from

$67.99

Pinion and axle seal puller. No return.

Product Features:

Seal puller

from

$18.79

Providing reliable service in applications requiring molded hoses, the Dayco heater hose is designed to replace OEM coolant hoses. Made with the same bends and routing as the original assembly, this molded hose is meant to fit the vehicle precisely. The knitted reinforcement and synthetic EPDM construction provide high-strength performance and resistance to detrimental environmental elements, coolants and temperature variations of -40°F (-40°C) to +257°F (+125°C) and the “quick connect” end allows for fast, convenient installation.

Product Features:

Meets the requirements of SAE J20R3, Class D-1
Designed to meet Type EC electro-chemical requirements as specified in SAE J1684, which prevents inner tube deterioration caused by the build-up of static electric charges
Engineered as an OEM replacement
Meets Type EC electro-chemical requirements as specified in SAE J1684

from

$14.99

Gates Small I.D. Molded Coolant Hose is factory-molded, OEM style hose to fit today’s smaller, tighter-fitting engine compartments. Can be used for coolant, water and air applications. Approved for marine applications.

Product Features:

Has all the quality features of Gates molded coolant hose and similar to OEM specifications
Engineered to resist electrochemical degradation ┐ the leading cause of hose failure
EPDM tube, synthetic fiber knit reinforcement, EPDM cover
Meets SAE 20R3 Type EC Class D-1 and D-2 specifications
Temperature Range: -40 Deg. F to 275 Deg. F (-40 Deg. C -135 Deg. C)
Note: Gates recommends replacing hose clamps each time a new coolant hose is installed
Caution: Do not use for fuel or oil transfer applications

from

$48.99

The Dayco poly-V aramid belt is engineered to maintain a quiet, vibration-free belt drive system, especially for higher output OE engines that require an aramid belt. Unlike polyester-corded belts, this aramid cord belt is designed to resist the expected elongations, especially during high accessory loading. This unique feature of length stability and minimal stretch aids in difficult drives where span vibrations and tensioner movements are excessive. The Dayco aramid cord poly rib belt is built with Dayco’s specially designed EPDM rubber compounds to resist cracking and perform better under extreme temperature ranges.

Product Features:

Designed for applications with an OEM aramid belt and is specifically helpful for those with noise, vibration or harshness issues, or in-drive systems in which tensioner take-up is minimal
Length stability resists excessive span vibrations or tensioner movements
Features special compounds that resist cracking and perform well under intense engine temperatures

from

$58.99

Constructed with aramid reinforced EPDM compounds, the Dayco poly-V serpentine belt delivers more than just OE quality. Developed through extensive laboratory and road testing, the rib profile in this EPDM belt has been engineered to conform to high mile

Product Features:

Provides full coverage for today’s light-duty vehicle market, especially vehicles with troublesome drives
Engineered to help address noise issues caused by the belt drive
Capable of handling more extreme temperatures and workloads

from

$79.99

Metal line kit for engine oil coolers. Routes oil lines past exhaust manifolds.

Product Features:

Metal line kit
For use in engine oil cooler applications
Routes oil lines past exhaust manifolds
Provides protection where standard hoses can fail

from

$48.49

1/2″ x 12′ engine oil cooler hose. Imperial engine hose is specifically designed for engine cooling applications.

Product Features:

Engine oil cooler hose
Size: 1/2″ x 12′
Designed for engine oil applications
12′ hose length accommodates most applications

from

$12.49

This accessory drive belt tensioner pulley is designed to match the fit and function of the original pulley on specified applications. Made of quality materials, it is engineered for reliable performance and durability.

Product Features:

Direct replacement – this accessory drive belt tensioner pulley is designed to match the fit and function of the original pulley on specified applications
Restores functionality – reliable replacement for an original pulley that has failed due to vibration or corrosion
Durable construction – this part is made from quality materials to ensure reliable performance and long service life
Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience

from

$40.99

Product Features:

Steel and thermoplastic construction designed to tight manufacturing tolerances for high durability and quality performance
Built to last with a superior resistance to dirt, salt, chemicals and other under-hood contaminants
OE-quality fit for virtually every domestic or import vehicle on the road today
Bearings meet or exceed OE standards with application-specific speed and load requirements, to withstand high under hood temperatures
Premium bearings eliminate bearing noise
Mounting hardware included for some popular applications
Reliable operation under severe conditions

from

$32.49

Dayco idler/tensioner pulleys are built with smoother surfaces and tighter dimensional tolerances, which translates to less vibration and longer belt life. In addition to stamped, forged steel and powdered metal pulleys, Dayco also designs ultra-strong plastic pulleys with specially formulated glass-filled polymers that resist wear and tear. Premium lubricated ball bearings and double high temperature seals ensure peak bearing performance, the most critical element of a pulley’s service life.

