1983 Jeep CJ5 Suspension Parts

Essential 1983 Jeep CJ5 Suspension Parts

Rugged Ridge – Polyurethane Bushing Kit (Part No.18350.02)

Polyurethane Bushing Kit

from

$359.99
This red total bushing kit includes all of the bushings you can replace on your Jeep and once installed provides better handling and control of your Wrangler. They are made of polyurethane which is a stronger replacement than rubber and lasts for as long

Product Features:
  • Polyurethane
  • OE Style
  • Better Handling and Control
  • Long-lasting
  • Limited 5 Year Warranty
See More

MOOG – Leaf Spring Shackle Bushing (Part No.K3194)

Leaf Spring Shackle Bushing

from

$8.79
By constantly introducing design enhancements that extend product life and simplify installation and replacement, MOOG has earned its reputation as the chassis industry’s Problem Solver.

Product Features:
  • Easy to install
  • Restores like-new steering and handling
  • Engineered to provide long life and dependability
  • Construction and design validated by MOOG engineers
  • Incorporates proven design and engineering features
See More

Crown Auto Jeep Replacmnt – Oem Replacement, Stock Height, Center Mount, Single (Part No.J5355689)

Oem Replacement, Stock Height, Center Mount, Single

from

$29.99
Crown Automotive continues to be the leader in quality replacement parts for Jeep(R) vehicles. Crown has the largest stock of replacement parts for Jeep(R) vehicles, including factory discontinued parts. In fact, many of the older Jeeps are still on (and off) the road thanks to Crown parts. The Crown line consists of axle, body, brake, clutch, cooling, driveline, electrical, engine, exhaust, fuel, steering, suspension, transmission And transfer case components. Crown Automotive also offers an exclusive line of component kits And accessory products.

Product Features:
  • Leading Manufacturer Of Quality Replacement Parts For Jeep
  • Meets Standards For Quality
  • Crown Automotive Has Consistently Maintained Its Commitment To Offering Only Quality Parts And Exceptional Service
  • Easy Installation
See More

Omix – Shock Absorber Grommet (Part No.18270.20)

Shock Absorber Grommet

from

$7.49
Direct OE replacement Jeep parts and accessories built to the original specifications by Omix-ADA. Limited five year Manufacturer’s warranty.

Product Features:
  • Rubber
  • OE Style
  • Direct Fit
  • Limited 5 Year Warranty
See More

Monroe – Shock-Mate Shock Absorber Boot Kit (Part No.SA1997)

Shock-Mate Shock Absorber Boot Kit

from

$13.99
Monroe® Shock-Mate® Shock Absorber Boot Kits are universal replacement shock boots use to protect the shock’s piston rod from dirt, mud and other contaminants – protecting the life of your shocks.

Product Features:
  • Protects the shock’s piston rod from damage
  • Universal design for easy installation
  • Tie-strap included for a secure fit
  • Constructed from high quality urethane for maximum durability
  • Multiple color choices available
See More

Omix – Frame Crossmember (Part No.12029.04)

Frame Crossmember

from

$152.99
Direct OE replacement Jeep parts and accessories built to the original specifications by Omix-ADA. Limited five year Manufacturer’s warranty.

Product Features:
  • Steel
  • OE Style
  • Direct Fit
  • Welding required
  • Limited 5 Year Warranty
See More

Energy Suspension – Bump Stop Set (Part No.9.9137R)

Bump Stop Set

from

$29.99
Energy Suspension performance bump stops help cushion a collapsing suspension, preventing bottoming-out and expensive vehicle damage. Hyper-Flex performance polyurethane bump stops for control arms, traction bars, leaf springs, etc. are guaranteed to last longer and operate more efficiently than original rubber stops. The smaller, general purpose bullet shaped snubber is ideal for control arms. the low profile button head is for use when clearance is limited. Our large competition race style bump stops smooth out compression better and have a large reinforced metal plate welded to the mounting plate and molded-in. Each style is specially designed for a perfect and custom fit and each style has it’s own durometer, hardness, characteristics. Energy’s wide selection of bump stops are available in red or black color.

