1985 Ford Ranger Performance and Racing Products

Essential Performance and Racing Products for 1985 Ford Rangers

Powertrax – Lock Right Locker (Part No.1822-LR)

Lock Right Locker

from

$371.99
The Powertrax Lock-Right ultra-strength alloy locker’s straight-line performance is equal to a solid spool, but automatically unlocks in turns. Best suited for extreme off-road to severe on-road use, Powertrax Lock Right lockers replace the spider gears in your open differential carrier using basic tools and without affecting your ring and pinion settings. The whole job can be done in your driveway in a couple of hours, pin included! Powertrax Grip-Lok, Lock-Right Lockers and No-Slip Traction Systems automatically provide 100% traction on-demand, under the toughest circumstances. The Powertrax Grip-Pro and Grip-LS performance limited slips offer smooth dependable torque transfer and traction for the best of both worlds!The Powertrax® Lock-Right Locker provides outstanding traction for off-road machines and race vehicles. Powertrax No-Slip Traction Systems deliver excellent performance to street-driven cars and trucks.
  • Powertrax® lockers range from the original, Lock-Right for serious straight-line performance, to the No-Slip traction system for street-able vehicles.
  • Powertrax® offers three levels of GRIP locking differentials, ranging from the clutch-type GRIP LS with a forged steel case, the gear-driven GRIP PRO and finally the GRIP LOK for extreme traction.
  • Powertrax® = Extreme Traction Systems!
  • See More

    Mr. Gasket – Thermocap Radiator Cap (Part No.2476BK)

    Thermocap Radiator Cap

    from

    $48.09
    The fastest, easiest way to know exactly when it’s safe to open your radiator cap. ThermoCap, with its built-in calibrated thermometer, indicates the coolant temperature.

    Product Features:
    • Indicates coolant temperature
    • Helps prevent coolant injuries
    • Fahrenheit and centigrade readings
    • Color-coded temperature ranges
    • Integrated coolant reclamation valve
    • Improves under-hood appearance
    • Chromed crown with a colored trim ring
    See More

    Hurst – B-1 Shifter Boot and Plate (Part No.1147336)

    B-1 Shifter Boot and Plate

    from

    $42.49
    Designed for use with round stick shifters. Complete with chrome ID plate and mounting hardware. Measures: 4-3/8 in. x 5-3/8 in. with 3 pleats.

    Product Features:
    • Complete with Mounting Hardware
    • Adapt To Most Shifter Install
    • Hurst Quality
    • Works Well with Round Shift Levers
    • Chrome ID Plate
    See More

    Energy Suspension – Body Cab Mount Set (Part No.4.4103G)

    Body Cab Mount Set

    from

    $103.99
    Will replace distorted and worn-out original rubber mounts to maintain car body and truck cab to bed alignment. Original rubber mounts are so soft they often crack, distort, and crush so badly they often fall off and aluminum body mounts are too harsh for street use that they tend to break and cause other components to break. Energy’s specially formulated Hyper-Flex polyurethane cab and body mounts combine the best qualities of both: they’re soft enough for a smooth ride, yet rugged enough for the most demanding road or track. Most sets have a strong zinc plated steel ring molded into them – for added durability and when the application requires it.

    Product Features:
    • Assures Longer Lasting Cab to Bed Alignment
    • Replace to Restore Ride Height
    • Gain Durability
    • Stronger Than Original Rubber Mounts
    See More

    Energy Suspension – TransMt (Part No.4.1148G)

    TransMt

    from

    $80.99
    TransMt

    Richmond Gear – RngPnn (Part No.69-0382-1)

    RngPnn

    from

    $369.99
    RngPnn

    Energy Suspension – Leaf Spring Bushing Set (Part No.4.2134G)

    Leaf Spring Bushing Set

    from

    $70.99
    Adds a dramatic amount of performance and durability to any vehicle, cars, trucks and SUVs. Helps the vehicle be in control – when maneuvering through turns, during standing start accelerations, braking, even over bumps and berms. Made of Energy’s Hyper-Flex performance polyurethane which lasts 5 -10 times longer than conventional rubber components.