Product Features:

Designed for the majority of automotive vehicle applications on the road today
High-quality materials help resist wear and improve belt life
Features premium lubricated bearings to extend service life
Meets or exceeds OE quality

from

$17.79

Gates Vulco-Flex(R) II hose will bend in almost any direction. It easily replicates the angles and planes of a wide variety of expensive original equipment coolant hose, for quick, easy replacement.

Product Features:

Improved sealing surface for greater leak resistance
High flexibility for easy installation
Maximum vehicle coverage with minimum inventory
Resistant to heat, oil and ozone
Rated for SAE 20R5 Class D-2 performance
Temperature Range: up to +257 Deg. F (+125 Deg. C)
Note: Gates recommends replacing clamps each time a new coolant hose is installed
Caution: Do not use for fuel or oil transfer applications

from

$19.79

The Dayco curved radiator hose features knitted reinforcement, a protective sleeve and a synthetic EPDM rubber construction for high-strength performance, protection against abrasion and resistance to oil, mud, salt, road debris, ozone and coolants. It can also withstand temperature variations of -40 Deg. F (-40 Deg. C) to +257 Deg. F (+125 Deg. C). The inner base tube is reinforced with knitted rayon for maximum strength and burst resistance for the life of the hose.

Product Features:

Meets SAE J20R4, Class D-1 requirements
Meets Type EC electro-chemical requirements as specified in SAE J1684, which prevents inner tube deterioration caused by the build-up of static electric charges
Provides excellent protection against external elements

from

$11.79

The Dayco curved radiator hose features knitted reinforcement, a protective sleeve and a synthetic EPDM rubber construction for high-strength performance, protection against abrasion and resistance to oil, mud, salt, road debris, ozone and coolants. It can also withstand temperature variations of -40 Deg. F (-40 Deg. C) to +257 Deg. F (+125 Deg. C). The inner base tube is reinforced with knitted rayon for maximum strength and burst resistance for the life of the hose.

Product Features:

Meets SAE J20R4, Class D-1 requirements
Meets Type EC electro-chemical requirements as specified in SAE J1684, which prevents inner tube deterioration caused by the build-up of static electric charges
Provides excellent protection against external elements

from

$13.49

This accessory drive belt tensioner pulley is designed to match the fit and function of the original pulley on specified applications. Made of quality materials, it is engineered for reliable performance and durability.

Product Features:

Direct replacement – this accessory drive belt tensioner pulley is designed to match the fit and function of the original pulley on specified applications
Restores functionality – reliable replacement for an original pulley that has failed due to vibration or corrosion
Durable construction – this part is made from quality materials to ensure reliable performance and long service life
Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience

from

$51.99

Dayco idler/tensioner pulleys are built with smoother surfaces and tighter dimensional tolerances, which translates to less vibration and longer belt life. In addition to stamped, forged steel and powdered metal pulleys, Dayco also designs ultra-strong pl

Product Features:

Designed for the majority of automotive vehicle applications on the road today
High-quality materials help resist wear and improve belt life
Features premium lubricated bearings to extend service life
Meets or exceeds OE quality

from

$32.49

This Litens pulley is manufactured by one of the largest original equipment pulley suppliers to ensure proper fit and performance. This pulley is produced for serpentine belt routing applications and conforms to original equipment material, tolerances, and specifications. This replacement part is made in the U.S.A. to the O.E. specified design and meets all performance and durability requirements. Heavy duty steel construction. Litens is the world’s largest supplier of original equipment (O.E.) power transmission products. At Litens, we design systems that are more efficient, resulting in tangible fuel economy/emissions benefits. Litens holds over 2000 patents and continues to respond to the ever-changing automotive industry by investing heavily in new technology, facilities, and people. 90% of our line is made of products coming from the OE manufacturer, which makes the Litens Tensioning Products portfolio the purest OE tensioning line in the North American aftermarket.

from

$24.49

The Dayco curved radiator hose features knitted reinforcement, a protective sleeve and a synthetic EPDM rubber construction for high-strength performance, protection against abrasion and resistance to oil, mud, salt, road debris, ozone and coolants. It can also withstand temperature variations of -40 Deg. F (-40 Deg. C) to +257 Deg. F (+125 Deg. C). The inner base tube is reinforced with knitted rayon for maximum strength and burst resistance for the life of the hose.

