2018 Chevrolet Corvette Exhaust Parts
Find Your Specific 2018 Chevrolet Corvette Exhaust Parts
Below you will find various in-demand Chevrolet Exhaust Parts, components and accessories for your 2018 Corvette. Advance Auto Parts has popular Corvette parts like Exhaust Gaskets, Catalytic Converters, Exhaust Pipes and more. You’ll also find aftermarket and OEM Exhaust Parts for other Corvette model years including
2013,
2014,
2015,
2016,
2017,
2019,
2020,
2021,
2022 and more. Select a category of 2018 Chevrolet Corvette Exhaust Parts below and start saving instantly.
Popular 2018 Chevrolet Corvette Exhaust Parts Categories
Essential Exhaust Parts for 2018 Chevrolet Corvettes
Walker – Exhaust Pipe Flange Gasket (Part No.31537)
from
$7.29
Complete your exhaust repair with Walker gaskets and flanges. Available in a variety of styles and sizes, they¿re designed to work with OE exhaust components and Walker aftermarket replacement parts.
Product Features:
See More
Product Features:
- AVAILABLE IN DIFFERENT SIZES — Offered in a variety of styles and sizes for a quality vehicle repair
- HEAT RESISTANT — Designed to resist heat for long-lasting performance
- PREMIUM MATERIALS — Made from high-quality materials for durability and long life
- ENGINEERING EXPERTISE — Parts are reviewed and validated and approved by Walker engineers through rigorous research and development
- REAL-WORLD TESTED — Parts are tested on-vehicle and validated to ensure optimal performance on the road
- EASIER TO INSTALL — Featuring slotted bolt holes (where applicable) for easy installation, gasket slips into place
- BETTER TOGETHER — Use premium Walker accessories when installing Walker catalytic converters and mufflers for a complete exhaust system upgrade
Felpro – Exhaust Pipe Flange Gasket (Part No.9587)
from
$2.99
Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust
Product Features:
See More
Product Features:
- Meets or exceeds all original equipment specifications
- Application specific design to ensure a perfect fit
- Engineered for the sealing repair environment
- Unsurpassed quality you can trust
- Validated for fit, form, and function
Felpro – Exhaust Pipe Flange Gasket (Part No.60985)
from
$5.29
Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust
Product Features:
See More
Product Features:
- Meets or exceeds all original equipment specifications
- Application specific design to ensure a perfect fit
- Engineered for the sealing repair environment
- Unsurpassed quality you can trust
- Validated for fit, form, and function
Felpro – Exhaust Pipe Flange Gasket (Part No.8194)
from
$2.99
Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust
Product Features:
See More
Product Features:
- Meets or exceeds all original equipment specifications
- Application specific design to ensure a perfect fit
- Engineered for the sealing repair environment
- Unsurpassed quality you can trust
- Validated for fit, form, and function
Borla Performance Exhaust – T-304 Ss, 2.75"Pipe Diameter, Without Catalytic Converters, X-Pipe (Part No.60548)
from
$403.99
Borla (R) X-Pipe works perfectly between the factory catalytic converters and Borla (R) Axle-Back systems. This performance X-Pipe creates power while adding a great sound. With adapters it can be used with headers. Built from premium T-304 austenitic stainless steel, superior to T-400 series (such as 409), to give you the absolute best in performance and durability .Ultra-smooth mandrel bends ensure maximum flow and power, and precision computer numerical control (CNC) manufacturing ensures an accurate fit.
Product Features:
See More
Product Features:
- Built From Premium T-304 Stainless Steel, Superior To T-400 Series (Such As 409), To Give You The Absolute Best In Performance And Durability
- X-Pipes Unleash Horsepower And Create A Custom Sound
- Ultra-Smooth Mandrel Bends Ensure Maximum Flow And Power
- Precision Computer-Controlled CNC Manufacturing Ensures An Accurate Fit
Borla Performance Exhaust – T-304 Stainless Steel, 2-1/2 Inch Diameter, Without Converters, X-Pipe (Part No.60087)
from
$462.99
This performance X-Pipe creates power while adding a great sound systems. In testing, customers and racers alike noticed the power increase you’ve come to expect from Borla (R), and all commented on the great exhaust tone being emitted. This sophisticated component is a perfect compliment to the famous Borla (R) Cat-Back (TM) systems and is even lighter than the stock system, mainly due to the premium, high-quality T-304 austenitic lightweight stainless steel used in every Borla (R) exhaust component. Additional attributes include an extremely simple, bolt-in replacement for the factory mid-pipe that further enhances that famous Borla (R) growl of power. Ultra-smooth mandrel bends ensure maximum flow and power, and precision computer numerical control (CNC) manufacturing ensures an accurate fit. While many exhaust companies talk about racing, Borla (R) mufflers, headers and other exhaust components are tested every single weekend on race tracks around the world. The Borla (R) success is unmatched, and that effort transfers to the Borla (R) street systems.
Product Features:
See More
Product Features:
- Premium, High-Quality T-304 Austenitic Lightweight Stainless Steel Used In Exhaust Component
- This Performance X-Pipe And Connection Pipes Create Power While Adding A Great Sound
- Lighter Than The Stock System
- Great Exhaust Tone Being Emitted
ARP Auto Racing – For Use With Chevy Small Block, 3/8"-16, 0.75"L, Hex Head, Natural Ss, Set Of 12 (Part No.400-1101)
from
$26.99
ARP manufactures a variety of premium grade bolt and stud kits to facilitate installation of exhaust headers including the popular stainless stud kit with 12 point nuts. The Stainless 300 material is not affected by corrosion or extreme heat, making it ideal for the application.
Product Features:
See More
Product Features:
- Material Is Not Affected By Corrosion Or Extreme Heat
- The Compact 12 Point Nut Lets You Easily Slip A Socket Close To The Pipe
- Substantially Stronger Than Grade 8 Hardware
- Nominally Rated At 170,000 PSI Tensile Strength
- 0.75″ Underhead Length
- Set of 12
ARP Auto Racing – For Use With Chevy Small Block, Black Oxide, Black, Chrome Moly, Set Of 12 (Part No.100-1201)
from
$19.99
ARP manufactures a variety of premium grade bolt and stud kits to facilitate installation of exhaust headers including the popular stainless stud kit with 12 point nuts. The Stainless 300 material is not affected by corrosion or extreme heat, making it ideal for the application.