Product Features:
  • Made of Superior Hyper-Flex+ Material
  • Helps Prevent Damage to Shocks/Struts
See More

Crown Auto Jeep Replacmnt – No Lift, With Bushing (Part No.5357499K)

No Lift, With Bushing

from

$18.49
Crown Automotive continues to be the leader in quality replacement parts for Jeep(R) vehicles. Crown has the largest stock of replacement parts for Jeep(R) vehicles, including factory discontinued parts. In fact, many of the older Jeeps are still on (and off) the road thanks to Crown parts. The Crown line consists of axle, body, brake, clutch, cooling, driveline, electrical, engine, exhaust, fuel, steering, suspension, transmission And transfer case components. Crown Automotive also offers an exclusive line of component kits And accessory products.

Product Features:
  • Metal Construction
  • Leading Manufacturer Of Quality Replacement Parts For Jeep (R)
  • Meets Standards For Quality
  • Crown Automotive Has Consistently Maintained Its Commitment To Offering Only Quality Parts And Exceptional Service
  • Easy Installation
See More

Rugged Ridge – Shackle (Part No.18265.08)

Shackle

from

$199.99
This pair of steel heavy-duty, easily greased front leaf spring shackles from Rugged Ridge adds 1 inch of lift. Direct fit with a bolt on application. Red bushings included.

Product Features:
  • Steel
  • Adds 1 in. of Lift
  • Pair
  • Direct Fit
  • Limited 5 Year Warranty
See More

Rancho – RS5000X Shock Absorber (Part No.RS55113)

RS5000X Shock Absorber

from

$85.99
Featuring a unique, exclusive valving system and advanced compression functionality, Rancho® RS5000®X shocks deliver improved overall on- and off-road handling and performance.

Product Features:
  • IMPROVED HANDLING AND PERFORMANCE — Cross Tuned technology featuring exclusive rebound valving system and advanced compression phase improves overall handling and performance on and off road
  • MINIMIZES ROUGH RIDE — Exclusive Progressive Engagement Valving is custom-tuned for each vehicle to help reduce initial impacts at low speeds and minimizes a rough ride
  • STRONG AND DURABLE — Features a 16mm nitro-carburized piston rod to resist scuffs & corrosion, double-welded loops at stress areas, 35mm sintered iron piston for enhanced structural integrity and polyvinyl protective boot
  • HANDLES EXTREME TEMPERATURE CHANGES — Large twin-tube body filled with all-weather fluid allows for cooler operation, increased vehicle control and ability to withstand internal temperatures of -40 to 248°F
  • SMOOTH PERFORMANCE — Polyurethane rebound bumper and rubber bushings help absorb ride harshness while the fluon-banded piston enhances responsiveness to changing road conditions for an overall smoother ride
  • REDUCES FADE — Nitrogen gas pressurized to 150 PSI to minimize air-to-oil mixture to reduce damping performance fade and foaming
  • MAINTAINS VEHICLE CONTROL — Compression Control Valve is custom-tuned for each vehicle to regulate fluid transfer to absorb impacts without disc flutter and help maintain shock motion control
  • BUILT TO LAST — Low-friction, self-lubricating seal retains gas and oil for quicker rebound and smoother compression while the application-specific piston delivers heightened control of shock motion due to the expanded piston area
  • Rebound Bumper
See More

Monroe – Gas-Matic Truck Shock Absorber (Part No.59001)

Gas-Matic Truck Shock Absorber

from

$48.49
Monroe® Gas-Matic truck shock absorber are gas charged and provide improved control at an economical price.

Product Features:
  • Available for import and domestic light trucks and vans
  • Gas-charged unit
  • Improved handling and control
  • Economical OE replacement
  • Meets OE product specifications
See More

Energy Suspension – Bump Stop Set (Part No.9.9137G)

Bump Stop Set

from

$30.99
Energy Suspension performance bump stops help cushion a collapsing suspension, preventing bottoming-out and expensive vehicle damage. Hyper-Flex performance polyurethane bump stops for control arms, traction bars, leaf springs, etc. are guaranteed to last longer and operate more efficiently than original rubber stops. The smaller, general purpose bullet shaped snubber is ideal for control arms. the low profile button head is for use when clearance is limited. Our large competition race style bump stops smooth out compression better and have a large reinforced metal plate welded to the mounting plate and molded-in. Each style is specially designed for a perfect and custom fit and each style has it’s own durometer, hardness, characteristics. Energy’s wide selection of bump stops are available in red or black color.