Product Features:

Meets SAE J20R4, Class D-1 requirements
Meets Type EC electro-chemical requirements as specified in SAE J1684, which prevents inner tube deterioration caused by the build-up of static electric charges
Provides excellent protection against external elements

from

$21.79

The Dayco flex radiator hose replaces straight or molded radiator hoses on a wide range of engine applications. Precision molded in standard lengths, it features a knitted reinforcement and synthetic EPDM construction. This hose is designed to prevent spl

Product Features:

Designed to meet OE specifications
Not suitable for oil or heat transfer
Meets SAE J20R4, Class D-2 requirements for improved service hoses
This hose is designed to prevent splitting, ballooning, and elongation

from

$19.49

The Dayco flex radiator hose replaces straight or molded radiator hoses on a wide range of engine applications. Precision molded in standard lengths, it features a knitted reinforcement and synthetic EPDM construction. This hose is designed to prevent spl

Product Features:

Designed to meet OE specifications
Not suitable for oil or heat transfer
Meets SAE J20R4, Class D-2 requirements for improved service hoses
This hose is designed to prevent splitting, ballooning, and elongation

from

$11.49

The Dayco curved radiator hose features knitted reinforcement, a protective sleeve and a synthetic EPDM rubber construction for high-strength performance, protection against abrasion and resistance to oil, mud, salt, road debris, ozone and coolants. It can also withstand temperature variations of -40 Deg. F (-40 Deg. C) to +257 Deg. F (+125 Deg. C). The inner base tube is reinforced with knitted rayon for maximum strength and burst resistance for the life of the hose.

Product Features:

Meets SAE J20R4, Class D-1 requirements
Meets Type EC electro-chemical requirements as specified in SAE J1684, which prevents inner tube deterioration caused by the build-up of static electric charges
Provides excellent protection against external elements

from

$20.49

The Dayco flex radiator hose replaces straight or molded radiator hoses on a wide range of engine applications. Precision molded in standard lengths, it features a knitted reinforcement and synthetic EPDM construction. This hose is designed to prevent spl

Product Features:

Designed to meet OE specifications
Not suitable for oil or heat transfer
Meets SAE J20R4, Class D-2 requirements for improved service hoses
This hose is designed to prevent splitting, ballooning, and elongation

from

$58.99

Product Features:

Improved sealing surface for greater leak resistance
High flexibility for easy installation
Maximum vehicle coverage with minimum inventory
Resistant to heat, oil and ozone
Rated for SAE 20R5 Class D-2 performance
Temperature Range: up to +257 Deg. F (+125 Deg. C)
Note: Gates recommends replacing clamps each time a new coolant hose is installed
Caution: Do not use for fuel or oil transfer applications

from

$5.29

The Driveworks V-Belt is manufactured with top quality components to deliver the maximum power and performance on all passenger cars and light duty trucks in service today.

Product Features:

This belt is made with bottom cogs to provide the maximum flexibility and grip required on v-belt drives
Polyester cords provide extreme tension-holding capability for longer belt life
The raw edge belt design delivers the maximum gripping power
The highly engineered rubber compounds are resistant to under hood heat and ozone deterioration

from

$24.49

Dayco has combined raw-edge construction and a smooth top to ensure high performance on vehicles and drives that utilize V-belts. The Dayco high performance V-belt delivers more flexibility and increases airflow around the belt so it runs cooler and lasts longer. Three plies of neoprene impregnated fabric resist heat, oil and grease while a specially-formulated treatment of the polyester cord provides the strength, stability and reliability that are required for one of the most innovative, top-performing V-belts.

Product Features:

Provides greater durability and flexibility – 35% stronger than all previous versions
Prevents electromechanical interference issues on modern vehicles
Resists heat, oil and grease

from

$20.79

Dayco has combined raw-edge construction and a smooth top to ensure high performance on vehicles and drives that utilize V-belts. The Dayco high performance V-belt delivers more flexibility and increases airflow around the belt so it runs cooler and lasts longer. Three plies of neoprene impregnated fabric resist heat, oil and grease while a specially-formulated treatment of the polyester cord provides the strength, stability and reliability that are required for one of the most innovative, top-performing V-belts.

Product Features:

Provides greater durability and flexibility – 35% stronger than all previous versions
Prevents electromechanical interference issues on modern vehicles
Resists heat, oil and grease
Made with specially formulated rubber compounds, this belt is highly resistant to extreme under hood temperatures that can cause premature damage to under engineered rubber compounds

from

$89.99

Litens was the Original Equipment (O.E.) supplier of this Corvette tensioner. While the appearance is slightly different from the Original due to performance upgrades, this redesigned aftermarket tensioner meets and surpasses all original equipment form, fit, and function specifications. Choosing The Correct Replacement Part: Both the original equipment and Litens aftermarket tensioner use a round spring versus a flat spring and are marked “Made in Canada”. Litens is the world’s largest supplier of original equipment (O.E.) power transmission products. At Litens, we design systems that are more efficient, resulting in tangible fuel economy/emissions benefits. Litens holds over 2000 patents and continues to respond to the ever-changing automotive industry by investing heavily in new technology, facilities, and people. 90% of our line is made of products coming from the OE manufacturer, which makes the Litens Tensioning Products portfolio the purest OE tensioning line in the North American aftermarket.

from

$56.99

Dayco No Slack Automatic Belt Tensioners are specifically built to outperform and outlast competitive OE parts. Each component is built to endure the toughest of conditions while promoting quieter performance and longer life.

