1985 Ford Thunderbird Drivetrains

Essential 1985 Ford Thunderbird Drivetrains

Brute Force – Universal Joint (Part No.2-4800BF)

Universal Joint

from

$5.49
Universal Joint – Brute Force
See More

Yukon Gear – Yoke For Ford 9" With 35 Spline Pinion And A 1350 U/Joint Size (Part No.41058)

Yoke For Ford 9" With 35 Spline Pinion And A 1350 U/Joint Size

from

$304.99
Yukon yoke for Ford 9″ with 35 spline pinion and a 1350 U/joint size. 3.625″ snap ring span, 1.188″ cap diameter. Outside snap ring. All Yukon yokes come with a one year warranty against manufacturing defects.

Product Features:
  • Fits Ford 9″
  • 35 spline
  • 1350 u-joint size
  • Outside snap ring design
  • 3.625″ snap ring span
  • 1.188″ cap diameter
  • U-bolt style
See More

Yukon Gear – Pinion Gear And Thrust Washer (0.875" Shaft) For 8.8" Ford (Part No.33299)

Pinion Gear And Thrust Washer (0.875" Shaft) For 8.8" Ford

from

$11.99
Pinion gear thrust washer (0.875″ shaft) for 8.8″ Ford.

Product Features:
  • Pinion gear thrust washer for Ford 8.8″
  • 0.875″ diameter cross pin shaft applications only
See More

Yukon Gear – Stub Axle Bearing For Ford 8.0" IRS (Part No.18054)

Stub Axle Bearing For Ford 8.0" IRS

from

$41.99
Product Features:
  • Stub axle bearing
  • Fits Ford 8.0″ IRS
See More

Yukon Gear – Minor Install Kit For Ford 8.8" Differential (Part No.12035)

Minor Install Kit For Ford 8.8" Differential

from

$62.99
Yukon Minimum installation kits are a low cost solution for gear changes in newer vehicles where the bearings can be reused. This kit uses all high quality components to ensure a smooth set up. kit includes a pinion seal, crush sleeve (if applicable), complete shim kit, marking compound and brush. (Includes Supershims).

Product Features:
  • Fits Ford 8.8″
  • Included are a pinion seal, crush sleeve , complete shim kit, marking compound and brush.
See More

Yukon Gear – Bearing Race Driver (Part No.56023)

Bearing Race Driver

from

$219.99
Bearing race driver. No return.

Product Features:
  • Bearing race driver
  • Fits M88010 race
  • All steel construction
See More

Pro-King – Differential Cover Gasket (Part No.762B303)

Differential Cover Gasket

from

$3.99
Pro-King is the leading supplier of transmission and driveline products in the aftermarket.

Product Features:
  • All products are designed to meet or exceed OE quality, form, fit and funtion.
See More

KYB – High Pressure Monotube Gas Shock for Cars and Trucks (Part No.KG4521)

High Pressure Monotube Gas Shock for Cars and Trucks

from

$80.99
Product Features:
  • Adds up to 25% more damping performance over original equipment shocks
  • Vehicle specific components and valving
  • High gas pressure design provides instant, extra control
  • Monotube design outperforms all other standard shock absorbers
  • Unique, air-free, hydraulic unit eliminates performance fade
See More

Pro-King – Differential Internal Nest Kit (Part No.761A717)

Differential Internal Nest Kit

from

$309.99
Pro-King is the leading supplier of transmission and driveline products in the aftermarket.

Product Features:
  • All products are designed to meet or exceed OE quality, form, fit and funtion.
See More

Dorman – Spindle Nut 3/4 In.-16 and M20 In.-1.0 Hex Size 1-1/16 In. and 27mm (Part No.615-073.1)

Spindle Nut 3/4 In.-16 and M20 In.-1.0 Hex Size 1-1/16 In. and 27mm

from

$4.99
This spindle nut retainer is designed to match the fit and function of the original part on specified vehicles. Made of quality materials, it is engineered for reliable performance.

Product Features:
  • Direct replacement – this spindle nut retainer matches the fit and function of the factory part on specified years, makes and models
  • Ideal solution – this retainer is a reliable replacement for an original part that is missing or has failed due to fatigue
  • Durable construction – this part is made from quality materials to ensure reliable performance and long service life
  • Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience
See More

National – Bearings (Part No.M802011)

Bearings

from

$14.79
National Oil Seals & Bearings offer a full line of premium oil seals and bearings.