Product Features:
  • Made of Superior Hyper-Flex+ Material
  • Helps Prevent Damage to Shocks/Struts
See More

Crown Auto Jeep Replacmnt – Black, Viton (Part No.J5355369)

Black, Viton

from

$12.79
Crown Automotive continues to be the leader in quality replacement parts for Jeep(R) vehicles. Crown has the largest stock of replacement parts for Jeep(R) vehicles, including factory discontinued parts. In fact, many of the older Jeeps are still on (and off) the road thanks to Crown parts. The Crown line consists of axle, body, brake, clutch, cooling, driveline, electrical, engine, exhaust, fuel, steering, suspension, transmission And transfer case components. Crown Automotive also offers an exclusive line of component kits And accessory products.

Product Features:
  • Limited 12 Month Or 12,000 Mile Warranty
See More

Omix – Leaf Spring Bushing (Part No.18271.18)

Leaf Spring Bushing

from

$11.29
Direct OE replacement Jeep parts and accessories built to the original specifications by Omix-ADA. Limited five year Manufacturer’s warranty.

Product Features:
  • Main Eye
  • OE Style
  • Direct Fit
  • Limited 5 Year Warranty
See More

Omix – Leaf Spring Plate (Part No.18271.15)

Leaf Spring Plate

from

$38.99
Direct OE replacement Jeep parts and accessories built to the original specifications by Omix-ADA. Limited five year Manufacturer’s warranty.

Product Features:
  • Left Side
  • OE Style
  • Direct Fit
  • Limited 5 Year Warranty
See More

Omix – Leaf Spring Plate (Part No.18271.12)

Leaf Spring Plate

from

$31.49
Direct OE replacement Jeep parts and accessories built to the original specifications by Omix-ADA. Limited five year Manufacturer’s warranty.

Product Features:
  • Left Side
  • OE Style
  • Direct Fit
  • Limited 5 Year Warranty
See More

Omix – U-Bolt Nut (Part No.18204.13)

U-Bolt Nut

from

$3.29
Nut, U-Bolt 1/2-20 inch, 1976-1986 CJ, 1987-1995 Wrangler

Product Features:
  • Sold Individually
  • OE Style
  • Direct Fit
  • Limited 5 Year Warranty
See More

Omix – Nut Long U-Bolt 41-71 (Part No.18204.10)

Nut Long U-Bolt 41-71

from

$3.29
Own a Jeep? The toughest four letter word on wheels. Are you looking for a parts source rugged enough to match your off the beaten path sense of adventure? With more than 11,000 unique part numbers from brands like Omix-ADA, Rugged Ridge, Alloy USA, Outland Automotive, ORV Suspension and Precision Gear, consider this your trail guide to the 4×4 of your dreams. A go anywhere, anytime, in any weather vehicle. Go ahead and smile, because it’s going to take a lot of courage not to be cocky when you Own a Jeep like that? Omix-ADA is more than just a parts manufacturer, they’re a community of enthusiasts dedicated to producing the finest in off-road solutions. Our products have been propelling four-wheel drive vehicles down highways, back roads and over the world’s roughest terrain for about two decades. Omix’s team of engineers have developed, tested and trail ridden many of our 11,000+ products until they were perfected for you. Omix-Ada is proud to have one of the most capable Research and Development, Engineering, and Product Design teams in the automotive aftermarket. By utilizing the latest in 3D Computer Aided Design and Finite Element Analysis, and coupling these tools with our decades of market experience, we are able to develop products that give our customers the highest value parts possible.
See More

Omix – Gas Shock Absorber (Part No.18203.04)

Gas Shock Absorber

from

$75.99
Is your Jeep bouncing and swaying when you drive on the road? If you push down hard on one corner of your Jeep and then release it, does it rebound more than once? If so, there’s a good chance that the shocks have worn out. Omix-ADA offers high quality re

Product Features:
  • Front Or Rear
  • OE Style
  • Direct Fit
  • Limited 5 Year Warranty
See More

KYB – Gas Shock (Part No.344426)

