1985 GMC K1500 Cooling and Climate Controls

Essential 1985 GMC K1500 Cooling and Climate Controls

Carquest Premium – Temperature Sender With Gauge and Harness (Part No.WTC1035)

Temperature Sender With Gauge and Harness

from

$31.99
Approved materials for increased durability in even the most extreme temperatures. All MotoRad Coolant Temperature Sensors are designed to meet or exceed OEM specifications at our ISO TS16949 manufacturing facilities.

Product Features:
  • 100% factory resistance calibrated to ensure precision tolerances, resulting in extremely accurate temperature for optimal performance
  • Thread Sealant and/or O-ring pre-installed on applicable sensors to ensure leak free performance
  • Brass sensor housing precision machined to meet or exceed OE thermal conductivity
  • OE precision matched thermistor position for correct output parameters
  • Extensive product testing includes salt spray, high/low temperature impact, thermal vibration, durability, static electricity, and micro tension, among other tests, to ensure all sensors meet or exceed OEM specifications.
See More

KAI – Cooling Fan Shroud (Part No.GM3110116)

Cooling Fan Shroud

from

$39.99
New Platinum Pro Upper Fan Shroud, 5.0/5.7 Liter V8 Engine, With 28 Inch Wide Radiator

Product Features:
  • 5.0/5.7 Liter V8 Engine, With 28 Inch Wide Radiator
  • Meets All Federal Motor Safety Standards
  • No Drilling Needed For Installation
  • No Modifications Needed For Installation
  • Direct Fit Replacement For Your Vehicle
  • Same Form Fit And Function As OE
  • Check Out The Large Selection Of Parts Available For Your Vehicle
See More

Factory Air – Cap & Valve A/C System Seal Kit (Part No.26777)

Cap & Valve A/C System Seal Kit

from

$16.99
High quality OE replacement part with all components needed to complete the job

Product Features:
  • All the seals needed to complete the job
  • Compatible with both R12 and R134a refrigerants
  • SUV and rear air applications
  • Application specific
See More

ARP Auto Racing – For Use With All V8 Chevy, Hex Style Head Type, Black Oxide, Chrome Moly (Part No.130-3202)

For Use With All V8 Chevy, Hex Style Head Type, Black Oxide, Chrome Moly

from

$17.99
ARP timing cover bolts are available in both polished stainless steel or black oxide finish chrome moly. You also can choose between standard hex head bolts or compact 12 point fasteners. Also available as part of ARP complete engine and accessory kits. Studs are preferred by many pro engine builders because they eliminate the chance of pinching gaskets and contribute to easier engine assembly. You will note that ARP studs feature a special bullet nose to guide the nut accurately into place. Available in black oxide finish 8740 chrome moly or polished stainless steel with hex or 12 point nuts. Alternators that come loose are a pain, so that is why ARP came up with these super tough bolts. The stainless has the added advantage of being rust and corrosion resistant. it is the fastener of choice.

Product Features:
  • Made From Black Oxide Finished 8740 Chrome Moly Or Corrosion Resistant Stainless Steel
  • Nominally Rated At 170,000 PSI Tensile Strength
  • Made In USA
  • Sold As A Kit
See More

Dorman – Coolant Housing/Water Outlet: With Housing and Gasket, 180 Degree Neck Angle (Part No.902-2040)

Coolant Housing/Water Outlet: With Housing and Gasket, 180 Degree Neck Angle

from

$23.29
This replacement engine coolant thermostat housing is engineered to match the fit and durability of the stock thermostat housing on specified vehicles. It is designed to withstand extreme temperature changes to extend service life.

