1984 Chrysler New Yorker Drivetrains
More 1984 Chrysler New Yorker Drivetrains Categories
If you’re looking for an original Drivetrains replacement for a 1984 Chrysler New Yorker, you can search through our selection below. You’ll also find aftermarket and OEM Drivetrains to meet your needs.
Essential 1984 Chrysler New Yorker Drivetrains
USA Standard Gear – Ring/Pinion Sets (Part No.36349)
from
$404.99
Ring/Pinion Sets
Yukon Gear – Standard Open Spider Gear Kit For ’96 And Older 8.25" Chrysler With 27 Spline Axles (Part No.16002)
from
$301.99
Yukon standard open spider gear kit for ’96 and older 8.25″ Chrysler with 27 spline axles. Yukon uses higher quality materials and better techniques than OEM to ensure a longer lasting spider gear set. All components come with a one year warranty against manufacturing defects.
Product Features:
See More
Product Features:
- Spider gear kit
- Fit Chrysler 8.25″ open differntial with 27 spline axles
- Includes two side gears, two pinion gears, cross pin shaft, cross pin bolt and spider gear thrust washers.
Yukon Gear – Master Overhaul Kit For Chrysler ’76-’04 8.25" Differential (Part No.14005)
from
$284.99
Yukon Master Overhaul kits give you all the high quality parts you need to start & finish every differential job. Yukon offers more tailor-made kits than any other manufacturer in the industry to meet your specific installation needs. This kit uses Timken bearings and races along with high quality seals and small parts. Included in this kit are carrier bearings and races, pinion bearings and races, pinion seal, complete shim kit, ring gear bolts, pinion nut, crush sleeve (if applicable), oil baffles and slingers (if applicable), Thread locking compound, marking compound with brush, and gasket. Yukon’s Master Overhaul kits are the most comprehensive and complete kits on the market. They do extensive research to ensure that every kit is specially tailored to your application.
Product Features:
See More
Product Features:
- Fits 1976-2004 Chrysler 8.25″
- Included are Timken bearings and races, pinion bearings and races, pinion seal, complete shim kit, ring gear bolts, pinion nut, crush sleeve , thread locker, marking compound with brush, and gasket.
Dorman – Spindle Washer – I.D. 23.0mm O.D. 38.0mm Thickness 3.6mm (sold by each) (Part No.618-017)
from
$3.49
This spindle nut washer is designed to match the fit and function of the original part on specified vehicles. Made of quality materials, it is engineered for reliable performance.
Product Features:
See More
Product Features:
- Direct replacement – this spindle nut washer matches the fit and function of the factory part on specified years, makes and models
- Ideal solution – this washer is a reliable replacement for an original part that is missing or has failed due to wear
- Durable construction – this part is made from quality materials to ensure reliable performance and long service life
- Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience
Sealed Power – Engine Auxiliary Shaft Bearing Set (Part No.1487M)
from
$30.99
Sealed Power® parts provide innovative designs, use leading edge materials and utilize ISO & QS certified manufacturing in order to deliver top quality products that meet the rigorous demands of today’s modern engines.
Product Features:
See More
Product Features:
- Steel-backed Babbitt lining material
- Used in automotive and high-performance
- Babbitt is designed to perform under extreme loads w/o damaging other engine parts
- Babbitt is more environmentally friendly than other material
- ISO & QS certified manufacturing
Motive Gear – Differential Gear Install Kit (Part No.C8.75IKE)
Dorman – Spindle Nut 3/4 In.-16 and M20 In.-1.0 Hex Size 1-1/16 In. and 27mm (sold by each) (Part No.615-073)
from
$4.99
This spindle nut retainer is designed to match the fit and function of the original part on specified vehicles. Made of quality materials, it is engineered for reliable performance.
Product Features:
See More
Product Features:
- Direct replacement – this spindle nut retainer matches the fit and function of the factory part on specified years, makes and models
- Ideal solution – this retainer is a reliable replacement for an original part that is missing or has failed due to fatigue
- Durable construction – this part is made from quality materials to ensure reliable performance and long service life
- Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience
Motive Gear – Differential Crush Sleeve (Part No.3507575)
Yukon Gear – 9.25" Chrysler Rear Cover Gasket (Part No.23002)
from
$12.99
9.25″ Chrysler rear cover gasket.
