1985 Chevrolet Corvette Transmission Parts

Below you will find various in-demand Chevrolet Transmission Parts, components and accessories for your 1985 Corvette. Advance Auto Parts has popular Corvette parts like Automatic Transmission Parts, Transmission Mounts, Transmission Cooler and Parts and more. You’ll also find aftermarket and OEM Transmission Parts for other Corvette model years including 2012, 2013, 2014, 2015, 2016, 2017, 2018, 2019, 2020 and more. Select a category of 1985 Chevrolet Corvette Transmission Parts below and start saving instantly.

Please Select your Vehicle to See Exact Fit Parts

Popular 1985 Chevrolet Corvette Transmission Parts Categories

Gear Shift Levers

Transmission Torque Converters

OE Transmission Coolers

Transfer Shaft Bearing

Manual Transmission Differential Bearings

Transmission Solenoids

Transmission Oil Cooler Lines

Transmission Shift Cables

Manual Transmission Output Shaft Bearings

Transmission Pan Gaskets

Transmission Oil Cooler Fittings

Pinion Bearings

Transmission Mounts

Transmission Oil Pans

Transmission Master Repair Kits

Transmission Rebuild Kits

Transmission Oil Pan Gaskets

Automatic Transmission Wiring Harness

Automatic Transmission Differential Bearings

Transmission Bushings

Detent Cables

Automatic Transmission Output Shaft Seals

Automatic Transmission Oil Pump Seals

Pinion Seals

Automatic Transmission Dipstick Seals

Transmission Seals and O-rings

Manual Transmission Bearing and Seal Overhaul Kits

Torque Converter Seals

Extension Housing Seals

Automatic Transmission Case Vents

Shaft Seals

Manual Transmission Gasket Sets

Miscellaneous Automatic Transmission Seals

Transmission Shift Kits

Back Up Lamp Connectors

Transmission Bands

Automatic Transmission Selector Shaft Seals

Automatic Transmission Flexplate Mounting Bolts

Automatic Transmission Output Shaft Bearings

Automatic Transmission Torque Converter Clutch Switch Connectors

Automatic Transmission Detent Cable Seals

Automatic Transmission Oil Pump Gaskets

Automatic Transmission Oil Pump O-Rings

Automatic Transmission Speedometer Pinion Seals

Automatic Transmission Shifter Cable Brackets

Remanufactured Automatic Transmissions

Torque Converter Bearings

Manual Transmission Seal Kit

A.T. Torque Conv Clutch Temp Switch Connectors

Back Up Light Switch Clips

Automatic Transmission Oil Pump Seal Kit

Essential Transmission Parts for 1985 Chevrolet Corvettes

from

$9.59

AT EXT HOUSING SEAL

from

$18.99

You can forget about the problem of shearing a torque converter bolt after you install these super strong 200,000 Pounds Per Square Inch gems. They are designed for each specific application and provide the optimum grip. Kits come with hardened parallel ground washers.

Product Features:

Super Strong, Rated At 200,000 PSI
Kits Come With Hardened Parallel Ground Washers
Delivers ARP Quality And Reliability
Made In USA
0.590″ Underhead Length
M10 X 1.5 Thread Size
Set of 3

from

$9.59

AT SEL SHAFT SEAL

from

$11.99

Anchor 2378 This mount supports the transmission and dampens vibration. Each mount is specifically engineered and designed to OE standards. Natural and SBR rubber provide maximum life and performance. Steel fasteners are heat treated grade 5 bolts. A special bonding agent is used to ensure a rubber to metal bond. Rubber material is mixed to specific Durometer, hardness.

Product Features:

MAXIMUM LIFE & PERFORMANCE: Both natural and SBR (Styrene Butadiene) rubber provide good abrasion resistance and aging stability to ensure maximum life and performance.
MEETS OR EXCEEDS DUROMETER MEASUREMENTS: All rubber material is manufactured to specific Durometer (hardness) measurements based on the vehicle’s application requirements.
HARDENED STEEL FASTENERS: All fasteners are made of hardened steel with heat treated Grade #5 bolts.
SUPERIOR BOND: A special Chemlok bonding agent is used to ensure a superior rubber-to-metal bond.
HYDRAULIC MOUNT DESIGN: Hydraulic Mounts (applicable where OE) are designed for most front wheel drive vehicles because transverse drive train mounting.
For Years: 1957-1984
Weight approx: 2 Lbs
Height: 1.8 In.: 45.7 mm
All Bolt Holes Inline
Bolt Centerline: 1.5 Inch: 38.1 Mm

from

$3.19

Product Features:

ATP Transmission Seals And Gaskets are exact fit, no compromise replacement parts

from

$21.49

Modern vehicles may have 100 or more electrical harness connectors in every operating system of the vehicle. Terminal tension may weaken with time or corrosion may occur within the connector housing making replacement necessary. When replacing any harness-connector assembly approved wire termination methods must be followed to ensure a successful and long-term solution to the original problem is made. A failed terminal connection, terminal corrosion or damaged wire will result in an electrical system fault.

Product Features:

Carquest electrical connectors meet or exceed OE wire gauge, insulation, and terminal material requirements.
WVE electrical connectors meet or exceed OE wire gauge, insulation, and terminal material requirements.
Product constructed to meet all design and operating characteristics as intended by the manufacturer.
OE specified wire gauge to ensure a reliable electrical connection
Designed to meet or exceed OE specifications in form, fit and function

from

$38.99

Flywheel and flex plate bolts play an important role in the performance and safety of race cars and street machines alike. That is why the fastener experts at ARP have developed special bolts that are far superior to OEM hardware. ARP offers two styles of flywheel/flex plate bolts: High Performance and Pro Series. They are both forged from aerospace alloy and heat treated prior to thread rolling and machining. Both feature an exclusive, flat, 12 point head design and larger than stock shank diameter for increased strength and improved flywheel register. The popular High Performance series is rated at 180,000 PSI, and the premium grade Pro Series, originally developed for NASCAR competition, has a 200,000 PSI rating. Complete with washers and nuts where applicable.

