1985 Buick Skylark Performance and Racing Products
More 1985 Buick Skylark Performance and Racing Products Categories
If you’re looking for an original Performance and Racing Products replacement for a 1985 Buick Skylark, you can search through our selection below. You’ll also find aftermarket and OEM Performance and Racing Products to meet your needs.
Essential 1985 Buick Skylark Performance and Racing Products
Accel – Distributor Cap And Rotor Kit (Part No.8120)
Energy Suspension – Tie Rod Dust Boot (Part No.9.13101G)
from
$9.99
Repair torn and worn-out boots of suspension tie rod ends – without having to buy the entire and expensive tie rod. Adds durability surpassing most OEM rubber boots. Exclusive 5 point sealing action. Choose from four sizes and round or octagon styles. Made of Energy’s Hyper-Flex performance polyurethane for added performance and durability.
Product Features:
See More
Product Features:
- Easy to Install
- Superior Material
- Saves Your Tie Rods
- Lasts Longer
- Looks Great
Earls Performance Product – Brake Bleeder Screws (Part No.280029ERL)
from
$36.99
Brake Bleeder Screws
Edelbrock – Performer RPM; Nitrous Systems (Part No.70092)
from
$766.99Product Features:
- Designed For Carbureted V8s
- Power Increases From 100-250 HP
- Precision EDM Machined Spray Bars
- Simple To Install
Mr. Gasket – Ultra Seal; Valve Cover Gasket Set (Part No.5861)
from
$35.99
Creates a positive seal. Controlled swelling gasket. Thickness will not decrease. Eliminates re-torque of valves. High-tensile strength. Handles ex flange pressure and forms a leak proof seal. Black latex coating.
Product Features:
See More
Product Features:
- Creates a positive seal by controlling swelling
- Available in extra thick for rocker arm clearance
FEL-PRO Performance – Engine Valve Cover Gasket Set (Part No.1624)
from
$24.49
Fel-Pro Performance Gaskets deliver reliable sealing under grueling racing conditions
Product Features:
See More
Product Features:
- Blue Stripe performance cork-rubber gaskets use cork particles evenly distributed throughout a rubber binder resulting in a compressible gasket without leak paths.
- Not intended for use in emission controlled vehicles.
Spectre – Oil Pan (Part No.5480)
from
$99.99
Spectre’s Oil Pan was designed for the small block 1955-1979 Chevrolet 283-350 with driver’s side dipstick (except 1962-1967 Chevrolet II). This triple chrome plated oil pan has a stock 4 quart capacity and uses 1975 and later gasket with thick front seal. This OEM replacement will not fit Corvette with stock exhaust.
Product Features:
See More
Product Features:
- Triple chrome-plated
- Steel construction
- Stock capacity
- Made from high quality material
Spectre – Oil Pan (Part No.5494)
from
$77.99
This Spectre Oil Pan features a steel construction and an unplated raw finish. This stock capacity oil pan was designed for 1955-1979 small block Chevrolet 283-350 engines with driver’s side dipstick (except ’62-67 Chevrolet II). This oil pan won’t fit Corvette models with stock exhaust.
Product Features:
See More
Product Features:
- Steel construction
- Unplated raw finish
- Stock capacity
- Designed for 1955-1979 small block Chevrolet 283-350 engines with driver’s side dipstick
- Won’t fit Corvette models with stock exhaust
FEL-PRO Performance – Engine Crankshaft Seal Kit (Part No.2908)
from
$45.99
Fel-Pro Performance Gaskets deliver reliable sealing under grueling racing conditions
Product Features:
See More
Product Features:
- Fluoroelastomer compound combines optimum resistance to heat, oils and abrasion for longivity.
- Optimizes performance under high crankcase vacuum conditions, elevated temperatures and high RPM levels.
- Not intended for use in emission controlled vehicles.
FEL-PRO Performance – PERFORMANCE REAR MAIN SEAL SET (Part No.2904)
from
$16.29
Fel-Pro Performance Gaskets deliver reliable sealing under grueling racing conditions
Product Features:
See More
Product Features:
- Meets or exceeds all original equipment specifications
- Application specific design to ensure a perfect fit
- Engineered and manufactured specifically for repair applications
- Unsurpassed quality you can trust
- Validated for fit, form, and function
Energy Suspension – Sway Bar End Link Kit (Part No.9.8117R)
from
$25.99
Made of high durometer, very firm, Hyper-Flex performance polyurethane. They’re economical, increase efficiency and are easy to install. Use Energy Suspension sway bar end links with sway bar bushings to get the maximum performance benefit. Combine both for the same effect as buying a larger sway bar. Together they offer a dramatic improvement in performance and handling.
