1985 Honda Prelude Fuel and Emissions Systems
More 1985 Honda Prelude Fuel and Emissions Systems Categories
If you’re looking for an original Fuel and Emissions Systems replacement for a 1985 Honda Prelude, you can search through our selection below. You’ll also find aftermarket and OEM Fuel and Emissions Systems to meet your needs.
Essential 1985 Honda Prelude Fuel and Emissions Systems
Ishino – Throttle Body Gasket (Part No.C7001291582ISH)
from
$3.08
Throttle Body Gasket
Wells Vehicle Electronics – Fuel Injection Pressure Regulator (Part No.5G1010)
from
$111.99
WVE is a leading source of advanced vehicle electronics components for replacement applications in the automotive aftermarket and original equipment applications. WVE offers high-technology manufacturing along with innovative solutions and improvements to
See More
DENSO – Oxygen Sensor: Upstream, 4 Wire, 9.25" Long, Heated, Exact Fit (Part No.234-4095)
from
$64.99
DENSO Oxygen Sensors are manufactured and tested to the strictest OE standards for unparalleled peformance; Each component is precision built for exact replacement, and a first time fit; This innovative line features DENSO’s exclusive aluminum oxide trap layer, designed to protect the ceramic element from silicone and lead posining for improved engine performance, greater fuel efficiency, and unparalleled longevity; DENSO gives you the right part and the right fit, the first time.
Product Features:
See More
Product Features:
- Specifically designed to meet the increasing demands of today’s engines
- 100% checked for high temperature signal output, air tightness, continuity, and heat resistance for optimal efficiency and performance
- Coated with aluminum oxide to prevent silicone and lead from contacting the ceramic element and damaging the platinum electrode
- Double protection cover helps maintain proper unit temperature for quicker response times, which is critical to your vehicle’s fuel efficiency
- Manufactured with a rugged stainless steel housing and porous PTFE filter to resist corrosion and contamination
Carquest Premium – Gas Cap: Twist On, Reduces Air Pollution, 1 Pack (Part No.10817)
from
$15.79
Manufactured with OEM quality materials and safety standards by an OE Supplier. Manufactured to pass all state and federal emissions requirements. Specifically designed pressure and vacuum relief valves to prevent evaporation of fuel. A leaking fuel cap can allow up to 30 gallons of gasoline to evaporate over the period of a year.
Product Features:
See More
Product Features:
- Passes all state and federal emissions tests
- Manufactured from durable, long-life materials
- Reduces air pollution with proper sealing and venting
- Independently tested for emission control
NTK – NTK Oxygen Sensor (Part No.C501062825NTK)
from
$42.33
NTK is the world’s largest supplier and manufacturer of original equipment oxygen sensors. NTK oxygen sensors meet or exceed original equipment specifications and are equipped with waterproof factory fitted connectors to ensure a perfect fit every time. Every NTK oxygen sensor is individually tested to ensure the highest level of quality and reliability.
Product Features:
See More
Product Features:
- OE-Equivalent.
- Direct fit for easy installation.
- Extensively Tested During Manufacture to Guarantee Quality and Reliability
- Supplied With a Factory-Fitted OEM Connector for Easy Installation
DENSO – First Time Fit Oxygen Sensor (Part No.C5010112343ND)
from
$57.95
Denso First Time Fit oxygen sensors are constructed of the highest quality materials available. High-quality stainless steel, porous polytetrafluoroethylene (PTFE), fluorine rubber, aluminum oxide, high-grade platinum and ceramics are used in each DENSO sensor.
Product Features:
See More
Product Features:
- SUPERIOR DESIGN – Maximizes engine performance and fuel efficiency while reducing harmful emissions.
- DOUBLE-PROTECTION COVER – Maintains proper unit temperature for quicker response times and protects the ceramic element against silicone and lead poisoning.
- ALUMINUM-OXIDE TRAP LAYER – Keeps silicone and lead outside the ceramic element through DENSO’s exclusive design, preventing damage to the platinum electrode.
