1985 Pontiac Grand Prix Tools
More 1985 Pontiac Grand Prix Tools Categories
If you’re looking for an original Tools replacement for a 1985 Pontiac Grand Prix, you can search through our selection below. You’ll also find aftermarket and OEM Tools to meet your needs.
Essential 1985 Pontiac Grand Prix Tools
Yukon Gear – Multi-Shim Driver (Part No.56077)
from
$198.99
Yukon multi-shim driver. This shim driver tool works on a variety of applications including: – GM 7.5″, 8.2″, 8.5″, 8.6″, 12P, 12T, – Ford 7.5″, 8.8″, 9.75″, 10.25″, 10.5″, – Model 35, Dana 44HD, Dana 44 JK, and more! No return.
Product Features:
See More
Product Features:
- Carrier Multi-shim driver
- Allows for easier carrier shim installation without damaging carrier shims
Hypertech – ThermoMaster Power Computer Chip (Part No.11472)
from
$168.89
Hypertech ThermoMaster Power Chips are engineered for stock 1995-1981 GM vehicles (premium octane fuel required). The Power Chip contains the Hypertech Power Tuning data that controls the engine’s air/fuel ratio and spark advance for maximum power and performance, plus potential gas mileage improvements. Power Chips can be easily installed, using only hand tools. ThermoMaster Power Chips are designed for daily street driving or competition in unmodified vehicles using a 160 Deg. or 180 Deg. thermostat. Hypertech Power Chips(TM) are emissions certified 50-state legal (application specific).
Product Features:
See More
Product Features:
- Use w/Low-Temp 160-180 Deg. PowerStat Thermostat
- Controls Engines Air/Fuel Ratio
- Controls Spark Advance For Max Power
- Potential Gas Mileage Improvements
- No Wiring Or Soldering Required
- Installs In Less Than 30 Minutes
- Product might not be available in all states due to local laws.
Hypertech – Street Runner Power Computer Chip, with Overdrive (Part No.221671)
from
$204.49
Hypertech Power Chips are engineered for stock 1981-1995 GM vehicles. The Power Chip contains the Hypertech Power Tuning data that controls the engine’s air/fuel ratio and spark advance for maximum power and performance, plus potential gas mileage improvements. Power Chips can be easily installed, using only hand tools. Street Runner Power Chips are designed for daily street driving or competition in unmodified vehicles using a stock thermostat.
Product Features:
See More
Product Features:
- Designed For Daily Street Driving
- For Unmodified Vehicles w/Stock Thermostat
- Controls Engines Air/Fuel Ratio
- Controls Spark Advance For Max Power
- Potential Gas Mileage Improvements
- No Wiring Or Soldering Required
- Installs In Less Than 30 Minutes
- Product might not be available in all states due to local laws.
Hypertech – ThermoMaster Power Chip (Part No.122492)
from
$213.99
Hypertech ThermoMaster Power Chips are engineered for stock 1995-1981 GM vehicles (premium octane fuel required). The Power Chip contains the Hypertech Power Tuning data that controls the engine’s air/fuel ratio and spark advance for maximum power and performance, plus potential gas mileage improvements. Power Chips can be easily installed, using only hand tools. ThermoMaster Power Chips are designed for daily street driving or competition in unmodified vehicles using a 160 Deg. or 180 Deg. thermostat. Hypertech Power Chips(TM) are emissions certified 50-state legal (application specific).
Product Features:
See More
Product Features:
- Use w/Low-Temp 160-180 Deg. PowerStat Thermostat
- Controls Engines Air/Fuel Ratio
- Controls Spark Advance For Max Power
- Potential Gas Mileage Improvements
- No Wiring Or Soldering Required
- Installs In Less Than 30 Minutes
- Product might not be available in all states due to local laws.
Hypertech – ThermoMaster Power Chip (Part No.154512)
from
$214.49
Hypertech ThermoMaster Power Chips are engineered for stock 1995-1981 GM vehicles (premium octane fuel required). The Power Chip contains the Hypertech Power Tuning data that controls the engine’s air/fuel ratio and spark advance for maximum power and performance, plus potential gas mileage improvements. Power Chips can be easily installed, using only hand tools. ThermoMaster Power Chips are designed for daily street driving or competition in unmodified vehicles using a 160 Deg. or 180 Deg. thermostat. Hypertech Power Chips(TM) are emissions certified 50-state legal (application specific).
Product Features:
See More
Product Features:
- Use w/Low-Temp 160-180 Deg. PowerStat Thermostat
- Controls Engines Air/Fuel Ratio
- Controls Spark Advance For Max Power
- Potential Gas Mileage Improvements
- No Wiring Or Soldering Required
- Installs In Less Than 30 Minutes
Hypertech – ThermoMaster Power Chip (Part No.12062)
from
$168.89
Hypertech ThermoMaster Power Chips are engineered for stock 1995-1981 GM vehicles (premium octane fuel required). The Power Chip contains the Hypertech Power Tuning data that controls the engine’s air/fuel ratio and spark advance for maximum power and performance, plus potential gas mileage improvements. Power Chips can be easily installed, using only hand tools. ThermoMaster Power Chips are designed for daily street driving or competition in unmodified vehicles using a 160 Deg. or 180 Deg. thermostat. Hypertech Power Chips(TM) are emissions certified 50-state legal (application specific).