Product Features:
See More
Product Features:
- Material Is Not Affected By Corrosion Or Extreme Heat
- The Compact 12 Point Nut Lets You Easily Slip A Socket Close To The Pipe
- Substantially Stronger Than Grade 8 Hardware
- Nominally Rated At 170,000 PSI Tensile Strength
- Set of 12
- 0.75″ Overall Length
Mr. Gasket – Exhsthdrbolt (Part No.2230G)
from
$47.99
Headlock&trade: Bolts eliminate the need for lock washers, Period. That’s because each Headlock&trade: Bolt features 24 equally-spaced, stainless steel teeth serrations that bite into and hold onto the attaching surface-eliminating the need for lock-washers.
Product Features:
See More
Product Features:
- 12 per Package
- Includes a ball-head/hex-key socket-installation tool that makes it easy to get them started
- 410 stainless steel
- Minimum 180,000 PSI tensile strength
- 24 equally spaced clockwise teeth
Mr. Gasket – Header Bolt Set (Part No.2210G)
from
$41.99
Made of high quality stainless steel. These bolts will brighten up your hot rod, or improve the looks of your race car.
Product Features:
See More
Product Features:
- Bright Ball Burnish Finish
- Made From 304 Stainless
- Compact Hex Head Is Ideal Where Space Is Limited
- 12 Per Set
- Resist corrosion and provides a clean professional appearance
Walker – Catalytic Converter- EPA Standard, Direct Replacement, No Fabrication Needed (Part No.15622)
from
$385.99
Designed to provide the required reduction in tailpipe emissions and meet EPA emissions requirements with assured compliance, Walker Standard direct-fit catalytic converters are available for pre-OBD (1995 and older) vehicles.
Product Features:
See More
Product Features:
- EPA COMPLIANT — For use on pre-OBDII vehicles, 1995 and older. Not legal for sale or use in CA, CO and NY. Legal in ME on all pre-OBD vehicles only. Consult your state’s aftermarket converter regulations for details.
- DIRECT-FIT DESIGN — Direct-fit bolt-on replacement solution with OE-style hangers, brackets, routings and heat shields for easy installation that doesn’t require specialized fabrication and/or welding
- STRONG AND DURABLE — Features thick OE-style flanges, hangers and brackets for strength and durability
- OE-STYLE DESIGN — Features aluminized heat shields when originally equipped, to match OE design, protecting the undercarriage from heat created by the converter
MagnaFlow – California Grade CARB Compliant Universal Catalytic Converter (Part No.408006)
from
$279.99
MagnaFlow California Grade CARB Compliant Universal Catalytic Converter 408006 helps keep the check engine light off. Get the right fit for a wide array of vehicles thanks to the adaptable Universal design (cutting and welding is required). With highly corrosion resistant, stainless steel construction, you can have confidence in the quality of this catalytic converter. This replacement part is designed to meet or exceed California Air Resource Board requirements, and has undergone additional testing to comply with CARB guidelines to allow for legal use in California and CARB restricted states, for the listed vehicles.
Product Features:
See More
Product Features:
- Expertly formulated catalyst blend maximizes efficiency, ensuring optimal emissions control to keep your check engine light off.
- Compact, lightweight construction enables installation in confined areas, welding is required.
- Your trusted source for CARB-compliant catalytic converters, providing assurance of genuine compliance while delivering quality that will last.
Walker – CalCat CARB Universal Catalytic Converter 2.25" Inlet (ID) 2.25" Outlet (ID) (Part No.81111)
from
$549.99
Designed, tested and validated for assured compliance to meet CARB standards, Walker CalCat Universal Catalytic Converters are available for OBDII (1996 and newer) and non-OBD (1995 and older) vehicles.
Product Features:
See More
Product Features:
- CARB COMPLIANT — For use on OBDII vehicles, 1996 and newer and non-OBD 1995 and older. Legal for sale in CA, CO, NY & other states requiring CARB-compliant replacement converters. Consult your state¿s aftermarket converter regulations.
- CARB COMPLIANT — For use on OBDII vehicles, 1996 and newer and non-OBD 1995 and older. Legal for sale in CA, CO, NY & other states requiring CARB-compliant replacement converters. Consult your state┐s aftermarket converter regulations.
- SUPERIOR TECHNOLOGY — Optimal high technology washcoat formulated to deliver superior performance (as compared to EPA-compliant converters)
- CONSISTENT PERFORMANCE — Utilizes a precise OE-style coating process to apply catalyst material to the substrate, providing consistent performance for assured emissions compliance
- DURABLE — Features stainless-steel body with aluminized pipe and heat shields for durability
- FLEXIBLE SOLUTION — Customizable design features expandable bushings for easy fitment and may require specialized fabrication and/or welding for installation
MagnaFlow – HM Grade Federal / EPA Compliant Direct-Fit Catalytic Converter (Part No.93999)
from
$523.99
Keep the check engine light off with MagnaFlow HM Grade Federal/EPA Compliant Direct-Fit Catalytic Converter 93999. With features including free-flowing mandrel-bent tubing and highly corrosion resistant stainless steel construction, easily install this spun body converter yourself using the proper tools, no cutting or welding required. MagnaFlow’s state-of-the-art metrology department uses the latest 3D scanning systems during research and development, so you can be confident that your new part will fit and function like the original equipment. By replicating the OE spun body design, the single laser fusion weld greatly reduces the possibility of a leak, and our compact, low-mass design also allows for greater thermal efficiency. This direct-fit catalytic converter is designed specifically for the 2005-2011 Chevrolet Corvette. Avoid potential exhaust leaks by using the included gaskets to get a proper seal. This replacement part is designed to meet or exceed Federal emissions requirements set forth by the EPA, complying with legal standards for OBDII Federally registered vehicles with Federal/EPA Emission systems.
Product Features:
See More
Product Features:
- Expertly crafted to replicate OEM-like flow dynamics, maintaining factory performance and fuel efficiency.
- Simplifies installation with essential gaskets and hardware being included in the box.
- Your trusted source for EPA-compliant catalytic converters, providing assurance of genuine compliance while delivering quality that will last.
Mr. Gasket – Mls Exhaust Gasket (Part No.4805G)
from
$49.49
Multi-Layered Steel (MLS) exhaust and header collector gaskets are designed for extreme cylinder pressures produced by high horsepower high compression turbo-charged, supercharged and nitrous oxide injected engines. Manufactured from three stainless steel layers, they resist corrosion, will not burn through or push out and maintain maximum fastener torque retention. Stress formed inner and outer layer embossments act like springs that rebound under exhaust flange clamp load, creating force to seal extreme exhaust pressures. Total gasket thickness .075 inch. Will not deteriorate from scrubbing action caused by different expansion rates in aluminum and steel materials.
Product Features:
See More
Product Features:
- Multi Layer Stainless Steel 3-Layers
- Round Port 1.75″ Diameter
- Will not deteriorate from scrubbing action caused by different expansion rates in aluminum and steel materials.