Product Features:
  • Premium bearing design matches OEM specifications
  • Precision manufactured using premium-grade steel for outstanding durability and performance
  • Crowned raceways and rollers to ensure even load distribution for maximum life
  • Industry leading coverage
  • Professional technicians know they can depend on National
See More

Spicer – SPICER U-JOINT (Part No.5-1310-1X)

SPICER U-JOINT

from

$44.99
SPICER U-JOINT

Yukon Gear – Redline Synthetic "Shock Proof" Oil With Positraction Additive – 4 Quarts (Part No.15005)

Redline Synthetic "Shock Proof" Oil With Positraction Additive - 4 Quarts

from

$148.99
Redline Synthetic “Shock Proof” Oil with positraction Additive. 4 Quarts.

Product Features:
  • Includes four quarts of Redline Shockproof oil and one 4oz bottle of Yukon positraction additive
See More

Yukon Gear – Ford 7.5" C/Clip, Tracloc & Standard Open (Part No.33080)

Ford 7.5" C/Clip, Tracloc & Standard Open

from

$8.99
Ford 7.5″ C/clip, TracLoc & standard Open.

Product Features:
  • c-clip for Ford 7.5″
  • Fits standard open and Trac Loc applications
  • Not compatible with Auburn Gear positraction
See More

Yukon Gear – Positraction Shim Kit (18 Shims) For GM 8.2", GM 8.5", 12T, 12P, Ford 8.8" & Cast Iron ‘Vette (Part No.16042)

Positraction Shim Kit (18 Shims) For GM 8.2", GM 8.5", 12T, 12P, Ford 8.8" & Cast Iron 'Vette

from

$41.99
Product Features:
  • Shim kit
  • Fits Ford 8.8″, 1963-1979 Corvette, GM 12 bolt passenger car and truck, 8.2″, 8.5″ and 8.6″ Dura Grip positraction
See More

Yukon Gear – Trac Loc Spring Plate For Ford 9" & 8" (Part No.33517)

Trac Loc Spring Plate For Ford 9" & 8"

from

$10.99
Product Features:
  • Trac Loc spring plate for Ford 8″ and 9″
See More

Yukon Gear – The Carrier Bearing Puller (Part No.56072)

The Carrier Bearing Puller

from

$883.99
The Yukon carrier bearing Puller works with an impact gun to quickly and safely remove carrier bearings without damaging them. This unit comes with a handy bench top stand and works with up to one ton applications including Dana 70HD, Dana 80, 10.25″ & 10.5″ Ford, or GM & Chrysler 11.5″ differentials.

Product Features:
  • Carrier bearing puller
  • Works with an impact gun to safely and easliy remove carrrier bearings
See More

Yukon Gear – Outer Oil Slinger For Ford 7.5", 8.8", 9", 10.25" (Part No.33022)

Outer Oil Slinger For Ford 7.5", 8.8", 9", 10.25"

from

$8.99
Replacement outer oil slinger for Ford 7.5″, 8.8″, 9″, 10.25″, Nissan Titan rear, Dana 44 Rubicon & 44 JK non-Rubicon.

Product Features:
  • Outer oil slinger for Ford 10.25″, 7.5″, 8.8″ and 9″ also Jeep JK and Nissan Titan rear
See More

Yukon Gear – Ford 8" & 9" Standard Open, Ag, & Detroit Locker Ring Gear Bolt (Part No.33058)

Ford 8" & 9" Standard Open, Ag, & Detroit Locker Ring Gear Bolt

from

$5.99
Ford 8″ & 9″ standard Open, AG, & Detroit locker ring gear bolt. 7/16″ head, .925″ long.

Product Features:
  • Ring gear bolt for Ford 8″ and 9″
  • For use with standard open carrier, Auburn Gear limited slip and Detroit Locker
  • 7/16″ head
  • .925″ long
See More

Dorman – Help – Differential Shaft Lock Bolt (Part No.81048)

Differential Shaft Lock Bolt

from

$5.99
This differential pinion shaft lock bolt is designed to match the fit and function of the original part on specified vehicles. Made of quality materials, it is engineered for reliable performance.