Product Features:
See More
Product Features:
- Use w/Low-Temp 160-180 Deg. PowerStat Thermostat
- Controls Engines Air/Fuel Ratio
- Controls Spark Advance For Max Power
- Potential Gas Mileage Improvements
- No Wiring Or Soldering Required
- Installs In Less Than 30 Minutes
- Product might not be available in all states due to local laws.
Hypertech – ThermoMaster Power Computer Chip (Part No.11862)
from
$168.89
Hypertech ThermoMaster Power Chips are engineered for stock 1995-1981 GM vehicles (premium octane fuel required). The Power Chip contains the Hypertech Power Tuning data that controls the engine’s air/fuel ratio and spark advance for maximum power and performance, plus potential gas mileage improvements. Power Chips can be easily installed, using only hand tools. ThermoMaster Power Chips are designed for daily street driving or competition in unmodified vehicles using a 160 Deg. or 180 Deg. thermostat. Hypertech Power Chips(TM) are emissions certified 50-state legal (application specific).
Product Features:
See More
Product Features:
- Use w/Low-Temp 160-180 Deg. PowerStat Thermostat
- Controls Engines Air/Fuel Ratio
- Controls Spark Advance For Max Power
- Potential Gas Mileage Improvements
- No Wiring Or Soldering Required
- Installs In Less Than 30 Minutes
- Product might not be available in all states due to local laws.
Melling – Oil Pump Screen Installation Tool (Part No.MCAT-75)
from
$127.99
Melling suggests that a new properly installed oil pump pick-up tube or screen be a part of every oil pump installation. Melling oil pump screen installation tools provide an easy method for installing a press fit oil pump screen into the oil pump correctly without damaging the oil pump screen tube. Melling oil pump screen installation tools are precision manufactured from high quality materials for worry free performance every time. Melling offers oil pump screen installation tools for both 5/8 inch and 3/4 inch diameter tubes.
Product Features:
See More
Product Features:
- Screen installation tool allows for installing press-in type oil pump screen assembly safely
- Manufactured from high quality materials for consistent durability
- For use with 3/4 In. diameter tubes
- Precision engineered for optimum fit and function
- Designed for long-life and worry-free performance
Melling – Oil Pump Screen Installation Tool (Part No.MCAT-62)
from
$108.99
Melling suggests that a new properly installed oil pump pick-up tube or screen be a part of every oil pump installation. Melling oil pump screen installation tools provide an easy method for installing a press fit oil pump screen into the oil pump correctly without damaging the oil pump screen tube. Melling oil pump screen installation tools are precision manufactured from high quality materials for worry free performance every time. Melling offers oil pump screen installation tools for both 5/8 inch and 3/4 inch diameter tubes.
Product Features:
See More
Product Features:
- Screen installation tool allows for installing press-in type oil pump screen assembly safely
- Manufactured from high quality materials for consistent durability
- For use with 5/8 In. diameter tubes
- Precision engineered for optimum fit and function
- Designed for long-life and worry-free performance
Russell – Speed Bleeder, Thread Size – 8 mm X 1.25 (Part No.639520)
from
$18.99
Russell’s wide variety of lightweight aluminum adapter fittings allow for the connection of Russell hose ends to almost any component. Adapters are offered in standard thread, metric thread and pipe thread to fit most popular oil pumps, fuel pumps, fuel f
See More
Carquest Wearever – Bleeder Screw (sold by each) (Part No.3019407)
from
$2.49
Brakes are designed as a system and all the parts need to work together for best performance. The Bleeder Screw clears the air out of the brake line, normally placed at the highest point of the caliper or cylinder.
Product Features:
See More
Product Features:
- Manufactured with quality materials to suppress high stress levels
- Direct replacement for a proper fit
- Corrosion resistant coating for long-lasting durability against harsh roads
- Provides smoother braking
- This part matches Original Equipment (OE) quality specifications
Carquest Wearever – Bleeder Screw (sold by each) (Part No.301H9406)
from
$0.99
Brakes are designed as a system and all the parts need to work together for best performance. The Bleeder Screw clears the air out of the brake line, normally placed at the highest point of the caliper or cylinder.
Product Features:
See More
Product Features:
- Manufactured with quality materials to suppress high stress levels
- Direct replacement for a proper fit
- Corrosion resistant coating for long-lasting durability against harsh roads
- Provides smoother braking
- This part matches Original Equipment (OE) quality specifications
Earls Performance Product – Brake Bleeder Screws (Part No.280022ERL)
from
$32.59
Brake Bleeder Screws
Carquest Wearever – Bleeder Screw (sold by each) (Part No.3019402RY)
from
$0.99
Brakes are designed as a system and all the parts need to work together for best performance. The Bleeder Screw clears the air out of the brake line, normally placed at the highest point of the caliper or cylinder.