- Thickness .072″
- Fits GM LS Series Engines 1997-’15
Victor Reinz – Exhaust Manifold Gasket Set (Part No.11-10413-01)
from
$24.49
As you would expect, extremely high temperatures are the sealing challenge for exhaust manifold gaskets. Victor Reinz has a long heritage of supplying manifold gaskets to original equipment vehicle manufacturers. Therefore, Victor Reinz exhaust manifold gaskets meet OE specifications on a wide range of vehicles, covering the most recent high-tech engine designs and going back decades to the muscle car era.
Product Features:
See More
Product Features:
- Choosing Victor Reinz assures getting OE quality parts in gaskets sets that have the coverage, contents, packaging and electronic cataloging to best meet the needs of the aftermarket.
Mr. Gasket – Ultra Seal: Exhaust Gasket Set (Part No.5907)
from
$31.99
Manufactured from high-temperature steel core/graphite faced exhaust material. Expanded steel core provides stability and maximum torque retention to eliminate gasket failure. Graphite facing provides excellent heat resistance and thermal conductivity to transfer heat away from the cylinder head. Conforms to and seals minor surface irregularities. High recovery material allows header or manifold flange to stay sealed if flange loses clamp-load. Can be trimmed if necessary for modified port applications. For original equipment replacement, high performance street, drag race and oval track use.
Product Features:
See More
Product Features:
- Withstands Intense Exhaust Heat
- Graphite-Impregnated Facing
- Steel Expanded Metal Core
- Superior Tensile Strength
- Resists Deteriorating
- Anti-stick Properties
- Easy Removal For Disassembly
Mr. Gasket – Exhaust Gaskets – Standard Duty – Small Block Chevy Square Port, 1.45"W X 1.48"H – Reusable (Part No.150C)
from
$36.49
Mr. Gasket Performance exhaust gasket material is a heavy duty material, .062 inch thick, consisting of an acrylic binder system to resist high temperature. This material is made for sealing exhaust applications. Provides excellent sealing and durability.
Product Features:
See More
Product Features:
- Manufactured from high-temperature acrylic blend exhaust material
- Provides excellent sealing and durability
- Can be trimmed if necessary for modified port applications
- For OE replacement, high performance street, drag race and oval track use
Borla Performance Exhaust – Axle-Back Exhaust System – ATAK (Part No.11875)
from
$2587.99
Borla Performance Industries is the pioneer and leader in the design and manufacture of stainless steel performance exhaust. We began two decades ago as a manufacturer of exhaust systems for such “concours classics” as Rolls-Royce and Ferrari cars and have evolved into the premier manufacturer of today’s performance vehicles for the street, off-road, and racing.Borla is proud to offer a true “Made in the USA” product sold around the world. We are a company of motorheads, and it shows in our products, customer service, and culture. On weekends, the same Borla employees who built your exhaust or helped you with technical support can be found competing at tracks, drag strips, off-road events and car shows. Constructed using T-304 stainless steel for long life and sharp appearance, and features all welded construction for maximum durability. Unlike any other exhaust brand, Borla’systems are designed from scratch on a vehicle-by-vehicle basis. Every car or truck has unique mechanical and acoustical properties, all taken into account as we spend countless hours optimizing muffler body shapes, internal core configurations, flow dynamics,soundand more.
Product Features:
See More
Product Features:
- Increased exhaust velocity adds power, driving excitement, fuel economy, and the distinctive powerful sound
- Each system is built from premium, high-quality austenitic T-304 stainless steel
- Ultra-smooth mandrel bends ensure maximum flow & power, and precision computer-controlled CNC manufacturing ensures an accurate fit
Borla Performance Exhaust – Axle-Back Exhaust System – ATAK (Part No.11863CB)
from
$2299.99
Borla Performance Industries is the pioneer and leader in the design and manufacture of stainless steel performance exhaust. We began two decades ago as a manufacturer of exhaust systems for such “concours classics” as Rolls-Royce and Ferrari cars and have evolved into the premier manufacturer of today’s performance vehicles for the street, off-road, and racing.Borla is proud to offer a true “Made in the USA” product sold around the world. We are a company of motorheads, and it shows in our products, customer service, and culture. On weekends, the same Borla employees who built your exhaust or helped you with technical support can be found competing at tracks, drag strips, off-road events and car shows. Constructed using T-304 stainless steel for long life and sharp appearance, and features all welded construction for maximum durability. Unlike any other exhaust brand, Borla’systems are designed from scratch on a vehicle-by-vehicle basis. Every car or truck has unique mechanical and acoustical properties, all taken into account as we spend countless hours optimizing muffler body shapes, internal core configurations, flow dynamics,soundand more.
Product Features:
See More
Product Features:
- Increased exhaust velocity adds power, driving excitement, fuel economy, and the distinctive powerful sound
- Each system is built from premium, high-quality austenitic T-304 stainless steel
- Ultra-smooth mandrel bends ensure maximum flow & power, and precision computer-controlled CNC manufacturing ensures an accurate fit
Borla Performance Exhaust – 05-08 /Conv 6.0L/6.2L 8cyl 6spd RWD Touring SS Exhaust (Part No.11814)
from
$1618.99
Borla Performance Industries is the pioneer and leader in the design and manufacture of stainless steel performance exhaust. We began two decades ago as a manufacturer of exhaust systems for such “concours classics” as Rolls-Royce and Ferrari cars and have evolved into the premier manufacturer of today’s performance vehicles for the street, off-road, and racing.Borla is proud to offer a true “Made in the USA” product sold around the world. We are a company of motorheads, and it shows in our products, customer service, and culture. On weekends, the same Borla employees who built your exhaust or helped you with technical support can be found competing at tracks, drag strips, off-road events and car shows. Constructed using T-304 stainless steel for long life and sharp appearance, and features all welded construction for maximum durability. Unlike any other exhaust brand, Borla’systems are designed from scratch on a vehicle-by-vehicle basis. Every car or truck has unique mechanical and acoustical properties, all taken into account as we spend countless hours optimizing muffler body shapes, internal core configurations, flow dynamics,soundand more.