Product Features:
  • Ideal replacement – this engine coolant thermostat housing directly replaces the original housing on specified vehicle years, makes and models
  • Durable construction – this part is specifically designed to withstand extreme temperature changes and resist cracking and leaking
  • Cost-effective and reliable – offers original manufacturer quality at lower cost than getting replacement at dealer
  • Industry-leading design – professionally engineered by the aftermarket leader in replacement thermostat housings
See More

Felpro – Engine Water Pump Gasket (Part No.5152)

Engine Water Pump Gasket

from

$2.99
Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust

Product Features:
  • Meets or exceeds all original equipment specifications
  • Application specific design
  • Manufactured for the sealing repair environment
  • Validated for fit, form, and function
  • Quality that you can trust
See More

Carquest Premium – Radiator Cap: 16 PSI (Part No.10230)

Radiator Cap: 16 PSI

from

$9.79
Crafted to meet the exact specifications set by Original Equipment Manufacturers (OEM), these products are engineered for effortless installation and removal. Constructed from premium-grade components, incorporating proper relief and vacuum valves, they ensure optimal performance even in the most demanding automotive cooling systems. Rigorously quality-tested, these components provide exceptional, out-of-the-box performance and superior durability to meet or exceed the highest standards of today’s vehicles.

Product Features:
  • Maintains proper cooling system pressure
  • Easy installation and removal
  • 100% tested to ensure proper pressure and longevity
  • Meets all OEM specifications
See More

Mr. Gasket – Chrome Plated Steel Water Pump Pulley (Part No.4967)

Chrome Plated Steel Water Pump Pulley

from

$87.19
Replace your stock black water pump pulley with a chrome plated steel pulley from Mr. Gasket. The pulleys are highly polished then chrome plated for lasting beauty. Designed for big block Chevrolet engines with 5/8 inch water pump shaft.

Product Features:
  • Chrome plated steel
  • 1969-Up Big Block Chevrolet
  • For engines with 5/8¿ water pump shaft
  • For engines with 5/8┐ water pump shaft
See More

Carquest Premium – HVAC Blower Motor Resistor Connector (Part No.PTA1779)

HVAC Blower Motor Resistor Connector

from

$27.99
CARQUEST premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.

Product Features:
  • Premium quality materials for longer service life
  • Sealed connections (where applicable) to prevent environmental corrosion and performance issues
  • Global coverage for import and/or domestic applications
  • OE specified wire gauge to ensure a reliable electrical connection
  • Designed to meet or exceed OE specifications in form, fit and function
See More

Carquest Premium – Coolant Housing/Water Outlet: Gasket Included (Part No.85223)

Coolant Housing/Water Outlet: Gasket Included

from

$25.99
We are proud to offer this CARQUEST product line: CARQUEST Water Outlets. Our products are engineered and tested to provide years of trouble free operation and designed to be hassle free OE replacement part that meets and/or exceeds OE standards. Backed by over 50 years of mobile temperature control experience, fix it once and fix it right with CARQUST Water Outlets and Thermostat Housings.

Product Features:
  • Meets and/or exceeds OEM standard
  • Includes quality gasket or O-ring to ensure proper seal (where applicable)
  • Coated with corrosion and rust inhibitor
  • 100% leak tested
  • Direct-fit replacement for ease of installation
See More

Factory Air – Lip Seal Shaft Seal Kit (Part No.24013)

Lip Seal Shaft Seal Kit

from

$21.99
All hardware included; Compatible with R12 And R134A; High quality construction; Universal applications
See More

Carquest Premium – A/C Compressor and Component Kit (Part No.1183K)

A/C Compressor and Component Kit

from

$279.99
Save time on installation with everything you need in one box for an air conditioning replacement. The Carquest Premium A/C Compressor and Component Kit includes the necessary compressor, accumulator/receiver drier, and orifice tube/expansion valve, along with the necessary O-rings, gaskets, and oil. The parts are manufactured with strict quality standards from Gilmore, a climate control partner to Advance Auto Parts for over 25 years.

Product Features:
  • Each new compressor design undergoes rigorous life cycle testing at high RPMs and pressures to ensure that they can withstand years in the harshest conditions.
  • New compressors are designed with utmost precision using 3D coordinate measuring machines to ensure a perfect fit.
  • The production process contains automated controls at every stage that alerts and halts production in case of an error, assuring that the finished product will always be flawless.
  • All new compressors must pass a helium leak test and pump up function test prior to packaging.
  • Accumulators and receiver driers meet or exceed original equipment standards for moisture absorption, pressure and temperature resistance, air tightness, vibration resistance, corrosiveness, and pulse pressure.
  • Desiccant is 100% tested and assembled in a controlled environment to ensure performance meets or exceeds original equipment standards.
  • All accumulators are helium leak tested prior to packaging.
  • Each orifice tube and expansion valve is tested for function and leakage according to OEM specifications to ensure optimal performance of the air conditioning system.
  • The specific PAG oil required by your vehicle application is included.
  • O-rings and gaskets for all parts are application specific and packaged with the correct part to save time and eliminate the possibility of a leak from using the wrong O-ring or gasket.
See More

KAI – Rad Mount Bushing (Part No.GMK4012326682S)

Rad Mount Bushing

from

$22.99
New Goodmark 4 Piece Set Of Radiator Mount Cushions, For Models With 4 Row Radiators

Product Features:
  • For Models With 4 Row Radiators
  • Meets All Federal Motor Safety Standards
  • No Drilling Needed For Installation
  • No Modifications Needed For Installation
  • Direct Fit Replacement For Your Vehicle
  • Same Form Fit And Function As OE
  • Check Out The Large Selection Of Parts Available For Your Vehicle
See More

ACDelco – GM Original Equipment Heater Core (Part No.R3000425728ACD)

GM Original Equipment Heater Core

from

$188.76
ACDelco GM Original Equipment HVAC Heater Cores are small radiators, located in the plenum behind the dashboard, and are GM-recommended replacements for your vehicle’s original components. Engine coolant flows through the heater core in order to heat the air in the passenger compartment. This original equipment HVAC heater core has been manufactured to fit your specific GM vehicle, providing the same performance, durability, and service live you expect from General Motors.

Product Features:
  • Long-life alloys provide corrosion resistance
  • High-strength brazed joints ensure durability
  • GM-recommended replacement part for your GM vehicle’s original factory component
  • Offering the quality, reliability, and durability of GM OE
  • Manufactured to GM OE specification for fit, form, and function
See More

Carquest Premium – HVAC Control Switch (Part No.HKA1014)

HVAC Control Switch

from

$36.49
CARQUEST premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.
See More

Factory Air – System Mounted Cycling Pressure Switch (Part No.36664)

System Mounted Cycling Pressure Switch

from

$14.79
High quality OE replacement part with all components needed to complete the job

Product Features:
  • Contains gaskets, O-rings, or seals to properly replace the product
  • Color coded for easy identification
  • Zinc coated to resist corrosion
  • Vehicle specific applications
See More

Carquest Premium – HVAC Blower Motor Resistor (Part No.RUC1103)

HVAC Blower Motor Resistor

from

$28.49
Carquest premium direct replacement resistors are designed to match the operation and performance of the original equipment to restore the proper heating and cooling functionality.

Product Features:
  • Restores Functionality- Manufactured to original equipment specifications to restore full HVAC operation
  • Original equipment quality – Carquest blower motor resistors meet the high quality material standards and tolerances as the original equipment
  • Complete kit – Each kit includes the resistor, connector, and splice connectors to complete the job
  • Direct replacement – Carquest blower motor resistor kits are a direct replacement to the original equipment resistor
See More

Carquest Premium – HVAC Blower Switch Connector (Part No.PTA1315)

HVAC Blower Switch Connector

from

$23.99
CARQUEST premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.

Product Features:
  • Premium quality materials for longer service life
  • Sealed connections (where applicable) to prevent environmental corrosion and performance issues
  • Global coverage for import and/or domestic applications
  • OE specified wire gauge to ensure a reliable electrical connection
  • Designed to meet or exceed OE specifications in form, fit and function
See More

Carquest Premium – Standard Rotation Blower Motor Wheel (Part No.35601)

Standard Rotation Blower Motor Wheel

from

$18.29
High quality OE replacement part with all components needed to complete the job

Product Features:
  • Galvanized steel construction
  • Meets all requirements of international standard ISO 140
  • Suitable for a wide variety of applications
  • Set screw installation
See More

Santech – A/C Pressure Switch (Part No.R1054301273SII)

A/C Pressure Switch

from

$10.44
A/C Pressure Switch

Carquest Premium – Vacuum Bypass Closes Heater Valve (Part No.74781)

Vacuum Bypass Closes Heater Valve

from

$31.49
High quality OE replacement part with all components needed to complete the job

