1985 Chevrolet Corvette Exhaust Parts
Find Your Specific 1985 Chevrolet Corvette Exhaust Parts
Below you will find various in-demand Chevrolet Exhaust Parts, components and accessories for your 1985 Corvette. Advance Auto Parts has popular Corvette parts like Exhaust Mufflers, Exhaust Pipes, Exhaust Hangers and more. You’ll also find aftermarket and OEM Exhaust Parts for other Corvette model years including
2014,
2015,
2016,
2017,
2018,
2019,
2020,
2021,
2022 and more. Select a category of 1985 Chevrolet Corvette Exhaust Parts below and start saving instantly.
Popular 1985 Chevrolet Corvette Exhaust Parts Categories
Essential Exhaust Parts for 1985 Chevrolet Corvettes
Flowtech – HEADER FLT BLOCK HUGGER (Part No.10010FLT)
from
$84.99
HEADER FLT BLOCK HUGGER
MagnaFlow – Semi-Direct Fit HM Grade Federal / EPA Compliant Catalytic Converter (Part No.93989)
from
$1038.99
Keep the check engine light off with MagnaFlow HM Grade Federal/EPA Compliant Semi-Direct-Fit Catalytic Converter 93989. With features including free-flowing mandrel-bent tubing and highly corrosion resistant stainless steel construction, easily install this converter yourself using the proper tools, no welding required. MagnaFlow’s state-of-the-art metrology department uses the latest 3D scanning systems during research and development, so you can be confident that your new part will fit and function like the original equipment. By replicating the OE design, the single laser fusion weld greatly reduces the possibility of a leak, and our compact, low-mass design also allows for greater thermal efficiency. MagnaFlow 93989 includes (2) Donut Gaskets. This replacement part is designed to meet or exceed Federal emissions requirements set forth by the EPA, complying with legal standards for OBDII Federally registered vehicles with Federal/EPA Emission systems.
Product Features:
See More
Product Features:
- Your trusted source for EPA-compliant catalytic converters, providing assurance of genuine compliance while delivering quality that will last
- Mandrel bent tubing retains OEM-like design and geometry, ensuring smooth exhaust flow for peak fuel economy and engine operation
- Expertly formulated catalyst blend maximizes efficiency, ensuring optimal emissions control to keep your check engine light off
- High strength 16 gauge 409 stainless steel tubing for exceptional corrosion resistance and maximum service life
- Simplifies installation with essential gaskets and hardware being included in the box
- Durable 308 stainless steel MIG welds
MagnaFlow – Universal Standard Grade Federal / EPA Compliant Catalytic Converter (Part No.53006)
from
$99.99
Keep the check engine light off with MagnaFlow Standard Grade Federal/EPA Compliant Universal Catalytic Converter 53006. Get the right fit for a wide array of vehicles thanks to the adaptable Universal design. With highly corrosion resistant, stainless steel construction, you can have confidence in the quality of this catalytic converter. This replacement part is designed to meet or exceed Federal emissions requirements set forth by the EPA, complying with legal standards for pre-OBDII Federally registered vehicles.
Product Features:
See More
Product Features:
- Durable 308 stainless steel MIG welds
- High strength 16 gauge 409 stainless steel tubing for exceptional corrosion resistance and maximum service life
- Durable 308 stainless steel MIG welds
- Expertly formulated catalyst blend maximizes efficiency, ensuring optimal emissions control to keep your check engine light off
- Compact, lightweight construction enables installation in confined areas, welding is required
Walker – Standard EPA Direct Fit Catalytic Converter – 3" Inlet (ID) 3.75" Outlet (OD) (Part No.15622)
from
$377.99
Designed to provide the required reduction in tailpipe emissions and meet EPA emissions requirements with assured compliance, Walker Standard direct-fit catalytic converters are available for pre-OBD (1995 and older) vehicles.
Product Features:
See More
Product Features:
- EPA COMPLIANT – For use on pre-OBDII vehicles, 1995 and older. Not legal for sale or use in CA, CO and NY. Legal in ME on all pre-OBD vehicles only. Consult your state’s aftermarket converter regulations for details.
- DIRECT-FIT DESIGN – Direct-fit bolt-on replacement solution with OE-style hangers, brackets, routings and heat shields for easy installation that doesn’t require specialized fabrication and welding
- STRONG AND DURABLE – Features thick OE-style flanges, hangers and brackets for strength and durability
- OE-STYLE DESIGN – Features aluminized heat shields when originally equipped, to match OE design, protecting the undercarriage from heat created by the converter
- BUY WITH CONFIDENCE – Backed by Walker’s 25,000-mile/40,000-kilometer emissions and 5-year 50,000-mile/80,000-kilometer structural integrity limited warranty. Visit Walkerexhaust.com for details.
