1985 Ford Mustang Fuel Injectors
More 1985 Ford Mustang Fuel Injectors
Find your specific 1985 Ford Mustang original or aftermarket Fuel Injectors below. Order your parts online and have delivered to your home or pick up in-store at Advance Auto.
Essential 1985 Ford Mustang Fuel Injectors
Motorcraft – Fuel Pres. Reg. O-Ri (Part No.C3002374042MTR)
from
$12.77
Fuel Pres. Reg. O-Ri
Carquest Premium – Mass Air Flow Sensor (MAF) – 100% NEW (Part No.MQ6212)
from
$92.99
Advance Auto Parts is proud to carry all new mass air flow sensors that use high-quality components with the highest quality standards.
Product Features:
See More
Product Features:
- CARQUEST MAF use all new high-quality components at the highest quality standards.
- Manufactured with new and advanced technology to perform, fit and function at OE specifications.
- All new product that is tested with OEM equipment to OEM standards
- Outperforms competition when tested in extreme environmental conditions
BSE Original – Mass Air Flow (MAF) Sensor (Part No.29039)
from
$134.99
Blue Streak Electronics is the leader in remanufactured electronics since 1987 and a name synonymous with OE performance. Blue Streak Electronics provides the highest quality, most comprehensive line of Engine, Transmission, Body, Powertrain control modules, Mass Air Flow Sensors, Diagnostic tools and Flash Programming solutions.
Product Features:
See More
Product Features:
- BSE mass air flow sensors are 100% tested to perform like new. OEM designs are analyzed, and design upgrades are implemented when necessary to provide improved durability over the OEM design.
- Sensors are validated for extended run, extreme hot and cold, over-voltage, over-current, and shock and vibration.
- Guaranteed to match vehicle requirements for performance, drivability, fuel economy and emissions.
- All parts are THE ORIGINAL parts your car was built with. All parts are validated for on car fit, form, and function.
Carquest Premium – Mass Air Flow Sensor (MAF) – 100% NEW (Part No.MQ6206)
from
$75.99
Advance Auto Parts is proud to carry all new mass air flow sensors that use high-quality components with the highest quality standards.
Product Features:
See More
Product Features:
- CARQUEST MAF use all new high-quality components at the highest quality standards.
- Manufactured with new and advanced technology to perform, fit and function at OE specifications.
- All new product that is tested with OEM equipment to OEM standards
- Outperforms competition when tested in extreme environmental conditions
Carquest – Fuel Injector Seal Kit (Part No.274838)
from
$8.99
High-quality products that meet OE appearance and performance to provide professional technicians and DIYers with a cost-effective solution.
Product Features:
See More
Product Features:
- Designed to OE standards for ease of installation
- High-quality materials withstand extreme conditions
- Undergoes extensive testing to ensure reliability
- As a global manufacturer of automotive aftermarket products, we maintain complete quality control throughout the manufacturing process
Carquest Premium – Fuel Injector Seal Kit (Part No.AS051)
from
$8.29
CARQUEST fuel injector seal kits include the necessary O-rings and seals to properly reseal the injector, which is a recommended practice any time the injector is removed. Each kit services one injector and includes hard to find or previously dealer-only components.
Product Features:
See More
Product Features:
- Premium OE quality materials
- Services one injector
ACDelco – Fuel Injector Fuel Feed and Return Pipe O-Ring Kit with Seals with 2 O-Rings (Part No.217-3414)
from
$10.29
The ACDelco Professional Fuel Injector Seal Kit contains high quality aftermarket replacement components for one or more of the following vehicle systems: ignition, and/or engine fuel management. This premium aftermarket kit contains components that are manufactured to meet or exceed your expectations for fit, form, and function.
