1986 Chevrolet Camaro Suspension Parts

Essential 1986 Chevrolet Camaro Suspension Parts

Rare Parts – Coil Springs (Part No.RP45405)

Coil Springs

from

$166.99
Coil Springs

Rare Parts – Coil Springs (Part No.RP45407)

Coil Springs

from

$145.99
Coil Springs

Firestone Ride-Rite – Portable, Maximum 130 Psi, 18 Amps, With Compressor Only (Part No.9284)

Portable, Maximum 130 Psi, 18 Amps, With Compressor Only

from

$251.99
The Air Command Standard Duty Dual Electric Air Compressor System Kit Allows You To Adjust Your Air Springs With The Touch Of A Button. It Offers A Built in Air Source For Your Suspension System, Making It Easy To Alter Your Springs To Align With The Load Type And Environment. When Shopping For Air Accessories, You will Find That Firestone Air Command Standard Duty Dual Electric Air Compressor System Kit Is Designed To Have A Couple Of Special Benefits. First, The Air Command Standard Duty Dual Electric Air Compressor System Kit Comes Ready To Install, So You Can Set It Up And Get Back To The Road where You Want To Be. Just Connect A Few Wires To The Compressor And A Few To Your Vehicle. The Air Lines And Wiring Harness Can Be Plugged Into The Same Side Of The Unit For Smoother Routing Of Lines And Power Supply. After The Air Command Standard Duty Dual Electric Air Compressor System Kit Is Properly Installed, You Can Make Pressure Adjustments By Pressing A Single Button. This Air Command Standard Duty Dual Electric Air Compressor System Kit Component Allows For Side To Side Or Front to rear Leveling, Real time Pressure Readout, And Dual Left And Right PSI And Pressure Control Readouts. The Air Command Standard Duty Dual Electric Air Compressor System Kit Easy to read Needle Gauge Can Be Viewed Day Or Night, Without Straining Or Squinting Your Eyes. Prior To Installing The Air Command Standard Duty Dual Electric Air Compressor System Kit, Review The Instructions And Identify All Of The Components To Help Make Sure You Get Maximum Performance From Both Your Air Springs And Air Command Standard Duty Dual Electric Air Compressor System Kit. The Installation Steps Are Different Depending On Whether You are Enhancing An Existing Air Helper Spring System With The Air Command Standard Duty Dual Electric Air Compressor System Kit Or Installing It With A New Air Spring System.

Product Features:
  • Individual Air Accessory Components Are Also Available, Including Compressors, Air Tanks, And Mounting Solutions, Providing A Wide Variety Of Air Control Assist Solutions
  • Adjust The Ride For Various Load And Road Conditions With A Switch, Remote Or Mobile App
  • Provides An Instant Air Source For The Air Helper Springs Or Accessories
  • Dual Point Fill (Both Air Springs Fill Independently Of Each Other)
  • Light Duty Compressor Specs (120 PSI Max Air Pressure, 9 Percent Duty Cycle, 0.32 CFM)
See More

MOOG – Coil Spring Set (Part No.6312)

Coil Spring Set

from

$157.99
By constantly introducing design enhancements that extend product life and simplify installation and replacement, MOOG has earned its reputation as the chassis industry’s Problem Solver.

Product Features:
  • 100% Load tested
  • Easy to install
  • Provides like-new steering
  • Designed to lower stresses for longer service life
  • Worn or sagging coil springs can cause premature tire wear due to vehicle misalignment
See More

MOOG – Coil Spring Set (Part No.5610)

Coil Spring Set

from

$145.99
By constantly introducing design enhancements that extend product life and simplify installation and replacement, MOOG has earned its reputation as the chassis industry’s Problem Solver.

Product Features:
  • 100% Load tested
  • Easy to install
  • Provides like-new steering
  • Designed to lower stresses for longer service life
  • Worn or sagging coil springs can cause premature tire wear due to vehicle misalignment
See More

Driveworks – Control Arm Bushing (Part No.DW-K6076B)

Control Arm Bushing

from

$10.79
Control Arm Bushing

Driveworks – CONTROL ARM BUSHING (Part No.DW-K3113B)

CONTROL ARM BUSHING

from

$11.49
CONTROL ARM BUSHING

Monroe – OESpectrum Strut (Part No.72337)

OESpectrum Strut

from

$142.99
Designed to restore a vehicle’s original factory drivability and performance, Monroe® OESpectrum® struts provide an exceptional level of handling precision and control while filtering out noise, vibration and harshness.