Taylor Gaskets – Vibe-Lock Bolt (Part No.310016)
from
$89.99
Vibe-Lock Bolt
ARP Auto Racing – For Use With Chevy Big Block, 3/8"-16, 1"L, 12Point Head, Natural, Ss, Set Of 16 (Part No.400-1212)
from
$71.99
ARP manufactures a variety of premium grade bolt and stud kits to facilitate installation of exhaust headers including the popular stainless stud kit with 12 point nuts. The Stainless 300 material is not affected by corrosion or extreme heat, making it ideal for the application.
Product Features:
See More
Product Features:
- Material Is Not Affected By Corrosion Or Extreme Heat
- The Compact 12-Point Nut Lets You Easily Slip A Socket Close To The Pipe
- Substantially Stronger Than Grade 8 Hardware
- Nominally Rated At 170,000 PSI Tensile Strength
- 3/8″-16 Thread Size
- 1″ Underhead Length
Dorman – Help – Exhaust Manifold Hardware Kit (Part No.03413B)
from
$17.99
This exhaust manifold hardware kit matches the original hardware required to secure the exhaust manifold to the engine on specified vehicles, and is made from quality materials for reliable performance.
Product Features:
See More
Product Features:
- Direct replacement – this exhaust manifold hardware kit matches the original hardware required to secure the exhaust manifold to the engine on specified vehicles
- Ideal solution – this kit is a reliable replacement for the original hardware that is missing or damaged, or has failed
- Durable construction – this kit is made from quality components to ensure reliable performance and a long service life
- Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience
Dorman – Double Ended Stud Kit – 3/8-16 x 1-1/4 in and 3/8-16 x 7/16 in (Part No.29200)
from
$10.99
This exhaust flange stud and nut are designed to match the fit and function of the original hardware on specified vehicles. Made of quality materials, this hardware is engineered for reliable performance.
Product Features:
See More
Product Features:
- Direct replacement – this exhaust flange stud and nut are designed to match the fit and function of the original hardware on specified vehicles
- Ideal solution – this stud and nut are reliable replacements for original parts that are missing or have failed due to wear
- Durable construction – these parts are made from quality materials to ensure reliable performance and Length service life
- Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience
Dorman – Help – Exhaust Stud Kit – M10-1.5 x 62mm (Part No.03133)
from
$17.99
Our exhaust manifold flange kit includes all necessary studs and nuts for a complete repair.
Product Features:
See More
Product Features:
- Direct replacement – this exhaust flange stud and nut are designed to match the fit and function of the original hardware on specified vehicles
- Ideal solution – this stud and nut are reliable replacements for original parts that are missing or have failed due to wear
- Durable construction – these parts are made from quality materials to ensure reliable performance and long service life
- Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience
Dorman – Help – Exhaust Flange Stud Kit – M10-1.5 x 62mm Stainless Steel (OE Fix) (Part No.03133HP)
from
$28.99
The factory-style fasteners used to secure the exhaust manifold to the pipe flange on certain vehicles are prone to cracking and failure from extreme thermal cycles and corrosion. This convenient Dorman OE FIX hardware kit contains six application-specific M10-1.5 studs and nuts made of 100 percent stainless steel that provide superior strength and resistance to corrosion. These fasteners are precision-manufactured to match the fit and function of the original equipment hardware, and help ensure a professional and more durable repair. The kit contains the studs and nuts required to join both manifolds to the manifold flanges.