Product Features:
See More
Product Features:
- Professional, premium aftermarket replacement
- Provides the performance and dependability you expect from ACDelco
- Manufactured to meet expectations for fit, form, and function
ACDelco – Fuel Injector Fuel Feed and Return Pipe O-Ring Kit with 8 O-Rings (Part No.217-3365)
from
$9.99
The ACDelco Professional Fuel Injector Seal Kit contains high quality aftermarket replacement components for one or more of the following vehicle systems: ignition, and/or engine fuel management. This premium aftermarket kit contains components that are manufactured to meet or exceed your expectations for fit, form, and function.
Product Features:
See More
Product Features:
- Professional, premium aftermarket replacement
- Provides the performance and dependability you expect from ACDelco
- Manufactured to meet expectations for fit, form, and function
Felpro – Fuel Injection Throttle Body Mounting Gasket (Part No.61063)
from
$14.79
Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust
Product Features:
See More
Product Features:
- Meets or exceeds all original equipment specifications
- Application specific design to ensure a perfect fit
- Engineered and manufactured specifically for the repair environment
- Unsurpassed quality you can trust
- Validated for fit, form, and function
Dorman – Help – Idle Air Valve Gaskets (Part No.90102)
from
$4.79
This fuel injection idle air control valve gasket is designed to match the fit and function of the original gasket on specified vehicles, and is engineered for durability and reliable performance.
Product Features:
See More
Product Features:
- Direct replacement – this fuel injection idle air control valve gasket is designed to match the fit and function of the original gasket on specified vehicles
- Restores functionality – this gasket is made to fit and fully restore part functionality after the original gasket fails
- Durable construction – this part is made from quality materials to ensure reliable performance and long service life
- Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience
Felpro – Fuel Injection Throttle Body Mounting Gasket (Part No.61377)
from
$5.99
Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust
Product Features:
See More
Product Features:
- Meets or exceeds all original equipment specifications
- Application specific design to ensure a perfect fit
- Engineered and manufactured specifically for the repair environment
- Unsurpassed quality you can trust
- Validated for fit, form, and function
Felpro – Fuel Injection Plenum Gasket Set (Part No.MS 95925-2)
from
$84.99
Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust
Product Features:
See More
Product Features:
- DESIGNED FOR IMPERFECT SEALING SURFACES — Engineered and manufactured specifically for the repair environment to help seal imperfect sealing surfaces
- SEALING TECHNOLOGIES — Exclusive sealing innovations and technologies with proprietary materials and unique design features to ensure a superior seal for your repair
- ENGINEERING EXPERTISE — Parts are designed, reviewed, validated and approved by Fel-Pro engineers through rigorous research and development
- REAL-WORLD TESTED — Parts are tested on-vehicle and validated to ensure optimal performance on the road
- EVERY PART FOR THE REPAIR — Fel-Pro gasket sets include every part needed for the repair unless otherwise noted
Accel – Perf Fuel Injector 21Lb Each (Part No.150121)
from
$89.99
ACCEL Performance fuel injectors provides precise control of fuel delivery & atomization for increased power and improved throttle response. They are all new units: not modified stock units or remanufactured from used cores. They feature a low-mass disc design that ensures accurate metering control even at ultra-low & high duty cycles and higher fuel pressures. ACCEL performance Injectors can be used with gasoline or E85 and are great for blown applications where increased fuel pressure and precise metering are required. State-of-the-art manufacturing processes reduce flow deviations between injectors, which improve performance. Low- and High-impedance designs are available to match most commercial applications.
Product Features:
See More
Product Features:
- Provides precise control of fuel delivery & atomization for increased power and improved throttle response
- All new units: not modified stock units or remanufactured from used cores
- New low-mass disc design ensures accurate metering control even at ultra-low & high duty cycles
- Operates at higher fuel pressures without loss of metering control
- Great for blown applications where increased fuel pressure and precise metering are required
- State-of-the-art manufacturing processes reduce flow deviations between injectors to improve performance
Motorcraft – Motorcraft Fuel Injector (Part No.C1000399630MTR)
from
$89.63
Motorcraft electric fuel Injectors are built with the knowledge and experience that only comes from being the original equipment (OE) manufacturer.