Product Features:

The heavy duty cast aluminum spring case resists cracking and fatigue
Includes installation instructions
Meet or exceed OE quality
Rust resistant construction

from

$55.99

The Dayco automatic belt tensioner features Dayco’s original, patented flat spring design to provide less operating range variation. It reduces the risk of premature accessory bearing failure due to high tension and lessens the risk of belt noise and slip

Product Features:

Endures the toughest conditions while promoting quieter performance and longer life
Features a steel pivot tube on specific designs for enhanced stability
Built to outperform and outlast competitive OE parts
Rust resistant construction

1986 Chevrolet Corvette Belts and Hoses

More 1986 Chevrolet Corvette Belts and Hoses Categories

Essential 1986 Chevrolet Corvette Belts and Hoses

Yukon Gear – Seal Puller Tool (Part No.56063)

Dayco – Molded Heater Hose; EPDM Rubber, 5/8 Inch Diameter, 24 Inch Length (Part No.80404)

Gates – Premium Molded Heater Hose (Part No.18030)

Dayco – Aramid Cord Poly Rib Belt Serpentine Belt; 85.12 Long, 8 Rib Count (Part No.A080851)

Dayco – Poly Rib Belt Serpentine Belt; 92.32 Long, 6 Rib Count (Part No.5060923)

Imperial – Metal Line Kit for Engine Oil Coolers (Part No.240293)

Imperial – 1/2" x 12′ Engine Oil Cooler Hose (Part No.240112)

Dorman – Idler Pulley (Pulley only) (Part No.419-610)

Gates – DriveAlign½ Belt Drive Idler/Tensioner Pulley (Part No.38015)

Dayco – Serpentine Idler/Tensioner Pulley; 63.3 mm Dia., 17.75 mm Smooth (Part No.89135)

Gates – Vulco-Flex« II Flexible Coolant Hose (Part No.25477)

Dayco – Curved Radiator Hoses: EPDM Rubber, Standard Duty, 20.75" Long, 1.50" Diameter (Part No.E70863)

Dayco – Curved Radiator Hoses: EPDM Rubber, Standard Duty, 9" Long, 1.31" Diameter (Part No.B70704)

Dorman – Idler Pulley (Pulley only) (Part No.419-602)

Dayco – Serpentine Idler/Tensioner Pulley; Steel, 76mm Dia., 28mm Width, Smooth (Part No.89059)

Litens – O.E Quality Idler/Tensioner Pulley: Direct Fit, Steel, 76 mm Diameter (Part No.900022A)

Dayco – Curved Radiator Hoses: EPDM Rubber, Standard Duty, 17" Long, 1.25" Diameter (Part No.D71983)

Dayco – Flex Radiator Hoses; EPDM Rubber, 16.5 Inch Long, 1.75 Inch Inner Dia. (Part No.81331)

Dayco – Flex Radiator Hoses; EPDM Rubber, 15.75 Inch Long, 1.5 Inch Inner Dia. (Part No.81161)

Dayco – Curved Radiator Hoses: EPDM Rubber, Standard Duty, 8" Long, 1.75" Diameter (Part No.B70192)

Dayco – Flex Radiator Hoses; EPDM Rubber, 17.25 Inch Long, 1.5 Inch Inner Dia. (Part No.81171)

Gates – Vulco-Flex½ II Flexible Coolant Hose (Part No.25311)

Driveworks – Automotive V-Belt (Part No.43013)

Dayco – Bottom Cog V-Belt; 46.5 Inch Long, Exact Fit Premium Quality (Part No.15465)

Dayco – Bottom Cog V-Belt; 54 Inch Long, Exact Fit Premium Quality (Part No.15540)

Litens – Serpentine Belt Tensioner: 1 Piece (Part No.999588A)

Dayco – Belt Tensioner (Part No.89337)

Dayco – Serpentine Belt Tensioner: 1 Piece, HD, Built To Outperform And Outlast OE Parts (Part No.89339)

Popular 1986 Chevrolet Corvette Belts and Hoses Categories

1986 Chevrolet Corvette Belts and Hoses

Top-Rated Belts and Hoses Brands For Your 1986 Chevrolet Corvette

Popular Driveworks Belts and Hoses

Top-Rated Dayco Belts and Hoses

FAQs for 1986 Chevrolet Corvette Belts and Hoses

What are the most purchased Belts and Hoses for the 1986 Chevrolet Corvette?

What are the top-rated 1986 Chevrolet Corvette Belts and Hoses?

More Popular Parts for All Makes