Product Features:
See More
Product Features:
- Manufactured with quality materials to suppress high stress levels
- Direct replacement for a proper fit
- Corrosion resistant coating for long-lasting durability against harsh roads
- Provides smoother braking
- This part matches Original Equipment (OE) quality specifications
Earls Performance Product – Brake Bleeder Screws (Part No.280029ERL)
from
$40.99
Brake Bleeder Screws
Carquest Wearever – Bleeder Screw (sold by each) (Part No.3019403RY)
from
$0.87
Brakes are designed as a system and all the parts need to work together for best performance. The Bleeder Screw clears the air out of the brake line, normally placed at the highest point of the caliper or cylinder.
Product Features:
See More
Product Features:
- Manufactured with quality materials to suppress high stress levels
- Direct replacement for a proper fit
- Corrosion resistant coating for long-lasting durability against harsh roads
- Provides smoother braking
- This part matches Original Equipment (OE) quality specifications
Carquest Wearever – Bleeder Screw (Part No.H9402-2)
from
$3.79
Brakes are designed as a system and all the parts need to work together for best performance. The Bleeder Screw clears the air out of the brake line, normally placed at the highest point of the caliper or cylinder.
Product Features:
See More
Product Features:
- Manufactured with quality materials to suppress high stress levels
- Direct replacement for a proper fit
- Corrosion resistant coating for long-lasting durability against harsh roads
- This part matches Original Equipment (OE) quality specifications
Carquest Wearever – Bleeder Screw (Part No.H9406-2)
from
$4.29
Brakes are designed as a system and all the parts need to work together for best performance. The Bleeder Screw clears the air out of the brake line, normally placed at the highest point of the caliper or cylinder.
Product Features:
See More
Product Features:
- Manufactured with quality materials to suppress high stress levels
- Direct replacement for a proper fit
- Corrosion resistant coating for long-lasting durability against harsh roads
- This part matches Original Equipment (OE) quality specifications
Yukon Gear – Yoke Holder Tool (Part No.56066)
from
$159.99
Yoke holder tool, fits most yokes. 1310/1330/1350/1410/7260/7290/MR3/Toyota. No return.
Product Features:
See More
Product Features:
- Yoke holder tool
- Firmly holds pinion yoke in place allowing for easier pinion preload setting
Popular 1985 Pontiac Grand Prix Tools Categories
1985 Pontiac Grand Prix Tools
You count on your 1985 Pontiac Grand Prix to run right. That means taking care of it with regular maintenance, necessary repairs, and the right parts. Advance Auto Parts can help with all of that thanks to our extensive inventory of trusted Tools. With 17 Tools ranging in price from $0.99 to $198.99, you’re sure to find everything you need for your 1985 Pontiac Grand Prix.
Brands matter. If you want to shop a specific Tools brand, we stock 7 different brands like Dorman, Carquest, and Earls Performance Product. 1985 Pontiac Grand Prix Tools start as low as $0.99!
One of the best ways to find top quality OEM or aftermarket Tools is by asking professionals. Short of that, you can shop with confidence thanks to our 363 extensive product reviews on 1985 Pontiac Grand Prix Tools. Some of the top-rated Tools products we carry are Oil Pump Screen Installation Tool with 3.0 stars.
Did we mention you can order your Tools from our online catalog and have them shipped right to your garage? Or, if you feel like seeing the parts first-hand, search for your nearest Advance Auto Parts location above and pick up in-store when you’re ready. Browse our full Tools inventory for your 1985 Pontiac Grand Prix below to get started!
Top-Rated Tools Brands For Your 1985 Pontiac Grand Prix
Trusted Tools OEM and aftermarket product brands are what Advance Auto Parts specializes in. The brands we work with are sure to keep that 1985 Pontiac Grand Prix running right for years to come. In our inventory you’ll find brands like Dorman, Carquest, Earls Performance Product, and even more.
Popular Carquest Wearever Tools
You’ll find popular Carquest Wearever brand products across Brake Tools. All are waiting to get your 1985 Pontiac Grand Prix back on the road. Some of the top-rated Carquest Wearever products in these categories are:
Top-Rated Dorman – Help Tools
If Dorman – Help are what you’re looking for, our inventory holds plenty. We stock Dorman – Help brand Tools for your 1985 Pontiac Grand Prix, and some of our most reviewed Dorman – Help parts include:
FAQs for 1985 Pontiac Grand Prix Tools
What are the most purchased Tools for the 1985 Pontiac Grand Prix?
Out of 17 Tools for the 1985 Pontiac Grand Prix, the most popular in our inventory are:
What are the top-rated 1985 Pontiac Grand Prix Tools?
Top-rated Tools for your 1985 Pontiac Grand Prix based on customer reviews/ratings are:
from
$108.99
(1)
Oil Pump Screen Installation Tool
“I purchased an MCAT-62 Oil Pump Screen installer for a 2001 Pontiace Montana 3.4 The problem is it requires an MCAT-75, I believe the product would be”