Gas Shock

from

$52.99
Ride Comfort may be important, but restoring a vehicles Ride Control, stability, stopping, lane change responsiveness and handling is critical. KYB Excel-G Shocks and Struts are designed for the most important performance purpose: Restoring the vehicles original capabilities. KYB is a world leading supplier of shocks and struts to new vehicle manufacturers and the Excel-G is made on the very same KYB OE assembly lines, uses the same OE quality components and is calibrated to restore original, designed performance, not change it. That has earned Excel-G the classification: OEA (Original Equipment for the Aftermarket). The KYB Excel-G is a nitrogen gas-charged, twin-tube design that includes every quality component that our global OEM products include and it is the preferred choice by professional technicians.

Product Features:
  • KYB Recommended Orem Replacement Shock For Domestic Trucks
  • The KYB Excel-G Helps Restore The Designed Control And Handling Of Your Vehicle
  • The KYB Excel-G Uses A Triple Lip Fluid Seal To Reduce The Chance Of Oil And Gas Leaking Out
  • Vehicle Specific, Hand Assembled, In-House Damping Valves Correctly Manage Tire Contact, Steering Response And Body Movement
  • Electronic Safety Systems Depend On The Suspension, Brakes And Tires Operating As The Vehicle Manufacturer Intended. The KYB Excel-G Helps Keep Electronic Safety Systems Performing As Designed.
  • KYB Has The Strongest And Thickest Strut Bodies And Brackets In The Industry; Minimizing Flex To Maintain Correct Alignment In All Conditions
See More

Skyjacker – Hydro Shock W/Red Boot (Part No.H7023)

Hydro Shock W/Red Boot

from

$58.99
HYDRO H7000 series shocks are recommended for multiple shock applications and mild to moderate off-road use. Skyjacker(R) hydro shocks, Skyjacker(R) suspensions offers you a high quality shock absorber with true velocity sensitive valving. Shock absorbers, or spring dampers as it is called everywhere else except in the U.S, control the rate at which suspension springs compress and rebound. As the shock is pushed together, this is called bump or compression. As the shock expands, this is called rebound or extension. Absorbing the shock of bumps and suspension loading is actually performed by the springs in the suspension. The shock real job is controlling the energy stored in the springs. The performance specific internal components of Skyjacker shocks respond to the on- and off-road conditions instantly. Whether you are going over rough or smooth terrain at slow or fast speeds, the true velocity sensitive valving produces a stable, controlled level of resistance for better handling, improved stability, and maximum comfort. The technological innovations of these durable, long lasting shocks from Skyjacker(R) deliver a noticeable advantage over the original equipment and other shock dampeners. Skyjacker shock absorbers deliver a safe, comfortable ride with improved handling and stability. They keep the tires in contact with the terrain and put you in control of the road ahead

Product Features:
  • Hydraulic Action. Leak Proof Seal Prevents Hydraulic Fluid From Passing Around Piston Head For A Consistent And Reliable Ride
  • Multi Stage Velocity Sensitive Valving
  • Twin Tube Construction. DOM Tubing Reduces Internal Wear For Longer Product Life
  • Bonded Iron Piston For Durability And Longer Shock Life
  • Chromed Piston Rod Features Micro Polished Shaft For Improved Product Life And Performance
  • Orifice Disk For Axle Control In Any Condition
  • Red Polyurethane Bushings
See More

Omix – Leaf Spring (Part No.18202.11)

Leaf Spring

from

$229.99
Direct OE replacement Jeep parts and accessories built to the original specifications by Omix-ADA. Limited five year Manufacturer’s warranty.

Product Features:
  • 6 Leaf
  • Left Or Right Side
  • Direct Fit
  • Limited 5 Year Warranty
See More

Omix – Leaf Spring (Part No.18201.11)

Leaf Spring

from

$214.99
Direct OE replacement Jeep parts and accessories built to the original specifications by Omix-ADA. Limited five year Manufacturer’s warranty.

Product Features:
  • 6 Leaf
  • Left Or Right Side
  • Direct Fit
  • Limited 5 Year Warranty
See More

Omix – Leaf Spring (Part No.18202.10)

Leaf Spring

from

$186.99
Direct OE replacement Jeep parts and accessories built to the original specifications by Omix-ADA. Limited five year Manufacturer’s warranty.