Product Features:
  • Temperature tested to 270 degrees F
  • Pressure tested to ensure leak free design
  • Vacuum controlled
  • Application specific design
See More

Factory Air – Cap & Valve A/C System Seal Kit (Part No.26775)

Cap & Valve A/C System Seal Kit

from

$14.99
High quality OE replacement part with all components needed to complete the job

Product Features:
  • All the seals needed to complete the job
  • Compatible with both R12 and R134a refrigerants
  • SUV and rear air applications
  • Application specific
See More

Flex A Lite – Belt-Driven Fan Spacer Kit (Part No.14548)

Belt-Driven Fan Spacer Kit

from

$17.99
Belt-Driven Fan Spacer Kit

Motorad – Thermostat Kit-195 Degrees w/ Gasket and Seal (Part No.4993KT)

Thermostat Kit-195 Degrees w/ Gasket and Seal

from

$20.99
Manufactured with OEM quality materials and safety standards by an OE Supplier. Stands up to even the most demanding automotive cooling systems. Manufactured with OEM specifications and processes. Copper case and wax compound assures rapid response to temperature changes in the coolant. Offset design, air relief valve, and OEM style seals included where applicable

Product Features:
  • High grade stainless steel and copper construction
  • Meets or exceeds OEM standards
  • Consistent and precise response to cooling system needs
  • Original equipment design for worry-free direct fit replacement
  • 100% tested and calibrated
See More

Felpro – Engine Water Pump Gasket (Part No.13032)

Engine Water Pump Gasket

from

$2.99
Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust

Product Features:
  • Meets or exceeds all original equipment specifications
  • Application specific design
  • Manufactured for the sealing repair environment
  • Validated for fit, form, and function
  • Quality that you can trust
See More

National – Bearings (Part No.907257)

Bearings

from

$48.99
National Oil Seals & Bearings offer a full line of premium oil seals and bearings.

Product Features:
  • Premium bearing design matches OEM specifications
  • Precision manufactured using premium-grade steel for outstanding durability and performance
  • Controlled heat treating process for lasting performance and extended bearing life
  • Industry leading coverage
  • Professional technicians know they can depend on National
See More

Carquest Standard – Reman R4 Lightweight Compressor w/ Clutch (Part No.DW57948)

Reman R4 Lightweight Compressor w/ Clutch

from

$185.99
Carquest Standard compressors offer reliable, long-lasting performance for a leak-free, dependable repair.

Product Features:
  • Built in a TS16949 certified manufacturing environment to ensure consistent quality that meets or exceeds OE specifications for fit, form, function and durability
  • All remanufactured compressors are built using the latest compressor technology available today and using strict remanufacturing processes
  • All units have new seals, O-rings, gaskets and clutch bearings
  • Tested for noise, vibration, durability, vacuum decay and pressure decay to ensure no leaks and longer life
See More

Carquest Standard – Reman GM A6 Compressor w/ Clutch (Part No.DW57096)

Reman GM A6 Compressor w/ Clutch

from

$321.99
Our products are engineered and tested to provide years of trouble free operation. Backed by over 50 years of mobile a/c experience, fix it once and fix it right with Carquest.

Product Features:
  • Built in a TS16949 certified manufacturing environment to ensure consistent quality that meets or exceeds OE specifications for fit, form, function and durability
  • All remanufactured compressors are built using the latest compressor technology available today and using strict remanufacturing processes
  • All units have new seals, O-rings, gaskets and clutch bearings
  • Tested for noise, vibration, durability, vacuum decay and pressure decay to ensure no leaks and longer life
  • Remanufactured compressors are 100 percent tested to ensure compressor function and noise level meets or exceeds OE specifications
  • Remanufactured compressors come pre-charged with 3 ounces of PAG oil for R134a or R1234yf applications
  • Remanufactured compressors are individually vacuum and pressure tested to ensure no leaks
  • Remanufactured compressors come with the R12/R134A/1234yf required O-rings /sealing washers to install the compressor
  • Remanufactured Compressors are built in a ISO9001:2015 Certified facility to ensure consistent quality standards in the Re-manufacturing process
See More

Popular 1985 GMC K1500 Cooling and Climate Controls Categories

1985 GMC K1500 Cooling and Climate Controls

You count on your 1985 GMC K1500 to run right. That means taking care of it with regular maintenance, necessary repairs, and the right parts. Advance Auto Parts can help with all of that thanks to our extensive inventory of trusted Cooling and Climate Controls. With 196 Cooling and Climate Controls ranging in price from $1.49 to $1,152.99, you’re sure to find everything you need for your 1985 GMC K1500.

