Name: Oil Filter: Ideal for Conventional Oil, Protection up to 5,000 Miles
Brand: Carquest Standard
SKU: R85515
Price: 5.49 USD
Rating: 4.5 (54 reviews)

from

$5.49

Carquest Standard oil filters are designed to meet the original equipment (O.E.) specifications and the requirements for maintaining new vehicle warranties. Our oil filters use nitrile sealing gaskets and solid steel baseplates to prevent oil leaks. Carquest Standard oil filters feature cellulose media for increased efficiency at capturing dirt and debris. Each Carquest Standard oil filter is built with rugged components for durability and utilizes multifiber, high-density media for optimal engine protection up to 5,000 miles.

Product Features:

Protection for up to 5,000 miles
Cellulose media provides 95.1% efficiency at 20 Microns for increased engine protection
Nitrile anti-drain back valve for engine start-up protection
Lathe cut nitrile sealing gasket prevents leaks
Double fluted spiral wound center tube allows maximum flow and provides additional strength
Solid steel baseplate provides additional strength to resist leakage
Meets requirements for maintaining new vehicle warranties

from

$10.99

PurolatorONE Oil Filters keep engines operating at peak performance with up to 99% Dirt Removal Power. Available for most domestic and import applications, PurolatorONE optimizes engine life for up to 15,000 miles of advanced protection for most vehicles on the road today. Made with a high-density synthetic blend filter media and wear-resistant metal end caps, PurolatorONE maintains its integrity and filtering capabilities between oil changes. PurolatorONE is ideal for a wide range of tough driving conditions, including towing, stop and go traffic, commuting and harsh weather conditions. Offers advanced engine protection, especially when used with all synthetic and high mileage oils.

Product Features:

Up to 15,000 miles – advanced engine protection
Ideal for all synthetic and high mileage oils
99% Dirt Removal Power
High-density synthetic blend media
Silicone anti-drainback valve prevents dry starts
PTFE treated gasket; Heat resistant – stays flexible for advanced leak protection
Metal end caps provide stability and integrity for greater wear resistance

from

$14.99

Provides OE-quality filtration to remove contaminants and extend the life of your transmission. Domestic and import applications available. Where applicable, sure hold gaskets are designed to keep your pan gasket in place during installation. Filtering media may consist of felt, paper, or stainless screens that meet original or exceed original OE specifications. Meets or exceeds all OEM fit and quality requirements. High efficiency filtration. Prevents loose material from re-entering the transmission.

Product Features:

Guaranteed OE quality form, fit and function
Superior quality filter media traps harmful contaminants, ensuring clean transmission fluid to protect your transmission and its components
Premium Sure Hold gaskets hold pan bolts in place for easy installation and guarantee a leak-free seal. Gasket may not be included with every kit.

from

$37.99

AT IN-LINE FLTR 3/8

from

$95.99

For use when relocating the oil filter is necessary. Includes all required hardware except hoses.

Product Features:

Remote mount filter kit
For use when relocation of the oil filter is necessary
Comes with all necessary hardware except hoses

from

$21.99

Helps prevent stalling, poor starting and potential engine failure. Improves vehicle performance by ensuring a uniform fuel flow. Blocks impurities and contaminants in your fuel or gas tank before they can enter your engine or clog your injectors.

Product Features:

Removes 90% of particles 20 microns or larger
Connector and support washers are brazed for enhanced durability and strength
300-series stainless steel case provides excellent corrosion resistance

from

$17.99

CARQUEST offers high quality, high efficiency fuel filters for automotive, medium and heavy trucks as well as farm, construction, mining and other equipment applications.

Product Features:

Keeps dirt, debris and contaminants from clogging fuel lines and causing erratic, unstable fuel performance
Manufactured to a strict quality standards with 98% efficiency at a 10 micron rating.
Provides maximum fuel system protection.
Designed to meet or exceed Original Equipment specifications
Protects the injectors from debris that cause damage and clogging.
Provides less restriction preventing the fuel pump from working too hard.
Superior materials, design and construction ensure CARQUEST fuel filters provide excellent performance under all types of operating conditions.

from

$3.99

Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust

Product Features:

Meets or exceeds all original equipment specifications
Application specific design to ensure a perfect fit
Engineered for the sealing repair environment
Validated for fit, form and function
Unsurpassed quality you can trust

from

$3.99

These oil drain plug gaskets are designed to specific sizes and standards for reliable replacement at every oil change.

Product Features:

Direct replacement – these engine oil drain plug gaskets are made to match the fit and performance of the original equipment components
Restores functionality – built to restore a proper seal
Durable construction – this part is made from quality materials to ensure reliable performance and long service life
Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience

from

$15.99

Carquest premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.

from

$15.99

This PCV valve elbow is designed to match the fit and function of the original elbow on specified vehicles, and is engineered for durability and reliable performance.