Product Features:
See More
Product Features:
- Increased exhaust velocity adds power, driving excitement, fuel economy, and the distinctive powerful sound
- Each system is built from premium, high-quality austenitic T-304 stainless steel
- Ultra-smooth mandrel bends ensure maximum flow & power, and precision computer-controlled CNC manufacturing ensures an accurate fit
MagnaFlow – Race Series Axle-Back Performance Exhaust System (Part No.15283)
from
$1240.00
The MagnaFlow 2009-2013 Chevrolet Corvette Race Series Axle-Back Performance Exhaust System 15283 doesn’t leave any performance on the table with a race-ready, light weight, dyno-proven design ready to help your 6.2L 2009-2013 Chevrolet Corvette take on any pretenders, whether on the track or the street. Exhaust kit 15283 is engineered to produce our powerful, resonant signature exhaust note at Very Aggressive exterior and Aggressive interior sound levels with an axle-back layout that replaces your vehicle’s exhaust components from near the rear axle on back. Please check to ensure compliance with local noise regulations. This Chevrolet Corvette exhaust kit features fast-flowing mandrel bent 2.5in. diameter main piping that ends in a Quad Center Rear exit with 4in. Polished Welded-On Double Wall Angle Cut Folded Edge tips. Extensive 3D scanning during development and the use of advanced CNC precision robotic manufacturing techniques ensures that 15283’s direct-fit design fits so perfectly that you can easily install the system yourself. The durable, corrosion resistant stainless steel construction of exhaust system 15283 is backed by MagnaFlow’s limited lifetime warranty.
Product Features:
See More
Product Features:
- High performance lightweight design
- Straight pipe-like sound
- Durable corrosion-resistant stainless steel construction
Borla Performance Exhaust – Axle-Back Exhaust System – ATAK (Part No.11881)
from
$1654.99
Borla Performance Industries is the pioneer and leader in the design and manufacture of stainless steel performance exhaust. We began two decades ago as a manufacturer of exhaust systems for such “concours classics” as Rolls-Royce and Ferrari cars and have evolved into the premier manufacturer of today’s performance vehicles for the street, off-road, and racing.Borla is proud to offer a true “Made in the USA” product sold around the world. We are a company of motorheads, and it shows in our products, customer service, and culture. On weekends, the same Borla employees who built your exhaust or helped you with technical support can be found competing at tracks, drag strips, off-road events and car shows. Constructed using T-304 stainless steel for long life and sharp appearance, and features all welded construction for maximum durability. Unlike any other exhaust brand, Borla’systems are designed from scratch on a vehicle-by-vehicle basis. Every car or truck has unique mechanical and acoustical properties, all taken into account as we spend countless hours optimizing muffler body shapes, internal core configurations, flow dynamics,soundand more.
Product Features:
See More
Product Features:
- Increased exhaust velocity adds power, driving excitement, fuel economy, and the distinctive powerful sound
- Each system is built from premium, high-quality austenitic T-304 stainless steel
- Ultra-smooth mandrel bends ensure maximum flow & power, and precision computer-controlled CNC manufacturing ensures an accurate fit
Felpro – EXHAUST MANIFOLD BOLT SET (Part No.ES 75120)
from
$24.99
Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust
Product Features:
See More
Product Features:
- Designed and manufactured to meet the needs of the exhaust system repair environment.
- Verified, tested and certified proprietary Organic coating resists corrosion.
- Tightly controlled coefficient of friction ensures reliable installation.
- Application specific kit contents
- Self-locking nuts (where applicable).
Dorman – Help – Exhaust Manifold Hardware Kit (Part No.03413)
from
$15.99
Our Exhaust Manifold Hardware Kit comes with the necessary installation components to assist you in replacing your manifold. Save time and energy by having the right hardware on hand when you need it.
Product Features:
See More
Product Features:
- Direct replacement – this exhaust manifold hardware kit matches the original hardware required to secure the exhaust manifold to the engine on specified vehicles.
- Ideal solution – this kit is a reliable replacement for the original hardware that is missing or damaged, or has failed
- Durable construction – this kit is made from quality components to ensure reliable performance and a long service life
- Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience
Upgrade your 2018 Chevrolet Corvette with Top-Quality Exhaust Parts
When it comes to maintaining or upgrading your 2018 Chevrolet Corvette, nothing is more important than using high-quality OEM or aftermarket parts that you can trust. Whether you’re repairing damage to your Chevrolet or enhancing its overall performance, Exhaust Parts are key to keeping your Corvette functioning at its best. At Advance Auto Parts, we offer a wide selection of 22 Exhaust Parts for the 2018 Chevrolet Corvette, designed to meet your needs without breaking the bank.
From
Exhaust Gasket
replacements to
Catalytic Converters
upgrades, we’ve got you covered with parts that fit your vehicle perfectly and ensure long-lasting performance.
Affordable Prices and Wide Selection
Shopping for Exhaust Parts for any vehicle can be a hassle, especially if you’re on a budget. But with Advance Auto Parts, you can find high-quality Exhaust Parts for your 2018 Chevrolet Corvette at great prices.
Our Exhaust Parts inventory for this model
ranges from just $15.99 to $2,924.99, with
an average price of $1,434.29.
Our 22 Exhaust Parts in stock come from 6 trusted brands, so you’re sure to find the right part for your 2018 Chevrolet Corvette without overspending.
Top Brands and High Customer Satisfaction
Advance Auto Parts takes pride in offering only the best brands in the automotive industry. For your 2018 Chevrolet Corvette, we stock popular OEM and aftermarket Exhaust Parts from top names
like Dorman, and more.
Dorman Exhaust Parts
start at just $15.99 and boast an impressive 4 stars average rating from customers.
With 111 customer reviews and counting, our 2018 Chevrolet Corvette Exhaust Parts have a strong track record of reliability, ensuring you can trust your purchase.
Explore Related Parts and More
While you’re here, don’t forget to check out other essential categories that go hand in hand with Exhaust Part upgrades. Explore related part types like Batteries and Chargers, Oil and Lubricants
and more to make sure your 2018 Chevrolet Corvette is always ready to roll. We’re committed to providing you with everything you need to keep your Corvette in top shape, all in one place.
Start shopping confidently below for your 2018 Chevrolet Corvette!
Best-Selling Exhaust Gaskets for 2018 Chevrolet Corvettes
Enhance the driving experience in your Chevrolet with 1 quality Exhaust Gasket components, starting at $25.99.
Felpro – Exhaust Manifold Gasket Set (Part No.MS 97405)
from
$25.99
Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust
Product Features:
See More
Product Features:
- Meets or exceeds all original equipment specifications
- Application specific design to ensure a perfect fit
- Engineered for the sealing repair environment
- Unsurpassed quality you can trust
- Validated for fit, form, and function
Most Popular 2018 Chevrolet Corvette Catalytic Converters
Customize your Chevrolet with 1 Catalytic Converters products
like Catalytic Converters, all
priced under $2,576.99.