Product Features:
See More
Product Features:
- Made from HYPER-Flex Polyurethane
- Allows Vehicle to Work At Maximum Efficiency
- Easy to Install
- Superior Performance and Greater Longevity
- Lasts Much Longer Than OEM Rubber End Links
Energy Suspension – Sway Bar End Link Kit (Part No.9.8118G)
from
$26.99
Made of high durometer, very firm, Hyper-Flex performance polyurethane. They’re economical, increase efficiency and are easy to install. Use Energy Suspension sway bar end links with sway bar bushings to get the maximum performance benefit. Combine both for the same effect as buying a larger sway bar. Together they offer a dramatic improvement in performance and handling.
Product Features:
See More
Product Features:
- Made from HYPER-Flex Polyurethane
- Allows Vehicle to Work At Maximum Efficiency
- Easy to Install
- Superior Performance and Greater Longevity
- Lasts Much Longer Than OEM Rubber End Links
Accel – Distributor Rotor (Part No.130133)
from
$15.99
Regain horsepower and economy for your street machine with a new ACCEL performance rotor. ACCEL’s high quality manufacturing process results in rotors offering superior protection from arc-thru and crossfire.
Product Features:
See More
Product Features:
- Max Stability For All RPM Ranges
- Heavy Duty For Maximum Energy Transfer
MSD Ignition – Rotor; GM HEI Late Model; External Coil Cap (Part No.8427)
from
$16.99
Rotor assembly for a GM HEI late model with external coil cap Chevy V8 cap-a-dapt. The cap and rotor of any ignition system must be considered maintenance items. Just as you change the oil and filter of your car, you should always replace the cap and rotor as a set. To make things easy, we now offer these cap and rotor replacement kits.
Product Features:
See More
Product Features:
- Resist Carbon Tracking
- Max Voltage Transfer
- Molded From Insulated Material
Airaid – Air Filter (Part No.800-015)
from
$46.49
304 stainless steel mesh. 5 layer construction. Most durable filters in the industry. Outperforms the others in clean air testing. Assures cleanest air possible from washable filter. Provides balance between air flow and peak filtration. Lifetime no hassle warranty.
Product Features:
See More
Product Features:
- Multi-Layer Construction
- Most Durable Filters In The Industry
- Outperforms The Others In Clean Air Testing
- Assures Cleanest Air Possible From Washable Filter
- Washable And Reusable
- Made In The USA
- Lifetime No Hassle Warranty
K&N – Engine Air Filter: Washable Filter, Increase Horsepower & Acceleration (Part No.E-1650)
from
$89.99
The K&N E-1650 replacement air filter is designed to increase horsepower and acceleration by reducing restriction and increasing air flow to your engine. The E-1650 is made with layers of woven cotton that offer superior filtration and can be washed and reused repeatedly. K&N replacement air filters can go up to 50,000 miles before cleaning is required, depending on driving conditions. The E-1650 is easy to install and is custom designed to fit right into the factory air box of many automotive & industrial applications.
Product Features:
See More
Product Features:
- ENGINEERED POWER: State-of-the-art air filter media is designed to increase horsepower and acceleration as well as improve overall engine performance
- RUGGED CONSTRUCTION: K&N Air Filters are manufactured with durable, premium materials and state-of-the-art construction methods to last a lifetime
- 4 LAYERS OF PROTECTION: Multiple layers of premium cotton gauze treated with a specially-designed tacking agent work together to create an intricate mesh of engine filter media that is designed to block and trap harmful contaminants
- CLEAN ONCE EVERY 5 YEARS: Engine air filter only needs cleaning every 75,000 miles under normal highway driving conditions (based on the average miles driven per year of 15,000 miles)
- ULTIMATE LONGEVITY: No-hassle lifetime warranty on stock replacement K&N air filters- limitations apply
- EASY INSTALLATION: K&N Air Filters are pre-treated and ready to drop into your factory air box- they are one of the easiest and most cost-effective vehicle upgrades for quick performance gains
- ECO-FRIENDLY: Using a washable, reusable engine air filter helps reduce replacement air filter waste- a K&N air filter is designed to last longer than 10 or more disposable filters
- MADE IN USA: K&N Air Filters are proudly made in the USA for trusted quality & reliability.
Accel – Super Stock Coil (Part No.8140)
from
$40.99
ACCEL’s super stock is the high-performance replacement for OE canister style coils. Improves starting, idle, throttle response and top RPM power. Works with OE ignitions and computers. Alkyd tower prevents flash over. Uses OE leads. Comes in chrome.