Product Features:
  • 4 Leaf
  • Left Or Right Side
  • Direct Fit
  • Limited 5 Year Warranty
See More

Monroe – Shock-Mate Shock Absorber Boot Kit (Part No.SA1998)

Shock-Mate Shock Absorber Boot Kit

from

$13.29
Monroe® Shock-Mate® Shock Absorber Boot Kits are universal replacement shock boots use to protect the shock’s piston rod from dirt, mud and other contaminants – protecting the life of your shocks.

Product Features:
  • Protects the shock’s piston rod from damage
  • Universal design for easy installation
  • Tie-strap included for a secure fit
  • Constructed from high quality urethane for maximum durability
  • Multiple color choices available
See More

1983 Jeep CJ5 Suspension Parts

You count on your 1983 Jeep CJ5 to run right. That means taking care of it with regular maintenance, necessary repairs, and the right parts. Advance Auto Parts can help with all of that thanks to our extensive inventory of trusted Suspension Parts. With 78 Suspension Parts ranging in price from $3.29 to $276.99, you’re sure to find everything you need for your 1983 Jeep CJ5.

Brands matter. If you want to shop a specific Suspension Parts brand, we stock 11 different brands like Monroe, Rancho, and Omix. 1983 Jeep CJ5 Suspension Parts start as low as $3.29!

One of the best ways to find top quality OEM or aftermarket Suspension Parts is by asking professionals. Short of that, you can shop with confidence thanks to our 250 extensive product reviews on 1983 Jeep CJ5 Suspension Parts. Some of the top-rated Suspension Parts products we carry are RS5000 Shock Absorber with 4.2 stars and Gas-Matic LT Shock Absorber with 5.0 stars.

Did we mention you can order your Suspension Parts from our online catalog and have them shipped right to your garage? Or, if you feel like seeing the parts first-hand, search for your nearest Advance Auto Parts location above and pick up in-store when you’re ready. Browse our full Suspension Parts inventory for your 1983 Jeep CJ5 below to get started!

Top-Rated Suspension Parts Brands For Your 1983 Jeep CJ5

Trusted Suspension Parts OEM and aftermarket product brands are what Advance Auto Parts specializes in. The brands we work with are sure to keep that 1983 Jeep CJ5 running right for years to come. In our inventory you’ll find brands like Monroe, Rancho, Omix, and even more.

Popular Rugged Ridge Suspension Parts

You’ll find popular Rugged Ridge brand products across Coil and Leaf Springs. All are waiting to get your 1983 Jeep CJ5 back on the road. Some of the top-rated Rugged Ridge products in these categories are:
Leaf Spring Bushing
from $95.99
(10)
Leaf Spring Bushing
Leaf Spring Bushings

FAQs for 1983 Jeep CJ5 Suspension Parts

What are the most purchased Suspension Parts for the 1983 Jeep CJ5?

Out of 78 Suspension Parts for the 1983 Jeep CJ5, the most popular in our inventory are:
Gas-Matic Truck Shock Absorber
from $42.49
(4)
Gas-Matic Truck Shock Absorber
Rear Shock and Struts
RS5000X Shock Absorber
from $85.99
(3)
RS5000X Shock Absorber
Front Shock and Struts
Gas-Magnum Shock Absorber
from $50.99
This product is not rated
Gas-Magnum Shock Absorber
Front Shock and Struts

What are the top-rated 1983 Jeep CJ5 Suspension Parts?

Top-rated Suspension Parts for your 1983 Jeep CJ5 based on customer reviews/ratings are:
RS5000 Shock Absorber
from $66.99
(10)
RS5000 Shock Absorber
“I’m not a professional mechanic, but these were installed using some analytical thinking. The diameter of shocks is larger than stock, and the fit wa”
Gas-Matic LT Shock Absorber
from $38.99
(1)
Gas-Matic LT Shock Absorber
“I bought these for my 1968 f250 2wd truck. They fit perfect and give the truck a nice ride.”
U-Bolt Nut
from $3.29
(1)
U-Bolt Nut
“i am a very inexperienced welder. I find this rod is very versatile and forgiving. Easy to usa end burns good in my welder.”