MagnaFlow – OEM Grade Federal / EPA Compliant Direct-Fit Catalytic Converter (Part No.21-973)
from
$2576.99
Keep the check engine light off with MagnaFlow OEM Grade Federal/EPA Compliant Direct-Fit Catalytic Converter 21-973. With features including free-flowing mandrel-bent tubing and highly corrosion resistant stainless steel construction, easily install this spun body converter yourself using the proper tools, no cutting or welding required. MagnaFlow’s state-of-the-art metrology department uses the latest 3D scanning systems during research and development, so you can be confident that your new part will fit and function like the original equipment. By replicating the OE spun body design, the single laser fusion weld greatly reduces the possibility of a leak, and our compact, low-mass design also allows for greater thermal efficiency. This direct-fit catalytic converter is designed specifically for the 2014-2019 Chevrolet Corvette and interchanges with OE parts 84604832 and 20968757, among others. Hardware is included to eliminate the hassle of working with corroded factory parts. This replacement part is designed to meet or exceed Federal emissions requirements set forth by the EPA, complying with legal standards for OBDII Federally registered vehicles with California or Federal/EPA Emission systems.
Product Features:
See More
Product Features:
- Expertly crafted to replicate OEM-like flow dynamics, maintaining factory performance and fuel efficiency.
- Simplifies installation with essential gaskets and hardware being included in the box.
- Your trusted source for EPA-compliant catalytic converters, providing assurance of genuine compliance while delivering quality that will last.
Top Picks for 2018 Chevrolet Corvette Exhaust Pipes
Upgrade Chevrolet Corvettes with top-quality Exhaust Pipes parts, including 3 OEM and aftermarket selections for your 2018 model.
Borla Performance Exhaust – T-304 Ss, 2.75"Pipe Diameter, Without Catalytic Converters, X-Pipe (Part No.60548)
from
$403.99
Borla (R) X-Pipe works perfectly between the factory catalytic converters and Borla (R) Axle-Back systems. This performance X-Pipe creates power while adding a great sound. With adapters it can be used with headers. Built from premium T-304 austenitic stainless steel, superior to T-400 series (such as 409), to give you the absolute best in performance and durability .Ultra-smooth mandrel bends ensure maximum flow and power, and precision computer numerical control (CNC) manufacturing ensures an accurate fit.
Product Features:
See More
Product Features:
- Built From Premium T-304 Stainless Steel, Superior To T-400 Series (Such As 409), To Give You The Absolute Best In Performance And Durability
- X-Pipes Unleash Horsepower And Create A Custom Sound
- Ultra-Smooth Mandrel Bends Ensure Maximum Flow And Power
- Precision Computer-Controlled CNC Manufacturing Ensures An Accurate Fit
Mahle – Exh. Man. to Pipe Ga (Part No.H4003208705MAH)
from
$25.98
Exh. Man. to Pipe Ga
Felpro – Exhaust Pipe Flange Gasket (Part No.61013)
from
$19.29
Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust
Product Features:
See More
Product Features:
- Meets or exceeds all original equipment specifications
- Application specific design to ensure a perfect fit
- Engineered for the sealing repair environment
- Unsurpassed quality you can trust
- Validated for fit, form, and function
In-Demand Exhaust System Kits for 2018 Chevrolet Corvettes
Select from 14 premium Exhaust System Kits parts for your 2018 Chevrolet Corvette, with prices ranging from $15.99 to $2,924.99.
Dorman – Help – Exhaust Manifold Hardware Kit (Part No.03413)
from
$15.99
Our Exhaust Manifold Hardware Kit comes with the necessary installation components to assist you in replacing your manifold. Save time and energy by having the right hardware on hand when you need it.
Product Features:
See More
Product Features:
- Direct replacement – this exhaust manifold hardware kit matches the original hardware required to secure the exhaust manifold to the engine on specified vehicles.
- Ideal solution – this kit is a reliable replacement for the original hardware that is missing or damaged, or has failed
- Durable construction – this kit is made from quality components to ensure reliable performance and a long service life
- Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience
Corsa Performance – Ss, With Mufflers, 2-3/4"Dia Pipe, Dual Exhaust With Quad Exit, Center Rear Exit (Part No.14762BLK)
from
$2924.99
All CORSA exhaust systems are constructed from premium stainless steel to deliver lasting performance, sound and appearance. Easy bolt-on installation. No welding needed.
Product Features:
See More
Product Features:
- Flow: Average Of 23.06 Percent Gain Over Stock
- Power Gains: Average Increase Of Up To 4 Horsepower
- 2 Pounds Lighter Than Stock
- Patented RSC(R) Technology Is Designed For An Aggressive Sound Under Acceleration And A Drone Free Experience During Cruise
- Easy Bolt-On Installation. No Welding Needed
Corsa Performance – With Mufflers, 2.75"Pipe Dia, Dual Exhaust With Quad Exit, Center Rear Exit (Part No.14762)
from
$2838.99
All CORSA exhaust systems are constructed from premium stainless steel to deliver lasting performance, sound and appearance. Easy bolt-on installation. No welding needed.
Product Features:
See More
Product Features:
- Flow: Average Of 23.06 Percent Gain Over Stock
- Power Gains, Average Increase Of Up To 4 Horsepower
- 4 Pounds Lighter Than Stock
- Patented RSC(R) Technology Is Designed For An Aggressive Sound Under Acceleration And A Drone Free Experience During Cruise
- Easy Bolt On Installation. No Welding Needed
Borla Performance Exhaust – Axle-Back Exhaust System – ATAK (Part No.11875)
from
$2587.99
Borla Performance Industries is the pioneer and leader in the design and manufacture of stainless steel performance exhaust. We began two decades ago as a manufacturer of exhaust systems for such “concours classics” as Rolls-Royce and Ferrari cars and have evolved into the premier manufacturer of today’s performance vehicles for the street, off-road, and racing.Borla is proud to offer a true “Made in the USA” product sold around the world. We are a company of motorheads, and it shows in our products, customer service, and culture. On weekends, the same Borla employees who built your exhaust or helped you with technical support can be found competing at tracks, drag strips, off-road events and car shows. Constructed using T-304 stainless steel for long life and sharp appearance, and features all welded construction for maximum durability. Unlike any other exhaust brand, Borla’systems are designed from scratch on a vehicle-by-vehicle basis. Every car or truck has unique mechanical and acoustical properties, all taken into account as we spend countless hours optimizing muffler body shapes, internal core configurations, flow dynamics,soundand more.