Product Features:
See More
Product Features:
- Upgraded hardware – this set of six M10-1.5 exhaust manifold mounting studs and nuts are 100 percent stainless steel for superior heat and corrosion resistance
- Convenient solution – kit contains all the application-specific hardware necessary to join one exhaust manifold to one manifold flange
- Matches fit – this hardware matches the fit and function of the factory fasteners, while offering superior durability
- Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience
Flowtech – Terminator; Exhaust Tips (Part No.59905FLT)
from
$93.99Product Features:
- Show Quality Chrome Platinum
- Durable Black Finish
- Can Be Welded Or Clamped
- Complete The System
- Glass-Packed Resonators
JBA Performance – 1815S-1Js 1 5/8" Header Shorty Stainless Steel Chev Center Exit Pre-Lt1 Heads Silver Ceramic (Part No.1815S-1JS)
from
$717.99
JBA shorty headers are one of the best performance upgrades available for any application. Hot Rodmagazine rated headers as one of the top 10 power parts installed on a vehicle. JBA shorty headers aresignificantly less restrictive than the stock manifol
Product Features:
See More
Product Features:
- JBA Performance Exhaust 1815S-1JS 1 5/8″ Header Shorty Stainless Steel Chev Center Exit Pre-LT1 Heads Silver Ceramic
- Mandrel bent stainless steel tube
Flowtech – Standard Header (Part No.11106FLT)
from
$255.99Product Features:
- Fuel Economy From The Engine
- Leak Test For Max Performance
- Mandrel-Formed Power Plenum
- Leakproof O-Ringed Port Seals
- Include All Mounting Hardware
Hooker BlackHeart – Hooker BlackHeart Shorty Headers (Part No.70301303-RHKR)
from
$1407.00
Product Features:
See More
- Max gains of 15 HP and 14 lb. ft. Torque
- Constructed of 1 3/4″ diameter mandrel-bent, 18-gauge 304SS tuned length primary tubes
- 3/8″ thick 304SS flanges for durability & large sealing surface
- Utilizes true mitered merge collectors designed to maximize exhaust velocity and scavenging resulting in a broad torque curve
- Retains factory catalytic converters
- Comes with all hardware & O2 extensions to utilize factory O2 Sensor
- 100% bolt-on with no modifications necessary, direct replacement for factory Cast Iron Manifold
- Easy Installation
- Manufacturer’s Limited Warranty
- C.A.R.B. EONo. D-115-20
Walker – Exhaust Pipe Flange Gasket (Part No.31537)
from
$4.99
Complete your exhaust repair with Walker gaskets and flanges. Available in a variety of styles and sizes, they’re designed to work with OE exhaust components and Walker aftermarket replacement parts.
Product Features:
See More
Product Features:
- AVAILABLE IN DIFFERENT SIZES – Offered in a variety of styles and sizes for a quality vehicle repair
- HEAT RESISTANT – Designed to resist heat for long-lasting performance
- PREMIUM MATERIALS – Made from high-quality materials for durability and long life
- ENGINEERING EXPERTISE – Parts are reviewed and validated and approved by Walker engineers through rigorous research and development
- REAL-WORLD TESTED – Parts are tested on-vehicle and validated to ensure optimal performance on the road
- EASIER TO INSTALL – Featuring slotted bolt holes (where applicable) for easy installation, gasket slips into place
- BETTER TOGETHER – Use premium Walker accessories when installing Walker catalytic converters and mufflers for a complete exhaust system upgrade
Walker – Exhaust Pipe Flange Gasket (Part No.31624)
from
$5.99
Complete your exhaust repair with Walker gaskets and flanges. Available in a variety of styles and sizes, they’re designed to work with OE exhaust components and Walker aftermarket replacement parts.
Product Features:
See More
Product Features:
- AVAILABLE IN DIFFERENT SIZES – Offered in a variety of styles and sizes for a quality vehicle repair
- HEAT RESISTANT – Designed to resist heat for long-lasting performance
- PREMIUM MATERIALS – Made from high-quality materials for durability and long life
- ENGINEERING EXPERTISE – Parts are reviewed and validated and approved by Walker engineers through rigorous research and development
- REAL-WORLD TESTED – Parts are tested on-vehicle and validated to ensure optimal performance on the road
- EASIER TO INSTALL – Featuring slotted bolt holes (where applicable) for easy installation, gasket slips into place
- BETTER TOGETHER – Use premium Walker accessories when installing Walker catalytic converters and mufflers for a complete exhaust system upgrade
Mr. Gasket – Ultra-Seal Exhaust Gaskets – Hi-Temp Graphite – Small Block Chevy Oval Port – 1.50"W X 1.82"H (Part No.5917)
from
$51.99
Manufactured from high-temperature steel core/graphite faced exhaust material. Expanded steel core provides stability and maximum torque retention to eliminate gasket failure. Graphite facing provides excellent heat resistance and thermal conductivity to transfer heat away from the cylinder head. Conforms to and seals minor surface irregularities. High recovery material allows header or manifold flange to stay sealed if flange loses clamp-load. Can be trimmed if necessary for modified port applications. For original equipment replacement, high performance street, drag race and oval track use.
Product Features:
See More
Product Features:
- Manufactured from high-temperature steel core/graphite faced exhaust material
- Expanded steel core provides stability and maximum torque retention to eliminate gasket failure
- Graphite impregnated facing provides excellent heat resistance and thermal conductivity to transfer heat away from the cylinder head
- Conforms to and seals minor surface irregularities
- Can be trimmed if necessary for modified port applications
- For OE replacement, high performance street, drag race and oval track use
- Anti-Stick Properties
- Easy Removal For Disassembly
Victor Reinz – Exhaust Manifold Gasket Set (Part No.11-10270-01)
from
$25.99
As you would expect, extremely high temperatures are the sealing challenge for exhaust manifold gaskets. Victor Reinz has a long heritage of supplying manifold gaskets to original equipment vehicle manufacturers. Therefore, Victor Reinz exhaust manifold gaskets meet OE specifications on a wide range of vehicles, covering the most recent high-tech engine designs and going back decades to the muscle car era.
Product Features:
See More
Product Features:
- Choosing Victor Reinz assures getting OE quality parts in gaskets sets that have the coverage, contents, packaging and electronic cataloging to best meet the needs of the aftermarket.
Flowtech – Exhaust Manifold/Header Hardware (Part No.99150FLT)
from
$95.99
Exhaust Manifold/Header Hardware
Mr. Gasket – Ultra Seal: Exhaust Gasket Set (Part No.5913)
from
$44.49
Manufactured from high-temperature steel core/graphite faced exhaust material. Expanded steel core provides stability and maximum torque retention to eliminate gasket failure. Graphite facing provides excellent heat resistance and thermal conductivity to transfer heat away from the cylinder head. Conforms to and seals minor surface irregularities. High recovery material allows header or manifold flange to stay sealed if flange loses clamp-load. Can be trimmed if necessary for modified port applications. For original equipment replacement, high performance street, drag race and oval track use.
Product Features:
See More
Product Features:
- Manufactured from high-temperature steel core/graphite faced exhaust material
- Expanded steel core provides stability and maximum torque retention to eliminate gasket failure
- Graphite impregnated facing provides excellent heat resistance and thermal conductivity to transfer heat away from the cylinder head
- Conforms to and seals minor surface irregularities
- Can be trimmed if necessary for modified port applications
- For OE replacement, high performance street, drag race and oval track use
- Anti-Stick Properties
- Easy Removal For Disassembly
Flowmaster Inc. – Super 44 Series Muffler, 2.5in Offset Inlet 2.5in Center Outlet, Non-Reversible, Aggressive Sound (Part No.842546)
from
$139.99
Flowmaster’s Super 44 muffler uses the same Delta Flow technology found in our larger Super 40 mufflers. The Super 44 delivers a rich powerful tone and are the most aggressive, highest performing street muffler we’ve ever built in a four inch case. Constructed of 16 gauge 409S stainless steel and fully MIG welded for maximum durability.
See More
Flowmaster Inc. – 40 Series Muffler, 2.5in Offset Inlet 2.5in Center Outlet, Non-Reversible, Aggressive Sound (Part No.42541)
from
$101.99
The Original 40 series muffler delivers an aggressive exterior and interior tone. If you’re looking for that original Flowmaster sound this is the muffler is for you. Constructed of 16 gauge aluminized steel and fully MIG welded for maximum durability.
See More
Flowmaster Inc. – 80 Series Muffler, 2.5in Offset Inlet 2.5in Same Side Out Outlet, Non-Reversible, Aggressive Sound (Part No.52580)
from
$231.99
The 80 series is a cross-flow design for applications where the muffler is mounted transversely behind the rear end. Delivering an aggressive muscle car sound both inside and outside the vehicle, this is an excellent replacement for Camaros & Firebirds with transverse mufflers. Constructed of 16 gauge aluminized steel and fully MIG welded for maximum durability.
See More
Walker – Quiet-Flow SS Direct Fit Exhaust Muffler 2.25" Inlet (ID) 2.25" Outlet (OD) (Part No.22324)
from
$177.99
Product Features:
See More
- CORROSION RESISTANT STAINLESS STEEL – The only broad-market muffler body with 100% stainless-steel construction that delivers longer life versus aluminized mufflers while an internal drainage system reduces moisture collection
- EASY TO INSTALL – Direct-fit bolt-on replacement solution with OE-style hangers, brackets and pipe routings for easy installation and doesn’t require specialized fabrication and welding
- BUILT TO LAST – Internal partitions and mechanically joined tubes allow expansion and contraction during temperature changes to minimize distortion while spun-locked heads and OE-style spot welds provide stability and longer service life
- PREMIUM ACOUSTIC CONTROL – OE-style louvered tubes lower noise levels while OE-style domed heads help reduce radiated noise for premium factory-style sound quality compared to straight perforated tubes
- DESIGN VALIDATED – Acoustic and flow tested for quality OE-style sound you can count on
- BUY WITH CONFIDENCE – Comes with Walker’s limited warranty and exclusive 90-Day Safe and Sound Guarantee. Visit Walkerexhaust.com for details.
Walker – Exhaust Clamp (Part No.35337)
from
$8.99
Complete your exhaust repair with an Exhaust Mate U-bolt clamp. Designed to ensure a tight, leak-resistant connection, Exhaust Mate hardware is manufactured from durable and robust material for long service life.
Product Features:
See More
Product Features:
- CONNECTS EXHAUST PARTS – Provides secure, leak-resistant connection
- AVAILABLE IN DIFFERENT SIZES – Offered in a variety of styles and sizes for a quality vehicle repair
- PREMIUM MATERIALS – Made from quality material for durability and long life
- BETTER TOGETHER – Use Walker accessories when installing catalytic converters and mufflers for a complete exhaust system upgrade
Walker – Exhaust Clamp (Part No.35336)
from
$2.99
Complete your exhaust repair with an Exhaust Mate U-bolt clamp. Designed to ensure a tight, leak-resistant connection, Exhaust Mate hardware is manufactured from durable and robust material for long service life.
Product Features:
See More
Product Features:
- CONNECTS EXHAUST PARTS – Provides secure, leak-resistant connection
- AVAILABLE IN DIFFERENT SIZES – Offered in a variety of styles and sizes for a quality vehicle repair
- PREMIUM MATERIALS – Made from quality material for durability and long life
- BETTER TOGETHER – Use Walker accessories when installing catalytic converters and mufflers for a complete exhaust system upgrade
Upgrade your 1985 Chevrolet Corvette with Top-Quality Exhaust Parts
When it comes to maintaining or upgrading your 1985 Chevrolet Corvette, nothing is more important than using high-quality OEM or aftermarket parts that you can trust. Whether you’re repairing damage to your Chevrolet or enhancing its overall performance, Exhaust Parts are key to keeping your Corvette functioning at its best. At Advance Auto Parts, we offer a wide selection of 35 Exhaust Parts for the 1985 Chevrolet Corvette, designed to meet your needs without breaking the bank.
From
Exhaust Muffler
replacements to
Exhaust Pipes
upgrades, we’ve got you covered with parts that fit your vehicle perfectly and ensure long-lasting performance.
Affordable Prices and Wide Selection
Shopping for Exhaust Parts for any vehicle can be a hassle, especially if you’re on a budget. But with Advance Auto Parts, you can find high-quality Exhaust Parts for your 1985 Chevrolet Corvette at great prices.
Our Exhaust Parts inventory for this model
ranges from just $2.99 to $716.99, with
an average price of $101.43.
Our 35 Exhaust Parts in stock come from 9 trusted brands, so you’re sure to find the right part for your 1985 Chevrolet Corvette without overspending.
Top Brands and High Customer Satisfaction
Advance Auto Parts takes pride in offering only the best brands in the automotive industry. For your 1985 Chevrolet Corvette, we stock popular OEM and aftermarket Exhaust Parts from top names
like Walker Taylor Gaskets, and more.
Walker Exhaust Parts
start at just $87.99 and boast an impressive 4.2 stars average rating from customers.
With 32 customer reviews and counting, our 1985 Chevrolet Corvette Exhaust Parts have a strong track record of reliability, ensuring you can trust your purchase.
Explore Related Parts and More
While you’re here, don’t forget to check out other essential categories that go hand in hand with Exhaust Part upgrades. Explore related part types like Batteries and Chargers, Oil and Lubricants
and more to make sure your 1985 Chevrolet Corvette is always ready to roll. We’re committed to providing you with everything you need to keep your Corvette in top shape, all in one place.
Start shopping confidently below for your 1985 Chevrolet Corvette!
Best-Selling Exhaust Mufflers for 1985 Chevrolet Corvettes
Enhance the driving experience in your Chevrolet with 2 quality Exhaust Muffler components, starting at $142.99.
Walker – Quiet-Flow SS Direct Fit Exhaust Muffler 2.25" Inlet (ID) 2.25" Outlet (OD) (Part No.22397)
from
$142.99
Product Features:
See More
- CORROSION RESISTANT STAINLESS STEEL – The only broad-market muffler body with 100% stainless-steel construction that delivers longer life versus aluminized mufflers while an internal drainage system reduces moisture collection
- EASY TO INSTALL – Direct-fit bolt-on replacement solution with OE-style hangers, brackets and pipe routings for easy installation and doesn’t require specialized fabrication and welding
- BUILT TO LAST – Internal partitions and mechanically joined tubes allow expansion and contraction during temperature changes to minimize distortion while spun-locked heads and OE-style spot welds provide stability and longer service life
- PREMIUM ACOUSTIC CONTROL – OE-style louvered tubes lower noise levels while OE-style domed heads help reduce radiated noise for premium factory-style sound quality compared to straight perforated tubes
- DESIGN VALIDATED – Acoustic and flow tested for quality OE-style sound you can count on
- BUY WITH CONFIDENCE – Comes with Walker’s limited warranty and exclusive 90-Day Safe and Sound Guarantee. Visit Walkerexhaust.com for details.
Walker – Quiet-Flow SS Direct Fit Exhaust Muffler 2.25" Inlet (ID) 2.25" Outlet (OD) (Part No.22396)
from
$159.99
Product Features:
See More
- CORROSION RESISTANT STAINLESS STEEL – The only broad-market muffler body with 100% stainless-steel construction that delivers longer life versus aluminized mufflers while an internal drainage system reduces moisture collection
- EASY TO INSTALL – Direct-fit bolt-on replacement solution with OE-style hangers, brackets and pipe routings for easy installation and doesn’t require specialized fabrication and welding
- BUILT TO LAST – Internal partitions and mechanically joined tubes allow expansion and contraction during temperature changes to minimize distortion while spun-locked heads and OE-style spot welds provide stability and longer service life
- PREMIUM ACOUSTIC CONTROL – OE-style louvered tubes lower noise levels while OE-style domed heads help reduce radiated noise for premium factory-style sound quality compared to straight perforated tubes
- DESIGN VALIDATED – Acoustic and flow tested for quality OE-style sound you can count on
- BUY WITH CONFIDENCE – Comes with Walker’s limited warranty and exclusive 90-Day Safe and Sound Guarantee. Visit Walkerexhaust.com for details.
Most Popular 1985 Chevrolet Corvette Exhaust Pipes
Customize your Chevrolet with 1 Exhaust Pipes products
like Exhaust Pipes, all
priced under $84.99.
Flowtech – HEADER FLT BLOCK HUGGER (Part No.10010FLT)
from
$84.99
HEADER FLT BLOCK HUGGER
Top Picks for 1985 Chevrolet Corvette Exhaust Hangers
Upgrade Chevrolet Corvettes with top-quality Exhaust Hangers parts, including 1 OEM and aftermarket selections for your 1985 model.
Walker – Exhaust System Hanger (Part No.35248)
from
$27.49
Complete your exhaust repair with Walker exhaust hangers. Designed with OE-style features to support undercar exhaust components, Walker hangers are manufactured from durable and robust material for long service life.
Product Features:
See More
Product Features:
- KEEPS EXHAUST PARTS IN PLACE – Designed to support undercar exhaust components
- OE DESIGN – Designed with OE-style features for easy installation
- AVAILABLE IN DIFFERENT SIZES – Offered in a variety of styles and sizes for a quality vehicle repair
- PREMIUM MATERIALS – Made from quality steel for durability and long life
- BETTER TOGETHER – Use premium Walker accessories when installing Walker catalytic converters and mufflers for a complete exhaust system upgrade
In-Demand Exhaust Manifold and Headers for 1985 Chevrolet Corvettes
Select from 10 premium Exhaust Manifold and Headers parts for your 1985 Chevrolet Corvette, with prices ranging from $31.99 to $716.99.
Walker – Catalytic Converter Air Tube (Part No.35574)
from
$87.99
Complete your exhaust repair with a Walker air intake tubing. Designed to work seamlessly with OE and Walker rubber intake parts, Walker hardware is manufactured from durable and robust material for long service life.
Product Features:
See More
Product Features:
- CUSTOMIZABLE FIT – Universal fit for installation flexibility
- COMPATIBILITY – Features OD-OD sized ends designed to work seamlessly with OE and Walker rubber intake parts
- QUALITY MATERIALS – Made from aluminum for durability and long life
- Designed to work seamlessly with OE and Walker aftermarket replacement parts
- New Walker accessories help to ensure effective exhaust repairs
ARP Auto Racing – For Use With Chevy Small Block, 3/8"-16, 1"L, Hex Head, Natural, Ss, Set Of 12 (Part No.400-1111)
from
$51.99
ARP manufactures a variety of premium grade bolt and stud kits to facilitate installation of exhaust headers including the popular stainless stud kit with 12 point nuts. The Stainless 300 material is not affected by corrosion or extreme heat, making it ideal for the application.