Product Features:

Forged From Aerospace Alloy And Heat Treated Prior To Thread Rolling And Machining
Feature An Exclusive, Flat, 12 Point Head Design And Larger Than Stock Shank Diameter
Flanged Nut
Increased Strength And Improved Flywheel Register
0.88″ Underhead Length
Set of 6
200,000 PSI
1-PC Rear Main

from

$1.99

Dorman offers a comprehensive line of Clip / Spring Nuts for a range of automotive applications. They are available for use with a large variety of screw sizes, throat depths, and panel ranges.

Product Features:

Constructed of high-quality materials for Length-lasting durability
Many different styles are available, including threaded and wide panel
Packaged in a variety of piece counts for use with both small and large projects
Also suitable for a broad range of industrial and commercial uses

from

$9.99

National has built a reputation as one of the most respected names in the industry. We have offered premium sealing solutions for more than 75 years. Our design team keeps pace with the industry and provides advanced solutions for today’s vehicles.

Product Features:

Design type: spring loaded; multi-lip
Temperature range: -80 Deg. F to 350 Deg. F / -62 Deg. C to 176 Deg. C
Good dry heat resistance
Excellent low temperature capability
Delivers quality and reliable performance for every type of repair

from

$24.99

Fel-Pro® gaskets are specifically designed for the repair environment to deliver a reliable seal on even the most troublesome applications. Designed for imperfect sealing surfaces and manufactured with proprietary materials, you can count on Fel-Pro for innovative sealing solutions for the real-world repair environment.

Product Features:

Meets or exceeds all original equipment specifications
Application specific design to ensure a perfect fit
Engineered and manufactured specifically for the repair environment
Unsurpassed quality you can trust
Includes all parts needed to complete the repair

from

$142.99

ATHARNESS VSS REPR

from

$34.49

Detent cables connect the throttle mechanism to the transmission. Old cables can bind, break, or just become sluggish. The best repair is to replace the old cable with a new one. ATP Detent cables are designed to fit and function just like the original part to ensure durability and long life.

Product Features:

Includes brackets, grommets, etc to match original
Helps transmission determine ideal downshift
Improves vehicle performance

from

$11.79

AT OIL PUMP GASKET

from

$94.99

AT CONTR SOLENOID

from

$7.99

Value-priced bearing meets all cataloged application requirements.

Product Features:

Brand may vary by location

from

$14.99

Design type: spring loaded; multi-lip
Temperature range: -20 Deg. F to 300 Deg. F / -29 Deg. C to 49 Deg. C
Resistance to EP lubricants
Low swell in hydrocarbon fluids
Delivers quality and reliable performance for every type of repair

from

$7.49

This transfer case vent is designed to match the fit and function of the original vent on specified vehicles, and is engineered for durability and reliable performance.

Product Features:

Direct replacement – this transfer case vent is designed to match the fit and function of the original vent on specified vehicles
Restores functionality – reliable replacement for an original vent that has failed due to blockage or fatigue
Durable construction – this part is made from quality materials to ensure reliable performance and long service life
Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience

from

$33.49

GM Genuine Parts Transmission Oil Pan Gaskets are designed, engineered, and tested to rigorous standards, and are backed by General Motors. GM Genuine Parts are the true OE parts installed during the production of or validated by General Motors for GM vehicles. Some GM Genuine Parts may have formerly appeared as ACDelco GM Original Equipment (OE).

Product Features:

Some GM Genuine Parts may have formerly appeared as ACDelco GM Original Equipment (OE)
GM Genuine Parts are designed, engineered and tested to rigorous standards, and are backed by General Motors
GM Engineers design and validate OE parts specifically for your Chevrolet, Buick, GMC, or Cadillac vehicle
GM regularly updates production and service part designs to integrate new materials and technologies

from

$178.99

Shift Improver Kits – Buick, Chevrolet, GMC, Olds, Pontiac – 1968 to 1981 TH-350 and M38 Application: 1968 to 1981 TH-350 and M38 (for TH-350C use Transpak # 30235) Recalibrate your automatic transmission for optimum performance and extended life! Provides crisp shifts on any stock automatic transmissions. Elimination of soft sluggish shifts, shift overlap, and excess wear on clutches and bands due to slippage. Improves transmission life. Transmission removal not required. The B&M Shift Improver Kit the easiest way to get the stout performance you’ve always wanted out of your automatic transmission – and you get two modes of performance to select from: Heavy Duty, or Street/Strip. It’s our least expensive and simplest to install kit. All you need are a few dollars and some hand tools! In the space of an afternoon, you can turn your transmission into a B&M-tuned unit! Just ask the thousands of satisfied customers that have installed one in their transmissions! Stage 1 – Heavy Duty Firm positive shifts without loss of driver comfort for improved performance in all street vehicles. Recommended for regular passenger vehicles. Stage 2 – Street/Strip Provides very positive shifts for high performance street use or for competitive events. This model is for the enthusiast who wants the hardest, quickest possible shift.

Product Features:

Recalibrate Auto. Transmission
Optimum Performance
Select Your App. Mode
Improves Transmission Life
Trans. Removal Not Required
Downshift At Any Speed
Great For Trailer Towing
For Heavy Loads Driving Downhill

from

$3.99

Value-priced seal meets all cataloged application requirements.

Product Features:

Brand may vary by location

from

$9.99

Product Features:

Brand may vary by location

from

$55.99

Our products are engineered and tested to provide years of trouble free operation. Backed by over 50 years of mobile a/c experience, fix it once and fix it right with Imperial.