Product Features:
See More
Product Features:
- Increased exhaust velocity adds power, driving excitement, fuel economy, and the distinctive powerful sound
- Each system is built from premium, high-quality austenitic T-304 stainless steel
- Ultra-smooth mandrel bends ensure maximum flow & power, and precision computer-controlled CNC manufacturing ensures an accurate fit
Borla Performance Exhaust – Axle-Back Exhaust System – S-Type (Part No.11855)
from
$2549.99
Borla Performance Industries is the pioneer and leader in the design and manufacture of stainless steel performance exhaust. We began two decades ago as a manufacturer of exhaust systems for such “concours classics” as Rolls-Royce and Ferrari cars and have evolved into the premier manufacturer of today’s performance vehicles for the street, off-road, and racing.Borla is proud to offer a true “Made in the USA” product sold around the world. We are a company of motorheads, and it shows in our products, customer service, and culture. On weekends, the same Borla employees who built your exhaust or helped you with technical support can be found competing at tracks, drag strips, off-road events and car shows. Constructed using T-304 stainless steel for long life and sharp appearance, and features all welded construction for maximum durability. Unlike any other exhaust brand, Borla’systems are designed from scratch on a vehicle-by-vehicle basis. Every car or truck has unique mechanical and acoustical properties, all taken into account as we spend countless hours optimizing muffler body shapes, internal core configurations, flow dynamics,soundand more.
Product Features:
See More
Product Features:
- Increased exhaust velocity adds power, driving excitement, fuel economy, and the distinctive powerful sound
- Each system is built from premium, high-quality austenitic T-304 stainless steel
- Ultra-smooth mandrel bends ensure maximum flow & power, and precision computer-controlled CNC manufacturing ensures an accurate fit
Borla Performance Exhaust – Axle-Back Exhaust System – S-Type (Part No.11874)
from
$2545.99
Borla Performance Industries is the pioneer and leader in the design and manufacture of stainless steel performance exhaust. We began two decades ago as a manufacturer of exhaust systems for such “concours classics” as Rolls-Royce and Ferrari cars and have evolved into the premier manufacturer of today’s performance vehicles for the street, off-road, and racing.Borla is proud to offer a true “Made in the USA” product sold around the world. We are a company of motorheads, and it shows in our products, customer service, and culture. On weekends, the same Borla employees who built your exhaust or helped you with technical support can be found competing at tracks, drag strips, off-road events and car shows. Constructed using T-304 stainless steel for long life and sharp appearance, and features all welded construction for maximum durability. Unlike any other exhaust brand, Borla’systems are designed from scratch on a vehicle-by-vehicle basis. Every car or truck has unique mechanical and acoustical properties, all taken into account as we spend countless hours optimizing muffler body shapes, internal core configurations, flow dynamics,soundand more.
Product Features:
See More
Product Features:
- Increased exhaust velocity adds power, driving excitement, fuel economy, and the distinctive powerful sound
- Each system is built from premium, high-quality austenitic T-304 stainless steel
- Ultra-smooth mandrel bends ensure maximum flow & power, and precision computer-controlled CNC manufacturing ensures an accurate fit
Borla Performance Exhaust – Axle-Back Exhaust System – ATAK (Part No.11903CB)
from
$2485.99
Borla Performance Industries is the pioneer and leader in the design and manufacture of stainless steel performance exhaust. We began two decades ago as a manufacturer of exhaust systems for such “concours classics” as Rolls-Royce and Ferrari cars and have evolved into the premier manufacturer of today’s performance vehicles for the street, off-road, and racing.Borla is proud to offer a true “Made in the USA” product sold around the world. We are a company of motorheads, and it shows in our products, customer service, and culture. On weekends, the same Borla employees who built your exhaust or helped you with technical support can be found competing at tracks, drag strips, off-road events and car shows. Constructed using T-304 stainless steel for long life and sharp appearance, and features all welded construction for maximum durability. Unlike any other exhaust brand, Borla’systems are designed from scratch on a vehicle-by-vehicle basis. Every car or truck has unique mechanical and acoustical properties, all taken into account as we spend countless hours optimizing muffler body shapes, internal core configurations, flow dynamics,soundand more.
Product Features:
See More
Product Features:
- Increased exhaust velocity adds power, driving excitement, fuel economy, and the distinctive powerful sound
- Each system is built from premium, high-quality austenitic T-304 stainless steel
- Ultra-smooth mandrel bends ensure maximum flow & power, and precision computer-controlled CNC manufacturing ensures an accurate fit
Borla Performance Exhaust – Axle-Back Exhaust System – ATAK (Part No.11905)
from
$2359.99
Borla Performance Industries is the pioneer and leader in the design and manufacture of stainless steel performance exhaust. We began two decades ago as a manufacturer of exhaust systems for such “concours classics” as Rolls-Royce and Ferrari cars and have evolved into the premier manufacturer of today’s performance vehicles for the street, off-road, and racing.Borla is proud to offer a true “Made in the USA” product sold around the world. We are a company of motorheads, and it shows in our products, customer service, and culture. On weekends, the same Borla employees who built your exhaust or helped you with technical support can be found competing at tracks, drag strips, off-road events and car shows. Constructed using T-304 stainless steel for long life and sharp appearance, and features all welded construction for maximum durability. Unlike any other exhaust brand, Borla’systems are designed from scratch on a vehicle-by-vehicle basis. Every car or truck has unique mechanical and acoustical properties, all taken into account as we spend countless hours optimizing muffler body shapes, internal core configurations, flow dynamics,soundand more.
Product Features:
See More
Product Features:
- Increased exhaust velocity adds power, driving excitement, fuel economy, and the distinctive powerful sound
- Each system is built from premium, high-quality austenitic T-304 stainless steel
- Ultra-smooth mandrel bends ensure maximum flow & power, and precision computer-controlled CNC manufacturing ensures an accurate fit
Borla Performance Exhaust – Axle-Back Exhaust System – ATAK (Part No.11863CB)
from
$2299.99
Borla Performance Industries is the pioneer and leader in the design and manufacture of stainless steel performance exhaust. We began two decades ago as a manufacturer of exhaust systems for such “concours classics” as Rolls-Royce and Ferrari cars and have evolved into the premier manufacturer of today’s performance vehicles for the street, off-road, and racing.Borla is proud to offer a true “Made in the USA” product sold around the world. We are a company of motorheads, and it shows in our products, customer service, and culture. On weekends, the same Borla employees who built your exhaust or helped you with technical support can be found competing at tracks, drag strips, off-road events and car shows. Constructed using T-304 stainless steel for long life and sharp appearance, and features all welded construction for maximum durability. Unlike any other exhaust brand, Borla’systems are designed from scratch on a vehicle-by-vehicle basis. Every car or truck has unique mechanical and acoustical properties, all taken into account as we spend countless hours optimizing muffler body shapes, internal core configurations, flow dynamics,soundand more.