    Product Features:
    • Made of Superior Hyper-Flex+ Material
    • Adds Dramatic Amount of Performance/Durability
    • Helps Vehicle Be in Control
    • Allows the Suspension to Function Properly
    See More

    Accel – Ford Tfi Mdltr 84-93 W/Grease (Part No.35369)

    Ford Tfi Mdltr 84-93 W/Grease

    from

    $103.99
    This high performance ignition module provides your plugs with more spark over the stock module. The solid state electronics provide high coil out put and superior reliability. The Dwell control circuit ensures, long consistent coil charging. The current control circuit protects against coil over heating. This module fits most Ford Thick Film Ignition systems. 1984 thru 1993.

    Product Features:
    • Fits Most Stock And Modified Distributors
    • Dwell Control Circuit
    • Resists False Triggering
    See More

    Energy Suspension – Axle Pivot Bushing Set (Part No.4.3121G)

    Axle Pivot Bushing Set

    from

    $29.99
    Product Features:
    • Firm in the Center Yet Soft on the Outside
    • Allows Flex and Pivot When Needed
    See More

    Energy Suspension – Axle Pivot Bushing Set (Part No.4.3121R)

    Axle Pivot Bushing Set

    from

    $27.99
    Product Features:
    • Firm in the Center Yet Soft on the Outside
    • Allows Flex and Pivot When Needed
    See More

    Flowmaster Inc. – 50 Series Muffler, 2in Offset Inlet 2in Center Outlet, Non-Reversible, Moderate Sound (Part No.942051)

    50 Series Muffler, 2in Offset Inlet 2in Center Outlet, Non-Reversible, Moderate Sound

    from

    $154.99
    The three chamber design utilizes Flowmaster’s patented Delta Flow technology along with an internal tuning chamber to reduce sound inside the vehicle. Provides the same performance and exterior tone characteristics as the two chamber, but with less interior resonance. Constructed of 16 gauge aluminized steel and fully MIG welded for maximum durability.
    See More

    Dynomax – Ultra Flo Muffler: Universal Fit Stainless Steel, 20" L, 2.5" In, 2.5" Out, Oval (Part No.17289)

    Ultra Flo Muffler: Universal Fit Stainless Steel, 20" L, 2.5" In, 2.5" Out, Oval

    from

    $204.99
    DynoMax Ultra Flo¿ Welded performance stainless steel mufflers feature 100-percent welded construction for lifelong durability. The unrestricted, straight-through design dyno proven to flow up to 2,000 SCFM and support up to 2,000 horsepower. Each muffler uses our exclusive Continuous Roving Fiberglass (CRF) Technology to absorb unwanted interior resonance while maintaining a deep performance tone.

    Product Features:
    • Stainless steel construction for lifelong protection
    • Polished finish for a show quality shine
    • Dyno proven to flow up to 2,000 SCFM and support up to 1,900 horsepower
    • Straight through design ensures unrestricted exhaust flow and reduces back pressure
    • CRF Technology absorbs unwanted interior resonance while maintaining a deep performance tone
    See More

    Accel – Ford 1984-98 Eec-Iv Supercoil (Part No.140012)

    Ford 1984-98 Eec-Iv Supercoil

    from

    $77.99
    Engineered with optimized low resistance, high turns ratio windings around an M36 high silicone magnetic steel E-core for higher energy and voltage outputs. Results in quicker starts, improved idle quality, and crisper throttle response. Compatible with late model Ford EEC-IV computer controlled ignition system equipped with a TFI distributor. Direct OEM replacement. Can also be used with an ACCEL, Mallory, Crane, Holley or MSD capacitive discharge ignition system. Special high temperature epoxy resists shock and vibration, while increasing thermal conductivity. Brass coil wire contact increases energy efficiency and resists corrosion better than aluminum. High dielectric strength ACCEL Yellow over-molded housing.