Product Features:

Imperial Econo-Kool tube and fin transmission cooler
Size: 3/4″ x 5″ x 15-7/8″
Compact and mid-size cars
GVWR up to 16,000 lbs.; towing up to 2,500 lbs.
Compatible with OEM cooler systems
Ultrasonically soldered for reliability
100% pressure testing to 150 PSI for quality assurance
High efficiency turbulators
Compatible with OEM cooler systems
Ultrasonically soldered for reliability
100% pressure testing to 150 PSI for quality assurance
High efficiency turbulators

from

$292.99

Add fluid capacity to your transmission. Extra fluid means more cooling, and more cooling means better efficiency and performance. Add life to your transmission with a B&M Deep Pan! Adds 2 additional quarts to the system.

Product Features:

Additional Oil Capacity
More Cooling Ability
No Dipstick Modification
Some Include Fluid Pickup Extension
Built-In Drain Plugs

from

$8.99

Manufactured with premium-grade steel, National taper bearing cups feature crowned raceways to ensure even load distribution.

Product Features:

PREMIUM MATERIALS – Precision manufactured using premium-grade steel for outstanding durability and performance
SMOOTH ROTATION – Crowned raceways for even load distribution
OE-STYLE DESIGN – Engineered to meet OE specifications
COMPREHENSIVE COVERAGE – Industry-leading coverage for domestic and import applications
RIGOROUS TESTING – Comprehensive testing throughout design and development processes by National engineers for quality you can count on

from

$46.99

REUSABLE AT PAN GSKT

from

$9.99

Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust.

Product Features:

Meets or exceeds all original equipment specifications
Application specific design to ensure a perfect fit
Unsurpassed quality you can trust
Validated for fit, form and function
Each Fel-Pro gasket, no matter how small, is engineered to exacting standards with proprietary design, engineering and manufacturing processes

from

$4.29

AT DETENT CABLE SEAL

from

$4.19

AT DETENT CABLE SEAL

Upgrade your 1985 Chevrolet Corvette with Top-Quality Transmission Parts

When it comes to maintaining or upgrading your 1985 Chevrolet Corvette, nothing is more important than using high-quality OEM or aftermarket parts that you can trust. Whether you’re repairing damage to your Chevrolet or enhancing its overall performance, Transmission Parts are key to keeping your Corvette functioning at its best. At Advance Auto Parts, we offer a wide selection of 104 Transmission Parts for the 1985 Chevrolet Corvette, designed to meet your needs without breaking the bank. From Automatic Transmission Part replacements to Transmission Mounts upgrades, we’ve got you covered with parts that fit your vehicle perfectly and ensure long-lasting performance.

Affordable Prices and Wide Selection

Shopping for Transmission Parts for any vehicle can be a hassle, especially if you’re on a budget. But with Advance Auto Parts, you can find high-quality Transmission Parts for your 1985 Chevrolet Corvette at great prices. Our Transmission Parts inventory for this model ranges from just $1.99 to $1,609.99, with an average price of $174.43. Our 104 Transmission Parts in stock come from 20 trusted brands, so you’re sure to find the right part for your 1985 Chevrolet Corvette without overspending.

Top Brands and High Customer Satisfaction

Advance Auto Parts takes pride in offering only the best brands in the automotive industry. For your 1985 Chevrolet Corvette, we stock popular OEM and aftermarket Transmission Parts from top names like National, B & M, Imperial, and more. National Transmission Parts start at just $6.99 and boast an impressive 4.3 stars average rating from customers. B & M and Imperial also bring quality to the table, with Transmission Parts available starting at $11.99, and at an average 4.1 stars rating. With 297 customer reviews and counting, our 1985 Chevrolet Corvette Transmission Parts have a strong track record of reliability, ensuring you can trust your purchase.

Explore Related Parts and More

While you’re here, don’t forget to check out other essential categories that go hand in hand with Transmission Part upgrades. Explore related part types like Batteries and Chargers, Oil and Lubricants and more to make sure your 1985 Chevrolet Corvette is always ready to roll. We’re committed to providing you with everything you need to keep your Corvette in top shape, all in one place. Start shopping confidently below for your 1985 Chevrolet Corvette!

Best-Selling Automatic Transmission Parts for 1985 Chevrolet Corvettes

Enhance the driving experience in your Chevrolet with 12 quality Automatic Transmission Part components, starting at $7.49.

show more show less

from

$7.49

This transfer case vent is designed to match the fit and function of the original vent on specified vehicles, and is engineered for durability and reliable performance.

Product Features:

Direct replacement – this transfer case vent is designed to match the fit and function of the original vent on specified vehicles
Restores functionality – reliable replacement for an original vent that has failed due to blockage or fatigue
Durable construction – this part is made from quality materials to ensure reliable performance and long service life
Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience

from

$36.99

Pro-King is the leading supplier of transmission and driveline products in the aftermarket. All products are designed to meet or exceed OE quality, form, fit and function.

Product Features:

Meets or exceeds OE specifications

from

$7.99

ATP Detent Cable End repair damaged or bent end clips found on 1980-96 General Motors applications.

Product Features:

Saves money by allowing cable repair instead of replacement.
Easy to use

from

$9.59

AT OIL PUMP ORING

from

$36.49

AUTO TRANS BAND

from

$12.79

AT FRT PUMP BUSHING

from

$65.99

ATP Automatic Transmission Control Solenoid (Lock-Up)

from

$34.49

Includes brackets, grommets, etc to match original
Helps transmission determine ideal downshift
Improves vehicle performance

from

$51.99

AT/HARNESS VSS REPR

from

$1609.99

Moveras Remanufactured Transmissions manufactures automatic transmissions for virtually every vehicle on the road; We are committed to remanufacturing transmissions to the same standards and methodologies used for OEM transmissions; Each Moveras transmission is produced in a World Class manufacturing facility; Our entire process has been developed from scratch, utilizing LEAN manufacturing principles; Our transmissions are produced in a Clean Room environment; Every transmission is built to the same exacting standards by using a precisely documented and controlled process.