Product Features:
See More
Product Features:
- Increased exhaust velocity adds power, driving excitement, fuel economy, and the distinctive powerful sound
- Each system is built from premium, high-quality austenitic T-304 stainless steel
- Ultra-smooth mandrel bends ensure maximum flow & power, and precision computer-controlled CNC manufacturing ensures an accurate fit
Borla Performance Exhaust – Axle-Back Exhaust System – S-Type (Part No.11862)
from
$2162.99
Borla Performance Industries is the pioneer and leader in the design and manufacture of stainless steel performance exhaust. We began two decades ago as a manufacturer of exhaust systems for such “concours classics” as Rolls-Royce and Ferrari cars and have evolved into the premier manufacturer of today’s performance vehicles for the street, off-road, and racing.Borla is proud to offer a true “Made in the USA” product sold around the world. We are a company of motorheads, and it shows in our products, customer service, and culture. On weekends, the same Borla employees who built your exhaust or helped you with technical support can be found competing at tracks, drag strips, off-road events and car shows. Constructed using T-304 stainless steel for long life and sharp appearance, and features all welded construction for maximum durability. Unlike any other exhaust brand, Borla’systems are designed from scratch on a vehicle-by-vehicle basis. Every car or truck has unique mechanical and acoustical properties, all taken into account as we spend countless hours optimizing muffler body shapes, internal core configurations, flow dynamics,soundand more.
Product Features:
See More
Product Features:
- Increased exhaust velocity adds power, driving excitement, fuel economy, and the distinctive powerful sound
- Each system is built from premium, high-quality austenitic T-304 stainless steel
- Ultra-smooth mandrel bends ensure maximum flow & power, and precision computer-controlled CNC manufacturing ensures an accurate fit
Borla Performance Exhaust – Axle-Back Exhaust System – S-Type (Part No.11877)
from
$1989.99
Borla Performance Industries is the pioneer and leader in the design and manufacture of stainless steel performance exhaust. We began two decades ago as a manufacturer of exhaust systems for such “concours classics” as Rolls-Royce and Ferrari cars and have evolved into the premier manufacturer of today’s performance vehicles for the street, off-road, and racing.Borla is proud to offer a true “Made in the USA” product sold around the world. We are a company of motorheads, and it shows in our products, customer service, and culture. On weekends, the same Borla employees who built your exhaust or helped you with technical support can be found competing at tracks, drag strips, off-road events and car shows. Constructed using T-304 stainless steel for long life and sharp appearance, and features all welded construction for maximum durability. Unlike any other exhaust brand, Borla’systems are designed from scratch on a vehicle-by-vehicle basis. Every car or truck has unique mechanical and acoustical properties, all taken into account as we spend countless hours optimizing muffler body shapes, internal core configurations, flow dynamics,soundand more.
Product Features:
See More
Product Features:
- Increased exhaust velocity adds power, driving excitement, fuel economy, and the distinctive powerful sound
- Each system is built from premium, high-quality austenitic T-304 stainless steel
- Ultra-smooth mandrel bends ensure maximum flow & power, and precision computer-controlled CNC manufacturing ensures an accurate fit
Borla Performance Exhaust – Axle-Back Exhaust System – ATAK (Part No.11878)
from
$1856.99
Borla Performance Industries is the pioneer and leader in the design and manufacture of stainless steel performance exhaust. We began two decades ago as a manufacturer of exhaust systems for such “concours classics” as Rolls-Royce and Ferrari cars and have evolved into the premier manufacturer of today’s performance vehicles for the street, off-road, and racing.Borla is proud to offer a true “Made in the USA” product sold around the world. We are a company of motorheads, and it shows in our products, customer service, and culture. On weekends, the same Borla employees who built your exhaust or helped you with technical support can be found competing at tracks, drag strips, off-road events and car shows. Constructed using T-304 stainless steel for long life and sharp appearance, and features all welded construction for maximum durability. Unlike any other exhaust brand, Borla’systems are designed from scratch on a vehicle-by-vehicle basis. Every car or truck has unique mechanical and acoustical properties, all taken into account as we spend countless hours optimizing muffler body shapes, internal core configurations, flow dynamics,soundand more.
Product Features:
See More
Product Features:
- Increased exhaust velocity adds power, driving excitement, fuel economy, and the distinctive powerful sound
- Each system is built from premium, high-quality austenitic T-304 stainless steel
- Ultra-smooth mandrel bends ensure maximum flow & power, and precision computer-controlled CNC manufacturing ensures an accurate fit
Borla Performance Exhaust – 1418 C7 Stingray AxleBack ATAK Exhaust 2.75in To Muffler (Part No.11869CB)
from
$1781.99
Borla Performance Industries is the pioneer and leader in the design and manufacture of stainless steel performance exhaust. We began two decades ago as a manufacturer of exhaust systems for such “concours classics” as Rolls-Royce and Ferrari cars and have evolved into the premier manufacturer of today’s performance vehicles for the street, off-road, and racing.Borla is proud to offer a true “Made in the USA” product sold around the world. We are a company of motorheads, and it shows in our products, customer service, and culture. On weekends, the same Borla employees who built your exhaust or helped you with technical support can be found competing at tracks, drag strips, off-road events and car shows. Constructed using T-304 stainless steel for long life and sharp appearance, and features all welded construction for maximum durability. Unlike any other exhaust brand, Borla’systems are designed from scratch on a vehicle-by-vehicle basis. Every car or truck has unique mechanical and acoustical properties, all taken into account as we spend countless hours optimizing muffler body shapes, internal core configurations, flow dynamics,soundand more.
Product Features:
See More
Product Features:
- Increased exhaust velocity adds power, driving excitement, fuel economy, and the distinctive powerful sound
- Each system is built from premium, high-quality austenitic T-304 stainless steel
- Ultra-smooth mandrel bends ensure maximum flow & power, and precision computer-controlled CNC manufacturing ensures an accurate fit
Borla Performance Exhaust – Axle-Back Exhaust System – ATAK (Part No.11881)
from
$1654.99
Borla Performance Industries is the pioneer and leader in the design and manufacture of stainless steel performance exhaust. We began two decades ago as a manufacturer of exhaust systems for such “concours classics” as Rolls-Royce and Ferrari cars and have evolved into the premier manufacturer of today’s performance vehicles for the street, off-road, and racing.Borla is proud to offer a true “Made in the USA” product sold around the world. We are a company of motorheads, and it shows in our products, customer service, and culture. On weekends, the same Borla employees who built your exhaust or helped you with technical support can be found competing at tracks, drag strips, off-road events and car shows. Constructed using T-304 stainless steel for long life and sharp appearance, and features all welded construction for maximum durability. Unlike any other exhaust brand, Borla’systems are designed from scratch on a vehicle-by-vehicle basis. Every car or truck has unique mechanical and acoustical properties, all taken into account as we spend countless hours optimizing muffler body shapes, internal core configurations, flow dynamics,soundand more.
