1984 Ford LTD Clutch Systems
More 1984 Ford LTD Clutch Systems Categories
If you’re looking for an original Clutch Systems replacement for a 1984 Ford LTD, you can search through our selection below. You’ll also find aftermarket and OEM Clutch Systems to meet your needs.
Essential 1984 Ford LTD Clutch Systems
Lakewood – Bellhousing: Ford 289-351 (Part No.15200)
from
$999.99
Hydroformed from premium quality steel. Uniform thickness for superior strength. Mig-welded threaded inserts. Stress relief in a stronger and safer bell housing. Precision machined assures proper bolt hole. Includes block plate and hardware. Approved by major racing sanctioning bodies. Meets SFI 6.1 specifications.
Product Features:
See More
Product Features:
- Hydroformed From Premium Quality Steel
- Uniform Thickness For Superior Strength
- Mig-Welded Threaded Inserts
- Stress Relief In A Stronger/Safer Bellhousing
- Precision Machined Assures Proper Bolt Hole
- Includes Block Plate And Hardware
- Approved By Major Racing Sanctioning Bodies
- Meets SFI 6.1 Specifications
National – Bearings (Part No.FC-65354)
from
$8.49
National Oil Seals & Bearings offer a full line of premium oil seals and bearings.
Product Features:
See More
Product Features:
- Premium bearing design matches OEM specifications
- Precision manufactured using premium-grade steel for outstanding durability and performance
- Available in both caged design and full complement
- Industry leading coverage
- Professional technicians know they can depend on National
Driveworks – Clutch Pilot Bearing, Needle Bearing (Part No.S-FC65662)
National – Bearings (Part No.203-FF)
from
$10.99
National Oil Seals & Bearings offer a full line of premium oil seals and bearings.
Product Features:
See More
Product Features:
- Premium bearing design matches OEM specifications
- Precision manufactured using premium-grade steel for outstanding durability and performance
- Controlled heat treating process for lasting performance and extended bearing life
- Industry leading coverage
- Professional technicians know they can depend on National
Dorman – Clutch Pilot Bearing .596 In. x .829 In. Type E, Length .586 In. (sold by each) (Part No.690-044)
from
$3.99
This clutch pilot bearing is designed to match the fit and function of the original part on specified vehicles. Made of quality materials, it is engineered for reliable performance.
Product Features:
See More
Product Features:
- Direct replacement – this clutch pilot bearing is designed to match the fit and function of the original part on specified vehicles
- Ideal solution – this bearing is a reliable replacement for an original part that is missing or has failed due to fatigue
- Durable construction – this part is made from quality materials to ensure reliable performance and long service life
- Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience
Driveworks – Clutch Release Bearing (Part No.S-614014)
from
$15.49
Value-priced bearing meets all cataloged application requirements.
Product Features:
See More
Product Features:
- Brand may vary by location
National – Multi Purpose Bearing (Part No.614014)
from
$47.99
National Oil Seals & Bearings offer a full line of premium oil seals and bearings.
Product Features:
See More
Product Features:
- Premium bearing design matches OEM specifications
- Precision manufactured using premium-grade steel for outstanding durability and performance
- Design improvements include extended life and quiet operation
- Industry leading coverage
- Professional technicians know they can depend on National
ATP – FLYWHEEL SHIM (Part No.FS-10)
from
$25.99
FLYWHEEL SHIM
ATP – FLYWHEEL SHIM (Part No.FS-4)
from
$26.99
FLYWHEEL SHIM
ATP – FLYWHEEL SHIM (Part No.FS-5)
from
$25.99
FLYWHEEL SHIM
Richmond Gear – Differential Cross Shaft (Part No.80-0273-1)
from
$64.99
Richmond Gear is the leading manufacturer of professional quality, high-performance drivetrain products. Our complete line of products ranges from high performance ring-and-pinion sets for serious street and racing applications to torque-hungry manual transmissions and components. Richmond Gear products have been winners both at the Daytona 500 and U.S. Nationals for decades. WINNERS RUN RICHMOND!
Product Features:
See More
Product Features:
- For over 80-years, the Richmond Double-Diamond logo has represented some of the highest quality gears in the racing industry. Winners Run Richmond!
- The superior quality of Richmond gearsets is a result of outstanding design, world class manufacturing and an extensive testing process that is performed on all products.
- Richmond performance gearsets have been winners for decades at: NHRA, NMRA, NMCA, Daytona 500, WISSOTA and U.S. Nationals.