Product Features:

OEM-Level Quality: Each transmission is remanufactured to meet or exceed original manufacturer specifications for seamless compatibility and superior performance
Advanced Remanufacturing Process: Each transmission is completely disassembled, and critical components are replaced or upgraded to ensure long-lasting performance
High-Quality Torque Converter: A fully remanufactured torque converter is included, tested for leaks, lock-up functionality, and balance to enhance durability and smooth operation
Precision Engineering: Each valve body is remanufactured to OEM specifications, ensuring proper hydraulic flow and consistent shift performance
Dyno Testing: All Moveras transmissions are dyno-tested under real-world driving conditions to ensure reliable, consistent performance before leaving the factory
Nationwide Limited Warranty: Every transmission comes with a comprehensive Limited Warranty, giving you confidence and peace of mind, no matter where you are on the road

from

$69.99

These universal fit adjustable cables will work in 95% of all listed transmission applications, yet are less expensive than OE models. Use as straight replacement cable or ease the installation of transmission swaps.

Product Features:

Universal Fit Adjustable
Less Expensive Than OE Models
Ease Trans. Swap Installation

from

$33.99

Cable Bracket, GM (Bandit style shifters only) APPLICATION: For TH-400, 350, 250, 200, 700R4, 200-4R with 80797, 80798 or 81050 shifter.

Product Features:

Shifter Service Parts
Steel
Natural Finish
Sold individually
Replacement for Bandit shifters

Most Popular 1985 Chevrolet Corvette Transmission Mounts

Customize your Chevrolet with 3 Transmission Mounts products like Transmission Mounts, all priced under $99.99.

show more show less

from

$99.99

Constructed of durable polyurethane to handle the stress oh high horsepower. Absorbs vibration and lasts longer than rubber Features unique built-in safety lock to keep from separating under high torque loads. Ideal for use on street or strip applications. Complete with grade-8 mounting hardware.

Product Features:

Durable Polyurethane
Absorbs Vibration
Last Longer Than Rubber
Built-In Safety Lock

from

$53.99

Product Features:

Durable polyurethane to handle the stress of high horsepower
Same durometer as other BlackHeart and Hooker poly mounts
Can be used in place of 1-bolt or 2-bolt mount
Absorbs vibration and last longer than rubber
Ideal for use on street or strip applications
Molded indentions for socket clearance to ease installation
Complete with Grade 8 mounting hardware
Bolt Spacing on the Wider Side: 4-inch
Bolt Spacing on the Narrow Side: 1.5-inch

from

$48.99

Product Features:

Durable polyurethane to handle the stress of high horsepower
Same durometer as other BlackHeart and Hooker poly mounts
Can be used in place of 1-bolt or 2-bolt mount
Absorbs vibration and last longer than rubber
Ideal for use on street or strip applications
Molded indentions for socket clearance to ease installation
Complete with Grade 8 mounting hardware
Bolt Spacing on the Wider Side: 4-inch
Bolt Spacing on the Narrow Side: 1.5-inch

Top Picks for 1985 Chevrolet Corvette Transmission Cooler and Parts

Upgrade Chevrolet Corvettes with top-quality Transmission Cooler and Parts parts, including 11 OEM and aftermarket selections for your 1985 model.

show more show less

from

$85.99

Our products are engineered and tested to provide years of trouble free operation. Backed by over 50 years of mobile a/c experience, fix it once and fix it right with Imperial.

Product Features:

Imperial high-performance transmission cooler
Size: 3/4″ x 10″ x 15-7/8″
SAE 45-degree fittings for maximum reliability
Electrostatic powder-coated to prevent corrosion
SAE 45 degree fittings for maximum reliability
Electrostatically powder coated to prevent corrosion
All aluminum lightweight construction
SAE 45 degree fittings for maximum reliability
Electrostatically powder coated to prevent corrosion
All aluminum lightweight construction

from

$73.99

The Imperial Maxi-Cool XL’s plate and fin design offer excellent cooling efficiency in a compact, space-efficient design.

Product Features:

Imperial Maxi-Cool plate and fin transmission cooler
Size: 3/4″ x 11″ x 7-1/2″
Mid-size and full-size cars, pickups
GVWR up to 20,000 lbs.; towing up to 2,500 lbs.
Compatible with OEM cooler systems
Made with the highest quality materials
100% pressure testing to 150 PSI for quality assurance
33% more efficient than a comparable tube and fin design

from

$11.99

Our products are engineered and tested to provide years of trouble free operation. Backed by over 50 years of mobile a/c experience, fix it once and fix it right with Imperial.

Product Features:

Imperial mounting kit system
For installation of transmission coolers and electric fans
Provides quick, effective installation of Imperial products
Contains nylon mounting rods, foam pads and locking buttons
Aftermarket electric fan and cooler mounting rods
Made with the highest quality materials
Quality machined for durability
Removable buttons for relocation
Aftermarket electric fan and cooler mounting rods
Made with the highest quality materials
Quality machined for durability
Removable buttons for relocation

from

$85.99

The Imperial Maxi-Cool XL’s plate and fin design offer excellent cooling efficiency in a compact, space-efficient design.

Product Features:

Class “A” motor homes, large travel trailers, 5th-wheel trailers
GVWR up to 30,000 lbs.; towing up to 10,000 lbs.
Compatible with OEM cooler systems
33% more efficient than a comparable tube and fin design

from

$65.99

Our products are engineered and tested to provide years of trouble free operation. Backed by over 50 years of mobile a/c experience, fix it once and fix it right with Imperial.