Product Features:
See More
Product Features:
- Same fuel Injectors installed during vehicle production
- Latest engineering enhancements are incorporated
- Hot fuel handling capabilities translate into consistent performance
- Before they are shipped, fuel Injectors are 100-percent flow-tested
- Units come as complete assemblies for easier, faster installation
Bosch – Port Fuel Injector (Part No.C10001334432BOS)
from
$45.05
Port Fuel Injection (PFI) is the world’s most widely used system for internal combustion engines and offers many advantages for engines with a low pressure output.
Product Features:
See More
Product Features:
- Low-pressure systems are less complex and more affordable than high-pressure systems
- Robust combustion process tolerates lower-quality fuel
- Maintenance-friendly design reduces the overhead for system diagnostics
Carquest Premium – Reman Multi Port Fuel Injector (Part No.A211-1242)
from
$61.99
CARQUEST’S line of remanufactured OEM fuel injectors are remanufactured using a proven 15 step process at a state-of-the-art remanufacturing facility in the U.S.A. Each injector is 100% tested under multiple operating conditions to ensure each injector meets or exceeds OE specifications for flow rate, spray pattern, coil resistance, form, fit and function. Each injector includes new external seals and O-rings.
Product Features:
See More
Product Features:
- Each unit is 100% tested to OE specifications
- Includes new O-rings and seals made of premium OE quality materials
- Includes application specific technical bulletin, where applicable
Felpro – FUEL INJECTOR O-RING SET (Part No.ES 73118)
from
$57.99
Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust
Product Features:
See More
Product Features:
- Meets or exceeds all original equipment specifications
- Application specific design to ensure a perfect fit
- Engineered for the sealing repair environment
- Unsurpassed quality you can trust
- Validated for fit, form, and function
Carquest Premium – Fuel Injector Seal Kit (Part No.AS009)
from
$2.99
CARQUEST fuel injector seal kits include the necessary O-rings and seals to properly reseal the injector, which is a recommended practice any time the injector is removed. Each kit services one injector and includes hard to find or previously dealer-only components.
Product Features:
See More
Product Features:
- Premium OE quality materials
- Services one injector
Carquest Premium – Fuel Injector Seal Kit (Part No.AS055)
Carquest Premium – Fuel Injector Seal Kit (Part No.AS004)
from
$3.49
CARQUEST fuel injector seal kits include the necessary O-rings and seals to properly reseal the injector, which is a recommended practice any time the injector is removed. Each kit services one injector and includes hard to find or previously dealer-only components.
Product Features:
See More
Product Features:
- Premium OE quality materials
- Services one injector
Bosch – Fuel Pressure Sensor (Part No.C3001212139BOS)
from
$76.79
All Bosch High Pressure Sensors provide very reliable and accurate measurements and have extremely fast response times to ensure your vehicle runs as intended.
Product Features:
See More
Product Features:
- Built-in circuit protection to ensure your electronics and computer systems stay unharmed
- High reliability of pressure sensing proved in gasoline and diesel direct injection systems
- Sturdy design, vibration resistant and thermal stability
Wells Vehicle Electronics – Fuel Injection Pressure Regulator (Part No.5G1131)
from
$59.99
WVE is a leading source of advanced vehicle electronics components for replacement applications in the automotive aftermarket and original equipment applications. WVE offers high-technology manufacturing along with innovative solutions and improvements to
See More
Motorcraft – Motorcraft Fuel Pressure Regulator (Part No.C3000197671MTR)
from
$49.25
Motorcraft electric fuel pressure regulators are built with the knowledge and experience that only comes from being the original equipment (OE) manufacturer.
Product Features:
See More
Product Features:
- Same fuel pressure regulators installed during vehicle production
- Latest engineering enhancements are incorporated
- Hot fuel handling capabilities translate into consistent performance
- Units come as complete assemblies for easier, faster installation
Carquest – Fuel Injection Pressure Regulator (Part No.22856)
from
$62.99
High-quality products that meet OE appearance and performance to provide professional technicians and DIYers with a cost-effective solution.
Product Features:
See More
Product Features:
- Designed to OE standards for ease of installation
- Application-specific to ensure the proper fit and form
- Precision-engineered pressure regulators for proper fuel delivery and engine performance
- As a global manufacturer, we have complete control of the manufacturing process, from components to finished product?
Motorcraft – Fuel Injector O-Ring Kit (Part No.C1013388202MTR)
from
$3.37
Motorcraft Fuel Injector O-Ring Kits are manufactured with premium quality in mind
Product Features:
See More
Product Features:
- All parts meet original equipment requirements for fit, finish and durability
- Specifically engineered for Ford and Lincoln vehicles
- Durability tested to meet demanding original equipment service life specifications
- Helps maintain original performance standards
Mahle – Fuel Injector O-Ring (Part No.C10132590067MAH)
from
$8.61
Fuel Injector O-Ring
Popular 1985 Ford Mustang Fuel Injectors Categories
1985 Ford Mustang Fuel Injectors
Maybe you’re in the middle of a full rebuild of that 1985 Ford Mustang. Maybe you just need a couple of Fuel Injectors. Either way, Advance Auto Parts has 18 different Fuel Injectors in our inventory ranging from $3.49 to $117.99. That means you can find the exact parts or products you need to keep that 1985 Ford Mustang running smoothly.
Fuel Injectors are only as good as their brand. We stock 10 different brands to make sure you have plenty of trusted parts to choose from for your 1985 Ford Mustang. Felpro, ACDelco, and Carquest Premium are just some of the brands we stock. Search for brands you know or compare prices and reviews to help you decide!
We know you’ll find the perfect Fuel Injectors for your 1985 Ford Mustang, but don’t take our word for it – read our customer ratings and reviews and buy with confidence. Out of the 111 reviews in this category, some of the top rated parts include Mass Air Flow Sensor with 3.0 stars.
So if you’re in the market for aftermarket Fuel Injectors to keep your 1985 Ford Mustang rolling for years to come, look no further. Shop online and have your products shipped direct to your door, or pick up at the nearest Advance Auto Parts location today!
Fuel Injectors Brands To Make Your 1985 Ford Mustang Last
Simple repair, complete replacement, or a full rebuild. No matter the job, your 1985 Ford Mustang demands trusted brand parts and products to keep it running. Many trusted brands of Fuel Injectors make up Advance Auto Parts’ inventory, and all are ready to help make your Mustang the best it can be. Be sure to browse some of our top Fuel Injectors brands and parts.
Popular Felpro Fuel Injectors
We carry Felpro parts in our stock across Fuel Injector O-Ring Kits categories, plus more. For a 1985 Ford Mustang, our most popular Felpro Fuel Injectors include:
FAQs for 1985 Ford Mustang Fuel Injectors
What are the most purchased Fuel Injectors for the 1985 Ford Mustang?
Out of 18 Fuel Injectors for the 1985 Ford Mustang, the most popular in our inventory are:
from
$9.99
This product is not rated
Fuel Injector Fuel Feed and Return Pipe O-Ring Kit with 8 O-Rings
Fuel Injector Seal Kits
from
$10.29
This product is not rated
Fuel Injector Fuel Feed and Return Pipe O-Ring Kit with Seals with 2 O-Rings
Fuel Injector Seal Kits
What are the top-rated 1985 Ford Mustang Fuel Injectors?
Top-rated Fuel Injectors for your 1985 Ford Mustang based on customer reviews/ratings are:
from
$117.99
(2)
Mass Air Flow Sensor
“MAF SENSOR IMMEDIATELY CLEARED UP INTERMITTENT STARTING PROBLEM. IDLE SMOOTHED OUT.POWER CURVE MATCHED UP PERFECTLY. I HAD PREVIOUSLY CHANGED A LOT OF”