- Richmond Gear is a leading manufacturer of high performance ring and pinion gearsets and drivetrain components, backed by a two year warranty.
- Engineered to perform faster and be more reliable, Richmond performance drivetrain products are the result of a continuous research and development program combined with state-of-the-art manufacturing capabilities.
Hays – Flywheels (Part No.12-060)
from
$169.99
Flywheels
ATP – Automatic Transmission Flex Plate (Part No.Z-157)
from
$79.99
Vehicles with automatic transmissions have a flex plate. The flex plates connects the engine and transmission. Most flex plates are made of a thick piece of sheet metal with bolt holes for the torque converter and teeth for the starter. The job of a flex plate is to allow for expansion of the torque converter as engine RPM increases. The constant expansion and contraction of a flex plate over time can result cracks and/or shearing of the flex plate. A damaged flex plate can create serious (expensive) damage. Broken flex plates can not be repaired, they must be replaced. ATP flex plates are made of high quality steel and contain the correct bolt hole spacing and ring gear teeth just like the original part to ensure long life and durability
Product Features:
See More
Product Features:
- Balanced to factory specs
- Fit and function like the original parts
- Restores normal operation
ATP – Manual Transmission Flywheel (Part No.Z-287)
from
$156.99
Vehicles with manual transmissions have a flywheel. The Flywheel is where the clutch assembly is mounted. It provides a smooth friction surface for the clutch disk. Flywheels also have teeth for the starter. Flywheels can crack, break, or break starter teeth. Once a damaged flywheel is diagnosed, a new replacement is the best route to go. ATP flywheels provide fit and function just like the original part to ensure durability and long life.
Product Features:
See More
Product Features:
- Manufactured to meet or exceed original equipment specs
- No resurfacing required
- Improves performance
Hays – Sfi Flexplate:Ford 57-Up 332-428: 429-46 (Part No.12-049)
from
$178.99
Sfi Flexplate:Ford 57-Up 332-428: 429-46
Lakewood – Power Train (Part No.RM-955)
from
$189.99
Power Train
LuK – OE Quality Flywheel (Part No.LFW451)
from
$183.99
LuK: New flywheels are a smart alternative! The flywheel is an integral part of clutch replacement. It must provide a smooth, flat surface for proper clutch operation. Pairing your clutch set with a new flywheel is a smart, cost-effective alternative to resurfacing. All new – never remanufactured – every component is engineered and manufactured to OE specifications, including ring gear and dowel pins.
See More
ATP – ATP Automatic Transmission Flex Plate (Part No.Z-242)
from
$128.99
Vehicles with automatic transmissions have a flex plate. Flex plates connect the engine And transmission. Most flex plates are made of a thick piece of sheet metal with bolt holes for the torque converter And teeth for the starter. The job of a flex plate is to allow for expansion of the torque converter as engine RPM increases. The constant expansion And contraction of a flex plate over time can result cracks And/or shearing of the flex plate. A damaged flex plate can create serious (expensive) damage. Broken flex plates can not be repaired, they must be replaced. ATP flex plates are made of high quality steel And contain the correct bolt hole spacing And ring gear teeth just like the original part to ensure long life And durability
Product Features:
See More
Product Features:
- Balanced to factory specs
- Fit and function like the original parts
- Restores normal operation
ATP – Automatic Transmission Flex Plate (Part No.Z-127)
from
$70.99
Vehicles with automatic transmissions have a flex plate. The flex plates connects the engine and transmission. Most flex plates are made of a thick piece of sheet metal with bolt holes for the torque converter and teeth for the starter. The job of a flex plate is to allow for expansion of the torque converter as engine RPM increases. The constant expansion and contraction of a flex plate over time can result cracks and/or shearing of the flex plate. A damaged flex plate can create serious (expensive) damage. Broken flex plates can not be repaired, they must be replaced. ATP flex plates are made of high quality steel and contain the correct bolt hole spacing and ring gear teeth just like the original part to ensure long life and durability
Product Features:
See More
Product Features:
- Balanced to factory specs
- Fit and function like the original parts
- Restores normal operation
Dorman – Help – Flywheel Bolts Thread 7/16-20, Length .900 In. (22.86mm), Head Thickness .190 In (Part No.74070)
from
$12.99
This clutch flywheel bolt is designed to match the fit and function of the original part on specified vehicles. Made of quality materials, it is engineered for reliable performance.
