1986 Ford Bronco Intake Manifold Parts

Essential 1986 Ford Bronco Intake Manifold Parts

Felpro – INTAKE MANIFOLD GASKET SET (Part No.MS 90361)

INTAKE MANIFOLD GASKET SET

from

$25.99
Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust

Product Features:
  • DESIGNED FOR IMPERFECT SEALING SURFACES — Engineered and manufactured specifically for the repair environment to help seal imperfect sealing surfaces
  • SEALING TECHNOLOGIES — Exclusive sealing innovations and technologies with proprietary materials and unique design features to ensure a superior seal for your repair
  • ENGINEERING EXPERTISE — Parts are designed, reviewed, validated and approved by Fel-Pro engineers through rigorous research and development
  • REAL-WORLD TESTED — Parts are tested on-vehicle and validated to ensure optimal performance on the road
  • EVERY PART FOR THE REPAIR — Fel-Pro gasket sets include every part needed for the repair unless otherwise noted
See More

Mr. Gasket – Intake Gasket (Part No.222)

Intake Gasket

from

$38.49
Mr. Gasket Performance Intake Gaskets are manufactured from cellulose/nitrile composition gasket material. This is a low density material that conforms well to irregular surfaces and has very good crush resistance at high flange pressures. They provide excellent sealing and durability as the material is designed for sealing gasoline, oils, water and coolant in applications up to 350 degrees Fahrenheit. While die-cut for an excellent fit, they can be trimmed if necessary for modified port applications. Comes complete with front & rear manifold end seals. For original equipment replacement, high performance street, drag race and oval track.brbrFits all Ford 351M/400 – 4V or 4-Barrel heads.

Product Features:
  • Manufactured from cellulose/nitrile composition gasket material
  • Provides excellent sealing and durability
  • Die-cut for an excellent fit
  • Can be trimmed if necessary for modified port applications
  • Complete with manifold end seals
  • For OE replacement, high performance street, drag race and oval track use
See More

Felpro – Valley Pan Gasket Set (Part No.MS 96020)

Valley Pan Gasket Set

from

$44.99
Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust

Product Features:
  • DESIGNED FOR IMPERFECT SEALING SURFACES — Engineered and manufactured specifically for the repair environment to help seal imperfect sealing surfaces
  • SEALING TECHNOLOGIES — Exclusive sealing innovations and technologies with proprietary materials and unique design features to ensure a superior seal for your repair
  • ENGINEERING EXPERTISE — Parts are designed, reviewed, validated and approved by Fel-Pro engineers through rigorous research and development
  • REAL-WORLD TESTED — Parts are tested on-vehicle and validated to ensure optimal performance on the road
  • EVERY PART FOR THE REPAIR — Fel-Pro gasket sets include every part needed for the repair unless otherwise noted
See More

Felpro – INTAKE MANIFOLD GASKET SET (Part No.MS 94951)

INTAKE MANIFOLD GASKET SET

from

$31.49
Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust

Product Features:
  • DESIGNED FOR IMPERFECT SEALING SURFACES — Engineered and manufactured specifically for the repair environment to help seal imperfect sealing surfaces
  • SEALING TECHNOLOGIES — Exclusive sealing innovations and technologies with proprietary materials and unique design features to ensure a superior seal for your repair
  • ENGINEERING EXPERTISE — Parts are designed, reviewed, validated and approved by Fel-Pro engineers through rigorous research and development
  • REAL-WORLD TESTED — Parts are tested on-vehicle and validated to ensure optimal performance on the road
  • EVERY PART FOR THE REPAIR — Fel-Pro gasket sets include every part needed for the repair unless otherwise noted
See More

Felpro – Engine Intake Manifold Gasket Set (Part No.MS 90103-1)

Engine Intake Manifold Gasket Set

from

$25.99
Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust

Product Features:
  • DESIGNED FOR IMPERFECT SEALING SURFACES — Engineered and manufactured specifically for the repair environment to help seal imperfect sealing surfaces
  • SEALING TECHNOLOGIES — Exclusive sealing innovations and technologies with proprietary materials and unique design features to ensure a superior seal for your repair
  • ENGINEERING EXPERTISE — Parts are designed, reviewed, validated and approved by Fel-Pro engineers through rigorous research and development
  • REAL-WORLD TESTED — Parts are tested on-vehicle and validated to ensure optimal performance on the road
  • EVERY PART FOR THE REPAIR — Fel-Pro gasket sets include every part needed for the repair unless otherwise noted
See More

Dorman – Brass Cup Expansion Plug 25.73mm SC, Height 0.270 (sold by each) (Part No.565-018)

Brass Cup Expansion Plug 25.73mm SC, Height 0.270 (sold by each)

from

$1.99
This engine intake manifold expansion plug is designed to match the fit and function of the original part on specified vehicles. Made of quality materials, it is engineered for reliable performance.

Product Features:
  • Direct replacement – this engine intake manifold expansion plug matches the fit and function of the factory part on specified years, makes and models
  • Ideal solution – this plug is a reliable replacement for an original part that is missing or has failed due to fatigue
  • Durable construction – this part is made from quality materials to ensure reliable performance and long service life
  • Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience
See More

Dorman – Pik-a-Nut – Steel Cup Expansion Plug 1-41/64 In., Height 0.360 (Part No.362660.1)

Steel Cup Expansion Plug 1-41/64 In., Height 0.360

from

$2.29
This engine expansion plug is designed to match the fit and function of the original part on specified vehicles. Made of quality materials, it is engineered for reliable performance.

Product Features:
  • Direct replacement – this engine expansion plug matches the fit and function of the factory part on specified years, makes and models
  • Ideal solution – this plug is a reliable replacement for an original part that is missing or has failed due to fatigue
  • Durable construction – this part is made from quality materials to ensure reliable performance and long service life
  • Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience
See More

Edelbrock – Engine Intake Manifold Spacer #8728 For Manifold Part #2945, 3887 (Part No.8728)

Engine Intake Manifold Spacer #8728 For Manifold Part #2945, 3887

from

$181.99


Product Features:
  • Fiber Laminate Spacers
  • Provide Heat Insulation Between Upper and Lower
  • Creates Cooler/Denser Charge
  • Raise Intake 0.5in. For More Valve Cover Clearance
  • Includes all Necessary Hardware for Installation
See More

Carquest Premium – Air Charge Temperature Sensor (Part No.WTA1289)

Air Charge Temperature Sensor

from

$31.99
CARQUEST premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.
See More

Carquest Premium – Air Charge Temperature Sensor (Part No.WTA1083)

Air Charge Temperature Sensor

from

$19.99
CARQUEST premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.
See More

Edelbrock – Single-Quad Manifold and carb Kit for Small-Block Ford 289-302 (Part No.2033)

Single-Quad Manifold and carb Kit for Small-Block Ford 289-302

from

$1053.99
The Edelbrock #2033 Single-Quad Manifold and carb kit is designed for Small-Block Ford 289-302 applications. With a Manifold and Carb Kit, it’s easy to upgrade your induction system with the best combination of Edelbrock proven performance and looks in a

Product Features:
  • Satin Finish
  • Single-Quad Manifold
  • Thunder Series AVS2 800 cfm Carb
  • RPM Air-Gap Manifold
  • Made In The USA
See More

Edelbrock – RPM Dual-Quad manifold and carb Kit for Small-Block Ford 289-302 (Part No.2035)

RPM Dual-Quad manifold and carb Kit for Small-Block Ford 289-302

from

$1796.99
Varying manifold and carburetor combinations. Suits engines air and fuel requirements. High quality Edelbrock intake gasket set. Includes gasgacinch gasket sealer. All necessary hardware included. Resists discoloration from heat. Available in cast, polish

Product Features:
  • Varying Manifold And Carburetor Combinations
  • Suits Engines Air/Fuel Requirements
  • Chrome Fuel Inlet
  • High-Quality Edelbrock Intake Gasket Set
  • Includes Gasgacinch Gasket Sealer
  • All Necessary Hardware Included
  • EnduraShine Finish
  • Resists Discoloration From Heat
See More

Edelbrock – RPM Air-Gap Dual-Quad Small Block Ford 351W Intake Manifold (Part No.7585)

RPM Air-Gap Dual-Quad Small Block Ford 351W Intake Manifold

from

$566.99
Air gap cooler and denser mixture for more power. Street and high performance compatible. Available in cast, polished and endurashine finish.