    Product Features:
    • Direct Plug In Replacement Direct OE Fit
    • Advanced Bobbin Technology
    • Standard Motor Products SMP Fd-478
    • MSD 5527
    • Standard Motor Products SMP Fd-478
    • MSD 5527
    • Resists Shock And Vibration
    • Resists Corrosion
    See More

    Mallory – Promaster Classic Series; Ignition Coil (Part No.29440)

    Promaster Classic Series; Ignition Coil

    from

    $186.99
    Universal street and strip. For street-driven vehicles with breaker point ignition or OE electronic ignition. Delivers optimum performance when used with these Mallory ignition products: UNILITE (R) distributor with a HYFIRE (R) capacitive discharge ignition, magnetic breaker less distributor with a HYFIRE (R) capacitive discharge ignition, or dual point distributor. Effective to approximately 6500 RPM when used with a point type distributor (depending on engine combination). Effective to approximately 8000 RPM when used with a Mallory HYFIRE electronic ignition control (depending on engine combination).

    Product Features:
    • Glass Filled Polyester Case
    • Longer Spark Duration
    • Increased Performance
    • No Energy Loss Due To Arcing
    • Includes Brass Contact Terminal
    See More

    FEL-PRO Performance – Cylinder Head Gasket: Steel Core Composite, Without Head Bolts (Part No.1035)

    Cylinder Head Gasket: Steel Core Composite, Without Head Bolts

    from

    $82.99
    Fel-Pro Performance Gaskets deliver reliable sealing under grueling racing conditions

    Product Features:
    • Fel-Pro Performance head gaskets accommodate the high cylinder pressures and cylinder head movement associated with performance engines.
    • Inserted within a stainless steel armor surrounding each cylinder, wire ring design provides highly concentrated sealing around the combustion chamber.
    • Raises combustion sealing force to roughly three times that of standard head gaskets.
    • Steel wire rings for the greatest combustion seal strength.
    • Not intended for use in emission controlled vehicles.
    See More

    Dynomax – Exhaust Tail Pipe (Part No.45173)

    Exhaust Tail Pipe

    from

    $75.99
    Made from quality materials for durability, DynoMax pipe is manufactured with precision benders and fixture checked to ensure a precise fit for quick and easy installation.

    Product Features:
    • IMPROVED FLOW CAPACITY — Mandrel bends (where applicable) improve flow capacity over traditional bends while increased pipe diameter from OE sizes increases flow and power
    • DESIGNED TO PERFORM — Fixture checked to ensure a precise fit for quick and easy installation
    • AVAILABLE IN DIFFERENT SIZES — Offered in a variety of styles and sizes for a quality vehicle repair
    • PREMIUM MATERIALS?–?Made from aluminized steel for durability and long life
    • BETTER TOGETHER — Use premium DynoMax accessories when installing DynoMax mufflers and exhaust systems for a complete performance exhaust system upgrade
    See More

    Earls Performance Product – Brake Bleeder Screws (Part No.280022ERL)

    Brake Bleeder Screws

    from

    $32.59
    Brake Bleeder Screws

    Rancho – Single Steering Damper Kit (Part No.RS97481)

    Single Steering Damper Kit

    from

    $117.99
    Designed to reduce wheel shimmy and end vibration caused by larger tires, the Rancho® steering stabilizer kit cuts down on steering arm fatigue to improve handling. The kit includes one Rancho RS5000® steering stabilizer and installation brackets.

    Product Features:
    • COMPATIBILITY — Designed for a variety of Ford trucks and SUVs
    • IMPROVED HANDLING AND PERFORMANCE — Reduces wheel shimmy, bump steer and vibration which helps minimize on- or off-road driver fatigue
    • ACCOMMODATES LARGER TIRES — Engineered for vehicles with oversized wheels and tires.
    • ENGINEERED TO LAST — Features protective boot to shield shock rod and oil seal and 0.25-in. high-strength, low-alloy steel bracket construction for long life
    • EASY TO INSTALL — Includes one Rancho RS5000® steering stabilizer and brackets that bolt directly to factory steering linkage with included mounting hardware, no modifications needed
    • RESISTS CORROSION — Durable black powder-coated and/or zinc-plated brackets resist rust and corrosion
    • PRECISION DESIGN — Brackets are CNC cut and bent to exact specifications for a perfect fit
    See More

    Mr. Gasket – Remote Oil Filter Kit (Part No.7682)

    Remote Oil Filter Kit

    from

    $97.99
    This kit relocates the oil filter for quick, clean and easy access and increased filtering. It is complete with precision die cast aluminum by-pass, filter brackets and all high pressure connectors.

    Product Features:
    • Relocate oil filter to an easy access location
    See More

    Mallory – Unilite Ignition Module (Part No.605)

    Unilite Ignition Module

    from

    $85.29
    Mallory’s UNILITE (R), and magnetic breaker less ignition modules are self contained module assemblies which have no moving parts to wear out. Using Mallory’s time tested breaker less ignition circuit, combined with modern surface mount thermal-clad construction, these ignition modules can drive both OEM and high performance ignition coils. For best results always use a Mallory PROMASTER coil or a Mallory chrome electronic ignition coil. These are also an excellent choice for triggering one of the Mallory HyFire series of electronic ignition controls. Hookup is as easy as a three wire connection.

    Product Features:
    • Service Part
    • No Moving Parts To Wear Out
    • Self Contained Unit
    • Can Drive OEM
    • Can Drive High Performance Ignition Coils
    See More

    Energy Suspension – Tie Rod Dust Boot (Part No.9.13101R)

    Tie Rod Dust Boot

    from

    $9.99
    Repair torn and worn-out boots of suspension tie rod ends – without having to buy the entire and expensive tie rod. Adds durability surpassing most OEM rubber boots. Exclusive 5 point sealing action. Choose from four sizes and round or octagon styles. Made of Energy’s Hyper-Flex performance polyurethane for added performance and durability.

    Product Features:
    • Easy to Install
    • Superior Material
    • Saves Your Tie Rods
    • Lasts Longer
    • Looks Great
    See More

    Upgrade your 1985 Ford Ranger with Top-Quality Performance and Racing Products

    When it comes to maintaining or upgrading your 1985 Ford Ranger, nothing is more important than using high-quality OEM or aftermarket parts that you can trust. Whether you’re repairing damage to your Ford or enhancing its overall performance, Performance and Racing Products are key to keeping your Ranger functioning at its best. At Advance Auto Parts, we offer a wide selection of 28 Performance and Racing Products for the 1985 Ford Ranger, designed to meet your needs without breaking the bank. From Performance Exhaust Product replacements to Performance Oil Filters upgrades, we’ve got you covered with parts that fit your vehicle perfectly and ensure long-lasting performance.

    Affordable Prices and Wide Selection

    Shopping for Performance and Racing Products for any vehicle can be a hassle, especially if you’re on a budget. But with Advance Auto Parts, you can find high-quality Performance and Racing Products for your 1985 Ford Ranger at great prices. Our Performance and Racing Products inventory for this model ranges from just $9.99 to $441.99, with an average price of $98.75. Our 28 Performance and Racing Products in stock come from 13 trusted brands, so you’re sure to find the right part for your 1985 Ford Ranger without overspending.

    Top Brands and High Customer Satisfaction

    Advance Auto Parts takes pride in offering only the best brands in the automotive industry. For your 1985 Ford Ranger, we stock popular OEM and aftermarket Performance and Racing Products from top names like Accel Energy Suspension, and more. Accel Performance and Racing Products start at just $77.99 and boast an impressive 4 stars average rating from customers. With 174 customer reviews and counting, our 1985 Ford Ranger Performance and Racing Products have a strong track record of reliability, ensuring you can trust your purchase.

    Explore Related Parts and More

    While you’re here, don’t forget to check out other essential categories that go hand in hand with Performance and Racing Product upgrades. Explore related part types like Batteries and Chargers, Oil and Lubricants and more to make sure your 1985 Ford Ranger is always ready to roll. We’re committed to providing you with everything you need to keep your Ranger in top shape, all in one place. Start shopping confidently below for your 1985 Ford Ranger!

    Best-Selling Performance Exhaust Products for 1985 Ford Rangers

    Enhance the driving experience in your Ford with 4 quality Performance Exhaust Product components, starting at $60.99.

    Flowmaster Inc. – 50 Series Muffler, 2in Offset Inlet 2in Center Outlet, Non-Reversible, Moderate Sound (Part No.942051)

    50 Series Muffler, 2in Offset Inlet 2in Center Outlet, Non-Reversible, Moderate Sound

    from

    $154.99
    The three chamber design utilizes Flowmaster’s patented Delta Flow technology along with an internal tuning chamber to reduce sound inside the vehicle. Provides the same performance and exterior tone characteristics as the two chamber, but with less interior resonance. Constructed of 16 gauge aluminized steel and fully MIG welded for maximum durability.
    See More

    Dynomax – Super Turbo Muffler: Universal Fit Aluminized Steel, 14" L, 2" In, 2" Out, Oval (Part No.17730)

    Super Turbo Muffler: Universal Fit Aluminized Steel, 14" L, 2" In, 2" Out, Oval

    from

    $60.99
    DynoMax Super Turbo performance mufflers exclusive patented flow director design channels exhaust flow and eliminates turbulence on most applications. The large internal flow tubes improve exhaust flow and reduce backpressure. Each muffler uses fiberglass matting technology to absorb unwanted interior resonance while maintaining a mellow performance tone.

    Product Features:
    • Large internal flow tubes improve exhaust flow and reduce backpressure
    • Exclusive patented flow director design channels exhaust flow and eliminates turbulence on most applications.
    • Fiberglass matting technology to absorb unwanted interior resonance while maintaining a mellow performance tone
    • Dyno proven to flow up to 700 SCFM
    See More

    Flowmaster Inc. – 40 Series Muffler, 2in Offset Inlet 2in Center Outlet, Non-Reversible, Aggressive Sound (Part No.942041)

    40 Series Muffler, 2in Offset Inlet 2in Center Outlet, Non-Reversible, Aggressive Sound

    from

    $133.99
    This two chamber design incorporates Flowmaster’s patented Delta Flow technology. The Delta deflectors generate increased scavenging for better performance and reduced interior sound. Milder exterior tone and reduced interior resonance over Original 40 series. Constructed of 16 gauge aluminized steel and fully MIG welded for maximum durability.
    See More

    Dynomax – Exhaust Tail Pipe (Part No.45173)

    Exhaust Tail Pipe

    from

    $75.99
    Made from quality materials for durability, DynoMax pipe is manufactured with precision benders and fixture checked to ensure a precise fit for quick and easy installation.

    Product Features:
    • IMPROVED FLOW CAPACITY — Mandrel bends (where applicable) improve flow capacity over traditional bends while increased pipe diameter from OE sizes increases flow and power
    • DESIGNED TO PERFORM — Fixture checked to ensure a precise fit for quick and easy installation
    • AVAILABLE IN DIFFERENT SIZES — Offered in a variety of styles and sizes for a quality vehicle repair
    • PREMIUM MATERIALS?–?Made from aluminized steel for durability and long life
    • BETTER TOGETHER — Use premium DynoMax accessories when installing DynoMax mufflers and exhaust systems for a complete performance exhaust system upgrade
    See More

    Most Popular 1985 Ford Ranger Performance Oil Filters

    Customize your Ford with 1 Performance Oil Filters products like Performance Oil Filters, all priced under $97.99.

    Mr. Gasket – Remote Oil Filter Kit (Part No.7682)

    Remote Oil Filter Kit

    from

    $97.99
    This kit relocates the oil filter for quick, clean and easy access and increased filtering. It is complete with precision die cast aluminum by-pass, filter brackets and all high pressure connectors.

    Product Features:
    • Relocate oil filter to an easy access location
    See More

    Top Picks for 1985 Ford Ranger Performance Engines

    Upgrade Ford Rangers with top-quality Performance Engines parts, including 1 OEM and aftermarket selections for your 1985 model.

    FEL-PRO Performance – Cylinder Head Gasket: Steel Core Composite, Without Head Bolts (Part No.1035)

    Cylinder Head Gasket: Steel Core Composite, Without Head Bolts

    from

    $82.99
    Fel-Pro Performance Gaskets deliver reliable sealing under grueling racing conditions

    Product Features:
    • Fel-Pro Performance head gaskets accommodate the high cylinder pressures and cylinder head movement associated with performance engines.
    • Inserted within a stainless steel armor surrounding each cylinder, wire ring design provides highly concentrated sealing around the combustion chamber.
    • Raises combustion sealing force to roughly three times that of standard head gaskets.
    • Steel wire rings for the greatest combustion seal strength.
    • Not intended for use in emission controlled vehicles.
    See More

    In-Demand Performance Ignition Products for 1985 Ford Rangers

    Select from 5 premium Performance Ignition Products parts for your 1985 Ford Ranger, with prices ranging from $65.99 to $186.99.

    Mallory – Unilite Ignition Module (Part No.605)

    Unilite Ignition Module

    from

    $85.29
    Mallory’s UNILITE (R), and magnetic breaker less ignition modules are self contained module assemblies which have no moving parts to wear out. Using Mallory’s time tested breaker less ignition circuit, combined with modern surface mount thermal-clad construction, these ignition modules can drive both OEM and high performance ignition coils. For best results always use a Mallory PROMASTER coil or a Mallory chrome electronic ignition coil. These are also an excellent choice for triggering one of the Mallory HyFire series of electronic ignition controls. Hookup is as easy as a three wire connection.

    Product Features:
    • Service Part
    • No Moving Parts To Wear Out
    • Self Contained Unit
    • Can Drive OEM
    • Can Drive High Performance Ignition Coils
    See More

    Accel – Ford 1984-98 Eec-Iv Supercoil (Part No.140012)

    Ford 1984-98 Eec-Iv Supercoil

    from

    $77.99
    Engineered with optimized low resistance, high turns ratio windings around an M36 high silicone magnetic steel E-core for higher energy and voltage outputs. Results in quicker starts, improved idle quality, and crisper throttle response. Compatible with late model Ford EEC-IV computer controlled ignition system equipped with a TFI distributor. Direct OEM replacement. Can also be used with an ACCEL, Mallory, Crane, Holley or MSD capacitive discharge ignition system. Special high temperature epoxy resists shock and vibration, while increasing thermal conductivity. Brass coil wire contact increases energy efficiency and resists corrosion better than aluminum. High dielectric strength ACCEL Yellow over-molded housing.

    Product Features:
    • Direct Plug In Replacement Direct OE Fit
    • Advanced Bobbin Technology
    • Standard Motor Products SMP Fd-478
    • MSD 5527
    • Standard Motor Products SMP Fd-478
    • MSD 5527
    • Resists Shock And Vibration
    • Resists Corrosion
    See More

    MSD Ignition – Coil; Street Fire; Ford TFI (Part No.5527)

    Coil; Street Fire; Ford TFI

    from

    $65.99
    These new coils mount directly in place of the factory coils and accept the factory connectors. Spark energy is increased thanks to improved materials and windings that were spec’d by MSD engineering.

    Product Features:
    • Bolt-on Performance
    • Factory replacement coil
    See More

    Accel – Ford Tfi Modulator 1983-96 (Part No.35368)

    Ford Tfi Modulator 1983-96

    from

    $96.99
    This high performance ignition module provides your plugs with more spark over the stock module. The solid state electronics provide high coil out put and superior reliability. The Dwell control circuit ensures, long consistent coil charging. The current control circuit protects against coil over heating. This module fits most Ford Thick Film Ignition systems. 1983 thru 1996.

    Product Features:
    • Fits Most Stock And Modified Distributors
    • Dwell Control Circuit
    • Resists False Triggering
    See More

    Mallory – Promaster Classic Series; Ignition Coil (Part No.29440)

    Promaster Classic Series; Ignition Coil

    from

    $186.99
    Universal street and strip. For street-driven vehicles with breaker point ignition or OE electronic ignition. Delivers optimum performance when used with these Mallory ignition products: UNILITE (R) distributor with a HYFIRE (R) capacitive discharge ignition, magnetic breaker less distributor with a HYFIRE (R) capacitive discharge ignition, or dual point distributor. Effective to approximately 6500 RPM when used with a point type distributor (depending on engine combination). Effective to approximately 8000 RPM when used with a Mallory HYFIRE electronic ignition control (depending on engine combination).

    Product Features:
    • Glass Filled Polyester Case
    • Longer Spark Duration
    • Increased Performance
    • No Energy Loss Due To Arcing
    • Includes Brass Contact Terminal
    See More

    Most Sold 1985 Ford Ranger Performance Steering Products

    Explore our best-selling Ford parts for the 1985 Ranger among 3 OEM and aftermarket options starting from $9.99.

    Energy Suspension – Tie Rod Dust Boot (Part No.9.13101R)

    Tie Rod Dust Boot

    from

    $9.99
    Repair torn and worn-out boots of suspension tie rod ends – without having to buy the entire and expensive tie rod. Adds durability surpassing most OEM rubber boots. Exclusive 5 point sealing action. Choose from four sizes and round or octagon styles. Made of Energy’s Hyper-Flex performance polyurethane for added performance and durability.

    Product Features:
    • Easy to Install
    • Superior Material
    • Saves Your Tie Rods
    • Lasts Longer
    • Looks Great
    See More

    Rancho – Single Steering Damper Kit (Part No.RS97481)

    Single Steering Damper Kit

    from

    $117.99
    Designed to reduce wheel shimmy and end vibration caused by larger tires, the Rancho® steering stabilizer kit cuts down on steering arm fatigue to improve handling. The kit includes one Rancho RS5000® steering stabilizer and installation brackets.

    Product Features:
    • COMPATIBILITY — Designed for a variety of Ford trucks and SUVs
    • IMPROVED HANDLING AND PERFORMANCE — Reduces wheel shimmy, bump steer and vibration which helps minimize on- or off-road driver fatigue
    • ACCOMMODATES LARGER TIRES — Engineered for vehicles with oversized wheels and tires.
    • ENGINEERED TO LAST — Features protective boot to shield shock rod and oil seal and 0.25-in. high-strength, low-alloy steel bracket construction for long life
    • EASY TO INSTALL — Includes one Rancho RS5000® steering stabilizer and brackets that bolt directly to factory steering linkage with included mounting hardware, no modifications needed
    • RESISTS CORROSION — Durable black powder-coated and/or zinc-plated brackets resist rust and corrosion
    • PRECISION DESIGN — Brackets are CNC cut and bent to exact specifications for a perfect fit
    See More

    Energy Suspension – Body Cab Mount Set (Part No.4.4103G)

    Body Cab Mount Set

    from

    $103.99
    Will replace distorted and worn-out original rubber mounts to maintain car body and truck cab to bed alignment. Original rubber mounts are so soft they often crack, distort, and crush so badly they often fall off and aluminum body mounts are too harsh for street use that they tend to break and cause other components to break. Energy’s specially formulated Hyper-Flex polyurethane cab and body mounts combine the best qualities of both: they’re soft enough for a smooth ride, yet rugged enough for the most demanding road or track. Most sets have a strong zinc plated steel ring molded into them – for added durability and when the application requires it.

    Product Features:
    • Assures Longer Lasting Cab to Bed Alignment
    • Replace to Restore Ride Height
    • Gain Durability
    • Stronger Than Original Rubber Mounts
    See More

    Top-Rated Performance and Racing Products Brands For Your 1985 Ford Ranger

    Shop for the best-rated brands offering Performance and Racing Products and other products for your 1985 Ford Rangers. Below you’ll find some of our best rated Performance and Racing Products from Accel and Energy Suspension, and more. Performance and Racing Products from these brands that fit a 1985 Ranger start at just $9.99 and are rated as high as 4 stars. OEM and aftermarket Performance and Racing Products don’t get more top quality, durable, and affordable than from the brands below.

    Popular Accel 1985 Ford Ranger Performance and Racing Products

    When it comes to maintaining or upgrading your 1985 Ford Ranger, using quality Performance and Racing Products is essential to ensure durability and a perfect fit. Accel ticks all of those boxes. We offer a wide selection of Accel Performance and Racing Products, specifically designed for the 1985 Ford Ranger. With over 2 Accel brand Performance and Racing Products in stock, you’re sure to find what you need. The prices for these top-notch parts start as low as $77.99, with an average price of just $87.49. Plus, with over 31 customer reviews and an average rating of 4 stars, you can trust that our Accel Performance and Racing Products will get the job done right. Choose Advance Auto Parts for reliability, quality, and expert-approved parts that keep your vehicle running strong.

    Ford 1984-98 Eec-Iv Supercoil
    from
    $77.99

    (28)

    Ford 1984-98 Eec-Iv Supercoil

    “No complaints. Good priced coil for tune up.”

    Ford Tfi Modulator 1983-96
    from
    $96.99

    (3)

    Ford Tfi Modulator 1983-96

    “Check out part number 35369 if you have a 5 speed car. Most catalogs at part stores list the incorrect module for the application.”

    Popular Energy Suspension 1985 Ford Ranger Performance and Racing Products

    Energy Suspension auto parts is one of the highest quality Performance and Racing Product brands in the market. Any 1985 Ford Ranger owner should feel confident when installing genuine Energy Suspension parts in their vehicle. To ensure the best fit and performance for your 1985 Ranger, Advance Auto Parts carries a full inventory of 9 Energy Suspension Performance and Racing Products. Plus you will be keeping your Ford in peak condition while saving money because prices on these Energy Suspension Performance and Racing Products range from $9.99 to $103.99, plus, with more than 3 customer reviews and an impressive 4 stars average rating, you can be confident the Fram Performance and Racing Products below will deliver on both quality and value.

    TransMt
    from
    $80.99
    This product is not rated

    TransMt

    “”

    TransMt
    from
    $72.99
    This product is not rated

    TransMt

    “”

    Axle Pivot Bushing Set
    from
    $30.99
    This product is not rated

    Axle Pivot Bushing Set

    “”

    FAQs for 1985 Ford Ranger Performance and Racing Products

    Which Performance and Racing Products are best-sellers for 1985 Ford Rangers?

    Out of 28 Performance and Racing Products that fit 1985 Ford Rangers, the following parts are the top sellers:

    What’s the price range for 1985 Ford Ranger Performance and Racing Products?

    Performance and Racing Product prices for the 1985 Ford Ranger start at $9.99 and go up to $441.99 for the most premium parts.

    What’s the average price of a Performance and Racing Product for a 1985 Ford Ranger?

    The average price for Performance and Racing Products for the 1985 Ford Ranger is $98.75. Keep in mind the variety of part types within our Performance and Racing Product category so you are likely to find a wide range of prices across a variety of parts and components.

    Does Advance Auto Parts sell Performance and Racing Products for other Ford Ranger model years?

    Yes, we currently carry Performance and Racing Products for 33 model years of Ford Rangers between 1983 and 2023. Performance and Racing Products are bought most frequently for the following model years: 2023, 2022, 2021, 2020, 2019, 2011, 2010, 2009, and 2008.

    What are the cheapest Performance and Racing Products for my 1985 Ford Ranger?

    The cheapest 1985 Ford Ranger Performance and Racing Products we carry in stock are:

    What types of Performance and Racing Products do you sell for my 1985 Ford Ranger?

    Can I get help with 1985 Ford Ranger Performance and Racing Product orders?

    Contact our customer support team, by chat or phone, through the help desk page, where you can find instant answers about Ford Performance and Racing Products and more.

    What is your return policy for Ford Ranger Performance and Racing Products?

    Advance Auto Parts keeps returns simple. For new Ford Ranger Performance and Racing Products and accessories, your online orders can be returned, in their original condition, within 45 days. For requirements, see the returns page.