Product Features:
See More
Product Features:
- Cover gasket
- Fits Chrysler 9.25″ rear
Driveworks – Universal Joint (Part No.DW-316)
from
$15.99
DRIVEWORKS Universal Joints are designed to meet or exceed OE fit, form, and function. These universal joints are set to provide superior quality and easy installation. DRIVEWORKS Universal Joints are constructed from quality materials for extended durability. DRIVEWORKS Universal Joints are pre-lubricated with premium grease to provide a longer service life. The grease fittings are pre-installed to allow for easy maintenance (where applicable).
Product Features:
See More
Product Features:
- The cross is hot forged for the higher torque and horsepower
- The bearing cups are made by cold forging, having higher strength and better rigidity
- Bearig cups allow 360 lubricant distribution to bearing surfaces, and are precision-ground for maximum load-carrying capabilities
- Lubrication grooves designed to ensure grease penetration to entire journal and needle bearings
- Grease fitting in the cross allows for easy maintenance and the flexible use of the whole assembly
- Snap rings are held to strict tolerances to ensure proper cup position and retention
- Nitrile rubber seals to optimize grease retention and reduce contamination
Powertrax – No-Slip Traction System (Part No.9203923125)
from
$579.99
For vehicles that are driven daily, the Powertrax No-Slip Traction System is the latest design in quiet traction-adding differential technology. It combines the automatic street-friendly smooth operation of a limited-slip differential with the traction performance of a locking differential. The Powertrax No-Slip locker easily installs in to your differential carrier using basic tools and without affecting your ring and pinion settings. Powertrax Grip-Lok, Lock-Right Lockers and No-Slip Traction Systems automatically provide 100% traction on-demand, under the toughest circumstances. The Powertrax Grip-Pro and Grip-LS performance limited slips offer smooth dependable torque transfer and traction for the best of both worlds!The Powertrax® Lock-Right Locker provides outstanding traction for off-road machines and race vehicles. Powertrax No-Slip Traction Systems deliver excellent performance to street-driven cars and trucks.Powertrax® lockers range from the original, Lock-Right for serious straight-line performance, to the No-Slip traction system for street-able vehicles. Powertrax® offers three levels of GRIP locking differentials, ranging from the clutch-type GRIP LS with a forged steel case, the gear-driven GRIP PRO and finally the GRIP LOK for extreme traction. Powertrax® = Extreme Traction Systems!
See More
Carquest Premium – CV Axle Shaft Assembly (Part No.NCV12551)
from
$141.99
Carquest Premium constant velocity (C.V.) axle shaft assemblies are 100% new units that are designed to meet or exceed OE specifications. Every part number is tested to guarantee a proper fit and reliable performance. Carquest Premium CV axles are assembled with a specially formulated high-temperature moly grease to resist friction and wear of the bearings and joints. Our strict engineering and quality specifications ensure a long-lasting repair that is guaranteed with an industry-leading warranty.
Product Features:
See More
Product Features:
- Designed to meet or exceed OE specifications for fit, form and function
- 100% new axle and components
- New axle nut or attaching hardware included when applicable
- Bearings, races and housings are heat-treated for longer life
- Precision-engineered seal mating surfaces for leak-free performance
- High moly CV joint grease with stainless-steel boot bands
USA Standard Gear – Spartan Spring & Pin Kit, Fits Smaller Designs (Part No.17011)
from
$26.99
Spartan spring & pin kit, fits smaller designs.
Product Features:
See More
Product Features:
- Replacement spring and pin kit for Spartan Locker
- Fits Dana 30, Dana 44, AMC Model 20, AMC Model 35, and Toyota designs
- Includes 4 springs and 4 alignment pins
Driveworks – Tapered Roller Bearing (Part No.S-LM-603012)
National – Shaft Repair Sleeve (Part No.99139)
from
$39.99
National® has built a reputation as one of the most respected names in the industry. We have offered premium sealing solutions for more than 75 years. Our design team keeps pace with the industry and provides advanced solutions for today’s vehicles.
Product Features:
See More
Product Features:
- Designed to repair damaged, grooved or worn shafts
- Durable stainless steel construction for corrosion-free sealing surface that surpasses most original shaft specifications
- Ideal for a shaft where indications of seal wear, such as tracks or grooves have developed
- Ultra-thin construction (0.01/0.25mm wall thickness) allows original seal size to be used with minimal additional lip loading
- Easy to install with removable flange and installation tool
- Installation tool reduces sleeve distortion and allows for installation without removal from the shaft
Driveworks – Wheel Hub bearing (Part No.NT518502)
from
$33.99
Driveworks Wheel hub assemblies & Bearings are integrated designed, they will meet your specific vehicle application and also provide the same or better performance, durability, and reliability you expect from OE. The inside ball or tapered bearing sealed with lifetime lubrication supports the vehicle’s rolling weight and provides a smooth and quiet rotation of the wheel. The design also enables lower total system cost, easier installation and longer service lifetime. The Wheel hub assemblies & Bearings come complete with new wheel studs, hub and bearings. The assembly also includes new ABS Wheel Sensors where applicable.
Product Features:
See More
Product Features:
- High quality materials ensure long service life
- Integral raceway provides proper clearance between the roller and bearing riding surfaces
- Precision-matched components deliver smooth and quiet operation
- Broad range of designs and custom-tailored to specific applications and operating conditions
- ABS Components and Bearing Preload 100% Tested To OE Specs
- Premium seals, both inboard and outboard, protect the bearing
- Brand may vary by location
Yukon Gear – Pinion Seal For Chrysler 8.75" 42 Housing (Part No.30171)
from
$53.99
Pinion seal for Chrysler 8.75″ 42 housing.Yukon Mighty seal.
Product Features:
See More
Product Features:
- Pinion seal
- Fits Chrysler 8.75″ with ’42’ case housing
Driveworks – Camshaft Seal (Part No.S-99139)
Motive Gear – Differential Pinion Shim Kit (Part No.1109)
Yukon Gear – Pinion Nut (Part No.33142)
from
$10.99
Pinion nut for Chrysler 7.25″, 8.0″ IFS, 8.25″, 8.75″ fine spline, 9.25″ front & rear, 7/16″ x 14.
Product Features:
See More
Product Features:
- Pinion nut for Chrysler 8.0″ IFS, 8.25″, 8.75″ with 29 spline pinion and 9.25″ rear
- 7/8″ x 14 thread
USA Standard Gear – Pinion Installation Kit For Chrysler 9.25" Rear (Part No.60004)
from
$135.99
9.25″ Chrysler REAR PINION KIT .
Product Features:
See More
Product Features:
- Fits 2000 and down Chrysler 9.25″ rear
- Uses Koyo bearings and races
- Included are pinion bearings and races, pinion seal, pinion nut, crush sleeve, marking compound and brush.
USA Standard Gear – Master Overhaul Kit for Chrysler 8.75" #42 Housing with 25520/90 Differential bearings (Part No.37093)
from
$456.99
USA Standard Master Overhaul kits let you finish your install with confidence. This kit uses Koyo bearings and races. Included are carrier bearings and races, pinion bearings and races, pinion seal, complete shim kit, ring gear bolts, pinion nut, crush sleeve (if applicable), oil baffles and slingers (if applicable), threading locking compound, marking compound with brush and gasket.
Product Features:
See More
Product Features:
- Fits Chrysler 8.75″ ’42’ case housing with 25520 carrier races
- Uses Koyo bearings and races
- Included are carrier bearings and races, pinion bearings and races, pinion seal, complete shim kit, ring gear bolts, pinion nut, crush sleeve, thread locker, marking compound with brush and gasket.
Yukon Gear – Ring Gear Bolt For Chrysler 7.25", 8" IFS, 8.25", 8.75" & GM 7.2" IFS Front (Part No.33035)
from
$8.99
Ring gear bolt for Chrysler 7.25″, 8″ IFS, 8.25″, 8.75″ & GM 7.2″ IFS front. 3/8″ x 24.
Product Features:
See More
Product Features:
- Ring gear bolt for Chrysler 7.25″, 8.0″ IFS and 8.75″
- 3/8″ x 24 thread
- .866″ long
Pro-King – Differential Ring Gear Bolt (Part No.742G935)
from
$1.99
Pro-King is the leading supplier of transmission and driveline products in the aftermarket.
Product Features:
See More
Product Features:
- All products are designed to meet or exceed OE quality, form, fit and funtion.
Dorman – Standard Spindle Nut 3/4 In.-16 Hex Size 1-1/16 In. (sold by each) (Part No.615-072)
from
$3.99
This spindle nut is designed to match the fit and function of the original part on specified vehicles. Made of quality materials, it is engineered for reliable performance.
Product Features:
See More
Product Features:
- Direct replacement – this spindle nut matches the fit and function of the factory part on specified years, makes and models
- Ideal solution – this nut is a reliable replacement for an original part that is missing or has failed due to fatigue
- Durable construction – this part is made from quality materials to ensure reliable performance and long service life
- Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience
Dorman – Spindle Nut 3/4 In.-16 Hex 1-1/16 In. (sold by each) (Part No.615-016)
from
$6.99
This spindle nut is designed to match the fit and function of the original part on specified vehicles. Made of quality materials, it is engineered for reliable performance.
Product Features:
See More
Product Features:
- Direct replacement – this spindle nut matches the fit and function of the factory part on specified years, makes and models
- Ideal solution – this nut is a reliable replacement for an original part that is missing or has failed due to fatigue
- Durable construction – this part is made from quality materials to ensure reliable performance and long service life
- Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience
Dorman – Help – C.V. Joint Bolted Split Boot Kit Outer (Part No.03605)
from
$17.99
Our CV Joint Boots provide various methods of eliminating the removal of the CV joint during installation. Uni-Fit boots can be stretched over the CV Joint and Quick Boots come in halves.
Product Features:
See More
Product Features:
- Save labor with easy installation methods
- Comes with grease and bands
- Rugged silicone or neoprene materials offer a high resistance to cracking, rotting and leaking
- The Speedi and Quick Boot are installed without special tools
Dorman – Uni-Fit C.V. Joint Boot Kit Inner up to 3.58 In. Diameter (Part No.614-002)
from
$35.99
This CV joint boot kit contains the parts required to repair the CV joint on specified vehicles without removing the joint itself. Made of quality components, this kit is engineered for reliable performance and durability.
Product Features:
See More
Product Features:
- Direct replacement – this CV joint boot kit contains the parts required to repair the CV joint on specified vehicles without removing the joint itself
- Ideal solution – this kit is a reliable replacement for original components that have failed due to wear
- Durable construction – this kit is made from quality components to ensure reliable performance and a long service life
- Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience
Popular 1984 Chrysler New Yorker Drivetrains Categories
1984 Chrysler New Yorker Drivetrains
You count on your 1984 Chrysler New Yorker to run right. That means taking care of it with regular maintenance, necessary repairs, and the right parts. Advance Auto Parts can help with all of that thanks to our extensive inventory of trusted Drivetrains. With 47 Drivetrains ranging in price from $2.49 to $527.99, you’re sure to find everything you need for your 1984 Chrysler New Yorker.
Brands matter. If you want to shop a specific Drivetrains brand, we stock 10 different brands like Dorman, Motive Gear, and Moog. 1984 Chrysler New Yorker Drivetrains start as low as $2.49!
One of the best ways to find top quality OEM or aftermarket Drivetrains is by asking professionals. Short of that, you can shop with confidence thanks to our 182 extensive product reviews on 1984 Chrysler New Yorker Drivetrains. Some of the top-rated Drivetrains products we carry are Differential Crush Sleeve with 5.0 stars and Differential Pinion Shim Kit with 5.0 stars.
Did we mention you can order your Drivetrains from our online catalog and have them shipped right to your garage? Or, if you feel like seeing the parts first-hand, search for your nearest Advance Auto Parts location above and pick up in-store when you’re ready. Browse our full Drivetrains inventory for your 1984 Chrysler New Yorker below to get started!
Top-Rated Drivetrains Brands For Your 1984 Chrysler New Yorker
Trusted Drivetrains OEM and aftermarket product brands are what Advance Auto Parts specializes in. The brands we work with are sure to keep that 1984 Chrysler New Yorker running right for years to come. In our inventory you’ll find brands like Dorman, Motive Gear, Moog, and even more.
Popular Driveworks Drivetrains
You’ll find popular Driveworks brand products across Hubs and Hub Assemblies. All are waiting to get your 1984 Chrysler New Yorker back on the road. Some of the top-rated Driveworks products in these categories are:
Top-Rated Dorman Drivetrains
If Dorman are what you’re looking for, our inventory holds plenty. We stock Dorman brand Drivetrains for your 1984 Chrysler New Yorker, and some of our most reviewed Dorman parts include:
FAQs for 1984 Chrysler New Yorker Drivetrains
What are the most purchased Drivetrains for the 1984 Chrysler New Yorker?
Out of 47 Drivetrains for the 1984 Chrysler New Yorker, the most popular in our inventory are:
from
$4.99
(3)
Spindle Nut 3/4 In.-16 and M20 In.-1.0 Hex Size 1-1/16 In. and 27mm
Spindle Retainers
from
$4.99
This product is not rated
Spindle Nut 3/4 In.-16 and M20 In.-1.0 Hex Size 1-1/16 In. and 27mm (sold by each)
Spindle Retainers
What are the top-rated 1984 Chrysler New Yorker Drivetrains?
Top-rated Drivetrains for your 1984 Chrysler New Yorker based on customer reviews/ratings are:
from
$39.99
(1)
Shaft Repair Sleeve
“used these speedy sleeves on the front axle of my Kubota with the wheel seals,saved me from spending 15 times more on the axle’s, Thank’s”