Product Features:
  • Direct replacement – this differential pinion shaft lock bolt matches the fit and function of the factory part on specified years, makes and models
  • Ideal solution – this bolt is a reliable replacement for an original part that is missing or has failed due to fatigue
  • Durable construction – this part is made from quality materials to ensure reliable performance and long service life
  • Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience
See More

Yukon Gear – Pinion Install Kit For Ford 7.5" Differential (Part No.13039)

Pinion Install Kit For Ford 7.5" Differential

from

$184.99
Yukon Pinion installation kits are a terrific solution for gear installation on lower mileage vehicles where the carrier bearings & races can be reused. This kit uses Timken bearings and races along with a high quality pinion seal and small parts. Included in this kit are the pinion bearings and races, pilot bearing (if applicable), crush sleeve (if applicable), complete pinion shim kit, thread locker, and marking compound with brush. Yukon does extensive research for each application to make sure your kit will arrive with all the correct parts you need to install your pinion gear.

Product Features:
  • Fits Ford 7.5″
  • Included are pinion bearings and races, pinion seal, pinion nut, crush sleeve, complete pinion shim kit, and marking compound with brush.
See More

Yukon Gear – Conversion Bearing For Small Bearing Ford 9" Axle In Large Bearing Housing (Part No.18046)

Conversion Bearing For Small Bearing Ford 9" Axle In Large Bearing Housing

from

$92.99
Conversion bearing for small bearing Ford 9″ axle in large bearing housing.

Product Features:
  • Axle bearing
  • Fits Ford 9″
  • Conversion bearing to install small bearing axle into large bearing housing
  • 3.150″ O.D.
  • 1.377″ I.D.
See More

Pro-King – Differential Axle Seal (Part No.742G074)

Differential Axle Seal

from

$4.49
Pro-King High Quality Differential Products are designed for trouble free installation and setup.
See More

Yukon Gear – Carrier Installation Kit For Ford 8.8" Differential (Part No.57007)

Carrier Installation Kit For Ford 8.8" Differential

from

$134.99
Yukon Carrier installation kits are great, low cost kit for carrier changes such as Positraction or locker upgrades. Carrier installation kit for Ford 8.8″ differential. This kit contains carrier bearings, races and shims.

Product Features:
  • Fits Ford 8.8″
  • Includes carrier bearings and races and “super” carrier shim kit
See More

Powertrax – Lock Right Locker (Part No.1822-LR)

Lock Right Locker

from

$371.99
The Powertrax Lock-Right ultra-strength alloy locker’s straight-line performance is equal to a solid spool, but automatically unlocks in turns. Best suited for extreme off-road to severe on-road use, Powertrax Lock Right lockers replace the spider gears in your open differential carrier using basic tools and without affecting your ring and pinion settings. The whole job can be done in your driveway in a couple of hours, pin included! Powertrax Grip-Lok, Lock-Right Lockers and No-Slip Traction Systems automatically provide 100% traction on-demand, under the toughest circumstances. The Powertrax Grip-Pro and Grip-LS performance limited slips offer smooth dependable torque transfer and traction for the best of both worlds!The Powertrax® Lock-Right Locker provides outstanding traction for off-road machines and race vehicles. Powertrax No-Slip Traction Systems deliver excellent performance to street-driven cars and trucks.
  • Powertrax® lockers range from the original, Lock-Right for serious straight-line performance, to the No-Slip traction system for street-able vehicles.
  • Powertrax® offers three levels of GRIP locking differentials, ranging from the clutch-type GRIP LS with a forged steel case, the gear-driven GRIP PRO and finally the GRIP LOK for extreme traction.
  • Powertrax® = Extreme Traction Systems!
  • See More

    Yukon Gear – Pinion Nut (Part No.33154)

    Pinion Nut

    from

    $7.99
    Pinion nut for Ford 7.5″, 8″, 8.8″, 9 3/8″ & 9″. 1 1/6″ socket, 3/4″ x 20 thread.

    Product Features:
    • Pinion nut for Ford 7.5″, 8″ and 9″
    • 3/4″ x 20 thread
    • 1 1/6″ socket
    See More

    USA Standard Gear – 9" Ford Spartan Locker Cross Pin, Extra Short (Part No.17044)

    9" Ford Spartan Locker Cross Pin, Extra Short

    from

    $22.99
    9″ FORD SPARTAN LOCKER EXTRA SHORT Cross Pin SHAFT .

    Product Features:
    • USA Standard Gear heavy-duty cross pin shaft
    • Fits Ford 9″
    See More

    Yukon Gear – 8.8" Ford 3/4" Notched Cross Pin Shaft (0.750", ’85 And Older) (Part No.33432)

    8.8" Ford 3/4" Notched Cross Pin Shaft (0.750", '85 And Older)

    from

    $78.99
    8.8″ Ford 3/4″ Notched cross pin shaft (0.750″, ’85 and older). This cross pin shaft is not compatible with Powertrax Lock Rights or Spartan Lockers.

    Product Features:
    • Cross pin shaft
    • Fits Ford 8.8″
    • 0.750″ diameter
    • Notched
    • Not compatible with Spartan Lockers or Lock Rights
    See More

    Popular 1985 Ford Thunderbird Drivetrains Categories

    1985 Ford Thunderbird Drivetrains

    You count on your 1985 Ford Thunderbird to run right. That means taking care of it with regular maintenance, necessary repairs, and the right parts. Advance Auto Parts can help with all of that thanks to our extensive inventory of trusted Drivetrains. With 133 Drivetrains ranging in price from $0.99 to $883.99, you’re sure to find everything you need for your 1985 Ford Thunderbird.

    Brands matter. If you want to shop a specific Drivetrains brand, we stock 18 different brands like Valvoline, Moog, and National. 1985 Ford Thunderbird Drivetrains start as low as $0.99!

    One of the best ways to find top quality OEM or aftermarket Drivetrains is by asking professionals. Short of that, you can shop with confidence thanks to our 2,426 extensive product reviews on 1985 Ford Thunderbird Drivetrains. Some of the top-rated Drivetrains products we carry are Oil Seal with 4.8 stars and Greaseable Super Strength Universal Joint with 4.6 stars.

    Did we mention you can order your Drivetrains from our online catalog and have them shipped right to your garage? Or, if you feel like seeing the parts first-hand, search for your nearest Advance Auto Parts location above and pick up in-store when you’re ready. Browse our full Drivetrains inventory for your 1985 Ford Thunderbird below to get started!

    Top-Rated Drivetrains Brands For Your 1985 Ford Thunderbird

    Trusted Drivetrains OEM and aftermarket product brands are what Advance Auto Parts specializes in. The brands we work with are sure to keep that 1985 Ford Thunderbird running right for years to come. In our inventory you’ll find brands like Valvoline, Moog, National, and even more.

    Popular Felpro Drivetrains

    You’ll find popular Felpro brand products across Differentials. All are waiting to get your 1985 Ford Thunderbird back on the road. Some of the top-rated Felpro products in these categories are:
    Differential Cover Gasket
    from $14.99
    (3)
    Differential Cover Gasket
    Rear Housing Cover Gaskets

    FAQs for 1985 Ford Thunderbird Drivetrains

    What are the most purchased Drivetrains for the 1985 Ford Thunderbird?

    Out of 133 Drivetrains for the 1985 Ford Thunderbird, the most popular in our inventory are:
    Greaseable Premium Universal Joint
    from $19.99
    (82)
    Greaseable Premium Universal Joint
    U-Joints
    Universal Joint
    from $15.99
    (33)
    Universal Joint
    U-Joints
    Bearings
    from $16.99
    (39)
    Bearings
    Axle Shaft Bearings

    What are the top-rated 1985 Ford Thunderbird Drivetrains?

    Top-rated Drivetrains for your 1985 Ford Thunderbird based on customer reviews/ratings are:
    Oil Seal
    from $5.49
    (38)
    Oil Seal
    “Exact fit , price was good”
    Greaseable Super Strength Universal Joint
    from $32.99
    (37)
    Greaseable Super Strength Universal Joint
    “grease fitting I like location dont like needle design to grease should be regular design fitting”
    Non-Greaseable Super Strength Universal Joint
    from $32.99
    (28)
    Non-Greaseable Super Strength Universal Joint
    “installed as needed”