Product Features:
  • Based on C26 Low Profile with Unique Air Gap
  • Air Gap Cooler and Denser Mixture for More Power
  • 1.625 in. Taller Than Low-Profile PN[5425]
  • Also Available In EnduraShine Finish PN[75254]
  • Also Available As Complete Kit PN[2025/20254]
  • Best When Matched with Edelbrock 500cfm Carburetor
  • Use Fuel Line Kit PN[8088/8091]
  • Use Progressive Throttle Linkage Kit PN[7094]
See More

Edelbrock – Performer Truck 5.8L Intake Manifold Small-Block Ford (Part No.3881)

Performer Truck 5.8L Intake Manifold Small-Block Ford

from

$1078.99


Product Features:
  • For Idle to 5500 RPM Street-Driven Performance
  • Produced 34 ft/lbs. More Torque than Stock
  • Removable Plenum Cover for Runner Access
  • Base Manifold is CNC Matched to Upper Manifold
  • 50 State Street Legal for 1988 to 96 5.8L Engines
  • Upper Manifold ; Cover Powder-Coated Titanium Gray
  • Accepts All Stock Hardware
  • Match w/Other Power Packages for More Performance
See More

Edelbrock – Performer Intake Manifold Small-Block Ford (Part No.3721)

Performer Intake Manifold Small-Block Ford

from

$394.99


Product Features:
  • For Idle to 5500 RPM Street-Driven Performance
  • Dual-Plane Low-Rise Intake w/180 deg. Firing Order
  • Patented Runner Design Ensures Broad Torque Curve
  • Excellent Throttle Response and Mid-Range Power
  • 50-State Street Legal if Correct Carburetor Used
See More

1986 Ford Bronco Intake Manifold Parts

Maybe you’re in the middle of a full rebuild of that 1986 Ford Bronco. Maybe you just need a couple of Intake Manifold Parts. Either way, Advance Auto Parts has 12 different Intake Manifold Parts in our inventory ranging from $2.29 to $1,796.99. That means you can find the exact parts or products you need to keep that 1986 Ford Bronco running smoothly.

Intake Manifold Parts are only as good as their brand. We stock 6 different brands to make sure you have plenty of trusted parts to choose from for your 1986 Ford Bronco. Felpro, Carquest Premium, and Holley are just some of the brands we stock. Search for brands you know or compare prices and reviews to help you decide!

We know you’ll find the perfect Intake Manifold Parts for your 1986 Ford Bronco, but don’t take our word for it – read our customer ratings and reviews and buy with confidence.

So if you’re in the market for aftermarket Intake Manifold Parts to keep your 1986 Ford Bronco rolling for years to come, look no further. Shop online and have your products shipped direct to your door, or pick up at the nearest Advance Auto Parts location today!

Intake Manifold Parts Brands To Make Your 1986 Ford Bronco Last

Simple repair, complete replacement, or a full rebuild. No matter the job, your 1986 Ford Bronco demands trusted brand parts and products to keep it running. Many trusted brands of Intake Manifold Parts make up Advance Auto Parts’ inventory, and all are ready to help make your Bronco the best it can be. Be sure to browse some of our top Intake Manifold Parts brands and parts.

Popular Holley Intake Manifold Parts

We carry Holley parts in our stock across Intake Manifold Gasket Sets categories, plus more. For a 1986 Ford Bronco, our most popular Holley Intake Manifold Parts include:
SysteMAX; Intake Manifold Gasket
from $48.99
(1)
SysteMAX; Intake Manifold Gasket
Intake Manifold Gasket Sets

Top 1986 Ford Bronco Intake Manifold Parts from Felpro

Felpro products are another trusted brand when it comes to Intake Manifold Parts for your 1986 Ford Bronco. Popular Felpro parts include:
INTAKE MANIFOLD GASKET SET
from $25.99
(8)
INTAKE MANIFOLD GASKET SET
Intake Manifold Gasket Sets
INTAKE MANIFOLD GASKET SET
from $31.49
(6)
INTAKE MANIFOLD GASKET SET
Intake Manifold Gasket Sets

FAQs for 1986 Ford Bronco Intake Manifold Parts

What are the most purchased Intake Manifold Parts for the 1986 Ford Bronco?

Out of 12 Intake Manifold Parts for the 1986 Ford Bronco, the most popular in our inventory are:
Air Charge Temperature Sensor
from $19.99
This product is not rated
Air Charge Temperature Sensor
Intake Manifold Temperature Sensors
Steel Cup Expansion Plug 1-41/64 In., Height 0.360
from $2.29
This product is not rated
Steel Cup Expansion Plug 1-41/64 In., Height 0.360
Intake Manifold Expansion Plugs
Intake replacement base and upper plenum gasket for #2945 & #3887
from $20.99
This product is not rated
Intake replacement base and upper plenum gasket for #2945 & #3887
Intake Manifold Gasket Sets