- STAINLESS STEEL HOUSING – Resists corrosion and contamination with a rugged, watertight body.
Carquest Premium – Ported Vacuum Switch (Part No.ECA1893)
from
$102.99
CARQUEST premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.
See More
Carquest – Ported Vacuum Switch (Part No.EC2983)
from
$75.05
High-quality products that meet OE appearance and performance to provide professional technicians and DIYers with a cost-effective solution.
Product Features:
See More
Product Features:
- Designed to OE standards for ease of installation
Felpro – Exhaust Gas Recirculation (EGR) Valve Gasket (Part No.70978)
from
$1.99
Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust
Product Features:
See More
Product Features:
- Meets or exceeds all original equipment specifications
- Application specific design to ensure a perfect fit
- Engineered for the sealing repair environment
- Validated for fit, form and function
- Unsurpassed quality you can trust
Ishino – Stone EGR Valve Gasket (Part No.B7100113583ISH)
from
$2.46
The Ishino Stone EGR Valve Gasket is an ideal high quality aftermarket replacement that is manufactured to meet or exceed OE specifications for fit, form, and function.
Product Features:
See More
Product Features:
- Premium aftermarket replacement
- Provides performance and dependability
- Manufactured to meet OE specifications
Carquest Premium – Engine Coolant Temperature Sensor Connector (Part No.PTA1386)
from
$16.79
CARQUEST premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.
Product Features:
See More
Product Features:
- Premium quality materials for longer service life
- Sealed connections (where applicable) to prevent environmental corrosion and performance issues
- Global coverage for import and/or domestic applications
- OE specified wire gauge to ensure a reliable electrical connection
- Designed to meet or exceed OE specifications in form, fit and function
Delphi – Electric Fuel Pump: With Hose Piece, Isolating Sleeve, Ring Terminals (Part No.FE0515)
from
$95.99
100 years of OE experience, supplier to the world’s top automakers, OE Heritage and knowledge built into every aftermarket part, comprehensive portfolio for a wide range of vehicles and model years.
Product Features:
See More
Product Features:
- Delphi is a global OE manufacturer and all fuel pumps are built to Delphi’s OE standards
- Delphi pumps are designed to operate under extreme temperatures with quick engine starts and to avoid low-fuel hesitation, including alcohol fuels and blends
- Improved pump performance as a result of Delphi’s innovative design and durability
- Restores fast pressure performance and system integrity, translating to better pumping through less energy
- Part is validated, tested and matched to the right vehicle application
- Lower amperage draws less load on vehicle’s electrical system
- Always be sure to check and clean fuel tank to avoid unnecessary returns
- Always replace the fuel strainer when doing a fuel pump repair
Delphi – Electric Fuel Pump: With Extra Fitting, Screw, Seals, Splices, Terminal Hardware, Wires (Part No.FD0030)
from
$114.99
100 years of OE experience, supplier to the world’s top automakers, OE Heritage and knowledge built into every aftermarket part, comprehensive portfolio for a wide range of vehicles and model years.
Product Features:
See More
Product Features:
- Delphi is a global OE manufacturer and all fuel pumps are built to Delphi’s OE standards
- Delphi pumps are designed to operate under extreme temperatures with quick engine starts and to avoid low-fuel hesitation, including alcohol fuels and blends
- Improved pump performance as a result of Delphi’s innovative design and durability
- Restores fast pressure performance and system integrity, translating to better pumping through less energy
- Part is validated, tested and matched to the right vehicle application
- Lower amperage draws less load on vehicle’s electrical system
- Always be sure to check and clean fuel tank to avoid unnecessary returns
- Always replace the fuel strainer when doing a fuel pump repair
Carquest Premium – Manifold Absolute Pressure Sensor (MAP) (Part No.ECE2025)
from
$159.99
CARQUEST MAP sensors are manufactured with critical OEM components to ensure that your engine runs efficiently to reach the best gas mileage on your vehicle.
Product Features:
See More
Product Features:
- CARQUEST MAP sensors connectors are exact OE fit to ensure the proper vacuum is maintained to prevent power loss and to minimize internal contamination.
- CARQUEST MAP sensors utilize high temperature resistant seals. Damaged seals can directly impact the vehicles fuel-to-air ratio, making it less fuel efficient.
- CARQUEST MAP sensors are 100% individually tested for all product functionalities including proper vacuum seal and electrical output.
Carquest – Fuel Injector (Part No.57788)
from
$68.05
High-quality products that meet OE appearance and performance to provide professional technicians and DIYers with a cost-effective solution.
Product Features:
See More
Product Features:
- Designed to OE standards for ease of installation
- Precision-wound and precision-trimmed solenoid windings allow the computer to command efficient delivery of fuel
- High-temp Viton® O-rings enable prolonged sealing of injector under extreme heat conditions
- Fiber-optic yttrium aluminum garnet “YAG” laser welding and 100 million cycle testing ensure quality in every box
Beck/Arnley – New Fuel Injector (Part No.158-0575)
from
$141.99
Beck/Arnley parts meet foreign nameplate OE specifications for form, fit and function. Our product specialists work with a network of global sourcing partners so you can install the right part with confidence.
Product Features:
See More
Product Features:
- Matches OE form, fit and function
- Premium materials and all new components
- High quality construction for durability
- Constructed to withstand an engine environment
- Application specific for this vehicle
Carquest Premium – Exhaust Gas Recirculation (EGR) Valve (Part No.EGC2072)
from
$228.99
CARQUEST premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.
See More
Carquest Premium – Exhaust Gas Recirculation (EGR) Valve (Part No.EGC1227)
from
$184.99
CARQUEST premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.
See More
Dorman – Help – Preheater Hose (Part No.96130)
from
$12.99
Available in a variety of diameters, Dorman’s HVAC Control Duct Hose is flexible, strong, and easy to install. It helps return your vehicle’s HVAC system to its original performance.
Product Features:
See More
Product Features:
- Carburetor Preheater Hose – ID: 40 mm – Length 18″ – Fiberglass – Aluminum
- Preheater Hose
- Available in a variety of diameters, Dorman’s HVAC Control Duct Hose is flexible, strong, and easy to install. It helps return your vehicle’s HVAC system to its original performance.
- High-strength fiberglass/aluminum construction helps prevent cracking
- May be cut to desired length
Carquest – Fuel Injector Seal Kit (Part No.274621)
from
$20.05
High-quality products that meet OE appearance and performance to provide professional technicians and DIYers with a cost-effective solution.
Product Features:
See More
Product Features:
- Designed to OE standards for ease of installation
- State-of-the-art designs that meet or exceed OE specifications
- Top-of-the-line quality and performance
- With industry leading expertise, when original equipment fails our products are designed to fix the inherent failure issues
- BWD is a global manufacturer of original equipment and aftermarket fuel injection products, complete quality control is maintained through the manufacturing process from componentry to finished product
Fuel Injection Corp. – Fuel Injector Seal Kit (Part No.C106055539FIC)
from
$7.66
Fuel Injection Corporation specializes in the remanufacturing of Fuel Injection components and Accessories for the automotive aftermarket. This kit contains 1 large injector seal (16472-P10-A01), 1 small injector o-ring (91301-PM7-003), and 1 flanged injector cushion ring (16473-P10-A01); enough for one fuel injector. Order additional injector seals separately as needed.
See More
OPT – Fuel Injector Seal (Part No.C1010118656OPT)
from
$2.38
Fuel Injector Seal
Delphi – Fuel Tank Cleaning Kit (Part No.FC01)
from
$12.49
To perform a complete fuel pump replacement, clean the tank every time. Order the Delphi Fuel Tank Cleaning Kit (Part FC01). Remember, the original pump went into a clean fuel tank, to ensure the same level of performance, the new pump should too. 100 ye
Product Features:
See More
Product Features:
- Helps avoid premature fuel pump failure
- Lint free towel included
- Low suds formulation
- Removes harmful contaminants from the fuel tank
Ishino – Fuel Injector O-Ring (Part No.C1012404811ISH)
from
$2.29
Fuel Injector O-Ring
Popular 1985 Honda Prelude Fuel and Emissions Systems Categories
1985 Honda Prelude Fuel and Emissions Systems
You count on your 1985 Honda Prelude to run right. That means taking care of it with regular maintenance, necessary repairs, and the right parts. Advance Auto Parts can help with all of that thanks to our extensive inventory of trusted Fuel and Emissions Systems. With 29 Fuel and Emissions Systems ranging in price from $1.99 to $228.99, you’re sure to find everything you need for your 1985 Honda Prelude.
Brands matter. If you want to shop a specific Fuel and Emissions Systems brand, we stock 10 different brands like Felpro, Delphi, and Bosch. 1985 Honda Prelude Fuel and Emissions Systems start as low as $1.99!
One of the best ways to find top quality OEM or aftermarket Fuel and Emissions Systems is by asking professionals. Short of that, you can shop with confidence thanks to our 153 extensive product reviews on 1985 Honda Prelude Fuel and Emissions Systems. Some of the top-rated Fuel and Emissions Systems products we carry are Fuel Cap: 10810, Twist-Lock, Direct Fit, Provides Tight Seal, 1 Pack with 4.7 stars and Fuel Injector Seal Kit with 5.0 stars.
Did we mention you can order your Fuel and Emissions Systems from our online catalog and have them shipped right to your garage? Or, if you feel like seeing the parts first-hand, search for your nearest Advance Auto Parts location above and pick up in-store when you’re ready. Browse our full Fuel and Emissions Systems inventory for your 1985 Honda Prelude below to get started!
Top-Rated Fuel and Emissions Systems Brands For Your 1985 Honda Prelude
Trusted Fuel and Emissions Systems OEM and aftermarket product brands are what Advance Auto Parts specializes in. The brands we work with are sure to keep that 1985 Honda Prelude running right for years to come. In our inventory you’ll find brands like Felpro, Delphi, Bosch, and even more.
Popular Carquest Fuel and Emissions Systems
You’ll find popular Carquest brand products across Fuel Injectors. All are waiting to get your 1985 Honda Prelude back on the road. Some of the top-rated Carquest products in these categories are:
Top-Rated Fuel and Emissions Systems
If are what you’re looking for, our inventory holds plenty. We stock brand Fuel and Emissions Systems for your 1985 Honda Prelude, and some of our most reviewed parts include:
FAQs for 1985 Honda Prelude Fuel and Emissions Systems
What are the most purchased Fuel and Emissions Systems for the 1985 Honda Prelude?
Out of 29 Fuel and Emissions Systems for the 1985 Honda Prelude, the most popular in our inventory are:
What are the top-rated 1985 Honda Prelude Fuel and Emissions Systems?
Top-rated Fuel and Emissions Systems for your 1985 Honda Prelude based on customer reviews/ratings are:
from
$9.49
(3)
Fuel Cap: 10810, Twist-Lock, Direct Fit, Provides Tight Seal, 1 Pack
“But it works perfect and at a ⅓ of the price. Sweet”
from
$7.66
(1)
Fuel Injector Seal Kit
“I was skeptical at first, due to the cheap price… But upon delivery I verified a perfect match and equal quality to stock honda seals (stock oem sea”
from
$19.79
(1)
Locking Fuel Cap: 10582, Push In, Direct Fit, Provides Tight Seal, 1 Pack
“I could not get this cap to go on the 1978 Ford Pickup I ordered it for! However it does work on my 1953 & 1954 Ford NAA tractors, a 1975 Ford F350 &”