Product Features:
  • REDUCED NOISE, VIBRATION AND HARSHNESS — Twin Technology Active Control System delivers exceptional control under most driving conditions while isolating impact-related noise, vibration and harshness
  • EXCEPTIONAL HANDLING — Rod displaced valving, tuned specifically to each vehicle, adjusts to road extremes to provide consistency and a smooth ride (on most applications)
  • CONSISTENT RIDE — OE all-weather fluid contains special additives to assist with extreme temperatures and help reduce oil breakdown
  • CONTROL AND DURABILITY — Fluon-banded piston provides consistent sealing between piston and pressure tube for better control and increased durability
  • IMPROVES PERFORMANCE — Nitrogen gas charge maintains tire-to-road contact for improved ride and handling by reducing aeration (on most applications)
  • LONGER SERVICE LIFE — Chrome-plated piston, bronze reinforced rod guide bearing and special single lip seal provide durability and longer service life (where applicable)
  • OPTIONAL DUST BOOT/JOUNCE BUMPER — Protective dust boot reduces dirt and moisture, while jounce bumper reduces severe suspension movement (both sold separately)
See More

Monroe – OESpectrum Strut (Part No.72336)

OESpectrum Strut

from

$142.99
Designed to restore a vehicle’s original factory drivability and performance, Monroe® OESpectrum® struts provide an exceptional level of handling precision and control while filtering out noise, vibration and harshness.

Product Features:
  • REDUCED NOISE, VIBRATION AND HARSHNESS — Twin Technology Active Control System delivers exceptional control under most driving conditions while isolating impact-related noise, vibration and harshness
  • EXCEPTIONAL HANDLING — Rod displaced valving, tuned specifically to each vehicle, adjusts to road extremes to provide consistency and a smooth ride (on most applications)
  • CONSISTENT RIDE — OE all-weather fluid contains special additives to assist with extreme temperatures and help reduce oil breakdown
  • CONTROL AND DURABILITY — Fluon-banded piston provides consistent sealing between piston and pressure tube for better control and increased durability
  • IMPROVES PERFORMANCE — Nitrogen gas charge maintains tire-to-road contact for improved ride and handling by reducing aeration (on most applications)
  • LONGER SERVICE LIFE — Chrome-plated piston, bronze reinforced rod guide bearing and special single lip seal provide durability and longer service life (where applicable)
  • OPTIONAL DUST BOOT/JOUNCE BUMPER — Protective dust boot reduces dirt and moisture, while jounce bumper reduces severe suspension movement (both sold separately)
  • Special Dust Boot/Jounce Bumper: Protective dust boot reduces dirt and any moisture build-up. Jounce bumper helps prevent severe suspension movement. Dust boot & jounce bumper sold separately.
See More

TRW – Control Arm Stop (Part No.L2060451692TRW)

Control Arm Stop

from

$12.22
TRW sets the standard within the Aftermarket, with tests that go beyond the ordinary to ensure every chassis part we produce meets stringent vehicle manufacturer quality standards, in line with the Original Equipment specification. To help make sure that our parts can go the distance, TRW utilizes on the road tests and the most advanced test machines available, in both our Original Equipment and Aftermarket facilities as well as by independent testing labs. So you can be sure that TRW parts are tested for your safety. The TRW Control Arm Stop is a direct fit OEM replacement that contains the same high quality craftsmanship and materials as the original equipment they replace.

Product Features:
  • OE-Equivalent and a direct fit application.
  • Meets or exceeds the OE specifications.
  • Acoustic measurements to ensure driver comfort
  • Strength tests for durability
  • Environmental resistance tests for all weather conditions
  • Wear and drive tests
  • Assembly technique testing of all critical safety features
  • Dynamic testing of complete units to ensure leak free performance
  • Extensive on-road testing at TRW tracks around the world
See More

Rare Parts – Control Arm Bumper (Part No.RP22455)

Control Arm Bumper

from

$29.49
This high quality chassis part will improve overall vehicle handling, reduce tire wear and increase the life of other steering and suspension components. These chassis parts are manufactured to meet or exceed OEM.