Product Features:

Imperial Econo-Kool tube and fin transmission cooler
Size: 3/4″ x 10″ x 15-7/8″
Class “A” motor homes, large travel trailers, 5th-wheel trailers
GVWR up to 26,000 lbs.; towing up to 10,000 lbs.
Compatible with OEM cooler systems
Ultrasonically soldered for reliability
100% pressure testing to 150 PSI for quality assurance
High efficiency turbulators
Compatible with OEM cooler systems
Ultrasonically soldered for reliability
100% pressure testing to 150 PSI for quality assurance
High efficiency turbulators

from

$80.99

The Imperial Maxi-Cool XL’s plate and fin design offer excellent cooling efficiency in a compact, space-efficient design.

Product Features:

Imperial Rapid-Cool plate and fin transmission cooler
Size: 3/4″ x 11″ x 9-1/2″
Pickup trucks and vans, class “C” motor homes, travel trailers to 24′
GVWR up to 24,000 lbs.; towing up to 5,000 lbs.
33% more efficient than a comparable tube and fin design
Compatible with OEM cooler systems
Made with the highest quality materials
100% pressure testing to 150 PSI for quality assurance
33% more efficient than a comparable tube and fin design

from

$52.99

Our products are engineered and tested to provide years of trouble free operation. Backed by over 50 years of mobile a/c experience, fix it once and fix it right with Imperial.

Product Features:

Mid-size and full-size cars, pickups
GVWR up to 18,000 lbs.; towing up to 3,500 lbs
Compatible with OEM cooler systems
Ultrasonically soldered for reliability
100% pressure testing to 150 PSI for quality assurance
High efficiency turbulators
Compatible with OEM cooler systems
Ultrasonically soldered for reliability
100% pressure testing to 150 PSI for quality assurance
High efficiency turbulators

from

$79.99

Our products are engineered and tested to provide years of trouble free operation. Backed by over 50 years of mobile a/c experience, fix it once and fix it right with Imperial.

Product Features:

Imperial high-performance transmission cooler
Size: 3/4″ x 7-1/2″ x 15-7/8″
SAE 45-degree fittings for maximum reliability
Electrostatic powder-coated to prevent corrosion
Up to Class C motorhomes, towing up to 5,000 pounds
SAE 45 degree fittings for maximum reliability
Electrostatically powder coated to prevent corrosion
All aluminum lightweight construction

from

$25.99

Our products are engineered and tested to provide years of trouble free operation. Backed by over 50 years of mobile a/c experience, fix it once and fix it right with Imperial.

Product Features:

Transmission cooler reinstallation kit
Contains part numbers 248001, 226201, 240250 and 4 hose clamps
Provides all hardware for reinstallation of Imperial transmission coolers
Contains nylon mounting rods, foam pads, locking buttons, hose and fitting
Made of high grade nylon for easy installation
Removable buttons for cooler/fan relocation
Made for both transmission coolers and electric fan installation
Comes with Quick Connect coupler

from

$60.99

Our products are engineered and tested to provide years of trouble free operation. Backed by over 50 years of mobile a/c experience, fix it once and fix it right with Imperial.

Product Features:

Imperial high-performance transmission cooler
Size: 3/4″ x 7-1/2″ x 12-1/2″
SAE 45-degree fittings for maximum reliability
Electrostatic powder-coated to prevent corrosion
SAE 45 degree fittings for maximum reliability
Electrostatically powder coated to prevent corrosion
All aluminum lightweight construction
SAE 45 degree fittings for maximum reliability
Electrostatically powder coated to prevent corrosion
All aluminum lightweight construction

from

$65.99

Our products are engineered and tested to provide years of trouble free operation. Backed by over 50 years of mobile a/c experience, fix it once and fix it right with Imperial.

Product Features:

Imperial Econo-Kool tube and fin transmission cooler
Size: 3/4″ x 7-1/2″ x 15-7/8″
Pickup trucks and vans, class “C” motor homes, travel trailers to 24′
GVWR up to 22,000 lbs.; towing up to 5,000 lbs.
Compatible with OEM cooler systems
Ultrasonically soldered for reliability
100% pressure testing to 150 PSI for quality assurance
High efficiency turbulators
Compatible with OEM cooler systems
Ultrasonically soldered for reliability
100% pressure testing to 150 PSI for quality assurance
High efficiency turbulators

In-Demand Transmission Seals for 1985 Chevrolet Corvettes

Select from 20 premium Transmission Seals parts for your 1985 Chevrolet Corvette, with prices ranging from $3.19 to $55.99.

show more show less

from

$12.99

Design type: spring loaded; multi-lip
Temperature range: -20 Deg. F to 300 Deg. F / -29 Deg. C to 49 Deg. C
Resistance to EP lubricants
Low swell in hydrocarbon fluids
Delivers quality and reliable performance for every type of repair

from

$4.99

Value-priced seal meets all cataloged application requirements.

Product Features:

Brand may vary by location

from

$9.59

AT SEL SHAFT SEAL

from

$9.99

Design type: spring loaded; multi-lip
Temperature range: -80 Deg. F to 350 Deg. F / -62 Deg. C to 176 Deg. C
Good dry heat resistance
Excellent low temperature capability
Delivers quality and reliable performance for every type of repair

from

$6.39

AT DPSTK TUBE SEAL

from

$6.99

Product Features:

Design type: springless; single-lip
Temperature range: -40 Deg. F to 225 Deg. F / -40 Deg. C to 107 Deg. C
Good low temperature capability
Low swell in hydrocarbon fluids
Delivers quality and reliable performance for every type of repair

from

$13.99

Value-priced seal meets all cataloged application requirements.