Product Features:
See More
Product Features:
- Material Is Not Affected By Corrosion Or Extreme Heat
- The Compact 12-Point Nut Lets You Easily Slip A Socket Close To The Pipe
- Substantially Stronger Than Grade 8 Hardware
- Nominally Rated At 170,000 Psi Tensile Strength
- 3/8″-16 Thread Size
- 1″ Underhead Length
ARP Auto Racing – For Use With Chevy Small Block, 3/8 – 16" Thread Size, .75" L, Natural, Set Of 12 (Part No.400-1201)
from
$33.99
ARP manufactures a variety of premium grade bolt and stud kits to facilitate installation of exhaust headers including the popular stainless stud kit with 12 point nuts. The Stainless 300 material is not affected by corrosion or extreme heat, making it ideal for the application.
Product Features:
See More
Product Features:
- Material Is Not Affected By Corrosion Or Extreme Heat
- The Compact 12-Point Nut Lets You Easily Slip A Socket Close To The Pipe
- Substantially Stronger Than Grade 8 Hardware
- Nominally Rated At 170,000 Psi Tensile Strength
- 3/8″-16 Thread Size
- 1″ Underhead Length
ARP Auto Racing – 0.750" L, Hex Style Head Type, Black Oxide, Black, Chrome Moly, Set Of 12 (Part No.100-1101)
from
$31.99
ARP manufactures a variety of premium grade bolt and stud kits to facilitate installation of exhaust headers including the popular stainless stud kit with 12 point nuts. The Stainless 300 material is not affected by corrosion or extreme heat, making it ideal for the application.
Product Features:
See More
Product Features:
- Material Is Not Affected By Corrosion Or Extreme Heat
- The Compact 12-Point Nut Lets You Easily Slip A Socket Close To The Pipe
- Substantially Stronger Than Grade 8 Hardware
- Nominally Rated At 170,000 Psi Tensile Strength
- Set of 12
- 0.75″ Overall Length
Hooker Headers – ExhstHdr (Part No.2301HKR)
from
$716.99
ExhstHdr
Flowtech – Shty/Block Hugger Hd (Part No.11546FLT)
from
$292.99
Shty/Block Hugger Hd
Flowtech – Shty/Block Hugger Hd (Part No.11545FLT)
from
$268.99
Shty/Block Hugger Hd
Taylor Gaskets – Vibe Lock Header Bolt Kit (Part No.310004)
from
$89.99
Vibe Lock Header Bolt Kit
Taylor Gaskets – Vibe-Lock Bolt (Part No.310016)
from
$89.99
Vibe-Lock Bolt
ARP Auto Racing – For Use With Chevy Small Block, 3/8"-16, 0.75"L, Hex Head, Natural Ss, Set Of 12 (Part No.400-1101)
from
$33.99
ARP manufactures a variety of premium grade bolt and stud kits to facilitate installation of exhaust headers including the popular stainless stud kit with 12 point nuts. The Stainless 300 material is not affected by corrosion or extreme heat, making it ideal for the application.
Product Features:
See More
Product Features:
- Material Is Not Affected By Corrosion Or Extreme Heat
- The Compact 12 Point Nut Lets You Easily Slip A Socket Close To The Pipe
- Substantially Stronger Than Grade 8 Hardware
- Nominally Rated At 170,000 PSI Tensile Strength
- 0.75″ Underhead Length
- Set of 12
Most Sold 1985 Chevrolet Corvette Exhaust Fittings
Explore our best-selling Chevrolet parts for the 1985 Corvette among 1 OEM and aftermarket options starting from $2.99.
Walker – Exhaust Clamp (Part No.35336)
from
$2.99
Complete your exhaust repair with an Exhaust Mate U-bolt clamp. Designed to ensure a tight, leak-resistant connection, Exhaust Mate hardware is manufactured from durable and robust material for long service life.
Product Features:
See More
Product Features:
- CONNECTS EXHAUST PARTS – Provides secure, leak-resistant connection
- AVAILABLE IN DIFFERENT SIZES – Offered in a variety of styles and sizes for a quality vehicle repair
- PREMIUM MATERIALS – Made from quality material for durability and long life
- BETTER TOGETHER – Use Walker accessories when installing catalytic converters and mufflers for a complete exhaust system upgrade
Top-Rated Exhaust Parts Brands For Your 1985 Chevrolet Corvette
Shop for the best-rated brands offering Exhaust Parts and other products for your 1985 Chevrolet Corvettes. Below you’ll find some of our best rated Exhaust Parts from Walker and Taylor Gaskets, and more. Exhaust Parts from these brands that fit a 1985 Corvette start at just $48.99 and are rated as high as 4.2 stars. OEM and aftermarket Exhaust Parts don’t get more top quality, durable, and affordable than from the brands below.
Popular Walker 1985 Chevrolet Corvette Exhaust Parts
When it comes to maintaining or upgrading your 1985 Chevrolet Corvette, using quality Exhaust Parts is essential to ensure durability and a perfect fit. Walker ticks all of those boxes. We offer a wide selection of Walker Exhaust Parts, specifically designed for the 1985 Chevrolet Corvette. With over 1 Walker brand Exhaust Parts in stock, you’re sure to find what you need. The prices for these top-notch parts start as low as $87.99. Plus, with over 1 customer reviews and an average rating of 4.2 stars, you can trust that our Walker Exhaust Parts will get the job done right. Choose Advance Auto Parts for reliability, quality, and expert-approved parts that keep your vehicle running strong.
Popular Taylor Gaskets 1985 Chevrolet Corvette Exhaust Parts
Taylor Gaskets auto parts is one of the highest quality Exhaust Part brands in the market. Any 1985 Chevrolet Corvette owner should feel confident when installing genuine Taylor Gaskets parts in their vehicle. To ensure the best fit and performance for your 1985 Corvette, Advance Auto Parts carries a full inventory of 1 Taylor Gaskets Exhaust Parts. Plus you will be keeping your Chevrolet in peak condition while saving money because prices on these Taylor Gaskets Exhaust Parts range up to $48.99, plus, with more than 1 customer reviews and an impressive 4.2 stars average rating, you can be confident the Fram Exhaust Parts below will deliver on both quality and value.
FAQs for 1985 Chevrolet Corvette Exhaust Parts
Which Exhaust Parts are best-sellers for 1985 Chevrolet Corvettes?
Out of 35 Exhaust Parts that fit 1985 Chevrolet Corvettes, the following parts are the top sellers:
- Exhaust Manifold Gasket Set (3218708) – $26.99
- Aluminum Exhaust Gasket: High-Heat Resistant, Easy Removal (6900014) – $47.99
- Super Competition Header Gasket (22311317) – $26.49
What’s the price range for 1985 Chevrolet Corvette Exhaust Parts?
Exhaust Part prices for the 1985 Chevrolet Corvette start at $2.99 and go up to $716.99 for the most premium parts.
What’s the average price of a Exhaust Part for a 1985 Chevrolet Corvette?
The average price for Exhaust Parts for the 1985 Chevrolet Corvette is $101.43. Keep in mind the variety of part types within our Exhaust Part category so you are likely to find a wide range of prices across a variety of parts and components.
Does Advance Auto Parts sell Exhaust Parts for other Chevrolet Corvette model years?
What are the cheapest Exhaust Parts for my 1985 Chevrolet Corvette?
The cheapest 1985 Chevrolet Corvette Exhaust Parts we carry in stock are:
- Exhaust Clamp (11012137) – $2.99
- Exhaust Pipe Flange Gasket (18371081) – $5.99
- Performance Exhaust Gasket Set for Enhanced Sealing and Durability (5020441) – $24.79
- Super Competition Header Gasket (22311317) – $26.49
- Exhaust Manifold Gasket Set (3218708) – $26.99
What are the top-rated Exhaust Parts that fit the 1985 Chevrolet Corvette?
Out of 32 reviews by customers, our 1985 Chevrolet Corvette Exhaust Parts have an average customer rating of . These are some of the highest-rated Exhaust Part types for the 1985 Chevrolet Corvette and their top-rated products:
- Exhaust Tips
- Terminator; Exhaust Tips (19310030) – $93.99
- Exhaust Gaskets
- Terminator; Exhaust Tips (19310030) – $93.99
What types of Exhaust Parts do you sell for my 1985 Chevrolet Corvette?
As of 3/1/26, these are some of the most in-demand types of Exhaust Parts for a 1985 Chevrolet Corvette:
Can I get help with 1985 Chevrolet Corvette Exhaust Part orders?
Contact our customer support team, by chat or phone, through the help desk page, where you can find instant answers about Chevrolet Exhaust Parts and more.
What is your return policy for Chevrolet Corvette Exhaust Parts?
Advance Auto Parts keeps returns simple. For new Chevrolet Corvette Exhaust Parts and accessories, your online orders can be returned, in their original condition, within 45 days. For requirements, see the returns page.