Brands matter. If you want to shop a specific Cooling and Climate Controls brand, we stock 27 different brands like Carquest Premium, Permatex, and Felpro. 1985 GMC K1500 Cooling and Climate Controls start as low as $1.49!

One of the best ways to find top quality OEM or aftermarket Cooling and Climate Controls is by asking professionals. Short of that, you can shop with confidence thanks to our 9,214 extensive product reviews on 1985 GMC K1500 Cooling and Climate Controls. Some of the top-rated Cooling and Climate Controls products we carry are Engine Coolant Outlet Gasket with 4.8 stars and A/C White Orifice Tube with 4.7 stars.

Did we mention you can order your Cooling and Climate Controls from our online catalog and have them shipped right to your garage? Or, if you feel like seeing the parts first-hand, search for your nearest Advance Auto Parts location above and pick up in-store when you’re ready. Browse our full Cooling and Climate Controls inventory for your 1985 GMC K1500 below to get started!

Top-Rated Cooling and Climate Controls Brands For Your 1985 GMC K1500

Trusted Cooling and Climate Controls OEM and aftermarket product brands are what Advance Auto Parts specializes in. The brands we work with are sure to keep that 1985 GMC K1500 running right for years to come. In our inventory you’ll find brands like Carquest Premium, Permatex, Felpro, and even more.

Popular Delphi Cooling and Climate Controls

You’ll find popular Delphi brand products across Engine Cooling Parts. All are waiting to get your 1985 GMC K1500 back on the road. Some of the top-rated Delphi products in these categories are:
Engine Coolant Temperature Sensor
from $29.99
(1)
Engine Coolant Temperature Sensor
Coolant Temperature Sensors

Top-Rated Carquest Premium Cooling and Climate Controls


If Carquest Premium are what you’re looking for, our inventory holds plenty. We stock Carquest Premium brand Cooling and Climate Controls for your 1985 GMC K1500, and some of our most reviewed Carquest Premium parts include:
Radiator Cap: 16 PSI
from $9.79
(260)
Radiator Cap: 16 PSI
Radiator Caps
Blower Motor: With Wheel
from $34.99
(116)
Blower Motor: With Wheel
Blower Motors
Standard Thermostat: 195 Degrees
from $9.99
(107)
Standard Thermostat: 195 Degrees
Thermostats

FAQs for 1985 GMC K1500 Cooling and Climate Controls

What are the most purchased Cooling and Climate Controls for the 1985 GMC K1500?

Out of 196 Cooling and Climate Controls for the 1985 GMC K1500, the most popular in our inventory are:
Water Pump & Thermostat RTV Silicone Gasket Maker, 0.5 OZ
from $6.99
(288)
Water Pump & Thermostat RTV Silicone Gasket Maker, 0.5 OZ
Engine Water Pump Inlet Pipe Gaskets
Sensor-Safe, High-Torque RTV Silicone Gasket Maker
from $11.49
(95)
Sensor-Safe, High-Torque RTV Silicone Gasket Maker
Water Pump Housing Gaskets
Engine Water Pump Gasket
from $2.99
(68)
Engine Water Pump Gasket
Water Pump Gaskets

What are the top-rated 1985 GMC K1500 Cooling and Climate Controls?

Top-rated Cooling and Climate Controls for your 1985 GMC K1500 based on customer reviews/ratings are:
Engine Coolant Outlet Gasket
from $3.99
(100)
Engine Coolant Outlet Gasket
“Perfect fit”
A/C White Orifice Tube
from $2.99
(97)
A/C White Orifice Tube
“Good”
Severe Temp Automatic Adjusting Orifice Tube
from $15.99
(97)
Severe Temp Automatic Adjusting Orifice Tube
“Perfect fit in my f150. Works great.”