Product Features:
  • Reduces vibration
  • Torsional rubber bushings
  • UV resistant
  • No Squeak
See More

Valvoline – Transfer Case Fluid, 1 Quart (Part No.855459)

Transfer Case Fluid, 1 Quart

from

$14.99
Valvoline Multi-Vehicle Transfer Case Fluid is a full synthetic product meeting the performance needs for transfer cases recommending Ford XL-12 and GM Auto Trak II specifications or ATF fluids (DEX/MERC, ATF +4, etc).

Product Features:
  • Recommended for use in most Ford, GM and FCA (Dodge, Jeep) models
  • Formulated to help prevent gear wear and protect against rust and corrosion
  • Formulated to deliver enhanced protection against deposits
  • Helps provide better protection during extreme operating conditions
See More

Valvoline – DEX/MERC ATF Conventional Automatic Transmission Fluid, 1 Quart (Part No.798153)

DEX/MERC ATF Conventional Automatic Transmission Fluid, 1 Quart

from

$11.99
Valvoline DEX/MERC ATF is a high-quality transmission fluid formulated to meet the challenging demands many automatic transmissions. Its responsive low-temperature fluidity is beneficial in both electronic and hydraulic controlled transmissions and transaxles. Recommended for use in the following applications: MERCON®, DEXRON®-III, Ford M2C138-CJ and M2C166-H, Allison C-4 and TES-389, and Caterpillar TO-2.

Product Features:
  • Formulated with premium base stocks and advanced additive technology to meet the challenging demands of automatic transmissions.
  • Enhanced anti-shudder protection for smooth shifting and maximum power transfer
  • Developed with anti-wear technology to help improve transmission durability
  • Engineered with a proprietary blend of base oils and advanced additives to provide better oil flow at low temperatures and greater film protection at higher temperatures
See More

Monroe – Max-Air Air Shock Absorber (Part No.MA711)

Max-Air Air Shock Absorber

from

$158.99
Ideal for hauling, Monroe® Max-Air® shock absorbers can be inflated or deflated up to 150 PSI to maintain level height with additional weight up to 1,200 lbs. (capacity is limited by vehicle suspension, tires and transmission. See vehicle owner’s manual.)

Product Features:
  • MAINTAIN RIDE HEIGHT UNDER LOAD — Air chamber can be inflated or deflated up to 150 PSI to maintain level height with additional weight up to 1,200 lbs. (capacity is limited by suspension, tires and transmission, see owner’s manual)
  • EASY TO ADJUST — Special air fitting resists air leakage and ties into factory system (where applicable) or manually inflates with an air compressor, pair with Monroe air shock accessory and shock air hose AK kits (varies by application)
  • EXCEPTIONAL HANDLING — Full-displaced valving on compression and extension cycles for a smooth ride
  • BUILT TO LAST — Hardened and precision ground piston rod for consistent performance, sintered iron piston for enhanced durability and longer service life and lubricated air sleeve reduces friction for smooth operation
  • CONSISTENT RIDE — OE all-weather fluid contains special modifiers to handle extreme temperatures and help reduce friction and ensure smooth rod reaction
  • Sintered Iron Piston: Stronger than traditional metals, enhances durability for longer service life.
  • Special Air Fitting: Resists air leakage.
See More

Monroe – Max-Air Air Shock Absorber (Part No.MA805)

Max-Air Air Shock Absorber

from

$101.99
Ideal for hauling, Monroe® Max-Air® shock absorbers can be inflated or deflated up to 150 PSI to maintain level height with additional weight up to 1,200 lbs. (capacity is limited by vehicle suspension, tires and transmission. See vehicle owner’s manual.)