Product Features:
See More
Product Features:
- 42000 Volts
- Effective To 6500 RPM
- Quicker Starting
- Improved Throttle Response
- Higher RPM Power
- Can Finished In Yellow
Accel – Super DIS Coil (Part No.140017)
from
$61.99
ACCEL offers the only true high-performance. AC Delco style DIS coil. Advanced bobbin technology, specialized magnetic steel core and optimum windings result in higher energy and voltage outputs plus arc duration. Direct bolt and plug in installation.
Product Features:
See More
Product Features:
- 10-15% More Energy
- Direct Plug In Replacement Direct OE Fit
- Advanced Bobbin Technology
- Highly Specialized Silicone Magnetic Steel Cores
- Standard Motor Products SMP Dr-39
- MSD 8224
FEL-PRO Performance – Lower Intake Manifold Gasket Set: 2 Piece Set (Part No.1270)
from
$32.49
Fel-Pro Performance Gaskets deliver reliable sealing under grueling racing conditions
Product Features:
See More
Product Features:
- Fel-Pro performance intake manifold gaskets have been tested with virtually all aftermarket cylinder head and intake manifold combinations.
- No exhaust crossover openings or blocking shields
- Embossed steel core laminate w/coating
- Not intended for use in emission controlled vehicles.
FEL-PRO Performance – Lower Intake Manifold Gasket Set: 1 Piece (Part No.1257)
from
$26.49
Fel-Pro Performance Gaskets deliver reliable sealing under grueling racing conditions
Product Features:
See More
Product Features:
- DESIGNED FOR IMPERFECT SEALING SURFACES — Engineered and manufactured specifically for the repair environment to help seal imperfect sealing surfaces
- SEALING TECHNOLOGIES — Exclusive sealing innovations and technologies with proprietary materials and unique design features to ensure a superior seal for your repair
- ENGINEERING EXPERTISE — Parts are designed, reviewed, validated and approved by Fel-Pro engineers through rigorous research and development
- REAL-WORLD TESTED — Parts are tested on-vehicle and validated to ensure optimal performance on the road
- EVERY PART FOR THE REPAIR — Fel-Pro gasket sets include every part needed for the repair unless otherwise noted
FEL-PRO Performance – Cylinder Head Gasket: Multi-Layered Steel, Without Head Bolts (Part No.1003)
from
$39.49
Fel-Pro Performance Gaskets deliver reliable sealing under grueling racing conditions
Product Features:
See More
Product Features:
- PROPRIETARY COATING – Nonstick anti-friction coating seals small surface imperfections
- NO RETORQUE DESIGN – Steel core helps eliminate the need for retorquing head bolts
- SUPERIOR SEAL – Precise embossed Printoseal sealing beads at all vital areas to eliminate leak paths
- STRONG AND DURABLE – Features graphite or reinforced fiber facing material and steel armor for strength and durability
- DESIGNED FOR IMPERFECT SEALING SURFACES – Engineered and manufactured specifically for the repair environment to help seal imperfect sealing surfaces
Edelbrock – Engine Gasket Set (Head / Intake / Exhaust / Valve Cover) for AMC/Jeep (Part No.7372)
from
$171.99
The Edelbrock #7372?head gaskets provide the best sealing solution and are matched to Edelbrock cylinder heads for optimal performance. Edelbrock relies on industry leading head gasket manufactures to ensure our head gasket sets will provide the best fit
Product Features:
See More
Product Features:
- Head: 4.275″ Bore/0.045″ Thick/10.60cc Vol.
- Intake: 1.13″x2.21″ Port/.030″ Thick
- Exhaust: 1.80″x1.30″ Port
- 3/16″ Valve Cover
- Multi Piece Configuration
B & M – Torque Converter, Nitrous Holeshot 3600 (Part No.20482)
from
$563.99
Nitrous Holeshot Converters are Built with the same features as the other B&M Holeshots, with the addition of anti-balloon plates. The anti-balloon plates will allow these converters to stand up to the instant horsepower nitrous delivers.