Product Features:
See More
Product Features:
- Direct replacement – this clutch flywheel bolt matches the fit and function of the factory part on specified years, makes and models
- Ideal solution – this bolt is a reliable replacement for an original part that is missing or has failed due to fatigue
- Durable construction – this part is made from quality materials to ensure reliable performance and long service life
- Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience
Dorman – Flywheel Bolts – Thread Size 7/16-20; Thread Length 0.900 In. (sold by each) (Part No.678-154)
from
$3.99
This clutch flywheel bolt is designed to match the fit & function of the original part on specified vehicles. Made of quality materials, it is engineered for reliable performance.
Product Features:
See More
Product Features:
- Direct replacement – this clutch flywheel bolt matches the fit and function of the factory part on specified years, makes and models
- Ideal solution – this bolt is a reliable replacement for an original part that is missing or has failed due to fatigue
- Durable construction – this part is made from quality materials to ensure reliable performance and long service life
- Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience
- Thread Size: 7/16-20
- Tread Length: 0.900 in.
- SAE
- PLEASE NOTE: Item priced and sold by each. See store for details.
Dorman – Help – Flywheel Bolts (Part No.14557)
from
$10.49
This clutch flywheel bolt is designed to match the fit and function of the original part on specified vehicles. Made of quality materials, it is engineered for reliable performance.
Product Features:
See More
Product Features:
- Direct replacement – this clutch flywheel bolt matches the fit and function of the factory part on specified years, makes and models
- Ideal solution – this bolt is a reliable replacement for an original part that is missing or has failed due to fatigue
- Durable construction – this part is made from quality materials to ensure reliable performance and long service life
- Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience
Popular 1984 Ford LTD Clutch Systems Categories
1984 Ford LTD Clutch Systems
You count on your 1984 Ford LTD to run right. That means taking care of it with regular maintenance, necessary repairs, and the right parts. Advance Auto Parts can help with all of that thanks to our extensive inventory of trusted Clutch Systems. With 15 Clutch Systems ranging in price from $3.99 to $999.99, you’re sure to find everything you need for your 1984 Ford LTD.
Brands matter. If you want to shop a specific Clutch Systems brand, we stock 7 different brands like National, Dorman, and ATP. 1984 Ford LTD Clutch Systems start as low as $3.99!
One of the best ways to find top quality OEM or aftermarket Clutch Systems is by asking professionals. Short of that, you can shop with confidence thanks to our 183 extensive product reviews on 1984 Ford LTD Clutch Systems. Some of the top-rated Clutch Systems products we carry are Automatic Transmission Flex Plate with 1.0 stars.
Did we mention you can order your Clutch Systems from our online catalog and have them shipped right to your garage? Or, if you feel like seeing the parts first-hand, search for your nearest Advance Auto Parts location above and pick up in-store when you’re ready. Browse our full Clutch Systems inventory for your 1984 Ford LTD below to get started!
Top-Rated Clutch Systems Brands For Your 1984 Ford LTD
Trusted Clutch Systems OEM and aftermarket product brands are what Advance Auto Parts specializes in. The brands we work with are sure to keep that 1984 Ford LTD running right for years to come. In our inventory you’ll find brands like National, Dorman, ATP, and even more.
Popular Driveworks Clutch Systems
You’ll find popular Driveworks brand products across Clutch Pilot Bearings. All are waiting to get your 1984 Ford LTD back on the road. Some of the top-rated Driveworks products in these categories are:
Top-Rated National Clutch Systems
If National are what you’re looking for, our inventory holds plenty. We stock National brand Clutch Systems for your 1984 Ford LTD, and some of our most reviewed National parts include:
FAQs for 1984 Ford LTD Clutch Systems
What are the most purchased Clutch Systems for the 1984 Ford LTD?
Out of 15 Clutch Systems for the 1984 Ford LTD, the most popular in our inventory are:
from
$12.99
(2)
Flywheel Bolts Thread 7/16-20, Length .900 In. (22.86mm), Head Thickness .190 In
Flywheel Bolts
What are the top-rated 1984 Ford LTD Clutch Systems?
Top-rated Clutch Systems for your 1984 Ford LTD based on customer reviews/ratings are:
from
$66.99
(1)
Automatic Transmission Flex Plate
“This did not fit my Bronco. The tolerances were off for this product. The holes to bolt it to the crankshaft were off, and yes i tried rotating it to ”