Product Features:
  • MAINTAIN RIDE HEIGHT UNDER LOAD — Air chamber can be inflated or deflated up to 150 PSI to maintain level height with additional weight up to 1,200 lbs. (capacity is limited by suspension, tires and transmission, see owner’s manual)
  • EASY TO ADJUST — Special air fitting resists air leakage and ties into factory system (where applicable) or manually inflates with an air compressor, pair with Monroe air shock accessory and shock air hose AK kits (varies by application)
  • EXCEPTIONAL HANDLING — Full-displaced valving on compression and extension cycles for a smooth ride
  • BUILT TO LAST — Hardened and precision ground piston rod for consistent performance, sintered iron piston for enhanced durability and longer service life and lubricated air sleeve reduces friction for smooth operation
  • CONSISTENT RIDE — OE all-weather fluid contains special modifiers to handle extreme temperatures and help reduce friction and ensure smooth rod reaction
  • Sintered Iron Piston: Stronger than traditional metals, enhances durability for longer service life.
  • Special Air Fitting: Resists air leakage.
See More

Monroe – Max-Air Air Shock Absorber (Part No.MA708)

Max-Air Air Shock Absorber

from

$108.99
Ideal for hauling, Monroe® Max-Air® shock absorbers can be inflated or deflated up to 150 PSI to maintain level height with additional weight up to 1,200 lbs. (capacity is limited by vehicle suspension, tires and transmission. See vehicle owner’s manual.)

Product Features:
  • MAINTAIN RIDE HEIGHT UNDER LOAD — Air chamber can be inflated or deflated up to 150 PSI to maintain level height with additional weight up to 1,200 lbs. (capacity is limited by suspension, tires and transmission, see owner’s manual)
  • EASY TO ADJUST — Special air fitting resists air leakage and ties into factory system (where applicable) or manually inflates with an air compressor, pair with Monroe air shock accessory and shock air hose AK kits (varies by application)
  • EXCEPTIONAL HANDLING — Full-displaced valving on compression and extension cycles for a smooth ride
  • BUILT TO LAST — Hardened and precision ground piston rod for consistent performance, sintered iron piston for enhanced durability and longer service life and lubricated air sleeve reduces friction for smooth operation
  • CONSISTENT RIDE — OE all-weather fluid contains special modifiers to handle extreme temperatures and help reduce friction and ensure smooth rod reaction
  • Sintered Iron Piston: Stronger than traditional metals, enhances durability for longer service life.
  • Special Air Fitting: Resists air leakage.
See More

Rare Parts – Coil Spring Insul (Part No.RP46353)

Coil Spring Insul

from

$27.99
This high quality chassis part will improve overall vehicle handling, reduce tire wear and increase the life of other steering and suspension components. These chassis parts are manufactured to meet or exceed OEM.

Product Features:
  • Reduces vibration
  • Reduces road noise
  • UV resistant
  • No Squeak
See More

Metro Mould – Coil Spring Insulator (Part No.BN 110)

Coil Spring Insulator

from

$43.49
Founded in 1918, Metro Moulded Parts, Inc. is the leading USA manufacturer of top quality molded detail rubber parts and sponge rubber weatherstripping for antique, classic, restoration cars and trucks, as well as late model vehicles. Metro’s detailed rubber parts are manufactured to meet or exceed the specifications of the original part. They are the finest reproductions available anywhere. Front Coil Spring Insulator. Each.

Product Features:
  • Jet black to match the color of the original part
  • Dense rubber to match the original
  • Exact fit
  • High quality original equipment replacement part
  • Made in the USA
See More

Firestone Ride-Rite – Controls Two Air Springs Individually, Switch Operated (Part No.2168)

Controls Two Air Springs Individually, Switch Operated

from

$1217.99
Designed to provide inflation control of your air helper springs. This kit will be an asset to your vehicle, meeting nearly all of your air supply needs.

Product Features:
  • Individual Air Accessory Components Are Also Available, Including Compressors, Air Tanks, And Mounting Solutions, Providing A Wide Variety Of Air Control Assist Solutions
  • Adjust The Ride For Various Load And Road Conditions With A Switch, Remote Or Mobile App
  • Provides An Instant Air Source For The Air Helper Springs Or Accessories
  • Dual Point Fill (Both Air Springs Fill Independently Of Each Other)
See More

Firestone Ride-Rite – Includes Heavy Duty Compressor/3 Gallon Air Tank/25 Foot Extension Hose (Part No.2239)

Includes Heavy Duty Compressor/3 Gallon Air Tank/25 Foot Extension Hose

from

$823.99
Our Air Command systems give customers the ability to conveniently adjust their air springs with the touch of a button thanks to our Air Command Air Compressor Kits. Our designs provide an instant air source to a vehicle air suspension system, giving users the freedom to adjust their air springs to accommodate different loads and road conditions from both inside and outside of the vehicle.