Product Features:
See More
Product Features:
- 3400-3800 RPM
- Small And Big Blocks
- Serious Performance
- Furnace Brazed
- Fully Balanced
B & M – Tork Master 2000 (Part No.20400)
from
$266.99
Torque Converter – Tork Master 2000 for GM 1965 to 1991 TH400, 425, 375 and 1968 to 1981 TH350, 375B (not 350C) APPLICATION: Tork Master 2000 for GM 1965 to 1991 TH400, 425, 375 and 1968 to 1981 TH350, 375B (not 350C) The Tork Master is B&M’s lowest cost
Product Features:
See More
Product Features:
- New Precision Pump Drive Tube
- Pressure Tested
- Fully Balanced
- Needle Thrust Bearing
- New Thrust Washer
Edelbrock – Performer EGR AMC Intake Manifold (Part No.3731)
from
$484.99Product Features:
- For Idle to 5500 RPM Street-Driven Performance
- Dual-Plane Low-Rise Intake w/180 deg. Firing Order
- Patented Runner Design Ensures Broad Torque Curve
- Excellent Throttle Response and Mid-Range Power
- 50-State Street Legal if Correct Carburetor Used
Edelbrock – Performer Intake Manifold for 1955-86 Small-Block Chevy, Satin Finish (Part No.2101)
from
$257.99Product Features:
- For Idle to 5500 RPM Street-Driven Performance
- Dual-Plane Low-Rise Intake w/180 Deg Firing Order
- Patented Runner Design Ensures Broad Torque Curve
- Excellent Throttle Response and Mid-Range Power
- 50-State Street Legal if Correct Carburetor Used
- Accepts Late-Model Choke; Waterneck; and HEI
- Accepts A/C And Alternator
- Accepts Exhaust Heated Chokes
Hypertech – Street Runner Power Chip (Part No.11821)
from
$158.89
Hypertech Power Chips are engineered for stock 1981-1995 GM vehicles. The Power Chip contains the Hypertech Power Tuning data that controls the engine’s air/fuel ratio and spark advance for maximum power and performance, plus potential gas mileage improvements. Power Chips can be easily installed, using only hand tools. Street Runner Power Chips are designed for daily street driving or competition in unmodified vehicles using a stock thermostat.
Product Features:
See More
Product Features:
- Designed For Daily Street Driving
- For Unmodified Vehicles w/Stock Thermostat
- Controls Engines Air/Fuel Ratio
- Controls Spark Advance For Max Power
- Potential Gas Mileage Improvements
- No Wiring Or Soldering Required
- Installs In Less Than 30 Minutes
Popular 1985 Buick Skylark Performance and Racing Products Categories
1985 Buick Skylark Performance and Racing Products
You count on your 1985 Buick Skylark to run right. That means taking care of it with regular maintenance, necessary repairs, and the right parts. Advance Auto Parts can help with all of that thanks to our extensive inventory of trusted Performance and Racing Products. With 27 Performance and Racing Products ranging in price from $5.99 to $730.99, you’re sure to find everything you need for your 1985 Buick Skylark.
Brands matter. If you want to shop a specific Performance and Racing Products brand, we stock 11 different brands like Energy Suspension, MSD Ignition, and Earls Performance Product. 1985 Buick Skylark Performance and Racing Products start as low as $5.99!
One of the best ways to find top quality OEM or aftermarket Performance and Racing Products is by asking professionals. Short of that, you can shop with confidence thanks to our 62 extensive product reviews on 1985 Buick Skylark Performance and Racing Products.
Did we mention you can order your Performance and Racing Products from our online catalog and have them shipped right to your garage? Or, if you feel like seeing the parts first-hand, search for your nearest Advance Auto Parts location above and pick up in-store when you’re ready. Browse our full Performance and Racing Products inventory for your 1985 Buick Skylark below to get started!
Top-Rated Performance and Racing Products Brands For Your 1985 Buick Skylark
Trusted Performance and Racing Products OEM and aftermarket product brands are what Advance Auto Parts specializes in. The brands we work with are sure to keep that 1985 Buick Skylark running right for years to come. In our inventory you’ll find brands like Energy Suspension, MSD Ignition, Earls Performance Product, and even more.
Popular K&N Performance and Racing Products
You’ll find popular K&N brand products across Performance Air Filters. All are waiting to get your 1985 Buick Skylark back on the road. Some of the top-rated K&N products in these categories are:
from
$64.99
(1)
Engine Air Filter: Washable Filter, Increase Horsepower & Acceleration
Performance Air Filters
Top-Rated Energy Suspension Performance and Racing Products
If Energy Suspension are what you’re looking for, our inventory holds plenty. We stock Energy Suspension brand Performance and Racing Products for your 1985 Buick Skylark, and some of our most reviewed Energy Suspension parts include:
FAQs for 1985 Buick Skylark Performance and Racing Products
What are the most purchased Performance and Racing Products for the 1985 Buick Skylark?
Out of 27 Performance and Racing Products for the 1985 Buick Skylark, the most popular in our inventory are:
