrier Bearing Puller (Part No.56034)

Yukon Gear – Replacement Yoke For Dana 60 And 70 With A 1330 U/Joint Size (Part No.41024)

Yukon Gear – Replacement Cover Gasket For Dana 50, Dana 60 & Dana 70 (Part No.23007)

Yukon Gear – Crush Sleeve (Part No.33085)

Yukon Gear – Ford 10.25" & 10.5" Cover Gasket (Part No.23008)

Yukon Gear – Dana 60 & Dana 70 Power Lok Case Bolt (Part No.33236)

Motive Gear – Differential Bearing Kit – Timken (Part No.R70URT)

Yukon Gear – Repleacement Ring Gear Bolt For Dana 80 (Part No.33039)

Yukon Gear – Replacement Cross Pin Shaft For Dana 60, Fits Standard Open And Trac Loc Posi (Part No.33314)

Driveworks – Differential Pinion Seal (Part No.S-100715-V)

National – Bearings (Part No.HM88510)

Popular 1986 Ford E-350 Econoline Differentials Categories