Product Features:
  • The Easy To Read Digital Display Is Designed So You Can See It During The Day, But It Does Not Blind You At Night
  • The Wireless Remote Utilizes A New Sleep Cycle And LED Display That Reduces Energy Use And Improves Battery Life
  • Easy Installation
See More

Firestone Ride-Rite – Controls Two Air Springs Simultaneously, With Compressor/Wiring Harness/Sensors (Part No.2543)

Controls Two Air Springs Simultaneously, With Compressor/Wiring Harness/Sensors

from

$1154.99
While your vehicle trusts Firestone Ride-Rite (TM) air helper springs to deliver on-the-road control, confidence, and comfort, you trust Firestone Air Command (TM) products to take your experience to the next level. You look to air accessories like the Xtreme Air Cmd-S Compressor System. With the Xtreme Air Cmd-S Compressor System, you can easily modify your air spring inflation by pressing a button. It equips your vehicle suspension system with an instant air source, making it easy to modify your springs to fit the road conditions and load type. You’ll find that the Firestone Xtreme Air Cmd-S Compressor System features some very user-friendly advantages. Unpackage the Xtreme Air Cmd-S Compressor System and enjoy an easy installation, so you can get it set up and be back on the move. Connect one wire to the compressor and three to the vehicle. The wiring harness and air lines can be plugged into the same side of the unit for cleaner routing of power supply and lines.

Product Features:
  • Controls Two Air Springs Simultaneously
  • Adjust The Ride For Various Load And Road Conditions With A Switch, Remote Or Mobile App
  • Provides An Instant Air Source For The Air Helper Springs Or Accessories
  • Single Point Fill (Both Air Springs Fill To The Same Pressure)
  • Extreme Duty Compressor Specs (150 Pounds Per Square Inch Max Air Pressure, 100 Percent Duty Cycle, 0.94 CFM)
See More

Monroe – Monroe Shock Absorber Air Hose Kit (Part No.AK64)

Monroe Shock Absorber Air Hose Kit

from

$25.99
Monroe® is one of the automotive industry’s best-known and most trusted original equipment and aftermarket brands, having delivered innovative undercar solutions to leading global OE manufacturers and generations of professional technicians and vehicle owners. This heritage of leading-edge products and exceptional customer support has made Monroe® shocks, struts and other ride control components a preferred choice of automotive professionals worldwide.
See More

Monroe – Monroe Shock Absorber Air Hose Kit (Part No.AK18)

Monroe Shock Absorber Air Hose Kit

from

$36.49
Monroe® is one of the automotive industry’s best-known and most trusted original equipment and aftermarket brands, having delivered innovative undercar solutions to leading global OE manufacturers and generations of professional technicians and vehicle owners. This heritage of leading-edge products and exceptional customer support has made Monroe® shocks, struts and other ride control components a preferred choice of automotive professionals worldwide.
See More

Monroe – OESpectrum Passenger Car Shock Absorber (Part No.5867)

OESpectrum Passenger Car Shock Absorber

from

$91.99
Designed to restore a vehicle’s original factory drivability and performance, Monroe® OESpectrum® passenger car shock absorbers provide an exceptional level of handling precision and control while filtering out noise, vibration and harshness.

Product Features:
  • REDUCED NOISE, VIBRATION AND HARSHNESS — Twin Technology Active Control System delivers exceptional control under most driving conditions while isolating impact-related noise, vibration and harshness
  • EXCEPTIONAL HANDLING — Full displaced valving, tuned specifically to each vehicle, adjusts to road extremes while the larger bore provides more efficient damping control to provide consistency and a smooth ride
  • CONTROL AND DURABILITY — Fluon-banded piston provides consistent sealing between piston and pressure tube for better control and increased durability
  • CONSISTENT RIDE — OE all-weather fluid contains special additives to assist with extreme temperatures and help reduce oil breakdown
  • IMPROVES PERFORMANCE — Nitrogen gas-charge maintains tire-to-road contact for improved ride and handling by reducing aeration and shock fade
  • Nitrogen Gas Charged: For improved ride and handling, helps maintain tire to road contact by reducing aeration – on most applications
  • 1/2 inch Diameter Piston Rod: Nitrocarburized rod for long service life. On non-dust shield units only.
  • Special Seal: ‘Self-lubricating’ fluid seal designed to retain gas without excessive wear or friction.
See More

Rare Parts – Shock Absorber (Part No.RP51255)

Shock Absorber

from

$365.99
This high quality chassis part will improve overall vehicle handling, reduce tire wear and increase the life of other steering and suspension components. These chassis parts are manufactured to meet or exceed OEM.

Product Features:
  • Restores vehicle control & handling Reduces tire wear Increases the Life of Other Steering and Suspension Components
See More

KYB – Damping Rate Adjustable Shock (Part No.743019)

Damping Rate Adjustable Shock

from

$128.99
KYB AGX manually-adjustable shocks and struts allow you to design your own ride control performance without special tools, quickly and as often as you want. Enthusiasts can increase individual corner damping rates up to 125% more than the vehicles OEM design. For ease of access, depending on vehicle application, the KYB AGX either has an eight position knob or a four position screwdriver slot. However, both offer the same overall capability. One simple adjustment increases both rebound and compression damping. Whether on the street or on a race track, the AGXs velocity sensitive damping valves instantly react to driving conditions to maintain tire contact and vehicle control. The AGX is a great solution for more demanding conditions that OE replacement parts just cant handle.

Product Features:
  • Adjustable Performance, Designed For Enthusiasts
  • Can Be Adjusted To Add Up To 125% More Damping Force On Your Gm F-Body
  • Externally Adjustable Without Lifting The Vehicle Or Removing The Tires
  • Features Precision Multi-Stage Hydraulic Valves For A Broad Performance Range
  • Uses A Seamless Working Cylinder Matched With A Teflon™ Coated Piston Band For A Positive Seal And Longer Life
  • Engineered To Help Vehicles With Electronic Safety Systems (Esc, Abs, Etc.)
See More

Monroe – Gas-Matic Passenger Car Shock Absorber (Part No.55831)

Gas-Matic Passenger Car Shock Absorber

from

$39.99
Monroe® Gas-Matic passenger car shock absorber are gas charged and provide improved control at an economical price.

Product Features:
  • Available for import and domestic passenger cars
  • Gas-charged unit
  • Improved handling and control
  • Economical OE replacement
  • Meets OE product specifications
See More

Monroe – Quick-Strut Complete Strut Assembly (Part No.173029L)

Quick-Strut Complete Strut Assembly

from

$233.99
Featuring a vehicle-specific design, Monroe® Quick-Strut® strut assemblies are fit checked, ride tested and engineered to restore factory ride height and ride performance. Assembled in Paragould, AR, they include all required components in a single unit.

Product Features:
  • QUICKER, SAFER, EASIER AND COMPLETE REPAIR — Includes everything you need for strut replacement in a single, fully assembled unit with no need for a spring compressor
  • RESTORES RIDE HEIGHT — Precisely calibrated to meet the OE design, each application-specific coil spring type is engineered to restore ride height and support the vehicle’s weight
  • VEHICLE-SPECIFIC DESIGN — Application-specific coil spring, mount and strut designs ensure optimized ride and handling experience unique to each vehicle profile
  • OE QUALITY — Preassembled upper strut mount, coil spring, and strut feature an OE-style design for seamless fit, form, and function
  • MADE TO LAST — Manufactured with high-quality steel, featuring a superior tube and weld design to deliver structural integrity and durability
  • MAINTAINS VEHICLE CONTROL — Reduces body sway, vibration and road harshness before it reaches the passenger cabin for improved vehicle handling
  • IMPROVES STEERING — Premium upper strut mount helps ensure smooth, “like-new” steering precision and prevents noise, vibration, harshness and memory steer
  • RUST RESISTANCE — Protective coating resists rust and corrosion while salt spray testing ensures it’s ready for the elements
  • ASSEMBLED IN THE USA — Each Quick-Strut assembly is assembled with pride in Paragould, Arkansas
See More

1986 Chevrolet Camaro Suspension Parts

You count on your 1986 Chevrolet Camaro to run right. That means taking care of it with regular maintenance, necessary repairs, and the right parts. Advance Auto Parts can help with all of that thanks to our extensive inventory of trusted Suspension Parts. With 37 Suspension Parts ranging in price from $9.49 to $1,217.99, you’re sure to find everything you need for your 1986 Chevrolet Camaro.