Product Features:
See More
Product Features:
- Increased exhaust velocity adds power, driving excitement, fuel economy, and the distinctive powerful sound
- Each system is built from premium, high-quality austenitic T-304 stainless steel
- Ultra-smooth mandrel bends ensure maximum flow & power, and precision computer-controlled CNC manufacturing ensures an accurate fit
Most Sold 2018 Chevrolet Corvette Exhaust Manifold and Headers
Explore our best-selling Chevrolet parts for the 2018 Corvette among 3 OEM and aftermarket options starting from $17.99.
Dorman – Help – Exhaust Manifold Hardware Kit (Part No.03413B)
from
$17.99
This exhaust manifold hardware kit matches the original hardware required to secure the exhaust manifold to the engine on specified vehicles, and is made from quality materials for reliable performance.
Product Features:
See More
Product Features:
- Direct replacement – this exhaust manifold hardware kit matches the original hardware required to secure the exhaust manifold to the engine on specified vehicles.
- Ideal solution – this kit is a reliable replacement for the original hardware that is missing or damaged, or has failed
- Durable construction – this kit is made from quality components to ensure reliable performance and a long service life
- Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience
Dorman – Help – Exhaust Manifold Hardware Kit – M8-1.25 Stainless Steel (Part No.03413HP)
from
$28.99
This exhaust manifold hardware kit matches the original hardware required to secure the exhaust manifold to the engine on specified vehicles, and is made from quality materials for reliable performance.
Product Features:
See More
Product Features:
- Upgraded hardware – this set of twelve M8-1.25 x 30mm exhaust manifold mounting bolts are 100 percent stainless steel for superior heat and corrosion resistance.
- Convenient solution – kit contains all the application-specific hardware necessary to install one exhaust manifold
- Matches fit – this hardware matches the fit and function of the factory fasteners, while offering superior durability
- Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience
Dorman – Exhaust Manifold Hardware Kit (Part No.675-226)
from
$22.49
This exhaust manifold hardware kit matches the original hardware required to secure the exhaust manifold to the engine on specified vehicles, and is made from quality materials for reliable performance.
Product Features:
See More
Product Features:
- Direct replacement – this exhaust manifold hardware kit matches the original hardware required to secure the exhaust manifold to the engine on specified vehicles
- Ideal solution – this kit is a reliable replacement for the original hardware that is missing or damaged, or has failed
- Durable construction – this kit is made from quality components to ensure reliable performance and a long service life
- Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience
Top-Rated Exhaust Parts Brands For Your 2018 Chevrolet Corvette
Shop for the best-rated brands offering Exhaust Parts and other products for your 2018 Chevrolet Corvettes. Below you’ll find some of our best rated Exhaust Parts from Dorman, and more. Exhaust Parts from these brands that fit a 2018 Corvette start at just $15.99 and are rated as high as 4 stars. OEM and aftermarket Exhaust Parts don’t get more top quality, durable, and affordable than from the brands below.
Popular Dorman 2018 Chevrolet Corvette Exhaust Parts
When it comes to maintaining or upgrading your 2018 Chevrolet Corvette, using quality Exhaust Parts is essential to ensure durability and a perfect fit. Dorman ticks all of those boxes. We offer a wide selection of Dorman Exhaust Parts, specifically designed for the 2018 Chevrolet Corvette. With over 4 Dorman brand Exhaust Parts in stock, you’re sure to find what you need. The prices for these top-notch parts start as low as $15.99, with an average price of just $21.37. Plus, with over 37 customer reviews and an average rating of 4 stars, you can trust that our Dorman Exhaust Parts will get the job done right. Choose Advance Auto Parts for reliability, quality, and expert-approved parts that keep your vehicle running strong.
FAQs for 2018 Chevrolet Corvette Exhaust Parts
Which Exhaust Parts are best-sellers for 2018 Chevrolet Corvettes?
Out of 22 Exhaust Parts that fit 2018 Chevrolet Corvettes, the following parts are the top sellers:
- Exhaust Manifold Gasket Set (12067896) – $25.99
- Axle-Back Exhaust System – ATAK (12259427) – $2,359.99
- Axle-Back Exhaust System – ATAK (12259342) – $2,485.99
What’s the price range for 2018 Chevrolet Corvette Exhaust Parts?
Exhaust Part prices for the 2018 Chevrolet Corvette start at $15.99 and go up to $2,924.99 for the most premium parts.
What’s the average price of a Exhaust Part for a 2018 Chevrolet Corvette?
The average price for Exhaust Parts for the 2018 Chevrolet Corvette is $1,434.29. Keep in mind the variety of part types within our Exhaust Part category so you are likely to find a wide range of prices across a variety of parts and components.
Does Advance Auto Parts sell Exhaust Parts for other Chevrolet Corvette model years?
What are the cheapest Exhaust Parts for my 2018 Chevrolet Corvette?
The cheapest 2018 Chevrolet Corvette Exhaust Parts we carry in stock are:
- Exhaust Manifold Hardware Kit (10840978) – $15.99
- Exhaust Manifold Hardware Kit (10214558) – $17.99
- Exhaust Pipe Flange Gasket (19780993) – $19.29
- Exhaust Manifold Hardware Kit (12592650) – $22.49
- Exh. Man. to Pipe Ga (12013851) – $25.98
What are the top-rated Exhaust Parts that fit the 2018 Chevrolet Corvette?
Out of 111 reviews by customers, our 2018 Chevrolet Corvette Exhaust Parts have an average customer rating of . These are some of the highest-rated Exhaust Part types for the 2018 Chevrolet Corvette and their top-rated products:
- Exhaust System Kits
- Exhaust Manifold Hardware Kit (10840978) – $15.99
What types of Exhaust Parts do you sell for my 2018 Chevrolet Corvette?
As of 2/5/25, these are some of the most in-demand types of Exhaust Parts for a 2018 Chevrolet Corvette:
Can I get help with 2018 Chevrolet Corvette Exhaust Part orders?
Contact our customer support team, by chat or phone, through the help desk page, where you can find instant answers about Chevrolet Exhaust Parts and more.
What is your return policy for Chevrolet Corvette Exhaust Parts?
Advance Auto Parts keeps returns simple. For new Chevrolet Corvette Exhaust Parts and accessories, your online orders can be returned, in their original condition, within 45 days. For requirements, see the returns page.