Product Features:

Brand may vary by location

from

$25.99

Design type: spring loaded; multi-lip
Temperature range: -40 Deg. F to 225 Deg. F / -40 Deg. C to 107 Deg. C
Good low temperature capability
Low swell in hydrocarbon fluids
Delivers quality and reliable performance for every type of repair

from

$4.29

AT DETENT CABLE SEAL

from

$12.99

AT EXT HOUSING SEAL

from

$9.99

Motive Gear offers some of the toughest drive train components on the market today. If you are looking for the largest line of performance ring and pinion gear options available with gear sets in a wide range of ratios for nearly every application, both on and off-road, check out Motive Gear. Motive Gear products can be found in the winner’s circle at racing events worldwide. The superior quality of Motive Gear components is the result of years of racing development, outstanding design and state-of-the-art manufacturing methods. Extensive testing is performed on all products by our in-house engineers.

from

$9.59

AT EXT HOUSING SEAL

from

$3.19

Product Features:

ATP Transmission Seals And Gaskets are exact fit, no compromise replacement parts

from

$5.99

Design type: springless; single-lip
Temperature range: -40 Deg. F to 225 Deg. F / -40 Deg. C to 107 Deg. C
Good low temperature capability
Low swell in hydrocarbon fluids
Delivers quality and reliable performance for every type of repair

from

$10.79

AT SPEED PINION SEAL

from

$55.99

ManTransSmallPartKit

from

$18.49

All Motive Gear products are engineered for their specific application and manufactured in state of the art facilities. All of our products undergo rigid quality control processes to insure proper fit, performance and longevity. Motive Gear products can be found in the winners circle at NHRA, IHRA, NMRA, NMCA, SODA, SCORE, BITD, Ultra-4 and NASCAR events because we offer unmatched selection and quality demanded by racers and their crew chiefs – the same quality and selection demanded by DIY customers and top mechanics. With four warehouses strategically located across North America, most Motive Gear orders arrive within 2-4 days. Win with Motive Gear!

from

$18.49

Our wheel seals are engineered using only the highest-quality materials to meet vehicle manufacturer specificatons. We work with suppliers to design seals that meet FAG’s quality standards. Seals are designed to protect wheel end components from contamination – such as dirt, dust, and moisture – and prevent the loss of grease over the life of the bearing. The specifications for wheel seals are very demanding, and the type required depends on the specific application, position and vehicle class.

Product Features:

High-precision and High-quality components used in all KITs
Coverage of classic and new high-tech solutions for the best system coverage

from

$16.79

High-precision and High-quality components used in all KITs
Coverage of classic and new high-tech solutions for the best system coverage

from

$5.19

High-precision and High-quality components used in all KITs
Coverage of classic and new high-tech solutions for the best system coverage

Most Sold 1985 Chevrolet Corvette Transmission Bearings

Explore our best-selling Chevrolet parts for the 1985 Corvette among 9 OEM and aftermarket options starting from $7.99.

show more show less

from

$8.99

Manufactured with premium-grade steel, National taper bearing cups feature crowned raceways to ensure even load distribution.

Product Features:

PREMIUM MATERIALS – Precision manufactured using premium-grade steel for outstanding durability and performance
SMOOTH ROTATION – Crowned raceways for even load distribution
OE-STYLE DESIGN – Engineered to meet OE specifications
COMPREHENSIVE COVERAGE – Industry-leading coverage for domestic and import applications
RIGOROUS TESTING – Comprehensive testing throughout design and development processes by National engineers for quality you can count on

from

$25.99

Manufactured with premium-grade steel, National taper bearing cones feature crowned raceways and rollers to ensure even load distribution.

Product Features:

PREMIUM MATERIALS – Precision manufactured using premium-grade steel for outstanding durability and performance
SMOOTH ROTATION – Crowned raceways and rollers for even load distribution
OE-STYLE DESIGN – Engineered to meet OE specifications
COMPREHENSIVE COVERAGE – Industry-leading coverage for domestic and import applications
RIGOROUS TESTING – Comprehensive testing throughout design and development processes by National engineers for quality you can count on

from

$16.49

Value-priced bearing meets all cataloged application requirements.

Product Features:

Brand may vary by location

from

$21.99

Manufactured with premium-grade steel, National taper bearing cones feature crowned raceways and rollers to ensure even load distribution.

Product Features:

PREMIUM MATERIALS – Precision manufactured using premium-grade steel for outstanding durability and performance
SMOOTH ROTATION – Crowned raceways and rollers for even load distribution
OE-STYLE DESIGN – Engineered to meet OE specifications
COMPREHENSIVE COVERAGE – Industry-leading coverage for domestic and import applications
RIGOROUS TESTING – Comprehensive testing throughout design and development processes by National engineers for quality you can count on

from

$10.99

Value-priced bearing meets all cataloged application requirements.

Product Features:

Brand may vary by location

from

$7.99

Value-priced bearing meets all cataloged application requirements.

Product Features:

Brand may vary by location

from

$35.99

High-precision and High-quality components used in all KITs
Coverage of classic and new high-tech solutions for the best system coverage

from

$23.79

With advanced load-carrying capacity and compact design, tapered roller bearings are used in wheel bearings, transmissions, differentials, transfer cases and other miscellanous applications. FAG manufacturers over 100 million tapered roller bearings annually.

Product Features:

High-precision and High-quality components used in all KITs
Coverage of classic and new high-tech solutions for the best system coverage

from

$16.49

High-precision and High-quality components used in all KITs
Coverage of classic and new high-tech solutions for the best system coverage

Top-Rated Transmission Parts Brands For Your 1985 Chevrolet Corvette

Shop for the best-rated brands offering Transmission Parts and other products for your 1985 Chevrolet Corvettes. Below you’ll find some of our best rated Transmission Parts from National, B & M, and Imperial, and more. Transmission Parts from these brands that fit a 1985 Corvette start at just $6.99 and are rated as high as 4.3 stars. OEM and aftermarket Transmission Parts don’t get more top quality, durable, and affordable than from the brands below.