Brands matter. If you want to shop a specific Suspension Parts brand, we stock 11 different brands like Valvoline, Monroe, and Moog. 1986 Chevrolet Camaro Suspension Parts start as low as $9.49!

One of the best ways to find top quality OEM or aftermarket Suspension Parts is by asking professionals. Short of that, you can shop with confidence thanks to our 135 extensive product reviews on 1986 Chevrolet Camaro Suspension Parts. Some of the top-rated Suspension Parts products we carry are Coil Spring Set with 5.0 stars and Control Arm Bumper with 3.7 stars.

Did we mention you can order your Suspension Parts from our online catalog and have them shipped right to your garage? Or, if you feel like seeing the parts first-hand, search for your nearest Advance Auto Parts location above and pick up in-store when you’re ready. Browse our full Suspension Parts inventory for your 1986 Chevrolet Camaro below to get started!

Top-Rated Suspension Parts Brands For Your 1986 Chevrolet Camaro

Trusted Suspension Parts OEM and aftermarket product brands are what Advance Auto Parts specializes in. The brands we work with are sure to keep that 1986 Chevrolet Camaro running right for years to come. In our inventory you’ll find brands like Valvoline, Monroe, Moog, and even more.

Popular TRW Suspension Parts

You’ll find popular TRW brand products across Control Arms. All are waiting to get your 1986 Chevrolet Camaro back on the road. Some of the top-rated TRW products in these categories are:
Control Arm Stop
from $12.22
(1)
Control Arm Stop
Lower Control Arm Bumpers

Top-Rated Monroe Suspension Parts


If Monroe are what you’re looking for, our inventory holds plenty. We stock Monroe brand Suspension Parts for your 1986 Chevrolet Camaro, and some of our most reviewed Monroe parts include:
Monroe Shock Absorber Air Hose Kit
from $25.99
(5)
Monroe Shock Absorber Air Hose Kit
Air Shock Installation Kits
Monroe Shock Absorber Air Hose Kit
from $36.49
(3)
Monroe Shock Absorber Air Hose Kit
Air Shock Installation Kits
OESpectrum Strut
from $83.99
(3)
OESpectrum Strut
Front Shock and Struts

FAQs for 1986 Chevrolet Camaro Suspension Parts

What are the most purchased Suspension Parts for the 1986 Chevrolet Camaro?

Out of 37 Suspension Parts for the 1986 Chevrolet Camaro, the most popular in our inventory are:
DEXRON®-VI ATF Full Synthetic Automatic Transmission Fluid, 1 Quart
from $14.49
(2)
DEXRON®-VI ATF Full Synthetic Automatic Transmission Fluid, 1 Quart
Suspension Self-Leveling Unit Fluids
DEX/MERC ATF Conventional Automatic Transmission Fluid, 1 Quart
from $11.99
This product is not rated
DEX/MERC ATF Conventional Automatic Transmission Fluid, 1 Quart
Suspension Self-Leveling Unit Fluids
Gas-Matic Passenger Car Shock Absorber
from $41.99
(3)
Gas-Matic Passenger Car Shock Absorber
Rear Shock and Struts

What are the top-rated 1986 Chevrolet Camaro Suspension Parts?

Top-rated Suspension Parts for your 1986 Chevrolet Camaro based on customer reviews/ratings are:
Coil Spring Set
from $121.99
(3)
Coil Spring Set
“1999 Trans am. Great cost savings.”
Control Arm Bumper
from $16.29
(3)
Control Arm Bumper
“Makes a difference on that front suspension”
OESpectrum Passenger Car Shock Absorber
from $91.99
(3)
OESpectrum Passenger Car Shock Absorber
“Great value”