Product Features:

Direct replacement – this PCV valve elbow is designed to match the fit and function of the original elbow on specified vehicles
Restores functionality – reliable replacement for an original elbow that is leaking or has failed due to heat and fatigue
Durable construction – this part is made from quality materials to ensure reliable performance and long service life
Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience

from

$4.49

Constructed of quality materials, this multi-purpose retainer provides the same function and versatility as the original equipment retainer ensuring long service life.

Product Features:

Ideal replacement – this retainer matches the fit and function of the original equipment retainer for this vehicle application
Quality material – this retainer is made of durable material for long-lasting service
Versatile design – this retainer is suitable for a variety of automotive uses
Excellent value – this part offers original equipment quality at a competitive cost

from

$5.49

Carquest premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.

from

$37.42

Every Motorcraft PCV Valve delivers the quality performance you have come to expect from Ford Motor Company products. Not only do they help keep harmful particles out of your vehicle system, but Motorcraft filters are also the only filters recommended for Ford and Lincoln vehicles.

Product Features:

Designed for each application – no consolidated part numbers
Help contain contaminants inside the filter
Recommended by Ford Motor Company

from

$42.99

AT FLTR 5/16 D BARB

from

$27.99

Replacement original equipment transmission filters remove contaminants from the fluid, to help the transmission operate as designed. Motorcraft® Automatic Transmission Filters are designed, engineered and tested to help ensure peak transmission performance throughout the life of the filter. Filtration and hydraulic performance testing is performed according to procedures approved by the International Organization for Standardization (ISO) FT-180 © 2021 Ford Motor Company OM-PRJ-1912-0072 Motorcraft® is a registered trademark of Ford Motor Company Filter bypass screen

Product Features:

Each original equipment filter meets the specific needs of its application and intended service life
Filtration efficiency is fine tuned to match each transmission’s fluid cleanliness requirements to help ensure transmission durability throughout the intended life cycle
Original equipment Filters are engineered to maintain fluid flow rates even as wear debris accumulates
Filter housings are constructed from advanced fiber reinforced temperature-resistant polymers or a combination of polymers and stamped steel
Filtration and hydraulic performance testing is performed according to procedures approved by the International Organization for Standardization (ISO) FT-180 © 2021 Ford Motor Company OM-PRJ-1912-0072 Motorcraft® is a registered trademark of Ford Motor Co

from

$17.99

Carquest Standard engine air filters are designed to remove airborne contaminants and optimize engine performance in all driving conditions. Each air filter features cured filter media that increases tensile strength, allowing the filter to maintain high-pressure requirements without collapse. Carquest Standard air filters use a polyurethane construction that provides higher tear strength and more structural support. Our Carquest Standard air filters meet original equipment (O.E.) standards and fulfill the requirements for maintaining a new vehicle warranty.

from

$26.99

Replacing an air filter every 12 months or 12,000 miles can have a significant impact on engine performance and efficiency. PurolatorONE┐ Air Filters trap up to 99% of dirt, dust, soot and other debris, helping to protect your engine from damage. A new air filter may also help prevent engine wear, improve fuel efficiency and can even improve acceleration by up to 11% (U.S. DOE study). PurolatorONE Air Filters are widely available for most passenger cars and light trucks on the road today. Changing your air filter regularly is an easy way to keep your engine running at peak performance. Full synthetic or highly embossed media for superior strength and dirt holding capacity; Blocks up to 99% of damaging dirt, soot and debris from entering your engine. Optimizes engine airflow with precision fit polyurethane framingHelps improve acceleration and boost engine efficiency. Employs steel grid backing, ridge supports or polyamide high temperature glue beads to provide superior strength and stability. Meets or exceeds OE specifications; Trusted OE supplier

from

$5.29

AGS ACCUFIT Oil Drain Plug is a high-coverage/low-part number program that covers up to 93% of all vehicles on the road, including domestic, European, Japanese, British, and Korean models, while reducing inventory and associated costs by 80%. Reducing stocked part numbers to just 13 and the superior quality built-in features make ACCUFIT your number one choice for oil drain plugs. Easy Install – Finger-grip wing for ease of installation. All plugs have 14mm hex – just one wrench works for all! Hi-Temp Gasket – Red hi-temp gasket for max sealing protection. Easy ID – Thread size etched on each plug. Rust Protection – Black oxide coating for rust and corrosion protection. Avoid Cross-Threading – Pilot-point tip to avoid cross-threading during installation.

Product Features:

Easy Install – Finger-grip wing for ease of installation
All plugs have 14mm hex – just one wrench works for all
Hi-Temp Gasket – Red hi-temp gasket for max sealing protection

from

$5.49

This engine oil drain plug is designed to match the fit and function of an original equipment plug on specified vehicles. It is engineered to replace a missing or damaged plug and help ensure a secure seal.

Product Features:

Direct replacement – this engine oil drain plug is designed to match the fit and function of an original equipment plug on specified vehicles
Ideal solution – engineered to replace a missing or damaged plug and help ensure a secure seal
Durable construction – designed and manufactured to strict specifications for reliable performance
Trustworthy quality – backed by a team of product experts in the United States and more than a century of automotive experience

from

$12.99

OE style that looks and fits like the OE cap.

Product Features:

Cam on style

from

$20.99

Carquest premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.

from

$5.99

This PCV valve grommet is designed to match the fit and function of the original grommet on specified vehicles, and is engineered for durability and reliable performance.

Product Features:

Direct replacement – this PCV valve grommet is designed to match the fit and function of the original grommet on specified vehicles
Restores functionality – this grommet is made to fit and fully restore part functionality after the original grommet fails
Durable construction – this part is made from quality materials to ensure reliable performance and long service life
Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience

from

$4.29

This PCV valve grommet is designed to match the fit and function of the original grommet on specified vehicles, and is engineered for durability and reliable performance.

Product Features:

Direct replacement – this PCV valve grommet is designed to match the fit and function of the original grommet on specified vehicles
Restores functionality – this grommet is made to fit and fully restore part functionality after the original grommet fails
Durable construction – this part is made from quality materials to ensure reliable performance and long service life
Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience

from

$4.49

Crankcase Breather Filter

1985 Ford E-150 Econoline Club Wagon Filters and PCVs

More 1985 Ford E-150 Econoline Club Wagon Filters and PCVs Categories

Essential 1985 Ford E-150 Econoline Club Wagon Filters and PCVs

Carquest Standard – Oil Filter: Ideal for Conventional Oil, Protection up to 5,000 Miles (Part No.R85515)

Purolator ONE – Oil Filter: Ideal for High Mileage & Synthetic Oil, Protects to 15,000 miles (Part No.PL24651)

Carquest Premium – Automatic Transmission Filter Kit: Sump, Original Equipment Fit, Form And Function, 1 Pack (Part No.85939)

ATP – AT IN-LINE FLTR 3/8 (Part No.JX-160)

Imperial – Remote Mount Filter Kit – Universal (Part No.240291)

Motorcraft – OEM Fuel Filter Defends Engine from Impurities, Contaminants, & Injector Clogs (Part No.FG-1114)

Carquest Premium – 5/16" Inlet-Outlet Metal In-Line Fuel Filter (Part No.86296)

Felpro – Engine Oil Drain Plug Gasket (Part No.72515)

Dorman – Help – Nylon Rib Drain Plug Gasket, Fits M12 (Part No.69000)

Carquest Premium – PCV Valve Grommet (Part No.PCA1118)

Dorman – Help – PCV End Assembly (Part No.46022)

Dorman – Ford Radiator Core Support Retainer (Part No.961-055D)

Carquest Premium – PCV Valve (Part No.PCA1046)

Motorcraft – Motorcraft PCV Valve (Part No.B2040201831MTR)

ATP – AT FLTR 5/16 D BARB (Part No.JX-151)

Motorcraft – Automatic Transmission Filter: Original Equipment on Ford Motor Company Vehicles, 1 Pack (Part No.FT-105)

Carquest Standard – Engine Air Filter: Meets Original Equipment Specifications (Part No.R88418)

Purolator ONE – Advanced Filtration Engine Air Filter: Full Synthetic Highly Embossed Media, Up To 99% Dirt Removal (Part No.A34878)

Accufit – Oil Drain Plug, 1/2"-20 (Part No.ODP-00016B)

Dorman – Standard Engine Oil Drain Plug: 1/2-20 Thread, 7/8 " Head, 1 Pack (Part No.090-005CD)

Carquest Premium – Engine Oil Filler Cap: 10071, Push Fit, Direct Fit, Provides Tight Seal, 1 Pack (Part No.10071)

Carquest Premium – PCV Valve Grommet (Part No.PCA1214)

Dorman – Help – PCV Valve Grommet – 0.715 In. ID – 1.440 In. OD – 0.493 In. Thickness (Part No.42049)

Dorman – Help – PCV Valve Grommet – 0.470 In. ID – 1.478 In. OD – 0.534 In. Thickness (Part No.42051)

Purolator – Crankcase Breather Filter (Part No.B43127)

Popular 1985 Ford E-150 Econoline Club Wagon Filters and PCVs Categories

1985 Ford E-150 Econoline Club Wagon Filters and PCVs

Top-Rated Filters and PCVs Brands For Your 1985 Ford E-150 Econoline Club Wagon

Popular K&N Filters and PCVs

Top-Rated PurolatorBOSS Filters and PCVs

FAQs for 1985 Ford E-150 Econoline Club Wagon Filters and PCVs

What are the most purchased Filters and PCVs for the 1985 Ford E-150 Econoline Club Wagon?

What are the top-rated 1985 Ford E-150 Econoline Club Wagon Filters and PCVs?