Popular National 1985 Chevrolet Corvette Transmission Parts

When it comes to maintaining or upgrading your 1985 Chevrolet Corvette, using quality Transmission Parts is essential to ensure durability and a perfect fit. National ticks all of those boxes. We offer a wide selection of National Transmission Parts, specifically designed for the 1985 Chevrolet Corvette. With over 3 National brand Transmission Parts in stock, you’re sure to find what you need. The prices for these top-notch parts start as low as $6.99, with an average price of just $9.66. Plus, with over 22 customer reviews and an average rating of 4.3 stars, you can trust that our National Transmission Parts will get the job done right. Choose Advance Auto Parts for reliability, quality, and expert-approved parts that keep your vehicle running strong.

from $12.99

(13)

Multi-Purpose Seal

“Fixed my leak”

from $6.99

(5)

Multi-Purpose Seal

“Awesome”

from $8.99

(4)

Bearing Race

“Goes with M88010 bearing cup. Application was the pinion bearing race for a Ford 9 Inch on a 1957 Ford F-100.”

Popular B & M 1985 Chevrolet Corvette Transmission Parts

B & M auto parts is one of the highest quality Transmission Part brands in the market. Any 1985 Chevrolet Corvette owner should feel confident when installing genuine B & M parts in their vehicle. To ensure the best fit and performance for your 1985 Corvette, Advance Auto Parts carries a full inventory of 3 B & M Transmission Parts. Plus you will be keeping your Chevrolet in peak condition while saving money because prices on these B & M Transmission Parts range from $33.99 to $86.99, plus, with more than 5 customer reviews and an impressive 4.1 stars average rating, you can be confident the Fram Transmission Parts below will deliver on both quality and value.

from $86.99

(3)

Shift Improver Kit, 82-93 TH700R4

“I put the stage 1 towing kit in my 700r4 in my Cadillac. It feels great. The job wasn’t too hard but not too easy. Having a 3rd or 4th hand may prove ”

from $48.49

(1)

Shifter Accessories, Bracket and Lever Kit Fits TH400/TH350/TH250/200-4R/700R4

“Cable not perfectly straight. It is hard to believe as long as B&M and th400s have been around, that they do not line up better”

from $33.99

(1)

Cable Bracket

“Use it for a 700R4 swap, need to use B & M cable to fit”

FAQs for 1985 Chevrolet Corvette Transmission Parts

Which Transmission Parts are best-sellers for 1985 Chevrolet Corvettes?

Out of 104 Transmission Parts that fit 1985 Chevrolet Corvettes, the following parts are the top sellers:

Transmission Oil Pan Gasket 16 Bolt Hole One Piece Gasket (5781647) – $11.99
Multi-Purpose Seal (18443030) – $9.99
Tapered Roller Bearing Cone (5052513) – $25.99

What’s the price range for 1985 Chevrolet Corvette Transmission Parts?

Transmission Part prices for the 1985 Chevrolet Corvette start at $1.99 and go up to $1,609.99 for the most premium parts.

What’s the average price of a Transmission Part for a 1985 Chevrolet Corvette?

The average price for Transmission Parts for the 1985 Chevrolet Corvette is $174.43. Keep in mind the variety of part types within our Transmission Part category so you are likely to find a wide range of prices across a variety of parts and components.

Does Advance Auto Parts sell Transmission Parts for other Chevrolet Corvette model years?

Yes, we currently carry Transmission Parts for 67 model years of Chevrolet Corvettes between 1953 and 2026. Transmission Parts are bought most frequently for the following model years: 2020, 2019, 2018, 2017, 2016, 2015, 2014, 2013, and 2012.

What are the cheapest Transmission Parts for my 1985 Chevrolet Corvette?

The cheapest 1985 Chevrolet Corvette Transmission Parts we carry in stock are:

Clip Nut – Wide Panel-No. 8 X 3/8 In, Panel Range .025 In – .125 In (5029848) – $1.99
Automatic Transmission Speedometer Pinion Seal (11236107) – $3.19
AT DETENT CABLE SEAL (10861026) – $4.29
Oil Seal (5440610) – $4.99
Oil Seal (15440117) – $4.99

What are the top-rated Transmission Parts that fit the 1985 Chevrolet Corvette?

Out of 297 reviews by customers, our 1985 Chevrolet Corvette Transmission Parts have an average customer rating of . These are some of the highest-rated Transmission Part types for the 1985 Chevrolet Corvette and their top-rated products:

Automatic Transmission Pan and Gaskets
- Chrome Automatic Transmission Oil Pan with Drain Plug (17360645) – $77.99
- Transmission Oil Pan Gasket 16 Bolt Hole One Piece Gasket (5781647) – $11.99

What types of Transmission Parts do you sell for my 1985 Chevrolet Corvette?

As of 3/1/26, these are some of the most in-demand types of Transmission Parts for a 1985 Chevrolet Corvette:

Can I get help with 1985 Chevrolet Corvette Transmission Part orders?

Contact our customer support team, by chat or phone, through the help desk page, where you can find instant answers about Chevrolet Transmission Parts and more.

What is your return policy for Chevrolet Corvette Transmission Parts?

Advance Auto Parts keeps returns simple. For new Chevrolet Corvette Transmission Parts and accessories, your online orders can be returned, in their original condition, within 45 days. For requirements, see the returns page.

1985 Chevrolet Corvette Transmission Parts

ATP – AT EXT HOUSING SEAL (Part No.JO-57)

ARP Auto Racing – For Use With General Motors, 0.590" Under Head L, 10 Mm X 1.5 Thread Size (Part No.230-7304)

ATP – AT SEL SHAFT SEAL (Part No.SO-19)

Anchor – Transmission Mount: Rear, 1 Piece (Part No.2378)

ATP – Automatic Transmission Speedometer Pinion Seal (Part No.SO-13)

Carquest Premium – Multi-Use Connector (Part No.PTA1431)

ARP Auto Racing – For Use With Gen Iii/ Ls Series Chevy Small Block, 0.880" Under Head L (Part No.244-2901)

Dorman – Clip Nut – Wide Panel-No. 8 X 3/8 In, Panel Range .025 In – .125 In (Part No.45406)

National – Multi-Purpose Seal (Part No.3543)

Felpro – Manual Transmission Gasket Set (Part No.TS 30118)

ATP – ATHARNESS VSS REPR (Part No.CE-8)

ATP – Automatic Transmission Detent Cable (Part No.Y-363)

ATP – AT OIL PUMP GASKET (Part No.SG-40)

ATP – AT CONTR SOLENOID (Part No.JE-53)

Driveworks – Taper Bearing Cup (Part No.S-LM-501314)

National – Multi-Purpose Seal (Part No.8460N)

Dorman – Help – Auto Transmission Case Vent (Part No.14689)

GM Genuine Parts – Automatic Transmission Fluid Pan Gasket (Part No.24224781)

B & M – Transpak (Part No.30235)

Driveworks – Oil Seal (Part No.S-3227)

Driveworks – Auto Transmission Output Shaft Seal (Part No.S-4934)

Imperial – Econo-Kool Transmission Oil Cooler (Part No.242010)

B & M – Transmission Cast Deep Pan, Brushed Finish – TH400 (Part No.20280)

National – Bearing Race (Part No.M88010)

ATP – REUSABLE AT PAN GSKT (Part No.JG-140)

Felpro – Transmission Oil Pan Gasket 13 Bolt Hole One Piece Gasket (Part No.TOS 18621)

ATP – AT DETENT CABLE SEAL (Part No.SO-37)

ATP – AT DETENT CABLE SEAL (Part No.SO-36)

Dorman – Help – Auto Transmission Case Vent (Part No.14689)

Pro-King – Automatic Transmission Solenoid (Part No.52-0203)

ATP – Automatic Transmission Detent Cable End (Part No.YR-100)

ATP – AT OIL PUMP ORING (Part No.SO-21)

ATP – AUTO TRANS BAND (Part No.CX-42)

ATP – AT FRT PUMP BUSHING (Part No.CB-30)

ATP – ATP Automatic Transmission Control Solenoid (Lock-Up) (Part No.CE-1)

ATP – Automatic Transmission Detent Cable (Part No.Y-363)

ATP – AT/HARNESS VSS REPR (Part No.JE-15)

Moveras – M01377BA Remanufactured THM700 R4 Automatic Transmission Assembly (Part No.M01377BA)

B & M – Throttle Valve Cable, TH700R4 Transmission (Part No.70242)

B & M – Cable Bracket (Part No.30498)

Lakewood – Trans Mount: Urethane-Chevy (Part No.24350)

Hooker BlackHeart – Hooker BlackHeart Polyurethane Transmission Mount – Red (Part No.71223030HKR)

Hooker BlackHeart – Hooker BlackHeart Polyurethane Transmission Mount – Black (Part No.71223029HKR)

Imperial – High Performance Transmission Oil Cooler (Part No.240516)

Imperial – Maxi-Kool XL Transmission Oil Cooler (Part No.243007)

Imperial – Mounting Kit System (Part No.226201)

Imperial – Maxi-Kool XL Transmission Oil Cooler (Part No.243012)

Imperial – Econo-Kool Transmission Oil Cooler (Part No.241018)

Imperial – Plate and Fin Style Transmission Cooler, Heavy Duty, 3/4" x 9-1/2" x 11" (Part No.243008)

Imperial – Econo-Kool Transmission Oil Cooler (Part No.242012)

Imperial – High Performance Transmission Oil Cooler (Part No.240514)

Imperial – Transmission Oil Cooler Reinstallation Kit (Part No.248002)

Imperial – High Performance Transmission Oil Cooler (Part No.240512)

Imperial – Econo-Kool Transmission Oil Cooler (Part No.242016)

National – Multi-Purpose Seal (Part No.4583)

Driveworks – Oil Seal (Part No.S-9613S)

ATP – AT SEL SHAFT SEAL (Part No.SO-19)

National – Multi-Purpose Seal (Part No.3543)

ATP – AT DPSTK TUBE SEAL (Part No.SO-35)

National – Multi Purpose Seal (Part No.8792S)

Driveworks – Oil Seal (Part No.S-5778)

National – Manual Transmission Output Shaft Seal (Part No.472572)

ATP – AT DETENT CABLE SEAL (Part No.SO-37)

ATP – AT EXT HOUSING SEAL (Part No.HO-9)

Motive Gear – Differential Pinion Seal (Part No.5778)

ATP – AT EXT HOUSING SEAL (Part No.SO-22)

ATP – Automatic Transmission Speedometer Pinion Seal (Part No.SO-13)

National – Multi-Purpose Seal (Part No.240735)

ATP – AT SPEED PINION SEAL (Part No.SO-34)

USA Standard Gear – ManTransSmallPartKit (Part No.78960)

Motive Gear – Differential Pinion Seal (Part No.5778V)

Schaeffler – General Seal (Part No.SS2784)

Schaeffler – Shaft Seal (Part No.SS2571)

Schaeffler – Shaft Seal (Part No.SS2569)

National – Bearing Race (Part No.M88010)

National – Tapered Roller Bearing Cone (Part No.M802048)

Driveworks – Taper Bearing Set (Part No.S-A-36)

National – Tapered Roller Bearing Cone (Part No.LM501349)

Driveworks – Taper Bearing Cone (Part No.S-M-88048)